Logo and authors on all slides

Hi guys,
how can I insert authors and logos on all slides?
What is the best practice?
Thanks to all!

No, there's no "master Master", no shortcut to changing masters this way.
But, to avoid misunderstanding: You only need to change the Masters of the slide types in the Theme you're actually using in the presentation (for instance: "Title & Subtitle", "Title & Bullets", "Photo - Horizontal"). You don't have to change all the Masters in your selected Theme. You mention "20 master slides": I haven't looked at all the Masters in all the Themes, but the Themes I've looked at closely usually have only about 15 Masters. And further: I suppose someone might want to make a presentation using all the Masters in their chosen Theme, but in my own experience that's never been desirable. I use just a selection of Masters, rarely more than about 5, if that. So, for me, I'd only have to put the logo on those 5 Masters.

Similar Messages

Macbook Pro wont start up (Apple logo and spinning thing all I get)

When I turn on my macbook pro I get the “tone” the Apple logo and the spinning thing but then the spinning thing just freezes up and does nothing for ever. I let it just site like that for 30 minutes then it just goes to black. It is plugged in so power is not an issue.
I tried to boot up in safe mode and again I get the tone the logo then the bar to show the safe mode then the spinning thing then nothing. I did boot it up via firewire target mode and was able to see the hard drive and all my files on my imac so the hard drive works (I think).
I do have the original install disk and am willing to start the computer fresh but have no idea how.
So any suggestions???
I also tried to turn on and run the repair mode I think that’s where I held down a key the screen went black and some commands ran then I typed somting like flvr - fv
Thanks Brad

Reinstalling Lion/Mountain Lion Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

Logos and Menus on all pages

I wish to stop using frames. How can I manage logos and menus
from a central point?

Server-side includes.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"kwame_za" <[email protected]> wrote in
message
news:g9h07t$gig$[email protected]..
>I wish to stop using frames. How can I manage logos and
menus from a
>central point?

I was trying to update IOS version on my iPad but now there is a ITunes logo and that's all, please help to know which are the steps to continue with the update

Please your help.

Try:
- iOS: Not responding or does not turn on
- If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.

Is there a way to create a text field that shows on all slides?

I'm trying to create a "Revised On" date field that can be shown on every slide. Or, do I just have to copy and paste on all slides?
Thanks in advance.
- Michael

use the master slides
view > show master slides
click on the master slide that has a tick mark
add a text box to master slide and any other objects that you want on every slide; enter text, then position, size and set colour
click on the normal slide and add other content that is to be seen on that slide only
adding new slides will use the background design

Floating logo and pages off centre?

Hi,
I am a novice Dreamweaver MX user developing an asp application using the bones of an old site I had built years ago. I have designed a new logo and changed out all the pages in the old site with the new logo. I have also built some new pages and connected with new links. My box runs windows XP professional and I am using a medium size LCD TV as my monitor. (51 eyes not good) Settings are 800x600. In the page property settings in Dreamweaver MX I found it necessary to set some of the pages to Left margin: 30 Margin width: 30 so that they would display in the centre of my browser.
On my computer set up the entire logo and pages look good in the browser and all are centered, all seemed well. I then went to the local library to see how they looked. I now have logo not centered in line with the rest of the document and some of my new page/pages are right on the left margin of the browser not centered as in my set up view.
I then changed my settings to a higher resolution and found the same result as the library.
How do I get my pages all centered with the logo all in the same place? If you would like to see this problem first hand http://www.debtorstocash.com
Cheers

hi,
try giving left and right margin : auto ;
to ur main div tag. not like 30*px and any value,,and u will see ur page wil be in center in all browser. and
have u used external css,,? if not, we have to reset all tags first b4 proceeding further work , in html
hope i was rite
best
whitsunday lad wrote:
Hi,
I am a novice Dreamweaver MX user developing an asp application using the bones of an old site I had built years ago. I have designed a new logo and changed out all the pages in the old site with the new logo. I have also built some new pages and connected with new links. My box runs windows XP professional and I am using a medium size LCD TV as my monitor. (51 eyes not good) Settings are 800x600. In the page property settings in Dreamweaver MX I found it necessary to set some of the pages to Left margin: 30 Margin width: 30 so that they would display in the centre of my browser.
On my computer set up the entire logo and pages look good in the browser and all are centered, all seemed well. I then went to the local library to see how they looked. I now have logo not centered in line with the rest of the document and some of my new page/pages are right on the left margin of the browser not centered as in my set up view.
I then changed my settings to a higher resolution and found the same result as the library.
How do I get my pages all centered with the logo all in the same place? If you would like to see this problem first hand http://www.debtorstocash.com
Cheers

