Logon issue, unable to connect Netweaver AS JAVA via URL

As the installation guide indicates to use URL "http://<hostname>:5<Instance no.>00" to logon the system.
The system is up and running, is there any addtional config?
How to logon the system?

Hi Spencer,
Since it is a java stack only , so there will be no user like DDIC and SAP* at database level.
SAP* user is a kernel level user (which means hardcoded at kernel level) which is used in emergency situation.
J2EE_ADMIN user is present in DUAL stack since you having a java stack only then it that case you will have administrator user.
I know the default password for DDIC , SAP* and EARLYWATCH users but not for administrator.
You can check with  default password such as 06071992 and 19920607(not sure)
The JAVA equivalents of the SAP* password, some history and a usefull tip.
With Regards
Ashutosh Chaturvedi

Similar Messages

  • IP address changed and unable to connect to the java services?

    Hi Guys,
    we had installed PI 7.1 and everything is working perfectly fine. we have moved the system to the data center from our network. The server has been assigned a new IP address. All instances (ABAP+JAVA) have come up and i was able to login the ABAP stack.
    But when i try to open http://hostname:50000/dir is not working and when i check in SMICM trace i am getting the error as conect to host:50000 failed    check the host configuration .
    I have also mapped the IP address to the host name in the host file but it did not help.
    any help would be appreciated
    Thanks,
    Srini
    Edited by: srinivas kapu on Dec 5, 2008 5:34 PM

    Hi Bhargav,
    Thanks for the quick reply. I am unable to connect to any java services like IR, ID, NWA etc with neither IP or FQDN. We did not had any issues previously with the FQDN and only change is now the IP address is changed.
    Thanks,
    Srini

  • Curve 9380 unable to connect to the internet via wifi

    I'm using curve 9380 and unable to connect to the internet via my home wifi, there is no blackberry logo beside the wifi signal symbol. I don't have this probelm if I'm using my laptop or curve 8520 to connect to the internet via the same wifi router. Please help. Thank you.

    Check firewall, if you're on wifi then try ethernet to rule out interference. It is likely a network issue.

  • Unable to connect to Deskjet 3545 via Wireless Direct from Windows 8.1 laptop (Lenovo Thinkpad E530)

    Hi, It's a newly bought printer. I am unable to connect to the printer via Wireless Direct from Windows 8.1 64bit laptop. I have enabled the Wireless Direct with security on the Printer. Connected to the Printer SSID from my laptop wifi. Created the new printer from Driver software. It discovers the printer with it's name,IP etc; Upon selecting the printer and click on 'Next' button on the screen, results in a 5 min search process and finally displays that it could not connect. I have tried pinging the printer and it's able to pingf the IP of the printer successfully. I have even tried disabling the Norton antivirus, but result is the same. regards,sathwik  

     

  • IP Printing Issue -- Unable to connect and print

    I'm trying to print to a network printer that's connected by cable to my wireless router using IPP. The error message reads "Unable to connect to IPP host." The IP address I used for the printer was obtained from the printer test page. I also specified "generic postscipt printer" in the printer setup utility window. My printer and network info as follows:
    Printer -- HP LaserJet 4MV
    Router -- Linksys Wireless G
    Computer -- Powerbook G4, OSX.4
    I've reset the printers in the Printer Utility to use the latest version driver for the HP. I can browse using my PBk so my wireless connection is working (in fact the PBk is in the same room as the router). Any suggestions would be very much appreciated.

    I don't have a manual for the printer and I'm not aware of a print server being included in the hardware. The printer is simply a HP LaserJet 4MV which has a I/O card installed with local talk, 10Base-T, parellel, and BNC connections. I'm using the 10Base-T connection to my router.
    On the test page printout, it lists several things one of which is "Server Name" but it's blank with no entry. Under the heading "Mode" the entry reads "Queue Server." Don't know if any of this is relevant.

  • OD users unable to connect to a server via afp

    We have a Mac OS 10.9.2 with Server 3.1.2.  We are able to access the server for file sharing via smb with OD accounts just fine.  But we are unable to connect to the server using afp with any OD account, only local system accounts.  I have tried turning off SMB for all of the file shares, but this did not help resolve the issue.
    The log shows a login attempt immediately followed by a logout.
    Aug  7 13:40:33 server.company.com AppleFileServer[736] <Info>: IP 192.168.101.2 - - "Login -----" -5023 0 0
    Aug  7 13:40:33 server.company.com AppleFileServer[736] <Info>: IP 192.168.101.2 - - "Logout -----" -5023 0 0
    I did edit out the user and the server name.
    Any help would be greatly appreciated.
    Thank you.

