Logo stored as a text.... print in Smartforms

Hello Colleagues,
My problem is the following:
I have a logo stored as Standard text and I want to print it with Smartforms.
When I create a Window-> Text node (Include Text), and i write the information of my logo....... the proble is that the result (print out) is not the logo.. instead I get letters:
FFSDSDSDSd
SDSDSDSDD
DFGHFHFHFH
The problem is that with smartforms it´s posible to include graphics BMAP, J7L..... but i don´t know how to include a logo stored as Standard Text.
Could you help me???
Or my unique option is to upoload the logo SE78 as BMAP????
Thanks,
Alfonso.

In Smartforms you can't use the standard text for the logo purpose. You have to upload the BMP file thru SE78 as graphics image and then create a graphic node in your smartform. Include the one you have uploaded. In fact I was also facing the same problem. But I have to stick to the later solution.
Hope this helps you, If yes please reward the points.
Regards,
Prem

Similar Messages

How to output a logo stored as standard text to excel using OLE

Hi Experts,
I have a requirement to write a program which creates an excel spreadsheet to download data from SAP. The client would like the spreadsheet formatted with merged cells, background colours, different size fonts and in the top left corner of the spreadsheet to show their logo.
They have similar functionality in another report, however, this requires a template (containing all of the formatting) to be stored on the user's PC. They do not want to have to do this with the new download.
After checking the many postings on this forum I have worked out how to do most of the requirements, but as yet have still not been able to work out how to populate their logo to the spreadsheet. They already have their logo stored as standard text (SO10), so would prefer to use this if possible.
Any advise and/or sample code would ge greatly appreciated.
Thanks
Sandra

Hi Surendra,
We have the same requirement. We want to do some format changes to "Generic FSG Drill Template". I am able to do few changes. But when we run the report, we are able to see PDF, html output. But 'Exce' report comes with blank. Can you help on this. How were you able to see logo in excel file.
Can you send the suggestions if any to my mail ([email protected])
Thanks in advance.
Thanks,
Techie.
Edited by: user1138068 on May 30, 2011 7:04 AM

Vertical text print in smartforms

Hi Experts,
I want to print text vertically in smartforms.
Can any one tell me how to do that.
Thanks in advance
Dhananjay

hi
good
i dont think there is any option to print the data vertically in smartform.
thanks
mrutyun^

Text printing in smartforms

Hi All,
My smartform has 3 pages namely FIRST, NEXT and TERMS.
I have 2 texts ( T1 and T2) to be printed on the smartforms. These texts are defined only in the first and the next pages.
The condition is that these 2 texts(T1 and T2) should be printed only till the 3rd last page and in the second last page only one text( T2) needs to be printed.
For example if there are 5 pages in a smartform then T1 and T2 both should be printed till page 3 and then T2 only should be printed on page 4.
I am trying to use the logic by comparing the values of sfsy-jobpages and sfsy-page but at runtime they are having the same values depending on the page the cursor is there.
Plz help me out to achieve this.

hi
program lines is a node that we can insert in a loop within a window...you can code any logic just like in a normal abap program..so, you could do something like this
DATA: page1 type i, page2 type i, totalpage type i.
--->in your first page
totalpage = &sfsy-formpages&
page1 = &sfsy-page&
if page1 < ( totalpage - 2 )
write: T1, T2.
endif.
-->in your second page
totalpage = &sfsy-formpages&
page1 = &sfsy-page&
if page1 < ( totalpage - 2 )
write: T1, T2.
endif.
if page1 = totalpage - 1.
write T2.
endif.
if helpful, reward
Sathish. R

Re : Problem in arabic text printing in smartforms

Hi,
In smartforms I am printing arabic text. Its coming correct up to the variable. But while printing Each and every word having space. How to avoid this space between thw arabic words while printing.
Regards
Anto

When I export a SWF containing Arabic Text from Flash, I get
no errors and everything is ok. The problem occur when I compile a
SWF from Flex Builder, I'm using FP 9 for both files

Printing chinese text in a smartform.

Whenever, I try to write chinese text in the smrtform, some weird characters appear. How can I paste chinese text in the smartform. Please provide me a solution.
Moderator message: please do some research before asking.
[Rules of engagement|http://wiki.sdn.sap.com/wiki/display/HOME/RulesofEngagement]
Edited by: Thomas Zloch on Feb 28, 2011 9:21 AM

Please check with your basis that your output device support print Chinese character. Or, you can search more in forum, there are a lot of threads about print Chinese and other Unicode characters in form.
Thanks,

Ukrainian text on preview is fine but gives junk char on print in smartform

HI All,
I am trying to print hardcoded ukrainian text in smartform. In preview it is coming correctly but while printing it gives some junk charecters.
During my analysis i found out that previously existing hardcoded text is coming fine on printing but it is showing different charecters(than the one on the printing) in smartform node and in print preview.
Regards,

