"?" Logo in place of iTunes shortcut logo means what?

After experiencing problems with ipod nano (3rd gen)..recieved replacement which after iTunes finally recognized froze-up/crashed after loading library onto at the "safe to disconnect" phase.
I should add that before this my iTunes shortcut logo showed as iTunes(2)..now in place of that is a question mark logo...does this maybe mean I have unknowingly combined 2 iTunes libraries into one and causing ipod to crash?
Please help..as you all know there is nothing more frustrating than to be without your ipod... Also should add that iTunes works properly playing music..
Really appreciate any help anyone can give me....

CelticGlasgow wrote:
First of all thanks for the reply...
Right,Everything started going wrong a few months ago when I downloaded latest iTunes and it wiped clean my Library..all my music and ipod registration. I found itunes folder on my hard drive and imported by adding the folder as I would add an album. I ended up with every song twice or three times in my iTunes. This scrubbing of my iTunes may be the same as if I'd uninstalled it,like you mentioned.
Very strange.
One way to correct multiple copies is with iTunes, in the Advanced menu it has a "Consolidate Library..."
CelticGlasgow wrote:
The ipod would crash or freeze when I tried to enter into the music categories with no consistency except the "cover flow" option,it would Always freeze if i went into that. The brand new ipod is crashing no matter what I enter into.
It starts normally but you can't navigate the menues? or it freezes when trying to play anything?
If it is the first problem then you have to reset the whole iPod.
The second problem usually is caused by corrupted music files or files in a format that the iPod can't really play.
CelticGlasgow wrote:
And yes,the "?" logo (it still has the iTunes(2) under it) still takes me to iTunes ,which still plays fine and has all my purchased music on it...
That's also strange, if Windows shows the question mark it usually means that the program is not there. Only by editing the shortcut manually you can end with an icon that is not there, so the question mark shows (usually the icon is inside the executable, but you can change that manually).
BTW, you can rename the shortcut (right button menu) and take out the "(2)". You can also change the icon, or at least make the shortcut search for it again inside the iTunes executable; open the Properties (right button click, last item on the menu) and use the respective button.

Similar Messages

  • Iphone 5 not working and giving itunes connect logo

    I just bought iphone 5  2 days before from a local shop here , yesterday it was working fine specially that i just was installing apps on it but when i woke up today morning it was switched off I was thinking the battery was dead but I was little confused because i remember that it was having charge already.
    anyway when i connect it still not working only giving me apple logo going and coming then it giving itunes connect logo when i just try to open
    didn't work in the computer so i just uninstall itunes and re install it. it gave me that the iphone need to be restored and staying more than an hour and nothing happened then i am just trying again now and still waiting ....
    I want to know why this happened and what it means ? does it mean that the iphone not good and better to give it back to the shop ??
    please any one help me because I am really angry it stayed only one day with me specially that I bought it when my previous iphone had been stolen even

    Still I can't do anything ... the phone still same when i tried to re do the steps again given that itunes can't restore the phone " unkown error "
    What to do ?/??

  • Tried synching iphone for the first time on new PC and got error followed by itunes logo and USB cable picture. No idea what went wrong and now phone is in this screen locked. please help!

    tried synching iphone for the first time on new PC and got error followed by itunes logo and USB cable picture. No idea what went wrong and now phone is in this screen locked. please help!

    I tried connecting to iTunes and neither the PC nor iTunes recognizes the device. I went through all the troubleshooting on the Apple website for this issue and nothing worked. I've reinstalled iTunes, the driver, everything and still can't get either the PC or iTunes to recognize the phone.  I don't know what else to do :-( any help or suggestions are highly appreciated!
    I would hate to have lost all my info, especially contacts and calendar items since I have no idea what was backed up prior to the phone getting locked on this screen. I've been told that my only option is to go to the phone carrier and they will reset it for me, but that means it will wipe out all the info.
    I hope someone has a fix other than that one.

  • Stuck at itunes/usb logo, help!!!

    no longer an at&t customer but iphone asks for a sim card for the restoring process to be finished, so now im stuck at itunes/usb logo with a "no sim card installed" note, any help?

    The iPhone 3G requires a SIM card in place when restoring.  If what you want to do is use the phone as an iPod Touch, you need to insert the deactated SIM last used with the phone.
    http://support.apple.com/kb/HT3406

  • I was doing the software update when my iphone died so i pluged it in and when it turnes back on after the white apple on the screen the screen just showes the blue itunes logo over the word itunes over the picture of a charger. ive tried reseting it

    i was doing the software update to my iphone 4s and my phone died. i pluged it in and when it turned on after the white apple the screen showes the blue itunes logo over the word itunes over an image of a charger. i tried reseting my phone. i cant figure out how to get past this point

    See Here  >  http://support.apple.com/kb/HT1808

  • My ipod touch 5th generation is stuck on the apple logo, and i tried fixing it with itunes but it tells me there an error and gives me a code saying i needed to update my itunes and it was.what other ways is there to fix it.

    ipod stuck on the apple logo. i did the itunes thing but it tells me error and gives me a code saying i need to update itunes but it was and i did again but it still said the same thing. help how do i fix my ipod.

