Logo with percent size compared with the image
Hello everyone
I want to ask if there is any way to make a script that place a logo AND the size of that logo has a specific percent size (lets say 10%)
compared with the one of the two axis of the image (lets say according to the image height).
This is because I use to crop and reframe my photos. At the end of the edit I run my logo batch and of course every logo has different size
compared with the size of the photo…
Thank you all
I want to ask if there is any way to make a script that place a logo AND the size of that logo has a specific percent size (lets say 10%) compared with the one of the two axis of the image (lets say according to the image height).
Yes.
What is giving you problems?
Similar Messages
-
My Iphone 5 suddenly turned off and there is only the Itunes logo with the usb image and arrow key. I've now connected to Itunes but it doesn't work
Have a look through this Doc
http://support.apple.com/kb/TS3281 -
Hi everyone! I tried to install the new iOs 7 on my iphone 4, but it wasn't completed (showing error 4005). Now, my iphone is stuck on the itunes' logo with the usb cord, and I can't use my phone. And itunes doesn't detect my iphone when I connect it on my computer, so I can't put it in recovery mode or someting like that... What can I do?? I tried everything they tell me to do in the apple support but nothing seems to work. Thank you!
No problem, glad to help!
Update: my PC USB hub was connected to a USB 3 port, I connected the 30 pin cable directly to my PC, And the restore worked just fine. Restored phone from iCloud backup and seems to be working fine. -
I am trying to upgrade my macbook pro to os x mavericks， but it has been on the reboot process for more than 2 hours. There is only the apple logo with the spinning ball thing. What should I do?
Hi there Candyleehoiman,
I would recommend taking a look at the troubleshooting steps found in the article below.
Mac OS X: Gray screen appears during startup
http://support.apple.com/kb/ts2570
-Griff W. -
I need help with uploading photos from iPhoto to facebook. I could do it till 2 days ago. Now any new photo I try to upload gives me an error message:
Bad Image
There was a problem with the image file.
Please help.Can you drag it to the Desktop?
-
My title and description info on my iPhoto images do not import to Aperture with the image
My title and description info on my iPhoto images do not import to Aperture 3.2 with the image. Is this just the default setting and if so, is there a way to import all the info?
Hello there, FrancesCech.
The following iPhone Troubleshooting Assistant should help with what to do with your situation:
Apple - Support - iPhone - Restore Troubleshooting Assistant
http://www.apple.com/support/iphone/assistant/restore/
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro D. -
my ipod toch 2g 3.1.3 is stuck on apple logo withe the shutdown ring after that i restore to the original settings and its not tern on plese if somone can halp my plzzzzzz
Did you already try to connect in recovery mode iPhone and iPod touch: Unable to restore or DFU mode Apple - Support - Discussions - DFU/Recovery mode
-
Creating a button that changes with the images in a slideshow in Adobe Muse?
Are you able to create a new button inside or outside of a slide show that changes with the images? I want to have the images change and contain a title and link to the project they are related to. Whenever the image changes, whether automatically or someone clicks the "Next/Previous" buttons, the button link and title will change with it.
Sorry, not sure exactly how to describe it. I have a link to a page that uses this technique:
www.roofstudio.tv
The first page ("Featured" page) contains the what I am looking for. The title of the project changes with picture but the link on the "view project" button (probably just a new button in the same location) also changes. So when the picture of project X is up the button will take you to project X's page. When it changes to the project Y picture, the link will take you to project Y's page. My problem is that I'm not sure how have my button or even the text to change. Slideshows only change pictures not buttons. Since it's a widget i can't seem to add any new buttons. Hope this is a better description of my issue. -
In the process of reformatting my macbook pro, I saved everything but my keyword list. The keywords are with the images, but the total list I use under "Keywords" is not present. Is there a way to re-create all my keywords I've used over the last 6 years.
I accomplished what I needed last night. I remembered I had picked my favorite images from each year and put them in a "favorite" folder by year. These folders included 500 to 1200 images per year. I pulled up the folder for each year and highlighted all images and clicked on "Keywords" and all keywords used for all images were listed. I made those keywords persistent. It took me a while to realize I had to click on each keyword to make it persistent. After doing this for all years, I assume 95% of all keywords I have used over the many years were back in my list. I'm sure there is probably a more "technical" way to accomplish what I needed, but this seems to have worked. I also exported my list into a word document and is saved on my hard drive.
