Logo in standard text
hi,
I have a logo in .tiff format on my desktop. I wanted to know how to save this in standard text ( SO10). So, that i can include it in my script.
hi,
I am unable to find the solution even sfters earching.
Follwoing is the detailed error. If possible plz help.
Load File
The file contains 2,030 bytes
This is a TIFF file with INTEL byte order
First IFD offset: 1,832
Reading IFD from offset 1,832 Number of Tags 16
ImageWidth: 100
ImageLength: 51
BitsPerSample levels: 3
BitsPerSample - level 1: 8
BitsPerSample - level 2: 8
BitsPerSample - level 3: 8
Compression: 5
Photometric Interpretation: 2
Number of StripOffsets: 2
SamplesPerPixel: 3
RowsPerStrip: 40
Number of StripByteCounts: 2
XResolution: 96 / 1
YResolution: 96 / 1
ResolutionUnit: 2
TIFF format error: No baseline TIFF 6.0 file
Thanks,
Similar Messages
-
How to output a logo stored as standard text to excel using OLE
Hi Experts,
I have a requirement to write a program which creates an excel spreadsheet to download data from SAP. The client would like the spreadsheet formatted with merged cells, background colours, different size fonts and in the top left corner of the spreadsheet to show their logo.
They have similar functionality in another report, however, this requires a template (containing all of the formatting) to be stored on the user's PC. They do not want to have to do this with the new download.
After checking the many postings on this forum I have worked out how to do most of the requirements, but as yet have still not been able to work out how to populate their logo to the spreadsheet. They already have their logo stored as standard text (SO10), so would prefer to use this if possible.
Any advise and/or sample code would ge greatly appreciated.
Thanks
SandraHi Surendra,
We have the same requirement. We want to do some format changes to "Generic FSG Drill Template". I am able to do few changes. But when we run the report, we are able to see PDF, html output. But 'Exce' report comes with blank. Can you help on this. How were you able to see logo in excel file.
Can you send the suggestions if any to my mail ([email protected])
Thanks in advance.
Thanks,
Techie.
Edited by: user1138068 on May 30, 2011 7:04 AM -
How to include the STANDARD TEXT Logo in SMARTFORM???
Hai experts,
Im able to get the standard text logo in SAPSCRIPT used follwing command in text editor.
v_logo is dynamic variable.
/:INCLUDE &V_LOGO& OBJECT TEXT ID ST LANGUAGE EN
But in smartforms im unable to get the Standard text logo used following steps...
in Include text node
A) Text name : &V_LOGO& <
B) Text object : TEXT >
C) Text ID : ST >
D) Text Language : EN >
Why????
What are the further steps needed??
Rewards helpful answer is very useful..
Thanks & rgds,
Muru.P.HI
http://www.sapmaterial.com/smartform_example.html
http://www.sap-press.com/product.cfm?account=&product=H955&shoppingcart=003
Tcode SE78 is used to import graphics into the SAP system. The transaction imports the graphics and stores it
in the BDS (business transaction server) and then it can be displayed in the form.
· To create the graphic node , call the context menu for that node in the tree structure and choose create-
>graphic
· Enter a name (LOGO) for the node and the description (Logo Graphic)
· On the general attributes determine whether a colored or a black and white
· On General Attributes use the fields object - GRPAHIC, id u2013 BMAP and name - &G_LOGO& to identify the
graphic. &G_LOGO& is variable and therefore we can print company code specific logo. Program line preceding
the graphic is required.
Regards
Pavan -
SAPScript: how tu adjust heigh and width of standard text (logo)?
Hi!
how to adjust heigh and width of standard text (logo)?
I do not want to edit the logo, because it is used elsewhere, so I need to adjust heigh and width when using it in a form.
For now stadard text comes over the window. Here is how I use it:
INCLUDE ZHEX-LOGO OBJECT TEXT ID ST
Will reward,
MindaugasHi Mindaugas,
While uploading using RSTXLDMC. You have to maintain your size of the logo.
Go through below mentioned document.
Upload TIFF files to SAPscript texts
Description
The report RSTXLDMC allows a TIFF graphics file to be uploaded from the file system of the R/3 GUI to a standard text in the R/3 word processor SAPscript. (TIFF is a registered trademark of the Aldus Corporation.)
When uploading, the TIFF graphic is converted either into a black and white raster image (parameter type=BMON ) or as a color raster image with a maximum of 256 colors (parameter type=BCOL).
The black and white raster images ( BMON) can be printed using the following printer types:
PCL-5 printer
PostScript printer
Kyocera PRESCRIBE printer
Device type SAPWIN (with SAPlpd 32-bit as of Version 2.41 for Windows NT or Windows 95)
The color raster images (BCOL) can be printed using the following printer types:
PCL-5 printer with color capability (e.g. HP Color LaserJet). Color graphics are not printed properly on monochrome PCL-5 printers (e.g. HP LaserJet 5), because the printer cannot set the color palette as required and does not perform any gray-level conversion.
PostScript printer (color graphics are automatically converted to gray levels on black and white printers using PostScript) Device type SAPWIN (with SAPlpd 32-bit as of Version 2.41 for Windows NT or Windows 95) During TIFF graphic import, the basic set " Baseline TIFF 6.0 " of the TIFF specification 6.0 is supported.
To maintain compatibility with earlier versions of the report RSTXLDMC, it is also possible to convert the TIFF graphic directly into a black and white raster image for a particular printer type when uploading. These are the three printer types PCL-5 (parameter type=PCL ), PostScript (parameter type=POST) and Kyocera PRESCRIBE (parameter type=PRES ). A raster image uploaded in this manner can only be printed using the appropriate printer type.
Besides TIFF raster graphics, direct printer commands in the respective printer language (PCL-5, PostScript or Prescribe) can also be contained in the file which is to be uploaded (printer macros). They are then transferred to the standard text unmodified.
The graphics are output by inserting the standard text into the document which is to be printed, directly or using an INCLUDE command. The printer commands, which for example draw a company logo on the page, are only output if the print request is processed by the printer driver corresponding to the macro type, otherwise they are ignored. Example: A macro of type PCL is contained in a print request. If the request is output to a printer with type HPLJIIID (to which the driver HPL2 is assigned), the macro data is sent to the printer. If the request is printed on a printer of type POSTSCPT (to which the driver POST is assigned), the output of the macro data is suppressed.
