Logo in varible screen in WAD
Hi All:
Is it possible to have a logo in the variable screen in WAD, which is the right class and method which should be changed.
Thanks a lot in advance.
Tina
Tina ,
The variable screen is not available for customization , unless you make an SAP Object modification in the base class.
What you could do is :
1. Have a HTML Page to take in the entries with the text boxes for the variable
2. Evaluate really how important the logo is to the report. ( I am not sure if anyone would take a print out of the variable entry screen )
Option 1 involves a lot of javascript to fetch variable values and additional queries and in some cases modifying the help service class to acheive what you need.
Hope this helps
Arun Varadarajan
P.S I know I have ended up telling you that what you want cannot be achieved , but assigning points is a way of saying thank you in SDN!!!!
Similar Messages
-
after trying to update my iphone 5 to ios 7 via itunes my phone will not work at all, all i have is an itunes logo and cable logo on the screen HELP!!!!
you'll want to restore it using itunes and recovery mode
http://support.apple.com/kb/ht1808 -
My iphone5 was accidentally disconnected while updating OS8.2 in my MacBook Pro and now it's stuck with an apple logo on its screen and won't turn on or off. What should I do?
Connect to iTunes and restore. If you have difficulty, you may have to put the device into Recovery Mode. See the instructions in this support document. If you can't update or restore your iPhone, iPad, or iPod touch - Apple Support
-
i tried to restore an i-phone to factory settings and now i have error code 3014 and i have the usb cable and i tunes logo on my screen and it wont let me power of i have phone connected already to i-tunes
There is some troubleshooting for that error message on this page : http://support.apple.com/kb/TS3694
This error occurs when iTunes is unable to reach gs.apple.com in a timely fashion. Follow the steps below in Unable to contact the iOS software update server gs.apple.com. -
My ipod nano 6th gen doesn't start. When I plug it, only blink the apple logo on the screen. I try to reset it holding by 8 seconds start button and volume down and doesn't work. My Ipod doesn't have any shock or water damage. How can I do?
Hey rulosrojos,
The article linked below details a number of troubleshooting steps that can help restore functionality to your iPod nano.
iPod nano (6th generation): Hardware troubleshooting
https://support.apple.com/en-us/TS3474
Sincerely,
Allen -
iPod nano 3rd gen. Apple logo remains on screen and iTunes doesn't recognise it's plugged in, I can't even turn it off. I've tried to get to disc menu but when I hold the 'menu and select button' it reboots and then doesn't recognise the select and play button to show the tick. I'm helpless.
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
Problem with Variable screen in WAD
Hi ,
I have a problem with variable screen in WAD , in the varable seen it is displaying only Key , it is not giving any description , but in BEX is is displaying both Key and Description , can any only have an idea why is this happening . this is occuring only for one variable , rest are working fine .
Thanks,
AbrahamHi Abraham,
thsi could be a problem from the specisic setting of the infocube. Please check the BEx Settings from the infocube. You can find them by the following steps:
- search for the infocube
- doubleclick on the infocube
- choose an specific infoobjekt
- right mousebutton and click "specific dataprovider settings"
- check if the right entries are set
Hope this will help.
André -
How to design selection screen with WAD 3.x Web Items
Hi Guruu2019s,
I have a requirement where I need to design a selection screen by using WAD 3.x web items. In the selection screen we have to include the Query Description - in the left corner of the selection screen, Name of Sales Person u2013 left side of the screen, Date from and Date to u2013 right side of the selection screen, User ID and User Name u2013 on the top right of the selection screen etc., after this on the bottom of the selection screen I have to include the pushbutton RUN REPORT.
After filling all the above parameters and click on Run Report it has to trigger another URL link which contains consolidated Sales CRM Report.
Could any one suggest me and provide me the idea on developing the selection screen with WAD 3.x Web items and is there any other interface to trigger the other URL link when I click on Run Report.
Regards
Venkatno replies. Closing the incident
-
I am using iphone 3gs since last 4 days. Till yesterday night it was working fine and i have connected this phone for charging . Morning there was apple logo in the screen and every 1mte (approx) it is blinking. I could not restart the phone.Plz help . I have tried to reset even by pressing sleep and home button but it could not help. Please suggest. Still i have connected for charging .
