Logon Failed: Invalied username or password displayed on CCM User Page

Can anyone help me finding the solution for above error message. My Call Manager version is 6.0.1. Please provide the steps for troubleshooting it.

Can you make sure the user belongs to the user group "Standard CCM End Users"

Similar Messages

  • Ical "authentication failed. your username and password were rejected by the server"

    i've a pretty busy server, fully configured with correct DNS.
    running 10.6.8, uptodate. i've stopped the ical service, and removed it from the server settings.
    then i created a folder on my RAID /volumes/raid/ical, set its ownership to _calendar:_calendar (uid 93), rwx,rx,-
    then added the iCal service back, and set the data store to this new folder.
    authentication is set to digest (to reduce potential kerberos errors), with SSL on.
    i then started the service
    an existing user CANNOT connect to the caldav server. i get the error: ical "authentication failed. your username and password were rejected by the server".
    if i create a NEW user, that user can correctly connect to the Caldav server. On first joining, an entry is created in the __uids__ folder and the calender works.
    SO. WHAT IS GOING ON?
    this is 10.6, so i do not have an option in WGM to 'enable calendering'. i've used the inspector to check for differences, but i can't see any.
    help. please. and no comments about DNS. the fact i can get  a new user to function means that is excluded. no comments about SSL. ditto. no comments about kerberos, its turned off. thanks.

    I often think of things in terms of time it takes to figure out the solution to the problem vs time it takes to nuke and pave.
    Dare I ask...  How many users would you have to remake? 
    150 users would probably take 2 hours to recreate?
    ...Have you spent 2 hours on this problem yet?  How about 4 or 6?
    Perhaps you could have typed up 450 remade users so far!
    I have a great idea as to how to change ownership of home folders to users after they're created.
    Thoughts on the problem... (but don't spend too much time on it!)
    What about crypt vs open directory password?
    In WGM, select the user, click the advanced tab, and ensure that your users have OD based passwords? 
    ...sometimes that pull-down menu displays OD, but it's not really.  Try selecting OD, retype the password there, and save.
    See if it works.
    What about in server admin....  Select the server in question, click the access button at the top.
    Ensure that your services are allowed for all users to use the iCal service.
    In the iCal service in Server Admin...
    Host name setting?  It's a stretch as new users seem to work.  Ensure it's correct?
    For the sake of argument...  Change authentication type to Any Method...  If you're running OD on the server, Kerberos is running.  I know that certain services require it even though you have the option.  Perhaps iCal is being finiky without it?
    I apologize if you've tried all these, but as a user forum, you'll typically get users that don't believe that you've tried the basics.  It's honestly the best place to start.  Seeing as we don't know what you've done, it's the best advice you'll get.
    HTH
    -Graham

  • Exchange 2010 SP1 OWA login fail "The username or password you entered isn't correct. Try entering it again"

    I upgrade my Exchange ORG from Exchange 2007 to Exchange 2010 on Windows Server 2008 R2 and worked fine. After install Exchange Server 2010 SP1 have a problem with
    the Outlook Web App,  I cannot login an get this error:
     "The username or password you entered isn't correct. Try entering it again"
    1. Create 1 test user and all work, included the Administrator User.
    2. Reset users Password, verify clear check " User must change password at next logon"
    2. I set the OWA Authentication to Domain\user name and
    User name only, Doesn't work with both ways.
    also i tried this solution, but nothing....
    http://social.technet.microsoft.com/Forums/en/exchange2010/thread/961dbdd0-554f-4a75-a374-7ada899a2807
    Thank´s everybody por reply
    Bryan

    can you login using that user account using RDP to the Exchange serverRegards, Mahmoud Magdy Watch Arabic Level 300 Videos about Exchange 2010 here: http://vimeo.com/user3271816 Read pretty advanced Exchange stuff I post here: http://www.enowconsulting.com/ese/blog.asp, follow my blog: http://autodiscover.wordpress.com ,
    corp blog: http://ingazat.wordpress.com and if you Liked my post please mark it as helpful and accept it as an answer

  • How do I stop Firefox entering my username and password into other fields on pages that are not the log-in page?

