Logo printing using Intermec Px6i

Hi,
we are trying to print Logos using intermec PX6i...but without any results!
Texts and barcode prints well but no logos..
does anyone encountered the problem?
thank you
Emmanuel

Dear Emmanuel,
Which device type do you use when you print?
Best regards,
Norbert

Similar Messages

Print company logo using intermec printer

Hi
How can I print a company logo on the label using intermec printer ?
Please , help me .
Helena .

I am new in Intermec Printing
The contens of label looks like text below , I only need to add a Company Logo that's all .
I have a Company logo as bmp file .What can I do for it ?
<STX><SI>T1<ETX>
<STX><ESC>C<ETX>
<STX><ESC>P<ETX>
<STX>E4;F4;<ETX>
H00;f0;o0,0;c0;h1;w1;b0;d3,
H01;f0;o450,100;c38;h1;w1;b0;d0,20
H02;f0;o1000,100;c38;h1;w1;b0;d0,20
H03;f0;o420,190;c37;h2;w2;b0;d3,POLYNIL
H04;f0;o920,190;c37;h2;w2;b0;d0,20 POLYNIL CODE
H05;f0;o340,333;c34;h1;w1;b0;d3,Material Code
H06;f0;o750,323;c33;h2;w2;b0;d0,15
H07;f0;o340,435;c34;h1;w1;b0;d3,Production Batch
H08;f0;o690,395;c35;h2;w2;b0;d0,13 PROD.BATCH
H09;f0;o500,510;c33;h1;w1;b0;d3,Gross weight
H10;f0;o420,530;c33;h1;w1;b0;d3,kgs
H11;f0;o350,570;c37;h1;w1;b0;d0,10
H12;f0;o700,530;c33;h1;w1;b0;d3,lbs
H13;f0;o630,570;c37;h1;w1;b0;d0,10
H14;f0;o1000,510;c33;h1;w1;b0;d3,invoiced weight
H15;f0;o950,530;c33;h1;w1;b0;d3,kgs
H16;f0;o910,570;c37;h1;w1;b0;d2,16
H17;f0;o1250,530;c33;h1;w1;b0;d3,lbs
H18;f0;o1180,570;c37;h1;w1;b0;d0,18
H19;f0;o100,675;c34;h1;w1;b0;d3,Pallet no.
B20;f0;o400,950;c6;w8;h200;d0,10 barcode for pallet
H21;f0;o1460,665;c33;h1;w1;b0;d3,Packing units
H22;f0;o1460,690;c33;h1;w1;b0;d3,on pallet
H23;f0;o1520,750;c40;h1;w1;b0;d0,10 PACKING UNITS
H26;f0;o1510,710;c33;h1;w1;b0;d0,10 NOT PRINTED
H27;f0;o1510,710;c33;h2;w2;b0;d0,10 NOT PRINTED
H28;f0;o590,1180;c30;h2;w2;b0;d3,Made in Israel
H27;f0;o380,660;c41;h2;w2;b0;d0,10 Pallet number
W29;f0;o55,79;h1169;l1636;w4      BOX
L30;f0;o318,205;l1103;w4
L31;f0;o318,312;l1103;w4
L32;f0;o318,397;l1103;w4
L33;f0;o318,510;l1103;w4
L34;f0;o058,658;l1630;w4
L35;f0;o058,900;l1630;w4    3 FROM DOWN
L36;f3;o594,579;l85;w4
L37;f3;o1146,579;l85;w4
L38;f3;o870,552;l112;w4
L40;f3;o319,80;l0805;w4
L41;f3;o1422,80;l0805;w4
R

Using Intermec printers to print through LabVIEW

Hi! I would like to call my Intermec label printer to print through LabVIEW over the serial connection (RS-232 port) but I have no idea on how to start. Anyone has any suggestions or examples that I can refer to ?
Thanks!
Regards,
YuanGe

