Logo and text required in the same window adjacent to each other

Hi experts,
Kindly provide a solution to get logo and some text adjacent to each other inside a single window using SAP SCRIPTS.

pass th logo in to paint and add the text u want in to it.......
and make it as a image file ...
and use that image in ur script................
Regards
Anbu B

Similar Messages

N my house we have 2 iphone 4, and everytime we get the same contact list freom each other, how can we unsync the contacts so each user keeps thir own contact list?

n my house we have 2 iphone 4, and everytime we get the same contact list freom each other, how can we unsync the contacts so each user keeps thir own contact list?

Hi user 1724, before icloud, we had the same issue....
so yes, the solution was to each log into the mac separately.
i kept the main itunes library and apple id, and my son made his own itunes library (which linked to the main itunes/apple id) - so we were able to maintain separate contacts lists.
but then w/ the cloud i guess we assumed the cloud would know we each have different contact lists on diff. phones, but it seems the cloud just lumped it all together -

I need to know how to edit a drawing - basically remove the arrows and text but at the same time match the background of the existing pic. then re add new text. how do i erase the arrows and text and arrows but match current background of pic. step by ste

i need to know how to edit a drawing - basically remove the arrows and text but at the same time match the background of the existing pic. then re add new text. how do i erase the arrows and text and arrows but match current background of pic. step by step explanation please beginner

Please post (a relevant section of) it right on this Forum.

Code needed for "putting waveform graphs and 8bit images in the same window by Windraw"

Hi Micheal, please sent the code example for my question:"putting waveform graphs and 8bit images in the same window by Windraw" , thanks.

You can start from here ...
Hope that helps,
Michael
Attachments:
tester.vi ‏97 KB

Putting waveform graphs and 8bit images in the same window by Windraw

How to put waveform graphs and 8bit images in the same window by Windraw VI?

Use "Invoke Method: Get Image" to get a pic of your waveform graph/chart. Then combine this pic with your 8bit image using the IMAQ tools (IMAQ ImagetoImage). If you need an example send an e-mail again ...
Michael

I have tried 10 times to install creative cloud and it quits in the same place (50%) through each time.

I have tried 10 times to install creative cloud and it quits in the same place (50%) through each time.

Nobody can tell you anything without proper system info or other technical details like the install log. If it always stops at the same spot, something specific happens like waiting for a specific user input, running out of disk space or simply triggering some external process like a virus scanner that may block the install, but never properly produces a warning dialog.
Working with your Operating System’s Tools | Mylenium's Error Code Database
Troubleshoot install issues with log files | CS5, CS5.5, CS6
Mylenium

How can I have two PDFs open at the same time next to each other?

How can I have two PDFs open at the same time next to each other?

Moved to Adobe Reader for iOS.
The only way I know how to do that is with two iPads.

Is it possible to run LabVIEW 7.1 and 8.5 under the same Windows installation?

We have an older version of LabVIEW (7.1) which includes functionality for Event Notifications and the base version of LV8.3, which does not seem to contain this functionality.
Is it possible to run both of these from the same Windows Installation? If not I plan to create a new partition and a new Windows installation just to accomodate the two of them.

Something else to consider is windows compatibility. If you are running LabVIEW on Vista, I would highly discourage installation of Lv 7.1 and 8.5 on the same machine (even if they were different partitions), since there are some significant issues in terms harware compatibility.I am running windows 7.1 and 8.2.1 on a test station with no problems, but the OS is Win XP. My biggest gripe about the dual software system is when a v 7.1 files is opened up by 8.2.1. There is not a system to prevent it from happening, and once we accidentally save a 7.1 app in 8.2,1, going back to 7.1 is a big headache.

Can PSE6 and CS3 exist on the same Windows computer?

Sometimes CS3 is too much for the task. Can the 2 peacefully co-exist on the
same Windows machine?

I know there are conflicts with Elements 4 and Bridge but have not heard any problems with 6 and Bridge or PhotoShop.

How can I save images and text data to the same file?

