LogiTech QuickCam webcam does not create /dev/video0

I have followed the Arch Webcam Wiki, and read numerous posts to get my QuickCam working and I can not seem to get it to create the /dev/video0 .
dmesg sees that it is connected:
usb 1-1: new full speed USB device using uhci_hcd and address 4
usb 1-1: configuration #1 chosen from 1 choice
I am using the spca5xx driver which I got from http://mxhaard.free.fr/spca5xx.html and I was able to compile and install it with no problem.
lsmod | grep spca shows:
lsmod | grep spca
spca5xx 672208 0
videodev 7808 1 spca5xx
usbcore 113796 3 uhci_hcd,spca5xx
lsusb shows:
Bus 002 Device 001: ID 0000:0000
Bus 001 Device 004: ID 046d:092e Logitech, Inc.
Bus 001 Device 002: ID 05e3:0606 Genesys Logic, Inc.
Bus 001 Device 001: ID 0000:0000
Bus 003 Device 001: ID 0000:0000
I tried recompiling the kernel as it was suggested in a few of the WebCam posts in this forum but I still do not get /dev/video0. Any ideas??
Thank you.

Thanks for your help. I took the webcam back and exchanged it for a QuickCam Fusion. This cam uses the the USB Video class drivers available at http://linux-uvc.berlios.de/ and I was able to get the webcam to work, but only in Ekiga, no other apps support it at this time. I will just wait until applications are updated and support it.
Thank you.[/url]

Similar Messages

Motorola W385 does not create /dev/cu.usbmodem device

Hello, I have a relatively difficult issue...
I am trying to use Moto4lin, complied myself from svn, the binary image on the site also has the same problem.
When I plug in my phone there is no /dev/cu.usbmodem.* device created.
As a matter of fact, the usb device is not detected period. The usb device has vendor ID 0x22b8 and product ID 0x2b44.
I am able to get this device to work with moto4lin in linux by first loading the usbserial module with: modprobe usbserial vendor=0x22b8 product=0x2b44.
I am able to get my friends RAZOR to work perfectly fine with my compiled moto4lin. (/dev/cu.usbmodem is created and I am able to connect the phone).
The device is simply not being recognized by the kext. I am thinking that the Info.plist simply does not contain the specified product/vendor id.
All that I need to know is which kext is the one that I should append to.
I tried InternalUSBModem.kext; however, that seems to be apple only hardware.
I know that this is an obscure problem and any help on this would be greatly appreciated. I also fully understand that anything recommended is my problem if it does not work.
Thank You in advance.

Thanks for your help. I took the webcam back and exchanged it for a QuickCam Fusion. This cam uses the the USB Video class drivers available at http://linux-uvc.berlios.de/ and I was able to get the webcam to work, but only in Ekiga, no other apps support it at this time. I will just wait until applications are updated and support it.
Thank you.[/url]

Save as does not Create PDF Compatible File even when the creare pdf compatible files is on, Illustrator CC 2014

save as does not Create PDF Compatible File even when the creare pdf compatible files is on, Illustrator CC 2014

When I open is adobe acrobat I get this message.
"This is an Adobe® Illustrator® File that was
saved without PDF Content.
To Place or open this le in other
applications, it should be re-saved from
Adobe Illustrator with the "Create PDF
Compatible File" option turned on. This
option is in the Illustrator Native Format
Options dialog box, which appears when
saving an Adobe Illustrator le using the
Save As command."

Satellite U400 - the webcam does not work anymore

Hello guys here is my sudden probloema!
About a year ago I purchased a laptop
TOSHIBA - Satellite U400
with s.o. WinVista 32bit and with integrated webcam chicony etc. ....
For a year, everything worked correctly, but for some days now, the webcam does not work anymore.
As soon as I try to open it, a message of management software cam that says "Webcam driver open fail, please restart or computer room"
I tried to do it all: aggioronato and downloaded the drivers from toshiba, uninstalled the program and re installed the webcam ....! updated bios notebook ....! useless!
the strange thing .. well that going into device manager ... the webcam is not there ....! but if the launch seems to open just then check quell caz ... Warning!!
Gan you help me?
Graziee