Hi Smercurio,
Thanks for the reply. I only have some example programs which were written using Visual Basic 6.0 as reference. I do have the Intermec Programming Language(IPL) Guide also.
I had tried to do some callings to the printer using the commands from the IPL Guide, but it seems that the printer doesn't respond to anything at all. I am using the basic_serial_write_and_read.vi to do some serial programming with the printer and LabVIEW but to no avail. Every command that I tried to input, the read control returns exactly what I had input, which probably shows that it is not working as I hope it is.
I had used LabVIEW for my final year project during my university days, but it had nothing to do with serial connection/communication, so you can say I am a greenhorn in this area.
Attached is the VI that I used to do the calling and the IPL Guide.
Many thanks!
Regards,
YuanGe
Attachments:
basic_serial_write_and_read1.vi ‏31 KB
IPL Intermec Printer Language 066396.pdf ‏1522 KB

Sapscript logo printing reverse

In a sapscript, I am using a logo. In print preview, its coming fine but when it is printed, it is coming reverse.
What could be the problem and possible solutions? I have seen some threads here related to that but I would like to know if those solutions solved their problems.
I appreciate your time and input in advance.
Thanks a lot.

hi Krishen,
Check out these threads
logo printing reverse
Sapscript logo is printing topside down
Regards,
santosh

Logo printing issue in Smartform

Hi,
I have uploaded company logo and i am using this logo in my Z*PO smart form, during printpreview it is showing correctly (the alignment and resolution), if i print that, the logo alignment is not proper, it is coming down than what i am aligned, the placement is perfect in printpreview.
Let me know, is there any other setting that i need to make.
Thanks,
Prasad S.

Hi friend,
I think there are lot of related post in SDN for this problem. Just search the forum before posting questions.
One of the similar post i have attached below.
Link : [Problem with printing logo in smartforms|Problem with printing logo in smartforms;
I think this will help you. If you still did not get the answer just search in Google by giving the key word "SAP + SDN + Smartforms + Logo printing problem". There are large of solutions to help you.
Thanks,
Sri Hari

Can Linked vector logos be used in CC Libraries across invited team members?

Can Linked vector logos be used in CC Libraries across invited team members?
Working in a team of five designers, we currently use libraries to consolidate our many logos for multiple brands.
It would be great to utilise the CC Libraries now available in Indesign to maintain consistency across applications, however after trying, it seems linked vector files placed into a new CC Library are not linking when shared with my colleagues.
I have tried linking logos from both our internal server and my desktop and then creating a new CC Library, either way, when opened from an invited user, the logo has no link.
Only recreating a logo as an Indesign graphic will the logo populate across invited users. i,e copying and paste from illustrator to Indesign, then insert the recreated logo into a CC Library. This isn't ideal especially with the amount of logos we use.
Alternatively, adding a logo into a CC Library from Illustrator, the logo is an imbedded file when placed into Indesign. Unsure how these files will behave when sending artwork to print. Again, this isn't ideal, opening every logo in Illustrator to add to a CC Library would be fairly time consuming given the quantity we deal with.
Does anyone have any thoughts or share the similar views on this?
Many thanks

@Designer1976 – if you place an AI logo in InDesign and move that placed logo to a CC Library, it should behave like any other image you move to a CC Library. Other people who have access to your CC Library could place the logo, print it, export to PDF, if the file is available on a mutual network drive or a cloud drive like Dropbox etc. And of course, if the loaded file is synched which can take a moment, if you just moved it to a remote drive in the cloud.
I tested this with eps file types.
AI files (PDFs with AI code embedded) placed in InDesign should make no difference.
However:
1. If I placed an eps file in InDesign
2. Moved the eps file to my Dropbox account
3. Came back to InDesign
4. Relinked the placed eps with the one in my Dropbox
(all good now in the perspective of an InDesign document)
I was not able to add that relinked eps file to my CC Library.
By trying I only heard a "blip" or so. And nothing was added.
To make it work, I first had to:
1. Save the InDesign document
2. Close the document (maybe optional, can't remember)
3. Reopen the document (maybe optional, can't remember)
Then I could add the placed eps to my CC Library.
After that it worked like it should.
Not as seamless as it should be…
Uwe