Sounds like you have corrupt backup data, if this occurs from one phone to another. Try restoring the phone as a new device, without a backup. Try using for a day before installing any other apps, etc. See if that improves the battery life. Then try syncing back applications a couple at a time. Something seems to be locking in the processor which is draining the battery.
Do you live in an area where there are Apple Stores? If so, try making an appointment with the Genius Bar to have the device checked out. -
I have reset my iphone 5c and now it has the apple logo on the screen. Nothing is happening, apart from the screen going off for a few seconds, only to go back to black screen and white apple log. I have tried holding home and lock buttons for 10 seconds, but to no avail. I did a reset on settings as the IOS 8 was just slowing down my phone horrendously. How do i sort this please ?
Hi MartinH78,
If your iPhone isn't responding or won't start up past the Apple logo, you may find the troubleshooting steps outlined in the following article helpful:
iOS: Not responding or does not turn on
Regards,
- Brenden -
I tried to do the 7.0.4 update on my iphone 5 and now it has the itunes logo stuck on screen and when I plug into itunes it states my phone needs to be restored. I don't want to lose all my stuff.... ideas?
here is solution
http://support.apple.com/kb/HT1808
You have already lost it at this stage
but you have a backup of course -
my ipod touch is showing a usb pointing to the itunes logo on the screen and nothing else. It won't switch on beyond that. Please help!
Sounds like your iPod is in restore mode. Connect it to iTunes. iTunes will pop a little message up saying that your iPod is in restore mode and asking you if you want to restore it, click yes. Your iPod will restore to factory settings and you will be given the chance to restore from a backup. You can do this or set it up as a new iPod.
Here is Apple's page on restoring your iPod.
http://support.apple.com/kb/ht1414
Hope that helps. -
My iphone 5 died so I plugged it back in to charge and it will not turn on. It will turn to the screen with the apple logo and black screen then turn off again. Any suggestions?
I leave it charging until it gets back to full, usually it turns on after a little bit of time after plugging it in, but all its doing is going to the apple logo screen and going blank again.
-
My ipad 1 isnt working it is just showing the apple logo on the screen can anyone help me?
my ipad 1 isnt working it is just showing the apple logo on the screen can anyone help me?
If you can help me facetime me at [email protected] or msg me.It would help to know whether it ever did work, or is this a new iPad for you? If new, you need to connect it to a Mac/PC that's running iTunes in order to register and initialize it. If it used to work, try doing a reset.
-
i bought a iphone 3g from market yesterday and the phone is showing a usb an also itunes logo on the screen, the ive tryed restore and update, but once this has finished it gives me erra code (1015) can anybody help me plz
Error 1015: This error is typically caused by attempts to downgrade the iPhone, iPad, or iPod touch's software. This can occur when you attempt to restore using an older .ipsw file. Downgrading to a previous version is not supported. To resolve this issue, attempt to restore with the latest iPhone, iPad, or iPod touch software available from Apple. This error can also occur when an unauthorized modification of the iOS has occurred and you are now trying to restore to an authorized, default state.
http://support.apple.com/kb/TS3694#error1015.
Maybe you are looking for
-
Cannot open itunes receive message Error 7 (Windows 127)
I attempt to open itunes but receive the message Error 7 (Windows 127) I am running Windows 7 Home Premium. Have been running Itunes for several years using various iphones, at present on 4S and an Ipad 4. I have several times uninstalled Itunes, and
-
Converting a crystal report to pdf and then opening the pdf automatically
I am successfully exporting a crystal report to a pdf file using code in vb.net 2008 in a windows application. The crystal report is open in the viewer control and the user presses a button to export it. I create a variable with the report name and
-
How to print a Proe .drw ( Vector Graphic ) file to a printer.
I am having a drawing model (proe .drw file). I want to print this file to a .tif file using java.The print driver is "Informatik Image Driver 3.20". .Can some one help me out with the steps involved in this. I understand .drw file are of type Vector
-
Purpose of certificate in the Operation manager store - ADCS server.
Hello, I do have win 2003 ADCS server. When I do mmc snap in for local computer, I can see one of the certificate under operation manager expiring soon. Can anyone please tell me the purpose of operation manager store - ADCS server. Thanks
-
Where is the log of communication channel
I use a file adapter to write files into a directory, but I found some files are disappear. I use SXMB_MONI to check, there is no error. And I use runtime workbench to check the log, it only shows the log in 1hr. Could I see the entire file adapter l