Are you familiar and comfortable with LINUX LIVE bootable discs to load an alternative operating system with unobtrusive but extensive Toshiba device support so you can determine if your webcam hardware is ruined or if the problem is software and possibly solved reinstalling Windows ?
At this point, you're pondering less time consuming but more expensive choices such as buying another web cam, or another computer and you might be temporarily borrowing someone else's web cam / using a non preferred spare web cam that isn't optimal for your needs.
Continuously downloading software, registry cleaners, and repeatedly reinstalling drivers will eventually ruin your Windows installation and consume more time than you've wasted so far and still doesn't guarantee to fix your malfunction.

Satellite Pro M30 Win 7 - webcam does not work on msn messenger

Hi all
I have a Satellite Pro M30 Modell Nr.: PSM35E and have just changed to Windows 7. But the Nvidia Card NVIDIA GeForceTM FX Go5200 Grafik mit 64 MB RAM does not work properly.
I could find a driver from Vista and installed it, have Aero pics on the desktop, but my webcam does not work on msn messenger and this is the only way for me to see my family.
Can someone help me?
Thanks for your help

Hi
Im a little bit confused; do you have some problems with the graphic card or with the webcam?
I assume you are speaking about external webcam connected to the USB port? Right?
What happens if you connect the webcam to the notebook? Can Win 7 recognize the connected device? Did you install additional drivers for this webcam?
In most cases its necessary to do that because I think its not plug & play device.

MRP does not creates Shcedule Line

I have a valid scheduling agreement LPA in place. Scheduling Agreement is approved and released status.
I have source list also maintained for same scheduling agreement with long validity and MRP indicator as 2 - Create Schedule line automatically.
I am running MRP using following parameters in MD02.
Processing key          NETCH               Net Change in Total Horizon
Create purchase req.    3                   Planned orders
Delivery schedules      3                   Schedule lines
Create MRP list         1                   MRP list
Planning mode           3                   Delete and recreate planning data
Scheduling              2                   Lead Time Scheduling and Capacity Planni
Even schedule line and other parameters maintained properly, MRP creates planned order and does not creates Schedule Line automatically. Material Master is maintained MRP Type PD, Lot Size as Replenishment to maximum stock level, Safety stock, No strategy and availability on.
What I am doing wrong? With same setting in other system it is working perfectly fine.
Any feedback appreciated.
Thanks
PP

Hi
Check whether the Agreement Open Target value .
If the target quantity was completed . so system will not create the Schedule lines for the material
2. If you mainatian the open period in the smk.
so system will create the planned order instead of schedule agreement. check

Mail does not create new emails based on the highlighted mailbox, but rather the receiving mailbox of whatever individual email happens to be highlighted. This was not the case prior to Lion. Is this a bug or an error on my part?

Mail does not create new emails based on the highlighted mailbox, but rather according the receiving mailbox of whatever individual email happens to be highlighted. This was not the case prior to Lion. Is this a bug or an error on my part? (I do have the setting for creating new emails from the highlighted mailbox checked.)

The questions about time was not only because of thinking about the Time Machine, but also possible impact on recognizing which messages remaining on a POP server (doesn't apply to IMAP) have been already downloaded. In the Mail folder, at its root level, in Mail 3.x there is a file named MessageUidsAlreadyDownloaded3 that should prevent duplicate downloading -- some servers may not communicate the best with respect to that, and the universal index must certainly be involved in updating that index file. If it corrupts, it can inhibit proper downloading. However, setting the account up in a New User Account and having the same problem does not point that way, unless your POP3 server is very different from most.
That universal index is also typically involved when messages are meant to be moved from the Inbox to another mailbox -- in Mail 3.x the message does not move, but rather is copied, and then erased from the origin mailbox. That requires updating the Envelope Index to keep track of where the message is, and should keep track of where it is supposed to have been removed after the "Move".
Ernie

