Logon Failed using Crystal Report XI
I wrote a VB 6 app that has the CRViewer and calls (.rpt's). The ".rpt's" use a MS Access 2003 database. This database DOES NOT have any security in the way of passwords. This application runs on a "stand-alone" system NO SERVER IS INVOLVED.
The program and Crystal Reports work fine on my system. About a week ago, I tried to install Crystal Reports Release 2. I had a lot of problems. I deleted it and re-installed CR from my install cd's. Ever since then, I have had the following problem:
I use MS Package and Deployment system to create the "Setup and Install" package. Ever since the above problem with Release 2, when I install and run the package on a different system, when I try to access the reports, I am getting a "Logon Failed" error message. PRIOR to trying to install Release 2, I never had this error message. I have no idea what is causing the problem.
I even deleted and recreated the database--same problem exist.
I have a very small scale-down version of this app. Is there any way I can send a "zip" file to you?
Please, I have a deadline on this project. I need some serious help ASAP.
In an effort to help resolve this problem, here is code from the scaled-down version: Prior to running this code, ReportPath = App.Path and ReportName = "Report1.rpt"
This code is from my CRVIEWER form:
Private Sub Form_Activate()
Set craxreport = craxapp.OpenReport(ReportPath & "\" & ReportName)
If ReportName = "Report1.rpt" Then
End If
DoReport:
DoEvents
' ==============================================================================
Screen.MousePointer = vbHourglass
crviewer1.Refresh
crviewer1.Zoom "100"
While crviewer1.IsBusy
DoEvents
Wend
crviewer1.ReportSource = craxreport
crviewer1.Refresh
crviewer1.ViewReport
crviewer1.Refresh
Set craxreport = Nothing
Screen.MousePointer = vbDefault
End Sub
Private Sub Form_Load()
Set craxapp = CreateObject("Crystalruntime.application.11")
End Sub
Private Sub Form_Resize()
Me.Height = Screen.Height
Me.Width = Screen.Width
Me.Top = 0
Me.Left = 0
crviewer1.Top = 0
crviewer1.Height = Me.ScaleHeight
crviewer1.Width = Me.ScaleWidth
frmCRPrint.Refresh
End Sub
This code is the "Connection" string:
Public ReportPath As String
Public craxapp As New CRAXDRT.Application
Public craxreport As CRAXDRT.Report
Public CRXDatabaseField As CRAXDRT.DatabaseFieldDefinition
Public ReportName As String
Public pconSports As ADODB.Connection
Public Sub OpenConnections()
Set pconSports = New ADODB.Connection
pconSports.ConnectionString = "Provider=Microsoft.Jet.OLEDB.4.0;Data Source=" & App.Path & "\Sports.mdb" & ";Persist Security Info=False"
ReportPath = App.Path
pconSports.Mode = adModeReadWrite
pconSports.Open
OK, a few details to go over.
You do not need all of the below references:
Crystal ActiveX Report Viewer Library 11.0
Crystal Reports ActiveX Designer Design and Runtime Library 11.0
Crystal Reports ActiveX Designer Library 11.0
Crystal Reports ActiveX Designer Run Time Library 11.0
As long as you are not using report creation APIs, you only need
Crystal ActiveX Report Viewer Library 11.0
Crystal Reports ActiveX Designer Run Time Library 11.0
Which means you'd be using the craxdrt.dll (Dim myApp as New Craxdrt.Application), and the MSM files you need would be; crystalreports11_RDC_Runtime.msm, crystalreports11_RDC_license.msm (you need to add the keycode to this) and crystalreports11_RDC_reportEngine.msm.
If you are using report creation APIs, you do not need Crystal Reports ActiveX Designer Run Time Library 11.0.
Re. creation of deployment package:
I reloaded CR XI on my Development System Build 11.0.0.895
I installed CR XI on my other PC(Test) Build 11.0.0.895
During the creation of the Install Package using MS Package and Deployment System
I do not believe the MS Package and Deployment Wizard that came with VB 6 can handle MSM files(?). To use MS files, you have to use something like MS Visual Installer, InstallShield, Wise, etc.