In the standard text, the printer commands are inserted between the HEX ... ENDHEX command lines in hex notation. Various report parameters allow the graphic or printer macro to be placed on the page or at the current text position. Note: When the /:HEX command line which precedes the macro appears in the text, a line break is generally made before the graphic is output. The output of the macro therefore begins in the next text line at the left window border of the current page window, as long as a shift to the right is not specified (see below).
If your own printer macros are uploaded and not TIFF files, you must ensure yourself that the normal (text) output of the driver is not impaired when the printer commands are inserted in the output from the uploaded file. The printer drivers pass the data contained in the file to the printer unmodified, therefore without control over the individual actions this triggers on the printer. For example, syntax errors should not be generated by the PostScript commands (type POST), or form feeds should not be contained in the file (unless this was intended) for PCL-5 (type PCL).
Restrictions:
In general, the output of graphics generated via RSTXLDMC from R/3 is not suitable for mass printing (that is, unless you are using the "Graphic resident on printer" feature): the R/3 spooler has to hold significantly more data in its output files. If the graphics occur several times in a spool request, the data also reoccurs. Apart from this, the network is more heavily loaded in sending the increased volume of data to the printer and the printer output is slowed significantly (varies according to printer model) if raster graphics are output as well as the text.
If your graphics reside on your printer during a printing job, the degree of 'correctness' with which they are printed depends on the amount of memory available in your printer. R/3 print drivers are unable to determine whether the amount of memory available is enough! If one of the graphics that you have marked as resident is not displayed, try reloading the graphic and switching off the parameter "Graphic resident on printer".
When printing black and white graphics on PCL-5 printers, image data is compressed in order to greatly reduce the file size.
The output of graphics and macros on PCL-5 printers, PostScript printers and device type SAPWIN (type BMON, BCOL, PCL, POST) is adapted to the page orientation used, that is if landscape is used instead of portrait, the graphic is also turned when output. This is not the case for the PRESCRIBE printers (type BMON, PRES)! With these printers, the graphic is not automatically turned when landscape is used, but appears on the page in the identical position as for portrait. You are therefore recommended not to output raster images when printing in landscape on PRESCRIBE printers.
PRESCRIBE printers do not support the resolutions 200 and 600 dots per inch when printing raster images.
Not all PCL-5 compatible printers support the resolutions 200 and 600 dots per inch when printing raster images.
TIFF graphics with compression type 2 ("CCITT Group 3 1-Dimensional Modified Huffman run length encoding ") can currently not be imported although this is a component of the Baseline TIFF 6.0 specification for monochrome images.
Color TIFF graphics with full color representation (ie. a lot more than 256 colors) are automatically converted into 256 gray levels when uploading with type BCOL.
When TIFF graphics are converted to black and white raster images (type BMON, PCL, POST, PRES) there is no default simulation of gray levels or colors of the original image on the printer (for example, by using different tones of gray). Each pixel of the original image is converted to a white or black pixel on the printer according to its intensity value.
The parameter "Number of TIFF gray levels" does, however, allow a simulation of gray/colour tones of the original image through levels of gray on the printer, when using type PCL, POST or PRES. This parameter is ignored for type BMON.
The conversion of TIFF graphics can be so time-consuming that it is recommendable to execute the report RSTXLDMC in batch processing. Note: in batch, the file is always read from the file system of the application server (ie. not from the file system of the GUI).
The length of an individual text in the text file is limited. When importing TIFF graphics with very large dimensions, especially if more than 2 gray levels are used, a termination can therefore occur when saving the standard text ("EXPORT_TOO_MUCH_DATA"). This restriction can only be avoided by reducing the TIFF graphics. Note: The display of a raster image in Postscript or PRESCRIBE format needs from two to three times as much space as displaying in PCL-5.
When processing very large TIFF images on PostScript printers, a print termination can occur with PS error message "limitcheck". In this case the internal memory of the printer is insufficient to scale the required raster image. This implementation limit cannot be influenced by changing the report parameters when importing.
Requirement
The file which is to be uploaded can contain the following formats/ commands:
Baseline TIFF 6.0 raster image files. The image information of the TIFF file is converted into black and white/color raster images when uploading. Note: As the TIFF format allows a variety of variants, only a basic set of TIFF 6.0 formats is supported here described in the TIFF 6.0 specification as Baseline TIFF 6.0.
PCL : PCL-5, Hewlett Packard Printer Control Language 5 for HP LaserJet 3, 4, 5 series and compatible printers. The data is output by the printer driver HPL2 only.
PRES: Kyocera PRESCRIBE for Kyocera laser printers. The data is output by the printer driver PRES only.
POST: Adobe PostScript or EPS format (encapsulated PostScript ) for PostScript printers. The data is output by the printer driver POST only. In the upload, one of the end-of-file markers (CTRL-D, hex $04) which may be contained in the PostScript file is not transferred.
For PostScript files which contain a bounding box entry (for example, all EPS files) the macro/graphic can be scaled to a size specified by the user. In this case, a small lead text and trailer are generated by the report for the macro data and inserted in the standard text.
Parameters of RSTXLDMC
File name
Path and file name of the file to be uploaded in the file system of the R/3 frontend (dialog processing) or in the file system of the application server (batch processing)
Type
Way which the data contained in the file is to be converted. Possible values are BMON, BCOL, PCL, POST and PRES. With parameter values BMON and BCOL, a TIFF 6.0 file is expected. This is converted into either a black and white raster image (BMON) or a color raster image (BCOL). These raster images are printer-independent and can be printed using various printer types (see above).
With parameter values PCL, POST and PRES, either a TIFF 6.0 file or a file with printer commands in the appropriate printer langauge is expected. If the file is a TIFF file, it is converted into a black and white raster image for the printer type specified in the parameter. The presence of a TIFF file is recognized automatically. If the file is not a TIFF file, the file contents are regarded as the printer macro of the respective type. Data loaded with type PCL, POST or PRES can only be printed on the respective printer type.
Resolution for TIFF raster images
Resolution which should be used when importing a TIFF raster image, in dots per inch (dpi). If an allowed value is entered here, this overrides the resolution information in the TIFF file. The allowed values are:
75 dpi
100 dpi
150 dpi
200 dpi (not for type PRES, for PCL only HP LaserJet 4,5 series)
300 dpi
600 dpi (not for type PRES, for PCL only HP LaserJet 4,5 series)
Changing the resolution affects the size of the graphic on the printer. If a resolution of 300 dpi is stated in the TIFF file and this parameter is set to 75 dpi, the graphic is four times as big when printed as at the outset.
