Logo printed in a reversed manner

Hi,
I'm facing a problem while printing a smartform. I have a logo in my smartform which is printed in an inverse manner while printing it in a laser printer. However, in some m/c's this logo is printed properly. Is any setting required somewhere to print this properly.
Please suggest.
Regards,
Anindita

Hi Kumar,
I had faced same kind of problem,
Then I refreshed the printer specifications and it started working properly. But the thing is it is Basis or System admin problem.
Contact them and resolve ur issue,
if problem still persists, revert back
reward points if u find this as useful answer
regards
Shailendra

Similar Messages

Smartform LOGO Printing -reverse for a User???

Hi Guy,
This is typicial issue which I never got.
He says what ever he is printing like PO,STO every logo is printing up in Reverse direction.
He is using a Network printer and funny thing is all others are also using the same printer and they are able to print it in right direction.
What could be the reasons?
Regards
Vara
Message was edited by: Vara K

Hi
i have also faced some issues like instead of the logo there is a black patch appearing but when i print its fine
but when i Reinstalled the front end it fixed the issue because there isnt any thing with the print control because others are getting it fine
there could be some update patches for front end also u should look for
Harish

PROBLEM WITH LOGO PRINTING IN REVERSE DIRECTION

HI,
When Ever I take the print out of the checks, The company logo is getting printed in reverse direction, but if i look at the print preview , it is showing up correctly. even if i take the print out of just the logo from SE78, the logo is getting printed out in reverse direction...I think it is the problem with the printer settings, but i m not sure. Can any one please help me out with this issue,
Regards,
Raghu

Hi,
Are you trying to get this print directly from the backend or some frondend application triggers your form? As I also faced same problem many a times but then observed that when smartform was triggered from frontend, logo was always in its right position.
Regards,
Shikha

Sapscript logo printing reverse

In a sapscript, I am using a logo. In print preview, its coming fine but when it is printed, it is coming reverse.
What could be the problem and possible solutions? I have seen some threads here related to that but I would like to know if those solutions solved their problems.
I appreciate your time and input in advance.
Thanks a lot.

hi Krishen,
Check out these threads
logo printing reverse
Sapscript logo is printing topside down
Regards,
santosh

LOGO Printing.... REVERSE :-(

Hi Frnds,
here i am printing the logo using smartforms. in some printers it is coming correctly and in some printers logo is coming on REVERSE. i am not able to identify that problem. when i go thru print preview it is coming correct. but when i gave print... logo is coming on REVERSE.
This is coming on some printers only. i have tested using all user ids.
both printers are LASER JET only.
Regards,
Balu

hi,
It is becos of printer setttings , not the problem of abaper.
Contact your basis persons and they to rectify it.
Regards,
guru
*reward if helpful

Suddenly prints images in reverse or negative or polarized

I've never witnessed an issue like this before. Suddenly my machine is printing graphics with colors inverted, like a photo negative. It doesn't always happen, which is blowing my mind.
If I open an image in Preview.app and print, it prints in reverse. If I open, say, this url the "Inc" logo prints in reverse, but text is black on white. If I print some other Web page, it prints normally.
Has anyone else ever experienced something like this? This is near impossible to troubleshoot. I've removed and re-added the printer and that didn't work.
It's an HP LaserJet 1020 on Snow Leopard.
I've tried the same printer with a different machine, prints correctly. I've tried swapping printers, and the afflicted machine still prints in reverse. I've restarted my machine. I've applied all software updates. I've tried printing from Acrobat Pro instead of preview, same problem.
Again, it used to work flawlessly, now this madness.
Has anyone else witnessed this behavior? I feel ill.

Pahu, thanks for taking the time to reply. Next time you're in Denver, Coloardo, USA, contact me and I'll buy you a beer.
I too realized it may be a ColorSync related issue. However, in the print dialog, under "Color Matching" the option ColorSync was selected and the "Vendor Matching" option was disabled. This was with my new Samsung ML-2525W printer. I then chose to "Reset printing system..." per the KB article you mentioned.
However, after resetting the printing system and re-adding the printer, the troublesome images would still print incorrectly. But you mentioned the gutenprint driver, which got me thinking, perhaps if using the Gutenprint driver I might be able to select the "Vendor Matching" color profile.
I changed the driver to the Samsung ML-2550 Gutenprint driver, checked the color options and saw that "Vendor Matching" was selected by default, and tried printing. The printer output is now correct!
Thanks for your time and for sharing your ideas.

