Logon failed for NSP AND how to get hard ware key
Hello ,
I have searched my whole PC for sap license.exe for NSP..... It seems that this program was not delivered with the installation CD. Is there any way to get license.exe for NSP.........?
I installed entire thing on SAP like DSPDB AND SQL studio ..once i open SAP L0GON window .I created new entry on that with application server as Localhost...
Once i try to logon that ,i am getting below error msg...
I am gettting one error like this
"partner:127.0.01:sapdb not reached"
WASAECONNREFUSED :connection refused
Regards
rajesh kaja
Hi Rajesh,
There are so many reasons due to you are unable to connect the sap server, just make sure that your server is running properly and ping your server ip to make sure that your network connection is ok and last did you configured the microsoft loopback adapter and is it a Static ip? if it is then make the entry in hosts file under c:\WINNT\system32\drivers\etc\
once you able to login then you can check your hardware key via SLICENSE transaction
Hope it helps
Regards
Subhash
Similar Messages
-
Best file sizes for images and how they get loaded?
I have 103 images in an album in iPhoto that I'm sharing with my new Appletv. Whenever I check Preview for the Screen Saver it always seems to show me the same 6 images. When I go to view the photos directly under Computers it shows a few of them instantly (these do not display under Screen Saver) though the others take a while to load.
1. How much internal storage does the ATV have?
2. Is there an ideal file size each of these should be? Will images load quicker if I can get them smaller?
3. Why does the Screen Saver not show all of the images that also load instantly under Computer (I'm guessing they're cached)?
Thanks.I havent heard of the appleTV deselecting items it deems to be too poor resolution.
Once it has a full cache (and it could support about 20000 large photos) you can expect that all images that show in iphoto also show in appletv.
Do they have some flagged designation? hidden?
Are they variant in file types? jpeg png? -
The report server has encountered a configuration error. Logon failed for the unattended execution account. (rsServerConfigurationError)
Log on failed. Ensure the user name and password are correct. (rsLogonFailed)
Logon failure: unknown user name or bad password
am using Windows integrated security,version of my sql server 2008R2
I have go throgh the different articuls, they have given different answers,
So any one give me the exact soluction for this problem,
Using service account then i will get the soluction or what?
pls help me out it is urgent based.
Regards
Thanks!Hi Ychinnari,
I have tested on my local environment and can reproduce the issue, as
Vaishu00547 mentioned that the issue can be caused by the Execution Account you have configured in the Reporting Services Configuration Manager is not correct, Please update the Username and Password and restart the reporting services.
Please also find more details information about when to use the execution account, if possible,please also not specify this account:
This account is used under special circumstances when other sources of credentials are not available:
When the report server connects to a data source that does not require credentials. Examples of data sources that might not require credentials include XML documents and some client-side database applications.
When the report server connects to another server to retrieve external image files or other resources that are referenced in a report.
Execution Account (SSRS Native Mode)
If you still have any problem, please feel free to ask.
Regards
Vicky Liu
Vicky Liu
TechNet Community Support -
I am able to run the report fine in BIDS in the preview window, and it deployes fine. When it goes to view the report in the browser, I get the following error. There is no domain, I am using a standalone computer with SQL Server and SSRS on
this one machine.
Can anyone point to where I might configure the permission it is looking for? thanks! Steven
The report server has encountered a configuration error. Logon failed for the unattended execution account. (rsServerConfigurationError)
Log on failed. Ensure the user name and password are correct. (rsLogonFailed)
The user name or password is incorrect
Steven DeSalvoHi StevenDE2012,
Based on the error message "The report server has encountered a configuration error. Logon failed for the unattended execution account. (rsServerConfigurationError)", it seems that the Unattended Execution Account settings in Reporting Services
Configuration is not correct.
Reporting Services provides a special account that is used for unattended report processing and for sending connection requests across the network. Unattended report processing refers to any report execution process that is triggered by an event rather than
a user request. The report server uses the unattended report processing account to log on to the computer that hosts the external data source. This account is necessary because the credentials of the Report Server service account are never used to connect
to other computers. To configure the account, please refer to the following steps:
Start the Reporting Services Configuration tool and connect to the report server instance you want to configure.
