Logon Error when SetTableLocation with RAS SDK
Hi
I have a lot of Reports based on TTX files. As these don't work anymore in an 64 bit environment with CRVS2010 I tried to make an update program based on an replace_click sample in this newsgroup.
My program is 32 Bit (x86) on an Windows 7 with VS2010. Cr2010 SP1 (13.0.1.220) 32 and 64 Bit is installed.
After creating an XML-file I want to set the new table location with SetTableLocation method:
I always get this Error: Logon Failed. Error in File xxx.rpt: Unable to connect: incorrect log on parameters.
I tested this with two super easy reports created with Crystal Reports 10:
First: 1 Table (based on ttx) with only one String filed. no subreports.
Second: Same report based on an XML File
With Crystal Reports 10 I can update the Report with the created XML-File.
public convert(NewFilename as String)
Dim lCR As New CrystalDecisions.CrystalReports.Engine.ReportDocument
lCR = New CrystalDecisions.CrystalReports.Engine.ReportDocument
Try
lCR.Load(NewFileName)
Dim rcd As ISCDReportClientDocument
rcd = lCR.ReportClientDocument
For i As Integer = 0 To rcd.SubreportController.GetSubreportNames.Count - 1
ConvertReportTables(NewFileName, rcd, rcd.SubreportController.GetSubreportNames.Item(i), True)
Next
ConvertReportTables(NewFileName, rcd, "", False)
end sub
Jürgen
Edited by: Jürgen Bauer on Jun 7, 2011 1:55 PM
Private Sub ConvertReportTables(ByRef destination As String, ByRef lcr As ISCDReportClientDocument, srp As String, issubrpt As Boolean)
Dim boTables As CrystalDecisions.ReportAppServer.DataDefModel.ISCRTables
If issubrpt Then
boTables = lcr.SubreportController.GetSubreport(srp).DatabaseController.Database.Tables
Else
boTables = lcr.DatabaseController.Database.Tables
End If
For Each Table As CrystalDecisions.ReportAppServer.DataDefModel.ISCRTable In boTables
'Dateiname für Tabellendefinition erzeugen
Dim XMLFile As String
XMLFile = destination
XMLFile &= "_R_" & srp
XMLFile &= "_T_" & Table.Name.Trim & ".xml"
'Tabellendefinition lesen und in Datei schreiben
Dim dt As New DataTable
For Each field As CrystalDecisions.ReportAppServer.DataDefModel.Field In Table.DataFields
Dim fieldtype As String = ""
Select Case field.Type
Case FieldValueType.BitmapField, FieldValueType.BlobField, FieldValueType.IconField, FieldValueType.OleField, FieldValueType.PictureField
fieldtype = "System.Byte[]"
Case FieldValueType.BooleanField
fieldtype = "System.Boolean"
Case FieldValueType.CurrencyField, FieldValueType.NumberField
fieldtype = "System.Decimal"
Case FieldValueType.TimeField, FieldValueType.DateField, FieldValueType.DateTimeField
fieldtype = "System.DateTime"
Case FieldValueType.Int16sField, FieldValueType.Int16uField, FieldValueType.Int32sField, FieldValueType.Int32uField, FieldValueType.Int8sField, FieldValueType.Int8uField
fieldtype = "System.Int32"
Case FieldValueType.StringField
fieldtype = "System.String"
Case Else
fieldtype = "System.String"
End Select
dt.Columns.Add(New DataColumn(field.Name, Type.GetType(fieldtype)))
Next
dt.TableName = Table.QualifiedName
Dim ds As New System.Data.DataSet
ds.Tables.Add(dt)
ds.WriteXml(XMLFile, XmlWriteMode.WriteSchema)
'boMainPropertyBag: These hold the attributes of the tables ConnectionInfo object
Dim boMainPropertyBag As New PropertyBag()
'boInnerPropertyBag: These hold the attributes for the QE_LogonProperties
'In the main property bag (boMainPropertyBag)
Dim boInnerPropertyBag As New PropertyBag()
'Set the attributes for the boInnerPropertyBag
boInnerPropertyBag.Add("File Path", XMLFile)
boInnerPropertyBag.Add("Internal Connection ID", Guid.NewGuid.ToString)
'Set the attributes for the boMainPropertyBag
boMainPropertyBag.Add("Database DLL", "crdb_adoplus.dll")
boMainPropertyBag.Add("QE_DatabaseName", "")
boMainPropertyBag.Add("QE_DatabaseType", "ADO.NET (XML)")
'Add the QE_LogonProperties we set in the boInnerPropertyBag Object
boMainPropertyBag.Add("QE_LogonProperties", boInnerPropertyBag)
boMainPropertyBag.Add("QE_ServerDescription", "NewDataSet")
boMainPropertyBag.Add("QE_SQLDB", "False")
boMainPropertyBag.Add("SSO Enabled", "False")
'Create a new ConnectionInfo object
Dim boConnectionInfo As New CrystalDecisions.ReportAppServer.DataDefModel.ConnectionInfo()
'Pass the database properties to a connection info object
boConnectionInfo.Attributes = boMainPropertyBag
'Set the connection kind
boConnectionInfo.Kind = CrConnectionInfoKindEnum.crConnectionInfoKindCRQE
Dim boTable As CrystalDecisions.ReportAppServer.DataDefModel.ISCRTable
boTable = Table.Clone(True)
boTable.ConnectionInfo = boConnectionInfo
Try
If issubrpt Then
lcr.SubreportController.GetSubreport(srp).DatabaseController.SetTableLocation(Table, boTable)
lcr.VerifyDatabase()
Else
lcr.DatabaseController.SetTableLocationEx(Table, boTable)
lcr.VerifyDatabase()
End If
Catch ex As Exception
MsgBox(ex.Message)
End Try
Next
End Sub
Similar Messages
-
Pragma error when compiling with SDK X
Hi,
I am trying to compile my plugin application (which compiled fine with the previous sdk) using the SDK X, but receive errors in CAVAlert.h on the exception handler construct DURING, HANDLER, END_HANDLER.
The errors are listed here:
Headers/API/CAVAlert.h:156:3: error: 'suppress' was not declared in this scope
Headers/API/CAVAlert.h:156:3: error: 'warning' was not declared in this scope
Headers/API/CAVAlert.h:156:3: error: '__pragma' was not declared in this scope
Headers/API/CAVAlert.h:156:3: error: expected ';' before 'jmp_buf'
Headers/API/CAVAlert.h:156:3: error: 'ASException' was not declared in this scope
Headers/API/CAVAlert.h:156:3: error: expected ')' before ':' token
Headers/API/CAVAlert.h:156:3: error: expected ';' before 'struct'
Headers/API/CAVAlert.h:162:3: error: request for member 'E_RETURNOutsideDURINGBlock' in 'gBadReturnCatcher', which is of non-class type 'int'
Headers/API/CAVAlert.h:162:3: error: expected ')' before ':' token
Headers/API/CAVAlert.h:162:3: error: expected ';' before 'int'
Headers/API/CAVAlert.h:165:3: error: 'ENDHANDLEROutsideHANDLER' was not declared in this scope
To compile against to SDK X all I did was:
1) Used PIMain.c from the SDK X API directory.
