Logon group not found when launching planning workbench

When I start planning workbench in RSPLAN, the following error appears:
Connect to message server host failed Connect_PM  TYPE=B MSHOST=bwdev.shdl.com GROUP=PUBLIC R3NAME=BWD MSSERV=sapmsBWD PCS=1 ERROR       Group PUBLIC not found TIME        Mon Sep 25 13:13:13 2006 RELEASE     700 COMPONENT   LG VERSION     5 RC          -6 MODULE      lgxx.c LINE        4288 DETAIL      LgIGroupX COUNTER     1
We filled group "PUBLIC" for template installer and it went through with all green lights including BI IP required 4 JCO desitinations.
but after having a look at the following threads  Re: BIP in 2004s, I notice the following sentence: "3. Logon Group - Make sure logon group is specified in ABAP system (SMLG)", when I go to SMLG, only one record with empty logon group exists, but the status is green.
Shall I maintain anything in SMLG? create "public" group in SMLG?
need suggestion...
Patrick

Hi Gregor
I have already followed points with 919850, and our basis already setup SLD (for bw system in SLD, he setup two logon group: SPACE(default) and PUBLIC).
After I maintain logon group "PUBLIC" in SMLG, and then re-execute the step 14 (maintain 4 BI IP JCO destinations), 4 JCO destination appears with green lights again afterwards.
However, now the internl error 500 appears in the web.
any more suggestion?
Patrick

Similar Messages

  • Font not found when launching OEM

    Before the OEM window appears, messages apear saying:
    Font specified in font.properties not found [--system-medium-r-normal--*-%d-*-*-p-*-adobe-fontspecific]
    There are 21 lines of the same text as indicated above.
    Any suggestions?

    Font specified in font.properties not found [--system-medium-r-normal--*-%d-*-*-p-*-adobe-fontspecific]
    I don't think the font cause functional problem. It just doesn't look good. Right this is just warning, you could save ignore that.

  • Error "No automatic updation for IT0008. Allowance Grouping not found"

    I am maintaining IT581 of an employee.but system throws an error -->No automatic updation for IT0008. Allowance Grouping not found.I have maintained allowance grouping properly.The thing is my requirement is that i am maintening pay groups and level in table T710 instead of T510.Not touched T510.
    Means i have also created IT1005(Planned compensation) in OM.Every other thing is ok.Except IT581.
    What i beleive is its taking  assignement from table V_T7INA3.where i am not able to store ESG for CAP, groups and levels.Because its taking value from T510.But i want to do everything on basis of pay scale grade ie T710.
    Need your help and inputs....

    Dear Sumo,
    Kindly update feature 40 ECC which will help to automatic open the IT0008 for autmatic updation of such wagetypes ex: HRA
    you can maintain percentage their for the particular wagetype for
    40ECS - HR-IN : Feature to Determine Elgibility for RAPS
    This feature is used to determine the factor which is multiplied with
    the Reimbursement, Allowance or Perk (RAP) amount to calculate the
    amount payable to the employee.
    rocedure
    The factor can be arrived at by making a decision on the following
    details:
    Country Grouping
    Company Code
    Payscale Grouping for Allowances
    Wage Type
    Gender Key
    Number of children for children education allowance
    Number of children for children hostel allowance
    Personnel Number
    ample
    As per company A's policy, all employees belonging to the Payscale
    Grouping for Allowance MN01, receive twice the amount eligible for
    Childrens' Education Allowance (wagetype M260) in case the employee has
    two or more children.
    1           D   MOLGA
    2   **          &ELIAL=1
    3   40      D   LGART
    4   40 ****     &ELIAL=1
    5   40 M260 D   CEANO
    6   40 M260 *   &ELIAL=2
    7   40 M260 1   &ELIAL=1
    kindly update the same and let me know.
    rgds,
    priyanka

  • HELP"apple application support not found when installing itunes after a hard drive crash and replace

    HELP"   error "apple application support not found" when downloading itunes after a hard drive crash and replacement????

    Let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
    Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
    http://www.apple.com/itunes/download/
    Download and install the free trial version of WinRAR:
    http://www.rarlab.com/
    Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
    Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
    Does it install properly for you? If so, does iTunes launch properly now?
    If instead you get an error message during the install, let us know what it says. (Precise text, please.)