On the Execution Account page, select Specify an execution account.
Type the account and password, retype the password, and then click Apply.
In addition, please verify you have access to the Report Server database by following steps:
Go to SQL Server Reporting Services Configuration Manager, make sure the configuration is correct.
Go to Database, Verify that you can connect to the database.
Make sure you are granted public and RSExecRole roles.
Reference:
Configure the Unattended Execution Account
Configure a Report Server Database Connection
If the problem is unresolved, i would appreciate it if you could give us detailed error log, it will help us move more quickly toward a solution.
Thanks,
Wendy Fu -
CS6 on W7-64 worked fine since April 2013. After a general system update its activation is not recognized anymore. The activation key is suddenly invalid. I uninstalled the sofware and tried to reinstall. Failed. How to get my activation key valid again?
Error "The serial number is not valid for this product" | Creative Suite
-
I woke up this morning and my bookmarks are functioning different, and the tool bar has changed. Instead of opening the bookmarks in a page on Safari, I get a menu on the side of the page. Then I have to go click on the bookmark icon again to get rid of the menu. Has a setting changed or did Apple change it for me and how do I get it BAAAAAAACK????????????
The first G4 models were basically a repackaged/upgraded G3 & came in 350 & 400MHz models. This design was called PCI version. The next G4 models were AGPs. This link http://www.everymac.com/systems/apple/powermac_g4/index-powermac-g4.html has the specs/pictures of all the G4 models.
Power Mac G4: How to Differentiate Between Models
http://docs.info.apple.com/article.html?artnum=58418
Power Mac G4: How to Differentiate Between Models (Part 2)
http://docs.info.apple.com/article.html?artnum=42739
Using these links, you should be able to determine which model you have.
Removing the battery causes all settings in the internal memory to be reset, just like resetting the PMU/CUDA. See Mac PRAM, NVRAM, CUDA/PMU & Battery Tutorial
Cheers, Tom -
How can I get itunes to download on my PC. I just got an ipod classic for Christmas and can not get Itunes to download. Website goes to downloaded page but i never get a downloading popup. I even turned off my popup blocker.
Make an appointment at the genius bar.
If you went without an appointment, then it would make sense that you could be turned away. -
How to complain to Apple about this company and how to get a formally answer for problem with Apple agent in Kuwait??
You did not buy your iphone from an Apple store. No Apple employee sold you anything.
Your complaint is not with Apple. You bought from an unauthorized seller. Your complain is with that seller.
As you have been told more than once, Apple has nothing to do with this. -
for my ipod 3g 8gb in itunes where the info for the memory is half of the memory is taken up by "other" so im wondering what this other is and how to get rid of it?
Have you reset your Ipod resently? Never mind my ohter reply.
-
I just bought a second hand iPhone 5, but the sim tray seems to be for a sim sized ~14x8mm, thinner but longer than a nano SIM (~12x9mm). Can anyone explain why, and how to get a SIM to fit?
You would have to ask the person you bought the phone from to explain why.
-
For reasons unknown to me, my brand new ipod touch keeps activating Voice Control. I am not pressing the home button or touching any controls. I can be doing nothing with it and it just kicks on, sometimes interrupting what is already going on (like listening to an audio book in the Audible app. Is there a reason for this and how do I stop it?
Press the Home Button 3 Times... then goto > Settings > General > Accessibility > Voice Over > Off
Next... Try this...
Close All Open Apps and Perform a Reset...
Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
http://support.apple.com/kb/ht1430 -
Logon failed for the unattended execution account.
Hi while am running my report it is throwing the below error.I have verified entire config file,
And i have recently uninstall and install the Reporting services after installing this i have faced this error ,shell i need to remove any old files from the configmgr or what why it is not working.The follwg error i have get while am running the report
The report server has encountered a configuration error. Logon failed for the unattended execution account. (rsServerConfigurationError)
Log on failed. Ensure the user name and password are correct. (rsLogonFailed)
Logon failure: unknown user name or bad password
It will create any logfiles and entries in the logfile Folder and There is no folder for rsConfig in the Root Folder,
was it made any thing wrong or what give me the soluction
Please give me the right soluction for this problem.Hi Ychinnari,
According to your description, you comes across an error when you run a report.