2) Changed ACRO_SDK_LEVEL=0x00090000 => ACRO_SDK_LEVEL=0x000A0000
3) Changed the include directories to point to the new SDK X directories
Is there another directive I must add to get the plugin to compile with SDK X?
My preprocessor list is as follows:
ACRO_SDK_LEVEL=0x000A0000
HAVE_W32API_H
PDMETADATA_HFT=1
PLUGIN=1
WIN32
WIN_ENV
WIN_PLATFORM
WXUSINGDLL
_CRT_SECURE_NO_DEPRECATE
_DEBUG
_WINDOWS
__GNUWIN32__
__WIN32__
__WXMSW__
Thank you,
MagdaWithout seeing your code, I can't really help.
If you want help with your code, open a formal support ticket.
From: Adobe Forums <[email protected]<mailto:[email protected]>>
Reply-To: "[email protected]<mailto:[email protected]>" <[email protected]<mailto:[email protected]>>
Date: Tue, 6 Dec 2011 04:09:25 -0800
To: Leonard Rosenthol <[email protected]<mailto:[email protected]>>
Subject: Pragma error when compiling with SDK X
Pragma error when compiling with SDK X
created by magdakuit<http://forums.adobe.com/people/magdakuit> in Acrobat SDK - View the full discussion<http://forums.adobe.com/message/4066378#4066378 -
Error when working with TableView using JCA
Hi sdns,
I am getting an iview rutnime error when working with Tableview using JCA. Here i am putting all my code, go thorugh it and tell me if any error is there.One more thing is Usermappping and all properties are set to system object.
Now you can throught he code which is followed by error also.
<u>Java file.</u>
public class DisplayComponent extends PageProcessorComponent {
public DynPage getPage() {
return new DisplayComponentDynPage();
public static class DisplayComponentDynPage extends JSPDynPage {
private JCATviewBean bean;
public void doInitialization() {
IPortalComponentProfile profile =
((IPortalComponentRequest) getRequest())
.getComponentContext()
.getProfile();
Object o = profile.getValue("myBean");
if (o == null || !(o instanceof JCATviewBean)) {
bean = new JCATviewBean();
profile.putValue("myBean", bean);
} else {
bean = (JCATviewBean) o;
// fill your bean with data here...
IPortalComponentRequest request =
(IPortalComponentRequest) this.getRequest();
doJca(request);
public void doProcessAfterInput() throws PageException {
public void doProcessBeforeOutput() throws PageException {
this.setJspName("Report.jsp");
private IConnection getConnection(
IPortalComponentRequest request,
String alias)
throws Exception {
IConnectorGatewayService cgService =
(IConnectorGatewayService) PortalRuntime
.getRuntimeResources()
.getService(
IConnectorService.KEY);
ConnectionProperties prop =
new ConnectionProperties(
request.getLocale(),
request.getUser());
return cgService.getConnection(alias, prop);
public void doJca(IPortalComponentRequest request) {
IConnectionFactory connectionFactory = null;
IConnection client = null;
String rfm_name = "BAPI_COMPANYCODE_GETLIST";
try {
try {
// pass the request & system alias
// Change the alias to whatever the alias is for your R/3 system
client = getConnection(request, "MyIDES");
} catch (Exception e) {
System.out.println(
"Couldn't establish a connection with a target system.");
return;
Start Interaction
IInteraction interaction = client.createInteractionEx();
IInteractionSpec interactionSpec =
interaction.getInteractionSpec();
interactionSpec.setPropertyValue("Name", rfm_name);
CCI api only has one datatype: Record
RecordFactory recordFactory = interaction.getRecordFactory();
MappedRecord importParams =
recordFactory.createMappedRecord(
"CONTAINER_OF_IMPORT_PARAMS");
IFunctionsMetaData functionsMetaData =
client.getFunctionsMetaData();
IFunction function = functionsMetaData.getFunction(rfm_name);
if (function == null) {
System.out.println(
"Couldn't find " + rfm_name + " in a target system.");
return;
How to invoke Function modules
System.out.println("Invoking... " + function.getName());
MappedRecord exportParams =
(MappedRecord) interaction.execute(
interactionSpec,
importParams);
How to get structure values
IRecord exportStructure = (IRecord) exportParams.get("RETURN");
String columnOne = exportStructure.getString("TYPE");
String columnTwo = exportStructure.getString("CODE");
String columnThree = exportStructure.getString("MESSAGE");
System.out.println(" RETURN-TYPE = " + columnOne);
System.out.println(" RETURN-CODE = " + columnTwo);
System.out.println(" RETURN-MESSAGE =" + columnThree);
How to get table values
IRecordSet exportTable =
(IRecordSet) exportParams.get("COMPANYCODE_LIST");
exportTable.beforeFirst();
// Moves the cursor before the first row.
while (exportTable.next()) {
String column_1 = exportTable.getString("COMP_CODE");
String column_2 = exportTable.getString("COMP_NAME");
System.out.println(
" COMPANYCODE_LIST-COMP_CODE = " + column_1);
System.out.println(
" COMPANYCODE_LIST-COMP_NAME = " + column_2);
// create the tableview mode in the bean
bean.createData(exportTable);
Closing the connection
client.close();
} catch (ConnectorException e) {
// app.putValue("error", e);
System.out.println("Caught an exception: \n" + e);
} catch (Exception e) {
System.out.println("Caught an exception: \n" + e);
<u>Bena file</u>
package com.sap.JCA.bean;
import java.util.Vector;
import com.sapportals.connector.execution.structures.IRecordSet;
import com.sapportals.htmlb.table.DefaultTableViewModel;
import com.sapportals.htmlb.table.TableViewModel;
public class JCATviewBean {
public DefaultTableViewModel model;
public TableViewModel getModel() {
return this.model;
public void setModel(DefaultTableViewModel model) {
this.model = model;
public void createData(IRecordSet table) {
// this is your column names
Vector column = new Vector();
column.addElement("Company Code");
column.addElement("Company Name");
// all this logic is for the data part.
