Logo and NavBar
Is there a way to remove application logo and navigation bar for a certain page without using Printer Friendly? For other pages, logo and navigation bar will stay.
Thanks,
Yivon
In order not to display navigation bar for few pages.
Click on Navigation Bar link of the right bottom side of any Page.
Click on Condition TAB.
Select the condtion : Current Page != Expression 1
and in expression1 enter 1 , 2
it will not display Navigation bar in page 1 and 2
Similar Messages
-
Combined logo and navigation bar
Is it considered to be poor layout to combine the company
logo and navigation bar in the same image? I have created this
image in Fireworks 8 as a jpeg to keep the gradients looking good
for both the logo and navbar, but am not sure if it makes the page
load any slower by having them in the same image? I do have
rollover buttons on the navbar so I do have to export it as
‘HTML and images’ w/slices. I do find it easier to
setup in Dreamweaver if they are together but could separate them
with some extra work. Any suggestions? Thanks for your help.Navigation in an image? What - are you using hotspots?
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"Alex Mariño" <[email protected]> wrote in
message
news:erv068$hon$[email protected]..
> The bottom line is - how big are your images. If adding
the logo does not
> increase the file size significantly then all is well.
>
> alex
>
> P-C-Surgeonz wrote:
>> Is it considered to be poor layout to combine the
company logo and
>> navigation bar in the same image? I have created
this image in Fireworks
>> 8 as a jpeg to keep the gradients looking good for
both the logo and
>> navbar, but am not sure if it makes the page load
any slower by having
>> them in the same image? I do have rollover buttons
on the navbar so I do
>> have to export it as ?HTML and images? w/slices. I
do find it easier to
>> setup in Dreamweaver if they are together but could
separate them with
>> some extra work. Any suggestions? Thanks for your
help. -
I tried updating my iPod 5th gen to iOS 8 but it only shows me a picture of the iTunes logo and a charger at the bottom, I'm not sure what this means or what I need to do. Can someone please help me?
After restoring to factory settings/new iPod you will then have to restore from backup
To restore from backup see:
iOS: Back up and restore your iOS device with iCloud or iTunes
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store -
How do I fix a initializing problem with my macbook pro? I only get to the blank screen with the apple logo and the "processing something" sign... it just doesn't start the system....
Please help
MarceloIf there is no loading bar, it's usually a problem with a third party kext file in OS X itself.
You can press the power button down to force a hardware shutdown, then reboot holding the shift key down on a wired or built in keyboard, this will disable them and you go around and update your third party software.
Gray, Blue or White screen at boot, w/spinner/progress bar
Also take this time to backup your users files off the machine if possible.
Most commonly used backup methods
Sometime that won't work and you need to do more
..Step by Step to fix your Mac -
after trying to update my iphone 5 to ios 7 via itunes my phone will not work at all, all i have is an itunes logo and cable logo on the screen HELP!!!!
you'll want to restore it using itunes and recovery mode
http://support.apple.com/kb/ht1808 -
HP Color LaserJet Pro MFP M177fw screen frozen on hp logo and energy star icon
My HP Color LaserJet Pro MFP M177fw screen is frozen on hp logo and energy star icon. It has only printed the test page, and will not print otherwise. I have tried unplugging for 60 seconds, and even uninstalled it and reinstalled it with the latest download - still no change. None of the other icons outside the screen work either (home, help, etc.) about all i can do is turn it off and on. Also, I obviously cannot make copies etc since I cannot access any of the functions. Please help! and thanks in advance!
Hi , I read your post and see that the printer is frozen on the HP Logo and Energy Star Icon. I would really like to be able to help you resolve this issue.
I have provided some steps to try to see if we can resolve this issue. Disconnect the USB/Network/FAX and power the printer on Standalone. Check and remove any packaging material inside the printer and toner. Do a hard reset to see if that will resolve the issue.
Leave the printer on and unplug the power cable from the printer and wall outlet for 60 seconds.
Then reconnect the power cable to the printer and wall outlet rather than a surge protector.