I have been looking at ways to do this for a while. My main VI saves the raw data to a text file which the users then import to Excel and plot. I am trying to simplify this process and have been looking at ways to accomplish this task. I want to be able to save the raw data to a file and then save the Labview graph as well. This will eliminate the tedious task of importing the raw data into Excel and plotting it. I can save the raw data to its own file and I can use the Get Image method for the graph and save it to its own file. I am currently using the .png format. Is there a way of saving both to the same file ie, importing the image into Excel or Word etc. Before I go off doing a science project I wanted to see if anyone else had experience completing this task and had any recommendations. Thanks in advance for any help.

well ther are a couple of ways. You could use the standard report generation VI's and make a complete report with the image of the graph embedded into the report with the raw data or you could use activeX and control excel thru LV and put the raw data into excel directly and have excel graph the data without any user interaction. I have posted a slew of VI's on the excel board if you do not have the report generation toolkit. If you could tell me which way you want to go I could possibly send you an example.
For more information and some sample VI's and tool kits, you can go to the excel board
Joe.
"NOTHING IS EVER EASY"

Using currency conversion and text variable at the same time

Hi all,
In a 3.5 bex query, i am applying currency conversion on a key figure with a variable of 0currency.
as i know, to be able to apply currency conversion, variable of currency should not be in Free characteristics or in Filter.
it has to be selected only on the key figure.
but now, i want to use text variable for selected currency (with type replacement path). But as i know, to be able to use text variable, variable of currency has to be
in Free characteristics or in Filter.
Can you please advise, how to both use currency conversion and text variable on currency?
Thanks in advance.
Sancho

Sancho,
I'm not 100% sure about this, but I'm thinking that if you are pulling the text variable from a selection in a structure, you should not need it in the free characteristic or filter. Try creating a structure, placing the currency in it as a selection, and creating a text variable as the title for the selection that is based on the currency. This may help.
Cheers,
Rusty

3 iphones on the same iTunes account receiving each other's calls

I have 3 iPhones on the same iTunes account and they were receiving each other's texts. I adjusted the numbers to send and receive under messages in settings, but now they are receiving each other's calls. Which settings do I need to go to?
Thank you

The phone calls going to other phones/iPads is a new feature described in Connect your iPhone, iPad, and iPod touch using Continuity
You can turn it off by going to Settings > FaceTime and changing "iPhone Cellular Calls" to off.

Two Telnet read VI's running at the same time interfere with each other

I have a situation where multiple tests must test multiple UUT’s on the same computer. To send commands to and get responses from the UUT's I use a telnet session. The telnet read VI uses a semaphore. Therefore when two separate top level VI's are running, each calling the Telnet read VI, if one Top Level VI is using the Telnet Read VI the other Top Level VI waits for the first one to complete before it can use the Telnet Read VI. This VI is setup for reentrant execution but because of the semaphore it cannot truly be used as a reentrant function. This causes severe problems when trying to communicate with two different telnet sessions simultaneously.
In the past I have avoided this problem by compiling everything into an executable. Then each Top Level program runs completely independently with no interdependences. However, now I am implementing Teststand and I need to call the same Top Level VI's. I need to be able to get information into them and back out of them from Teststand. This means that I can no longer compile them into stand alone executables. I did compile each top level VI into its own Share DLL thinking that then each top level program would have its own library to call upon. This did not work. Even though both top level programs are compiled into their own DLL there is still interdependency when calling the telnet read VI. One program waits for the other to finish reading from its telnet connection before it can read from its own telnet connection. Since I have to continuously read from the telnet connection, sometimes for up to half and hour, the tests do not function simultaneously. How can I get around this? Is there a solution?
Josh
PS The Telnet Read VI I am refering to came with the Internet Toolset package. Attached is a copy of the VI I use to communicat with the UUT's.
Attachments:
GUI_Telnet_W-R_Auto.vi ‏64 KB

