Logon screen represente​d less than 2880x1620 when set up in full resolution

Hello
I had to reinstall my new W540 20BG with Win7 Ultimate from scratch and integrated also all current drivers. So I had no problems.
I have set the highest resolution of 2880x1620. Now on the logon screen the Windows background picture will appear smaller (approximately about 2048x1152). If I change the resolution to 2048x1152 or smaller, then the picture fills the screen. If needed I can take a photo from the logon screen and upload it.
I tried to find any settings by NVidia driver, nothing found, nothing have effects.
a) Whats is the reason for this issue?
b) How I can fix it?
Could someone help me? Thanks.
Best regards.

Maybe I'm wrong, but the best option would be to work with percentages, not pixels.
You can see examples in this Adobe links:
CSS Percentage vs. Pixels - Re: How can convert the em,px,pt and % in css - CSS Width percentage layout issues - Re: DW CC Fluid grid layout how to change px width for desktop layout
I hope it has been helpful
sorry, I forgot this link in Adobe site: Ten things you need to know about responsive design | Adobe Developer Connection
See you,
Masters and MBA

Similar Messages

  • Does specified lsn should greater than or less than min_autonosync_lsn when setting up a "initialize from lsn" subscription?

    Hello,
    For setting up a "initialize from lsn" type subscription successfully, Does the lsn for @subscriptionlsn parameter need greater than or less than the  min_autonosync_lsn (syspublications) ?
    I read two versions of this: one is lsn >min_autonosync_lsn ,the other is lsn <min_autonosync_lsn. I agree lsn >min_autonosync_lsn.
    Thanks

    Basically it means that the lsn should be retrievable somewhere in the distribution database.  So it has to be> than the min otherwise you would need to reinitialize.
    Note that this is only important when you are mirroring the subscription database.
    looking for a book on SQL Server 2008 Administration?
    http://www.amazon.com/Microsoft-Server-2008-Management-Administration/dp/067233044X looking for a book on SQL Server 2008 Full-Text Search?
    http://www.amazon.com/Pro-Full-Text-Search-Server-2008/dp/1430215941

  • Can anyone confirm if you can in fact shoot/edit (perhaps using a less than best video setting) on a Canon XA20 or Sony HXR-NX30U with iMovie 10 (Mavericks)? I do not want to convert files. Thx.

    Can anyone confirm if you can in fact shoot/edit (perhaps using a less than best video setting) on a Canon XA20 or Sony HXR-NX30U with iMovie 10 (Mavericks)? I do not want to convert files. Thx.

    Hi road.north,
    Welcome to the Support Communities!
    The article below will help you determine which cameras are supported for iMovie '10
    Apple - iLife Help - iMovie Supported Cameras
    http://help.apple.com/imovie/10/cameras/en/index.html?lang=en_US
    Cheers,
    - Judy

  • Screen Saver lasts less than a second (Wireless USB Mouse)

    When I put my pointer in the hot corner (lower left), the screensaver activates for less than a second, then goes off as if I've moved the mouse or pressed a key.  The pointer disappears, then reappears immediately in the corner before the screensaver goes off, so that makes me think the computer is thinking that the mouse is moving (which it is not) and thus turns off the screensaver.
    I recently updated to Mavericks with the exact same mouse I was using before, which is a Microsoft Wireless Mouse 5000 with Intellipoint installed.  The only way to switch off the mouse would be to disconnect the USB or remove the batteries from the mouse.
    http://jimlapbap.com/files/preview/Screensaver.mov
    Also, the screensaver is set to go on after 20 minutes, but it never does.
    Any advice/help would be appreciated.

    The problem is no longer there.  Repairing permissions may have been the solution, but I'm not sure because I tried a lot of things.