Microsof VX 3000 or 6000 Webcam does not work with Lync 2013 under Windows 8.1

Hi,
The problem is that i cannot use the Microsoft VX-3000 or VX-6000 with Lync 2013 under Windows 8.1.
If i go in settings under Video i can see the preview from the webcam just fine, so it works there no problem.
Wenn i try to enable my camera in a conference it does not work, i get an error: Your video cannot be started.
Now, there are no Windows 8.1 drivers for the Webcam so i installed the latest Windows 7 drivers. Because of that this webcam does not work with apps, that is fine i understand the driver problem and the way the new apps work.
But this Webcam works with skype under Windows 8.1 and it works with Lync 2010 client.
The same Webcam works just fine with Lync 2013 under Windows 7.
Is there anything i could do so that i get this Webcam to work with Lync 2013 desktop client under Windows 8.1?
Thanks

Hi,
According to your description, it may be caused by driver.
You can try to install the latest version of Display Driver to fix the display issue.
Since there is no driver for Windows 8.1, I suggest you wait for updating.
You can also post a case on Windows 8 forum, thank you for your understanding:
http://social.technet.microsoft.com/Forums/en-US/home?forum=W8ITProPreRel%2Cw81previtpro&filter=alltypes&sort=lastpostdesc
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support

Adobe After Effects CC 2014 Multi-machine rendering does not create RCF after Collect-File

This was working in the previous release. After going through all of the steps to perform a multi-machine render, not only does it say it is limiting it to 5 machines instead of the usual 99 (and I have over 100 cores on the render farm) but "Collect Files" (File/Dependencies/Collect Files) does not create the Render Control File (RCF) that kicks off the process on the other machines, like it did before and is supposed to do.
This release was supposed to fix the 32 core limitation on render nodes (my server has 48), but now does nothing at all.
Anyway, I assume there is a check box somewhere that says "do something" that hasn't been checked and another that says "Maybe my machine has more than 5 cores", and I would appreciate being steered in the direction of these new mis-features.
Just as background, the 48 core server does show the little TV screen that monitors the watch folder, and I know for a fact that process looks for the "RCF" file. Looking at the directory specified for "collect files", I can see that no RCF file is created, only 1 file, a report.txt file which contains this information is produced:
Report created:
7/9/2014 1:54:12 AM
Project name: highup.aep
Source files collected to:
P:\temp\highup folder
Source files collected: All
Collected comps:
Thomas Falke - High Again High On Emotion)
Number of collected files: 1
Size of collected files: 63.4 MB
Collected source files:
C:\Users\Jeff K\Videos\Down\2014-2015\Thomas Falke - High Again High On Emotion).mp4
Rendering plug-ins:
Classic 3D
Effects used: 1
Effect: Detail-preserving Upscale

The dialog box has been slightly refactored. You must click "Allow watch folder rendering" and then all is good. Hope this helps anyone else. Thanks to Rafil at customer support chat for this.

Payment Wizard Does not create the File

Hi I am trying to run the payment wizard and in the final step it says it ran successful and create the outgoing payments but it does not create the payment file for the bank.
Step 1
            Start a new Payment run
Step 2
           payment type : out going
           payment method : bank transfer
           File Path : Go to Desktop and file name is test
Step3
          Select the business partner
Step 4
         Select the date range
Step 5
        Select the payment method
Step 6
        Select the Invoices
Step 7
        Execute
It says successfully Executed the payment and create outgoing payment for the business partner.
But it does not create the payment file (test in the Desktop)
Please help me!!!
Thanks
Sanjaya

Hi Sanjaya,
Check the link
Payment Wizard
Payment Wizard Run does not create Payment/Check
Payment Wizard/Engine - creation of Bank File
*Close the thread if issue solved.
Regards
Jambulingam.P

MS Outlook 2010 Add in Create pdf - does not create pdf of draft emails- Adobe Acrobat Pro X

In MS Outlook 2010 Add in Create pdf- does not create pdf of draft emails- this maybe the case, but just wanted to make sure this is normal for the program- though I guess one can print as an Adobe pdf but it does not maintain the hyperlinks of email addresses etc. the functionality is compromised in a print vs create a pdf.