Ludek
Edited by: Ludek Uher on Oct 23, 2008 6:30 AM
Similar Messages
-
Crystal Report 10 and Visual Basic 6 - logon failed in crystal report viewe
Guyz,.
Report viewer is showing logon failed, pelase help me, i can able to view the data from rs1(recorset).
please hellp me to fix this issue, i need to pass the sql query to my pre designed Crystal report which has all the field as same as SQL query.
Please suggest me if any other alternate way to do this , my code is below.
Environment : Crystal Report 10, Visual Basic 6
cr_preview -> CrystalActiveXReportViewer
RepName -> Fiename and path of the Crystal report is designed from Crystal Report Designer.
Function show_rep(Sql As String, RepName As String)
Dim crystal As CRAXDRT.Application
Dim report As New CRAXDRT.report
Dim rs1 As New ADODB.Recordset
If rs1.State Then rs1.Close
rs1.Open Sql, cn, adOpenStatic, adLockReadOnly
Set crystal = New CRAXDRT.Application
Set report = crystal.OpenReport(RepName)
report.DiscardSavedData
report.Database.SetDataSource rs1
'cr_preview.Refresh
cr_preview.ReportSource = report
cr_preview.Visible = True
cr_preview.ViewReport
Do While cr_preview.IsBusy
DoEvents
Loop
cr_preview.Zoom 100
If rs1.State Then rs1.Close
Set rs1 = Nothing
Set crystal = Nothing
Set report = Nothing
End FunctionHi,
Please refer to the link for the list of example, [click here|http://pscode.com/vb/scripts/BrowseCategoryOrSearchResults.asp?optSort=Alphabetical&lngWId=1&B1=QuickSearch&txtCriteria=crystalreport+10&blnWorldDropDownUsed=TRUE&txtMaxNumberOfEntriesPerPage=10&blnResetAllVariables=TRUE]
Regards,
Clint -
Failed to retrieve data from the database using Crystal Reports XI R2
I am using Crystal reports XI R2 and using the Universal Web Connector (connecting to Coghead). When I put some some of the fields from the database and run Preview I get "Failed to retrieve data from the database." . Where is this message coming from and how can I track down what the issue is?
Hi Jamie,
When you are trying to Browse Data of a field it is not poping up any window menas, it is unable to interact with database and get the data from database.
Try to create a new report using ODBC with Xtreem Sample Database. If you get the data in your report without any error then your connector is not working / unable to pull the data into your report.
You can find the supported platforms document in below link
http://support.businessobjects.com/documentation/supported_platforms/xi_release2/default.asp
Thanks,
Sastry -
Unable to load password protected Accdb file using crystal reports 2008
Hi,
I am trying to generate crystal reports using crystal reports 2008 and in the process, I am internally setting accdb file to all my rpt files .
When i try to map my accdb file (Without passord protection) to all my rpt files, everything works fine and i am able to generate reports.
But, when i try to map the password protected accdb file to the rpt file, it throws me an error saying
"LogOn failed. "
Details : ADO Error Code : 0X
Source: Microsoft Access Database Engine
Description : "Cannot start your appliaction, The workgroup information file is missing or exclusively opened by other users"
SQL State : 3028
I have made sure that none of my applications are running when i try this.
Please find the screenshot for the same.
Please let me know how to resolve this issue as i need to work with password protected accdb files for generating reports.
Thanks in Advance.
Regards,
RamnathHi Ludek,
This is happening in CR designer.