  • Video quality is less than expected when playing inside Flash

    iam using flv video. i played it back in many ways , with flv player that comes with flash ,as embedded in the time line and using external class that use  NetStream ,the video quality was less than playing the same video  outside the flash invironment using any  stand  alone video player like media player classic .
    why is that happening , did i miss some thing ?
    is there a setting  that i should do to play hd video in high quality ?
    i have tried setting stage.quality to BEST but it didn't affect the video quality ?
    any help  ?

    can't I just change the "Easy Setup" settings so it would work without degrading the input and subsequently the output? Sorry, I don't quite grasp "fixed-resolution" yet so may be asking something that doesn't have an answer.
    FCE only works with certain presets available in the Easy Setup menu. If your footage isn't one of these resolutions then FCE will conform it to the sequence you have selected, downgrading the footage in the process. Final Cut Pro gives you the option to make a sequence set to the dimensions you want it to be, without worrying about whether your image matches a preset.

  • Is there a big differnce when you check "include full-resolution photos"

    I was wondering the major difference, becuase if I wanted to transfer the images from the ipod to another device, would that be the right way, and will the full res pics take up to much space on the ipod hard drive.
    also how much compression is used when you don't use full res images?

    if you're looking at tranferring photos from the ipod to something else, it's important to include the full resolution photos. if you have that box unchecked, the only images you get on the ipod are the little "thumbs" that display on the ipod itself.
    the full res photos take up some room. i've got a test folder of 4 photos on attractive beast. "Photos" shows as 10.8 MB if i'm including the full res ... but only as 3.1 MB i'm not including the full res.

  • How can you fix transparency less than 100% when drawing multiple shapes with the pencil tool?

    I draw a (fill only) shape at 50% with the pencil tool and when I go to draw another, the transparency jumps back to 100%. I would like it to stay at 50% for every mark I make, anyone know how? I wish to build up multiple semi-translucent vector shapes like in the attached image.
    Many Thanks.
    Mark

    In the bottom of the Appearance Palette, toggle the (deep breath) New Art Maintains Appearance / New Art Has Basic Appearance button (pant pant).
    I leave it to you to do three things:
    1. Figure out which state of that stupidly-designed single button means which setting.
    2. Figure out if the stupidly-designed tooltip that appears when you hover over that stupid button means:
    A. ...that what the tooltip reads is the current setting, or...
    B. ...that what the tooltip reads is the setting you will get if you click the stupidly-designed single button.
    3. Remember what you figured out the next time you need to visit that stupidly-designed button.
    Adobe doesn't understand this is a simple yes/no decision, and that a far more intuitive simple labeled checkbox will do.
    JET

  • Add new button on SAP R/3 Logon screen( R/3.4.7) to "Forgot the Password"

    HI
    We wanted to add a new option( Forgot password option) on the SAP Logon screen to Change password when they forgot the password.
    But the user exit EXIT_SAPLSUSF_001 only triggers after the Logon.
    *Our Current SAP Version is SAP R/3 4.7
    Is there any other way, which allows,
    1. add a button/ menu option on R/3 LOGON screen to include :"forgot apssword" option.when preseed/selected, it has to execute some piece of  code( our own)  with validation to change the password.
    OR. is it possible to add an hyperlink next to password, and when pressed to execute /call a BSP(??) application to change the password in R/3. ?
    Thanks.

    Hi,
    I think you can try with  GuiXT script.
    Thanks,
    Anitha A

  • Mac Pro wont boot to logon screen

    Help!!
    A couple of weeks ago, before upgrading to 10.5.7, my screen would freeze like a picture with the mouse cursor able to move but nothing would respond. I generally had to use the main power button at least 5 times before the display would show anything and get to the logon screen. It seemed to happen when moving the mouse cursor to the top right corner of my display, which I use to "Display all windows". I have since updated to 10.5.7 but was still getting the problem. A couple of times the display just shut off on its own, there was a click within the computer then the display went blank. This has happened a few times.
    Last night the screen froze again and I tried the usual reboot about 40 times and only a few times got the Grey Apple screen but would not get any further. If I had a blank screen on reboot the hard drive would be spinning at full speed and would not stop until I switched the machine off.
    Now it has a mind of its own! If I get to the Grey screen it now has the sun ray symbol going round and sits like that for some minutes then the machine reboots and it goes through this cycle repeatedly on its own!
    I can't get it to boot into the logon screen at all now.
    I have tried various startup key options to no effect (no response to any startup options including PRAM, SMC, disconnecting all external items etc) and I am now at a loss as to what to do next.
    Personally I think I have two problems, one possibly a faulty graphics card and secondly corrupted Operating System software?
    Any ideas?
    Thanks
    Douglas