    Hey Edgar, how exactly did you do the updates? Are you running iTunes 11.2.2? And you iPod 5 is still running iOS 6.1.2 as your tag shows? or are you running iOS 7.1.1?  More info would be helpful. As Deggie asked, what was the error message, the more detailed the better. One more thing-- is this a Mac machine or a PC? Cheers.

  • Just installed OS 8.3, it opened and locked into iTunes connection logo as opening screen.  I cannot get to any other screen.  Hard close down has not solved it and I cannot get to usual homescreen to access the reset options. Ideas?

    Earlier today my iPad which was using OS 8.2) kept shutting down every few minutes. I thought it might be some new incompatibility connected with the recent release of OS 8.3,.  So, I updated to OS 8.3.  It took many attempts and a very long time - over an hour - because the iPad kept shutting down mid-process.  Supposedly 8.3 is now installed, but all I get is the Apple logo followed by a screen showing a connection, cursor arrow pointing up-screen to a box reading "iTunes".  I cannot get out of that screen to any other screen and can only close by hard shut down, fully powering off (home button + power button). When I restart the device it shows first the Apple logo for a few seconds, then the iTunes connection logo.  Nothing else. This has been going on for about three hours now.  I am not an iTunes user so I am not sure what to think or what to expect..  Is it maybe something to do with iTunes being updated in the background?  3 hours seems a long time for an update whatever it is. Is anyone else encountering this problem?  Does anyone have any suggestions, bearing in mind that I cannot get to the usual opening home screen, so can't get to settings or anything to do a reset. I hope someone can help me with this problem.  Many thanks, Glenys2

    If it has NEVER been jailbroke, here are some standard repair procedures:
    First, try a system reset.  It cures many ills and it's quick, easy and harmless...
    Hold down the on/off switch and the Home button simultaneously until you see the Apple logo.  Ignore the "Slide to power off" text if it appears.  You will not lose any apps, data, music, movies, settings, etc.
    If the Reset doesn't work, try a Restore.  Note that it's nowhere near as quick as a Reset.  It could take well over an hour!  Connect via cable to the computer that you use for sync.  From iTunes, select the iPad/iPod and then select the Summary tab.  Follow the on-screen directions for Restore and be sure to say "yes" to the backup.  You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod.  Again, say "yes."
    At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod.  As before, say "yes."  Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time.  If that happens, only the apps that are part of the IOS will appear on your device.  Corrective action is simple -  choose manual "Sync" from the bottom right of iTunes.
    If you're unable to do the Restore (or it doesn't help), go into Recovery Mode per the instructions here.  You WILL lose all of your data (game scores, etc,) but, for the most part, you can redownload apps and music without being charged again.  Also, read this.

  • HT201210 After updating my iphone. Only the logo and connect to itunes on the screen.

    After updating and system restore my iphone wont open. only the logo and connect to itunes on the screen.

    Hello nicolajan,
    Thank you for contacting Apple Support Communities.
    I see you linked here from TS1275, that is where I would recommend you starting to troubleshoot this issue. Did you follow the steps in that article? If not, here is that link again and I would recommend following all of the steps outlined there.
    Resolve iOS update and restore errors in iTunes
    http://support.apple.com/kb/TS1275
    If that doesn't resolve the issue, then you can move on to this article for more advanced troubleshooting.
    Resolve iOS update and restore errors
    http://support.apple.com/kb/TS3694
    Regards,
    Jeff D.

  • Please could you help my iphone 5 is stuck while in recovery mode, there is a USB sign and an arrow is pointing to itunes symbol, with the Itune red logo symbol

    Please could you help my iphone 5 is stuck while in recovery mode, there is a USB sign and an arrow is pointing to itunes symbol, with the Itune red logo symbol

    Hi Turn iPhone off Connect lead to USB on your PC Press & hold power button down on iPhone  don't let go Connect lead to iPhone keep button pressed until PC sees iPhone then wait for restore . Cheers Brian

  • I plugged my Ipad3 in order to update the software to version 6.1 but I got an error and my Ipad now is locked, it's showing the Itunes logo with usb cable on the screen. What should I do now?

    I plugged my Ipad3 in order to update the software to version 6.1 but I got an error message and my Ipad is locked now, it's showing the Itunes logo with USB cable on the screen. What should I do now?

