Logon minisap

Hi,
I have install minisap 4.6 successfully .
On the logon screen, I entered the -
username:
bcuser
and password:
minisap
All in small letter.
And when i press the ENTER key, it show an error message
on the status bar:
"No logon possible (no hw ID received by mssg server)"
And I can't logon to the SAP .
Anyone got an idea ?
thanks.

check out the following link, it has answer for your problem
http://www.sap-img.com/basis/common-mini-sap-installation-question-and-answers.htm
<i>Error message at logon: No Logon possible (no hw ID received by mssg server)
The usual cause for this error is that system file ...\system32\...\etc\services already contains an entry for port 3600 during installation. If so, mark the entry with # to deactivate it.</i>
Regards
Raja

Similar Messages

Nedd your help for aceesing database in minisap 4.6 d (please help)

hi all sap masters please help me.
i have installed the minisap 4.6d system in the windows 200 prof os.
i had the following problem in my minisa access.
while Displaying table contents with transactions SE11 or SE16
gives an error "No changes on SAP objects allowed".
while Accessing the logical database F1S gives a syntax error because the
include DBF1SF01 is missing.
so i have used the mbspatch1 that comes with the cd.
i have copied the mbscorr0104200 file in the directory '<MBS_DIR>\trans\tmp' as mentioned.
and i have followed the steps as follows.but i have the same problem.please have a look at the
process below and hel me to make it work roerly.
this roblem is really eating me a lot and since many in this forum are sap master,thought
you all can help me please.
C:\>cd mbs
C:\MBS>dbenv.cmd
C:\MBS>REM Setting environment for db connect to MBS
C:\MBS>set dbms_type=mss
C:\MBS>set DIR_LIBRARY=.
C:\MBS>set MSSQL_DBNAME=MBS
C:\MBS>cd trans\tmp
C:\MBS\TRANS\TMP>r3trans -i mbscorr01042000
'R3TRANS' is not recognized as an internal or external command,
operable program or batch file.
hope there was some problem here only,but to continue i have pasted the r3trans in the folder C:\MBS\TRANS\TMP
C:\MBS\TRANS\TMP>r3trans -i mbscorr01042000
This is R3TRANS version 6.05 (release 46D - 04.10.00 - 09:16:00).
2EETW169 no connect possible: "connect failed with DBLI_RC_LOAD_LIB_FAILED."
R3TRANS finished (0012).
then i have done the generate program step .
(4) Generate programs:
     - Logon as user BCUSER to the MBS system.
     - Start transaction SE38.
     - Enter the program 'SAPLSTRD' and select 'Program -> Generate'.
     - Enter the program 'SAPDBF1S' and select 'Program -> Generate'.
while generating the second program i got the error Accessing the logical database F1S gives a
syntax error because the include DBF1SF01 is missing.
hope somebody could have got the same problem.so please help me with your experience.iam new to this
minisap problems.
again all the roblem of acessing the tables exit even after doing the steps.
hope i have explained my problem very clearly.
please find where i went wrong or suggest some help to acess the datadase tables with the minisap cd.

all webas downloads (ABAP, java)
https://www.sdn.sap.com/irj/sdn/downloaditem?rid=/library/uuid/cfc19866-0401-0010-35b2-dc8158247fb6
webas 6.40 ABAP server
https://www.sdn.sap.com/irj/sdn/downloaditem?rid=/webcontent/uuid/b2918eea-0601-0010-6284-e6cb7eee4399 [original link is broken]
SAP gui
https://www.sdn.sap.com/irj/sdn/softwaredownload?download=ftp://ftp.sap.com/pub/sdn/devkits/netweaver/abap/50072743_4.zip&df=0
Regards
Raja