    On a website I need for my work, I must log-in with username & password. Firefox remembers my name & password perfectly. However, in another section on that same website, when I am filling in calendar information, it enters my my username in the "Location" field. Unfortunately, that is my work ID which is confidential. When I don't notice, it posts it on the very public calendar. Also, it enters my password into a password field (masked), so that no one can rsvp.
    It doesn't appear that I can edit the Saved Passwords/Exception in Firefox Options, so I am looking for suggestions!
    I want the saved name password at http://workname.com
    but not incorrectly at http://workname.com/info/*.*

    If there is a password field on a web page and you have saved a password then Firefox may try to fill that password and enter the name in the field just above that password field.
    You can look at:
    * Saved Password Editor: https://addons.mozilla.org/firefox/addon/60265
    *Form History Control: https://addons.mozilla.org/firefox/addon/12021
    You may want to disable saved form fill to prevent Firefox from filling the name.
    * [[Form autocomplete]]
    * http://kb.mozillazine.org/Deleting_autocomplete_entries

  • Can't log in on application (PC - Win7) - correct username and password; works on the web page

    I have a big problem. I cannot log in on the Skype application on my PC (Win 7). The password is correct and so is the user name. I've tried logging in via both my microsoft, skype and facebook accounts but it doesn't work. The strange thing is that it works in the internet page. I've tried to change password many times but it doesn't resovle the issue. When logging in with the Skype account I'll get the message "Could not connect" (In Swedish).When logging in with the Facebook and Microsoft account I'll get the message "Sorry, we don't know your loggin information - Please controll your Skype-name and password". The Skype application say it is up to date when using the function "Search for updates" in the "Help" drop down list.

     I've got the same problem. The same on one PC I've got 6.11 version ... and uninstall/download & install reseled the problem BUT, on anoter PC I have 6.20 version, and that one did not sigh me up, untill I have clicked recovery/get email/clicked on received link.  - That is strange and annoing, but, even more unfear and discusting: - The version 6.20 also replays 'You have latest version'!  And on skype site it is not shown up the current version, which is today 6.21.59.104  My opinions: 1: it is inappropriate to disallow old version to see the newest version number                      2: the same even with more reasonability applied to 'still suppoted version', as 6.20 I guess is for today!                      3: What is it the way to restrict access to user account WITHOUT any explanation why!!! - it must say 'it is old version and we closed acces to our site; update to current, which is ....'(if Skype comunity have trouble to prepare a page with such message as a redirection for not-up-to-day version I could help; or my children could ... or it is an issue to place it ?!)   

  • HT1349 I can't send email but I can receive it   It says username or password incorrect.  But user name and pw haven't changed.  How do I correct?

    I can receive email but not send.  Message says user name or password wrong.  But neither has changed and iPhone works fine.  Just not iPad.  How do I correct?

    iOS: Unable to send or receive email
    http://support.apple.com/kb/TS3899
    Can’t Send Emails on iPad – Troubleshooting Steps
    http://ipadhelp.com/ipad-help/ipad-cant-send-emails-troubleshooting-steps/
    iPad Mail
    http://www.apple.com/support/ipad/mail/
     Cheers, Tom

  • Reporting Services username and password prompting

    We have several branch office locations and one reporting services server. All of the branch office locations can access the reporting services server, but we have one location for the passed week, each time they make a connection to this server, it prompts
    them for a username and password and will not allow them to connect even if the correct username and password is correct.
    I have tried adding the server to the IE intranet/trusted site list. Set IE security on all zones to automatically logon with current username and password.
    What is strange is that this is the only branch office site that is having this issue. It is almost like kerberos is broken for this site location only.
    DOes anyone has any suggestions what could be causing this problem for all computers in this one location. Nothing has changed on their local servers nor have we pushed any updates to the machines.

