Logitech security cameras are dropped constantly

Logitech security cameras are dropped constantly. am I just imagining this or did this start to happen when Comcast came out with its own security cameras? I reset my Logitech camera to work through the Comcast router about once ever

Well it sounds like they are wireless, are they?
if they are take a laptop and load the in home agent, and go to one of the locations where you have the most trouble, and run the wifi wizard from that location.
it will find if you have interference and automatically make an adjustment for you, then you can watch and retest it.
get the in home agent at www.verizon.com/connect

Similar Messages

  • I just recently got a new iPhone 4 and the service is all of a sudden terrible and my calls are dropped constantly. This has never happened before. Any suggestions on what I can do? This is really frustrating!

    i just recently got a new iPhone 4 (my other one had water damage) and the service is all of a sudden terrible and my calls are dropped constantly. This has never happened before. Any suggestions on what I can do? This is really frustrating!

    May be your carrier but try a reset:
    Hold the Sleep/Wake and Home buttons until the screen goes dark and the Apple logo appears

  • I am trying to open some *.avi files in quicktime, they are from my security camera at home.  It will not open them, would anyone be able to help me?  It says I need a plugin but it does not tell me which one.

    I am trying to open some *.avi files in quicktime, they are from my security camera at home.  It will not open them, would anyone be able to help me?  It says I need a plugin but it does not tell me which one.

    I am trying to open some *.avi files in quicktime, they are from my security camera at home.  It will not open them, would anyone be able to help me?  It says I need a plugin but it does not tell me which one.
    Basically your player is telling you that you need to install the codecs that will play the compressed data within the AVI file.
    AVI is a legacy file container in which the tracks of data are interleaved to maintain synchronization. This data can be encoded using many different audio and video codecs. Your problem is to determine which codecs you need for the player you are trying to use and install them if they are available. Failing that, your will either have to play the files in a different player which has the codec support your require built into the app or convert the content to a compression format that is natively compatible with the player you wish to use.
    Since you have not stated what platform, operating system, and particular player you are targeting for playback, it is difficult to provide precise instructions for fixing your specific problem at this point. Suggest you try alternative players compatible with your system and platform to see if they will play the files, use a dedicated media information utility to determine the codecs needed for playback, or post a sample file for analysis.

  • Security camera for area with no power

    Thats going to be a tough one (really).
    You can use solar power and a wireless bridge in the camera to connect back to your storage device or use a SD card in the camera to store the video, but then you will need to swap the SD card to retrieve the video. So you can get solar powered cameras. The issue is lighting the area after dark. If you want overt security you will have to put up lighting in the area. If you want covert security you will need to get a camera that is sensitive to IR light then flood the area with IR light, which also takes power. It would be easier to pull off if you could get AC mains in that area first then work on the right camera and lighting for the area.

    We have a lot that we store cars on sometimes that has no lights and no power. Recently we've had some vandalism and we'd like to get some security cameras on that area. Any suggestions?
    Thanks!
    This topic first appeared in the Spiceworks Community

  • Are there any apple compatable security cams

    Are there any apple compatable security cams available

    Check out EZJim’s website “iSight as a surveillance or Nanny cam” which can be found HERE.  <----- CLICKY CLICK

  • How can I view and convert .264 files from my security cameras for use on my Mac and the web?

    My security cams record in a .264 file format HD.  I want to view, edit, etc on my Mac, what software will do that and are there any easy tips to do this?  I'm new to Mac's so I'm not sure what is the best format to convert to?  mp4?  Suggestions?
    Thanks in advance.  I do love the Mac so far.

    I have downloaded the trail....and it won't recognize my .264 files....not sure what the deal is?  Here is a screen shot-they files are "grayed" out....and won't highlight.  Do you see anything wrong?  I'm pulling the files off of a Lorex DVR security system.  LHD200

  • Port Forwarding for Security Cameras

    I have a Cisco RV220W that I am trying to set up to view the store security cameras remotely. I can view the cameras when connected to the LAN but not with a WAN connection. The Video recorder is an ADT system. 
    Always Allow
    RTSP:TCP
    Enabled
    Any
    192.168.0.24
    8016
    Always Allow
    RTSP:UDP
    Enabled
    Any
    192.168.0.24
    8016
    The port is the viewing port for the DVR. Any help would be appreciated. Thanks

    Hello,
    I have looked into the RTSP standard, and it looks like the default ports are 554 for TCP and UDP.  Since it looks like your cameras are using a different port, you may want to try creating a custom service for 8016 externally, since the default rule is currently translating 554 to 8016.  Of course you can also try connecting to the cameras with the public IP and port number 554, that should work with your current setup.
    However if you are unable to change the port your client software uses, definitely try creating a custom service for 8016.  You may also want to double check that the camera has the RV set as it's default gateway.
    Hope that helps,
    Christopher Ebert - Advanced Network Support Engineer
    Cisco Small Business Support Center
    *please rate helpful posts*

  • What changed in Firefox versions 15,16 & 17 while viewing network security cameras?

