Logo seen in report Title is not properly alligned when downloaded to Excel

Hi All,
Iam facing an issue with Download to Excel link on my OBIEE report.
When I download my report to Excel which has a logo in the report title, in the excel sheet the logo occupies all the cells till the end of the report columns and my report title is seen after those columns.
Can you please suggest a solution or a workaround for this.
Many Thanks in adavnce.
Suman
Edited by: Suman B on Sep 20, 2010 4:10 AM

hi
Suman
i am also faced same problem. if u got any solution for this post
let me know
Advance Thanks
Satya

Similar Messages

APEX4.0.2 - Interactive Report total is not getting printed when downloaded

I've an Interactive Report based on a sql in Apex 4.0.2. There is a Balance column whose total sum is displayed at the bottom of the table.
When I download the report, the total sum of balance column is not getting printed in the bottom of the report.
Could this be a bug or have I missed some setting?
Thank you for the help.

Hi,
Whilst you can update the SQL to include totals, these would probably not be effective if the user filters the data (the total row may be filtered out) or sorts columns (as the total row would likely be sorted as normal data).
Unless someone else has any other ideas on this, this may be something that needs to be logged with the Apex team as an enhancement request - create a new thread and start the Subject as "Enhancement Request:"
Andy

Print Logo in Classic Report (Write Method,Not ALV)

Hi All,
I'm currently doing conversion of the All the Classic Report with addition of Header with 'LOGO'.
I'm willing to find out that Function (CALL FUNCTION 'WWW_GET_MIME_OBJECT') is only able for display but not show out during printing.
Is that any method, I can do it(Print with Logo) without conversion to SAP Script or Smartform that was exhausted.
*Please take note is Classic Report with Write Method (Line by Line), Not ALV.
Thank you all in advance
Regards,
Trevor Wong.

Hi,
It is possible to include logo in classical report but its not possible to print logo in classical report. It can be done in ALV's.
Write the code in Top-of-page event in ALV.
The following is the code for inserting the logo in ALV.
FORM TOP_OF_PAGE.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
       EXPORTING
           I_LOGO             = 'ENJOYSAP_LOGO'
            IT_LIST_COMMENTARY = GT_LIST_TOP_OF_PAGE.
ENDFORM.
Regards
Purnand

IPhone 4gs 16GB "the network connection could not be made" when downloading apps

IPhone 4s 16GB brand new, "the network connection could not be made" when downloading apps. This problem occurs using Wifi, 3g, and even when pluggin into a computer. Please help

Anyone? It's still not approved/working =/.

Can not see Preveiws when downloading into Lightroom 3

In downloading photos from my CanonEOS60 into Lightroom 3 I am getting "Preveiw unavailable for this file" help.

Hi Jim, I have had Lightroom 3 since it came out and have always used raw and had a full preview of all the photos held in the camera, this is what I can,t understand.
Original message----
From : [email protected]
Date : 07/01/2015 - 15:16 (GMTST)
To : [email protected]
Subject : Can not see Preveiws when downloading into Lightroom 3
Can not see Preveiws when downloading into Lightroom 3
created by JimHess in Photoshop Lightroom - View the full discussion
Are these raw images or JPEG images? If they are raw images are you using the sRaw feature? I don't know if your model has that option. Just looking for possibilities.
If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7073758#7073758 and clicking ‘Correct’ below the answer
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7073758#7073758
To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"
Start a new discussion in Photoshop Lightroom by email or at Adobe Community
For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

Classic report ORA-00933 SQL command not properly ended when enabling sort

Hi,
Oracle 11g r2, APEX 4.1.1.00.23.
I have some reports of type SQL Query (PL/SQL function body returning SQL query), so the source is like the following :
begin
return points_ui.get_points_query(:P0_FILTER_TYPE);
end;Without any sort option, the report is rendering successfully.
But I got the following error when a try to enable the sort option for a column :
ORA-00933: SQL command not properly endedI read about this error on Oracle forums, and I saw it was a bug in a previous release, but I thought it was fixed in 4.0.2...
Any help would be much appreciated.
Thanks.
Yann.