Vector rVector = new Vector();
try {
table.beforeFirst();
while (table.next()) {
Vector data = new Vector();
data.addElement(table.getString("COMP_CODE"));
data.addElement(table.getString("COMP_NAME"));
rVector.addElement(data);
} catch (Exception e) {
e.printStackTrace();
// this is where you create the model
this.setModel(new DefaultTableViewModel(rVector, column));
<b>JSP File:</b>
<%@ taglib uri="tagLib" prefix="hbj" %>
<jsp:useBean id="myBean" scope="application" class="com.sap.JCA.bean.JCATviewBean" />
<hbj:content id="myContext" >
<hbj:page title="PageTitle">
<hbj:form id="myFormId" >
<br>
<hbj:textView id = "tv1" text = "<b>TableView Example Using JCA</b> <br>"/>
<hbj:tableView
id="myTableView1"
model="myBean.model"
design="ALTERNATING"
headerVisible="true"
footerVisible="true"
fillUpEmptyRows="true"
navigationMode="BYLINE"
selectionMode="MULTISELECT"
headerText="TableView example1"
visibleFirstRow="1"
visibleRowCount="30"
width="500 px"
/>
</hbj:form>
</hbj:page>
</hbj:content>
<b>Error when Executing this component:</b><u></u>
Portal Runtime Error
<b>An exception occurred while processing a request for :
iView : N/A
Component Name : N/A
com/sapportals/portal/htmlb/page/PageProcessorComponent.
Exception id: 12:21_28/10/05_0173_94105150
See the details for the exception ID in the log file</b>
If anybody find the error please reply to this post.
Regards,
sireesha.Thanks for your response Martin,
I have already seen the log file but im couldn't findout anything from that since it is so long here im putting some part of please see this.if u able to find it clarify me,
<b>Here the log file:</b>
1.5#001321FD6213005D0000907100001CB000040419258FBF4E#1130405957843#trexr3.com.sapmarkets.isa.services.schedulerservice.persistence.jdo.DataBaseJobStore#sap.com/crm.trexr3#trexr3.com.sapmarkets.isa.services.schedulerservice.persistence.jdo.DataBaseJobStore#J2EE_ADMIN#530##obtdev3_O09_94105150#Guest#8a2bbd20444711da932c001321fd6213#Thread[SchedulerThread,5,SAPEngine_Application_Thread[impl:3]_Group]##0#0#Info#1#/System/Scheduler/JobStore#Plain###With in the acquireLockForNextAvailableJob DataStore#
#1.5#001321FD6213005D0000907200001CB00004041925916735#1130405957953#trexr3.com.sapmarkets.isa.services.schedulerservice.SchedulerThread#sap.com/crm.trexr3#trexr3.com.sapmarkets.isa.services.schedulerservice.SchedulerThread#J2EE_ADMIN#530##obtdev3_O09_94105150#Guest#8a2bbd20444711da932c001321fd6213#Thread[SchedulerThread,5,SAPEngine_Application_Thread[impl:3]_Group]##0#0#Info#1#/System/Scheduler#Plain###Acquired the job null#
#1.5#001321FD6213005D0000907300001CB0000404192591688D#1130405957953#trexr3.com.sapmarkets.isa.services.schedulerservice.SchedulerThread#sap.com/crm.trexr3#trexr3.com.sapmarkets.isa.services.schedulerservice.SchedulerThread#J2EE_ADMIN#530##obtdev3_O09_94105150#Guest#8a2bbd20444711da932c001321fd6213#Thread[SchedulerThread,5,SAPEngine_Application_Thread[impl:3]_Group]##0#0#Info#1#/System/Scheduler#Plain###Did not find any job.So, Waiting for sometime for the next job#
#1.5#001321FD621300650000120E00001CB00004041925C953D7#1130405961625#com.sap.aii.af.sample.adapter.ra.SPIManagedConnectionFactory##com.sap.aii.af.sample.adapter.ra.SPIManagedConnectionFactory.XIManagedConnectionFactoryController.run()######04d7f690469311da8d52001321fd6213#Thread[Thread-114,5,SAPEngine_System_Thread[impl:5]_Group]##0#0#Debug#1#/Applications/ExchangeInfrastructure/AdapterFramework/ThirdPartyRoot/comsap/Server/Adapter Framework#Java###MCF with GUID is running. (,)#3#964bfca0444711dabb51001321fd6213#com.sap.engine.services.deploy.server.ApplicationLoader@1586c77#964bfca0444711dabb51001321fd6213#
#1.5#001321FD6213005D0000907400001CB000040419275B24FC#1130405987953#trexr3.com.sapmarkets.isa.services.schedulerservice.SchedulerThread#sap.com/crm.trexr3#trexr3.com.sapmarkets.isa.services.schedulerservice.SchedulerThread#J2EE_ADMIN#530##obtdev3_O09_94105150#Guest#8a2bbd20444711da932c001321fd6213#Thread[SchedulerThread,5,SAPEngine_Application_Thread[impl:3]_Group]##0#0#Info#1#/System/Scheduler#Plain###within the infinite of the Scheduler Thread#
#1.5#001321FD6213005D0000907500001CB000040419275B25D9#1130405987953#trexr3.com.sapmarkets.isa.services.schedulerservice.persistence.jdo.DataBaseJobStore#sap.com/crm.trexr3#trexr3.com.sapmarkets.isa.services.schedulerservice.persistence.jdo.DataBaseJobStore#J2EE_ADMIN#530##obtdev3_O09_94105150#Guest#8a2bbd20444711da932c001321fd6213#Thread[SchedulerThread,5,SAPEngine_Application_Thread[impl:3]_Group]##0#0#Info#1#/System/Scheduler/JobStore#Plain###With in the acquireLockForNextAvailableJob DataStore#
#1.5#001321FD6213005D0000907600001CB000040419275B2E27#1130405987953#trexr3.com.sapmarkets.isa.services.schedulerservice.SchedulerThread#sap.com/crm.trexr3#trexr3.com.sapmarkets.isa.services.schedulerservice.SchedulerThread#J2EE_ADMIN#530##obtdev3_O09_94105150#Guest#8a2bbd20444711da932c001321fd6213#Thread[SchedulerThread,5,SAPEngine_Application_Thread[impl:3]_Group]##0#0#Info#1#/System/Scheduler#Plain###Acquired the job null#
#1.5#001321FD6213005D0000907700001CB000040419275B2EFA#1130405987953#trexr3.com.sapmarkets.isa.services.schedulerservice.SchedulerThread#sap.com/crm.trexr3#trexr3.com.sapmarkets.isa.services.schedulerservice.SchedulerThread#J2EE_ADMIN#530##obtdev3_O09_94105150#Guest#8a2bbd20444711da932c001321fd6213#Thread[SchedulerThread,5,SAPEngine_Application_Thread[impl:3]_Group]##0#0#Info#1#/System/Scheduler#Plain###Did not find any job.So, Waiting for sometime for the next job#
