LOGO is printing in REVERSE while PRINTOUT

Hi ABAPER'S.......
The below process is in SAPSCRIPTS.I copied MEDRUCK to ZMEDRUCK.
I am getting a small disorder while taking the print out ...
In <b>ME22N</b> i'm getting the LOGO in correct fashion..But the problem is that while taking the printout i'm getting every thing in correct order except the LOGO..
The LOGO is printing in REVERSE ORDER.
Can any one suggest me abt this .
Every one will be awarded points who respond.Points r sure.
Thanks in Advance.
Regards,
Sudheer.

Hi
If it is showing correctly in the print preview of ME21N and printing the logo wrongly in the printout
then check the Printer settings
try to heck the same printout in another printer and see
Reward points for useful Answers
Regards
Anji

Similar Messages

PROBLEM WITH LOGO PRINTING IN REVERSE DIRECTION

HI,
When Ever I take the print out of the checks, The company logo is getting printed in reverse direction, but if i look at the print preview , it is showing up correctly. even if i take the print out of just the logo from SE78, the logo is getting printed out in reverse direction...I think it is the problem with the printer settings, but i m not sure. Can any one please help me out with this issue,
Regards,
Raghu

Hi,
Are you trying to get this print directly from the backend or some frondend application triggers your form? As I also faced same problem many a times but then observed that when smartform was triggered from frontend, logo was always in its right position.
Regards,
Shikha

Abap report print logo or image in reverse order

Dear all,
Currently we are using sap enterprise 4.7 . in our abap report sap report and data is OK but log is print in reverse in HP LaserJet p255d and HP LaserJet p250 series PCL 6.
But same report in hp leaser jet 1320 run ok in SWIN driver.
I change the driverson output dvice in sap but result is same how can I update or install print driver that can be I see in SPAD --> output device --> device type
thanks
Shahid

Hi,
please check this [LINK|http://sap.ittoolbox.com/groups/technical-functional/sap-basis/how-to-install-new-printer-drivers-in-sap-1262490?cv=expanded] and SAP Note : 8928
Regards,
Srinu

Logo not printing in classical report

hello friends,
i have displayed logo in classical report but while taking printout its not showing any image in printout.
pls suggest.
Regards,
Sunny

Hi Sunny,
Printing logo is not possible in classical using write statments, but it is possible using ALV grid.
Still you can refer to these links:-
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/9ba5061c-0901-0010-2da8-9a0ac9a313c4
Re: Logo in Report
Hope this solves your problem.
Thanks & Regards,
Tarun Gambhir

Sapscript Logo upside down with reverse color

Hello experts,
In ECC6, my colleage and I tested a sapscript logo on the same black&white printer. However, the printouts came out differently. My laptop produced a correct logo, but my colleage's one produced an upside down logo with reverse color. This is the statement we used in the form. Do you know if we miss something to check for? Please help!
INCLUDE ZHEX-MACRO-BELLLOGO2C OBJECT TEXT ID ST
Best regards,
Chuong

Hi ,
First go to se78 and check the uploaded logo in the print previw. If it is fine then instead of defining the incluide statement manually
open the window where you want to include the logo then select the path include ->Graphics then select your logo
If logo appears in the upside down then the problem is in uploading.
Reward points if useful
Regards,
Nageswar

Can't get a color logo to print in color

PostScript newbie here... I have two issues with a postscript image I'm trying to print.
I have a green logo .eps file that I print to an HP color laserjet printer via a Linux server, but the logo only prints in greyscale. I have reviewed the image code, and tweaked the code to specify color (e.g. changed the "image" command to "colorimage"), to no avail. Can anyone assist me in getting a color printout? Here's the main part of the code (specific image bits removed):
%!PS-Adobe-3.0 EPSF-3.0
%%TemplateBox:0 0 188 78
%%BoundingBox: 0 0 235 97
%%PageOrigin:0 0
/width 188 def
/height 78 def
/pixwidth 235 def
/pixheight 97 def
/picstr width string def
/dopic {
gsave
width height 8
[width 0 0 height neg 0 height]
{currentfile picstr readhexstring pop}
image
grestore
} def
pixwidth pixheight scale
dopic
(image bits here)
%%Trailer
showpage
The second issue is that I can't get the image to embed in another page - that is, when I call the image to print in a C program, the printer spits out the logo on a separate page. The goal here is to embed a color logo (the .eps file) into a certificate, where the rest of the certificate contents are generated by PCL commands. I've been able to embed a PCL image (too much aliasing) and an HPGL image (plotter print dulls sharp corners), but the .eps file doesn't want to play on the same page as the certificate. Any ideas?
Any help is appreciated!
- Bry