    I have been viewing my network Axis security camera's over my local area network for years with Firefox. After update version 15, I can only view the image for a few seconds before I have to reload the page because the image will disappear. The camera's server stays up, but the video image is gone, and telling me to reload page. After a reload it comes back in. Sometimes it will only last 5 sec's, other times between 30 & 60 sec's. If I downgrade to version 14.0.1, it all works fine like it should again. Am I doomed to use this version now forever? Or is there a way to tweak the newer version to let me view the video image longer?
    Camera's video image is in Motion JPEG format and I have the latest Java & flash installed. I also have tried Firefox with all plugins disabled and it still don't help. I have 64 bit Windows 7 for operating system.

    Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
    *Do not click the Reset button on the Safe mode start window or otherwise make changes.
    *https://support.mozilla.org/kb/Safe+Mode
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

  • Wifi drops constantly on WPA enterprise wifi on my campus

    Hello,
    I own a macbook pro retina mid 2012 on maverick. The wifi drops constantly on campus, it's a WPA enterprise wifi. The wifi seems to work fine at home. My computer has been sent to an apple store twice for this issue already, I got it back but it is still not working and i spent more than 3 hours on the phone with apple trying to solve that issue. They made me run a lot of stuff, got me to send them files so that their engineers could work on them.
    Bottom of the story, they tell me that the problem must come from my university wifi, a wifi network used by 50 000 students every single day and everyone is fine with it ...
    I have been to the computer help desk on campus and they had no idea what to do.
    So please if anyone has any hint, i would greatly appreciate as I lost faith in apple "engineers" and their skills.
    Thanks guys.

    Hi  ,
    Thank you for visiting the HP Forums! A great place where you can find solutions for your issues with help from the community!
    I came across your post about the Notebook, and wanted to assist you! I have looked into your issue about your HP ENVY 15-k233ca Notebook and issues with the WiFi dropping constantly. Try this fix.
    Go to device manager,the Network adapters WiFi driver properties power management
    Allow this computer to turn off wifi to save power, uncheck it and restart the Notebook. Hope this helps. Thanks.

  • Wifi dropping constantly on a MacBook Air and iPad 2 and iPad 3.  I am not computer savvy so any solution will have to be in 'normal' language, please.

    I keep looking for the solution to wifi dropping constantly, but just can't understand the answers, let alone follow the instructions.  Can anyone please explain in 'baby' language how to stop wifi constantly dropping on my MacBook Air and iPads 2 and 3.  I have had this problem for about three weeks and prior to that everything was fine.  I am using a D-Link Router on channel 11, with AOL as my provider.  Thank you so much.

    That is correct, so I have just been told!!  Our Router is a D-Link DSL-2640R which we access via typing 192.168.1.1 into our Internet Explorer Browser on a Windows PC computer.  All this has been working for years.  The Summary page for the Router shows Internet, DSL and Wireless are all connected and working fine.  We have changed the channel to 11 which has made things faster and is not in conflict with nearby systems, but wi-fi still drops on the Mac and iPads.  I have only had this problem for a matter of a few weeks.  Before that all worked perfectly fine. 
    By the way thank you very much for trying to help.