Note: Kyocera PRESCRIBE printers do not support 200 and 600 dpi resolutions.
Note: Not all PCL-5 printers support resolutions 200 and 600 dpi, for example HP LaserJet 3 series does not, but LaserJet 4 and 5 series do.
Graphic Resident on Printer
Normally, graphics that occur more than once in a printing job (a company logo that appears on each page, for example) are sent to the printer repeatedly each time they are needed. In order to avoid this kind of redundancy, you can select this checkbox on the selection screen. The R/3 print driver then stores the graphic in the printer's memory and the printer retrieves the 'resident' graphic memory every time that re-occurs in your job.
Caution: Whether or not the printer correctly reproduces the graphic depends on the amount of memory available in the printer during the printing job! You should avoid using this feature with color graphics since they take up a lot more memory than monochrome graphics.
This parameter can only be used with types "BMON" and "BCOL".
Absolute positioning
Determines whether the macro/graphic is positioned absolutely or is to be output at the current text position. If this checkbox is selected, the graphic is positioned absolutely (parameters "X-position" and "Y-position" are used), if this checkbox is not selected, the graphic is positioned at the current text position (parameters "Reserved height" and "Shift to right" are used)
Absolute X-position
Horizontal position (space from left border) of the macro/graphic, if absolute positioning is required. This is the parameter XPOS of the HEX command.
Absolute Y-position
Vertical position (space from upper border) of the macro/graphic, if absolute positioning is required. This is the parameter YPOS of the HEX command.
Reserve height automatically
If this checkbox is selected, the system automatically inserts the actual height of the graphic during printing into the subsequent "Reserved height" parameter.
Reserved height
If positioned at the current text position, this parameter specifies the horizontal spacing to be reserved for the macro/graphic, which must not be printed with text from the paragraph. This is the parameter HEIGHT of the HEX command.
Shift to right
If positioned at the current text position, this parameter specifies the space between the left border of the macro/graphic and the left border of the page window. If this value is increased, the macro/graphic is shifted to the right. This is the parameter LEFT of the HEX command.
Unit of measurement for positioning
The unit of measurement in which the position values (X,Y, height, shift) are specified. Possible values are CM (centimeters), MM (millimeters), IN (inches), PT (typographic point = 1/72 inch), TW (1/20 point = 1/1440 inch)
Text title
Comment used for the attribute "Title" of the standard text generated as well as as a comment line in the text itself
Line width
Number of columns to be used in the standard text when generating the HEX...ENDHEX command lines. The default value is 132
Text name
Name of the standard text to be generated. If an * character occurs in the name, it is replaced by the value of the parameter "Printer type". For example, if the entry is ZHEX-IMAGE1-* and the printer type = PCL, the text name ZHEX-IMAGE1-PCL is generated. The default value for the name is ZHEX-MACRO-<printer type>, but the standard text can be named as required (take into account customer reserve). Standard texts are client-dependent!
Note: The name of a standard text can be up to 32 characters long !
Text ID
ID of the standard text to be generated. The default value is ST (general standard texts)
Text language
Language key of the standard text to be generated. The default value is the logon language
PostScript scaling
Flag which determines how the macros/graphics of type POST are handled. If set to 'X', the report expects a PostScript comment line in the file
%%BoundingBox llx lly urx ury (e.g. %%BoundingBox -1.5 0 21.4 14.1)
as present, for example, in all EPS files, in which the dimensions and the position of the macro/graphic are specified (if a bounding box comment is not included, 0 0 1 1 is assumed as the default value). This information is then used by the report to insert PostScript commands which scale the macro/graphic to the size specified in the parameters "Width" and "Height" (listed below).
If the flag is set to ' ' (blank), the PostScript file is transferred to the standard text without any additions (any transformations to the coordinate system used by the printer driver must already be contained in the file).
The flag must be set to 'X' for the import of TIFF files for type POST.
Width according to PS scaling
Required width of the macro/graphic if the flag PostScript scaling is set. Can remain at zero for the import of TIFF files, the size is then determined by the resolution of the graphic.
Height according to PS scaling
Required height of the macro/graphic if the flag PostScript scaling is set. Can remain at zero for the import of TIFF files, the size is then determined by the resolution of the graphic.
If you want to scale the PostScript graphic with these parameters, one of the two values, width or height, can be specified with zero. The graphic is then scaled so that the width-to-height ratio remains unchanged and the original graphic is not distorted.
Unit of measurement for PS scaling
Unit of measurement in which the parameters "Width" and "Height" are specified. Possible values are CM (centimeters), MM (millimeters), IN (inches), PT (typographic point = 1/72 inch), TW (1/20 point = 1/1440 inch)
Number of TIFF gray levels
Number of gray tones which are to be used on the printer for displaying the original image. Note: This parameter is only evaluated when using types PCL, POST or PRES!
Possible values are 2,4,9. With the default value 2, each pixel of the original image is converted either to a white or a black pixel on the printer. With the value 4, each pixel of the original image is converted on the printer with 4 pixels, which simulate 4 different gray levels. With the value 9, each pixel of the original image is converted on the printer with 9 pixels which simulate 9 different gray levels.
Note: With values 4 or 9 the resolution of the image is doubled or tripled. The restrictions on the possible resolutions (see previous parameter) then apply for the resulting resolution.
Output
Individual steps of the upload procedure are logged in the report list generated and, if necessary, errors reported. The uploading of TIFF graphics, in particular, is cancelled if there is a variant which is not supported. A message to this effect is then issued. If execution is successful, the report generates a standard text with the key specified in the parameters. If the standard text already exists, a window appears with a warning before the text is overwritten.
Regards,
Ameer Baba. -
How to attach logos in smartforms using standard text??
logos in smartforms using standard text
Hi,
After going into SO10>Menu Bar->Include->Graphics-->Select the logo you have to include that in the standard text. ->save->Activate.
IN the smartform.
Create a Logo Node and fill the information in the right side under general attributes.
Name---Standard text name.
Object
Id.
You can upload the logo using SE78.
Thanks,
Sree. -
hi to all abap Gurus
what is standard text in script ?how to use it > where do we use it ? we know that the use is reusability . how it is reusable . and it is used to support for multiple languages . pls tell in detail . pls dont give any link . points will bre rewarded defintilely for good answers . pls urgent. pls give som esample coding on this .Standard Text is nothing but Global Text.
Suppose you have to display footer/header info. whenever you create a s cript for ur org.your caompany details,logo etx. instead of writing them everytime, if you careta a global text u can include them wherevr u want.