Besides, please find below the additional basic info regarding this
Crystal reports version : 2008
Database connection type : OLE
OLE DB Driver : Microsoft Office 12.0 Access Database Engine OLE DB Provider
Database : Access 2010
Dev Language : VB.Net
Regards,
Ramnath -
Performace Issue using Crystal Report For enterprise and BEx Queries
Hi all;
We are generating the following error stack when trying to build a report on top of a BEX query using Crystal Report for Enterprise :
|7C4F8ECE44034DB897AD88D6F98B028B3|2011 12 12 17:24:21.277|+0100|>>|E| |crj|20380| 56|ModalContext | |2|0|0|0|BIPSDK.InfoStore:query|CHVXRIL0047:20380:56.174:1|-|-|BIPSDK.InfoStore:query|CHVXRIL0047:20380:56.174:1|Cut2PbOe3UdzgckPBHn8spEab|||||||||com.crystaldecisions.sdk.occa.infostore.internal.InfoObjects||Assertion failed: Java plugin for CommonConnection is not loaded.
java.lang.AssertionError
at com.businessobjects.foundation.logging.log4j.Log4jLogger.assertTrue(Log4jLogger.java:52)
at com.crystaldecisions.sdk.occa.infostore.internal.InfoObjects.newInfoObject(InfoObjects.java:576)
at com.crystaldecisions.sdk.occa.infostore.internal.InfoObjects.continueUnpackHelper(InfoObjects.java:548)
at com.crystaldecisions.sdk.occa.infostore.internal.InfoObjects.continueUnpack(InfoObjects.java:489)
at com.crystaldecisions.sdk.occa.infostore.internal.InfoObjects.startUnpack(InfoObjects.java:464)
at com.crystaldecisions.sdk.occa.infostore.internal.InternalInfoStore$XRL3WireStrategy.startUnpackTo(InternalInfoStore.java:1484)
at com.crystaldecisions.sdk.occa.infostore.internal.InternalInfoStore$XRL3WireStrategy.startUnpackTo(InternalInfoStore.java:1464)
at com.crystaldecisions.sdk.occa.infostore.internal.InternalInfoStore.unpackAll(InternalInfoStore.java:910)
at com.crystaldecisions.sdk.occa.infostore.internal.InternalInfoStore.queryHelper(InternalInfoStore.java:944)
at com.crystaldecisions.sdk.occa.infostore.internal.InternalInfoStore.queryHelper(InternalInfoStore.java:929)
at com.crystaldecisions.sdk.occa.infostore.internal.InternalInfoStore.query_aroundBody24(InternalInfoStore.java:798)
at com.crystaldecisions.sdk.occa.infostore.internal.InternalInfoStore.query(InternalInfoStore.java:1)
at com.crystaldecisions.sdk.occa.infostore.internal.InfoStore.query_aroundBody20(InfoStore.java:175)
at com.crystaldecisions.sdk.occa.infostore.internal.InfoStore.query_aroundBody21$advice(InfoStore.java:42)
at com.crystaldecisions.sdk.occa.infostore.internal.InfoStore.query(InfoStore.java:1)
at com.businessobjects.mds.securedconnection.cms.services.olap.OlapCmsSecuredConnectionService.getConnectionObject(OlapCmsSecuredConnectionService.java:125)
at com.businessobjects.mds.securedconnection.cms.services.olap.OlapCmsSecuredConnectionService.getOlapSecuredConnection(OlapCmsSecuredConnectionService.java:191)
at com.businessobjects.mds.securedconnection.loader.internal.SecuredConnectionLoaderImpl.getOlapConnectionFromSecuredConnection(SecuredConnectionLoaderImpl.java:83)
at com.businessobjects.mds.securedconnection.loader.internal.SecuredConnectionLoaderImpl.getConnectionFromSecuredConnection(SecuredConnectionLoaderImpl.java:60)
at com.businessobjects.dsl.services.workspace.impl.DirectOlapAccessDataProviderBuilder.loadSecuredConnection(DirectOlapAccessDataProviderBuilder.java:193)
at com.businessobjects.dsl.services.workspace.impl.DirectOlapAccessDataProviderBuilder.loadSecuredConnection(DirectOlapAccessDataProviderBuilder.java:176)
at com.businessobjects.dsl.services.workspace.impl.DirectOlapAccessDataProviderBuilder.provideUniverseFromCms(DirectOlapAccessDataProviderBuilder.java:63)
at com.businessobjects.dsl.services.datasource.impl.AbstractUniverseProvider.provideUniverse(AbstractUniverseProvider.java:41)