Here's a workaround by the team:
Right click on the message from Explorer list view or folder view and chose the option to convert to PDF.

SQLJ Translation does not create profile file

SQLJ Translation does not create profile file.
After translating a small file HelloWorld.sqlj
the following files are created:
HelloWorld_SJProfileKeys.class
HelloWorld.class
HelloWorld.java
Although there is a HelloWorld_SJProfileKeys.class, profile file HelloWorld_SJProfile0.ser has NOT been created.
The starting file .sqlj file HelloWorld.sqlj is taken from O'Reilly book 'Java Programming with Oracle SQLJ' by Jason Price. The file contains a valid SQL statement to display the date.
My environment variables were set up with instructions from:
http://www.onjava.com/pub/a/onjava/2001/12/05/learning_sqlj.html
When I run java HelloWorld to run the .java file, I get the error:
SQLException java.sql.SQLException: profile HelloWorld_SJProfile0 not found: java.lang.ClassNotFoundException: HelloWorld_SJProfile0
I searched the internet high and low for a similar error to mine but I could not find a match.
I read the following text from http://otn.oracle.com/tech/java/sqlj_jdbc/htdocs/faq.html#translationerrors
but it does not help me.
"ClassNotFoundException: xxx.yyy_SJProfile0 for class xxx.yyy_SJProfileKeys
If you see an exception such as:
java.sql.SQLException: profile xxx.yyy_SJProfile0 not found:
java.lang.ClassNotFoundException:
xxx.yyy_SJProfile0 for class xxx.yy_SJProfileKeys
then you must ensure that the SQLJ profile(s), such as xxx/yyy_SJProfile0.ser, is available in the SQLJ runtime environment. This includes JARing this file as part of an applet deployment, or publishing it to the server via loadjava.
Any ideas? Thanks in advance,
John
Helloworld.sqlj before translation:
The program HelloWorld.sqlj illustrates how to connect to a
database, and display the words "Hello World" along with
the current date.
// import required packages
import java.sql.Date;
import java.sql.SQLException;
import oracle.sqlj.runtime.Oracle;
public class HelloWorld {
public static void main(String [] args) {
java.sql.Date current_date;
try {
// connect to the database
Oracle.connect(
"jdbc:oracle:thin:@localhost:1521:orac",
"scott",
"tiger"
// get the current date from the database
#sql { SELECT sysdate INTO :current_date FROM dual };
// display message
System.out.println("Hello World! The current date is " +
current_date);
} catch ( SQLException e ) {
System.err.println("SQLException " + e);
} finally {
try {
// disconnect from the database
Oracle.close();
} catch ( SQLException e ) {
System.err.println("SQLException " + e);
} // end of main()
HelloWorld.java after translation:
