Logitech s530 keyboard lost inputs / no or slow responding

the wireless keyboard is now crazy:
1. if i keep typing, it'll miss some characters !!
2. Someimes the key just responding,for example: backspace, entr, it just will not perform accordingly
3. They Number Pad is even worse, i can only type "1", and i can type "2" after 5 seconds wait;
4. Sometimes it just go back to normal, sometimes it doesnt.
brandnew macbook, no extral software installed.
i've got the problem before install the logitech driver, and after install LCC 2.0 the problem still exist.
please help.

If you have access to another Mac I would try it there to see if there's a difference. You might just have a faulty keyboard/receiver.

Similar Messages

Logitech S530: Broke my MacBook Pro

I hooked up my new Logitech S530 today. Then I used the install CD to load the drivers. Only some functionality for the keyboard and mouse. So I went to the Logitech site and downloaded LCC212.dmg. It went though it's install and when finished, I told it to restart. Now my MacBook will not boot.
Now what? Suggestions as to what I might try to get my computer working again would be appreciated.
Regards,
John
MacBook Pro Mac OS X (10.4.8) Logitech S530 desktop
MacBook Pro Mac OS X (10.4.8)

Do you try to start your MacBook without S530 keyboard/mouse connected ?
By the way, you should not use new version 2.1.2 of LCC. It appears to don't work at all for a lot of people (maybe everyone).
Try older version 2.1.1 : ftp://ftp.logitech.com/pub/techsupport/mouse/mac/lcc211.dmg
And as LCC use and install Unsanity Application Enhancer (APE) and last version 2.1.2 install a new version of APE which seems to have a bug with Rosetta and slow down Intel based Mac.
You should manually uninstall APE after uninstalling version LCC 2.1.2 and before install version 2.1.1.

Bluetooth lag with Logitech Tablet keyboard

Hi there,
just got the Xperia Tablet S 64 GB and am running Android 4.1.1.
I'm trying to use the Logitech Tablet keyboard with the tablet but the lag between typing letters and having the letters appear is unbearable. That is, if I touch type a sentence, I have to wait several seconds for the tablet to slowly print it out on the screen letter by letter, much slower than I typed.
I'm sure the problem is not the keyboard because it works fine on another device.
Does the Xperia just have a slow bluetooth version or is there something I can do?
Thanks for any help.

Could you try disable wifi and then check if it still lagging ?
Might be bluetooth wifi interfearance thats still little bit bugged.
If reported this with bluetooth headset using 2.4g kills bluetooth headset, while on 5G headset kills 5G wifi.
This looks fixed so far, tough wifi speed is slower for example when their also bluetooth activity
That might be reason its also lagging because its not optimised properly yet.

Logitech Ultrathin Keyboard Cover for my iPad Air

Hi all: 3 day ago I bought one Logitech Ultrathin Keyboard Cover for my iPad Air in black; but I don't like the combination with my white IPad Air and I lost the receipt. If somebody has a white one and want to interchange it please let me know. Thanks!

The Air 2 is slightly thinner, bit is essentially the same size as the Air, so while it may be ever so slightly loose it should still work just fine.

Does anyone know if the logitech tablet keyboard (standalone) works with the iPad air? Can't find the answer on the logitech website

Does anyone know if the logitech tablet keyboard (standalone) works with the iPad air? Can't find the answer on the logitech website

I found this answer on Logitech's website:
http://forums.logitech.com/t5/Keyboards-and-Keyboard-Mice/Ipad-air-keyboard/m-p/ 1116125#M39741

Will the Logitech Tablet Keyboard for Android 3.0+ work with the Playbook 2.0 OS?

Thinking of buying the Logitech Tablet Keyboard for Android 3.0+ for my Playbook but before I do I want to make sure it'll work with my Playbook with the new 2.0. Can anyone help?