    Hi Peter,
    Thank you for your advice. It has taken many reboots to get it to recognise the install disk! Eventually it came up and I ran Disk Utility. It said the drive could not be repaired as Keys were out of order. I managed to install OSX on my second hard drive and I am now copying all the info I need from that drive after which I will reformat it ready for use again.
    What a nightmare! Even worse are the negative comments I have read about the Seagate Barracuda 1.5TB Drives as I have 2 installed and also a couple of Lacie External 500GB and 600GB Drives which have also had bad reviews and I did have one fail and have spent years trying to recover 20,000 photos.
    So looks like I am heading for another disaster down the line!
    Thanks for your help with this one though!
    Regards
    Douglas

  • L540: Password accepted nowhere but logon screen

    Hello!
    I have been happily using the fingerprint sensor on my L540 for a while, until a few months ago I reinstalled Windows 7 (Professional, 64x). After setting up everything and installing the Lenovo drivers, I noticed this issue:
    When I start up the laptop and type in the password, it'll accept it.* But if I open the dialogue to change it, Windows will claim that the password I type in is wrong. I tried many times, also copy-pasting in case it had changed the keyboard layout, but it just won't accept the password that works on the logon screen.
    The same thing happens when I close the laptop and it enters sleep mode, and then I try logging on again. In that case the only thing that helps is turning the laptop off completely and rebooting.
    *For a while it also wouldn't accept the password on the login screen *until* the password hint was shown. Of course maybe I just mistyped it, but it happened very consistently for 1-2 weeks or so. At some point that specific issue didn't come up anymore, without me changing anything.
    In short, I can't set up the fingerprint sensor because that requires me to type in the password, and I can't change it to something easier. This particular password wasn't meant to be typed a lot; I trusted the fingerprint sensor would work.
    I thought it might perhaps be caused by one of the drivers, since the problem started happening not immediately, but only a few days after I'd set up Windows. (My memory is a bit hazy, sorry.)
    So I threw out most of the drivers I'd downloaded manually (esp. the keyboard and fingerprint driver) and installed a package that would automatically install drivers, but that didn't change anything.
    I have no clue whether this would be a Lenovo issue or a Windows issue. Can you give me some idea where to go with this problem?
    Many thanks!
    Solved!
    Go to Solution.

    Easiest thing would be just to use the new account. But as for why that happened, I don't really know why. =/
    W520: i7-2720QM, Q2000M at 1080/688/1376, 21GB RAM, 500GB + 750GB HDD, FHD screen
    X61T: L7500, 3GB RAM, 500GB HDD, XGA screen, Ultrabase
    Y3P: 5Y70, 8GB RAM, 256GB SSD, QHD+ screen

  • Control account balance isn't less than zero

    Dear buddies:
    I wanna control  that account balance isn't less than zero when entering G/L document. I remember there is a warnning message for bank account, but I forgot how to configurate it!
    Please you help me, thanks!
       sherky

    Hello
    Not sure what customizing you refer to but you can do this control trough a validation at complete document level.
    Regards
    Javier

  • I have a 4K monitor and want to see a full screen slideshow using the jpeg generated when I "save" a raw file in the raw converter.

    I have a 4K monitor (actually a 50 inch Samsung TV).  Looking at my daily photographs on this monitor is astonishing, wonderful, etc. but there is one fly in the ointment so to speak.  With previous monitors when I selected slideshow I could get a full screen "fit or fill" slideshow that I used for grading my images.  My initial work flow all happens in Bridge and Camera Raw.  It goes like this: I download my raw files using Bridge.  In the thumbnail view I delete all the obviously bad images.  Then using Bridge I open each raw file using my preferred presets for sharping and such.  If I like the image I "Save" it to the same folder as a full sized maximum quality JPEG. 
    Now we get to the part that doesn't work.  At this point I usually start a full screen slideshow and rate each of the JPEGs I have saved.  What I see is a 1920 x 1080 preview image blown up to full screen size which of course looks awful.  Why can't I just view a slightly reduced JPEG image created on the fly by Bridge.  I guess I could tell Bridge to create 3840 x 2160 previews and they would display correctly, but that would be a big hit on disk space.
    When I run slideshow using the 1080 pixel preview, I can click on the preview I click on the displayed image and start a full resolution slideshow of the saved JPEGs but the outer edges of the image are not viewable because the image has not been reduced to fit on the monitor screen. 
    Does anyone know how I can get Bridge to show a full screen slideshow using the saved JPEGs?

