Logon to SAP system failed

my system logon failed .
i am not able to logon to my ides system. server is starting but while logging into the system by using user name and passward
the following error is coming
user account not in validity date
some other information is also available
logon to SAP system failed
the system description "NEW" cannot be found in the system list.
Make sure that saplogon.ini exists and choose an existing system description in the system list.
Regards

Check with your Basis. Your account validity is expired. Ask them to increase the validity.
The INI also does not exist on your system. Take the file from Basis and paste it on your PC.
Arti

Similar Messages

SAP system not starting or not able to logon to SAP system

Hi All,
Our OS is AIX5.3
DB is Oracle 10.2
And the machine is in cluster for HA. Cluster is running fine.
I am starting SAP using startsap all, the command shows that database and all instances have been started successfully. But we are not able to logon to the system.
Following is the output of startsap command and dpmon command :
bash-3.00$ startsap all
Checking ARP Database
ABAP Database is not available via R3trans
Starting SAP-Collector Daemon
14:45:38 11.10.2008   LOG: Effective User Id is root
This is Saposcol Version COLL 20.95 700 - AIX v11.15 5L-64 bit 080317
Usage: saposcol -l: Start OS Collector
        saposcol -k: Stop OS Collector
        saposcol -d: OS Collector Dialog Mode
        saposcol -s: OS Collector Status
The OS Collector (PID 286752) is already running .....
saposcol already running
Running /usr/sap/ARP/SYS/exe/run/startdb
Trying to start ARP database ...
Log file: /home/arpadm/startdb.log
ARP database started
/usr/sap/ARP/SYS/exe/run/startdb completed successfully
Starting SAP Instance ASCS00
Startup-Log is written to /home/arpadm/startsap_ASCS00.log
Instance Service on host sapprodail started
Instance on host sapprodail started
Starting SAP Instance DVEBMGS01
Startup-Log is written to /home/arpadm/startsap_DVEBMGS01.log
Instance Service on host sapprodail started
Instance on host sapprodail started
bash-3.00$
bash-3.00$ dpmon
dpmon=>sapparam(1c): No Profile used.
dpmon=>sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
DpMonInit failed - possibly no dispatcher running
DpMon: External/Internal dplib version: 110/237
bash-3.00$
Developer trace out put is as follows
trc file: "dev_disp.new", trc level: 1, release: "700"
sysno      01
sid        ARP
systemid   324 (IBM RS/6000 with AIX)
relno      7000
patchlevel 0
patchno    159
intno      20050900
make:      single threaded, Unicode, 64 bit, optimized
pid        295220
Sat Oct 11 14:46:22 2008
kernel runs with dp version 237000(ext=110000) (@(#) DPLIB-INT-VERSION-237000-UC)
length of sys_adm_ext is 576 bytes
SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (01 295220) [dpxxdisp.c   1254]
        shared lib "dw_xml.so" version 159 successfully loaded
        shared lib "dw_xtc.so" version 159 successfully loaded
        shared lib "dw_stl.so" version 159 successfully loaded
        shared lib "dw_gui.so" version 159 successfully loaded
        shared lib "dw_mdm.so" version 159 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3900
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: start server >sapprodail_ARP_01                       <
DpShMCreate: sizeof(wp_adm)             19200   (1600)
DpShMCreate: sizeof(tm_adm)             5941560 (29560)
DpShMCreate: sizeof(wp_ca_adm)          24000   (80)
DpShMCreate: sizeof(appc_ca_adm)        8000    (80)
DpCommTableSize: max/headSize/ftSize/tableSize=500/8/548056/548064
DpShMCreate: sizeof(comm_adm)           548064 (1088)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm)          0       (104)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm)           0       (72)
DpShMCreate: sizeof(vmc_adm)            0       (1864)
DpShMCreate: sizeof(wall_adm)           (40056/36728/64/192)
DpShMCreate: sizeof(gw_adm)     48
DpShMCreate: SHM_DP_ADM_KEY             (addr: 0x700000000126000, size: 6626392)
DpShMCreate: allocated sys_adm at 0x700000000126000
DpShMCreate: allocated wp_adm at 0x7000000001280f8
DpShMCreate: allocated tm_adm_list at 0x70000000012cbf8
DpShMCreate: allocated tm_adm at 0x70000000012cc58
DpShMCreate: allocated wp_ca_adm at 0x7000000006d7590
DpShMCreate: allocated appc_ca_adm at 0x7000000006dd350
DpShMCreate: allocated comm_adm at 0x7000000006df290
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 0x700000000764f70
DpShMCreate: allocated gw_adm at 0x700000000764ff0
dev_disp (58%)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm)           0       (72)
DpShMCreate: sizeof(vmc_adm)            0       (1864)
DpShMCreate: sizeof(wall_adm)           (40056/36728/64/192)
DpShMCreate: sizeof(gw_adm)     48
DpShMCreate: SHM_DP_ADM_KEY             (addr: 0x700000000126000, size: 6626392)
DpShMCreate: allocated sys_adm at 0x700000000126000
DpShMCreate: allocated wp_adm at 0x7000000001280f8
DpShMCreate: allocated tm_adm_list at 0x70000000012cbf8
DpShMCreate: allocated tm_adm at 0x70000000012cc58
DpShMCreate: allocated wp_ca_adm at 0x7000000006d7590
DpShMCreate: allocated appc_ca_adm at 0x7000000006dd350
DpShMCreate: allocated comm_adm at 0x7000000006df290
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 0x700000000764f70
DpShMCreate: allocated gw_adm at 0x700000000764ff0
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 0x700000000765020
DpShMCreate: allocated wall_adm at 0x700000000765028
MBUF state OFF
DpCommInitTable: init table for 500 entries
rdisp/queue_size_check_value : -> off
ThTaskStatus: rdisp/reset_online_during_debug 0
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 4096 kByte.
Using implementation std
<ES> Info: use normal pages (no huge table support available)
EsStdUnamFileMapInit: ES base = 0x0x700000030000000
EsStdInit: Extended Memory 4092 MB allocated
<ES> 1022 blocks reserved for free list.
ES initialized.
WLM Tag 'ARP/DSP' successfully set for this process
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG CPS=> DpLoopInit, ICU ( 3.0 3.0 4.0.1) [dpxxdisp.c   1656]
***LOG Q0K=> DpMsAttach, mscon ( sapprodail) [dpxxdisp.c   11937]
DpStartStopMsg: send start message (myname is >sapprodail_ARP_01                       <)
DpStartStopMsg: start msg sent to message server o.k.
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
CCMS: Initalizing shared memory of size 60000000 for monitoring segment.
CCMS: Checking Downtime Configuration of Monitoring Segment.
CCMS: start to initalize 3.X shared alert area (first segment).
DpMsgAdmin: Set release to 7000, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c   1050]
DpMsgAdmin: Set patchno for this platform to 159
Release check o.K.
Sat Oct 11 14:46:32 2008
MBUF state ACTIVE
DpModState: change server state from STARTING to ACTIVE
Please help me step by step to solve this problem.
Regards
Edited by: Infoseek Sap123 on Oct 12, 2008 8:22 AM