Hi Patrick,
short storry: you can not setup Sun VDI 3 that way.
Long story: Sun VDI 3 takes advantage of the VBox webservice to register, startup, poweroff, etc. VMs. The configuration and startup of the webservice is handled via a VBox installation script/installer that is bundled with Sun VDI 3 (and this installer is available for Solaris 10 only). Furthermore, we require a specific VBox version, because the VBox API has changed incompatible between 2.0.x, 2.1.x, 2.2.x, etc. - Sun VDI 3 currently supports 2.0.8. Thus any VBox VMs created with 2.1 or 2.2 will not run in a Sun VDI 3 environment.
The typical Sun VDI 3 setup requires that the core and VBox parts are installed on a Solaris 10 machine (either both on the same machine or separate ones). For both the core and the vbox parts we provide a corresponding installer available via the Sun VDI 3 download page. Furthermore, you also need another machine for the ZFS/iSCSI storage part (e.g. running OpenSolaris). Please refer to the Sun VDI 3 documentation for all the details and background.
You can still install VBox also on a laptop with your preferred OS and use this setup for example for preparing your VMs that should later be imported and executed in a Sun VDI 3 environment. However, as stated this requires the VBox 2.0.8 version (there is a link on the Sun VDI 3 download page pointing to the compatible VBox versions for other OS).
- Klaus

Does the ios7work with Logitech wireless keyboard? It worked until upgraded

Does IOS7 work with the Logitech wireless keyboard. After installing IOS 7 it is not working now

I assume your wireless KB is third-party (as Apple does not make a BT KB with numeric keys). I suggest you contact the manufacturer for guidance.
Barry

Logitech Multimedia Keyboard (key not working)

I got a new Logitech Multimedia Keyboard and using xbindkeys I got almost all the keys mapped.
There is one key, however, (the Messenger key) that does not seem to be recognized at all.
It does not show when I use "xbindkeys -k", nor when I use "xev" and there is no "action" whatsoever when I press this key. Yet, being the key there I should be able to map it.
Does anyone have any ideas as to how could I find out and/or map this key?
In all honesty, it is not just about the key ... I can just as well use key-combinations and get Gaim going, but I want to know why it is "invisible". I other words, I want to understand the problem.
Thanks in advance.
R

Copied from gentoo-wiki (and edited for Arch):
If pressing a key doesn't do anything at all (ie, xev produeces no output), run the following command in an X terminal:
dmesg
You will probably see some lines like these:
Code: Output of dmesg
atkbd.c: Unknown key released (translated set 2, code 0x96 on isa0060/serio0).
atkbd.c: Use 'setkeycodes e016 <keycode>' to make it known.
This means that the kernel doesn't have keycodes mapped to your keyboard's scancodes. You will have to add one line in /etc/rc.local for each missing key as follows:
File: /etc/rc.local
setkeycodes e008 136
setkeycodes e016 150
... And so on ...
Where the first number (e008) is what you see in dmesg, and the second number (136) is an unused keycode in your kernel. In general you can find a good keycode by taking the last 2 digits of this first number, converting it from hex (base-16) to decimal (base-10) and adding 128.
This will set up the proper scancode - keycode mapping every boot. To set them up without rebooting, run the following as root:
sh /etc/rc.local
After you have the proper mappings setup, restart X and try running xev again, to ensure that a keycode is displayed for each multimedia key you want to use.

How can I fix my keyboard if it is slow responding?

The keyboard on my iPhone has stopped responding. It is VERY slow when I try to type anything. I have turned off data on my iCloud settings, reset my settings, and even restored my phone (wiped it clean) but still no resolution. Please help. Need a fix.

Try holding the 'lock' and 'home' buttons at the same time for about 10 seconds until you see the Apple logo, but from what you said I don't think that will help. If it doesn't, your only course of action is to take it to the Apple store and hope that it's under warranty.
If not, you can always go to Amazon and buy a new screen and digitizer and try to replace it yourself. Nothing to lose (:

Wireless keyboard lost command and 0 - keys funktion

Hi all,
after quite some time of working with no problems at all my wireless keyboard lost the command - keys and the zero. There is no reaktion when I touch them. After a restart they work for some minutes and then they are gone again. What can that be. Working on a MacBookPro with 1.6.8.
Thanks in advance for any tips and hints. I don´t think it is something with the keyboard hardware-wise because both command keys got lost simultaniously.
Best regards - Christoph

Hello:
I tmight be that the KB failed...
However, try resetting the PRAM - it might help and cannot hurt.
Barry

Ipad2 with ios 7.1.2 no longer syncs with logitech ultrathin keyboard.. Any ideas?

ipad2 with ios 7.1.2 no longer syncs with logitech ultrathin keyboard.. Any ideas?

Try a reset of the iPad (hold the home and power keys down until the Apple logo appears (15-20 sec)).
Barry

HT4111 I have an IPAD updated with iSO 7. Recently I purchased a logitech wireless keyboard and I went to pair the two up and the IPAD shows that the keyboard is paired or connected but when I type using the keyboard it does not transfer to the pad scene.