Problem with accessing database in minisap 4.6 d( very urgent need ur help)

hi all sap masters please help me.
i have installed the minisap 4.6d system in the windows 200 prof os.
i had the following problem in my minisa access.
while Displaying table contents with transactions SE11 or SE16
gives an error "No changes on SAP objects allowed".
while Accessing the logical database F1S gives a syntax error because the
include DBF1SF01 is missing.
so i have used the mbspatch1 that comes with the cd.
i have copied the mbscorr0104200 file in the directory '<MBS_DIR>\trans\tmp' as mentioned.
and i have followed the steps as follows.but i have the same problem.please have a look at the
process below and hel me to make it work roerly.
this roblem is really eating me a lot and since many in this forum are sap master,thought
you all can help me please.
C:\>cd mbs
C:\MBS>dbenv.cmd
C:\MBS>REM Setting environment for db connect to MBS
C:\MBS>set dbms_type=mss
C:\MBS>set DIR_LIBRARY=.
C:\MBS>set MSSQL_DBNAME=MBS
C:\MBS>cd trans\tmp
C:\MBS\TRANS\TMP>r3trans -i mbscorr01042000
'R3TRANS' is not recognized as an internal or external command,
operable program or batch file.
hope there was some problem here only,but to continue i have pasted the r3trans in the folder C:\MBS\TRANS\TMP
C:\MBS\TRANS\TMP>r3trans -i mbscorr01042000
This is R3TRANS version 6.05 (release 46D - 04.10.00 - 09:16:00).
2EETW169 no connect possible: "connect failed with DBLI_RC_LOAD_LIB_FAILED."
R3TRANS finished (0012).
then i have done the generate program step .
(4) Generate programs:
     - Logon as user BCUSER to the MBS system.
     - Start transaction SE38.
     - Enter the program 'SAPLSTRD' and select 'Program -> Generate'.
     - Enter the program 'SAPDBF1S' and select 'Program -> Generate'.
while generating the second program i got the error Accessing the logical database F1S gives a
syntax error because the include DBF1SF01 is missing.
hope somebody could have got the same problem.so please help me with your experience.iam new to this
minisap problems.
again all the problem of acessing the tables exit even after doing the steps.
hope i have explained my problem very clearly.
please find where i went wrong or suggest some help to acess the datadase tables with the minisap cd.

all webas downloads (ABAP, java)
https://www.sdn.sap.com/irj/sdn/downloaditem?rid=/library/uuid/cfc19866-0401-0010-35b2-dc8158247fb6
webas 6.40 ABAP server
https://www.sdn.sap.com/irj/sdn/downloaditem?rid=/webcontent/uuid/b2918eea-0601-0010-6284-e6cb7eee4399 [original link is broken]
SAP gui
https://www.sdn.sap.com/irj/sdn/softwaredownload?download=ftp://ftp.sap.com/pub/sdn/devkits/netweaver/abap/50072743_4.zip&df=0
Regards
Raja

Please help to acess database in minisap 4.6 d

hi all sap masters please help me.
i have installed the minisap 4.6d system in the windows 200 prof os.
i had the following problem in my minisa access.
while Displaying table contents with transactions SE11 or SE16
gives an error "No changes on SAP objects allowed".
while Accessing the logical database F1S gives a syntax error because the
include DBF1SF01 is missing.
so i have used the mbspatch1 that comes with the cd.
i have copied the mbscorr0104200 file in the directory '<MBS_DIR>\trans\tmp' as mentioned.
and i have followed the steps as follows.but i have the same problem.please have a look at the
process below and hel me to make it work roerly.
this roblem is really eating me a lot and since many in this forum are sap master,thought
you all can help me please.
C:\>cd mbs
C:\MBS>dbenv.cmd
C:\MBS>REM Setting environment for db connect to MBS
C:\MBS>set dbms_type=mss
C:\MBS>set DIR_LIBRARY=.
C:\MBS>set MSSQL_DBNAME=MBS
C:\MBS>cd trans\tmp
C:\MBS\TRANS\TMP>r3trans -i mbscorr01042000
'R3TRANS' is not recognized as an internal or external command,
operable program or batch file.
hope there was some problem here only,but to continue i have pasted the r3trans in the folder C:\MBS\TRANS\TMP
C:\MBS\TRANS\TMP>r3trans -i mbscorr01042000
This is R3TRANS version 6.05 (release 46D - 04.10.00 - 09:16:00).
2EETW169 no connect possible: "connect failed with DBLI_RC_LOAD_LIB_FAILED."
R3TRANS finished (0012).
then i have done the generate program step .
(4) Generate programs:
     - Logon as user BCUSER to the MBS system.
     - Start transaction SE38.
     - Enter the program 'SAPLSTRD' and select 'Program -> Generate'.
     - Enter the program 'SAPDBF1S' and select 'Program -> Generate'.
while generating the second program i got the error Accessing the logical database F1S gives a
syntax error because the include DBF1SF01 is missing.
hope somebody could have got the same problem.so please help me with your experience.iam new to this
minisap problems.
again all the roblem of acessing the tables exit even after doing the steps.
hope i have explained my problem very clearly.
please find where i went wrong or suggest some help to acess the datadase tables with the minisap cd.