This ensures the printer is receiving full power and may help this situation. If the issue persists, perform a power drain by disconnecting the power cord from the back of the printer and keeping the power button pressed for 30 seconds and in case of a power switch keep the switch in ON position for 30 seconds before reconnecting the power chord. Update the printer's firmware, make sure you run this through a USB connection. It may not detect the printer in this error state though. Software and Drivers. Select Option 2 and wait for the page to load and then select the link for firmware. I can send a private message with some another step to try.
In the forum beside your handle name just click on the envelope to view it. How is the printer connected? (USB/Ethernet/Wireless) Please let me know the outcome. Have a nice day!
Thank You. -
I was trying to transfer itunes to my macpro from my iphone 4 and the phone froze up with the itunes logo and a usb cord looking like its suppose to plug into the itunes.. Now my phone wont go past that screen and i cant use the phone at all... Help if you can?
Contacts are designed to be synced to a supported application on the computer or a cloud service.
Pictures taken with the device are designed to regularly be copied off the device to a computer as would be done with any digital camera.
If you have failed to use the device as designed it may be too late to recovery anything.
Is the device regularly backed up to a computer via iTunes? If so, the most recent backup (when restored to a replacement iOS device) should contain all contacts and pictures as of when the backup was created. -
My MacBook Pro stated that it needed to be updated. I clicked yes to restart the computer and update but when it restarted it stays on the gray screen with the apple logo and then pops up, stating "unable to find driver for this platform." What do I do?
Boot into Recovery by holding down the key combination command-R at the startup chime. Release the keys when you see a gray screen with a spinning dial.
Note: You need an always-on Ethernet or Wi-Fi connection to the Internet to use Recovery. It won’t work with USB or PPPoE modems, or with networks that require any kind of authentication other than a WPA or WPA2 Personal password.
When the Mac OS X Utilities screen appears, follow the prompts to reinstall the Mac OS. You don't need to erase the boot volume, and you won't need your backup unless something goes wrong. If your Mac didn’t ship with Lion, you’ll need the Apple ID and password you used to upgrade, so make a note of those before you begin.
Don't install the Thunderbolt update -- it's defective. -
My iPhone 3gs has frozen while doing update 5.0.1 I think it was. All it shows is the iTunes logo and the usb cable on the screen. I will not turn on or off. I have tried reconnecting to iTunes but nothing happens. Have held both buttons for 10 seconds etc and nothing is working! What can I do?
Here are Apple Steps: http://support.apple.com/kb/HT1808
-
Want to change company logo and address.
Hi all,
Here i have one Standard print report "SAPF130K" for customer or vendor balance conformation . But when i run this report this time i get logo of company "IDES HOLDING AG" and getting address of this company. but customer number and his address get properly but now i want to get my company logo place of this "ides holding ag" . For this i find many thing in SE71 tcode but i am still not able to change this logo and address so can u please kindly help me out how can i change this both.
Thanks in Advance.
Keyur@ Anurag_N: This is not ALV, but SAP SCRIPT report.
Hello,
This standard report is using form F130_CONFIRM_01 for the printing purpose.
Please check in this form, how you can handle ur logo.
R u doing any config for printing this report for the form etc?
This text is coming from the window ADDRESS and the below inlude:
INCLUDE &T001G-TXTAB& OBJECT TEXT ID ADRS LANGUAGE &T001-SPRAS&, where &T001G-TXTAB& for me is coming as
ADRS_SENDER.
So, just add ur logo in the standard text ADRS_SENDER in SO10, you will c it in the sap script layout.
But, i am not sure how this variable &T001G-TXTAB& gets populated and if it will get changed for soem other value.
Edited by: Kanwardeep Singh Gill on Apr 9, 2010 12:30 PM
Edited by: Kanwardeep Singh Gill on Apr 9, 2010 12:35 PM -
My iphone is no longer working I have black screen with a picture of the itunes logo and a USB cable. When I try to connect my iphone to itunes the device is not detected, can anyone help me? I desperatley need my phone back
I have had a 3GS for 2+ years. After upgrading to IOS 4 (now 4.3.5) I began having problems. In the past week, my screen went to the itunes logo and USB cable twice -- unprovoked -- just found it sitting there like that! I connected to itunes and it did restore from a backup but it is a major inconvenience. I am also searching for answers, but better back-up regularly!