I have an IPAD updated with iSo 7. Recently I purchased a logitech wireless keyboard.
I went to pair the two up and the IPAD recognizes the keyboard and cites that it is connected.
But I proceed to type the words do not transfer to the screen.
Any suggestions? Techs at Best Buy state that the iSO 7 is not yet compatible with the keyboard manufacturers?
How long before they are?

The BestBuy guys are clueless. I use a Logitech BT Tablet keyboard with my iPad 4 - used it before with iOS 6 and use it now with iOS 7 and it works just fine.
A simply thing to try is to remove the BT pairing, reset your iPad (hold the on/off/sleep button and the home button at the same time until the Apple boot logo appears), then try repairing them. You may have to force the keyboard back into pairing mode (on mine, there is a button on the underside, near the on/off switch, that I would press and hold for second or two to force pairing mode).

Logitech k400 keyboard - there is not a key to the left or right of shift

i got the logitech k400 keyboard to use with my macbook air and an external monitor. it's a little wireless keyboard with a built in trackpad.
when i got it, it worked great right away. i plugged in the the usb receiver and it worked just fine.
i took it to work where i also have a logitech keyboard but not one with a trackpad like the k400. the logitech unifying reciever says it will work with any logitech device that has that symbol on it. so it worked fine there too.
when i got back, the macbook air no longer recognizes the logitech keyboard. i've tried new batteries, all sorts of variations on restarting the laptop, taking batteries out and in, removing/replacing usb receiver.
when i try to go to system prefs for the macbook air and set up the keyboard, it wants me to press the key to the right of the shift key. well, on this keyboard, this not a key to the right of the shift key.
there is no software at the logitch site and their forums haven't yielded any results.
i don't understand why it worked and now it doesn't. i used it at home for two days before taking it to work so i know that it definitely was functioning as expected with the macbook air.
i'm not sure if it's a mac problem or logitech problem and i'm not sure how to figure that out.
any help would be appreciated.
thanks!

you would press the z key which is right of the left shift key and the / key which is (left of)beside the up arrow key, this worked for me!Basically you skip over the up arrow key.

MAGIC MOUSE & WIRELESS KEYBOARD - LOST CONNECTION

Hi guys,
I get confused why the mouse and the wireless keyboard lost it's connection from time to time. I cannot explain it and I don't know what to do except wait for it to reconnect. It's kinda annoying. Is this an issue with the software or something?
many thanks

This disconnection problem seems to be a major problem with anything Apple! I have had this problem for months now, as have others and have tried everything that has been suggested in this Forum, all to no avail.
On the assumption that may be, just may be, someone from Apple will read the myriad of problems associated with the constant disconnection of wireless products produced by/for them, they will get it sorted. But it has been going on for years it seems to me, and still there is no tangible work around or permanent fix.
I am reaching the stage where I will be throwing my MM out the window soon along with any of the other wireless connected items I have. (Keyboard, Number Pad, MM and Track Pad.) There just does not seem to be any answer that works permanently. Never ever had this problem when I used the Windows system and am getting a wee bit miffed that I changed from Windows to Apple. The most unreliable piece of kit ever to come out of a Computer Shop!!
altv

Apple Wireless Keyboard lost connection when "command+space" is pressed

Hi, my apple wireless keyboard lost connection when command and space key was pressed. it does not lost connection when other keys combination was pressed. Are there any people has the same problem with me?
I am using Emacs all the time, the command and space key is the default short cut for Mark in Emacs. It is constantly used in my daily work. The wireless keyboard does not lost connection always, but it does lost connection sometimes. I have observed every time it lost connection, the command + space was pressed. Really strange. Any advice?
I am using Macbook Pro 13inch Late 2012, OSX 10.9.1, and Apple Wireless Keyboard

Got the keyboard working again, here how incase it can help anyone else:
I borrowed a USB keyboard to allow me to get past the pasword login.
First I rang disk utitlity to repair any permissions. I opended up the app 'Bluetooth Setup Assistant' selected 'Keyboard' then I turned the keyboard 'on' so the green light is flashing' and then hit continue. At this point the keyboard appears in the listing of found items, hitting continue I am then given a unique pairing code. Enter this on the keyboard and hit 'Return' after a few seconds, the pairing is complete and by wireless keyboard is back and working again!

Logitech s530 keyboard lost inputs / no or slow responding

Similar Messages

Maybe you are looking for