all webas downloads (ABAP, java)
https://www.sdn.sap.com/irj/sdn/downloaditem?rid=/library/uuid/cfc19866-0401-0010-35b2-dc8158247fb6
webas 6.40 ABAP server
https://www.sdn.sap.com/irj/sdn/downloaditem?rid=/webcontent/uuid/b2918eea-0601-0010-6284-e6cb7eee4399 [original link is broken]
SAP gui
https://www.sdn.sap.com/irj/sdn/softwaredownload?download=ftp://ftp.sap.com/pub/sdn/devkits/netweaver/abap/50072743_4.zip&df=0
Regards
Raja

MiniSAP 4.6 installation error COMCREATESERVERPORT

Hi All,
I am trying to install MiniSAP 4.6 in my laptop. I did install MS loopback adapter, checked for no entry of port 3600 and hosts file with local ip address.
When I started the setup.bat, it asked for the port number and on clicking Next, I get the error,
Error: INSTGUI ComCreateServerPort.
Please help me to resolve this problem.
Thank
Senthil

Hello,
Please follow the following sequence to install minisap....
Step to install minisap:
1) Install Microsoft Loopback Adapter.
2) Add in this line in your host file (C:\WINDOWS\system32\drivers\etc)
127.0.0.1 localhost
10.10.0.10 your pcs name
3) Put in the minisap cd to start installing.
4) It will take 15 mins to install. After succesful installed, install the GUI sap logon screen and follow the step in the Installation Guide in the CD.
You have successfully install Minisap
Thanks
Give reward points

Minisap 4.6 login Problem

Hi All,
I have installed minisap 4.6c in my pc... my os is Win XP service pack 2.... i faced the following problem when i tried to logon..
description : MBS
SID :MBS
application server : my pc name or IP address
sap system : R/3
system number : 00
I first execute Start SAP MBS engine.. then i tried to logon but it showed the following error message:
Sapgui.exe
Failed to set socket option TCP_NODELAY (setsockopt)
An operation was attempted on something that is not a socket.
Pls Help me...It is very very important to me
Thanks
Message was edited by:
Keshri Shailendra

thanks alot !!!!
Now I have found the answer i just uninstall the AGV internet security and now it is working properly............

Unable to create company code setup in Minisap 4.6D

Hi,
I have installed MiniSAP 4.6D on Windows XP successfully that i have got user ID screen and logon and inter SAP Easy Access but i have found only three menu path options.Note the following name's and suggest where can i set all menu access listing
<b>SAP Menu
================
   Office
   Information Systems
   Tools</b>
But how can view another menu path like ACCOUNTING & LOGISTIC menu's.
Also confirm how can create a company code ? through menu path.
Best regards,
Muhammad Ahmed

Dear Maurice,
Thank you for exact reply but one thing more clear to me where i can download demo R/3 or any ECC versions.
I have urgently required for FICO paractice for certification papers.
Pls help me asap.
Best regards,
Muhammad Ahmed

N4S Test Drive New License not Allowing Logon (error in license check)

I reinstalled my N4S testdrive after a NIC failure caused all sorts of problems - the demo license had expired, so I requested and received a new demo license from SAP.
I've installed the license via SLICENSE, and the license is showing as successfully installed, and has the green light next to it. However, I can only logon as SAP* - none of the other created users can logon - the error message on client 001 is:
Logon not possible (error in license check).
I've reinstalled the license, but this hasn't helped. I'm wondering if there is something still on my system pointing to the old expired license. Has anyone come across this before or have any ideas?
Many thanks.