OK indeed I had to remove the order by clause from the query, I should have tested this...
I thought there were some checks in the internal APEX process to "merge" the order by clauses, but it seems it is not the case...
Thank you for your help.
Yann.

Report Title and Text Area issue when exported to pdf using Viewer

Hi there,
We are using OracleBI Discoverer Version 10.1.2.55.26
We have reports that displays Report title containing the following
- Report Title
- Runt Date and Time
- Page No
And text area which displays 'Last Page'
Following properties are set at the worksheet level using page setup
Report Title --> 'Print on every Page'
Text Area --> 'Print on last page'
The report when exported to PDF using Discoverer plus works fine and displays report title and text area as defeined.
But when we try to export the same report to pdf from Discoverer viewer, it displays
- Report title on first page only.
- text area on all pages
All our users accesses report using discoverer viewer so we cannot open discoverer plus to them.
Is there a solution which will enable us to export the report in pdf using discoverer viewer and displays the same output as discoverer plus.
Please let me know... If you have any questions then please feel free to ask.
Thanks in advance for your help...
Manish

but when opened on other os x machines some text is colored differently than it should be
Well, if typographic objects are colour managed, the colour appearance is dependent on the source ICC profile that describes the colourants in the typographic objects and the destination ICC profile that describes the colours the display is able to form and the RBC colourant combinations that will form those colours.
In general, typographic objects should have special treatment, since the expectation is not that typographic objects should be colour managed, but that typographic objects should simple be set to the maximum density of dark. On a display, that is R=0 G=0 B=0 and on a seperations device (a lithographic press) that is C=0 M=0 Y=0 K=100.
If for some reason typographic objects are colour managed, and if the ICC profiles for the displays are off by half a mile or more in relation to the actual state of the display system, then the colours will not be the same. On the other hand, if those displays are calibrated and characterized, then the colourants will be converted to form the same colours on the displays.
/hh

"Given final block not properly padded" when using wrong secretKey

Hello guys, I browsed the questions in this forum regarding my problem, but somehow couldn't find a solution to this.
I generated two SecretKey key1 and key2. Now I'm using the Cipher class to encrypt a message to key1. If I try to decrypt it with key1, everything works fine. But if I try key2 I get the "Given final block not properly padded"-message in my exception backtrace instead of just unreadable stuff, which I excepted (using the wrong key). This happens regardless of the symetric algorithm I use.
Can you help me?
Thanks,
Sebastian

Most symmetric algorithms work on data of a given block-size. If your data isn't a multiple of that size, it's padded. This removes a clue that a cryptanalyst can use to try and break your encryption. At decrypt time, the Cipher expects to see padding-related bits at the end of the stream, so it knows how many pad-bits were stuck on to begin with. When the end of the stream doesn't match the expected padding-protocol, you get the exception noted.
Now - if you decode with the wrong key, you get junk. The chances of that junk ending with a valid padding-indicator is...small. So you're more likely to see "BadPadding" than a valid (if incorrect) plaintext.
You could use "NoPadding" on both ends, and do your own manipulation of the bit-stream to make the Cipher happy. Then, you wouldn't get BadPadding exceptions. But you'd have to write some pretty fiddly code on each end.
Anybody else want to double-check me on this? I'm away from my books at the moment. Floersh? Euxx?
Good luck,
Grant

Why does my computer tell me the "Disk was not properly ejected" when waking from sleep mode?

I am a real "Newbie" to Mac OS. I have a new iMac 21.5" running OS X Lion. When I awake the computer from sleep mode with the spacebar on the keyboard, I get the message "The disk was not ejected proper, etc.". Iss there something I am doing wrong?
Thanks,
Mike G.