at com.businessobjects.dsl.services.workspace.impl.AbstractDataProviderBuilder.updateQuerySpecDataProvider(AbstractDataProviderBuilder.java:119)
at com.businessobjects.dsl.services.workspace.impl.AbstractDataProviderBuilder.updateDataProvider(AbstractDataProviderBuilder.java:106)
at com.businessobjects.dsl.services.workspace.impl.AbstractDataProviderBuilder.addDataProvider(AbstractDataProviderBuilder.java:49)
at com.businessobjects.dsl.services.workspace.impl.WorkspaceServiceImpl.addDataProvider(WorkspaceServiceImpl.java:56)
at com.businessobjects.dsl.services.workspace.impl.WorkspaceServiceImpl.addDataProvider(WorkspaceServiceImpl.java:45)
at com.crystaldecisions.reports.dsl.shared.DSLTransientUniverseServiceProvider.createSessionServicesHelper(DSLTransientUniverseServiceProvider.java:72)
at com.crystaldecisions.reports.dsl.shared.DSLServiceProvider.createSessionServices(DSLServiceProvider.java:428)
at com.businessobjects.crystalreports.designer.qpintegration.DSLUtilities.getServiceProvider(DSLUtilities.java:279)
at com.businessobjects.crystalreports.designer.qpintegration.InitializeDSLRunnable.run(InitializeDSLRunnable.java:82)
at org.eclipse.jface.operation.ModalContext$ModalContextThread.run(ModalContext.java:121)
Here seems to be that a plugin is not loaded : com.crystaldecisions.sdk.occa.infostore.internal.InfoObjects||Assertion failed: Java plugin for CommonConnection is not loaded.
could this affect the performance of Crystal Reports for Enterprise and how could I fix this ?
Best Regards
AnisVenkat,
Thanks for your response. Please note, however, the transaction RAD1 does not exist. Let me provide more details about the current settings of the InfoObject.
The Characteristic is 'Item' (0CS_ITEM) and upon going to RSA1 > Modeling > InfoObjects > Item (0CS_ITEM) > Right Click > Display > Business Explorer (tab) > Text Type is set to 'Long Text' and BEx description is set to 'Long description' already.
When I run/execute the query with this Item characteristic, the results in BEx Analyzer is showing appropriate long text, however, Crystal Report for Enterprise shows short text only
K
Edited by: Kumar Pathak on Feb 3, 2012 6:18 PM -
Deploy Visual Basic 6.0 RDC application using Crystal Reports 9 on Windows Vista
Post Author: albe
CA Forum: General
When attempting to deploy a Visual Basic 6.0 Report Designer Component (RDC) application using Crystal Reports 9 on Windows Vista systems, the application fails after the first print or preview (that show normally) and an error occurred: -2147417848 Method '' of object '' failed.
The app use the RDC and Active Data; I verify that the problem is encountered when the app calls the 'SetDataSource' method.
I tried everything that came in my mind: reinstalling it a few times, with administrator priviledges, disabling uac, manually registering dlls, ...
I hope that this will be fixed, since Crystal Report 9 is the last CR version compatible with windows 98.
thanks in advance,
AlbertoHello,
This forum is for community use and is not considered a support site. For assistance you need to purchase a case from our support site. But 9 is no longer a supported version so this is your only place to get assistance.
Try downloading the only patches available from:
ftp://ftp1.businessobjects.com/outgoing/CHF/cr90actxwin_en.zip
ftp://ftp1.businessobjects.com/outgoing/CHF/cr90dbexwin_en.zip
ftp://ftp1.businessobjects.com/outgoing/CHF/cr90devwin_en.zip
ftp://ftp1.businessobjects.com/outgoing/CHF/cr90mainwin_en.zip
Thank you
Don -
Post Author: Manjula
CA Forum: JAVA
Hi,
Trying to schedule a report using Crystal Reports Server Java SDK. Want to pass DBConnections from API, though passing DBConnections, the report is not being scheduled and says "Failed to retrieve data from the database.Details:[Database Vendor Code:6550].