    You will probably need to restore using Recovery Mode. You can read about it here.
    http://support.apple.com/kb/ht4097
    Or you can follow these Recovery Mode Instructions
    Disconnect the USB cable from the iPad, but leave the other end of the cable connected to your computer's USB port.
    Turn off iPad: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for iPad to turn off.
    If you cannot turn off iPad using the slider, press and hold the Sleep/Wake and Home buttons at the same time. When the iPad turns off, release the Sleep/Wake and Home buttons.
    While pressing and holding the Home button, reconnect the USB cable to iPad. When you reconnect the USB cable, iPad should power on.
    Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears you can release the Home button.
    If necessary, open iTunes. You should see the recovery mode alert that iTunes has detected an iPad in recovery mode.
    Use iTunes to restore iPad.

  • HT201412 I did an update called for on the "Settings". After a while it switched to a picture of a cable from the bottom to an iTunes logo, and won't move from there. What to do?

    I did an update called for on the "Settings". After a while it switched to a picture of a cable from the bottom to an iTunes logo, and won't move from there. What to do?

    Do as the picture suggests. Connect your iPad to iTunes using the supplied USB cable.

  • J'etais en train de mettre a jour mon ipod touch quand tout a coup ça s'arrette. mon ipod touch n'est plus reconnu par mon ordinateur et itunes. un logo itunes et un cable usb apparait alors. Que faire? Aidez moi cela fait 1 mois que je l'ai.

    j'etais en train de mettre a jour mon ipod touch quand tout a coup ça s'arrette. mon ipod touch n'est plus reconnu par mon ordinateur et itunes. un logo itunes et un cable usb apparait alors. Que faire? Aidez moi cela fait 1 mois que je l'ai.

    Il y a beaucoup de choses d'essayer ici: http://support.apple.com/kb/TS1369?viewlocale=fr_FR

  • My ipod is stuck on the apple logo and won't let me connect to itunes to reset it what do i do?

    My ipod is stuck on the apple logo and won't let me connect to itunes to reset it what do i do?

    Try:                                               
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable       
    - Try on another computer                            
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar                                     

  • Itunes & usb logo frozen on screen

    The itunes & usb logo is frozen on screen while I was downloading ios5 on my ipad2. Even when I press the home button & the sleep button together the slide to power off does not appear. Please help

    If you are seeing the iTunes logo and the cable on the iPad screen but the device is not recognized, look here for help.
    http://support.apple.com/kb/TS1538

  • Getting the "NO" symbol in place of the Apple logo on start up on Panther

    My computer first had the intermittent problem of not activating its own screen upon startup coupled with it lowballing itself on RAM (recognizing only 768 MB when 1GB is installed 512 MB X2). I was able to minimize this problem by shutting down and leaving the computer off AND unplugged from the wall for the greater part of the day but now when I startup I get the aforementioned "NO" symbol in place of the apple logo and alternatively an orange screen with some error message. I want to reload Panther but I am loath to have to do it again. Any way I can revive the computer without reinstalling Panther?

    I did a Google search using { Default Catch! code=300 mac } & got lots of hits. I looked at 3 pages worth but did not get a positive solution to your problem.
    To see if it might be RAM related, take out all but one stick (512MB) & see what happens. If you still have the problem, remove that stick & replace it with a different one.
    You could also try a PMU reset. See Mac PRAM, NVRAM, CUDA/PMU & Battery Tutorial
     Cheers, Tom

Maybe you are looking for

  • Dynamic table - some fields of different rows in one column

    Hey guys, i have the following problem: i habe a itab with some data like: name | id | date | number pete  | 1 | 27.07 |    2 pete  | 1 | 28.07 |    2 pete  | 1 | 30.07 |    2 ann   | 1 | 28.07 |    3 ann   | 2 | 30.07 |    2 the user can define a pe

  • Production Report for consumed Batches

    Hi All; Can anyone pls suggest a standard report where we can see the batches consumed for production/process orders on a given date range i.e the final output should give the  production/process order number with the batches consumed against them. T

  • Add customer fields on item level billing document VF01

    Hi gurus, Does anybody know a user exit (or another way) to add 3 customer fields on a subscreen during creation of a billing document (transaction VF01) ? I'm afraid I need to do a modification for this but maybe there is a better solution. Thanks f

  • Is it bugs on 4.0.219.0 ??

    hey i have a WLC4402 with close to 20 laps.the Laps are broadcasting two wlans one for guest and one for corporate. recently i did an upgrade on the wlc from image 3.2.119.x to 4.0.219.0. now the problem is that the guest wlan cannot get ip address f

  • Neo2 "Error Loading Operating System" solved

    hi, i've been struggling with this frikkin error for a while now and i've finally figured it out, after reading a gazillion posts and not finding an answer i thought i should post mine here for anyone who gets the same problem my setup: msi k8n neo2