The command is
dpmon pf=/usr/sap/SID/SYS/profile/<profile>
Regards

HTTP/S connection to the SAP System failed

Dear SDN,
I am trying to connect my EP System (Enterprise Portal 6.0 SP 15) to MMSCMDEV System(SCM 4.0 Development System).
Please note SCM 4.0 has external ITS on server MMLCADEV (both are in same network). EP is in different domain.
User Mapping has been done while making the system connection.
1. Ttransaction service test is successful to MMSCMDEV from EP (System Administration->Support->Support Desk->SAP Application->Test and Configuration Tools->Transaction with parameters "service - transaction; tcode - /sapapo/ac04; SAP GUI Type - SAP GUI for Windows").
2. While uploading transaction using Role Upload, I m not able to view any transaction and get the error as : System connection failed.
3. System Connection Tests to ITS & WAS fails with error: HTTP/S connection test failed.
The SAPGUI HTML is available thru ITS.
Please help me resolve issue.

Well I just tried to create the SAP Transaction Iview, putting the tcode I need.
I am able to see them properly , both in Wingui as well as webgui.
I used a test role and attached it to my user Id and another test id (this exists in both systems and user mapping is done for it.)
I am able to see the iviews working from my Id , but in the test id : it gives an error as : Portal Runtime Error
An exception occurred while processing a request for :
iView : N/A
Component Name : N/A
Unable to lookup System 'MMSCMTST'. Please check the system object and the alias..
See the details for the exception ID in the log file
and : com.sap.portal.appintegrator.sap.Transaction::Transaction/WebGuiSSOLayer
Can somebody tell me why this should have happened ?
Regards,
Chandani

SAP connect fails

Hello,
I have difficulties connecting to SAP via RFC. I get Error Messages API4006 and API3011. Does anyone have any idea what this means? I did not find a list of error messages with description.
Florian Fuchs

The API3011 error indicates that the connection
to the sap system fails. The typical causes of
this error are:
1. librfc32.dll needs to be placed in the directory:
$OWB_HOME\owb\bin\admin
2. the librfc32.dll on your machine is not compatible
with owb client. Right click on the librfc32.dll,
check the property: version, build, date etc.
BTW, which version of OWB are you using?