#1.5#001321FD6213005D0000907800001CB0000404192924ED59#1130406017953#trexr3.com.sapmarkets.isa.services.schedulerservice.SchedulerThread#sap.com/crm.trexr3#trexr3.com.sapmarkets.isa.services.schedulerservice.SchedulerThread#J2EE_ADMIN#530##obtdev3_O09_94105150#Guest#8a2bbd20444711da932c001321fd6213#Thread[SchedulerThread,5,SAPEngine_Application_Thread[impl:3]_Group]##0#0#Info#1#/System/Scheduler#Plain###within the infinite of the Scheduler Thread#
#1.5#001321FD6213005D0000907900001CB0000404192924EE36#1130406017953#trexr3.com.sapmarkets.isa.services.schedulerservice.persistence.jdo.DataBaseJobStore#sap.com/crm.trexr3#trexr3.com.sapmarkets.isa.services.schedulerservice.persistence.jdo.DataBaseJobStore#J2EE_ADMIN#530##obtdev3_O09_94105150#Guest#8a2bbd20444711da932c001321fd6213#Thread[SchedulerThread,5,SAPEngine_Application_Thread[impl:3]_Group]##0#0#Info#1#/System/Scheduler/JobStore#Plain###With in the acquireLockForNextAvailableJob DataStore#
#1.5#001321FD6213005D0000907A00001CB0000404192924F652#1130406017953#trexr3.com.sapmarkets.isa.services.schedulerservice.SchedulerThread#sap.com/crm.trexr3#trexr3.com.sapmarkets.isa.services.schedulerservice.SchedulerThread#J2EE_ADMIN#530##obtdev3_O09_94105150#Guest#8a2bbd20444711da932c001321fd6213#Thread[SchedulerThread,5,SAPEngine_Application_Thread[impl:3]_Group]##0#0#Info#1#/System/Scheduler#Plain###Acquired the job null#
#1.5#001321FD6213005D0000907B00001CB0000404192924F710#1130406017953#trexr3.com.sapmarkets.isa.services.schedulerservice.SchedulerThread#sap.com/crm.trexr3#trexr3.com.sapmarkets.isa.services.schedulerservice.SchedulerThread#J2EE_ADMIN#530##obtdev3_O09_94105150#Guest#8a2bbd20444711da932c001321fd6213#Thread[SchedulerThread,5,SAPEngine_Application_Thread[impl:3]_Group]##0#0#Info#1#/System/Scheduler#Plain###Did not find any job.So, Waiting for sometime for the next job#
#1.5#001321FD621300650000120F00001CB000040419295CCD8B#1130406021625#com.sap.aii.af.sample.adapter.ra.SPIManagedConnectionFactory##com.sap.aii.af.sample.adapter.ra.SPIManagedConnectionFactory.XIManagedConnectionFactoryController.run()######04d7f690469311da8d52001321fd6213#Thread[Thread-114,5,SAPEngine_System_Thread[impl:5]_Group]##0#0#Debug#1#/Applications/ExchangeInfrastructure/AdapterFramework/ThirdPartyRoot/comsap/Server/Adapter Framework#Java###MCF with GUID is running. (,)#3#964bfca0444711dabb51001321fd6213#com.sap.engine.services.deploy.server.ApplicationLoader@1586c77#964bfca0444711dabb51001321fd6213#
#1.5#001321FD6213005D0000907C00001CB0000404192AEEB1E2#1130406047953#trexr3.com.sapmarkets.isa.services.schedulerservice.SchedulerThread#sap.com/crm.trexr3#trexr3.com.sapmarkets.isa.services.schedulerservice.SchedulerThread#J2EE_ADMIN#530##obtdev3_O09_94105150#Guest#8a2bbd20444711da932c001321fd6213#Thread[SchedulerThread,5,SAPEngine_Application_Thread[impl:3]_Group]##0#0#Info#1#/System/Scheduler#Plain###within the infinite of the Scheduler Thread#
#1.5#001321FD6213005D0000907D00001CB0000404192AEEB2C0#1130406047953#trexr3.com.sapmarkets.isa.services.schedulerservice.persistence.jdo.DataBaseJobStore#sap.com/crm.trexr3#trexr3.com.sapmarkets.isa.services.schedulerservice.persistence.jdo.DataBaseJobStore#J2EE_ADMIN#530##obtdev3_O09_94105150#Guest#8a2bbd20444711da932c001321fd6213#Thread[SchedulerThread,5,SAPEngine_Application_Thread[impl:3]_Group]##0#0#Info#1#/System/Scheduler/JobStore#Plain###With in the acquireLockForNextAvailableJob DataStore#
#1.5#001321FD6213005D0000907E00001CB0000404192AEEBAD8#1130406047968#trexr3.com.sapmarkets.isa.services.schedulerservice.SchedulerThread#sap.com/crm.trexr3#trexr3.com.sapmarkets.isa.services.schedulerservice.SchedulerThread#J2EE_ADMIN#530##obtdev3_O09_94105150#Guest#8a2bbd20444711da932c001321fd6213#Thread[SchedulerThread,5,SAPEngine_Application_Thread[impl:3]_Group]##0#0#Info#1#/System/Scheduler#Plain###Acquired the job null#
#1.5#001321FD6213005D0000907F00001CB0000404192AEEBB9E#1130406047968#trexr3.com.sapmarkets.isa.services.schedulerservice.SchedulerThread#sap.com/crm.trexr3#trexr3.com.sapmarkets.isa.services.schedulerservice.SchedulerThread#J2EE_ADMIN#530##obtdev3_O09_94105150#Guest#8a2bbd20444711da932c001321fd6213#Thread[SchedulerThread,5,SAPEngine_Application_Thread[impl:3]_Group]##0#0#Info#1#/System/Scheduler#Plain###Did not find any job.So, Waiting for sometime for the next job# -
IDoc_02_Error passing data to port-Communication error when sending with HTTP
Hello All,
We are receiving the error "02_Error passing data to port-Communication error when sending with HTTP", when sending the idoc to PI from ECC system.
Observation:
1. Some idocs are failing and immediately after sometime the same type of idocs with different idoc numbers are getting successful.
Eg: Orders. One purchase order is failing at one point of time. later another purchase order is getting successful after some time to the same partner.
2. If i perform the reset of idoc, then it is getting delivered during next scheduled job run.
please help me in resolving the issue.
Regards,
Ch. Venkat.status 02 is Error passing data to port ...it simply means your port setting has some problem. do configure your port setting and also in partner profile
Thanx and Regards
Arpan Maheshwari -
Error when running report using SDK
Hi, I am getting following error when I am running a report in boxi r2 sp3 on IIS. Infoview and CMC runs fine but SDK application is not able to connect to CMS. This error does not come all the time. It happens intermittently.
Error in RetrieveReport: Unable to connect to cluster @hisuatcluster to retrieve updated CMS member list. Logon cannot continue.
Anyone has seen this and any way to pin point the cause. We have used -ns and -port switch in the command line of CMS and all servers.
Thanks,will try that. But we would not be leveraging cluster benefit then. What happens if that particilar CMS in cluster goes down.
Below is the logic of SDK.