Mainly we are using standard texts to avoid hardcoding in scripts or smartforms.
If you need to include the name of your company and address in the form you
just include a standard text in your form by include statement(script) and by
include text dropdown in forms. If in later part of time your company address
change you need to change the standard text not to touch the form. This is the
way standard text helps us.
in Tcode SO10, u create a text and give a name activate it.
Here is the sample code to send script through E mail..
*& Report ZRICHA_OTF_PDF
report zricha_otf_pdf
message-id zz.
CONSTANTS *
constants : c_x(1) type c value 'X', " For constant value
c_otf(3) type c value 'OTF', " For format
c_u(1) type c value 'U'. " Mail Option
VARIABLES *
data : v_rqident type tsp01-rqident, " For Spool Number
v_rqclient type tsp01-rqclient, " For Client
v_rqo1name type tsp01-rqo1name, " For Object name
v_spool type tsp01-rqident, " For Spool Number
v_spool1 type tsp01-rqident. " For Spool Number
FLAGS *
data : f_spool type c.
INTERNAL TABLES *
Internal table for sending mails
data: it_pdf like tline occurs 10 with header line,
it_xi_pdf like tline occurs 0 with header line,
it_html like solisti1 occurs 0 with header line,
it_xi_temp like bapiqcmime occurs 0 with header line,
it_xi_mime(255) type c occurs 0 with header line.
For sending mail
data: it_objpack like sopcklsti1 occurs 2 with header line.
Internal table for Single List with Column Length 255
data : it_objbin like solisti1 occurs 10 with header line.
Internal table for Single List with Column Length 255
data : it_objtxt like solisti1 occurs 10 with header line.
Internal table for Structure of the API Recipient List
data : it_reclist like somlreci1 occurs 5 with header line.
Structure of the API Recipient List
data: x_doc_chng like sodocchgi1.
Internal table for storing the variants
data : begin of it_variant1 occurs 0,
variant like varid-variant,
end of it_variant1.
Internal table to store variants for the programs
data: it_variant2 like it_variant1 occurs 0 with header line.
Internal table for storing the selected values
data it_return type ddshretval occurs 0 with header line.
Internal table for storing the mail-ids
data : begin of it_mailid occurs 0,
kokrs like csks-kokrs,
kostl like csks-kostl,
datbi like csks-datbi,
telx1 like csks-telx1,
end of it_mailid.
Internal table for storing the mail-ids
data : it_mailid1 like it_mailid occurs 0 with header line.
SELECTION SCREEN *
data : v_char type char50.
selection-screen begin of block b1 with frame title text-001.
select-options: s_email for v_char no intervals
lower case
no-display.
select-options: s_email1 for v_char no intervals
lower case
no-display.
selection-screen end of block b1.
selection-screen begin of block a1 with frame title text-028.
selection-screen begin of line.
parameters : p_c1 as checkbox.
selection-screen comment 3(66) text-026 for field p_c1.
selection-screen end of line.
parameters : p_set like tsp1d-papart matchcode object zh_tsp1d.
selection-screen skip 1.
parameters : p_vara1 type rs38m-selset.
selection-screen end of block a1.
selection-screen begin of block a2 with frame title text-029.
selection-screen begin of line.
parameters : p_c2 as checkbox.
selection-screen comment 3(56) text-027 for field p_c1.
selection-screen end of line.
parameters : p_set1 like tsp1d-papart matchcode object zh_tsp1d.
selection-screen skip 1.
parameters : p_vara2 type rs38m-selset.
selection-screen end of block a2.
AT SELECTION SCREEN ON VALUE REQUEST
at selection-screen on value-request for p_vara1.
For fetching the variants available for the program
perform fetch_variants.
at selection-screen on value-request for p_vara2.
For fetching the variants available for the program
perform fetch_variants1.
AT SELECTION SCREEN
at selection-screen.
For Validation
perform validation.
START OF SELECTION *
start-of-selection.
To get the output data and mail
perform fetch_data.
END OF SELECTION *
end-of-selection.
if f_spool = c_x.
message e000 with 'Spool Not Generated'(060).
endif.
*& Form fetch_data
To get the output data and mail
form fetch_data .
To send the output to spool
perform generate_spool.
endform. " fetch_data
*& Form generate_spool
To send the output to spool
form generate_spool .
data: l_params like pri_params,
l_days(1) type n value 2,
l_count(3) type n value 1,
l_valid type c,
l_valid1 type c,
l_params1 like pri_params.
data: l_device type usr01-spld.
*Get the printer name for the user
select single spld into l_device from usr01 where bname = sy-uname.
if l_device is initial.
l_device = 'LOCL'.
endif.
For report-1
if p_c1 = 'X'.
Setting the print parameters
call function 'GET_PRINT_PARAMETERS'
exporting
destination = l_device
copies = l_count
list_name = sy-uname
list_text = 'SUBMIT ... TO SAP-SPOOL'(008)
release = c_x
new_list_id = c_x
expiration = l_days
LINE_SIZE = 255
LINE_COUNT = 65
layout = p_set
sap_cover_page = space
cover_page = space
receiver = 'SAP*'(010)
department = 'System'(011)
no_dialog = c_x
importing
out_parameters = l_params
valid = l_valid.
if l_valid <> space.
clear v_spool.
Fetch the spool number b4 submit
perform fetch_recent_spool using v_spool.
Submitting the program to spool
submit rkaep000 to sap-spool
using selection-set p_vara1
spool parameters l_params
without spool dynpro
and return.
clear v_spool1.
Fetch the spool number after submit
perform fetch_recent_spool using v_spool1.
if v_spool = v_spool1.
f_spool = c_x.
if p_c2 is initial.
stop.
endif.
else.
Checking the format ( ABAP/OTF)
perform format_check tables s_email.
endif.
else.
message e000 with 'Problem in print settings'(003).
stop.
endif.
endif.
For Report-2
if p_c2 = 'X'.
Setting the print parameters
call function 'GET_PRINT_PARAMETERS'
exporting
destination = l_device
copies = l_count
list_name = sy-uname
list_text = 'SUBMIT ... TO SAP-SPOOL'(008)
release = c_x
new_list_id = c_x
expiration = l_days
LINE_SIZE = 200
LINE_COUNT = 65
layout = p_set1
sap_cover_page = space
cover_page = space
receiver = 'SAP*'(010)
department = 'System'(011)
no_dialog = c_x
importing
out_parameters = l_params1
valid = l_valid1.
if l_valid1 <> space.
clear v_spool.