I found a resolution for the color issue. As I mentioned before, I am trying to print an .eps image - out of frustration, I converted the image to .ps on the off chance that the printer would read the image differently. Sure enough, the printer liked the .ps format and printed a color image. Go figure.
Still can't get the logo to print in the body of the certificate, though. I removed the showpage command from the end of the file and tried to reprint, but that just prevented the image from printing at all. Some PostScript code investigation suggested that replacing showpage with the command show might do the trick - but no luck.
Still digging - I'll post the solution if and when I find it. And as always, if you have other suggestions please post them.

Logos are Printed Invertly

Hi,
while i am printing Forms using sapwin device type,the logos are printed invertly.how to solve this problem?
thanks in advance
Message was edited by: sugavanam yogalingam

Have you read the related note on the subject? SAP Note 683605.
Regards,
Rich Heilman

Logo is not coming properly while mailing the script

this is my code..
m converting script output to pdf and sending as attachment... my pdf conatains LOGO.. when i received the mail,text is coming properly but LOGO is not getting printed properly..
pls suggest any solution to this...
thanking u in advance...
*& Report ZZGBTEST_PDF
REPORT ZZGBTEST_PDF.
TABLES: PA0105.
DATA: LF_FM_NAME TYPE RS38L_FNAM.
DATA: WA_CTRLOP TYPE SSFCTRLOP,
      WA_OUTOPT TYPE SSFCOMPOP,
      WA_STXH LIKE STXH.
DATA: T_OTFDATA TYPE SSFCRESCL,
      T_PDF_TAB LIKE TLINE OCCURS 0 WITH HEADER LINE,
      T_LINE LIKE TLINE OCCURS 0 WITH HEADER LINE.
DATA : T_OTF TYPE ITCOO OCCURS 0 WITH HEADER LINE,
       W_FILESIZE TYPE I,
       W_BIN_FILESIZE TYPE I.
*OBJECTS TO SEND MAIL.
DATA : I_OBJPACK LIKE SOPCKLSTI1 OCCURS 0 WITH HEADER LINE,
        I_OBJTXT LIKE SOLISTI1 OCCURS 0 WITH HEADER LINE,
        I_OBJBIN LIKE SOLIX OCCURS 0 WITH HEADER LINE,
        I_RECLIST LIKE SOMLRECI1 OCCURS 0 WITH HEADER LINE,
        I_RECORD LIKE SOLISTI1 OCCURS 0 WITH HEADER LINE,
        W_OBJHEAD TYPE SOLI_TAB,
        W_DOC_CHNG TYPE SODOCCHGI1,
        W_BUFFER TYPe STRING. "TO CONVERT FROM 132 TO 255.
DATA : V_LINES_TXT TYPE I,
       V_LINES_BIN TYPE I.
SELECTION-SCREEN BEGIN OF BLOCK SCR WITH FRAME TITLE TEXT-900.
SELECT-OPTIONS: MAILTO FOR PA0105-USRID_LONG NO INTERVALS.
PARAMETERS : WDATE LIKE SY-DATUM DEFAULT SY-DATUM,
               TESTRUN AS CHECKBOX .
SELECTION-SCREEN END OF BLOCK SCR.
DATA: DATAB TYPE TABLE OF ITCOO WITH HEADER LINE,
      PDFTAB TYPE TABLE OF TLINE WITH HEADER LINE,
      BINFILESIZE TYPE I.
DATA: FNAME TYPE STRING,
      FPATH TYPE STRING,
      FULL_PATH TYPE STRING.
DATA: STRUCT TYPE ITCPO.
START-OF-SELECTION.
WA_CTRLOP-GETOTF = 'X'.
WA_CTRLOP-NO_DIALOG = 'X'.
WA_OUTOPT-TDNOPREV = 'X'.
STRUCT-TDDEST   = 'LP01'.
STRUCT-TDNOPREV = 'X'.
STRUCT-TDGETOTF = 'X'.
CALL FUNCTION 'OPEN_FORM'
EXPORTING
   DEVICE                            = 'PRINTER'
   DIALOG                            = SPACE
   FORM                              = 'ZGBTEST'
   LANGUAGE                          = SY-LANGU
   OPTIONS                           = STRUCT
EXCEPTIONS
   CANCELED                          = 1
