Logon to RWB Alert Configuration

Hi,
I am trying to logon to the alert configuration and alert inbox sections of my runtime workbench. None of my users seem to work including XIRWBUSER or XISUPER. Is there a special user required for this section of the workbench?
Thanks in advance
John

Hi Santhosh,
Thanks for your quick response. I'm using the super user XISUPER who has the role SAP_XI_MONITOR. The role SAP_XI_MONITORING doesn't seem to exist.

Similar Messages

Transported Alert rule not visible in RWB - Alert Configuration

Hi ,
I have Transported Alert rule Using Below mentioned blog ..
Know How to Transport Only the Required Alert Rules !!!
I have followed the following Procedure
1. Go to Transaction SE16 Data browser.
2. Give the table name as SXMSALERTRULES and hit F7. Then Execute (F8).
3. Copy the ALERTHASHVAL field value of the entries that needs to be transported.
4. Go to transaction SE10 and Create a Workbench Request.
5. Select the Task under Workbench Request and Go to Menu Request/Task -> Change Type and select Development/Correction.
6. Double click the task and go to edit mode.
7. Enter Program ID: R3TR, Object: TABU, Objects Name: SXMSALERTRULES, press Enter and click on Functions.
8. Paste the ALERTHASHVAL field value copied in Step-3 and Save.
Now I can see the transported entries in SXMSALERTRULES table . But when I check RWB- Alert Configurations .. There is no new entry for above transported rule ...
Please tell me what is missing or where am i wrong ...

Yes, My problem is Resolved ....
Solution : -
After Transport All Alert Rules, - >
I created Manual entry for any one of the alert rule from Alert Configuration. ->
Then automatically all other transported rule came into visible state ....
So now i can see all my transported rule in Alert Config...
I dont Know , How does it happaned .. But it worked for me ... All rules got visible to me only after creating a manual entry for amy one of the alert rule ...
Hope it helps someone else ...
Guys thanks for all your comments ...
Regards
PS

Create rules in RWB - Alert Configuration is not possible.

Hi
I'm setting up alerts on a PI-server.
However, when I try to create alerts in Runtime Workbench -> Alert Configuration, I am not allowed tou2026 I.e the u201CAdd Ruleu201D-button is never possible to use. I add a description and interface names. But the buttons stays dimmed like I'm not authorized or similar.
I do have all roles, even SAP_ALL so it shall be no problem with authorization.
Do I need to setup something in NWA or similar to enable this?
/Best Regards
Joakim

It seems to be a tricky issue.
I do have have the roles:
S_ALM_ROLE
S_ALM_CONF
S_ALM_CUST
and also SAP_ALL
What I do
1) Starts RWB -> Alert config
2) Adds description and interface names for my rule.
3) Tries to select one of the available alert categories below so the AlertCategory is entered and the "Add rule"-button becomes available. (It's always grey).
I also try to do step 3 before step 2.
This is a showstopper... I'll probably create an OSS-case instead. Unless nobody shouts "Herureka, I know the solution!"
/BR
Jocke

Runtime workbeanch RWB - Alert Configuration link not working

Hi,
We are having issue opening one of the link in our SAP PI system.
The link is http://Hotname:51400/rwp -> AlertConfiguration and
Alert inbox.
All other links [Component Monitoring,Message Monitoring, Performance Monitoring .......] on this runtime workbeanch page (http://Hotname:51400/rwp) are working fine, except ALERT CONFIGURATION and ALERT INBOX.
Please suggest a solution.
Thanks
Ajay

Thanks for all your suggestions.
I have checked the FQDN hostname parameter in the exchange profile and it is as per.
Also the t-code ALRTINBOX is working fine. The inbox is getting displayed in the web browser.
Going back to the problem I have reported, when the link http://Hotname:51400/rwp -> AlertConfiguration is executed in turn this service is running the service u201Csxms_alertrulesu201D [Default_host/sap/bc/bsp/sap/sxms_alertrules/ from SICF].
I have manually checked this service from SICF - sxms_alertrules -> Test service, even this service is failing to run with error u201CInternet Explorer cannot display the webpageu201D
The link is hitting the browser with link u201Chttp://Hostname.Domain.net:8014/sap/bc/bsp/sap/sxms_alertrules?sap-client=100u201D
The service is active but still this service is failing.
Can anyone suggest solution out.
Thanks
Ajay