While downloading an ITunes upgrade, my Ipad froze. All I see is the Itunes logo and a picture of a USB cable. Everything is frozen. Tried resetting by holding down the wake button but I get no slider button. IPad is frozen.

While downloading an ITunes upgrade, my IPad froze. All I see is the ITunes logo and pic of a USB cable on my screen. Tried to hold down the wake button while connecting the USB cable to override it but no results. Still frozen with ITunes logo. Any thoughts or suggestions?

Force your iPad into Recovery Mode
1. Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.
3.While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
4. Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears, release the Home button. iTunes should alert you that it has detected a device in recovery mode. Click OK, and then click Restore to restore the device.
Note: Data will be lost. You may have to repeat the above many times.

My phone doesn't want to turn off or on, it gives me the apple logo and doesn't turn on at all, help please??

my phone doesn't want to turn off or on, it gives me the apple logo and doesn't turn on at all, help please??

Do a reset by holding the power and home button until the apple logo appears ignoring the slide to power off (no data loss).

My ipod touch 4 gen is in recovery mode and i dont know how to get out of it,i tried everything like hold the home and top button at the same time. All it did what g to the apple logo and went back to recovery mode any help?

My ipod touch 4 gen is in recovery mode and i dont know how to get out of it,i tried everything like hold the home and top button at the same time. All it did what g to the apple logo and went back to recovery mode any help?

Once the Device is asking to be Restored with iTunes... it is too late to save anything... and you must continue with the Recovery...
kevinpowell1 wrote:
how can i get it out of recovery mode?
Make sure you have the Current Version of iTunes Installed on your computer
iTunes free download from www.itunes.com/download
Then See Here > http://support.apple.com/kb/HT1808
You may need to try this More than Once... Be sure to Follow ALL the Steps...
Take your time... Pay particular attention to Steps 3 and 4.
Some users have reported as many as 8 or 9 attempts were necessary before success.
After you have Recovered your Device...
Re-Sync your Content or Restore from the most recent Backup...
Restore from Backup > http://support.apple.com/kb/ht1766
If the issue persists...
Then a Visit to an Apple Store or AASP (Authorized Apple Service Provider) is the Next Step...
Be sure to make an appointment first...

I switch on my mac book pro and all i get is the apple logo and below a loading wheel , but its stuck there for like an hour !!! help??

i switch on my mac book pro and all i get is the apple logo and below a loading wheel , but its stuck there for like an hour !!! help??

Take each of these steps that you haven't already tried. Stop when the problem is resolved.
Step 1
The first step in dealing with a boot failure is to secure your data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since your last backup, you can skip this step.
There are several ways to back up a Mac that is unable to boot. You need an external hard drive to hold the backup data.
a. Boot into the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.”
b. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, boot the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
c. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
Step 2
If the startup process stops at a blank gray screen with no Apple logo or spinning "daisy wheel," then the startup volume may be full. If you had previously seen warnings of low disk space, this is almost certainly the case. The easiest way to deal with the problem is to boot from an external drive, or else to use either of the techniques in Steps 1b and 1c to mount the internal drive and delete some files. According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation.
Step 3
Sometimes a boot failure can be resolved by resetting the NVRAM.
Step 4
If you use a wireless keyboard, trackpad, or mouse, replace or recharge the batteries. The battery level shown in the Bluetooth menu item may not be accurate.
Step 5
If there's a built-in optical drive, a disc may be stuck in it. Follow these instructions to eject it.
Step 6
Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to boot, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can boot now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
Step 7
If you've booted from an external storage device, make sure that your internal boot volume is selected in the Startup Disk pane of System Preferences.
Boot in safe mode. Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Post for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
When you boot in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, your boot volume is corrupt and the drive is probably malfunctioning. In that case, go to Step 6.
If you can boot and log in now, empty the Trash, and then open the Finder Info window on your boot volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then reboot as usual (i.e., not in safe mode.)
If the boot process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
Step 8
Launch Disk Utility in Recovery mode (see Step 1.) Select your startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then reboot as usual.
Step 9
Reinstall the OS. If your Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
Step 10
Repeat Step 9, but this time erase the boot volume in Disk Utility before installing. The system should automatically reboot into the Setup Assistant. Follow the prompts to transfer your data from a Time Machine or other backup.
Step 11
This step applies only to models that have a logic-board ("PRAM") battery: all Mac Pro's and some others (not current models.) Both desktop and portable Macs used to have such a battery. The logic-board battery, if there is one, is separate from the main battery of a portable. A dead logic-board battery can cause a boot failure. Typically the failure will be preceded by loss of the settings for the startup disk and system clock. See the user manual for replacement instructions. You may have to take the machine to a service provider to have the battery replaced.
Step 12
If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store, or go to another authorized service provider.