   DEVICE                            = 2
   FORM                              = 3
   OPTIONS                           = 4
   UNCLOSED                          = 5
   MAIL_OPTIONS                      = 6
   ARCHIVE_ERROR                     = 7
   INVALID_FAX_NUMBER                = 8
   MORE_PARAMS_NEEDED_IN_BATCH       = 9
   SPOOL_ERROR                       = 10
   CODEPAGE                          = 11
   OTHERS                            = 12
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
   ELEMENT                        = 'MAIN'
   WINDOW                         = 'MAIN'
IMPORTING
PENDING_LINES                  =
EXCEPTIONS
   ELEMENT                        = 1
   FUNCTION                       = 2
   TYPE                           = 3
   UNOPENED                       = 4
   UNSTARTED                      = 5
   WINDOW                         = 6
   BAD_PAGEFORMAT_FOR_PRINT       = 7
   SPOOL_ERROR                    = 8
   CODEPAGE                       = 9
   OTHERS                         = 10
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL FUNCTION 'CLOSE_FORM'
TABLES
   OTFDATA                        = DATAB[]
EXCEPTIONS
   UNOPENED                       = 1
   BAD_PAGEFORMAT_FOR_PRINT       = 2
   SEND_ERROR                     = 3
   SPOOL_ERROR                    = 4
   CODEPAGE                       = 5
   OTHERS                         = 6
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF..
CALL FUNCTION 'CONVERT_OTF'
EXPORTING
   FORMAT                      = 'PDF'
IMPORTING
   BIN_FILESIZE                = BINFILESIZE
TABLES
    OTF                         = DATAB[]
    LINES                       = T_PDF_TAB[]
EXCEPTIONS
   ERR_MAX_LINEWIDTH           = 1
   ERR_FORMAT                  = 2
   ERR_CONV_NOT_POSSIBLE       = 3
   ERR_BAD_OTF                 = 4
   OTHERS                      = 5
IF SY-SUBRC EQ 0.
MESSAGE 'SCRIPT SUCCESSFULLY CONVERT IN TO PDF' TYPE 'I'.
ENDIF.
LOOP AT T_PDF_TAB.
REPLACING SPACE BY ~
    TRANSLATE T_PDF_TAB USING ' ~'.
    CONCATENATE W_BUFFER T_PDF_TAB INTO W_BUFFER.
ENDLOOP.
REPLACING ~ BY SPACE
TRANSLATE W_BUFFER USING '~ '.
DO.
    I_RECORD = W_BUFFER.
APPENDING 255 CHARACTERS AS A RECORD
    APPEND I_RECORD.
    SHIFT W_BUFFER LEFT BY 255 PLACES.
    IF W_BUFFER IS INITIAL.
      EXIT.
    ENDIF.
ENDDO.
REFRESH : I_RECLIST, I_OBJTXT, I_OBJBIN, I_OBJPACK.
CLEAR W_OBJHEAD.
OBJECT WITH PDF.
I_OBJBIN[] = I_RECORD[].
DESCRIBE TABLE I_OBJBIN LINES V_LINES_BIN.
MAIL TEXT TO BE FILLED UP HERE
SELECT SINGLE TDID TDSPRAS TDNAME TDOBJECT FROM STXH INTO
CORRESPONDING FIELDS OF WA_STXH
    WHERE TDOBJECT ='TEXT' AND TDNAME = 'ZGBTEST'.
IF SY-SUBRC = 0.
    CALL FUNCTION 'READ_TEXT'
      EXPORTING
       CLIENT                        = SY-MANDT
        ID                            = WA_STXH-TDID
        LANGUAGE                      = WA_STXH-TDSPRAS
        NAME                          = WA_STXH-TDNAME
        OBJECT                        = WA_STXH-TDOBJECT
      TABLES
        LINES                         = T_LINE.
    LOOP AT T_LINE.
      I_OBJTXT = T_LINE-TDLINE.
      APPEND I_OBJTXT.
    ENDLOOP.
ENDIF.
DESCRIBE TABLE I_OBJTXT LINES V_LINES_TXT.
DOCUMENT INFORMATION.
W_DOC_CHNG-OBJ_NAME = 'FORM'.
W_DOC_CHNG-EXPIRY_DAT = SY-DATUM + 10.