Hi,
i had same problem and on tr "\nslicense", on tab "Digitally-Signed licenses", on the left of message "A valid license key is required to operate this system" , there's the name of product (of course).
If you request your license key on http://service.sap.com/sap/bc/bsp/spn/minisap/minisap.htm there are various system Ids with the same name.
In my product "NetWeaver_ADA" the correct license is the second of three products with name "NPL - SAP NetWeaver 7.02" . When you receive your license via mail you have to find "SWPRODUCTNAME=" , in my case i found "SWPRODUCTNAME=NetWeaver_ADA" because that's my product.
Hi have requested 3 licenses and lost 4 hours,
regards

MiniSAP Use for a Thesis Project

Hello guys,
I am a pre-graduate student from a university in Perú. I want to make my thesis implementing let's say a new module in SAP: reports, tables, programs, functions, etc.
I just downloaded MiniSAP to see if it was possible to make it run on my computer and if I could develop there properly.
I have 2 questions.
1. Is it allowed for me in terms of licence and development to make my thesis project in MiniSAP? It is not for commercial purposes. Do I need to have any special access like user on sapnet or something like that to renew my licence each 90 days for continuing my development ?
2. My MiniSAP is installed in a VirtualBox instance with windows server 2003. I have a problem. When I connect from Windows server itself through the SAP logon using the IP address that I get through ipconfig in the cmd, I have no problems, but when I try to do the same from the main system ( Windows 7 ) , I can not get the connection. ( Virtualbox is installed in the Windows 7 ). I also get no response when I ping the IP address of the windows server from Windows 7 .
Edited by: gonzalo1803 on Feb 22, 2011 1:30 PM

Hi,
You can renew your license after 90 days, however, I don't know if this is allowed according to license terms. See part 4 in my blog: [HeiDoc.net|http://www.heidoc.net/joomla/en/development/13-sap-and-xslt/6-tutorial-how-to-install-and-use-the-mini-sap-system]
2. Try disabling the firewall in your VM.
Best wishes,
Jan

NetWeaver 7.02 ABAP Trial Version, instalation OK. Logon FAIL

Hi everyone:
I downloaded trial version, apparently all it's ok.
I have SAP Management console and Start NSP with Command prompt, but SAP Logon 720 it's empty, I do not have any conexion.
Into documentation dochtmlindex.htm, I found this tip:
After installing the application server you can log into the system via web gui at http://localhost:8000/sap/bc/gui/sap/its/webgui?sap-client=000 with user bcuser and password minisap.
This step do not work in my internet explorer, my port 8000 is open, please helpme.
Could you help me?
Regards
José Luis

Hi, i see you have this version up and running? but what username or password do you use?? i try all standards i believe, control, dbaadmin etc. but noting seems to work.
Also i did install a sap client on other computer to try to login.. but also here not successfull... PLS. HELP ME.. I fight already many days with this issue. Even the reinstall did not lead that i can login
Antoine

Minisap Installation Problem

Hi Everybody,
I had an older installation of Minisap on my NB...I was testing and learning ABAP on it. Since I am using a new book with examples based on a newer version of minisap I wanted to install the latest version of it.
Doing so, I am getting errors. By the installation everything seems to work right, but when I try to logon to the system (also through the SAP MMC) a "connection failed" Error pops up... I was analyzing this issue and I realized that after the (re)installation the folder "sapdb" (I think it is the MaxDB Database installation) doesn't exist.
I think there is something, somewhere that doesn't make it possible to install the MaxDB. I already checks the registry, cleaned it and so on... but nothing helps.
Can somebody please help me?! Thank you in advance.