Allow Multiple logons in SAP

Hi,
I need to allow a particular user to allow multiple logons to sap system.
can anyone help me, how to proceed about this.
Thanks,
Sailesh K

Hi Sailesh,
If you only want particular users to be able to logon multiple times use parameter login/multi_login_users and the value will be the usernames separate by a comma
For more see,
http://help.sap.com/saphelp_nw04s/helpdata/en/22/41c43ac23cef2fe10000000a114084/content.htm
Hope this help!
Juan
Please reward with points if helpful

[Crystal Reports 2008] - Logon failed in SAP system

Hi everybody,
I have installed on my notebook Crystal Reports 2008 trial version and the Integration Kit for SAP Solutions that I found on this web page: https://boc.sdn.sap.com/node/18962
When I try to open a SAP Data Source, Crystal Reports finds the connections I have in my SAPLogon and ask me credential infos. I get the following credential error:
"You do not have the necessary rights to design reports against the SAP System"
The user I enter has full administration right on the system, which is a SAP R/3 Enterprise.
Thanks,
Valerio

Hello Valerio,
Please make sure you install the corresponding transports for the Driver you are trying to use in Crystal Reports.
The transports are available on the SAP Integration Solution CD.
thanks
Mike

RFC logon failed with message: Failed: Connect to SAP gateway failed

I installed CI instance fine and i am stopped here with this error at the end of DB instance install. Could someone let me know what could be the reason for this. Is there any fix or workaround to continue the install.
INFO       2006-09-16 01:13:02 [iaxxrfcimp.cpp:398]
          CAbRfcImpl::setRfcConnectParam
RFC parameter ASHOST set to value hostSAP.
INFO       2006-09-16 01:13:02 [iaxxrfcimp.cpp:398]
          CAbRfcImpl::setRfcConnectParam
RFC parameter SYSNR set to value 09.
INFO       2006-09-16 01:13:02 [iaxxrfcimp.cpp:543]
          CAbRfcImpl::checkConnectInfo
RFC connection information checked successfully.
ERROR      2006-09-16 01:13:02 [iaxxrfcimp.cpp:450]
          CAbRfcImpl::openRfcConn
FRF-00007 Unable to open RFC connection.
ERROR      2006-09-16 01:13:02
          CJSlibModule::writeError_impl()
FRF-00063 RFC logon failed with message: Failed: Connect to SAP gateway failed
Connect_PM GWHOST=hostSAP, GWSERV=sapgw09, ASHOST=hostSAP, SYSNR=09
LOCATION    CPIC (TCP/IP) on local host
ERROR       partner not reached (host hostSAP, service 3309)
TIME        Sat Sep 16 01:13:02 2006
RELEASE     640
COMPONENT   NI (network interface)
VERSION     37
RC          -10
MODULE      nixxi_r_mt.cpp
LINE        8528
DETAIL      NiPConnect
SYSTEM CALL connect
ERRNO       146
ERRNO TEXT Connection refused
COUNTER     4
Thanks,
Ram

at the end of the database instance installation SAPInst is doing some RFCs to the CI.
The logfile states that the gateway on host hostSAP with the systemnumber 09 is not reachable.
Please check if you have started the central instance on this machine.
peter

Unable to Logon to the SAP System after Installing SAPNW2004sSneakPreviewAB

Hi
   I Installed SAPNW2004sSneakPreviewABAP.
   If i am trying to run the NSP Server it first Starting (Showing Blue Color ) and after few seconds it is becoming Yellow in Color. When i cross checked in Process list it is showing one of the process in yellow color i.e.
disp+work.EXE whose description is Dispatcher
and Status is showing as "Running but Dialog Queue standstill"
May be because of this i am unable to log on the SAP System.
One more thing i got a licence key from SAP but when i am trying to intall licence key using saplicence -install this is also not working it is showing following error message.
SAPLICENSE (Release 700) ERROR ***
    ERROR:   Can not set DbSl trace function
    DETAILS: DbSlControl(DBSL_CMD_IMP_FUNS_SET) failed with return code 20
    RC-INFO: error loading dynamic db-library - check environment for:
             dbms_type = <db-type> (e.g. ora)
             DIR_LIBRARY = <path to db-dll> (e.g. /usr/sap/SID/SYS/exe/run)
Could you please help in this

Please refer to this post as this is a duplicate.
Problem after installing SAPNW2004sSneakPreviewABAP
Please close this post. Thanks.
Regards,
Rich Heilman

How to implement SSO to non-SAP systems using SAP logon ticket?