    Hi bubba1984,
    As per my understanding, I think this issue is caused by Kerberos authentication. Kerberos is an authentication protocol that allows clients that create authentication tokens to associate a specific destination to that token. In the failure case, there is
    a mismatch between the destination specified in the token and the report server process configuration. Due to this mismatch, the underlying Kerberos authentication scheme supported by Windows prevents report server from authenticating the user.
    To fix this issue, please try to remove RSWindowsNegotiate and ensure RSWindowsNTLM is specified in the rsreportserver.config file. For more details, please take the following article as reference:
    http://blogs.msdn.com/b/lukaszp/archive/2008/03/26/solving-the-reporting-services-login-issue-in-the-february-ctp-of-sql-server-2008.aspx
    Hope this helps.
    Thanks,
    Katherine Xiong
    Katherine Xiong
    TechNet Community Support

  • Can we create a Screen Prompting for username and password

    Hi
    i have a requirement , to design a screen with username and password. Once the user logins in, another screen with the details are to be displayed.
    Can anybpdy help in creating the initial username and password?
    Regards
    Ramya

    Hi Ramya,
    Plz clarify ypur requirement.
    As i m getting, for first screen u need user_name and password, so u have to create two input fields.
    And bind these input fields with the context attributes. For the input field which is used for password,
    changed its properties. Select the property Password Field.
    and what ever details u want to show u can use just select statement.
    get back to me if any problem.
    Regards,
    Pankaj Aggarwal

  • TS3305 I can't access my you tube favorites, forgot username and password

    I never had to sign to you tube to view my favorites, the Ipod is now asking for me to sign in because I can't pull up my favorites and I don't recall username or password used for you tube.
    Where do I reset the you tube username and password or where do I retrieve it.
    thank you,

    After going to YouTube - Reset PW and having completed that I am still getting message that Authentication Failed  The username or password you entered is incorrect.
    Question is the following is the you tube password the same for computer, Iphone and Ipod?  I just don't see on the Ipod itself where to retrieve it, been at this for hours.
    Thank you for your help.

  • TREX 7.1 IIS logon failed http service start failed

    TREX 7.1 Rev 36 wurde in folgender Systemumgebung installiert:
    Windows Server 2008 R2 Standard (64 Bit)
    Java: Sun JSE 1.4.2 64bit (1.4.2_25 Rev b02)
    Umgebungsvariablen JAVA_HOME=C:j2sdk1.4.2_25-x64 gesetzt bzw. PATH ergänzt
    um C:j2sdk1.4.2_25-x64jre in
    IIS 7.5 wurde installiert
    Problem: Beim Schritt "Configuring the TREX Web Server" (Seite 48f.) bleibt der Service "httpserver" als einziger im roten Zustand.
    aptrex01  31005   httpserver   -     http.//aptrex01:31005/TREXHttpServer/TrexlsapiExt.dll
    Ein Restart-Versuch ergibt:
    "Restarting the http service finished:
    TREXIISCtrl.exe -ul -iisrestart /tns:aptrex01:31001
    IIS logon failed. Wrong sidadm password used by TREXIISCtrl.exe
    or no sidadm password stored in TREXIISCtrl.exe.
    HttpServer could not be restarted."
    Die SAP-Hinweise 1423381, 1008299 und 1029783 sind bekannt.
    1423381: IIS 6.0-Kompatibilität wurde nachinstalliert
    1008299: der IIS wurde bislang noch NICHT in den 32-Bit-Modus gesetzt
    1029783: die beiden Dateien msvcp71.dll und msvcr71.dll waren zwar nicht im angegebenen exe-Verzeichnis zu finden, wurden aber von C:TEMPClt-InstSystem32 (Datum 12.01.2010) in die aufgeführten Verzeichnisse kopiert.
    Der Blog /people/bettina.knauss/blog/2006/12/11/trex-admin-tool--troubleshooting-if-httpservice-is-not-running ist bereits bekannt (Bettina Knauss), ebenso dieser SDN Thread:
    (CRM2007 to Trex server issue).
    Mit freundlichen Grüßen
    Rüdiger Höckel
    apetito AG
    SAP Basis