Fetch the spool number b4 submit
perform fetch_recent_spool using v_spool.
Submitting the program to spool
submit gp3diehxy88snfj0391v7kf9ek7050 to sap-spool
using selection-set p_vara2
spool parameters l_params1
without spool dynpro
and return.
clear v_spool1.
Fetch the spool number after submit
perform fetch_recent_spool using v_spool1.
if v_spool = v_spool1.
message e000 with 'Spool Not Generated'(060).
stop.
endif.
Checking the format ( ABAP/OTF)
perform format_check tables s_email1.
else.
message e000 with 'Problem in print settings'(003).
stop.
endif.
endif.
endform. " generate_spool
*& Form fetch_recent_spool
Fetch the recent spool number generated
form fetch_recent_spool using p_v_spool type tsp01-rqident .
data: l_user like tsp01-rq2name.
clear : v_rqident,
v_rqclient,
v_rqo1name.
l_user = sy-uname.
Get latest Spool No
select single rqident
rqclient
rqo1name
into (v_rqident , v_rqclient , v_rqo1name)
from tsp01
where rqcretime = ( select max( rqcretime )
from tsp01
where rq2name eq l_user
and rqfinal eq '.' ).
if sy-subrc = 0 .
p_v_spool = v_rqident.
endif.
endform. " fetch_recent_spool
*& Form format_check
Checking the format ( ABAP/OTF)
form format_check tables p_s_email structure s_email.
data : l_objtype like rststype-type.
call function 'RSTS_GET_ATTRIBUTES'
exporting
authority = 'SP01'(019)
client = v_rqclient
name = v_rqo1name
part = 1
importing
objtype = l_objtype
exceptions
fb_error = 1
fb_rsts_other = 2
no_object = 3
no_permission = 4.
if sy-subrc <> 0.
message id sy-msgid type sy-msgty number sy-msgno
with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
endif.
if l_objtype(3) = c_otf.
Convert OTF Spool to PDF
perform convert_otf2pdf tables p_s_email.
else.
Convert ABAP Spool to PDF
perform convert_abap2pdf tables p_s_email.
endif.
endform. " format_check
*& Form convert_otf2pdf
Convert OTF Spool to PDF
form convert_otf2pdf tables p_p_s_email structure s_email .
clear it_pdf.
refresh it_pdf.
data : l_bytecount type i.
Fn. to get the PDF format
call function 'CONVERT_OTFSPOOLJOB_2_PDF'
exporting
src_spoolid = v_rqident
no_dialog = 'X'
importing
pdf_bytecount = l_bytecount
tables
pdf = it_pdf
exceptions
err_no_otf_spooljob = 1
err_no_spooljob = 2
err_no_permission = 3
err_conv_not_possible = 4
err_bad_dstdevice = 5
user_cancelled = 6
err_spoolerror = 7
err_temseerror = 8
err_btcjob_open_failed = 9
err_btcjob_submit_failed = 10
err_btcjob_close_failed = 11.
if sy-subrc = 0.
For page format
perform page_format tables p_p_s_email.
else.
message id sy-msgid type sy-msgty number sy-msgno
with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
endif.
endform. " convert_otf2pdf
*& Form convert_abap2pdf
Convert ABAP Spool to PDF
form convert_abap2pdf tables p_p_s_email structure s_email.
clear it_pdf.
refresh it_pdf.
data : l_bytecount type i.
Fn. to convert to PDF format
call function 'CONVERT_ABAPSPOOLJOB_2_PDF'
exporting
src_spoolid = v_rqident
no_dialog = 'X'
importing
pdf_bytecount = l_bytecount
tables
pdf = it_pdf
exceptions
err_no_abap_spooljob = 1
err_no_spooljob = 2
err_no_permission = 3
err_conv_not_possible = 4
err_bad_destdevice = 5
user_cancelled = 6
err_spoolerror = 7
err_temseerror = 8
err_btcjob_open_failed = 9
err_btcjob_submit_failed = 10
err_btcjob_close_failed = 11.
if sy-subrc = 0.
For page formatting
perform page_format tables p_p_s_email.
else.
message id sy-msgid type sy-msgty number sy-msgno
with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
endif.
endform. " convert_abap2pdf
*& Form send_mail
For sending mail
form send_mail tables mail structure s_email .
Structures and internal tables for the send data
data: objpack like sopcklsti1 occurs 2 with header line,
objhead like solisti1 occurs 1 with header line,
objbin like solisti1 occurs 0 with header line,
objtxt like solisti1 occurs 10 with header line,
reclist like somlreci1 occurs 5 with header line.
data: doc_chng like sodocchgi1,
tab_lines like sy-tabix.
Data for the status output after sending
data: sent_to_all like sonv-flag.
clear: it_reclist, it_reclist[],
it_objtxt , it_objtxt[],
it_objpack, it_objpack[],
it_objbin , it_objbin[],x_doc_chng.
loop at it_html.
objbin-line = it_html-line.
append objbin.
clear objbin.
endloop.
Create the document which is to be sent
doc_chng-obj_name = 'List'(012).
doc_chng-obj_descr = 'Mail'(013).
Heading
objtxt-line = 'Mail with pdf attachment'(014).
append objtxt.
clear objtxt.
Size
describe table objtxt lines tab_lines.
read table objtxt index tab_lines.
doc_chng-doc_size = ( tab_lines - 1 ) * 255 + strlen( objtxt ).
Fill the fields of the packing_list for the main document:
clear objpack-transf_bin.
The document needs no header (head_num = 0)
objpack-head_start = 1.
objpack-head_num = 0.
Body
objpack-body_start = 1.
objpack-body_num = tab_lines.
objpack-doc_type = 'RAW'(015).
append objpack.
Create the attachment (the list itself)
describe table objbin lines tab_lines.
Fill the fields of the packing_list for the attachment:
objpack-transf_bin = 'X'.
Header
objpack-head_start = 1.
objpack-head_num = 0.
Body
objpack-body_start = 1.
objpack-body_num = tab_lines.
objpack-doc_type = 'PDF'(016).
objpack-obj_name = 'Attachment'(017).
objpack-obj_descr = 'Mail with pdf Attachment'(018).
objpack-doc_size = tab_lines * 255.
append objpack.
*-Fill the mail recipient list
loop at mail.
reclist-receiver = mail-low.
reclist-rec_type = c_u.
append reclist.
clear: reclist,
mail.
endloop.