In your scenario, the issue could cause by the Execution Account you have configured in the Reporting Services Configuration Manager is not correct. Please go to Reporting Services Configuration Manager and connect to the report server instance, then open
the Execution Account page, update the username and password for the execution account, finally, restart the Reporting Services for this instance.
Since you mentioned you can’t find the log files, please check the server which has reporting server instance installed with this path: C:\Program Files\Microsoft SQL Server\<instance name>\Reporting Services\LogFiles to check the error log.
If you have any question, please feel free to ask.
Best regards,
Qiuyun Yu
Qiuyun Yu
TechNet Community Support -
Hello, I have un Ipod classic of 160GB. On my itunes it displays that I have 113gb of other that occupies my memories! what is this other and how I get rid of it?
"Other" is the measure of used space on the iPod not taken up by Audio, Video & Photos. This includes the iPod's library and artwork plus any files you may have copied to your iPod in disk mode. The overhead for the library & artwork data is typically 1-2% of the size of the media, e.g. for 1Gb of Audio & Video expect to have around 15mb of "Other". This information is needed for the iPod's operation and cannot be removed.
If you have significantly larger amounts of "Other", not related to files you've intentionally placed on the iPod, then these are probably disconnected copies of your media files or iPod libraries left over from failed sync operations. The only way to recover the space is to do a full restore.
If you have copies of all your media in your iTunes library this isn't a problem, but if you've been manually managing the content then you might need to try to recover the files from it first. See this post by forum regular Zevoneer on transferring files from the iPod to your computer. Some of the tools rely on the iPod having a healthy library however the manual method mentioned towards the end of the post should work regardless.
tt2 -
DivX "for Mac" and Safari -- anyone get it to work on Snow Leopard?
Pardon me for the length of this post -- it's just a very involved question to which DivX has no answers, and I've literally wasted this entire week trying to get the so-called DivX "Bundle for Mac" to work, with absolutely no joy.
27" iMac Core 2 Duo 3.06 GHz, 12 GB RAM, OS X 10.6.7
Safari (v. 5.0.5 [6533.21.1])
Safari Extensions:
DivX HiQ 2.1.1.94
DivX Plus Web Player HTML5 <video> 2.1.1.94
As anyone who has used YouTube in the past year or however long this option has been available, many videos, under the regular YouTube control bar at the bottom of the video window, have an additional option: DivX HiQ, with a blue "play" button with black arrow, and in white text on black, the message "Press play for higher quality video." EVERY SINGLE time, until yesterday (about which more anon) I've selected DivX HiQ, the YouTube screen turns into the gray DivX Plus player window for a few seconds, sometimes I get a brief "Buffering…" message (sometimes not)* (see below), then a window pops up telling me "DivX Plus Web Player could not download the video, please check your internet connection." (screen shots on request).
I have DL'd AND installed -- several times over the past few days -- DivX for Mac, version 7.3 (right up-to-date as of 11-30-10 -- great support for the Mac OS), with little or no success or noticeable results. Finally, yesterday, it somehow (I thought) installed correctly: at least instead of nothing whatsoever happening after the install, this time I was whisked magically away to <<http://www.divx.com/en/software/download/installed/mac?os=mac>> where I was rather breathlessly informed "Congratulations! You can now enjoy the highest quality digital video | divx.com." Well, this was something new -- this was the first time I'd ever gotten this far. Then I was shown many movies, promising new marvels:
The first movie informed me "You have successfully installed DivX software." This WAS something new. Then it told me about the "DivX Plus Web Player… Now Featuring: DivX HiQ… Boost web video quality and performance… … Look for the DivX HiQ Button on your favorite video sites… see better quality and performance with a simple click… Try it out on your favorite sites… YouTube. Vimeo. And more.