Hello,
We would like to implement Single Sign On between our SAP Netweaver system and a Siebel which is a non-SAP system using SAP logon tickets.
Can anyone please give me some leads on this, in particular:
1. Is there a JAVA API or an SAP plug-in that can be implemented on the Siebel machine to extract the SAP logon ticket?
2. As the other machine might seat on a complete different domain, is it possible to implement SAP logon ticket without using cookies (perhaps through the HTTP header?
3. In case you think using SAP logon tickets is not the best solution here I would be happy to hear any other suggestions you might have.
Roy

Hi,
I'm currently using SAML as well. Unfortunately the SAP J2EE cannot work as authority (identity provider) but what you can do is using an open implementation of SAML such as opensso which is an open version of SUNs Java System access manager.
There are a couple of other projects such as opensaml, apache's wss4j or shibboleth that might be interesting in this context.
I just installed opensso and got it working with SAP J2EE 7.0 using SAPs JAAS SAMLLoginModule to authenticate users within SAP J2EE.
In this scenario opensso serves as identity provider just as you need! There are a couple of Policy agents available on SUNs Download site you can use with Apache, Tomcat, JBOSS, WebSphere, Bea Web Logic etc. in order to authenticate! Otherwise you just directly authenticate against opensso. When installing opensso you can configure the type of user store you want to use! By default it uses LDAP but you can also use different types of user store using JDBC or other mechanisms. Since you have a Directory Service you could easily connect it to your existing directory.
There is also a way to map user ids directly in opensso by adding a uid mapping class. I created some documentation with lots of screenshots about using opensso with SAP J2EE. You can easily use opensso with any other system that supports SAML. In the case of SAP the usage is currently limited to SAML versions 1.0 and 1.1. Version 2.0 is not yet supported but should be in one of the following versions.
Here are some links you might want to check:
OpenSAML: https://spaces.internet2.edu/display/OpenSAML/Home
wss4j: http://ws.apache.org/wss4j/
shibboleth: http://shibboleth.internet2.edu/
opensso: https://opensso.dev.java.net/
On SDN you will find a documentation on how to connect SUN Java System Access Manager to SAP J2EE (see https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/906d9fc6-31b9-2910-1385-90edad7d7570). As I said opensso is based on the SUN Access Manager code and looks quite the same. So you can adapt this documentation in order to configure opensso or you can just ask me for the documentation.
Hope this is helpful...
Let me know if you need further assistance on this topic
Cheers

Call to messaging system failed: com.sap.aii.af.ra.ms.api.DeliveryException

hello
I am running an interface RFC2WS sync and recieve this message in the RFC. the message does not get out of the XI and rich the target (WS).
the XI been upgraded lately, and I think this might be the cuase to the problem, becuase the interface been worked before, and still working in PROD environment as is.
what could be the problem and how can I start investigate it to find the problem?
this is what the SAP recieves
call to messaging system failed: com.sap.aii.af.ra.ms.api.DeliveryException
Thanks
Kfir

Hi Kfir,
just check in RWB, in component monitoring, the status of integration server and adapter engine.......if it is red, then ask your basis guys to remove that error................just check your comm channels, i think your comm channels are in error, if they are just edit them, save and activate them again..........i think then your this issue will be resolved.'
Regards,
Rajeev Gupta

"call to messaging system failed: com.sap.aii.af.ra.ms.api.DeliveryExceptio

Hello XI guru,
I am configuring RFC to File scneario where i am using BAPI as Source. When i run this BAPI in se37 it gives me short dump stating "call to messaging system failed: com.sap.aii.af.ra.ms.api.DeliveryException:
Please help.
Also I want to know is it necessary to write wrapper for BAPI before configuring. This bapi list all orders created in SCM system.
awaiting ur advises and help
Thanx
Anu