Sorry about the confusion.
The file I attached is in the hierarchy of two separate top-level VI's. The telnet connect is opened once and closed once in each top-level program. The ref number is then passed into and out of the VI that I attached. I use this VI to repeatedly send commands via telnet and wait for the appropriate responses. The telnet read VI is given a read line separator and reads from the telnet connection until it matches the read line separator with a text string read back from the telnet connection. If not match is found it times out and creates an error.
I am not sure how to provide an example of the overall scheme since the problem occurs when both top level VI's are compiled each into their own shared DLLs. Those DLLs are then call from Teststand and at some points they are both running at the same time on the same computer connected to two different UUT's.
The question I have is why does one DLL share functions with the other? When one DLL is using the telnet read VI the other DLL waits for the first one to finish with it before it can it use the telnet read VI. If they were both compiled separately each into their own DLL shouldn't they each have their own set of functions to call upon instead of having to share? I know that if the two top-level VI's are not compiled they cannot both execute the same sub-VI at the same time. The only way to get around this is to set the execution property on the sub-VI to reentrant.
I actually fixed the problem by setting the VI I attached and the Telnet Buffered Read.VI (called by Telnet Read.vi) execution properties to reentrant. However, I am still concerned about two separate DLLs sharing sub-VIs. Why does it do this?
Joshua

Can I have two LANs with the same IP route to each other

Hi there,
I have a customer who has a televantage voip network on a private 192.68.0.0/24 network but has two sites connected via a wireless tower that wants to enable QOS over between the two sites by using a 2621XM router at each end. I've enabled QOS on both routers for voice and video but haven't deployed this yet since I'm not sure if I need to change one of the sites networks to a different network number since I'll have the routes in place with a 192.168.1.0 on the WAN side. If both remote networks stay with the same number scheme of 192.168.0.0/24 will they be able to find each other when requesting where a remote 192.168.0.0 host is or do I need to change of the offices networks to a 192.168.2.0 network to make this work? Sounds kind of basic but before deploying I wanted to get some input...thanks.

Routers cannot route unless the address blocks for each interface are different.
If you have two sites connected by any kind of link, and you'll use one site as a gateay to the Internet, then you'll need at least four different addresses/ blocks:
The 'b' site LAN, i.e., fa/0/0:192.168.0.0/24
The 'b' site WAN (interconnecting link), i.e., fa0/1: 192.168.1.1/30
The 'a' site WAN (interconnecting link), i.e., fa0/1:192.168.1.2/30
The 'a' side LAN, i.e., fa0/0:192.168.2.0/24
(assumes that your wireless link is acting as a bridge or non-routing link) - the fa0/1 device connects to the wireless devices).
If you use the same router on the 'a' side for the interconnecting link for both the 'a' LAN and the Internet gateway, then the third interface would be your Internet WAN address.
The 'b' side LAN interface is your 'b' side default gateway for you clients
The 'a' side LAN interface is the 'a' side default gateway for your clients
Set a default gateway on the 'a' router to the ISPs Default gateway / next hop address.
If you're using a third router for an Internet gateway, then the LAN interface address becomes the default gateway for the clients on that LAN, and you'll need to set up a static route pointing to the other LAN in the routers that connect the two LANs..
A routing protocol may be useful but, depending on your actual bandwidth available, it's probably better to just set up static routes (no routing protocol bandwidth utilization).
The /30 for the WAN link gives some economy of address usage, but it may also secure the link better, since there are no additional addresses for the intruder to use; they'd have to spoof one of the two valid addresses (.1 & .2) as well as crack your encryption (and / or other security).
There's an armload of other possible configurations / topologies / address schemes, I believe this one would be reasonably common.
The bottom line is that a router can only route from one address block to another. In order to pass traffic between two segments with the same address block, you need a bridge / switch, or some other layer one/two device (like a wireless transceiver pair).
Good Luck
Scott

Best back up software and hardware requirement for the same

Good morning to all,
I would like to know about back solutions. We are a small organization around 60 employees, currently we have windows server 2008 r2 and using symantec backup exc and we back up on external USB drives. Management not happy with Symantec
We plan to upgrade our servers , and moving to VMs and plan to implement network storage.
So we want a back up solution which could back up VMs ,Shared folder and other required data.
What are the best practice and solutions for backups.

Nopes :)
It depends on you. I've been using Symantec from many years now ;)
Arnav Sharma | http://arnavsharma.net/ Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading
the thread.

Logo and text required in the same window adjacent to each other

Similar Messages

Maybe you are looking for