Unable to logon to Alert Configuration in RWB

Hi,
Someone asked this question was asked a coule of weeks ago but it was never answered.
I am trying to logon to the alert configuration and alert inbox sections of my runtime workbench. None of my users seem to work including XIRWBUSER or XISUPER. Is there a special user required for this section of the workbench?
Our XISUPER has the role of SAP_XI_MONITOR.
Thanks,
Jim

Hi Jim,
From SP 14 on PMI-free alerting was introduced. That means before SP 14 one has to configure and activate the End-to-End Monitoring, and to schedule the report SXMSALERT_PROCESS_DATA_GET in order to extract the alerts from the PMI data. For SP 14 and higher, that's not longer necessary.
If no alerts are being delivered, please check if "Suppress multiple alerts of this rule" is checked for your rule.
For SP 14 and higher you could also have a look at the report sxmsalert_logreader. This report shows some information about alerts being created or not.
You'll find more information about trouble shooting the alerting in SAP Note 913858.
Also just check if this batch program (RSALERTPROC) is running or not.
Meanwhile look at these forum threads also:
Alerts not getting triggered from Adapter Framework
Alert Configs...
Guess these links also be of some help to you.
Regards,
Abhy

Problem coming in the alert configuration

Hi frnds,
I have created alert category in abap stack , created alert rules in rwb alert configuration. And when i was testing via report rsalerttest, received the alert in alert inbox and on my outlook .
While testing through mapping sometimes I received notificationl on my id, but sometimes I am not getting alert notificationl to my id and in alert inbox.
why the same alert configuration is not triggering notification every time, and only few times triggering notification as expected.
Can you please give some light on it.
Reg,
Rajesh

Hi,
Please un check Suppress Multiple Alerts option for your alert rule.
Thanks
Hamja
Edited by: Hamja Hussain on Jul 14, 2009 2:08 PM

SAP XI Alert Configuration

Dear Gurus,
I have configured ALTRCATDER and given the name of the PI user as recepient in Fixed Receipents.
RWB-> Alert Configuration I have Created rule also.
Still I am not able to get alerts in my Alert inbox.
I just want to send internal alet to my alet inbox....
I have some Questions in my mind.
1: Is any SCOT Setting required.
2: On Running SOST ,I am getting error information as
    Send method- Via internet
    Sender - XI uid
    Reciever - XI uid
I am not sure how to test my configuratio. If I run report RSALERTTEST it gives me eroor as I have mentioned some external emai id in user profile fo PI user. No route defined to XI user id to external mail id...
Please suggest....
Regards
Deepak

Hi Deepak,
Check these links
Sending email for alerts
How to add Non XI users Email /sap ids in Scot for sending Alerts
/people/pravesh.sharma/blog/2009/07/02/configuration-for-forwarding-alerts-as-emails
/people/michal.krawczyk2/blog/2005/09/09/xi-alerts--step-by-step
/people/aravindh.prasanna/blog/2005/12/23/configuring-scenario-specific-e-mail-alerts-in-xi-ccms-part--1
Alert by email from XI to any Email
Thanks
Ray.

Alert Categor in Alert Configuration

Hi All:
I created one Alert category(ALERT_TEST) from t-code ALRTCATDEF--CCMS Alerts, I am seeing this Alert category in RWB-Alert Configuration --Select Alert Category.
I am seeing the Alert Category in Alert configuration, but when I am selecting it, its not appearing in Alert Category Text Filed(in Alert COnfiguration..below Description Text Field)
I did ALert COnfiguration many times but I never faced such Problem.
Can anyone tell me what will be the reason behind it??
Thanks & Regards,
Farooq.

Hi Pawan,
Check overthis links..
Triggering XI Alerts from a User Defined Function
The specified item was not found.
The specified item was not found. - Alert Configuration
The specified item was not found. - Trouble shoot alert config
Configuring scenario specific E-mail alerts in XI-CCMS: Part - 1 -- ccms alerts u2013 1
Configuring scenario specific E-mail alerts in XI-CCMS: Part-2 -- ccms alerts u2013 2
Configuring scenario specific E-mail alerts in XI-CCMS: Part 3 -- ccms alerts --- 3
Alerts with variables from the messages payload (XI) - UPDATED -
The specified item was not found.
http://help.sap.com/saphelp_nw04/helpdata/en/49/cbfb40f17af66fe10000000a1550b0/frameset.htm
From HelpFile
regards,
Kishore