1. Create an EnterpriseSession by calling SessionMgr.Login(the credentials we use to connect on in the web.config file).
2. Get a reference to the InfoStore with EnterpriseSession.GetService(u201CInfoStoreu201D)
3. Get a reference to the report as an InfoObject by querying the InfoStore u2013 InfoStore.Query(u201CSELECT * FROM CI_INFOOBJECTS WHERE u2026u201D)
4. Get a reference to the RASReportFactory u2013 EnterpriseSession.GetService(u201Cu201D, u201CRASReportFactoryu201D)
5. Open the report using the InfoObject (line 3) and RASReportFactory (line 4) u2013 ReportClientDoc = ReportAppFactory.OpenDocument(InfoObject.ID, 0)
6. Manipulate the reportu2019s connection information.
7. Set the vieweru2019s report source with the report (this is commented out in the current tests) u2013 CrystalReportViewer.ReportSource = ReportClientDocument
8. Close the session u2013 EnterpriseSession.Logoff() -
Errors compiling program with RFC SDK 700 for ECC 6.0
Hi,
We are getting an error when trying to compile a program on HP_UX HP9000. We downloaded the RFC SDK for 700. The command we are using is:
cc sapsockets.c librfc.a -o sapsockets -lm -lcl +DA2.0W
The error we receive is:
ld: Unsatisfied symbol "xdr_string" in file librfc.a[cpictlib.o]
ld: Unsatisfied symbol "__nw__FUl" in file librfc.a[cpictlib.o]
ld: Unsatisfied symbol "__dl__FPv" in file librfc.a[cpictlib.o]
ld: Unsatisfied symbol "xdr_free" in file librfc.a[cpictlib.o]
ld: Unsatisfied symbol "[Vtable]key:__dt__21__versioned_type_infoFv" in file librfc.a[cpictlib.o]
ld: Unsatisfied symbol "__PureVirtualCalled" in file librfc.a[cpictlib.o]
ld: Unsatisfied symbol "__dla__FPv" in file librfc.a[cpictlib.o]
ld: Unsatisfied symbol "__nwa__FUl" in file librfc.a[cpictlib.o]
ld: Unsatisfied symbol "__ConstructMarkedArray__FPvUiUlPFv_vT4" in file librfc.a[cpictlib.o]
9 errors.
I don't have much experience in this area. Sorry I couldn't supply more information.
Any help is appreciated.
Thanks,
DomenickSee note 1056696 - Compiling and Linking RFC Programs with the SAP NW RFC SDK
HP-UX (PA-RISC, 64 bit)
aCC -DSAPonUNIX -DSAPonHPPA -DSAPwithUNICODE +DD64 -Aa +W392,829,818,887 -DSAPwithTHREADS -mt -w +O2 -DNDEBUG +inst_compiletime -c <program>.cpp
aCC -Wl,+n,-z -Wl,-a,default +DD64 -o <program> <program>.o libsapnwrfc.sl libsapucum.sl [and possibly libicudecnumber.sl]
Markus -
Setting the height of detail section with RAS SDK
Hi, all,
is it possible to locate a section (CrystalDecisions.ReportAppServer.ReportDefModel.Section) in a reportk you and set its maximum height?
When I find a detail section in question like so section = reportClientDocument.ReportDefController.ReportDefinition.DetailArea.Sections[counter];
it just gives me the height of one row.
Is there a way to set a maximum size of it?
Thank you!Hi Jelena,
see the below sample to add a new section to the report.
http://scn.sap.com/docs/DOC-6025
in the sample, see below code how the section properties are set.
//Set the properties for the section
boSection.Kind = CrystalDecisions.ReportAppServer.ReportDefModel.CrAreaSectionKindEnum.crAreaSectionKindDetail;
boSection.Name = "Detail2";
boSection.Height = 1000;
boSection.Width = 11520;
Refer to above sample and write your own code to identify the section and then set the properties.
Othe RAS SDk samples are here.
http://scn.sap.com/docs/DOC-28646
- Bhushan
Senior Engineer
SAP Active Global Support
Follow us on Twitter
Got Enhancement ideas? Try the SAP Idea Place
Getting started and moving ahead with Crystal Reports .NET applications. -
Min Mx planning report gives an error when run with RE-Stock yes.
Hi All,
We are going to implement Min Max planning for the first time.However when we test it at org level with Re-Stock parameter YES it gave an error.
what are the additional setups need to be done for it?
It works fine when running with re stock no.and gives the out put of the report accurately.
Thanks.
MPHHi Garry,
These are the parameters and error codes are also given.
P_ORG_ID='328'
P_LEVEL='1'
P_SELECTION='3'
P_CAT_SET_ID='1'
P_CATG_STRUCT_ID='101'
P_SORT='1'
P_D_CUTOFF='2009/07/03 00:00:00'
P_D_CUTOFF_REL='0'
P_S_CUTOFF='2009/07/03 00:00:00'
P_S_CUTOFF_REL='0'
P_USER_ID='5411'
P_RESTOCK='1'
P_DD_LOC_ID='32488'
P_NET_UNRSV='1'
P_NET_RSV='1'
P_NET_WIP='1'
P_INCLUDE_PO='1'
P_INCLUDE_MO='1'
P_INCLUDE_WIP='1'
P_INCLUDE_IF='1'
P_INCLUDE_NONNET='2'
P_LOT_CTL='3'
P_DISPLAY_MODE='1'
P_SHOW_DESC='2'
P_PUR_REVISION='2'
*MSG-00069: Calling INV_MMX_WRAPPER_PVT.exec_min_max from Before Report Trigger
MSG-00070: INV_MMX_WRAPPER_PVT.exec_min_max returned an error:
REP-1825: Before Report trigger returned FALSE.* -
Errors when unmarshalling with JAXB
Am getting an error when unmarshalling an xml file .....
javax.xml.bind.UnmarshalException
- with linked exception:
[org.xml.sax.SAXParseException: unexpected root element comment]
at javax.xml.bind.helpers.AbstractUnmarshallerImpl.createUnmarshalException(AbstractUnmarshallerImpl.java:298)
at com.sun.xml.bind.unmarshaller.UnmarshallerImpl.unmarshal(UnmarshallerImpl.java:146)
at javax.xml.bind.helpers.AbstractUnmarshallerImpl.unmarshal(AbstractUnmarshallerImpl.java:131)
at javax.xml.bind.helpers.AbstractUnmarshallerImpl.unmarshal(AbstractUnmarshallerImpl.java:136)
at javax.xml.bind.helpers.AbstractUnmarshallerImpl.unmarshal(AbstractUnmarshallerImpl.java:145)
at javax.xml.bind.helpers.AbstractUnmarshallerImpl.unmarshal(AbstractUnmarshallerImpl.java:163)
at PurchaseOrderClient.main(PurchaseOrderClient.java:18)
My .xsd file is like ----
<?xml version="1.0" encoding="UTF-8"?>
<xsd:schema xmlns:xsd="http://www.w3.org/2001/XMLSchema">
<xsd:element name="comment" type="xsd:string"/>
</xsd:schema>
and .xml file is ----
<?xml version="1.0" encoding="UTF-8"?>
<!--Sample XML file generated by XMLSpy v2006 sp2 U (http://www.altova.com)-->
<comment xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="C:\Projects\marshall\sample.xsd">String</comment>
Am running through stand alone java code as below ---
import generated.*;
import java.io.File;
import javax.xml.bind.JAXBContext;
import javax.xml.bind.Unmarshaller;
public class PurchaseOrderClient{
public static void main(String[] args) {
try{
JAXBContext jc = JAXBContext.newInstance("generated");
Unmarshaller unmarshaller = jc.createUnmarshaller();
Object po = null;
po = (Name)unmarshaller.unmarshal(new File("sample.xml"));
System.out.println(po.toString());
catch(Exception e)
e.printStackTrace();
plz help me out.