  • Public logon group not showing up

    Hi everybody
    I am trying to create a SAPGui entry for logon group access to customer ECC6.0 system.
    I have configured the service and sapmsg.ini file.
    I was told by customer sysadmin that PUBLIC logon group was created but in the list of logon groups I can only see SPACE.
    Moreover, if I complete the procedure with SPACE logon group, when I try to login it won't succeed, warning that even the client number is wrong (?!).
    My questions are:
    - how to retrieve message server number and port (even though I am fairly certain that they are ok, otherwise the Logon group list wouldn't have been populated... right?)
    - what might be the cause for the PUBLIC logon group not to show up
    Thanks, points will be awarded
    Vincenzo

    Hi,
    Since you get such strange errors, it almost seems like you are trying to logon to the wrong server.
    Please check sapmsg.ini again to see that the correct hostname/ip-address is entered.
    Also, did you notice if the server name is correct at the logon screen ?
    Every Dialog instance or Central Instance gets logon group SPACE by default. Then, when you create logon groups for the instance,
    the group SPACE will disappear.
    In some installations the central instance and the message server both uses the instance number of the central instance as a base to calculate the ports.
    CentralInstance/DialogInstance = 3200, MsgServer=3600
    but, on some installations (E g Windows Cluster) this could be different.
    There you might have something like:
    CentralInstance/DialogInstance = 3200 and the MsgServer=3601
    You need to ask your sysadmin for message server port and host.

  • How can I get my ES2 loops to play correctly? I keep getting the message that the audio is not found when I drag the loops from my audio browser even though they play fine in the preview.

    How can I get my ES2 loops to play correctly? I keep getting the message that the audio is not found when I drag the loops from my audio browser even though they play fine in the preview.

    It's exactly as I stated. Whenever I try to drag these kinds of loops (ESX24 / software instrument loops? the ones marked in green with the white music note next to them) from the loop browser into the timeline a message comes up saying Audio Not Found for that loop.  And a new track is created automatically when loops are dragged into the timeline, so I'm not creating some other random / synth instrument track so I'm not sure  what the deal is... But perhaps I'll try creating a software instrument track first and then drag the loop into that track and see what happens - maybe there's something with the default settings that automatically creates audio tracks whenever loops are imported?

  • I get error message''one file not found'' when tring to sync Ipod Nano 6th gen to I tunes. Help

    I get error message''one file not found'' when tring to sync Ipod nano 6th gen to Itunes. Help

    See:
    iTunes cannot sync... apps not determined installed on...: Apple Support Communities
    installed apps could not be determined...: Apple Support Communities

  • Keep getting Disc Burner or software not found when trying to burn a CD

    I am not able to burn a playlist to a CD and get an error at the top of Itunes window "Disc Burner or Software Not Found". I have been able to burn CDs in the past with this same computer but had some issues with songs in itunes. Support had me uninstall Itunes and reinstall. I have also uninstalled the device in the device manager and re-installed it. I really don't know what to try except to ask for help here. I would appreciate any direction I can get. I have a Dell desktop XPS running on Windows 8.

    Hi daurel, 
    Thanks for participating in the Apple Support Communities. 
    It sounds like you receive the error "Disc Burner or Software Not Found" when trying to burn CDs. You mention that you've already tried removing and reinstalling iTunes, and other drivers, and these are good steps. 
    If the situation continues, be sure to try the tips in this article:
    iTunes for Windows: Optical drive is no longer recognized, or "Disc burner or software not found" alert after install - Apple Support
    Sincerely,
    Jeremy 

  • Why does FCP error "File Not Found" when I try to open my sequences????

    I recently updated all of my software and the following day I started getting errors "file not found" when I would try to open a sequence. Now all of my sequences are being lost and I am losing time and money because I can't meet deadlines! This *****!!! With one sequence I had to reedit the entire thing from scratch and when I did for some reason the old one would then open. But the next time I opened FCP both sequences would error out. Following the "file not found" the computer responds with another error "error: out of memory" What the devil is going on with this crap?

    I seem to have figured out what my problem was. After trying to build the same project (that failed on the Mac Pro) on my laptop and encountering the same errors, I realized that the problem had to be with one or more of my assets and not my new version of FCP, since my PowerBook is running FCP 5.0.4 and my Mac Pro is running FCP 5.1.2.
    In my case the "corrupt" file was a Photoshop PSD file. In the past (FCP 4.5) I was able to use PSD files with hidden layers. I would merge the visible layers into one layer, keep the hidden layers and save the file. Once in FCP, I imported the PSD file and kept right on truckin'. I've done this for years. For some reason now with FCP 5.1.2 (and 5.0.4), that's not flying anymore. Once I "Flattened" the PSD file in Photoshop (deleting all of the hidden layers) I was able to build the project without any errors.
    Interestingly, the technique I used to figure out which file was "corrupt" also allowed me to salvage parts of some of my "lost" sequences. I saw this posted in a forum at Creative Cow (creativecow.net). Basically, I opened up the project, clicked the OK button after the File Not Found error, went into the Browser, right clicked on the offending sequence, selected "Make Offline". When I double clicked the sequence it opened in the timeline with all of my assets offline. Then in the timeline, one by one, I right clicked on each clip and selected "Reconnect Media". Once I linked up the media, if I didn't get an error message, I would save as a new project (to salvage what WAS working), and go to the next clip. I did this until I found the offending PSD files.
    I hope this helps. Now it's time to play "catch-up"
    Mac Pro 3Ghz, 1GB RAM, ATI Radeon X1900 XT   Mac OS X (10.4.8)  