*-Send the document by calling the SAPoffice API1 module for sending
*-documents with attachments
call function 'SO_NEW_DOCUMENT_ATT_SEND_API1'
exporting
document_data = doc_chng
put_in_outbox = c_x
commit_work = c_x
importing
sent_to_all = sent_to_all
tables
packing_list = objpack
object_header = objhead
contents_bin = objbin
contents_txt = objtxt
receivers = reclist
exceptions
too_many_receivers = 1
document_not_sent = 2
operation_no_authorization = 4
others = 99.
case sy-subrc .
when 0.
message i000 with 'Mail has been sent successfully'(006).
when others.
message e000 with 'Problem in sending the mail'(023).
endcase.
endform. " send_mail
*& Form page_format
For page foramtting
form page_format tables email structure s_email .
data : l_lines type i,
l_temp(500) type c,
l_offset type p,
l_lineslen(2) type p,
l_mimelen(2) type p,
l_tabix like sy-tabix.
clear : it_xi_pdf,
it_xi_temp.
refresh : it_xi_pdf,
it_xi_temp.
it_xi_pdf[] = it_pdf[].
Reformat the line to 255 characters wide (code from SAP)
clear: l_temp, l_offset, it_xi_temp.
describe table it_xi_pdf lines l_lines.
describe field it_xi_pdf length l_lineslen in character mode.
describe field it_xi_temp length l_mimelen in character mode.
loop at it_xi_pdf.
l_tabix = sy-tabix.
move it_xi_pdf to l_temp+l_offset.
if l_tabix = l_lines.
l_lineslen = strlen( it_xi_pdf ).
endif.
l_offset = l_offset + l_lineslen.
if l_offset ge l_mimelen.
clear it_xi_temp.
it_xi_temp = l_temp(l_mimelen).
append it_xi_temp.
shift l_temp by l_mimelen places.
l_offset = l_offset - l_mimelen.
endif.
if l_tabix = l_lines.
if l_offset gt 0.
clear it_xi_temp.
it_xi_temp = l_temp(l_offset).
append it_xi_temp.
endif.
endif.
endloop.
clear : it_xi_mime,
it_xi_mime[].
loop at it_xi_temp.
it_xi_mime(255) = it_xi_temp-line.
append it_xi_mime.
clear it_xi_mime.
endloop.
Final Data
clear : it_html,
it_html[].
it_html[] = it_xi_mime[].
For sending mail
perform send_mail tables email.
endform. " page_format
*& Form fetch_variants
For fetching the variants available for the program
form fetch_variants .
data : l_program like rs38m-programm value 'RKAEP000',
l_vara1 type dfies-fieldname value 'P_VARA1'.
clear : it_variant1,
it_variant1[].
Get variants
perform get_variants tables it_variant1
using l_program.
F4 Help
if not it_variant1[] is initial.
perform get_f4_help tables it_variant1
using l_vara1
changing p_vara1.
else.
message e000 with 'No variants available for report1'(054).
endif.
endform. " fetch_variants
*& Form validation
For Validation
form validation .
data : l_pro1 like rs38m-programm value 'RKAEP000',
l_pro2 like rs38m-programm value 'GP3DIEHXY88SNFJ0391V7KF9EK7050',
l_c1,
l_c2.
If both check-box are unchecked
if p_c1 is initial
and p_c2 is initial.
message e000 with 'Check any one check-box'(049).
endif.
If checked without varaint
if not p_c1 is initial and p_vara1 is initial.
message e000 with 'Please give any one of the variant for report1'(055).
endif.
If checked without varaint
if not p_c2 is initial and p_vara2 is initial.
message e000 with 'Please give any one of the variant for report2'(061).
endif.
Reading the variant and fetching the mail-ids
if p_c1 = c_x.
l_c1 = '1'.
clear : s_email,
s_email[].
perform read_variants tables it_mailid
s_email
using p_vara1
l_pro1
l_c1.
if s_email[] is initial.
message e000 with 'No Id available for given Cost report1'(066).
else.
sort s_email by low.
delete adjacent duplicates from s_email comparing low.
endif.
endif.
Reading the variant and fetching the mail-ids
if p_c2 = c_x.
clear : s_email1,
s_email1[].
l_c2 = '2'.
perform read_variants tables it_mailid1
s_email1
using p_vara2
l_pro2
l_c2.
if s_email1[] is initial.
message e000 with 'No Id available for given Cost report2'(067).
else.
sort s_email1 by low.
delete adjacent duplicates from s_email1 comparing low.
endif.
endif.
endform. " validation
*& Form GET_VARIANTS
Fetching Variants
form get_variants tables p_it_variant structure it_variant1
using p_v_program type rs38m-programm.
select variant
from varid
into table p_it_variant
where report = p_v_program.
endform. " GET_VARIANTS
*& Form GET_F4_HELP
text
form get_f4_help tables p_it_variant1 structure it_variant1
using p_l_vara1 like dfies-fieldname
changing p_p_vara like p_vara1.
Fn. for Pop-Up
call function 'F4IF_INT_TABLE_VALUE_REQUEST'
exporting
retfield = p_l_vara1
value_org = 'S'
display = ' '
tables
value_tab = p_it_variant1
return_tab = it_return
exceptions
parameter_error = 1
no_values_found = 2
others = 3.
if sy-subrc = 0.
p_p_vara = it_return-fieldval.
else.
message id sy-msgid type sy-msgty number sy-msgno
with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
endif.
endform. " GET_F4_HELP
*& Form FETCH_VARIANTS1
text
form fetch_variants1 .
data : v_program1 like rs38m-programm value 'GP3DIEHXY88SNFJ0391V7KF9EK7050',
l_vara2 type dfies-fieldname value 'P_VARA2'.
clear : it_variant2,
it_variant2[].
Get Variants
perform get_variants tables it_variant2
using v_program1.
F4 Help
if not it_variant2[] is initial.
perform get_f4_help tables it_variant2
using l_vara2
changing p_vara2.
else.
message e000 with 'No variants available for report2'(050).
endif.
endform. " FETCH_VARIANTS1
*& Form read_variants
Reading the variant and fetching the mail-ids
form read_variants tables p_it_mailid structure it_mailid
p_s_email structure s_email
using p_p_vara1 like p_vara1
p_l_pro1 like rs38m-programm
p_l_c1 type c.
data : l_temp(44),
it_valutab like rsparams occurs 0 with header line.
ranges : r_cocen for csks-kostl.