Would be thankful if someone could answer my point as applicable.
Here is the code attached.
ISDKList dbLogons = oReport.getReportLogons();int dbLogonSize = dbLogons.size();
for(int i=0; i<dbLogonSize; ++i) {
IReportLogon dbLogon = (IReportLogon)dbLogons.get(i);
dbLogon.setDatabaseName("DBname");
dbLogon.setUserName("usrname");
dbLogon.setPassword("pwd");
Thanks in advance.Post Author: Manjula
CA Forum: JAVA
Ted,
Thank you for your valuable information.
First, tried scheduling on Central Management Console and then with the java code.It worked fine, but here is another question for you.
On the Console, a report exists with ServerName and UserName harcoded and when trying to set ServerName and UserName from the java code, its throwing exception. Where as Password is not set on Console, am able to set password from java.
And DatabaseName is not set on Console (non editable), unable to set the same from java too. Why is it so?
So, my question is - though ServerName,DatabaseName,UserName,Password exists on the Console report, can't I override those parameters from java?
Would be greatful if you answer my question and provide me some guidance.
Thanks in advance. -
Can you use Crystal Reports for Enterprise to connect to BOE4 over the web?
Hello,
When I use Crystal Reports for Enterprise in BI Launchpad when I am connected on the LAN network it works.
If I connect via the internet, it doesn't.
I wanted to know if Crystal Reports for Enterprise only works if you are connected to Business Enterprise 4.0 on a LAN network and if it's not designed to work remotely, aka via the internet connection, like you can with Webi?
regards
JanettaHello,
We installed BOE4 on the server, it runs perfectly, no issues.
Install Crystal Reports for Enterprise on a laptop. It's the latest one as I checked to see if there's any later versions or patches.
I am able to log into the BOE Enterprise system as administrator.
Namely I have setup the Server connections per the following:
Server Name: <IP address>
The check box for SSL is unchecked.
Server Port Number: nnnn
Server Context: /dswsbobje
System display name: <my server> External Connection
User Name : Administrator
It connects successfully.
I then go and create a report against a Universe that I can see listed on my BOE 4 server.
It then comes up with this error message:
"Unable to Logon: There is a problem logging on to SAP BusinessObjects Enterprise.
Please check your logon credentials and make sure your nework is properly configured before trying again.
If problems persist please contact your Administrator."
Architecture:
BOE 4 sits on Windows 2008 Server SP2
Laptops tried it on are Windows Vista and Windows 2003 Std.
Thanks for looking into this for me.
Edited by: Symonds Janetta on Oct 11, 2011 12:05 AM -
Using Crystal Reports 2008 SP3 with the Brother 9500PC, 9700PC, and P9800PC
We have using Crystal Reports with the Brother Label printers for years until we were forced to use Crystal 2008. The label printers have worked in the past and we usually create a label template in the printer driver and this configuration is stored in the Crystal Report. These label printers can use several different size cartridges. When creating a report using the Editor, the report displays and prints correctly using the template embedded into the report. This is using the updated SP3.3 service pack. The problem is in the Run Time application that is embedded in another application to run the reports. When printing a label from the application, the report previews just fine with the correct size and format. However, when you try to print the label, the run time driver ignores the template embedded in the report and instead uses the default settings for the printer driver. So, if I have a 1 inch cartridge in the printer, and the default settings for the printer is a 1 1/2 inch cartridge, then the report will try to print assuming there is a 1 1/2 inch cartridge which will cause the application to fail. This is a problem with Crystal 2008 (12) and we would like to find a solution to this. Thanks, Doug
Hi Cameron,
You can setup custom label sizes in Crystal. In the folder where you installed Crystal Reports is a text file called Labels_en.txt. This contains the label definition Crystal uses. You can add a new label in here.
Now when you open Crystal and create a new report by selecting the Mailing Label Repotr Wizard, you will see your new label when you get to that step.
When save a report, the report will do two things. If you have set the report to a specific printer, Crystal saves the printer and paper settings inside the RPT. When the print engine runs the report, if it can't find the printer saved in the report it will default to the default printer.