  • I get "disc burner or software not found" when I try to burn a playlist.

    I am now getting "disc burner or software not found" when I try to burn a playlist from iTunes version 10.6.1.7 on Windows 7 PC. I've not added any new burner software or made any software changes of any kind. I have NERO 8 and I checked the "burn rights" is set for "everyone".
    Is the any solution?
    NASA_1967 

    Could you post your diagnostics for us please?
    In iTunes, go "Help > Run Diagnostics". Uncheck the boxes other than DVD/CD tests, as per the following screenshot:
    ... and click "Next".
    When you get through to the final screen:
    ... click the "Copy to Clipboard" button and paste the diagnostics into a reply here.

  • I can find many purchases in my purchase history, but they are not found when I "Check Available Downloads." How else can I download my purchases?

    I can find many purchases in my purchase history, but they are not found when I "Check Available Downloads." How else can I download my purchases?

    what happened to the initially downloaded files ? did you make a backup ? do you use time machine ?

  • HT1923 did anyone get the apple application support was not found when trying to instal?

    I am having trouble instaling itunes.  has anyone got the apple application support was not found when trying to instal itunes?  it looks like it is not installing all of files to my computer and it can not reach a certain folder

    With the Error 2, let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
    Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
    http://www.apple.com/itunes/download/
    Download and install the free trial version of WinRAR:
    http://www.rarlab.com/
    Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
    Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
    Does it install properly for you?
    If instead you get an error message during the install, let us know what it says. (Precise text, please.)

  • Stored procedure not found when creating a new recordset binding in Dreamweaver CS6 with ColdFusion Server 11

    Stored procedure not found when creating a new recordset binding in Dreamweaver CS6 with ColdFusion Server 11.  I can see the tables and views in the database tab, but no stored procedures.  If I connect to a data source created in ColdFusion Server 6 I am able to see the stored procedures.

    Ben thanks for the reply!
    Yes that is the process I am following:
    In Dreamweaver, open the page that will run the stored procedure.
    In the Bindings panel (Window > Bindings), click the Plus button, and then select Stored Procedure.
    In the Data Source pop‑up menu, select a connection to the database containing the stored procedure
    Enter the ColdFusion Data Source user name and password.
    At this point in the procedure drop down I would get a message that said No Stored Procedure Found.
    Right now it appears to be working, I had to create a new site that pointed to the older CF 6 server's data source and create a page following the process above, then when I went back to the CF 11 site the stored procedures were now populated.  I need to make sure it is pulling from the correct server but right now it appears to be working.
    Thanks
    Dwight

  • BW: The following objects were not found when accessing server

    Hi All,
    Problem:
    - on the infoprovider, no authorization object is flagged as authorization relevant
    When trying to open the query in display mode, I get the message "The following objects were not found when accessing server", when I press cancel, the attributes are not available in the query.
    I tested with authorization objects and the only way to get these attributes visible is to put them in an authorization object with full (*) authorization for the field.
    Why does the system checks this? Because I don't want to give full authorization.
    Is there a way to unable this check, as I want the attributes to be visible (also without the *)
    +
    When a query administrator with the sufficient authorization (sap_all or the * authorization for the field in the authorization object) is creating the query in query designer including the 'attributes' which are not visible with the 'normal' authorizations, the query will not list the columns in the output when it is executed by the normal user.
    What can I do to get them visibIe in the output?
    I can not create an authorization object for each of these attributes with * (full authorization)... as it is not logic, and no authorization should need to be checked...
    Anyone who faced the same problem?
    (>> it seems the system acts as if the attributes are keyfigures, for which you need * authorization to be visisble)
    The attributes are navigational attributes.
    Thanks for your reply

    Hi Shivraj,
    BW 3.5 version
    Thanks

  • Ipad not found when connected to laptop

    Ipad not found when I connected to laptop and itunes

    iOS: Device not recognized in iTunes for OS X
    iOS: Device not recognized in iTunes for Windows

Maybe you are looking for