/*@lineinfo:filename=HelloWorld*//*@lineinfo:user-code*//*@lineinfo:1^1*//*
The program HelloWorld.sqlj illustrates how to connect to a
database, and display the words "Hello World" along with
the current date.
// import required packages
import java.sql.Date;
import java.sql.SQLException;
import oracle.sqlj.runtime.Oracle;
public class HelloWorld {
public static void main(String [] args) {
java.sql.Date current_date;
try {
// connect to the database
Oracle.connect(
"jdbc:oracle:thin:@localhost:1521:orcl",
"scott",
"tiger"
// get the current date from the database
/*@lineinfo:generated-code*//*@lineinfo:28^7*/
// #sql { SELECT sysdate FROM dual };
sqlj.runtime.profile.RTResultSet __sJT_rtRs;
sqlj.runtime.ConnectionContext __sJT_connCtx = sqlj.runtime.ref.DefaultContext.getDefaultContext();
if (__sJT_connCtx == null) sqlj.runtime.error.RuntimeRefErrors.raise_NULL_CONN_CTX();
sqlj.runtime.ExecutionContext __sJT_execCtx = __sJT_connCtx.getExecutionContext();
if (__sJT_execCtx == null) sqlj.runtime.error.RuntimeRefErrors.raise_NULL_EXEC_CTX();
synchronized (__sJT_execCtx) {
sqlj.runtime.profile.RTStatement __sJT_stmt = __sJT_execCtx.registerStatement(__sJT_connCtx, HelloWorld_SJProfileKeys.getKey(0), 0);
try
sqlj.runtime.profile.RTResultSet __sJT_result = __sJT_execCtx.executeQuery();
__sJT_rtRs = __sJT_result;
finally
__sJT_execCtx.releaseStatement();
try
sqlj.runtime.ref.ResultSetIterImpl.checkColumns(__sJT_rtRs, 1);
if (!__sJT_rtRs.next())
sqlj.runtime.error.RuntimeRefErrors.raise_NO_ROW_SELECT_INTO();
current_date = __sJT_rtRs.getDate(1);
if (__sJT_rtRs.next())
sqlj.runtime.error.RuntimeRefErrors.raise_MULTI_ROW_SELECT_INTO();
finally
__sJT_rtRs.close();
/*@lineinfo:user-code*//*@lineinfo:28^58*/
// display message
System.out.println("Hello World! The current date is " +
current_date);
} catch ( SQLException e ) {
System.err.println("SQLException " + e);
} finally {
try {
// disconnect from the database
Oracle.close();
} catch ( SQLException e ) {
System.err.println("SQLException " + e);
} // end of main()
}/*@lineinfo:generated-code*/class HelloWorld_SJProfileKeys
private static HelloWorld_SJProfileKeys inst = null;
public static java.lang.Object getKey(int keyNum)
throws java.sql.SQLException
if (inst == null)
inst = new HelloWorld_SJProfileKeys();
return inst.keys[keyNum];
private final sqlj.runtime.profile.Loader loader = sqlj.runtime.RuntimeContext.getRuntime().getLoaderForClass(getClass());
private java.lang.Object[] keys;
private HelloWorld_SJProfileKeys()
throws java.sql.SQLException
keys = new java.lang.Object[1];
keys[0] = sqlj.runtime.ref.DefaultContext.getProfileKey(loader, "HelloWorld_SJProfile0");
}