    Many Open Directory problems can be resolved by taking the following steps. Test after each one, and back up all data before making any changes.
    1. The OD master must have a static IP address on the local network, not a dynamic address.
    2. You must have a working DNS service, and the server's hostname must match its fully-qualified domain name. To confirm, select the server by name in the sidebar of the Server application window, then select the Overview tab. Click the Edit button on the Host Name line. On the Accessing your Server sheet, Domain Name should be selected. Change the Host Name, if necessary. The server must have at least a three-level name (e.g. "server.yourdomain.com"), and the name must not be in the ".local" top-level domain, which is reserved for Bonjour.
    3. The primary DNS server used by the server must be 127.0.0.1 (that is, itself) unless you're using another server for internal DNS. The only DNS server set on the clients should be the internal one, which they should get from DHCP if applicable.
    4. Follow these instructions to rebuild the Kerberos configuration on the master.
    5. If you use authenticated binding, check the validity of the master's certificate. The common name must match the hostname and domain name. Deselecting and then reselecting the certificate in Server.app has been reported to have an effect in some cases.
    6. Unbind and then rebind the clients in the Users & Groups preference pane. Use the fully-qualified domain name of the master.
    7. Reboot the master and the clients.
    8. Don't log in to the server with a network user's account.
    9. As a last resort, export all OD users. In the Open Directory pane of Server, delete the OD server. Then recreate it and import the users. Ensure that the UID's are in the 1001+ range.

  • HT4623 Unable to connect 4S to itunes via cable

    Unable to connect to Itunes via docking station

    An Apple docking station? What is happening or not happening when you try and connect?

  • Unable to connect to PC Suit via bluetooth

    I Have a Noia 6233 And IVT Bluesoil Bluetooth dongle installed on Windows XP pro SP 2.
    When I am trying to connect to PC suit via bluetooth i gets a warning "cannot use connection type. Check that all needed hardware, software, and drivers are available" When I have checked system information through - help- about nokia pc suit I found detecetd bluetooth stacks as - Microsoft (Version: 5.1.2600, Build: 2180)only
    I have nokia PC Suit 7.0.9.2 and blue soil version 1.6.1.4 release 050606 and stack version 05.04.05.20050408.
    Plz Help me me to get out of this trouble asap.

    I have the same issue.
    I'm trying to use PC suite (downloaded from nokia site as the proper one for 6230i rel 7) connecting 6230i via bluetooth. Pc and phone are "associated" but when i launch the PC suite I get an error message: "It is not possible to recognize the phone".
    I read a lot of post but nobody seems to have solved the issue!
    From Bluetooth application I can read files on pc ... so che bluetooth connection seems to work properly; it appears as a PC suite bug .. really boring!
    Nokia team can help us ?

  • N70 unable to connect phone to compter via USB hel...

    Brand spanking new N70, downloaded PC suite however not able to connect phone to compter via USB to transfer music. Can anybody help?

    Hi bento
    When you install PC Suite for first time there are TWO seperate processes, firstly installing PC Suite then returns to desktop and then secondly establishing connectivity during which "Nokia Connectivity Cable Driver" and "PC Connectivity Solution" installed.
    You could go to Setings > Control Panel > Add/Remove Programs > Repair and see if this helps
    Happy to have helped forum in a small way with a Support Ratio = 37.0

  • New install issue-unable to connect to DB server from a remote client.

    Hi experts,
    I am new to setting up oracle server so pls bear with me...
    I setup a db server (11g on top of 64bit Oracle Linux) at home (static 192.168.1.90). I verified that db, listener are up and running. However, I tried to connect to the server from a different client machine (192.168.1.108) within my home network but the server cannot be reached. I was able to ping both client and server using the IP addresses and hostnames. I followed the following steps to perform troubleshooting but was unable to move on beyond step 3, telnet-ing the server on port 1521. Can someone help me out what I should do make the port # (1521) is reachable by the client?
    1. Check with "ping" using the IP address ("ping 198.11.34.43"
    2. Check with "ping" using DNS name (e.g. "tnsping uranus")
    3. Try telnet to the IP on port 1521 (telnet 1.2.3.4 1521)
    4. Check with "tnsping" using TNS service name
    5. Invoke SQL*Plus from the OS command line "sqlplus fred@flintstone". If this fails, check to ensure that your listener is the flintstone service defined.
    6. Sign-on to SQL*Plus and connect with the TNS name ("connect fred/flintstome@service_name"
    7. Within SQL*Plus, try a select from table@remote_db_link
    thanks a lot in advance.