Script logo printing

I am uploading colored BMP/TIF file using program RSTXLDMC. I am using BCOL as type. But when i go for print preview from SO10, it is coming as black and white. Even in invoice it is not colored.
Please tell me how to get colored image.

hi praveen,
this may be helpful to u.
-> you should have the logo or any graphical element that you want to include inthe form/layoutset in a valid graphic file format like .bmp or.jpg
->this .bmp/.jpg has to first converted into a .tiff file format using any software that would do the conversion like a software called photowork.
-> to include this graphic inthe form,define a new window and incorporate the text element (ie the tiff file) in the new window.
->after converting to the tiff format,access thefile on front end.
->upload the file as text module using the abap/4 report RSTXLDMC.
->execute this program from the abap/4 editor.
->use RSTXLDMC to save the TIFF file on your front end.
->enter the location of the TIFF file name on ur system.
->specify BMON or BCOL as type of raster image.
->the system generates a suggested name for the text : ZHEX-MACRO-*.the asterix denotes file tyep.for eg: ZHEX-MACRO-LOGO.
->use the ID 'ST' and the logon language.
->this completes the process of converting the .tiff file into text element.
->to incorporate the logo specific text elment into form/layout set,enter INCLUDE ZHEX-MACRO-LOGO OBJECT TEXT ID ST in the first line.
regards,
sravanthi.

Logo Print

Hi all,
I am having one problem with Logo print .
In one smartform i have changed one logo
In preview it is showing perfectly
But in print out it is showing it is showing
dots ..,
regards,
Mohd.

Hi,
If you have uploaded the logo from the desktop means it will come like that if you want to remove the dots before saving the logo first the image as 256 bit format image and then upload.
Or else if you are using an already existing image then change the resolution of the image in the smartform and then if the problem persists try to take the print out by changing the printer there if it is coming fine means then the problem will be with the printer.
Hope this will help you.
Regards,
Venkat.

How to suppress extra form feed for character report printing using ORARRP?

Dear All,
We are using Oracle Application Server 10g (10.1.2.0.2) on Windows 2003 Server and most of our client PC's are Windows XP Professional machines. We are migrating our existing oracle application from 2-tier architecture to 3-tier architecture (6i to 10g). We have installed ORARRP utility for remote direct printing and to a limited extent we are successfull in getting the things work out for our system users, However, we are facing a problem using the ORARRP utility for which we are not able to find a solution till date.
We have configured ORARRP utility on every user's PC and the printing of bitmap reports is working well. However, while printing CHARACTER reports using ORARRP utility, after the report gets printed, an EXTRA FORM FEED is issued by ORARRP to the printer and because of this the printer stationary skips one extra page and advances to the next page. Please note that this EXTRA FORM FEED happens only while printing a CHARACTER REPORT.
Has anyone come across such a problem using ORARRP ? How can we avoid this extra FORM FEED from CHARACTER REPORT printing using ORARRP ? Is there any other tool which supports remote direct printing just like ORARRP?
I shall be highly obliged if anyone could reply to my queries ASAP.
Regards,
KrishnaKumar S

Please help ! I tried the "send_form_feed" and "postscript_dos_print" parameters without success. The extra form feed is always there. Thanks.