What I believe is happening is the application is loading the report and because it can't find the label printer it was designed with it's going to the default printer. So you do have to set the PrintReportOptions in your application to redirect the report to the correct printer, driver and papersize.
This has pretty much been the way since version 4 that I can remember. The positive side is you don't have to set all the parameters yourself. You can get the PrintReportOptions from the report when you open it. Then you just need to pass the printer name, driver and port. The rest of the options (papersize) will already be populated from the Get.
Good luck,
Brian -
Print Preview using crystal report in SAP B1 slow.
Dear all,
I face another problem. Print preview using crystal report in SAP B1 is very slow. Although i have create a query view in SQL server but it's still slow for my user. First time i create using table in crystal report. just drag the table. It's take more than 10 minutes. After that i move all the query to view in SQL server , it's take 1-2 minutes to print preview some time more.. But i think that it's still slow. Does any one know how to print preview fast. Just like in PLD.
Thanks in advance
bodhi86Hello,
How do you answered to this question ?
Malika
Edited by: Malika Sanoune on May 13, 2011 1:48 PM -
Hi
I am having problem on using Crystal Report Viewer on one of my windows application.
I am not sure how to put the Crystal Report Viewer 11 Control onto the tool box.
I could found a Crystal Report Viewer control on my computer, but it is version 8.5.
I have also found another one which is Called Crytal ActiveX Report Viewer, i don't think it is the one I can use. As when I try to load a dummy report on to the Crytal ActiveX Report Viewer, It return an error. "specified type is not valid"
Please see the Code sample below.
private sub loadReport()
Dim r as New ReportDocument
'v is the name of the Crystal ActiveX Report Viewer Control
r.Load("C:\Report1.rtp")
v.ReportSource(r) <---It throw error on this line.
End Sub
Could you give me some advice about what have I done wrong, How to check if I have set up the Crystal Report Component correctly in my Visual Studio 2005 Standard edition.
Thanks in advances.
Many thanks
ChiVS 2005 Standard and Express editions do not come with Crystal Reports; only the Professional and higher editions will have CR bundled. However, I believe you can purchase CR XI R2 Developer and it will give you the components you need to create a VS .NET 2005 application using the Standard edition.
-MJ -
Print preview using crystal report in SAP B1 is very slow.
Dear all,
I face another problem. Print preview using crystal report in SAP B1 is very slow. Although i have create a layout in AR invoice form and applying the print sequences (ie 4 prints). Does any one know how to print preview fast. Just like in PLD.
Thanks in advance
Kamlesh NawareHi,
Basically Crystal report run with SQL statement, I would suggest to do well performance tuning on SQL query / Store Procedure.
Structure your query in DBA manner that will make some how faster such as use ( inner join, less condition,...)..
also if it simple query then use Command in Crystal report rather store Procedure..that make some how Faster your report.
Thanks
Kevin
Edited by: Kevin Shah on May 27, 2011 4:21 PM -
Get error when preview marketing documents by using crystal report layout
Hi experts,
I want to switch to using Crystal Report for marketing documents layout. I have import Sales Quotation u2013 Generic (CR) layout which provided by XX-1.2.b1p package. I can preview added records but it doesn't work on drafting documents and saved drafts. The system prompt u201CThe system cannot find the path specifiedu201D and u201CObject reference not set to an instance of an objectu201D. On the same server, it was working fine in our other company database. I don't think this is the problem of database location setting in Crystal Report. Can anyone give me advices, thanks!
Regards,
IvanHi! Rahul,
Thank you for your reply first. Your method doesn't work in my case. Can you tell me the steps of creating a new layout for added records and draft documents. I have created a quotation layout which work with added records only, the steps has been show below and please comments, thanks.
1. In Crystal Report > new blank report > create new connection > Choose "SAP Business One" > Select OQUT under "B1 Tables".