Then I played the NEXT movie, all about the DivX Plus Player, and here I TRULY saw something I'd never seen before: *a DivX Plus Player window, that actually said " Connecting… Buffering: … " and then -- mirabile dictu! -- an actual video began to play, and actually continued to play, with no stops, fits, or error windows, right up until the end. This WAS something new under the sun. It continued, extolling the manifold virtues of "DivX to go," which was of no use to me. The next video was about the DivX Plus Codec Pack, and the video told me about the wonderful things DivX could do in Windows 7, if I was brain-dead enough to USE Windows 7. Useless info, but that video, too, opened up the way I believe the *HiQ videos are supposed to open up in YouTube, for example: "Connecting… Buffering: …," and then actually opening and playing. BTW, I hate to sound like a troglodytic Luddite, but I have no idea what "MKV" video is.
The final video, which ALSO opened up the way I believe the *HiQ videos are supposed to open up in YouTube, for example: "Connecting… Buffering: …," spoke to me about the manifold joys of DivX Plus converter, which ALSO requires the DivX Player application, and since the DivX Player application (v.7.2 (build 10_0_0_184, Copyright © 2006-2009 DivX, Inc.), which, I was given to understand, was actually a PART of the DivX software I had finally "successfully installed" (according to divx.com's delirious greeting), has never worked, none of what all these videos talked about was going to do me much good. HOW has it never worked, you ask? It has never worked in this way: I click on the DivX Player app icon, the DivX Player window opens, and the Mac OS beach ball spins merrily away, and spins, and spins, and spins -- at this point, I usually go to the kitchen for another cup of the strengthening coffee and the hopefully headache-reducing ibuprofen. When I come back, the beach ball is still spinning, so, resignedly, I go to the "Force Quit" command, where, invariably, I see the message "DivX Player not responding," and, resignedly, I force quit it. Again. This scenario has occurred without variation every single time I've tried to open the DivX Player application. It has never actually opened correctly, it has always shown up in the "Force Quit" window with the comment "DivX Player not responding," and I have always had to Force Quit it.
Now Here's what may be termed the icing on the cake: fairly well buried in the "DivX for Mac" install package is a pdf "read me." Among many other fables is THIS whopper:
"For online video tutorials visit the following URL in your web browser: http://go.divx.com/mac/tutorials"
I did just that, and though the link works, there IS no page on the DivX site for "Mac tutorials." When you click on the link, you get redirected to "http://support.divx.com/faq/view/supportFAQen100/video_tutorials_main." Except for a video tutorial under "DivX Converter_ -- for which I have no use -- entitled "How To Edit Your DivX Converter for Mac Output Settings," and these two: "How To Export To DivX In Final Cut Pro for Mac," and "How To Export To DivX Using QuickTime On A Mac" -- neither of which do me the slightest bit of good, since A) I don't use, nor can I afford, Final Cut Pro, and B) what good would it to to export ANYTHING to DivX when the DivX Player for Mac does not, and has never, done anything but hang until Force Quitted?
A brief digression on that very subject of "hanging:" there's a little section in the obscure "DivX for Mac" pdf that reads:
"5. Known issues
Network connection is lost during download
A lost network connection in the middle of a download may hang the DivX Player For Mac. If this occurs, you may 'Force Quit' the DivX Player For Mac by simultaneously clicking command-option-escape and selecting the application from the list or by right-clicking the icon in the dock and selecting 'Force Quit.' You may then resume the download by re-launching the DivX Player, selecting 'Download Manager” from the File menu and clicking 'Resume.'"
Wonderful advice, if I could ever get to the point where I was actually downloading something, but since MY particular edition of DivX Player for Mac saves me all that bother by hanging immediately upon launch, DivX has very kindly saved me the trouble of having to go through all that "Force Quit" - "Resume" nonsense. Of course, I never get to download anything or use the DivX Player on YouTube or anywhere else, so that's a bit of a downside.
So back to the putative "Mac tutorials" on the non-existent "http://go.divx.com/mac/tutorials" page: other than the three totally non-germane examples I cited above, there is nothing that I can find on the re-direct page (http://support.divx.com/faq/view/supportFAQen100/video_tutorials_main) that is the least concerned with the usage or behavior of any component of DivX on a Macintosh computer. That's certainly not uncommon, but for a company that purports to sell products that actually work on the Mac OS X platform, EVERYTHING about the DivX site is so totally Windows-centric, one would be inclined to believe that DivX is not even aware the Mac OS X platform exists. For example, here's the list of tutorials under "DivX 101 - Learn How" on the page that, according to the DivX for Mac Read Me, was supposed to solve all my problems with running DivX on a Mac:
Featured Video Tutorials
How to register your PS3 for DivX VOD playback
How do I make DivX player my default video player?
