Logo created in cs6 and I need to either clone it or export it to illustrator...

So I have created a logo in CS6...
I would like to use the logo on a letterhead but when the letter is saved as a pdf the letterhead is pixelated. The logo is text only with effects on the lettering.
I need be able to either export the logo into illustrator and convert it to a vector image or recreate it.
My issue #1
I would prefer to export the .psd file to illustrator but when I do it is very pixelated...
My issue #2
I am not very familiar with illustrator and I cant seem to recreate the file...
Does anyone have any ideas?

John Mensinger wrote:
My issue #1
I would prefer to export the .psd file to illustrator but when I do it is very pixelated...
That indicates the size and resolution of the original are inadequate. Besides, just putting a raster image in Illustrator doesn't make it vector art, so even if it was of adequate size and resolution, you'd still have an obstacle to overcome.
I am not very familiar with illustrator and I cant seem to recreate the file...
The bevel/emboss effect you applied to the X isn't (effectively) available in the vector realm, and, the drop shadow on the rest would be a raster effect, even if the text was vector.
I would have to assume you are pursuing a vector conversion because you've been advised that one or another output method requires vector artwork. So consider that the process which demands vector art is incompatible with raster effects too, (not just full raster images), so you may have to give them up for this particular application.
So there's no way to actually get that bevel/emboss effect as a vector?

Similar Messages

I have two copies of CS6 and I need to find out which serial number is installed on which computer. How do I find the serial number once it's installed on a computer?

I have two copies of CS6 and I need to find out which serial number is installed on which computer. How do I find the serial number once it's installed on a computer?

if they're pcs, Belarc Advisor - Free Personal PC Audit, for software, hardware and security configuration information on your computer.…

I'm creating an epk and I need to add a bio to the menu. Can I import the text file or do I need to retype the bio somewhere? What is the best way to proceed?

I'm creating an epk and I need to add a bio to the menu. Can I import the text file or do I need to retype the bio somewhere? What is the best way to proceed?

Electronic Press Kit.
Usually in the form of video outtakes, movie trailers, cast and crew interviews. Basically, the stuff that gets bunged onto commercial DVDs as extras or ends up on late night TV "Making Of..." shows.
To answer the OP, you want a button on the menu that leads to a still image, or series of them, set up as a slide show. You can copy/paste the text in DVD Studio and then add formatting via the Text menu. (Highlight the text and right click to access formatting controls). Or do it in a graphics application using the appropriate video image preset.

I want to use Xcode to create an app and i need developer tools. so i need to join the devoper program only problem is I'm not 18

i want to use Xcode to create an app and i need developer tools. so i need to join the devoper program only problem is I'm not 18

You can get Xcode without joining the developer program. Just go to the App Store and download it (it's free).
You'd only need to join the Developer program if you want to put your app into the App Store, this is for OS X.
You will need to join the Developer program if you want to develop for IOS. In that case you will need a parent or guardian.

How to pull sales orders based on a Campaign??( I have created one Campaign and i need to know,for how many orders it was applicable)

How to pull sales orders based on a Campaign ID??( I have created one Campaign and i need to know,for how many orders it was applicable)

Hello,
as far I understand you are talking about campaign determination. Once a sales order is generated having a campaign determined the campaign creates a reference to the sales order. The best way to track the assigned sales orders is using the related transactions function:
The same feature is available for trade promotions as well.
The data is available in table CRMD_BRELVONAE - you can also write a report selecting on OBJGUID_A_SEL with the campaign or TP guid and OBJTYPE_A_SEL with BUS2010020 for campaigns and BUS2010030 for trade promotions.
Is this answering your questions?
best regards,
Johannes

Hello - I have done a series of edits on premiere cs6 and now need to transfer info to the client overseas so I have to transfer the rushes and would like to know what I need to provide ( list...) regarding the edit done on the CS6 version - thank you

hello - I have done a series of edits on premiere cs6 and now need to transfer info to the client overseas so I have to transfer the rushes and would like to know what I need to provide ( list...) regarding the edit done on the CS6 version - thank you

>I have managed to download the footage onto Picture Motion Browser
Isn't Picture Motion Browser available for Windows only? If so, why are you posting in an Final Cut Express forum? My apologies if I'm incorrect.
-DH

I bought CS6 and i need to install it on a new computer but i no longer have access to the email i used so what do i do

I bought CS6 when i was at my old school with that email i am no longer able to get into that email and i need to install it on my new computer. How would i do that?

if you have it installed on a pc, you can recover the serial number using belarc advisor.
if you purchased from adobe or registered with adobe, they may be able to help you get that serial nuimber. contact adobe support by clicking 'still need help' as soon as available, https://helpx.adobe.com/contact.html

Definitive answer on PP CS6 and SLI needed.

Howdy gang...
I'll be building a computer to run Premiere Pro and was curious about SLI capabilities. So, I did a Google search and found conflicting advice from this forum (and others) about the topic. As it seems I cannot contact Adobe directly, I'll try it here (although others have apparently tried to find the answer previously).
I have GTX 570 that I removed from my gaming box after replacing it with a 670. From what I gather, the 570 is a nice card to use with PP. I thought I might add a second 570 if the improvement in performance was worthwhile. The best answer I've found on the SLI question was this one (thanks to the original author on a different forum): Premiere pro cs6 can use only one gpu for all the cuda stuff but the other gpu will not just be wasted.... it will be used for stuff such as display scaling , color space conversion etc
He/she goes on to say the following: After effects otoh will take advantage of both gpus....
So, it appears to me that a second card would not be entirely wasted in PP CS6 and that it would definitely be to my advantage if I was to also use After Effects. Fair assumption?