If I had not made folders with my favorite images for each year, I could not have used this method, so if you figure out a better way, I like to hear it. Thanks for your comments and willingness to help. -
I am trying to restore my iphone but it has been stuck at the apple logo with the progress bar and it shows no signs of loading at all. What should I do?
Hello kuukua.b,
Thanks for using Apple Support Communities.
Please try to restart and reset your iPhone by following the steps below, and then resume your restore process.
Turn your iOS device off and on (restart) and reset
http://support.apple.com/kb/ht1430
Take care,
Alex H. -
I am having a problem importing my images into Aperture 3 from my Nikon D800E. The images appear as if red paint was splashed across the sky. The Nikon software used to transfer from the camera does not show this problem and Photoshop 6 is fine with the images exported as jpg from the Nikon software. Aperature does not even like the jpg images usable by Photoshop. I am suspecting that Aperture is not correctly using the camera raw file. Also, the histograms are radically different between the corrupted images and the Photoshop (good) versions. Aperture worked just fine for me in June with the same camera. All drivers and software are current as of this posting. Anyone else out there seen this before??
Are you sure you do not have Highlight Hot & Cold Areas turned on? (View->Highlight Hot & Cold Areas)?
The bug in Digital Camera raw only affected Raw images. In your first post you wrote:
Aperature does not even like the jpg images usable by Photoshop
If the JPG's have the same problem then it isn't this bug.
regards -
Is it possible to make a reflection of an image that will change with the image? [was: Reflection]
Is it possible to make a reflection of an image that will change with the image?
normfb wrote:
I believe that a Smart Object will solve your problem.
place your original image in a new file as a smart object and do the same for the reflection (made by Transforming, reducing the opacity and introducing a mild horizontal motion blur) on its own layer, then:
by double clicking on the smart object in the layers panel and returning to the original image, any change you make in the original and save, will automatically update the upright image and its reflection.
Nice one Norm. Five Kudos points to you. -
After the error occured, my phone was stuck on the apple logo with the loading bar below it. I cannot restart it because my power button is broken, and it will not be recognized on my iTunes. Any help how i can get my phone off or back to working again?! HELP PLEASE!!!
Looks like a Visit to an Apple Store or AASP (Authorized Apple Service Provider) is required...
Be sure to make an appointment first... -
Good day, please help do a manual reset on my iphone 4s. I was updating my itunes and all a sudden i discover the USB cord disconnected while updating which later show me itunes logo with the USB cord charger display since yesterday. Help me gain access back to my iphone 4s so it can start working effectively . Thanks.
http://support.apple.com/kb/ht1808
-
Can somebody help ???
iPhone 3Gs is stuck with an apple logo with the long loading bar. but iTunes popup say iPhone had been restored. This happens when upgrading iOS 4.3.3 to 4.3.4.Thanks for your answer
i've checked the host files, nothing referring to apple. The device has never been jailbroken...
Is there something else i can do?
Maybe you are looking for
-
I was working with adjusting audio in my 62 slide presentation, off the local server, had been clearing the cache, and saving as I went. After two particularly slow saves with lengthy "not responding" messages (we are talking 4-5 minutes until I rec
-
Temporarily emptying iPhone storage for video recording
Hi, Firstly, apologies if this has been asked on here before – if so, I couldn't find it, and might have been using the wrong search terms. I'm getting married soon, and rather than hire a videographer to produce something we probably won't like anyw
-
How can I revert to a previous saved file?
Hi, I have been working on Word for Mac 2011 and have been saving continuously onto the same document as my work progresses. I always reference manually and somebody suggested I use footnotes to reference. This was too problematic as I needed to refe
-
Hi Gurus, I want to hav create report for Goods receipt which has to show mat description, quantity Received, Date of GR, Rate, vendor name etc. Is there any standard report available? If not which tables I hav 2 use to create querry? Thanks
-
I just thought I'd put this out there and see if anyone else had the same anomaly. When I open Flash Cayalyst Beta 1 I get a loading screen but the program never opens. If I try again it usually opens. I am using vista 64bit. Anyone else had this pro