SQLJ Translation does not create profile file.
After translating a small file HelloWorld.sqlj
the following files are created:
HelloWorld_SJProfileKeys.class
HelloWorld.class
HelloWorld.java
Although there is a HelloWorld_SJProfileKeys.class, profile file HelloWorld_SJProfile0.ser has NOT been created.
The starting file .sqlj file HelloWorld.sqlj is taken from O'Reilly book 'Java Programming with Oracle SQLJ' by Jason Price. The file contains a valid SQL statement to display the date.
My environment variables were set up with instructions from:
http://www.onjava.com/pub/a/onjava/2001/12/05/learning_sqlj.html
When I run java HelloWorld to run the .java file, I get the error:
SQLException java.sql.SQLException: profile HelloWorld_SJProfile0 not found: java.lang.ClassNotFoundException: HelloWorld_SJProfile0
I searched the internet high and low for a similar error to mine but I could not find a match.
I read the following text from http://otn.oracle.com/tech/java/sqlj_jdbc/htdocs/faq.html#translationerrors
but it does not help me.
"ClassNotFoundException: xxx.yyy_SJProfile0 for class xxx.yyy_SJProfileKeys
If you see an exception such as:
java.sql.SQLException: profile xxx.yyy_SJProfile0 not found:
java.lang.ClassNotFoundException:
xxx.yyy_SJProfile0 for class xxx.yy_SJProfileKeys
then you must ensure that the SQLJ profile(s), such as xxx/yyy_SJProfile0.ser, is available in the SQLJ runtime environment. This includes JARing this file as part of an applet deployment, or publishing it to the server via loadjava.
Any ideas? Thanks in advance,
John
Helloworld.sqlj before translation:
The program HelloWorld.sqlj illustrates how to connect to a
database, and display the words "Hello World" along with
the current date.
// import required packages
import java.sql.Date;
import java.sql.SQLException;
import oracle.sqlj.runtime.Oracle;
public class HelloWorld {
public static void main(String [] args) {
java.sql.Date current_date;
try {
// connect to the database
Oracle.connect(
"jdbc:oracle:thin:@localhost:1521:orac",
"scott",
"tiger"
// get the current date from the database
#sql { SELECT sysdate INTO :current_date FROM dual };
// display message
System.out.println("Hello World! The current date is " +
current_date);
} catch ( SQLException e ) {
System.err.println("SQLException " + e);
} finally {
try {
// disconnect from the database
Oracle.close();
} catch ( SQLException e ) {
System.err.println("SQLException " + e);
} // end of main()
HelloWorld.java after translation:
/*@lineinfo:filename=HelloWorld*//*@lineinfo:user-code*//*@lineinfo:1^1*//*
The program HelloWorld.sqlj illustrates how to connect to a
database, and display the words "Hello World" along with
the current date.
// import required packages
import java.sql.Date;
import java.sql.SQLException;
import oracle.sqlj.runtime.Oracle;
public class HelloWorld {
public static void main(String [] args) {
java.sql.Date current_date;
try {
// connect to the database
Oracle.connect(
"jdbc:oracle:thin:@localhost:1521:orcl",
"scott",
"tiger"
// get the current date from the database
/*@lineinfo:generated-code*//*@lineinfo:28^7*/
// #sql { SELECT sysdate FROM dual };
sqlj.runtime.profile.RTResultSet __sJT_rtRs;
sqlj.runtime.ConnectionContext __sJT_connCtx = sqlj.runtime.ref.DefaultContext.getDefaultContext();
if (__sJT_connCtx == null) sqlj.runtime.error.RuntimeRefErrors.raise_NULL_CONN_CTX();
sqlj.runtime.ExecutionContext __sJT_execCtx = __sJT_connCtx.getExecutionContext();
if (__sJT_execCtx == null) sqlj.runtime.error.RuntimeRefErrors.raise_NULL_EXEC_CTX();
synchronized (__sJT_execCtx) {
sqlj.runtime.profile.RTStatement __sJT_stmt = __sJT_execCtx.registerStatement(__sJT_connCtx, HelloWorld_SJProfileKeys.getKey(0), 0);
try
sqlj.runtime.profile.RTResultSet __sJT_result = __sJT_execCtx.executeQuery();
__sJT_rtRs = __sJT_result;
finally
__sJT_execCtx.releaseStatement();
try
sqlj.runtime.ref.ResultSetIterImpl.checkColumns(__sJT_rtRs, 1);
if (!__sJT_rtRs.next())
sqlj.runtime.error.RuntimeRefErrors.raise_NO_ROW_SELECT_INTO();
current_date = __sJT_rtRs.getDate(1);
if (__sJT_rtRs.next())
sqlj.runtime.error.RuntimeRefErrors.raise_MULTI_ROW_SELECT_INTO();
finally
__sJT_rtRs.close();
/*@lineinfo:user-code*//*@lineinfo:28^58*/
// display message
System.out.println("Hello World! The current date is " +
current_date);
} catch ( SQLException e ) {
System.err.println("SQLException " + e);
} finally {
try {
// disconnect from the database
Oracle.close();
} catch ( SQLException e ) {
System.err.println("SQLException " + e);
} // end of main()
}/*@lineinfo:generated-code*/class HelloWorld_SJProfileKeys
private static HelloWorld_SJProfileKeys inst = null;
public static java.lang.Object getKey(int keyNum)
throws java.sql.SQLException
if (inst == null)
inst = new HelloWorld_SJProfileKeys();
return inst.keys[keyNum];
private final sqlj.runtime.profile.Loader loader = sqlj.runtime.RuntimeContext.getRuntime().getLoaderForClass(getClass());
private java.lang.Object[] keys;
private HelloWorld_SJProfileKeys()
throws java.sql.SQLException
keys = new java.lang.Object[1];
keys[0] = sqlj.runtime.ref.DefaultContext.getProfileKey(loader, "HelloWorld_SJProfile0");
}