PrP uses one GPU for CUDA acceleration. After Effects can use multiple GPUs when doing Raytracing mode. Otherwise CPU is used .

Logo of the Company and address needs to be displayed in Reports

Hi All,
Currently i am working on financial analysis like P&L , Balance Sheet , Ratio , Cash Flow Analysis. Currently i was analysing report through RSRT . but my client is using excel sheet so i have to show reports in BEx Analyzer.
I am running query in BEx analyzer but it was showing me Author Name , Status So, i dont want that in all the reports. So what to do if i don't want it in all reports ?
I also want to put company's logo or if possible company's address also in the header of the report . but how to put there that i don't know.i have heard about Work book but i dont know how to use it and if i create one workbook then for other report do i need to create other work book or only one work book is required for all the reports.
if anyone is having documentation realted to workbook or anything else which can help me so please let me know.
Regards,
Komik Shah

Hi Daya Sagar,
Thanks For reply.
I have gone through your document . i got up to page 14. then on 15 page it's asking for permenant workbook template so, i am not getting that one.. i clicked on BEx Analyzer --> Global Settings > Default Workbook> i select use current work book ... so it gave me which i created.
Now i am not getting the 3rd point of your document..
currently i want to test for only for one query and once it is designed and gives the output perfect then only i want to go for next. ...
can you brief on this.. i appreciate your efforts.
Regards,
Komik Shah

Can I add a watermark/company logo created in PS and save it in Lightroom?

I want to know if I create a watermark/company logo in PhotoShop can I save it to my pics in Lightroom?
Thanks for any help,
Max

The best way to do it is to use the print module.
* Set up a paper size that doesn't change the size of the picture:
3528 x 2362 needs (say) 11.76 in x 7.87 in at 300 dpi or 20 x 30 cm
* Turn on on the identity plate
* Use a graphical identity plate
Print to JPEG (or any other output file as desired)
Damian

I had InDesign CS6 and I need to reinstall again, how do I do this?

I deleted InDesign CS6 from my application folder.
Anyone know how I can reinstall again?
I need CS6 because my client works in this version.
Thanks

Download and install. Activate using your serial number (Look in your Adobe account online for it)
Download CS6 products

Workflow to deactivate CS6 and clone

Hello Enterprise Deployment,
How do you deactivate/deserialize CS6 from a computer that is about to be cloned/image created from?
Background: I've successfully installed and serialized CS6 using AAMEE3.0 in my computer lab. Now its sometime in the future and I need to reimage/clone my lab again. My workflow is to select one of the lab computers and make clone image of it. Problem is this computer has a working copy of CS6 on it, so the image will not work on the cloned computers - breaks the one to one relationship. I'm hoping there is some easy way to deserialize computer and not be forced to do another 1) uninstall CS6, 2) install trial copy, 3) image, and 4) serialize. I must be missing something because this is way to difficult.
thanks,
Jeff Jensen

Nancy Olivier are you trying to install Creative Suite 6 on a computer which already has Creative Cloud installed? If so then please see Install and update apps - https://helpx.adobe.com/creative-cloud/help/install-apps.html for information on how to install previous version of Adobe Creative titles through your membership.

I'm a very new user and I need some help!

I have recently started a new job and our website is managed through Dreamweaver, which I know nothing about. I was getting along until I was given a new computer. We installed a new version of Dreamweaver and when I launched it for the first time I was expecting to be able to see the local and remote sites, the way I could on the old computer. However, the remote site was not available. Please forgive my ignorance, and I did hunt for this info in the tutorials etc, but if I am communicating with the remote site, shouldn't all those files be listed without me having to put them there?

I did try. Alot of what I found dealt with creating pages and templates, which I will need soon, but not yet. I found the link below. It looked promising, but didn't end up relating to any option I could see for myself to try. I have tested my connection already so I believe I entered all the ftp information correctly.
Open and edit existing documentsYou can open an existing web page or text-based document, whether or not it was created in Dreamweaver, and edit it in either Design view or Code view.'

First a bit of thanks and then need some help

First I want to thank so many people who contributed to resolving Y2P issues such as drivers, battery life, flickering etc. The issues were really killing my enjoyment of a laptop I thought I'd love but was almost ready to take back after just a week of ownership. I was about to buy a Macbook Pro and at the last minute went for the Y2P because I wanted a touch screen for some things and was starting to regret my decision especially when my battery life was so terrible and the cursed screen flickering. But this forum kept me from getting rid of it.
Now I am left with pretty much just one issue, scrolling with the trackpad. Is there any way ti invert the scroll? It is opposite of what I want and am used to. I was able to invert the scrolling on my Surface RT 2 but on the Y2P I seem to be stuck with the stock scroll.
I have searched all over and I can't seem to find a fix for this. It drives me crazy in some apps. I can't find any tweaks in the Synaptics settings. Any registry hacks that might work?
Also has anyone found a good case for the Y2P? I bought a Thule (13" protective sleeve TAS113) one for a Macbook and it is a bit snug but might work.

I did try. Alot of what I found dealt with creating pages and templates, which I will need soon, but not yet. I found the link below. It looked promising, but didn't end up relating to any option I could see for myself to try. I have tested my connection already so I believe I entered all the ftp information correctly.
Open and edit existing documentsYou can open an existing web page or text-based document, whether or not it was created in Dreamweaver, and edit it in either Design view or Code view.'

I bought a Adobe Illustrator CS6 and I'm having a difficult time getting set up.

I bought a Adobe Illustrator CS6 and I need help installing.

As kglad said, you need to explain better and provide details like system information, what errors you get or whatever...
Mylenium

Logo created in cs6 and I need to either clone it or export it to illustrator...

Similar Messages

Maybe you are looking for