Function Module to get the variant contents
call function 'RS_VARIANT_CONTENTS'
exporting
report = p_l_pro1
variant = p_p_vara1
tables
valutab = it_valutab
exceptions
variant_non_existent = 1
variant_obsolete = 2
others = 3.
if sy-subrc <> 0.
message id sy-msgid type sy-msgty number sy-msgno
with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
endif.
clear : r_cocen,
r_cocen[].
loop at it_valutab where selname = 'KOSTL'
or selname = '_C-CCTR'.
Getting the range of cost centers
if it_valutab-option = 'BT'.
r_cocen-low = it_valutab-low.
For Conversion Routine
perform conversion using r_cocen-low.
r_cocen-high = it_valutab-high.
For Conversion Routine
perform conversion using r_cocen-high.
r_cocen-option = 'BT'.
r_cocen-sign = 'I'.
append r_cocen.
clear r_cocen.
endif.
Getting the single cost centers
if it_valutab-option = 'EQ'.
r_cocen-low = it_valutab-low.
For Conversion Routine
perform conversion using r_cocen-low.
r_cocen-option = 'EQ'.
r_cocen-sign = 'I'.
append r_cocen.
clear r_cocen.
endif.
endloop.
If no cost centers
if not r_cocen[] is initial.
select kokrs
kostl
datbi
telx1
from csks
into table p_it_mailid
where kostl in r_cocen.
if p_it_mailid[] is initial.
if p_l_c1 = '1'.
message e000 with 'No IDs available for report1'(059).
elseif p_l_c1 = '2'.
message e000 with 'No IDs available for report2'(062).
endif.
endif.
Deleting the blank entries
delete p_it_mailid where telx1 = space.
clear l_temp.
read table p_it_mailid index 1.
l_temp = p_it_mailid-telx1.
data : l_check.
loop at p_it_mailid where telx1 <> l_temp.
l_check = c_x.
endloop.
For checking the unique ids
if l_check = c_x.
if p_l_c1 = '1'.
message e000 with 'No unique mail-ids for report1'(058).
elseif p_l_c1 = '2'.
message e000 with 'No unique mail-ids for report2'(065).
endif.
endif.
Populating the IDs for the cost centers
loop at p_it_mailid.
set locale language sy-langu.
translate p_it_mailid-telx1 to lower case.
set locale language space .
concatenate p_it_mailid-telx1 '@allergan.com' into l_temp.
p_s_email-low = l_temp.
p_s_email-sign = 'I'.
p_s_email-option = 'EQ'.
append p_s_email.
clear p_s_email.
endloop.
else.
if p_l_c1 = '1'.
message e000 with 'No Cost Center Available for report1'(057).
elseif p_l_c1 = '2'.
message e000 with 'No Cost Center Available for report2'(063).
endif.
endif.
endform. " read_variants
*& Form CONVERSION
For Conversion Routine
form conversion using p_it_valutab_low type c.
call function 'CONVERSION_EXIT_ALPHA_INPUT'
exporting
input = p_it_valutab_low
importing
output = p_it_valutab_low.
endform. " CONVERSION
chk this one to send script to pdf
http://www.sapdevelopment.co.uk/reporting/rep_spooltopdf.htm
plzz refer to this link..it will solve ur problem
Re: Sending a PDF document as an attachment
sending the mail with PDF attachment
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/62ae7fcd-0b01-0010-3e9d-a54f26944450
Regards
Sree -
URGENT :Similar name of standard text in different systems
Scenario is:
We have more than 3 production system as usual and want to merge in one for future convenience.(Sending the data through interface) now <u>name of the Standard text </u> for the SAP Script say <b>Zabc</b> in one production system is also available in other Production system with same name <b>Zabc</b> but different text in it and used for different SAP Script. if we are moving the Standard text into one production system then we r facing problem because of the similar name of Standard text but it is used with different text init for different SAP Scripts
Can any one help me in this..
Regards,
NupurI have question in SAP Script ..
I have created one SAP script in original Language EN addition with Key Language HU (Hungary), means when user want to see the SAP Script in EN then all the content will come in EN and when they want see in Hungary they will get in Hungary. I did this part .but the logo part is troubling me .
I have uploaded successfully the Logo in Original language EN and test it , it's working well. Now when I am opening the Same SAP script in HU language then I am not able to see the Logo Uploaded .....means when i am going to Logo window for Hungary SAP Script no Logo unpadded and Insert Logo option is Grayed (Inactive)
Could you help me out Please?
If I run the test case, I am not able to see LOGO for the SAP script in Key language HU.WHY?
Colud u pls teel me the path How to post a new queires , I forget how i did for the first time ...I know this is a very stupit question but pls... do reply me back.. -
Hello,
I need to add a Terms and Conditions page in a SapScript. This page needs to be formatted to be written in two columns.
I created the SO10 standard text for the terms and conditions page, but when I try to add the columns button to the text editor, this option is inactive.
How can I split the text into two columns?
Thanks!Hi,
Splitting the text into two columns in the Standard Text is not possible. It is possible only in the layout windows.
I got the same requirement couple of weeks back. Finally what I did is, I just uploaded the word document (followed the same process what we do for uploading logo/bmp/image files etc) and then displayed in the script. If you like this option, you can try with this.In both of our cases, there is no necessary to create the Standard Text itself.
Hope this helps.
Thanks,
Srinivasa -
What is the tcode to created standard text to include in sap script
HI
what is the tcode to created standard text
i want to include standary text in sap script
regads
AroraHi ,
If you want to upload a logo , then u can use program RSTXLDMC if it is in .TIFF format or if you want to upload a grphic which is in .bmp then u can use SE78 or directly u can use SO10 also.
SAPScript Transaction codes
SE71 - Form painter
SE72 - Style maintenance
SE78 - SapScript Graphics Management
SO10 - Create standard text module
Reading Text in SAPScripts
If you only need to output the text, you don't need to used READ_TEXT like in an ABAP program,
just use the INCLUDE command in SAPScript.
It will read the text and output it to your form.
The Syntax is like this:
/: INCLUDE &T166K-TXNAM& OBJECT &T166K-TDOBJECT& ID &T166K-TDID& LANGUAGE &EKKO-SPRAS&
Check the following link:
http://sap-img.com/sapscripts.htm
Regards,
Raghav -
SAPScript - moving standard texts inside a window
Hi!
I have a standard text (logo image) in Header window and I would like to move it right, how to do it? Should I create a separate window just for logo or it is ok to move it inside Header window?