I am one of those who had experienced this kind of problem. My former Time Machine disk used to automatically eject itself when my iMac sleeps, hence upon waking up my iMac. i always get the error message that the disk was not properly ejected.
From what I was able to gather from my experience, until the time that I found a workable solution, I think I can say that the problem is most probably caused by the incompatibility of certain external drives with how the iMac operates when on sleep and upon waking up. Some external drives are just not able to cope with how the iMac tries to remount a connected disk after it wakes up from sleep. There are just some external drives that cannot continue to be mounted after the iMac wakes from sleep. There are just some external drives that are not responsive enough. In other words, the existence of the problem lies with the type of external drive you are using.
My former Time Machine disk, the problematic one, was an Imation M300 Apollo 1 TB external disk. It unmounts everytime my iMac went to sleep, but does not remount after waking up the iMac. The disk will continue to be unmounted until I physically remove its USB connector and replug it in the iMac.
I replaced my former Time Machine disk with my current one, a Transcend Storejet 1 TB. And the problem went away. The Transcend disk continue to be mounted after the iMac is woken up even from the longest of sleep. I have even the energy saving option "put the hard disk to sleep..." checked. The Transcend disk comes with a Y cable, i.e. it has two USB connectors, but I only connect the one for both data and power--and it still remains mounted even after waking the iMac from sleep.
The sad realization, however, is that since there are only some external drives that are not able to work with the iMac, no matter how many those some may seem to be, it will be highly unlikely for Apple to itself fix this kind of a problem.
I, therefore, make the following recommendations:
1. Check first if your problematic disk has a firmware upgrade available. In some cases, the firmware upgrade may be enough to make the disk more responsive to the iMac waking up.
2. If there is no firmware upgrade available, check if your power/data USB cable is properly working.
3. If your power/data USB cable is in order, and the problem still persists, I think it is inevitable that you have to replace the problematic disk with a newer one that could respond well with the iMac's wake/sleep operation. With what disk will you replace your problematic one? I can only recommend from my personal experience the Transcend disk I mentioned earlier. You may also search this forum on other brands of disks that may also work.
Regards.

Optimized sql not properly generated when using SAP tables

Hi Experts
We are using BODS 4.1 sp2.
We have a simple dataflow where we pull data from SAP r3 using direct download and push it in our database.
Basically its like this:
SAP Table-->Query Transform-->Oracle Database
Inside query transform,we have applied some conditions in where clause,which are combinations of 'or' and 'and' operator.
However when we are generating optimized SQL for the same,we observe that the conditions in where clause are not being included in the optimized query.
But if we replace all conditions by only 'or' or by only 'and' condition,the optimized sql query with condition is generated.
Somehow the optimized sql with conditions is not generated if where clause has mixer of 'and' and 'or' conditions.
The issue is only observerd for SAP Tables
However the same dataflow in bods 4.0,generates an optimized sql containing the mixed conditions of 'and' and 'or' in where clause.
Please help me on this.

Dear Shiva
We e
Let me explain this in detail to you:
We have a simple dataflow where we push data from the sap table directly into our oracle database.
The dataflow has a query transform where we have some conditions to filter the data.
The method used to pull data from R3 is direct download.
System Used:
BODS 4.2 SP1
SAP R3 620 release(4.7)
The where clause has mixed 'and' and 'or' operators.The problem is that this where clause is not getting pushed in the Optimized sql.
Eg: Table1.feild1=some value and Table1.feild2=some value or Table1.feild3=some value.
If this is the condition in where clause,the where clause does not appear in optimized sql.
Also the condition in where clause is from same table.
However if all the condition in where clause are either all 'and' or either all 'or',the condition gets pushed and appears in optimized sql.
But if their is mixed 'and' and 'or' it fails.
The same was not the case when we used BODS 4.0 with R3 620(4.7).
We investigated further and used R3 730 with BODS 4.2.With R3 720,we the where condition was getting pushed into optimized sql for mixed 'and' 'or' predicated.
SAP support too confirmed the same.They were able to reproduce the issue.
We will use ABAP dataflow and see if if resolves the issue.
Regards
Ankit

Cuts off leading zeros in a report column when "Download to Excel" function

Hello
When a text column contains leading zeros for example "000250" the download to Excel stores the string as "250" in the spreadsheet. I am using a column which is a string.(varchar)
Can somebody suggest me , how to go ahead with it
Thanks
Edited by: user647228 on Sep 11, 2008 1:40 PM
Edited by: user647228 on Sep 11, 2008 1:42 PM