PI Alert configuration rule definition

Hello,
On my PI production system I want to cretae a rule base on the adapter type (RWB - Alert configuration),
unfortunately i can olly choose between * and MessagingSystem. On my test and dev systems I have all the adapters in the "combo box" : *, AS2, CIDX, RFC, OFT_X31, SOAP ....
Does someone Know what I have to do to see all the adapters type ?
Thank you
Fabrice

Do you have any other interfaces running in production?
if this is the first then i guess Post installation steps might have some problem like registration of Adapter Engine in SLD...
Check with basis...
HTH
Rajesh

PI7.0: Problem about openning alert configuration in RWB

Hi experts,
 I encounter a problem about alert configuration.
 I have defined the alert catogory in WAS ABAP and use the report RSALERTTEST to test it. It's OK. Then I logon RWB and click u201CAlert configurationu201D,system popup a login window. I input my user account and confirm it. But the logon window popup again and again.I don't kown how to resolve it. BTW, my user account has the roles SAP_ALM_ADMINISTRATOR and SAP_ALM_CUSTOMIZER.And I have resolved the problem "Alert configuration does not start" according to note 750287.
 Anyone has idea??Could you please give me some advice???
Thanks a lot in advance.
BR Villy.L

Hi Villy,
Although i have not faced this issue but one workaround fix that can help you to address your problem would be....
Please add below 'actions' to 'everyone' role using NWA->Identity Management
UME keystore-view.TicketKeystore entry-actions.all.all
UME keystore-view.TicketKeystore property-actions.all.all
UME keystore-view.TicketKeystore view-actions.all.all
Then, Initiate RWB using URL - http://<j2ee-host>:<http-port>/rwb/rtc?op=init
I hope this fixes your issue.
Regards
Sekhar

Error while opening Alert Configuration in RWB

Hi Everyone,
When I selcet Either Alert Inbox or Alert Configuration in Runtime Work Bench, I am getting error as
404 Not Found
The requested resource does not exist.
Do we need to configure/Deploy anything to access Alert Configuration.
Regards,
Varun

Varun,
Perform following steps. , if not performed earlier :
1.Go to exchange profile
http://<IP>:<Port>/exchangeProfile/index.html
Then RuntimeWorkbench -> com.sap.aii.rwb.server.centralmonitoring.r3.ashost = " Mention FQDN here "
->com.sap.aii.rwb.server.centralmonitoring..httpport = 8000
2. Reinitialize the RWB service by : http://xiserver:50000/rwb/rtc?op=init
3. RZ10 - Make an entry for /icm/host_name_full
*************************************************8
You should give fully qualified host name for the xi server (parameter, icm/host_name_full). Also set the same in exchange profile parameter com.sap.aii.rwb.server.centralmonitoring.r3.ashost.
- Creating HTTP Destination pmistore in the Java Environment
from XI installation guide (config in visual admin)
- Check if services in transaction SICF for RWB - if they are activated
- on your XI box go to TCODE - SE38 and run program - RSXMB_ACTIVATE_ICF_SERVICES.
- check SAP note: 750287 (XI 3.0 Runtime Workbench: Alert configuration does not start) and change values in your ExchangeProfile.
- check if you can accept cookies.
It should work friend....!!!!
Regards,

Problem acccessing alertinbox or alert-configuration in RWB

Hi forum,
I have a problem acccessing alertinbox or alert-configuration in RWB,
because, whenever i click the button "alertinbox" or "alert-configuration"
it gives an BSP error page:
Business Server Page (BSP) error
Calling the BSP page was terminated due to an error.
The following error text was processed in the system:
BSP Exception: the Application Name sap in URL /sap/bc/bsp/sap/alertinbox/index.htm?sap-client=400&sap-sessioncmd=open is invalid.
pls help,

Hi,
Once you restart your Java engine.
The way of doing this is go to transaction SMICM-->Administration>J2EE Instance (Local) -> Send Soft Shitdown--
> With Restart.
Reward with points if helpful
Regards
Sai Ganesh

Cannot login into Alert Configuration (RWB)

I have tryed to use xisuper, j2ee_admin accounts and I am always getting error.
Logon failed
What has happened?
Call of URL http://xiserver:8000/sap/bc/bsp/sap/alertinbox/index.htm terminated due to error in logon data.
Which user could login into Alert Configuration?