What do I do if my IPad wont turn on completely and what I mean by that I see the Apple logo and I think that it is turning on and then after a while i see the loading symbol which means that it isn't frozen and then all of a sudden it shows the apple log

What do I do if my IPad wont turn on completely and what I mean by that I see the Apple logo and I think that it is turning on and then
after a while i see the loading symbol which means that it isn't frozen and then all of a sudden it shows the apple logo once more and it repeats the above

Try this first.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.
If that doesn't work, try restoring the iOS software.
iTunes: Restoring iOS software - Support - Apple
If that doesn't work, try this.
iOS: Unable to update or restore - Support - Apple

After trying to update my iphone 5 to ios 7 via itunes my phone will not work at all, all i have is an itunes logo and cable logo on the screen HELP!!!!

after trying to update my iphone 5 to ios 7 via itunes my phone will not work at all, all i have is an itunes logo and cable logo on the screen HELP!!!!

you'll want to restore it using itunes and recovery mode
http://support.apple.com/kb/ht1808

I was trying to transfer iTunes from my iPhone 4 to my new Mac Pro and now all i can get on my phone is the iTunes logo and a usb cord pointing to plug into it. my phone wont do anything else? Help if you can?

I was trying to transfer itunes to my macpro from my iphone 4 and the phone froze up with the itunes logo and a usb cord looking like its suppose to plug into the itunes.. Now my phone wont go past that screen and i cant use the phone at all... Help if you can?

Contacts are designed to be synced to a supported application on the computer or a cloud service.
Pictures taken with the device are designed to regularly be copied off the device to a computer as would be done with any digital camera.
If you have failed to use the device as designed it may be too late to recovery anything.
Is the device regularly backed up to a computer via iTunes? If so, the most recent backup (when restored to a replacement iOS device) should contain all contacts and pictures as of when the backup was created.

How do I get the book title and author to appear on all pages?

I'm trying to create a new layout, and I can't quite figure out some of the auto-text boxes.
I'd like the book title, and author to appear at the top of the pages.
Also, I'd like the chapter title to be at the top of the page for the subsequent chapter pages, but not in the same size as the chapter title at the beginning of the chapter.
I've tried copying the chapter text box in layouts, then applying it to the chapter pages. However, when I reformat the copied box for text size and orientation, the reformat effects all instances of that text box. Grr.
(I know this all sounds like too much text and garbage on each page, but it's for an instructional piece that people will likely print a page or two at a time)

Hello Andy,
Have you looked at the Layout Section.
If it is not visible pull down the handle and the master pages are there down the list for you to add and change.
Just first duplicate any page that you may want to change and then add the name and author titles to that page and press "APPLY"
I hope this helps…
Regards,

My ipod touch is stuck on the apple logo and after a while a white screen comes up and it restarts and the same thing all over agan. this happened to me before and after a while it turns on but why does it keep on doing this?

my ipod touch is stuck on the apple logo and after a while a white screen comes up and it restarts and the same thing all over agan. this happened to me before and after a while it turns on but why does it keep on doing this?

Try connecting the iPod Touch to your computer and restore it. http://support.apple.com/kb/HT1414

Logo and authors on all slides

Similar Messages

Maybe you are looking for