Hi,
Do you use a device type that supports Cyrillic characters to create the spool and print? e.g. Device type SAPWIN, SAPWIN5 or Unicode device type SWINCF?
If you use a non-Unicode device type like SAPWIN or SAPWIN5, then the font used for these characters in the smartform should be a Cyrillioc font like COURCYR, HELVCYR or TIMECYR.
Regards,
Aidan

Lable printing in smartform

Dear All,
I am working at Lable Printing Smartform of material Document. in which when i pass material document range in SF program then generate page accourding maetrial document.
Exmple:
i pass range in program............
Material Document : 460 to 465
then create 6 page in output.
But
i want print lable on one page and if page don't have space then print on next page........
print Tab Lable in Horizotal and vertical Both .....
Example:
Lable 1   Lable2   Lable3
Lable4   Lable5   Lable6
plz guide me.......................

Start SO10.
enter some names and CREATE.
Then INSERT--> GRAPHICS (the blue menu upside)
There you have 2 tabs.
Stored on ducmentserver (i think that is the same as SE78)
I used the second tab. Stored as text (it really works)
You can import your graphics there.
There is also another way for you. I have only a example description in dutch
so i will do it very short in English
save your logo in TIFF format (with eg. MS photo editor)
use:
3.     SE38 / RSTXLDMC
     File     D:/Wou/LOGO
     Type (BMON=z/w,BCOL=kleur)     BMON
     Textname     ZHEX-MACRO- LOGO
     Textt-ID     ST
     Text language     NL
     Texttitle     blablabla
     Line length for text     132
     number of greytones (2,4,9)     2
4.     In sapscript
     Create new window     type CONST
     /: INCLUDE 'ZHEX-MACRO-LOGO' OBJECT TEXT ID ST LANGUAGE 'NL'.
                             Please note that if object name is not indicated as 'ZHEX...', the logo may not be printed!
If you need more info don't hesitate to contact
Gr. Frank

Zebra printing for smartforms

Hi
SAP version ecc6.0
I want to roate a single text on the lable by 270 degrees. I have searched this forum and came to know about including a print control. therfore for the device type lzeb2( 200 dpi print head) created a print control z270 with the following A0BFD.
description of the command
Description The ^A command specifies the font to use in a text field. ^A designates the
font for the current ^FD statement or field. The font specified by ^A is used only once for that
^FD entry. If a value for ^A is not specified again, the default ^CF font is used for the next
^FD entry.
Format ^Afo,h,w
This table identifies the parameters for this format:
Important u2022 Parameter f is required. If f is omitted it defaults to the last value of the ^CF
command.
Command Details
f = font name Accepted Values: A through Z, and 0 to 9
Any font in the printer (downloaded, EPROM, stored fonts, fonts A
through Z and 0 to 9).
o = field orientation Accepted Values:
N = normal
R = rotated 90 degrees (clockwise)
I = inverted 180 degrees
B = read from bottom up, 270 degrees
Default Value: the last accepted ^FW value or the ^FW default
^FD means field data
my questions
Do i have have to create a print control for 300 dpi printer or is there a differenet universal solution?
secondly with ^A i specify the type of font i use....i simply don't wont to be concerned with the type of font? I want to use what is used in the smartform?
thirdly the text to be printed it as the right hand side of the label so in order to see that the text gets printed i have to create
which simply exceeds the length of the label length, but it achieves the rotation and the printing is within the label itself...strange
do you guys have any alternative solution / recommendations
thanks
Sachin

correction for the below text in the thread
"thirdly the text to be printed it as the right hand side of the label so in order to see that the text gets printed i have to create
which simply exceeds the length of the label length, but it achieves the rotation and the printing is within the label itself...strange"
thirdly the text to be printed it as the right hand side of the label so in order to see that the text gets printed , i create a window
that is horizontal but exceeds the length of the lable, but usiing the aforementioned command prints the text roated by 270 degress and within the label, so the text printed is within the label.
I find it strange

Using read text fm in smartforms

hi experts,
              I have captured a text using Read_text Fm .now i need to use it inside a smartforms .how to do .
i have used that code inside a program line .
and in text i have called the field.
declaration in form interface
text type char20
itab type tline
in program lines
data itab like TLINE occurs 0 with header line.
CALL FUNCTION 'READ_TEXT'
EXPORTING
* CLIENT                        = SY-MANDT
    id                            = '0001'
    language                      = 'E'
    name                          = '0080000055'
    object                        = 'VBBK'
ARCHIVE_HANDLE                = 0
LOCAL_CAT                     = ' '
IMPORTING
HEADER                        =
tables
    lines                         = itab.
LOOP AT ITAB.
text = ITAB-TDLINE.
ENDLOOP.
in text
&text&
but the text value is not printing .but i am getting the value when i do it in SE38.
what shall i do?
regards,
mani

Hi ,
    Instead of using the FM, Use the standard functionality to print the required text provided by Smartforms.
Create a text element, in the left top...in the drop down there is an option of include text...
id = '0001'
language = 'E'
name = '0080000055'
object = 'VBBK'
u will get the dessired output
Regards,
Himanshu

Issue with character formats using duplex printing in smartform

Hi all,
I am getting a problem with character formats using duplex printing in smartform. I am using a text module with a bold character to display text in a window. The problem is that on the first back page,the text is being printed normally (without bold), but on the next pages, the back pages are being printed with the bold character format.
Can anyone know where is the problem..please.
Points to be rewarded..
Thanks.
Regards,
Zaheed.