W_DOC_CHNG-SENSITIVTY = 'F'. "FUNCTIONAL OBJECT
W_DOC_CHNG-DOC_SIZE = V_LINES_TXT * 255.
PACK TO MAIN BODY AS RAW.
OBJ. TO BE TRANSPORTED NOT IN BINARY FORM
CLEAR I_OBJPACK-TRANSF_BIN.
START LINE OF OBJECT HEADER IN TRANSPORT PACKET
I_OBJPACK-HEAD_START = 1.
NUMBER OF LINES OF AN OBJECT HEADER IN OBJECT PACKET
I_OBJPACK-HEAD_NUM = 0.
START LINE OF OBJECT CONTENTS IN AN OBJECT PACKET
I_OBJPACK-BODY_START = 1.
NUMBER OF LINES OF THE OBJECT CONTENTS IN AN OBJECT PACKET
I_OBJPACK-BODY_NUM = V_LINES_TXT.
CODE FOR DOCUMENT CLASS
I_OBJPACK-DOC_TYPE = 'RAW'.
APPEND I_OBJPACK.
PACKING AS PDF.
I_OBJPACK-TRANSF_BIN = 'X'.
I_OBJPACK-HEAD_START = 1.
I_OBJPACK-HEAD_NUM = 1.
I_OBJPACK-BODY_START = 1.
I_OBJPACK-BODY_NUM = V_LINES_BIN.
I_OBJPACK-DOC_TYPE = 'PDF'.
I_OBJPACK-OBJ_NAME = 'FORM'.
I_OBJPACK-OBJ_DESCR = 'temp.PDF'.
I_OBJPACK-DOC_SIZE = V_LINES_BIN * 255.
APPEND I_OBJPACK.
DOCUMENT INFORMATION.
CLEAR I_RECLIST.
CLEAR I_RECLIST[].
E-MAIL RECEIVERS.
LOOP AT MAILTO.
I_RECLIST-RECEIVER = MAILTO-LOW.
I_RECLIST-EXPRESS = 'X'.
I_RECLIST-REC_TYPE = 'U'. "INTERNET ADDRESS
APPEND I_RECLIST.
ENDLOOP.
SENDING MAIL.
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
    EXPORTING
      DOCUMENT_DATA              = W_DOC_CHNG
      PUT_IN_OUTBOX              = 'X'
      COMMIT_WORK                = 'X'
    TABLES
      PACKING_LIST               = I_OBJPACK
      OBJECT_HEADER              = W_OBJHEAD
      CONTENTS_HEX               = I_OBJBIN
      CONTENTS_TXT               = I_OBJTXT
      RECEIVERS                  = I_RECLIST
    EXCEPTIONS
      TOO_MANY_RECEIVERS         = 1
      DOCUMENT_NOT_SENT          = 2
      DOCUMENT_TYPE_NOT_EXIST    = 3
      OPERATION_NO_AUTHORIZATION = 4
      PARAMETER_ERROR            = 5
      X_ERROR                    = 6
      ENQUEUE_ERROR              = 7
      OTHERS                     = 8.
IF SY-SUBRC = 0.
    WRITE :/ 'MAIL SENT SUCCESSFULLY...'.
ENDIF.
*CALL METHOD cl_gui_frontend_services=>FILE_SAVE_DIALOG
CHANGING
     FILENAME = FNAME
     PATH = FPATH
     FULLPATH = FULL_PATH.
*CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
   BIN_FILESIZE                    = BINFILESIZE
   FILENAME                        = FULL_PATH
   FILETYPE                        = 'BIN'
TABLES
   DATA_TAB                        = PDFTAB[]
FIELDNAMES                      =
EXCEPTIONS
FILE_WRITE_ERROR                = 1
NO_BATCH                        = 2
GUI_REFUSE_FILETRANSFER         = 3
INVALID_TYPE                    = 4
NO_AUTHORITY                    = 5
UNKNOWN_ERROR                   = 6
HEADER_NOT_ALLOWED              = 7
SEPARATOR_NOT_ALLOWED           = 8
FILESIZE_NOT_ALLOWED            = 9
HEADER_TOO_LONG                 = 10
DP_ERROR_CREATE                 = 11
DP_ERROR_SEND                   = 12
DP_ERROR_WRITE                  = 13
UNKNOWN_DP_ERROR                = 14
ACCESS_DENIED                   = 15
DP_OUT_OF_MEMORY                = 16
DISK_FULL                       = 17
DP_TIMEOUT                      = 18
FILE_NOT_FOUND                  = 19
DATAPROVIDER_EXCEPTION          = 20
CONTROL_FLUSH_ERROR             = 21
OTHERS                          = 22
*IF SY-SUBRC <> 0.
MESSAGE 'Error !!!' TYPE 'E'.
*ELSE.
MESSAGE 'PDF FILE SUCCESSFULLY DOWNLOADED ...!!!' TYPE 'I'.
*ENDIF.