(To Vins) Actually, concatenating a space doesn't do it. When the file is downloaded into Excel, the leading space is ignored and it the leading zeroes are still trimmed.
To user647228: A non-space character needs to be concatenated. Regarding what character to append, I would give the following consideration: If the users are content with seeing an added character to the "number," you can append say an underscore "_" and Excel will download the number properly. It's fairly unobtrusive and can be "visually ignored."
If the end user insists on gettin rid of the extra character once the file is downloaded, I would append a character that is rarely, if not never, used in the report. (This ensures or mitigates replacing other instances of the character.) Then you can do a Replace All in Excel to replace the extra character with a single apostrophe. The single apostrophe will be interpreted by Excel to mean "text" and the appearance will change to exactly what is desired.
Note: Replacing the extraneous character with a space for example, will result in the leading zeroes being again lopped off by Excel...

PO history report when downloaded in excel it truncates last digit of vendo

Hi,
We have a customized report developed for PO history.When executed ,it displays the report.However when we transport that to excel spreadsheet,surprisingly the vendor number gets truncated at the last meaning the last digit of the vendor number doesnot show up.
However in Quality,when downloaded,it looks perfectly okay.
What could be the possibility.
Please suggest
Thanks in advance
MB

HI,
Let me share my experience regarding your situation. Last time I like to download reports from SAP to spreadsheet, however, the result not satisfy. What I did, download first using HTML format then from this file, I opened with excel and save it in excel format. As result the perfect report came out, my advice please try what I have done before.
Hope this help
Mahnansa

Y-axis Does not show values when exported to excel

Hi,
We are facing trouble while showing Y-axis values when report is exported to excel. On report Y-axis is shown properly however when we export it to excel only 1 value is shown with arrow mark(=>).
If we will right click Y axis, we can see all data exported in "Select Data". If we select Y-axis, and change axis properties to automatic, we can see Y-axis values on excel.
Now, is there any property setting which will show all the data on Y-axis instead of showing up single value with arrow?

Thanks for your reply. I tried it closing all sheets and exporting, however result doesn't change. There is an aggregate table we are querying to which holds almost 20k records. Right now I have observed this with 3 reports. In one of the report I am using Horizontal chart. In that report there is issue with X-axis.
e.g.
Band
1000<= |
             |
             |________________________________
              A                     B                  C                D

Title Tool not updating / saving when making revisions

I've made a few Title's in Premiere Pro and saved them as templates to use through out my production. With CS6 I'm having some issues with it. I'll create a new Title file from a template and make the chages. Everything works fine for a while, but then the changes I make within the title tool do not save after exiting the title tool. The text just reverts back to the point were it stopped working. If I restart Premiere it works again, but only for a while. I think this is a bug, but if anybody has a solution please let me know. Thanks

Wow, with so many reporting similar, there must be something to it, but I have just never encountered it, and I do tons of Titles. The changes always update instantly for me.
Maybe state the Sequence Settings, where this is happening, and where your Title appears (Video Track), relative to other Clips?
I cannot help but think that this is Sequence, or Project specific, and that is why many others have never encountered it.
Good luck,
Hunt

Classic Report - Column Conditions Not taking Effect when Changing Pagination

Apex Version: 4.2.1.00.08
DB Version: 11g Release 11.2.0.3.0
Hi,
I have a classic report that has some columns that conditional hide/show depending upon the value of a page item. When the report is first displayed with the first pagination set(Rows 1-100), the columns display as they should.
When moving to the next pagination set(Rows 101-200), the columns no longer display as they should and it seems that the condition is not taking effect. Partial Page Refresh is set to 'Yes' for the report.
Any ideas on why this might be occurring?

tvanderl
Assuming you mean that columns are rendered while you expect them not to.
Are the conditions based on page items.
It could be that the session state of those items is different between when the page is first rendered and when de refresh due to the pagination is done.
See if adding the in the condition used page items to the page items to be submitted for the region helps.
Others wise see if you can replicate the issue on apex.oracle.com so we can see what you mean.
Nicolette

Logo seen in report Title is not properly alligned when downloaded to Excel

Similar Messages

Maybe you are looking for