Hi Kiran,
thank you for the quick answer. The first link you sent brings me to the start page of sdn..so i don't really know which information is the important one.
The second link was more an explanation of how to install the minisap...I already know it.
Is there something else to do in order to completely clean the system from a minisap installation (incl. maxdb instances and registries ans services, etc... without reinstalling the OS )?
This is the error popup information:
SAP-REL 710,0,51 RFC-VER 3 913191 MT-SL
T:4016 Error in program 'mmc': ======> SAP_CMINIT3 : rc=20 > Connect to SAP gateway failed
Connect_PM GWHOST=Azurix, GWSERV=sapgw00, SYSNR=00
LOCATION    CPIC (TCP/IP) on local host with Unicode
ERROR       partner '192.168.1.4:3300' not reached
TIME        Sun Jul 15 16:47:32 2007
RELEASE     710
COMPONENT   NI (network interface)
VERSION     39
RC          -10
MODULE      nixxi.cpp
LINE        3068
DETAIL      NiPConnect2: 192.168.1.4:3300
SYSTEM CALL connect
ERRNO       10061
ERRNO TEXT WSAECONNREFUSED: Connection refused
COUNTER     1

MiniSAP login problem

Hii All,
This is Dwaipayan... I have installed minisap 4.6c in my pc... my os is Win XP service pack 2.... i faced the follwing problem when i tried to logon..
description : MBS
application server : my pc name
sap syatem : R/3
system number : 00
I first execute Start SAP MBS engine.. then i tried to logon but it showed the follwing error message:
Sapgui.exe
Failed to set socket option TCP_NODELAY (setsockopt)
An operation was attempted on something that is not a socket.
Pls Help me...It is very very important to me
Thanks

Hi,
SID is just ur system name i think it should be MBS because u have installed minisap 4.6d. so in the Sap Gui u have to enter the following.
Description = anytthing
Application Server = pc name or ip Address of server
System id = MBS
System number = 00
Sap System = R/3
check this link on the right right of page.u can download the latest GUi from here
<a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/downloaditem?rid=/library/uuid/cfc19866-0401-0010-35b2-dc8158247fb6">download Sap Gui</a>
Hope it helps
Regards
Subhash
Message was edited by: Subhash Chandra

Can't start minisap......

I have installed minisap on my PC. I have followed the instruction for the installation.
I have created MBS, with System number = 00, Application server = my computer name.
The MSSQLServer and Start SAP MBS are both running, but when I tried to logon, I got this message.
partner not reached(host mypc, servie sapdp00)
Componet    NI(network interface)
Version     34
Return code -10
Module      ninti.c
Line        1008
Detail      NiPConnect2
System call SO_ERROR
Error no.   10061
Error text WSAECONNREFUSED: Connection refused
Counter     1
Many thanks in advance.

Hi Gregor,
I have tried to switch off the firewall and run it.
In the Start SAP MBS window (DOS-Prompt window), I saw this,
work process W1 died => tskh_init: db_connect
work process W0 died => tskh_init: db_connect
DISPATCHER died => DpEnvCheck: no more work process
I guess it is stuck at when it was trying connect to something.....

MiniSap for Windows 7 64Bits

Hi people,
I have a notebook 64bits with Windows 7 installed.
I need to install the MiniSap program to pratice ABAP.
Someone knows where I find this program to download ?
tks for all,
Flavio