Hi Sagar,
In scripts when you will see print preview the logo will be not shown up with clarity.Take the print out of the document and check whether logo is printing up with clarity.
Thanks
Phani

When i plug in my ipod touch to charge it starts with the battery with the little bolt under it then it goes to the apple logo screen and after a while it flashes white and just shuts off and restarts the process. Whats wrong and how do i fix it?

when i plug in my ipod touch it goes to the battery witht he bolt under it the goes to the apple logo screen and after a while it will flash white like its trying to go to the lock screen but just restarts and restarts the process and keeps doing it. What should i do? Is there any way to fix it?

See if you missed anything here:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

Mac pro running OS 10.5.8 won't boot. Apple logo and spinning wheel shows then Apple logo turns into Forbidden signage while spinning wheel continue. It happenened right after I installed a firmware. Had to restart.Please help. What can I do?

Mac pro running OS 10.5.8 won't boot. Apple logo and spinning wheel shows then Apple logo turns into Forbidden signage while spinning wheel continue. It happenened right after I installed a firmware. Had to restart.Please help. What can I do?

Work through the suggestions in this article:
Mac OS X: Gray screen appears during startup

Document prints in reverse, what setting can I change to correct this?

Document prints in reverse, what setting can I change to correct this? Not a printer problem - documents print in correct order when using other programs. Using Acrobat X Pro on a Mac.

One more place to check. Open a document you'd like to print, then click the 'Printer...' button. Hit 'Yes' to the warning dialog box that comes up. For your specific printer, this might already be enabled. Change the drop-down menu that says 'Layout' to 'Paper Handling'. It could be that the Page Order preference has been changed here too. Just a thought!
-David

How to print in reverse on my officejey 4500 wireless

I just purchesed a pad printer and I need to be able to print in reverse can you help.
Thanks

Did you check your Printer Preferences and set "Front to Back" or "Back to Front"?
Say thanks by clicking the Kudos Thumbs Up to the right in the post.
If my post resolved your problem, please mark it as an Accepted Solution ...
I worked for HP but now I'm retired!

Printing in reverse

My mother has an iMac running 10.3.9 and an HP 940C printer. When she tries to print, the pages always print in reverse order. I know how to change the setting so it prints in the correct order for the job, but how do I change it so the Standard preset will no longer print in reverse order? The print in reverse checkbox is checked by default.
She's a beginner with computers and I need to make it as simple as possible for her. I don't want her to have to uncheck the checkbox each time she wants to print or have to select a different preset if possible.

I'm assuming this question is still open...
On Paper Handling, un-click the reverse printing option, then from the Preset drop down menu, just hit "Save". If it balks at saving, give your option a name, such as Forward Print, or something...
Bob

Arabic language is printing in reverse when I am printing

Hi,
I have developed a form in english and I have written the company name in Arabic language. This Arabic language is printing in reverse when I am veiwing the print preview and as well as printing it. Anybody please tell me how to solve this.
Regards,
BSV.

HI friend,
Just see the OSS note 822634. It will solve your problem.
My friend too faced a same issue and he solved it by using that.
If you still have any queries i will help you.
Thanks,
Sri Hari

Logo in Print screen

Hello everyone,
Can somebody help me on the following:-
I want a LOGO in print Letter templete .i have Print screen templete and the code is in html .HOW can i have image coded in that .I saved the logo in shared component .
Thanks in advance !!!

Hello,
Also, if the image is NOT associated with a particular application you'll use the following:
<img src="#WORKSPACE_IMAGES#app_logo.jpg" alt="App Logo" />Regards,
Dan
http://danielmcghan.us
http://sourceforge.net/projects/tapigen

LOGO is printing in REVERSE while PRINTOUT

Similar Messages

Maybe you are looking for