Seems so that by default it is aligned left.
Will reward,
Mindaugas.Hi,
If the window is only having the LOGO,
Then the best approach will be to move the window iteself..
Goto the page where the window is used..
Double click on window name and it will be hilighted..
Now, see at the down you will be able to see Left Margin and Right margin..
Make changes to Left Margin, save, activate and and goto-->utilities->test print..
Adjust the window accordingly by changing the margin value and test print..
And..
No need to change anything in the window elements.
It should only have
/: INCLUDE .....
Thanks and Best Regards,
Vikas Bittera. -
Hi,
II have to retrive the material description from MAKT and then should append with some XXX which will contain a logo in the SO10...
have to insert this logo into the smartform which is stored as a Standard text.
can any one help .... Thanks in advance.Hi,
While adding node in smartforms take care of following things
1) Select Text type as 'Include text'
2) text Name = Name of text in which image is stored
3) Text Object = GRAPHICS
4) Text ID = BMON (Black and White) / BCOL (Color Image)
5) LANGUAGE = Language in which text exist.
Regards,
Omkar. -
Hello
I have a standard text saved in local object how can i copy or save it in package and how to transport it
points for sureHi,
You need to attach the Logo ( which is in the form of standard text ) to a transport request using the program RSTXTRAN.
for that your Tr. request should be a correction.
You need to goto SE10 and select the TR number and goto menu ->request/task->change type and change the type as correction.
Then you execute the program RSTXTRAN and give the details of the standard text. Then only your standard text will get attached to the request.
Then you need to transport this TR.
<b>Please reward if helps.</b>
Thanks,
Nagendra -
How to call Subroutines,Standard Text & using Internal Table in SmartForm
Hi all,
need help in the following areas.Its very urgent!
1.How to CAll Subroutines in Smart Forms
2.How to CAll Standard Text in Smart Forms
Situation:
We have an Internal Table T_SALES with all the data which am going to display in the smartform,How to retrive data from an internal table in Smart forms
Any Help in this direction would be highly appreciated.
Regards
RamuHi,
When you are using quantity or currency fields, you have to mentiong the reference fileds in a tab called CURRENCY/QUANTITY FILEDS in the GLOBAL DATA node.
Specifying a Currency or Quantity Reference
Use
In the ABAP Dictionary, you can assign a currency or quantity field to a table field. In the output of these fields, the system can then insert the relevant currency or unit:
· If the value field is in the same table as the corresponding currency or quantity field, the system recognizes the reference automatically, and formats the value field according to the currency or unit in the assigned field.
· If the value field is in a different table from the currency or quantity field, the system cannot recognize this reference automatically.
In the second case, you must indicate this reference to the system in the form, to ensure that the value field is formatted correctly.
Procedure
You want to assign a currency or quantity field in one table (for example, CURTAB) to a value field in another table (for example, VALTAB).
1. Create the reference to the currency field by entering the following values:
- Field Name: VALTAB-VALUE, if this is the value field of VALTAB that you want to display.
- Reference Field: CURTAB-CURRENCY, which is the currency field of CURTAB.
2. Under Data Type, specify whether the data type is a currency or quantity.
Result
In the output of the PDF-based print form, the system formats the value field VALTAB-VALUE according to the assigned value in the currency or quantity field of the global variable CURTAB-CURRENCY.
Thanks and Regards,
Bharat Kumar Reddy.V
Message was Added by: Bharat Reddy V
Message was Added by: Bharat Reddy V -
If condition in standard text in so10
Hi,
Im using a standard text where ive written an IF condition but its not working.Im calling that text in my program using READ_TEXT, TEXT_CONTROL_REPLACE and TEXT_SYMBOL_REPLACE function modules.Im not using sapscript or smartform.All my dynamic variables are working fine but for my IF condition what is happening is IF statement is also true and ELSEIF is also true.The statement under if is also getting printed and statement under elseif is also getting printed.
Could anyone help please.
Regards,
Nidhi.Standard text " if conditions " dont work other than scripts and smartforms.
to my surprise, if conditions have not worked even when I used them as includes in ADOBE forms.
Please handle the conditions in your program itself.
<< Moderator message - Point begging removed >>
Edited by: Rob Burbank on Sep 30, 2011 2:49 PM -
Call Standard Text by report replacing the variables with their values
Hi,
I have a requirement to call a standard text from a report.
Following is the text present in standard text.
&PTXT1-ENAME& will attend for interview
on &MEMOACT-PLDAT& at &MEMOACT-PLTIM&.
I am doing it by using READ_TEXT. But READ_TEXT reads the entire text as it is.
Is there any way I could retrieve the standard texts with &PTXT1-ENAME& replaced by the value of PTXT1-ENAME in report. And similarly &MEMOACT-PLDAT& replcaed with its actual value.
Any pointers in this regard would be helpful.
Points will be awarded.
Regards,
Mayank AgarwalHi,
In the Text
&PTXT1-ENAME& will attend for interview
on &MEMOACT-PLDAT& at &MEMOACT-PLTIM&.
do not use the * as a paragrapgh , use /: as the paragraph
Regards
Sudheer
Maybe you are looking for
-
Cannot stream to iTunes and join wireless internet at the same time
I have a home network with an Airport Extreme base station, and Airport Express connected to my home stereo and to my existing wireless network in client mode. I receive internet via a wireless signal throughout my apartment building. My laptop recei
-
Hi All, We are facing issue in receiver SFTP scenario, sender is a simple flat file and receiver is SFTP. In the receiver SFTP channel we are getting below error: Delivery of the message to the application using connection SFTP_http://sap.com/xi/XI/S
-
So, in the end, is mixing JSTL with JSF ok or not?
At first, when I began learning JSF, I was taught not to mix JSTL into JSF because it's very hard to know how will be behave. Then, I learned that in order to avoid the confusion completely, it was best not to use any JSTL or even better use Facelets
-
Personal Data and Address for Country Grouping 99 - error on ESS
Hello All, I have configured personal data and address infotypes in ESS for the country grouping 99. I have done the following config 1. Assign Screen Structure to Infotype Versions 2. Define Active Subtypes and Use Case 3. Define Country-Specific Ap
-
Hi I'm getting the following error when I reboot my computer and have to manually hold down the restart key. Does anyone know what this means? Here is the error: panic(cpu 2 caller 0x001A4A55): Unresolved kernel trap (CPU 2, Type 14=page fault), regi