Aditya.Am getting an error when unmarshalling an xml file .....
javax.xml.bind.UnmarshalException
- with linked exception:
[org.xml.sax.SAXParseException: unexpected root element comment]
at javax.xml.bind.helpers.AbstractUnmarshallerImpl.createUnmarshalException(AbstractUnmarshallerImpl.java:298)
at com.sun.xml.bind.unmarshaller.UnmarshallerImpl.unmarshal(UnmarshallerImpl.java:146)
at javax.xml.bind.helpers.AbstractUnmarshallerImpl.unmarshal(AbstractUnmarshallerImpl.java:131)
at javax.xml.bind.helpers.AbstractUnmarshallerImpl.unmarshal(AbstractUnmarshallerImpl.java:136)
at javax.xml.bind.helpers.AbstractUnmarshallerImpl.unmarshal(AbstractUnmarshallerImpl.java:145)
at javax.xml.bind.helpers.AbstractUnmarshallerImpl.unmarshal(AbstractUnmarshallerImpl.java:163)
at PurchaseOrderClient.main(PurchaseOrderClient.java:18)
My .xsd file is like ----
<?xml version="1.0" encoding="UTF-8"?>
<xsd:schema xmlns:xsd="http://www.w3.org/2001/XMLSchema">
<xsd:element name="comment" type="xsd:string"/>
</xsd:schema>
and .xml file is ----
<?xml version="1.0" encoding="UTF-8"?>
<!--Sample XML file generated by XMLSpy v2006 sp2 U (http://www.altova.com)-->
<comment xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="C:\Projects\marshall\sample.xsd">String</comment>
Am running through stand alone java code as below ---
import generated.*;
import java.io.File;
import javax.xml.bind.JAXBContext;
import javax.xml.bind.Unmarshaller;
public class PurchaseOrderClient{
public static void main(String[] args) {
try{
JAXBContext jc = JAXBContext.newInstance("generated");
Unmarshaller unmarshaller = jc.createUnmarshaller();
Object po = null;
po = (Name)unmarshaller.unmarshal(new File("sample.xml"));
System.out.println(po.toString());
catch(Exception e)
e.printStackTrace();
plz help me out.
Aditya. -
SAML Sender-Vouches errors when using with OWSM
Hi,
We have configured OWSM Policy 'SAML - Verify WSS 1.0 Token' with Allow signed assertions only. We have created jks Trust store location and configured policy to refer to the file with appropriate password.
We have created proxy security to Sender-Voches signed and to sign outbound message.
We are getting following error when we try to run the proxy.
javax.xml.rpc.soap.SOAPFaultException: SAML token verification failed
at oracle.j2ee.ws.client.StreamingSender._raiseFault(StreamingSender.java:555)
at oracle.j2ee.ws.client.StreamingSender._sendImpl(StreamingSender.java:396)
at oracle.j2ee.ws.client.StreamingSender._send(StreamingSender.java:112)
at vigni4.oracle.srtutorial.datamodel.proxy.runtime.TimeServiceSoap_Stub.getTime(TimeServiceSoap_Stub.java:79)
at vigni4.oracle.srtutorial.datamodel.proxy.TimeServiceSoapClient.getTime(TimeServiceSoapClient.java:41)
at vigni4.oracle.srtutorial.datamodel.proxy.TimeServiceSoapClient.main(TimeServiceSoapClient.java:29)
Process exited with exit code 0.
and Error in gateway.log is
2007-09-01 18:58:56,561 WARNING [RMICallHandler-58] saml.VerifySAMLStep - SAML Token verification failed:
Can any provide information on how to resolve the issue?We have also noticed that correct message is reaching OWSM.
Attaching the same.
<?xml version="1.0" encoding="UTF-8" ?>
- <env:Envelope xmlns:env="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ns0="urn:Test:GetTime">
- <env:Header>
- <wsse:Security env:mustUnderstand="1" xmlns:wsse="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd" xmlns="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd" xmlns:env="http://schemas.xmlsoap.org/soap/envelope/">
<wsse:BinarySecurityToken ValueType="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-x509-token-profile-1.0#X509v3" EncodingType="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-soap-message-security-1.0#Base64Binary" wsu:Id="_FNfXFOVi1OcPKSyRUAHDyw22" xmlns:wsse="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd" xmlns="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd" xmlns:wsu="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd">MIICQjCCAasCBEbZZN4wDQYJKoZIhvcNAQEFBQAwaDELMAkGA1UEBhMCVVMxEDAOBgNVBAgTB0Zsb3JpZGExEDAOBgNVBAcTB3NhbUhvbWUxDzANBgNVBAoTBnNhbU9yZzEQMA4GA1UECxMHc2FtRGVwdDESMBAGA1UEAxMJU2FtIE1vb3JlMB4XDTA3MDkwMTEzMTA1NFoXDTA3MTEzMDEzMTA1NFowaDELMAkGA1UEBhMCVVMxEDAOBgNVBAgTB0Zsb3JpZGExEDAOBgNVBAcTB3NhbUhvbWUxDzANBgNVBAoTBnNhbU9yZzEQMA4GA1UECxMHc2FtRGVwdDESMBAGA1UEAxMJU2FtIE1vb3JlMIGfMA0GCSqGSIb3DQEBAQUAA4GNADCBiQKBgQDOrVJbJ/sPvZsgZEDUSIolP1UDT8hfyajfIaPqYHBLBK+FlywrhhrxESyzAsG/k7FSIRZvFg5vAk/W3LB+nPBtrbI2bBMEsQbznuSjzEVkQJVxZMlDjR4yNMHPLbniL64BKuTFnLEhWrnZTmpiThjwoWMPL9eK7/x7su9iDCP5NwIDAQABMA0GCSqGSIb3DQEBBQUAA4GBADWjdaRz0FBNHxXPiV9Ad0Kkm2Eag5LQXQoXUuC/VTXk56uQktVLtorp5fYAUsRD2o7ZuPGPJ6Q+5Owe8wXbxrCOX1diI5fxpH5TsS0k8Y/7/Hx3gq67JuPy8x8ApgNd+NagAKHKC0rgEP9ng1FGyhzuHICapPxmjrt2VI3SW2cJ</wsse:BinarySecurityToken>
- <dsig:Signature xmlns="http://www.w3.org/2000/09/xmldsig#" xmlns:dsig="http://www.w3.org/2000/09/xmldsig#">
- <dsig:SignedInfo>
<dsig:CanonicalizationMethod Algorithm="http://www.w3.org/2001/10/xml-exc-c14n#" />
<dsig:SignatureMethod Algorithm="http://www.w3.org/2000/09/xmldsig#rsa-sha1" />
- <dsig:Reference URI="#mvDwzM5hZWAdG6n5tKLufA22">
- <dsig:Transforms>
<dsig:Transform Algorithm="http://www.w3.org/2001/10/xml-exc-c14n#" />
</dsig:Transforms>
<dsig:DigestMethod Algorithm="http://www.w3.org/2000/09/xmldsig#sha1" />
<dsig:DigestValue>zBFquf+Y0ngNapyK4Xq0Jws1FPM=</dsig:DigestValue>