Need to create a sales order that does not create demand

Hi,
We need to create a no cost sales order - that does not create demand
In our current set-up when we try to create a no cost sales order with a material ( It Cat = Norm) we see demand being created in MD04
What configuration settings will allow us a deliverable order - that does not create demand (no MRP run?)
Thanks,
SM

Hello,
For this set of requirement i think the best option would be to configure a New Sales Order Type and a new Schedule Line Category. In VOV6, While you are defining a new Schedule line category in the transaction flow make sure to switch off the three check box.
Transfer of requirements / Begin assembly order from SD
Availability check for sales
Product allocation active
Then when we are assigning this newly defined Schedule line Category to Item category, make sure to leave the field of MRP Type as blank in VOV5.
Regards,
Sarthak

Server does not create ois ?

Hi folks !
At first I wanted to send some Strings via the Client to the Server and print them onto the screen. On a specific String "antwort" I would like to send an Object k from the Server to the Client and prove on the Client the correctness of the object by reading the attribute set on the serverside before sending.
But somehow the server does not create the ObjectInputStreams and I don�t know why.
That�s the code:
// Server:
public class Server {
public Server() {
try{
String input = new String();
ServerSocket sock = new ServerSocket(16348);
Socket socket = sock.accept();
System.out.println("socket"); // this line is printed on connection
ObjectInputStream sockin = new ObjectInputStream(socket.getInputStream());
System.out.println("objectinputstream"); // but this one never appears
ObjectOutputStream sockout = new ObjectOutputStream(socket.getOutputStream());
Kunde k = new Kunde();
k.setNummer(13);
while(!input.equals("Ende")){
input = sockin.readObject().toString();
if(input.equals("antwort")){
sockout.writeObject(k);
sockout.flush();
sockout.reset();
System.out.println(input);
socket.close();
catch(Exception e){
public static void main(String[] args) {
// TODO code application logic here
new Server();
// The Client
public class Client {
public Client() {
try{
Socket sock = new Socket("localhost",16348);
// System.out.println(sock.isOutputShutdown());
sock.setSoTimeout(5000);
System.out.println("socket hergestellt");
ObjectInputStream sockin = new ObjectInputStream(sock.getInputStream());
System.out.println("sockin");
ObjectOutputStream sockout = new ObjectOutputStream(sock.getOutputStream());
System.out.println("sockout");
String eing = "";
System.out.println("vor while");
while(!eing.equals("close")){
eing = erwarteEingabe();
System.out.println("Sende:"+eing);
if(eing.equals("antwort")){
sockout.writeObject(eing);
Kunde k = (Kunde)sockin.readObject();
System.out.println("Nummer des Kunden: "+k.getNr());
else{
sockout.writeObject(eing);
sockout.flush();
sockout.reset();
catch(Exception e){
System.out.println(e);
public static void main(String[] args) {
// TODO code application logic here
new Client();
private String erwarteEingabe(){
String eing = "";
System.out.println("nehme Eing entgegen");
try{
BufferedReader b = new BufferedReader(new InputStreamReader(System.in));
return b.readLine();
catch(Exception e){
System.out.println(e);
return "";
}

When you create an ObjectInputStream it tries to read the object stream header from the underlaying stream. In this case both your server and client are waiting for the other one to send the header before they can continue. This problem can be avoided by simply creating the object output streams first:ObjectOutputStream sockout = new ObjectOutputStream(socket.getOutputStream());
ObjectInputStream sockin = new ObjectInputStream(socket.getInputStream());

Transport Screen objects-GUI status(SAP does not create request, why)?

Hi experts,
I use SE80 to change GUI status, but system does not create a transport request for me to transfer? why?

Hi,
Thanks for replay. Actually, the SE80->program->Gui status have some objects and they are already transfered. But I can't see them on target system. But When I create exactly the same name, the system tell me they are already created. I think it becuase the original language is 'DE' but I use default language 'EN' to modify and create the request?

LogiTech QuickCam webcam does not create /dev/video0

Similar Messages

Maybe you are looking for