    user6391746 wrote:
    Hi experts,
    I am new to setting up oracle server so pls bear with me...
    I setup a db server (11g on top of 64bit Oracle Linux) at home (static 192.168.1.90). I verified that db, listener are up and running. However, I tried to connect to the server from a different client machine (192.168.1.108) within my home network but the server cannot be reached. I was able to ping both client and server using the IP addresses and hostnames. I followed the following steps to perform troubleshooting but was unable to move on beyond step 3, telnet-ing the server on port 1521. Can someone help me out what I should do make the port # (1521) is reachable by the client?
    1. Check with "ping" using the IP address ("ping 198.11.34.43"
    2. Check with "ping" using DNS name (e.g. "tnsping uranus")
    3. Try telnet to the IP on port 1521 (telnet 1.2.3.4 1521)
    4. Check with "tnsping" using TNS service name
    5. Invoke SQL*Plus from the OS command line "sqlplus fred@flintstone". If this fails, check to ensure that your listener is the flintstone service defined.
    6. Sign-on to SQL*Plus and connect with the TNS name ("connect fred/flintstome@service_name"
    7. Within SQL*Plus, try a select from table@remote_db_link
    thanks a lot in advance.solution depends upon which ERROR is thrown.
    Is COPY & PASTE broken for you?
    It is really, Really, REALLY difficult to fix a problem that can not be seen.
    use COPY & PASTE so we can see what you do & how Oracle responds.

  • RTSP Issue unable to connect server

    Please advise on how to resolve RTSP port 554 issues.

    I have that problem too.
    When my users try to connect to mms://stream.camara.gov.br/tvcamara1t200 with wccp redirection, the WMPlayer open, but not start the streaming. With explicit forward the same problem occurs.
    On the ironport i have that logs every time i try to connect: 
    1413465831.698 29 XX.XX.XX.XX TCP_MISS/302 432 GET http://stream.camara.gov.br/tvcamara1t200 - DIRECT/stream.camara.gov.br text/html ALLOW_CUSTOMCAT_12-DefaultGroup-DefaultGroup-NONE-NONE-NONE-DefaultGroup <C_Whit,4.9,-,"-",-,-,-,-,"-",-,-,-,"-",-,-,"-","-",-,-,IW_gov,-,"-","-","Unknown","Unknown","-","-",119.17,0,-,"-","-"> - "16/Oct/2014:13:23:51 +0000" - NONE
    and
    1413465173.395 6 XX.XX.XX.XX TCP_HIT/200 521 GET http://stream.camara.gov.br/tvcamara1t200.asx - NONE/- video/x-ms-asf ALLOW_CUSTOMCAT_12-DefaultGroup-DefaultGroup-NONE-NONE-NONE-NONE <C_Whit,4.9,-,"-",-,-,-,-,"-",-,-,-,"-",-,-,"-","-",-,-,IW_gov,-,"-","-","Unknown","Unknown","-","-",694.67,0,-,"-","-"> - "16/Oct/2014:13:12:53 +0000" - NONE
    Some one have advises?

  • Versamail issue - unable to connect to sbcglobal email servers

    I am attempting to access my sbcglobal email account. I believe I have everything set up correctly, but I continue to receive the following error message: "There is a delay in server communication causing a timeout. Please try again." It appears that I am connecting to the mail server successfully, but I don't get any farther than that. Does anyone know what I may be doing wrong?
    Post relates to: Palm TX

    I recall SBC/Yahoo DSL recently changed the port settings for their email servers. Check the website and make sure you have the correct ones set in VersaMail.
    WyreNut
    I am a Volunteer here, not employed by HP.
    You too can become an HP Expert! Details HERE!
    If my post has helped you, click the Kudos Thumbs up!
    If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

  • Unable to connect to the UCCX via VPN

    Hello, i have an issue,
    when i am trying to login to the supervisor desktop agent via VPN, an error occurred
    "unable to create connection with web-server. Chech the server with address *.*.*.*:80"
    thankx in advance

    With the script editor, the login prompt requires username/password/IP address of CRS server. So one would think that name resolution would not be required - yet the application references Call Manager by name and my VPN client could not resolve the name until I created a host file entry.
    But this doesn't appear to be related to your issue. From your VPN client, are you able to ping your server IP address?