</dsig:Reference>
- <dsig:Reference URI="#nwWnNm69TPcdyp0yT8fa7g22">
- <dsig:Transforms>
- <dsig:Transform Algorithm="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-soap-message-security-1.0#STR-Transform">
- <wsse:TransformationParameters xmlns:wsse="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd">
<dsig:CanonicalizationMethod Algorithm="http://www.w3.org/2001/10/xml-exc-c14n#" />
</wsse:TransformationParameters>
</dsig:Transform>
<dsig:Transform Algorithm="http://www.w3.org/2001/10/xml-exc-c14n#" />
</dsig:Transforms>
<dsig:DigestMethod Algorithm="http://www.w3.org/2000/09/xmldsig#sha1" />
<dsig:DigestValue>rgHU/BWcaOiwuP/Q72oybFcEQO8=</dsig:DigestValue>
</dsig:Reference>
</dsig:SignedInfo>
<dsig:SignatureValue>R+RGFjzRYpGVPGINbzsFbXSQ7Slc04/mzQ+BX57oD7NhMKxCcO1C9cV2cJzWAeN5WuDlfsh3RZR/5sTsyEi3yO69ECcLUNDlbjey57GBr5W9PRRIWPs2fZVk2EH4+KOnXVghcAsrXPgm1Ai9UZQUXh0aPiOkQMDplnnhENTkKUo=</dsig:SignatureValue>
- <dsig:KeyInfo>
- <wsse:SecurityTokenReference xmlns:wsse="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd" xmlns="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd">
<wsse:Reference URI="#_FNfXFOVi1OcPKSyRUAHDyw22" ValueType="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-x509-token-profile-1.0#X509v3" xmlns:wsse="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd" xmlns="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd" />
</wsse:SecurityTokenReference>
</dsig:KeyInfo>
</dsig:Signature>
- <wsse:SecurityTokenReference wsu:Id="nwWnNm69TPcdyp0yT8fa7g22" xmlns:wsse="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd" xmlns="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd" xmlns:wsu="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd">
<wsse:KeyIdentifier ValueType="http://docs.oasis-open.org/wss/oasis-wss-saml-token-profile-1.0#SAMLAssertionID" xmlns:wsse="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd" xmlns="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd">YFfqXnq2xlt426HB9uDInw22</wsse:KeyIdentifier>
</wsse:SecurityTokenReference>
- <saml:Assertion MajorVersion="1" MinorVersion="1" AssertionID="YFfqXnq2xlt426HB9uDInw22" IssueInstant="2007-09-01T13:40:06Z" Issuer="https://phaos.com/idp" xmlns="urn:oasis:names:tc:SAML:1.0:assertion" xmlns:saml="urn:oasis:names:tc:SAML:1.0:assertion">
<saml:Conditions NotBefore="2007-09-01T13:40:06Z" NotOnOrAfter="2007-09-02T13:40:06Z" />
- <saml:AuthenticationStatement AuthenticationInstant="2007-09-01T13:40:06Z" AuthenticationMethod="urn:oasis:names:tc:SAML:1.0:am:password">
- <saml:Subject>
<saml:NameIdentifier Format="urn:oasis:names:tc:SAML:1.1:nameid-format:unspecified">oc4jadmin</saml:NameIdentifier>
- <saml:SubjectConfirmation>
<saml:ConfirmationMethod>urn:oasis:names:tc:SAML:1.0:cm:sender-vouches</saml:ConfirmationMethod>
</saml:SubjectConfirmation>
</saml:Subject>
</saml:AuthenticationStatement>
</saml:Assertion>
</wsse:Security>
</env:Header>
- <env:Body wsu:Id="mvDwzM5hZWAdG6n5tKLufA22" xmlns:wsu="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd">
- <ns0:getTime env:encodingStyle="http://schemas.xmlsoap.org/soap/encoding/">
<format xsi:type="xsd:string" />
</ns0:getTime>
</env:Body>
</env:Envelope> -
Getting an error when outputing with Autocad
I have the latest Adobe viewer installed 10.1.1. Yet I get an error when trying to output to a PDF. It wasn't always this way.
error is; "No PDF viewer installed"
Please helpMac or Win? Can you open Reader? In any case, you cannot create PDFs with Reader, which is, well, very little more than a reader of PDF files.
-
Error when posting with Safari 10.3.2
Hi all,
This is odd, I can't post in 10.3 Usage and the Leopard Usage forum and here using Safari 1.3.2 but using Camino I was able to get right in and post here (or at least I'll see when I hit the "Post Message" button. Safari let me in but would keep returning errors when trying to post a topic or reply.
Just thought I'd post here my situation as of right now. Anyone else having problems? Sorry, I lost the copy/paste of the error when I tried to post here with Safari.
littleshoulders
edit: Just now am editing this post with Safari again and it seems to be working again. Weird...I suppose just another small glitch while posting.
Message was edited by: littleshouldersproblem resolved itself. Thanks.
-
Link errors when building with librfc.a from RFCSDK 7.00 for z/OS 32 bit
There is a disparity between the documentation and the contents of the RFCSDK for z/OS 32 bit.
The documentation included with the SDK is for older versions of the RFCSDK and discusses the librfc dll and librfc.x sidedeck file. However, the new SDK no longer includes the rfclib dll and rfclib.x sidedeck file. Instead, it includes the librfc.a library file.
Simply compiling and linking with librfc.a is not enough. Numerous link errors occur. It appears that an SAP specific define must be required in order to properly decorate rfc functions. Below is an excerpt of the link errors I am receiving.
Any help on this issue would be greatly appreciated.
Thanks,
Bob
IEW2456E 9207 SYMBOL ItDelete UNRESOLVED. MEMBER COULD NOT BE INCLUDED FROM
THE DESIGNATED CALL LIBRARY.
IEW2456E 9207 SYMBOL RfcClose UNRESOLVED. MEMBER COULD NOT BE INCLUDED FROM
THE DESIGNATED CALL LIBRARY.
IEW2456E 9207 SYMBOL RfcReceive UNRESOLVED. MEMBER COULD NOT BE INCLUDED FROM
THE DESIGNATED CALL LIBRARY.