HP Deskjet 3550 cannot print using Airport Extreme via USB connection on Windows 7 64 bits

Product Name and Number: HP Deskjet 3550 Inkjet Printer
Operating System installed: Windows 7 Home Premium 64 bits
Error message: None
Any changes made to your system before the issue occurred: Setting up HP printer using Airport Utility to add a new printer and installed Bonjour Print Wizard.
Problem: My printer is already set up using Airport Utility. When I print something, the printer doesn't do anything. Is there something I haven't done lately in order to get this printer working using my wifi router?
Suggestion #1: Are the print jobs getting stuck in the print queue? You can check this by clicking on the printer icon in your task tray by the clock.
Error Message #1: Yes, the print job got stuck in the print queue, but the moment, it disappeared from the print queue and the printer doesn't print at all. This is frustrating.
Suggestion #2: Does the printer work as expected if you connect it directly to the PC via USB?
Error Message #2: Yes, the printer works if I connect it directly to my PC via USB, but I don't understand why it wouldn't work with the wifi router, though.
Suggestion #3: This has to do with the way the router handles the connection to the printer. I found another thread, regarding this issue, and it has some information that may help resolve it.
http://h30434.www3.hp.com/t5/Printer-Networking-and-Wireless/Print-Problem-Using -USB-Printer-on-Airp...
If that does not help, I would recommend posting on the Apple forums, as they may have more expertise with the router's abilities:
https://discussions.apple.com/community/wireless/airport
Error Message #3: After clicking on the first link that you posted, it was very helpful, but the printer couldn't print completely and somehow it would stop at the quarter of a paper. It looks incomplete when I took it out from my printer. It does that every time.

UPDATE!
Problem solved! So this is just a followup in case someone else ever stumbles into these boards with the same or similar problems as mine, that is, trying to run an HP Deskjet D1500 series printer [mine's a D1520] on an Airport Extreme wifi router's USB port as a network printer [with the Airport Extreme controlled by an ancient G4 PowerMac Quicksilver currently running OS X 10.4.11).
Although it probably SHOULDN'T matter, since this type of printer works fine with just the Tricolor cartridge as shipped when hooked up directly to a computer's USB port, on a hunch I got a black HP cartridge (that's a type 21, not type 22 as I had earlier said), slapped it in, tried a test page, and all's well. So, we can call off the technoid hounds. Everything running perfectly.
I hope this message in a bottle may help someone else out there some day soon who may be scratching his or her head with a similar stumper. And just to recap those important Windows printer settings, they are:
* [Printer Properties--> Ports--> Add New Port...] "Standard TCP/IP Port"
* [Configure Port] IP Address "10.0.1.1" and Port "9100"
Best of luck!
Bilgey

PhotoSmart 310a doesn't print using wireless connection

First... I have to say that if I had known what a HUGE pain in the butt this printer was I would never have bought it. On top of that, the thing apparently doesn't have an option to "hard wire" connect it to my computer... which the guy at the store didn't bother to point out. On top of that HP's customer service is, apparently, non-existent, as attempts to reach by phone are useless.
They can't even seem to get the model number on the machine where you can find it... so the instructions on "how to find your model number" are useless.
That said... here is my problem... which if I can't fix, I'm simply returning this and getting something else.
I have my printer all set up. Wireless is set up. ePrint is set up. Test pages print fine.
I have actually been successful printing with it ONE time.... so I know that it can do it.
It does give me a "low signal" message - however it seems to have no problem printing using the email option, or downloading from the web for the "reports." It scans and my laptop "sees" the scanned image, which is transmitted over the wireless network. If it is truly a low signal problem it seems like it would have issues with other functions regarding the internet.
BUT... when I send something from my laptop (MacBook OSX 10.5.8) to the printer it says...
.. connecting
.. idle
.. priinting (%)
.. then the print job disappears from the queue in the dialog box ... yet nothing actually prints out.
.. it then say's "Printer Ready" - I guess ready for another print job that it won't perform.
.. It does NOT give any kind of error code... say it's "paused" or anything like that. It's as if it THINKS it is printing... but it does not. It makes no sound like it's trying to print either. Paper is loaded in fine and it will print test pages with no problem and doesn't indicate any problems on those other than "low signal"
... When I use the "printer utility" to print a test page - also goes wireless - it prints just fine.
I've tried to use this printer only 4 times now for various jobs... and each time has been an ordeal lasting from 30 minutes to several hours. I've managed to get it to print on one occasion... though I can not remember how I did it.
It has NO problem printing from an email... so I guess I could just always do it that way... but it involves several extra steps to do so and I'm not even sure it would work for every type of print job I need.
It works fine scanning
It works fine photocoping
It works fine printing from ePrint (email)
It just DOES not print via the wireless connection
I don't understand how a company can make something this sophisticated and not have it give you an ERROR CODE when it fails to complete a function... and frankly, I'm fed up with this thing. It's a big, oversized, shiny paperweight and I've wasted way too much of my time trying to figure it out. This is one last ditch effort.
Can anyone help? THANKS so much if you can!
Sue