Hello Colleagues,
Message server is up & running but dispatcher is currently down.
when checked the logs in work directory:
Wed Mar 30 16:25:02 2011
DP_FATAL_ERROR => main: rdisp/myname=VirtualXP-84588_NSP_00 exceeds 20 characters
DISPATCHER EMERGENCY SHUTDOWN ***
DISPATCHER EMERGENCY SHUTDOWN => main: rdisp/myname=VirtualXP-84588_NSP_00 exceeds 20 characters
NiWait: sleep (5000ms) ...
NiISelect: timeout 5000ms
NiISelect: maximum fd=1
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Mar 30 16:25:07 2011
NiISelect: TIMEOUT occured (5000ms)
DpHalt: shutdown server >< (normal)
DpJ2eeDisableRestart
Switch off Shared memory profiling
ShmProtect( 57, 3 )
ShmProtect(SHM_PROFILE, SHM_PROT_RW
ShmProtect( 57, 1 )
ShmProtect(SHM_PROFILE, SHM_PROT_RD
call semaphore clean-up function ...
***LOG Q0E=> DpSigGenHandler, Exception (c0000005) [dpnttool.c   439]
C-STACK -
SAP (R) - R/3(TM) Callstack, Version 1.0
Copyright (C) SAP AG. All rights reserved.
Application exception occurred:
Exception : c0000005 (Access Violation)
App       : disp+work.EXE (pid=3064)
When      : 3/30/2011 16:25:8.649
Threads   : 1
Computer Name       : VXP-84588
User Name           : SYSTEM
Number of Processors: 1
Processor Type: x86 Family 6 Model 37 Stepping 5
Windows Version     : 5.1 Current Build: 2600
State Dump for Thread Id bfc
eax=00000000 ebx=00000000 ecx=00000000 edx=00000000 esi=00000000 edi=00000000
eip=0042d04a esp=0440e8ec ebp=0440f938 iopl=0         nv up ei pl zr na po nc
cs=001b ss=0023 ds=0023 es=0023 fs=003b gs=0000             efl=00010246
function : <nosymbols>
        0042d031 33db             xor     ebx,ebx
        0042d033 33f6             xor     esi,esi
        0042d035 395d08           cmp     [ebp+0x8],ebx          ss:0881cd1a=????????
        0042d038 741f             jz      TmConnect+0x28323 (0042d059)
        0042d03a 8b7508           mov     esi,[ebp+0x8]          ss:0881cd1a=????????
        0042d03d a1240e1f02 mov eax,[EntLev+0x5dd6b8 (021f0e24)] ds:021f0e24=00000000
        0042d042 4e               dec     esi
        0042d043 f7de             neg     esi
        0042d045 1bf6             sbb     esi,esi
        0042d047 83e6c6           and     esi,0xc6
FAULT-> 0042d04a 889824170000     mov     [eax+0x1724],bl              ds:00001724=??
        0042d050 891d54081f02                                    ds:021f0854=00000000
                                  mov     [EntLev+0x5dd0e8 (021f0854)],ebx
        0042d056 83c63c           add     esi,0x3c
        0042d059 a164081f02 mov eax,[EntLev+0x5dd0f8 (021f0864)] ds:021f0864=00000000
        0042d05e 3bc3             cmp     eax,ebx
        0042d060 0f84b4000000     je      TmConnect+0x283e4 (0042d11a)
        0042d066 ff3558081f02                                    ds:021f0858=00000000
                                  push    dword ptr [EntLev+0x5dd0ec (021f0858)]
        0042d06c 50               push    eax
        0042d06d e8d2390100       call    TmConnect+0x3bd0e (00440a44)
        0042d072 84c0             test    al,al
        0042d074 59               pop     ecx
        0042d075 59               pop     ecx
--> Stack Back Trace <--
FramePtr ReturnAd Param#1 Param#2 Param#3 Param#4 Function Name
0440f938 00410b39 00000001 002c66a8 00000002 0440fdbc TmConnect
0440f974 00587e4c 00000000 00000000 0440fdbc 00ffa921 TmConnect
00000000 00000000 00000000 00000000 00000000 00000000 DpTrc
Wed Mar 30 16:25:08 2011
call clean-up function ...
ERROR => SigICallExitRoutine: not initialized [signt.c      304]
return from clean-up function ...
here,i tried changing the computer name as well,but still i could not logon to NSP through SAP logon pad.Kindly have a look.
everything looks fine from installation point of view except dispatcher is down & the logon error says resource temporarily unavailable.
Many Thanks,
Nithin

Unable to extend License of MiniSAP 4.6D ABAP Objects by Kruger & keller

Hello people
Unable to extend License of MiniSAP 4.6D ABAP Objects by Kruger & keller
I am not able to execute the instn mentioned in the Help file also.
Please suggest.
Also How do i execute SAPLICENSE.exe -get.
Please Help.
Regards
Vinay

First up you need MBS up and running. So start the database and MBS system.
Now you have a choice of methods to do this, from the OS or within SAP.
Within SAP is easier; logon to SAP with user ID SAP* (password 'pass') goto transaction SLICENSE.
From the OS; Start a new DOS window (run -> cmd), change to the MBS directory (c:\local\..>CD c:\mbs), execute the environment variables (c:\mbs>dbenv.cmd), now run the saplicense program (c:\mbs>SAPlicense.exe -get).
When you get the new license use the appropiate method and flags.

Logon minisap

Similar Messages

Maybe you are looking for