IEW2456E 9207 SYMBOL RfcListen UNRESOLVED. MEMBER COULD NOT BE INCLUDED FROM
THE DESIGNATED CALL LIBRARY.
IEW2456E 9207 SYMBOL RfcCall UNRESOLVED. MEMBER COULD NOT BE INCLUDED FROM THE
DESIGNATED CALL LIBRARY.
IEW2456E 9207 SYMBOL RfcGetAttributes UNRESOLVED. MEMBER COULD NOT BE INCLUDED
FROM THE DESIGNATED CALL LIBRARY.
IEW2456E 9207 SYMBOL RfcOpenEx UNRESOLVED. MEMBER COULD NOT BE INCLUDED FROM
THE DESIGNATED CALL LIBRARY.
IEW2456E 9207 SYMBOL ItCreate UNRESOLVED. MEMBER COULD NOT BE INCLUDED FROM
THE DESIGNATED CALL LIBRARY.
IEW2456E 9207 SYMBOL RfcLastErrorEx UNRESOLVED. MEMBER COULD NOT BE INCLUDED
FROM THE DESIGNATED CALL LIBRARY.
IEW2456E 9207 SYMBOL RfcInstallStructure UNRESOLVED. MEMBER COULD NOT BE
INCLUDED FROM THE DESIGNATED CALL LIBRARY.
IEW2456E 9207 SYMBOL ItGetLine UNRESOLVED. MEMBER COULD NOT BE INCLUDED FROM
THE DESIGNATED CALL LIBRARY.
IEW2456E 9207 SYMBOL ItFill UNRESOLVED. MEMBER COULD NOT BE INCLUDED FROM THE
DESIGNATED CALL LIBRARY.Here is a link to the info on how to access the 4200 set up pages and how to do Port Forwarding with it
http://portforward.com/english/routers/port_forwarding/Siemens/4200/iChat.htm
Use the Access info and then see if you have it doing UPnP to open the ports.
If it is then the Port Forwarding does not need setting.
Next, if you did originally set it to do Port Forwarding this should have pointed to an IP (The one your computer has/had)
Check the Port Forward that is set is pointing to the IP the computer has now by Looking in System Preferences > Network
QUite a way done the log your end suddenly switches the port it sends the SIP part of the invite on
INVITE sip:user@rip:61042 SIP/2.0
Via: SIP/2.0/UDP sip:60442;branch=z9hG4bK672a7283709f480e
Max-Forwards: 70
To: "u0" <sip:user@rip:61042>
From: "0" <sip:user@lip:16402>;tag=2100237526
Call-ID: 5c6e32e2-2788-11dd-904a-8c2872d74012@lip
CSeq: 1 INVITE
Contact: <sip:user@sip:60442>;isfocus
User-Agent: Viceroy 1.3
Content-Type: application/sdp
Content-Length: 744
This is not an iChat port and it messes up where iChat then says to send the Video and Audio data.
The log from the other end implies the ports are not even open.
10:42 PM Wednesday; July 9, 2008 -
Unknown Error When Saving with CS6
I am receiving an unknown error when trying to save my document. I have tried to take off the PDF convertable part, and tried saving it legacy style, but it's still not working. I have a doc open I need to save and won't be able to shut my computer down until I fix this... What could be the issue? Is there a fix for it?
Thank you!!!!!!
HenriAfter nearly ripping my eyeballs out and chucking my laptop out the window, I finally fixed the problem!
For some reason I didn't have a CMaps folder in my Adobe - Common Files - Font folder:
C:\Program Files\Common Files\Adobe\Fonts\Reqrd\CMaps
So I made the "CMaps" folder and copied and pasted the files "Identity-H" and "Identity-V" from an "Adobe Reader" CMap folder, and now I can save text in an *.ai file with PDF Compatibility checked.
It's pretty strange Illustrator was working for 2 years without this folder, and now all the sudden it needed it. Also, this is a very obscure fix.
Hopefully the programmers at Adobe have fixed these bugs in newer versions. -
Error when working with fillin or droplist fields as part ofgrid field
Hello,
A customer at Eli Lilly & Co. is experiencing an error when trying to
change the properties of a gridfield that contains droplists as part of an
array that is gridded. They get this error when trying to do any
modification of the grid field.
Have any of you experienced this? Any insight for resolution? We do have
a trouble ticket into Forte regarding this but wanted to see if anyone
else has experienced this. We get this bug in C1 and F2 versions:
System Error: Unable to allocate resources for object
‘dtlArray.status_ind’ of class ‘qqds_DropList’.
Class: qqsp_systemResourceException with ReasonCode: SP_ER_WINDOWLIMIT
error#[701,13]
detected at widget. ThrowResourceException at 1 Last tool statement:
method cw.load
error time: thu feb 20 8:47:23.
Exception occured (locally) on partition ‘Forte_cl0_client’,(partition
Id=BD14F94489D1-11D0-9BEE-06814DBAA77:ox124:0x1,taskid=[BD14F94489D1-11D0-
9BEE-062814DBAA77-ox1243654 on node p8888 in environment DevEnv_2F2.
Thanks,
Peggy Adrian
[email protected]Hi Jason,
If you have problems with the network this has to be solved.
I don't think we can have a software working if a cable was unplug ).
We advice our customer to use citrix servers in case if the latency into network is high (more than 200 ms) and of course in case of loosing packages.
But I don't think the problem in your case is related to the network.
It seems in your case it was a problem of send governor.
This can have problem when the cube and dimension are not syncronize or you have an error in one of dimensions.
Also can you check the table sgqueue if you have any record there when nobody is sending data?
If you have records there then you have to delete these records.
Check also tbl"your application"lock if you have records.
Regards
Sorin Radulescu
Maybe you are looking for
-
How do I get my photos from old icloud account to new icloud account?
I had changed my email for my icloud account, but I was unable to change it on my phone. So I had to reset everything because it kept autopopulating my old icloud email. I had quite a bit of photos and I am unable to locate them. Is there a way I can
-
Install windows 8 on an existing arch installation
Hi Friends, I don't know if this is the correct place to ask but after many hours of googling, I am asking this question. I had two operating systems installed on my computer which I dual booted with grub: Windows 7 and Arch linux (Archlinux is still
-
Simple things seem hard to figure out
OK --- must admit I've not been a serious Logic user (mostly experienced with DP) but now that 9 has shown up and I'm trying MainStage again, I thought I'd try and use Logic for a new project to see if it's gotten any easier. But I'm getting stuck on
-
Oracle Discoverer in Oracle EBS 11i
Hi, Just wanted to ask if Oracle Discoverer is a part of Oracle EBS 11i or do we need to purchase a separate license? Thanks, Allen
-
Watching Online Video Content Causes Massive Heat Rise!
Hi All, I have a MBP Intel C2D 2.2 running Tiger 10.4.11. I tend to use Safari as my web browser but have recently noticed that whenever I watch any form on online video's (youtube etc), the temperature of my MBP goes through the roof easily reaching