It is more likely a network problem, so please tell me about your network - router brand/model, encryption type (WEP, WPA, etc) and ISP type (DSL, Cable, etc).
In the mean time, you could try this quick trick; resetting the printing system:
- Sys Prefs, Print & Fax
- Right (control) click in the rectangle listing your printers and select Reset Printing System.
WARNING - this will delete ALL of your printers!
- Select the plus sign to re-add it. Look for the printer, select it and wait until the "Add" button becomes available. Click it.
Oh, and indeed this printer does have a USB port for connection directly to your computer. It does NOT have an Ethernet port for connection directly to your router.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Unable print scheduled report on network printer using BOEXI 3.0

Hi,
I'm unable to print a scheduled report on network printer using BOE XI 3.0. I get the following error
Error Message: Error in File ~ce6a054be1a25b52.rpt: Request cancelled by the user. ]
Has anyone encountered this kind of problem and know what the solution is?
Thanks,

Hey Falk,
Thanks for the response.
I can print on a network printer after I changed 'Crystal Reports Job Server' to run under a user account that has privileges to access the printer.
To answer your questions regarding the problem:
>Can you schedule the report successfully ?
>>Yes I was able to schedule the report successfully
>Can you print the report successfully?
>>NO the scheduled task would fail with the error message as posted above.
Thanks,

Crystal report printing using epson dot matrix printer (continouos paper)

Hi there, im tiff from the philippines.
i have a question on printing using a crystal report. How do i print using epson continuous printer(dot matrix)? im having a problem printing to that type of printer specially using continuous paper. the first page is correct but unfortunately the succeeding pages are not. its automatically adjusted upon reaching the second page. hope you can help me.
thanks a lot and looking forward to hear from you soon.
tiff

Check with the printer manufacturer that the matrix printer is Unicode compliant. If it is not, it will not work with Crystal Reports. If it is, make sure you have the latest printer driver updates.
Download SP 1 for CR 102 from here;
https://smpdl.sap-ag.de/~sapidp/012002523100006007872008E/crvs05sp1.exe
See the following resources re. printers;
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/a09051e9-721e-2b10-11b6-f9c65c64ef29
[Note #1314394|http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_dev/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes.do]
Ludek

How many lines we can print using Non-alv report list ?

Hi Experts,
How many lines we can print using Non-alv report list ?
regards
vishnu

Hi,
It depends on the page size according to the page size we can set the no. of lines as follows,
REPORT program_name NO STANDARD PAGE HEADING
LINE-SIZE 290
LINE-COUNT 65.
Hope it helps you,
Regards,
Abhijit G. Borkar

On MacBook Pro unable to print webpage; I get a single blank page. But I can print using Safari. Started last week while using Firefox 3.6. I downloaded Firefox 5.0--same problem.

On MacBook Pro unable to print webpage; I get a single blank page. But I can print using Safari. Started last week while using Firefox 3.6. I downloaded Firefox 5.0--same problem.

I am now able to do live broadcasts with my i-sight, but my original problem still exisits....
Unsolved Problem:I need to be able to broadcast from CamTwist as CamTwist is the only program that will allow me to do what I need to do. Justin.tv and Ustream.tv do not recognize CamTwist for reasons I can not explain.

Logo printing using Intermec Px6i

Similar Messages

Maybe you are looking for