How to register your DivX Certified device with the DivX Plus Player
How to stream DivX Plus HD (MKV) files to your Xbox 360
How to use the DivX Plus Converter
Featured Text Guides
DivX Plus Converter for Windows User Guide
DivX Plus Player for Windows User Guide
DivX Codec 5.x User Guide
DivX Codec 6 and Virtual Dub Guide
It's wonderful that DivX has tutorials dealing with XBox360 and PS3, but the Mac seems to have been lost in the shuffle -- I think, from an aesthetic point, the guy in the sideways hat and the emphasis on animé and "blow 'em up" games in what few tutorials are actually there pretty much sums up DivX's idea of their market focus. Maybe they're right, but if this "free" version, that so far I have not been able to get to work as advertised on my 27" iMac, is supposed to entice any Mac user into forking over even the piddling $20.00 for the "Pro" version, the "free" version isn't DivX any "gotta have it" favors.
Now for the final mystery: I have two Safari -- v5.0.5 (6533.21.1) -- extensions from DivX:
1. DivX HiQ 2.1.1.94, which is supposed to allow you to watch videos on YouTube, Vimeo, etc. in the DivX Player for Mac, but refuses to work when enabled: EVERY SINGLE time I've selected DivX HiQ, the YouTube screen turns into the gray DivX player window for a few seconds, then an error window pops up that says "DivX Plus Web Player could not download the video, please check your internet connection."
2. DivX Plus Web Player HTML5 <video> 2.1.1.94, the little blurb in the Safari Extensions window for which says "Increase performance and video formats for your HTML5 <video>
Clicking on the "by DivX, Inc." link in the Safari Extensions window of either of these extensions takes me to http://www.divx.com/en/software/divx-plus/web-player
"High-quality video shouldn’t stop at your browser. DivX Plus® Web Player gives you the best web video performance around, even on sites using Flash®. The latest feature, DivX HiQ™ beta, lets you replace the default Flash player on popular sites for improved performance. Of course you can still watch stunning DivX® and DivX Plus HD (MKV) videos right in your browser, and even enjoy MKV features like multiple audio tracks, subtitles and 5.1 channel AAC audio."
That's all well and good, but, not when it doesn't work. I don't know what the story is with these Safari Extensions: a manual (unfortunately the only way you can do it), category by category search of Apple's "Safari Extensions Gallery" turns up NO information about these extensions, neither does -- as far as I can tell -- a search of the DivX site. Am I supposed to use BOTH extensions? Neither? One or the other? Which? So far, if I use them, I get the HiQ option in YouTube (and elsewhere), but when I click on it, I get the error message above, and the window reverts to the usual plain old YouTube window. If I disable the DivX Safari extensions, I don't even get the HiQ option.
Has ANYONE gotten the DivX for Mac Bundle v7.1, or even the DivX Plus Web Player for Mac, v2.1.1, to actually work on a Mac running OS X 10.6.7?
If so, PLEASE tell me how you got it to work.
I'd gladly for over the 20 bucks for this product if it actually worked, but not until it does.
Bart BrownWell, I can start banging my head against the brick wall again.
"I have never knowingly come across Divx in any shape or form. YouTube uses either Flash or HTML5."