  • How to get video of more than one security camera in java

    I want to get video from more than one security cameras and i really donot know yet how we do this that get videos continously with more than one camera
    olz i a beginner help me

    Hello.
    I don't know if the topic still matters, but as I took advantage from the information in the preview posts, I decided to give my share.
    I successfully ran three webcameras at the same time in a Linux machine with JMF.
    The two main issues are:
    1. It is necessary to run the binary "jmfregistry" ($JMFHOME/bin/jmfregistry) to detect the cameras every time a new one is added to the system. (Remember to run the binary with a user with write privileges on the registry file ($JMFHOME/lig/jmf.properties)).
    2. It is mandatory to plug each camera in a different usb bus. In my case, the PC I was using had three accessible two-ports buses, two in the rear and one in the front of the box. If we try to use two cameras in the same bus, one of them won't work or the detecting procedure in the "jmfregistry" program will hang.
    I hope it helps. Any question, please feel free to ask.
    Andr� Braga
    My configuration:
    Java:
    Java(TM) SE Runtime Environment (build 1.6.0_01-b06)
    JMF-2.1.1e_linux_native
    The machine:
    OpenSuse Linux version 10.2 (kernel 2.6.18.2-34-default)
    running in a Celeron D processor 2.66 GHz
    Motherboard: Giga-byte GA-8IPE1000 Pro2 motherboard (865PE)
    The result of the "lsusb" command:
    Bus 004 Device 004: ID 0ac8:303b Z-Star Microelectronics Corp. ZC0303 WebCam
    Bus 004 Device 001: ID 0000:0000
    Bus 005 Device 001: ID 0000:0000
    Bus 001 Device 001: ID 0000:0000
    Bus 002 Device 023: ID 0c45:6007 Microdia
    Bus 002 Device 001: ID 0000:0000
    Bus 003 Device 004: ID 0ac8:301b Z-Star Microelectronics Corp. ZC0301 WebCam
    Bus 003 Device 001: ID 0000:0000
    In time (for linuxers): It was necessary to download and install the gspcav driver (http://mxhaard.free.fr/). It is also necessary do load this driver before the camera driver:
    modprobe gspca
    modprobe zc0301 (this one comes with the distribution)

  • Wireless security cam

    hi,
    I am planning to install several wireless security cams at home, and the one from linksys seemed  a good choice to me. 
    I am looking for a specific feature that I am not able to find any explanation on. In the features I see that I am abe to watch live immages remotely, and record those live images. What I am also looking for, is that the system can automatically takes and record immages, even when I am not connected to the cam.  assumethat there is a stranger in  our house, I wantthose images t be recorded at a later stage so that I can see who has been there. 
    Is that possible with the linksys cam?
    Many thanks in advance.
    Best regards,
    Koen

    Yes,using the motion detection feature on the linksys camera it is possible...Some good linksys camera are WVC54GC,WVC54GCA,WVC80N.

  • Wireless webcam / security cam for use with Intel iMac

    Hi all. I want to set up an outdoor web/security cam and a wireless model would be ideal, as I want to be able to put it in different locations.
    There seem to be many PC-compatible wireless cameras, but are there any which are compatible with the Mac OS? I don't really want to get into Boot Camp / Parallels territory if possible.

    Hi Robin
    Have a look at http://www.axis.com/products/cam_207w/
    Tony

  • Port forwarding security cameras WPA2 blocked?

    I just bought an Airport Extreme router and set up port forwarding for home security cameras.
    When I have no security - I can access the cameras remotely (iPhone) and locally with no problems on my iPhone. However, when I add on WPA2 security everything gets blocked. Is there a firewall or feature inside the AEBS that needs to be modified? Help!

    The fact that you can access the cameras remotely verifies that the port settings are correct on your AEBS.
    Wireless security does not use ports as it is a local network feature so no additional base station settings should be required.
    The issue appears to be with your iPhone Wi-Fi connection when wireless security is enabled. WPA2 is supported with all iPhone models.
    I would recommend at this point to change the security password to see if this resolves the problem. Temporarily try the following as the base station's Wireless Security password: 0123456789abcdef0123456789
    Note that there are exactly 26 characters. If this works, go ahead and change the password. I would recommend one that contains a combination of 26 letters, numbers, & punctuation marks without using any spaces.

  • Security Camera / DVR

    Trying to monitor my security camera on my dvr,…all mobile apps work fine but can't seem to get mac / SMS to connect with all the same settings,any other software for Mac for dvr monitoring,…running OSX Lion 10.7.5 ? Thanks Joe P.

    Airport 802.11n 3rd generation, 5.6.1
    Time Capsule version 7.6.4
    Just want to be sure. Do you have both a 3rd generation 802.11n AirPort Extreme base station and ? generation Time Capsule? ... or just a 3rd generation Time Capsule?
    If both how are they configured with each other? Regardless, what is the make & model of your Interent modem?
    What are the ports, both UDP & TCP, that Samsung says are required for their DVR in order to access it from the Internet?

Maybe you are looking for