    Sounds like a driver issue. I never tested in bridge, so I could be wrong. But it sounds to me that when you are connected to that screen, your settings are not set to the full resolution of that screen.

  • When setting photo as lock screen/home screen wallpaper, quality is reduced

    When setting a photo as the wallpaper for my lock screen/home screen the photo quality is dramatically reduced. This appears to be an issue since updating to iOS 8, as I have not changed my home screen wallpaper yet since updating, and when setting the same photo as my lock screen now, there is a noticeable difference. This only seems to be a problem when using landscape photo. Anyone else had this problem?

    Hi Mara,
    This is apparently a bug in iOS 7. Take a look at the posts to the right under "More Like This". Several users have come up with creative workarounds for this. Hopefully it will be fixed soon in an upcoming release!
    Cheers,
    GB

  • I have a refurbished iPhone 5 (which I got less than a year ago) and the screen becomes unresponsive and there is a purplish haze that appears on the phone when I try to use it. Hasn't been dropped or cracked.. What could it be? help!!

    I Have a refurbished iPhone 5 that is less than a year old (apple replaced my first one due to a battery fault) but this one has all of a sudden become unresponsive most times and a purple haze has come thru the background on the lCd. The cursor goes abit cranky sometimes too and jumps from Window to window?! It has never been dropped or screen has never been replaced either no exposure to water or sun. This happened after I upgraded to the new iOS 8.1. I don't think it was the update but I've never had good results from updating the iPhone anyway..
    HELP?? I have an appt with Apple tomorrow but don't know if I can wait that long!!
    THanks in advance.

    Hey jojo-10!
    Here is an article for you that can help you troubleshoot this issue with your iPhone:
    iPhone and iPod touch: Charging the battery
    http://support.apple.com/kb/HT1476
    Thanks for coming to the Apple Support Communities!
    Regards,
    Braden

  • Design Question: Can I use Rest-CsPoolRegisterState command in order start Front End Service when Quorum is lost and less than 85% of FES are available?

    Hi, 
    Assuming below setup for Enterprise edition Lync 2013
    Single Pool Stretched architecture with 4 FES servers
    Site A Data Center
    Site B Data Center
    FES
    2
    2
    SQL
    1 Primary
    1 Mirror
    Fact: In a situation when we lose network connectivity to Site A DC, and due to less than 50% FES servers, Quorum will be lost and as a result Front End Service will stop after 5 minutes. 
    The question is, would I be able to do a manual intervention by using this command
    Reset-CsPoolRegistrarState –PoolFqdn <pool name fqdn> –ResetType QuorumLossRecovery , and start FES with just 2 FES servers in Site B DC and 1 SQL
    Server?
    The reason I am asking this question is because it is mentioned in one of the Lync manuals that at least 85% of the servers must be available to recover once the Quorum has lost. The same manual also mentions to use above
    mentioned command in order to recover from Quorum Loss despite the fact that the lost FES servers are still not available.
    Thanks in Advance

    Hi,
    In Lync server 2013 Stretched pools are not supported for the Front End, Edge, Mediation, and Director server roles. It need two Lync pools.
    If one pool fail to connect, An administrator can declare an emergency and fail over the pool to the backup pool.  That is done by using the:
    Invoke-CsPoolFailover –PoolFQDN <Pool fqdn> –DisasterMode –Verbose
    More details:
    http://blog.avtex.com/2012/07/26/understanding-lync-2013-server-failover/
    Note: Microsoft is providing this information as a convenience to you. The sites are not controlled by Microsoft. Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information
    found there. Please make sure that you completely understand the risk before retrieving any suggestions from the above link.
    Best Regards,
    Eason Huang
    Eason Huang
    TechNet Community Support

Maybe you are looking for