How do I print as a "reverse or mirror image" on the HP Officejet Pro 8600 model # N911a

How do I print as a "reverse or mirror image" on the HP Officejet Pro 8600 model # N911a

I have spent hours figuring out how to print a t-shirt transfer since my new HP printer doesn't seem to allow for mirror image printing (yet my old HP printer easily let me select this feature). Here's what worked for me, using Word 2010:
Create the text and insert any images into the document as you normally would.
Go to Insert / WordArt and chose a style of lettering (I don’t think it matters what you choose since you will be cutting and pasting the data from 1 above). A text box will appear and a new "double-decker" tab will appear at the right (Drawing Tools on top and Format below).
Copy what you created in step 1 and paste it into the text box.
Click on the Format tab (the cursor must be inside the text box for the Format tab to be visible).
Choose Text Effects / 3-D Options and then 3-D Rotation Options. A dialogue box will open. For the X value, enter 180. Do not enter anything for the other values. Your image should have rotated to mirror image.
Click Close and save your document.
You should now be able to print your document as usual.
Good luck!

Hi from few days onwards i found one abnormality in my iphone4s .That is if i observe my phone settings screen from right side of the device top navigation appearing rightside height is more than the left side. In reverse manner from the left side.

Hi from few days onwards i found one abnormality in my iphone4s .That is if i observe my phone settings screen from right side of the device top navigation bar appearing rightside height is more than the left side. In reverse manner from the left side. I dnt know whether it is default feature of iphone or not but i am really disappointed due to this. So please anyone help me in this issue and let me clear my doubt and make me happy. Thanks in advance.

I believe what you are seeing is an optical illusion when viewing the screen from the side. Try to align one of the one of the options in Settings, like General, with the navigation bar you'll see it does the same thing.
Hope that helps

Printing interest invoice reversal

Hello, everybody
Can anybody tell me any way to print the reversal of an interest invoice in IS-U FI-CA? We have transactions FPI1 / FPINTM1 for generation of that invoice, which includes an option for printing, but for reversal of an interest document there is only FP08 or FP08M, which, as far as I can see, do not have any possibility to print anything. Is there a different transaction for printing such reversals?
Any answer/solution will be highly appreciated.
Thank you in advance,
Bogdan

Hi,
you can create a print request in event 0020 or 0030. You have to do checks to be sure that you are doing an interest document reversing because these events are called in all the FICA documents postings, the print request is something like:
Select customizing for correspondence type ZXXX
Pickup customizing
CALL FUNCTION 'FKK_GET_CORR_CUSTOMIZING'
    EXPORTING
      i_cotyp   = c_cotype_ZXXX
    IMPORTING
      e_tfk070f = l_tfk070f
    EXCEPTIONS
      not_found = 1
      OTHERS    = 2.
IF sy-subrc <> 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
            WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
Fill cluster table structure for the correspondence container - Only need to send information that you cannot put in DFKKCOH or DFKKCOHI
i_zdomcluster-bankn = p_wa_but0bk-bankn.
APPEND i_zdomcluster.
get a temporary corr key as the export id
that one will be updated in FKK_WRITE_CORR
CALL FUNCTION 'FKK_CREATE_COKEY'
    EXPORTING
      i_cotyp = c_cotype_ZXXX
    IMPORTING
      e_cokey = w_cokey.
write it with the export command,
so that the cluster structure is build by that command.
EXPORT i_zdomcluster FROM i_zdomcluster
         TO DATABASE dfkkcodclust(co)
         ID w_cokey.
Pick it up again, access with relid for index use
SELECT * FROM dfkkcodclust INTO TABLE i_dfkkcodclust
           WHERE relid = c_relid_co
           AND   cokey = w_cokey.
Fill C_DFKKCOH structure
l_dfkkcoh-cotyp       = c_cotype_ZXXX.
l_dfkkcoh-gpart       = p_gpart.
l_dfkkcoh-vkont       = p_vkont.
l_dfkkcoh-spras       = sy-langu.
l_dfkkcoh-formkey     = l_tfk070f-formkey.
l_dfkkcoh-formkey_rdi = l_tfk070f-formkey_rdi.
Fill L_FKKCOINFO structure
l_fkkcoinfo-coidt = sy-datum.
Call function FKK_WRITE_CORR for the creation of the correspondence
container:
CALL FUNCTION 'FKK_WRITE_CORR'
    EXPORTING
      i_fkkcoinfo          = l_fkkcoinfo
      i_avoid_sender_det   = c_xfeld_x
      i_avoid_receiver_det = c_xfeld_init
      i_avoid_bukrs_det    = c_xfeld_init
      i_avoid_language_det = c_xfeld_x
      i_avoid_formkey_det = c_xfeld_x
    TABLES
      t_dfkkcoh            = i_dfkkcoh
      t_dfkkcodclust       = i_dfkkcodclust
    CHANGING
      c_dfkkcoh            = l_dfkkcoh.
Check if correspondence container was created:
READ TABLE i_dfkkcoh INTO l_dfkkcoh INDEX 1.
IF sy-subrc NE 0.
    Error handling - TBD
ENDIF.
Cheers,