-
my iphone 5 on the ios 7.1.2 suddenly wont fully turn on...it gets stuck on the apple logo and stays like that for approximately to 90 secs then goes blank but I can see a bit of lighting behind the dark screen....it goes off by itself and comes on by itself trying to boot but still gets stuck on the apple logo after the dim light shows....when I connect to iTunes my phone can only be recognised only in recovery mode thus if I force it into recovery mode. My main worry is I don't have a back up of any of my data...on icloud I have just less than 2GB of my data which is as a result of incomplete back up...HOW CAN I GET THIS PHONE WORKING AGAIN WITHOUT LOSING MY DATA...if I can only just recover my data I would really appreciate it as I really need almost everything on it back...if I can only get retrieve my data and lose the phone I wouldn't mind at all....Anybody know how to resolve this??Kind Regards
Anyone have any suggestions? or is everyone else just as clueless as me !
-
hi i rescently updated my ipad 4 in ios 7.0.4 and for resell purpose i want to restore my ipad via itunes but it got stuck at apple logo and progress bar of 45% completed i tried it 50 times but it stuck on that exact point for hours i cant able to restore it and had no errors it just like freezes at one point i also uses dfu mode but got stuck at same problem using windows 7 32 bits itunes 11.3.8 ipad 4 wifi please help
My iPhone 5 wouldn't start after I turned it off a few minutes after writing this. It went into recovery mode and I had no choice but to connect to iTunes on PC and restore.
I restored to factory setting first, just to validate my phone was okay. For a second consecutive iOS update, the iPhone 5 did not update smoothly while connected to PC and iTunes - I had to retry two times before the progress bar for the update showed. (The exact same problem with the restart occured when I updated to 7.0.4.)
The good news is that I was ultimately able to restore the iPhone 5 to factory settings while running iOS 7.0.6. I did have a backup from about a month ago lying around and was able to successfully restore with that as well, so the damage done is almost negligible since I had my contacts, notes, mail, etc. backed up to iCloud.
Once I completed both restores, the sync with iTunes worked fine. -
I have a mac book pro with retina,I haven't turned it on in a couple of months.no problems then, now when I try to turn it on i only get apple logo and progress bar. After a few mins the laptop just turns off and nothing eles.any help would be appreciated thanks
I linked to it above, but here is another link.
http://support.apple.com/en-us/HT201262 -
my ipod touch is stuck on the apple logo and after a while a white screen comes up and it restarts and the same thing all over agan. this happened to me before and after a while it turns on but why does it keep on doing this?
Try connecting the iPod Touch to your computer and restore it. http://support.apple.com/kb/HT1414
Maybe you are looking for
-
Upgrade to Snow Leopard disabled iPhoto editing capabilities
Upgraded to Snow Leopard, using iPhoto 8.1 (415). Problem: Scanned numerous photographs at color 600 dpi on Canon Pixma500, then exported scans to jpeg, then imported into iPhoto Result: Many will not edit. Here are the symptoms: (1) Using full scree
-
Click wheel doesn't work, is it because of my italk?
whats up with that? why isnt my click wheel working? ive had my ipod since early march when i won it from a magazine, it was workin fine, up until i bought my italk, to record things, well, my ipod's been freezin up on me, and its making me upset, cu
-
"Document Domain could not be saved."
Evening folks, I'm working on a website and I'm trying to save and I'm getting an error that says "Document Domain could not be saved." A little background. In mid-may I wiped my drive and re-installed leopard. I reloaded iweb 09 and brought in the d
-
Reg - Deployment Error in NWDS7.0
Hi All , Im trying To Deploy Web Dynpro Sample Application By Creating project Name and Application and Iview . When im try to deloy the application after giving SDM Pasword it throws Following Error . please suggest Valueble inputs . com.sap.tc.web
-
Multiple access or multiple statement
In our scenario we have multiple records coming from SAP and we have to INSERT into Database. We have modeled a XML-SQL jdbc document format in the target data type. There is one issue that we need to clarify here.This would be regarding the occurenc