2. Insert "CardName" field to report > Create DocKey@ parameter and set it equal to DocEntry in select expert record function
3. Click Add-ins > SAP Business One > Save > Choose company database and input manager password.
Regards,
Ivan -
Server error in printing in server using crystal report 2008 with VS2008
Hi,
We are using Crystal report 2008 in VS 2008. Everything working fine in local but when we deployed it in the server we are getting the below while print the report.
"An error occurred on the server. Printing will be stopped. Would you like to view the error information"
Anyhow the report is printing but I don't know why this error is occur and how to stop this. I had installed the CR runtime in the server. I dont know what is going wrong. The same we tested locally in a non crystal report installed PC.
Please help me to get rid out of this error.
Thanks
NatrajSoemthing strange going on here.
Typically this Integrated vs Classic is an issue with images where Classic uses web.config tags between <system.web><httpHandlers><u2026 crystalimagehandler../></httphandlers></system.web>
Integrated uses tags between <system.webserver>u2026<handlers><..crystalimagehandler/></handlers></system.webserver>
Not sure why this would affect printing. Do you have tags that specifying where to download the printcontrol from? On the other hand, I would think that if images had anything to do with it, then you'd get red Xs when viewing. As far as I know, the printcontrol.cab doesnu2019t need to be specified in the <system.webserver> tags.
This one may be best resolved over the phone. Phone support can be obtained here:
http://store.businessobjects.com/store/bobjamer/en_US/pd/productID.98078100?resid=S6I@hgoHAkEAAGsiyVkAAAAR&rests=1282226845369
Ludek -
Sub report group tree in main report Using crystal report 12
Hi experts,
I have a strange requirement like, same data needs to be grouped two different ways in a same report. Like
Store1:
Summary of sales on each item chart
Store2:
Summary of sales on each item chart
.....it goes like this
Department1(multiple stores)
summary of sale on each item chart - store1
summary of sale on each item chart - store2
--........ it goes
Department2
summary of sale on each item chart - store3
--........ it goes
Its in single report, the first part is grouped only with store and in second part the store is under department. How to do this in same report?
I achieved this by creating a sub report to display the first part of data and in the main report sup report data plus the second part of data will be displayed. And its working well but now the problem is the group tree, I'm not able to see the sub report group tree in the main report.
How to get the sub report group tree in the main report, Or is there any other better way is there so i can get both the data as well the group tree. Please help me to solve this. CryCryCry
I'm using crystal report 2008(installed separately) with Visual Studio2008 (.Net3.5)
Thanks in advance.Hi
Thanks for the reply.
Yea both data source are same(Datasource is SQL Stored Procedure). I cant use like that, because my client needs the group tree also. In case if there is no group tree, we can create one more group and supress it conditionaly. But here the problem is there is no way to suppress any of the group item in group tree as we can do it in the detail section.
So please me with some different ways and also , please clarrify the following doubts
1. Can we supress one or more items in the group tree.
2. Can we get the sub report group tree in main report(Everything is working when i used the sub reports except the group tree). So I'm trying for different ways to do, but none is helping me
Please help me
Maybe you are looking for
-
I am unable to instal itunes (greater than version 7) as it gives me the error,"Bonjour service failed to start, verify you have sufficient privileges" , i have checked on apple support and the only help for this error says that mcafee antivirus is b
-
Confirm sales order with idoc ORDERS05
Hi everybody. I´d like to know if it´s possible to confirm a sales orders with idoc ORDERS05 and message type ORDCHG and posting FM IDOC_INPUT_ORDCHG_VMI. How would I have to fill the idoc data?? Thanks a lot
-
I need a receipt on my annual purchase can you please email me a copy
I need a receipt on my annual purchase can you please email me a copy
-
i'm running version 2 on a dual 2 GHz PowerPC G5 with 2,5 GB DDR SDRAM and using Mac OS X 10.4.11. i run it with NOTHING else running and it take forever, the beach ball starts to spin for a while and then finishes the task. any suggestions? i mainly
-
Hi guys and girls, I've got a simple problem: i'm busy programming a browser (for now it's a simple text based browser) and everything works fine, the connection works and it gets all http headers and the html file. But once and a while my program do