I don't understand how you can make that statement, considering the discussion you participated in at:
https://discussions.apple.com/message/12210423#12210423
under: Apple Support Communities > Mac OS & System Software > Safari > Discussions
DivX Web Player and Safari
...from July 2009 to September 2010, sections of which you copied and pasted verbatim into this discussion, for example:
"Klaus1
Somerset, UK
Level 7 (22,700 points)
Re: Plug-ins
Jul 12, 2009 2:09 PM (in response to Martin Alper)
"...In Macintosh HD/Library/Quicktime/ delete any files relating to DivX (Perian already has them). However it should be noted that Perian is not an internet plugin and will not play DivX files imbedded on a website. For that you will need the DivX Player browser plugin available from http://www.divx.com/divx/mac/"
And on September 4, 2010:
"Klaus1
Somerset, UK
Level 7 (22,700 points)
Helpful AnswerRe: DivX Web Player and Safari
Sep 4, 2010 5:31 AM (in response to Philippe Pauwels)
You should read this support page http://perian.org/#support in case you need to delete older codecs. In Macintosh HD/Library/Quicktime/ delete any files relating to DivX (Perian already has them). However it should be noted that Perian is not an internet plugin and will not play DivX files imbedded on a website. For that you will need the DivX Player browser plugin available from http://www.divx.com/divx/mac/"
And, in reply to Philippe Pauwels response to the above post:
Philippe Pauwels
Level 1 (0 points)
Re: DivX Web Player and Safari
Sep 4, 2010 6:28 AM (in response to Klaus1)
Hi,
Thanks for your answer. After some more experimenting, i finally got it to work ... However, not every embedded DivX movie will play.
I just deleted another codec in the Macintosh HD/Library/Quicktime folder. (One of the codecs mentioned on http://perian.org/#support was still in the folder). Before I had only deleted the files whose name has "DivX" in it.
I did NOT install the DivX Web Player plugin.
Now some DivX videos play, some don't... So maybe I should re-install the DivX Web Plugin? But the Web Plugin never worked for me ... If I re-install it, won't I go back to where I started?
You replied, 10 minutes later:
Klaus1
Somerset, UK
Level 7 (22,700 points)
Re: DivX Web Player and Safari
Sep 4, 2010 6:38 AM (in response to Philippe Pauwels)
It could be that your previous DivX player was out of date.
As Perian says, you need both.
First, I certainly wish you (or my search of Apple Discussions, which, inexplicably, did not turn up this discussion) had referred me to this discussion before -- it would have saved a LOT of time.
Now, to your reply to Philippe Pauwels: "As Perian says, you need both." Both WHAT, exactly?
From the initial release of Perian 0.5, September 29, 2006, to the latest release, Perian 1.2.2 - Tuesday, April 13, 2011, there is not a single mention of DivX in the entire 2006 to 2011 version history. The only information on the Perian support page regarding DivX is the paragraph that states, in part, "Please consider removing obsolete QuickTime Components: ...DivX, DivX Decoder..."
Can you please tell me what you mean by "Perian says, you need both," in regard to putative DivX Extensions, Plug-Ins, Components, whatever?
Finally, on July 12, 2009, you posted, in a reply to martin Alper, a list of "the downloads and the settings you need in order to view/hear/play pretty much everything that the net can throw at you." Taking into consideration that it's 2 years later and most versions have newer updates -- including Mac OS X itself -- some items are no longer among us, and some NEW ones have shown up. could you please update or comment on this list, for the benefit of all sufferers?
Thank you very much,
Bart Brown
Your list as of July 12, 2009, taking into consideration your wise caveat that "nothing in life carries a guarantee!:
The setup described below has proved repeatedly successful on both PPC and Intel macs, but
It is known to work in the great majority of cases with Safari 3 and 4, QT 7.4.x, 7.5.x and 7.6 and OS 10.4.11 and 10.5.7.
Download and install (or re-install even if you already had them) the latest versions, suitable for your flavor of Mac, of:
RealPlayer 11.1 for Mac from:
http://www.versiontracker.com/dyn/moreinfo/macosx/15540
Flip4Mac WMV Player from http://www.telestream.net/flip4mac-wmv/overview.htm (Windows Media Player for the Mac is no longer supported, even by Microsoft)
Perian from http://perian.org/
You should read this support page http://perian.org/#support in case you need to delete older codecs.
The latest version of Adobe FlashPlayer can be obtained from here:
http://www.adobe.com/shockwave/download/download.cgi?P1ProdVersion=ShockwaveFlas h
(You can check here: http://www.adobe.com/products/flash/about/ to see which version you should install for your Mac and OS.