  • Unable to connect to Deployment share via the 2012 Update 1 workbench.

    Hi Everyone,
    This is a tricky one, I've been scratching my head for a few days now. I have a MDT deployment share, which lives on a server, for argument sake, lets call it: MDT-01. Via the Servers MDT Workbench, I can connect to the deployment share just fine, from
    any PC, other than my main PC (which is running Windows 8.1), I can connect to the deployment share just fine. If I load the MDT Workbench on my main PC, it just has a deployment share folder with a red cross on it. If I attempt to remove it, it crashes the
    MMC, if I try and open the same deployment share it crashes the MMC. If I give the Deployment Share a different share name, it errors and says I can't use an existing deployment share folder.
    I used to be able to connect to the share just fine, but since the last couple of days I've not been able to connect.
    Further investigation with PowerShell reveals that the console thinks it has a persistent drive, DS001, but the path is blank, as in ''.
    Restore-MDTPersistentDrive -verboseVERBOSE: Restoring drive 'DS001' with path ''WARNING: Unable to restore drive DS001.
    If I try to remove the Persistent drive, it errors, and if I try to add any new drive to either the same deployment share, or an alternative, it fails.
    I can use the New-PSDrive and Remove-PSDrive Powershell commands to create/remove a replicated drive, but that doesn't actually change the Path value in the Get/Restore-MDTPersistantDrive, as they seem to be separate, even though I think they should
    be linked.
    The Internet has been no help, so I'm asking the Microsoft crew to be helpful, and not just do the usual "This is posted in the wrong place, this question will now be closed... etc, etc!" This is an MDT question, not a Powershell question, I just
    need anyone who has indepth MDT knowledge to look at this.
    To make clear, this is not a question about a client connecting to the deployment share, that all works fine, and I can update the deployment share fine from any other workbench.
    I cannot connect to my deployment share, from my local MMC MDT workbench, as it thinks it already has one, but with a blank path. I've uninstalled, and reinstalled both the MDT, and ADK components on my Local PC, but I still cannot connect to the Share.
    My question is this: The files/registry that stores this DS001 path setting is clearly local to my PC, but where is it, I've search the reg, and I've check files, but to no avail, I'm likely to rebuild my PC because of this, but I'd rather not if I can help
    it.
    Any Ideas people?
    P.s. Sorry if this post seems rude, I do appreciate the help, I just don't have time for being messed about, as we're migrating our XP system to 7, and with less than 60 days remaininf, I could do without this... Thanks for understanding. :D

    Persistent drives are just a easy way for the MDT console to keep track of the Deployment Shares you like the most (think of it as "pinning" Deployment Shares to the console).
    The list of persisted Deployment Shares are per user and stored in the file:
    "%AppData%\Microsoft\Microsoft Deployment Toolkit\User.Config"
    Mine looks like:
    <?xml version="1.0" encoding="utf-8"?>
    <configuration>
    <userSettings>
    <MDTProvider>
    <setting name="Drive1Name" serializeAs="String">
    <value>DS001</value>
    </setting>
    <setting name="Drive1Path" serializeAs="String">
    <value>C:\DeploymentShare</value>
    </setting>
    <setting name="Drive1Description" serializeAs="String">
    <value>MDT Deployment Share</value>
    </setting>
    </MDTProvider>
    </userSettings>
    </configuration>
    Make sure the Drive Path points to something valid, otherwise, I would delete (rename) the file and let MDT re-create the file.
    I hope this answers your question.
    Keith Garner - keithga.wordpress.com

  • I am unable to connect to the internet via WiFi connection.  My iphone works just fine.  Please advise possible solutions.

    I have an iPad on v5.01.  I am unable to use my wifi network to connect to the internet.  My wife's iPad works fine.  Please advise any potential solutions.

    Have you checked to see if your WiFi router needs to have your iPad's MAC address specifically permitted to use WiFi?  Some WiFi routers have a section in the settings called "Access List", possibly under "Security".
    You can find the MAC address in Settings > General > About > Wi-Fi Address

Maybe you are looking for