My CS2 templates are printing out in reverse.

My CS2 Templates are printing out in reverse. All other programs are printing normally. Can anyone advise to clear this problem. Many thanks

Prints pages from last to first:
or if you're outputting film this flips the pages

Logo printing issue in Smartform

Hi,
I have uploaded company logo and i am using this logo in my Z*PO smart form, during printpreview it is showing correctly (the alignment and resolution), if i print that, the logo alignment is not proper, it is coming down than what i am aligned, the placement is perfect in printpreview.
Let me know, is there any other setting that i need to make.
Thanks,
Prasad S.

Hi friend,
I think there are lot of related post in SDN for this problem. Just search the forum before posting questions.
One of the similar post i have attached below.
Link : [Problem with printing logo in smartforms|Problem with printing logo in smartforms;
I think this will help you. If you still did not get the answer just search in Google by giving the key word "SAP + SDN + Smartforms + Logo printing problem". There are large of solutions to help you.
Thanks,
Sri Hari

Wish to purchase a printer that will reverse print for transfer app and also has 4 seperata ink well

Wish to purchase a printer that will reverse print for transfer app and also has 4 seperata ink well

There are severall units out there with 4 ink cartridges, not sure about the option to revesre image in the printer, however mirroring an image is possible in most software programs. Even in paint i think.
Say "Thanks" by clicking the Kudos Star in the post that helped you.
Although I work for HP my posts and replies are my own
Please mark the post that solves your problem as "Accepted Solution"

Logo Print

Hi all,
I am having one problem with Logo print .
In one smartform i have changed one logo
In preview it is showing perfectly
But in print out it is showing it is showing
dots ..,
regards,
Mohd.

Hi,
If you have uploaded the logo from the desktop means it will come like that if you want to remove the dots before saving the logo first the image as 256 bit format image and then upload.
Or else if you are using an already existing image then change the resolution of the image in the smartform and then if the problem persists try to take the print out by changing the printer there if it is coming fine means then the problem will be with the printer.
Hope this will help you.
Regards,
Venkat.

Abap report print logo or image in reverse order

Dear all,
Currently we are using sap enterprise 4.7 . in our abap report sap report and data is OK but log is print in reverse in HP LaserJet p255d and HP LaserJet p250 series PCL 6.
But same report in hp leaser jet 1320 run ok in SWIN driver.
I change the driverson output dvice in sap but result is same how can I update or install print driver that can be I see in SPAD --> output device --> device type
thanks
Shahid

Hi,
please check this [LINK|http://sap.ittoolbox.com/groups/technical-functional/sap-basis/how-to-install-new-printer-drivers-in-sap-1262490?cv=expanded] and SAP Note : 8928
Regards,
Srinu

Sapscript Logo upside down with reverse color

Hello experts,
In ECC6, my colleage and I tested a sapscript logo on the same black&white printer. However, the printouts came out differently. My laptop produced a correct logo, but my colleage's one produced an upside down logo with reverse color. This is the statement we used in the form. Do you know if we miss something to check for? Please help!
INCLUDE ZHEX-MACRO-BELLLOGO2C OBJECT TEXT ID ST
Best regards,
Chuong

Hi ,
First go to se78 and check the uploaded logo in the print previw. If it is fine then instead of defining the incluide statement manually
open the window where you want to include the logo then select the path include ->Graphics then select your logo
If logo appears in the upside down then the problem is in uploading.
Reward points if useful
Regards,
Nageswar

Logo printed in a reversed manner

Similar Messages

Maybe you are looking for