It is suggested that you first uninstall any previous version of Flash Player, using the uninstaller from here (make sure you use the correct one!):
http://kb.adobe.com/selfservice/viewContent.do?externalId=tn_14157
and also that you follow the instructions closely, such as closing ALL applications first before installing. You must also carry out a permission repair after installing anything from Adobe.
You should also ensure that you have downloaded and installed the correct version for your Mac of Security Update 2009-001 (and for Tiger only, 2009-002). (N.B. Security Updates require both a restart and a permission repair.)
In Macintosh HD/Library/Quicktime/ delete any files relating to DivX (Perian already has them). However it should be noted that Perian is not an internet plugin and will not play DivX files imbedded on a website. For that you will need the DivX Player browser plugin available from http://www.divx.com/divx/mac/
Now go to Safari Preferences/Security, and tick the boxes under Web Content (all 4 of them) to enable Java.
Lastly open Audio Midi Setup (which you will find in the Utilities Folder of your Applications Folder) and click on Audio Devices. Make sure that both Audio Input and Audio Output, under Format, are set to 44100 Hz, and that you have selected 'Built in Audio'.
Important: Now repair permissions and restart.
You should also consider having the free VLC Player from http://www.videolan.org/ in your armory, as this plays almost anything that DVD Player might not.
There is an additional 'fix' you could try if you are having problems with Flash and Quicktime, depending on which type of Mac you have:
On Intel Macs, make sure that you are not running Safari in Rosetta. You can check this, and change it, in the Get Info window.
On PPC Macs, go to the Hard Disk/Library/Internet Plug-Ins folder, and drag the file 'QuickTime Plugin.webplugin' to the desktop. Quit and restart Safari. If things have improved you can trash that file. If they haven't put it back, as the lack of this plug-in can cause QT content in some widgets to cease functioning.
And there is an additional kid on the block: SilverLight. Microsoft has created their own version of what a replacement for Flash could be. You can read more about it here:
http://silverlight.net/
So, if you go to any sites that have been designed for this new Silverlight stuff, you can download the plug-in from here (but make certain that you are downloading SilverLight v.1.0 for OS X (10.4.8 upwards) if you are using a PPC Mac. Version 2 only works with Intel Macs:
http://silverlight.net/GetStarted/
Recommendation: Close all applications before installing any of the above, repair permissions, reboot, and repair permissions again.
Thanks again
Bart Brown
PS: You wrote "It is a pity you chose a camera that produces video in that format! As you have discovered it is incompatible with iMovie." Uhh, I don't know where this question came from -- more stray copying and pasting, perhaps? I have no camera, and am not trying to do anything pertinent to this discussion with iMovie. -
My computer crashed and I lost everything. It was the only computer with Sync on it and I cannot get my recovery key: how can I get all my bookmarks from that Sync account? I have a ton of bookmarks/saved password and the only way to get on sync is create a new recovery key and lose all of my information.
Is there any way to get my stuff back without creating a new recovery key and losing all my old stuff?It has always been very basic to always maintain a backup copy of your computer for just such an occasion.
Use your backup copy to put everything back.
Maybe you are looking for
-
How can I use Bluetooth on my iPhone to discover other phones?
I recently tried turning on Bluetooth on my iPhone to try to discover my wife's phone. My wife has a Samsung Eternity phone. Her phone was in discoverable mode and my iPhone never could discover it. I also tried this with my friend who has an iPhone
-
Why use layer masks and adjustment layers?
I've been using PSE and CS successfully for years. One thing I have never understood is: why use layer masks and adjustment layers, instead of simply creating a copy of the subject layer (the one I want to make changes to) and experimenting with that
-
Can you run something automatically at startup?
I'm not sure if this is for the general public or a developer to answer but my question is: Is it possible to have something (ie. a video or application) automatically run when you startup the ipod touch? What I would like to try and do is give out i
-
Field labels for Radio Buttons
when creating radio button form fields in Acrobat, I'd like to also put a label next to the radio button that correspond to the value when the specific radio button is clicked (like "Yes", "No" "Maybe")
-
How to get Duotone Mode Ink List Names?
Hi All, I need to get the list of Ink Names in the duotone mode of the document Using the Java Script / Windows / Photoshop CS3 (Example: PMS 185, PMS 230....) Please give suggestion...... Regards William