Hi Zaheed,
Normally this should not happen.. and also there is no internal formatting done by SAP.. it will show based on what fomatting option we have specified..
If you are saying it is happening in ur case then
     1. Recheck whether whether you have same text module getting printed on the
         two page. If they are different then then individual check formatting option for
         each..
      2. If above point does'nt work for you ..then instead of bold char use normal
          format for text element and see if it is printing same on both page..
Try this out and let us know your findings...
Enjoy SAP.
Pankaj Singh

Standard text from SO10 - smartform

Hi Folks,
I need to print a document with some standard text and the vendor address.
1.For this I had created the standard text in S010,how to call this standard text in the text editor of the main window?
This standard text will be the same for all the vendors.
2.I need to fetch the address of the vendor.So I had created a select option.I have to print this document with the standard text for each vendor.Text will remain the same but the vendor address differs.I had created a structure having all the fields for the address and declared in the form interface.Internal table is getting populated but it is not printing in the smartform.
How to get the document in one shot for all the vendors given in the range.
Thanks,
K.Kiran.

u can call the standrd text from the smartform directly :
got the smarform u created/ developed.
create text.
in the general attributes tab give the type <Include Text>
assign the standard text that u want ot inclue.
smartform will call that directly
address cn be created direclty from the smartform
in creation u will the get the option to create the address.
just give th varible and populate the varible from the program.
Thanks

Japanese Kanji is not printing in SMARTFORM eventhough it is showing in PP

Hi All,
I have a very peculier problem with smart form. When we are trying to print Quotation and Sales Order seperately in the SAME printer Kanji data(Material description VBAP-ARKTX) is not getting printed for Sales Order but it is printing for Quotation. This Sales Order is created with respect the same Quotation. So SO hase same materials and same descriptions. When we check print preview in both the Forms we could able to see kanji data. But when we are trying to print or even trying to download using program RSTXPDFT4 kanji description is not coming in SO but it is coming in Quotation.
only the difference we found between these smart forms is SMARTSTYLES.
For Quotation used a style with TIMES type and
For SO used a style with HELVE.
I tried to change SO style to TIMES still it didnt work..
I read in SDN reply that for style with HELVE we need to maintain font "JPMINCHO" in form.
Can anybody explain where and how to maintain this font in the form.
Thanks in advance.
Purushotham

Hi,
If you use a non unicode device type like JPSAPWIN, you need to maintain font like JPMINCHO in the smartstyle for the paragraph and character formats that are used for the Japanese texts in the smartform. You should also use a smartform with language key JA.
If you have a Unicode system and you create the spool via unicode device type SWINCF, then the font or the form language is not important. So can you try again creating the spool via device type SWINCF and check the result?
Regards,
Aidan

Text element in smartforms

Hi guys,
What is the use of text elements in smartforms? I am getting confused. For texts, we generally use text modules rite? So what is the difference between the two. Wehn am i to use text element and when am i to choose text module. Please explain me in detail
Regards,
Prem

Hi,
Text Elements (locally in form)
To include data from the form interface (data from application tables) or system data (date, time) into the text, use system fields or user-defined fields in the text When processing the form, SAP Smart Forms replaces these fields with the corresponding values
Text Modules (for reusing texts)
You can use text modules to store texts that frequently appear in your forms which is stored centrally in the system. This detaches text maintenance from form maintenance, with the result that you do not need to call the Form Builder to edit individual texts.

Arabic Printing using Smartforms

Hi Gurus,
I am trying to print arabic text using smartforms. I have set MS Word as the text editor. Arabic text is coming up correctly in the editor (Arabic font, Right-to-Left). I created a Arabic smartstyle using A_TRAD font (I also tried other arabic fonts available). Now when I try to print it on HP LasetJet printer, the arabic text is coming up as single characters rather than words and lines. Different Arabic characters are not joined together to form words, they are all single characters separate from each other. Whereas arabic text is coming up correctly in the MS Word editor. Any help would be highly appreciated!!
[email protected]

Hi There.. Greetings...
I am having the same problem of printing Arabic text in the smartform. The arabic Text is printing in opposite direction as well.
what is the solution for this?
Please help me.
Looking forward to hearing from u.
Kind regards,
shekher

Logo stored as a text.... print in Smartforms

Similar Messages

Maybe you are looking for