    Hi Mark,
    I know the SAP Note 1483929. When I execute the command it breaks.
    \usr\sap\TXD\TRX03\exe>trexiisctrl -ul -storeprops  /ap:<PASSWORD>  /sp:<PASSWORD> /tns:txdci:30305
    Environment variable DIR_EXECUTABLE not set, using SAP_RETRIEVAL_PATH/.. as fallback
    SAPLOCALHOST='txdci'
    SAPSYSTEMNAME='TXD'
    SAPSYSTEM='03'
    SAP_RETRIEVAL_PATH: 'I:\usr\sap\TXD\TRX03\txdci\'
    TARGET: 'I:\usr\sap\TXD\TRX03\txdci\'
    This application has requested the Runtime to terminate it in an unusual way.
    Please contact the application's support team for more information.
    Kind regards,
    Roland

  • Windows Security asking for username and password to access college intranet.

    I'm trying to access my college intranet form home and I get a dialog box called "windows security". It asks for a username and password. I've never set up a username or password. I've been onto internet setting>security and enabled "automatic
    logon with current username and password", this did not work. Please help, I really need to get onto the site!

    trying to access my college intranet form home
    Contact your college network support.  The syntax for specifying your authentication may be different than you usually use when you are just connecting there locally.
    Robert Aldwinckle

  • Google Talk for Blackberry login failure, invalid username and password

    Hi Folks,
    I have a new 8520 Curve from which I cannot seem to log into Google Talk using the gtalk for Blackberry application. I have absolutely no problems logging into the service with applications from Google such as Voice, however the Google Talk by RIM is failing.  I have tried with both my standard gmail account and my business Google Apps account with no success.
    Here is what is happening.
    Start Google Talk
    I type in my username
    I type in my password
    I select Remember Password
    I select Automatically Sign me in
    I push Sign In
    The Sign in Fails with "Username and Password do not Match. You Provided ([email protected])."
    I really honestly know my password, and have even signed into google services from this very phone in past few minutes so something else is going on.

    It is half a year later and I have EXACTLY the same problem.
    Why can this app not be fixed?

  • Changing DB username and Password for APEX

    Hello Guys:
    My APEX application is currently connected to the Main database, and now the business decided they want a user to be created with the main database only for APEX.
    My main database is called ARRA, and user within the ARRA schema called ARRAAPEX was created given a diffrent username and password.
    I see in the Administrative services I can only tell it to which schema to connect to, but where do I specify the username and password for the database user to be used by APEX?
    Thank You For Your Help
    Adel

    Thank You for your reply Roel. What I meant to say is Logging to the ARRA schema using the username and password associated with ARRAAPEX would allow me to see the Date last edited field that has been added to the ARRAAPEX. ANd I am not able to see that at this moment becuase I am logging to to ARRA using the ARRA username and password.
    When we setup a workspace and then associate a schema with that workspace, where do I specify the username and password that the workspace should use to access the schema? Or if a username and a password are not needed then how does the workspace access the schema?
    Thank You
    Adel

  • Remembering username and password in an unsigned applet...

    Does anyone have any ideas how my unsigned applet could remember the username and password entered by a user?
    Previously, I was using a signed applet so could store the username and password in a persistent text file, but now I need to provide an unsigned applet solution - so does anyone have any suggestions for how my applet could remember and recall the username and password?
    Many thanks,
    James

    Take global variable and store pass and user name in it .
    or getParameter() and setParameter() u can set parameter define in html file as global . so multiple applet in same webpage can access this pass and user name

  • Maintaining username and passwords in RAM

    I need to be able to maintain a small list of usernames and passwords in memory after users logoff. I can't persist them to disk. What is the best object to use for this? I'm thinking some type of application object. I'm working with Weblogic and need to get a reference to this object. --Thanks for any help.                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                       

    What type of app do you have - Web App, Client/Server?
    In either case, it seems you could create a container object during startup as a singleton and r/w the credentials to it.
    --BobC                                                                                                                                                                                                                                                                                                                                                                                       

Maybe you are looking for