Unfortunatelly it is no so simple in my case. I added requred roles to user. Alert Configuration works but Alert Inbox don't. I got an error
ST22
In program "CL_O21EULYK95VREU9OVYHQ18I30S6CP" the following sysntax error occured:
"The type "LTTY_ACTIVITIES" is unknown"
Program CL_BSP_CONTEXT==============CP
Include CL_BSP_CONTEXT==============CM009
Row 66
Module Name GET_PAGE_CONTEXT_CURRENT

Alert configuration Not working in RWB

Hi,
In RWB alertconfiguration is not working, showing the error
404 Not Found". I gone through this thread
Alert configuration or Alert Inbox-----404 Not Found
And my host name is full host name.
In exchange profiles my port is 50100 (J2EE PORT) (Not Changed)
1. In SMICM when I changed to port to 50100 (J2EE) then alert configuration
working, But My scenarios not working throwing error : System Error.
Error Category XI_J2EE_MESSAGING_SYSTEM
Error Code HTTP_TRANSMISSION_ERROR
2. In SMICM when I changed to port to 8001 (ABAP Port) then Alert configuration not working (Error : 404 Not Found), but my scenarios were working fine.
what would be the reason?
thx in advance,
Ansar.

HI,
If Error: 404 Not Found
Description: The server has not found anything matching the Request-URI. No indication is given of whether the condition is temporary or permanent. The 410 (Gone) status code SHOULD be used if the server knows, through some internally configurable mechanism, that an old resource is permanently unavailable and has no forwarding address. This status code is commonly used when the server does not wish to reveal exactly why the request has been refused, or when no other response is applicable.
Possible Tips:- for HTTP_RESP_STATUS_CODE_NOT_OK 404
404 is an HTTP response code that indicates that the resource in question couldn't be found. Usually this is due to an incorrect URL, so it is better to cross check all URLs.
Check pipeline URL in the SLD in the business system of the Integration Server For this go to SLD->Business System-><yourIntegrtaion Server>->Pipeline URL: It should be like this http://<host>:<port>/sap/xi/engine?type=entry Where host is the host name of the Integration Server and port is the HTTP(8xxx) port. To verify this in Integration Server you can do like this. Go to SXMB_ADM->Integration Engine Configuration->Choose Edit from Menu -> Change Global Configuration Data to switch to change mode. Then select System Landscape - Load Configuration. (This is not required always)
Check that the port really is the ICM HTTP Port and not the J2EE port i.e SMICM then menu GOTO --> SERVICES and check the port number for HTTP. It should be HTTP port
If the error is Page cannot be displayed, cannot find server in https configurations Check and correct the SSL configuration for the ABAP and the J2EE side of the system
If the error is because of integration server when using Proxy communications then check these. i.e SXMB_ADM->Integration Engine Configuration->Corresponding Integration Server enrty should be dest://<Http Integration server-Destination> Where < Http Integration server -Destination > is the RFC destination (SM59) of type HTTP connection (type H) to the Integration Server. In this case, host name, port, and path prefix are saved in the RFC destination
Also see the below links
/people/michal.krawczyk2/blog/2005/09/09/xi-alerts--troubleshooting-guide
http://help.sap.com/saphelp_nw04/helpdata/en/3f/81023cfa699508e10000000a11402f/content.htm
Regards
Chilla

Problem with CCMS PI7.1 alert configuration for RWB Alert count

Hi,
We have configured CCMS alert for PI7.1 RWB failure count. Alert is getting triggered only one time and after that no alerts. I can see the change in data but alert is not getting triggered. If I complete the alert then immediately in next run a new alert is generated with last reported data and then again there will be no alert going forward. Data is collected but no alert is triggered. Does anyone know the reason for this and how to fix it? Please help.
Thanks,
Kavitha Rajan.

Hi Jayan,
Our PI alert configuration is fine. And also we did not choose multiple suppress method. Problem is with Solution Manager CCMS PI alert configuration for failed RWB count. After initil alert and then nomore alerts are triggered. If I complete the alert then again only first alert is triggered and again no alerts going forward. Please advice.
Thanks,
Kavitha Rajan.

Logon to RWB Alert Configuration

Similar Messages

Maybe you are looking for