Hello guys,
I am sorry but kind of confuse, please be with me.
I have RFC with following structure:
'Z_BAPI_MOSRVAPS_GETLIST2'
importing parameters
      LOGICAL_SYSTEM = T_LOGICAL_SYSTEM
      START_TIME = T_START_TIME
TABLES
      PRODUCT_SELECTION = T_PRODUCT_SELECTION
      LOCATION_SELECTION = T_LOCATION_SELECTION
      LOCTYPE_SELECTION = T_LOCTYPE_SELECTION
      ORDER_HEADS = T_ORDER_HEADS
      OUTPUT_NODES = T_OUTPUT_NODES.
I put values in logical system/start_time/
product_selection/location_selection/loctype_selection
based on these values order_heads and output_nodes is populated. I want value of these to tables to be sent as file.
Data structure for file is as follows
<?xml version="1.0" encoding="UTF-8" ?>
- <ns0:ORDER_MT xmlns:ns0="uri:scm:sql:transaction">
- <ORDER_HEADS>
- <ITEM>
<ORDER_NUMBER />
<ORDER_TYPE />
</ITEM>
</ORDER_HEADS>
- <OUTPUT_NODES>
- <ITEM>
<MASTER_PRODUCT />
<MASTER_PLANT />
</ITEM>
</OUTPUT_NODES>
</ns0:ORDER_MT>
But the payload has value
<?xml version="1.0" encoding="UTF-8" ?>
- <ns0:ORDER_MT xmlns:ns0="uri:scm:sql:transaction">
remaining is not seen in sxmb_moni and payload cannot be read error is given.
file structure is dummy structure, please tell me know if it is right or i need to change.
Thanx
Anu

COM+ Event System failed to fire the StartShell and Logon method after installation of PM 1.43

Hi Guys,
After installation of Power Manager 1.43, the following errors were immediate shown at event viewer: COM+ Event System failed to fire the StartShell and Logon method on subscription {F6FE5592-FCBC-44AD-A836-D37F5085ED5B}-{00000000-0000-0000-0000-000000000000}-{00000000-0000-0000-0000-000000000000}. The subscriber returned HRESULT 80004001.
Please advice if this is a known issue? Thanks!

Hello,
this is a known problem. See this thread
Follow @LenovoForums on Twitter! Try the forum search, before first posting: Forum Search Option
Please insert your type, model (not S/N) number and used OS in your posts.
I´m a volunteer here using New X1 Carbon, ThinkPad Yoga, Yoga 11s, Yoga 13, T430s,T510, X220t, IdeaCentre B540.
TIP: If your computer runs satisfactorily now, it may not be necessary to update the system.
English Community Deutsche Community Comunidad en Español

SAP System Logon selection shows up blank in Crystal Reports

Hi there,
I've done the following so many times, in the following order, without running into any issues:
1. Install SAP Front End
2. Install Business Objects Enterprise 3.1
3. Install Business Objects Explorer 3.1 SP1 (Polestar 3.1)
4. Install Crystal Reports 2008 SP1
5. Crystal Reports Viewer 2008
6. Install Xcelsius Enterprise 2008 SP2
7. Install Live Office 3.1
8. Install SAP Integration Kit 3.1 (Custom-->Complete installation)
However, this time around I've run into an issue which I'm trying to resolve, but it has been a nightmare. When I try to access "SAP Table, Cluster, or Function" from File menu>New>Standard Report>Create New Connection>SAP Table, Cluster, or Function, I see the "Available SAP Systems" section blank on the "SAP System Logon" dialog box.
However, this dialog box shows all the connections strings when I access it via the SAP menu or toolbar in Crystal Reports.
To fix this issue I've uninstalled SAP IK, CR Viewer and Crystal Report and reinstalled it, but the problem persists. I am wondering if you have ever come across this before and if you could please give me some tips to resolve this.
Thanks a lot,
Gaurav

Hi
please do the following:
1. Define an environment variable (user or system) with the name SAPLOGON_INI_FILE . This variable should contain the path to your saplogon.ini file including the file name eg. if the saplogon.ini resides in the folder c:\windows the variable should contain the following value c:\windows\saplogon.ini
2. Open your saplogon.ini file using Notepad and go to File->Save as. Choose All Files in the field Save as type and DO NOT change the name of the file. In the field Encoding make sure that UTF-8 is selected.
Regards,
Stratos

How to see the log that the account logons sap system?

hi, all
I want to know that how many times does the account(eg,sapuser) log on sap system in one month.
and, when did log on in every time?
thanks and Regards.

To Deepak Agrawal:
    thanks very much for your answer.
    SM04 will show current users who are logged into system   , i know it.
    but now i don't want to get the current logon information.
    I want to get the logon information of the account(eg.sap*) at yesterday , or at the day before yesterday. ............
Thanks and regards

Inbound idoc failing to reach SAP system.

Hi All,
We are upgrading our SAP system from release 700 to 730. Post upgrade we have identified that idocs which are supposed to reach SAP as inbound are failing in Biz Talk with below message.
Error details: Microsoft.ServiceModel.Channels.Common.XmlReaderParsingException: The segment name is not valid for the IDOCTYP, Release, or CIMTYP. Segment name: E2EDT37003GRP IDOCTYP: SHPMNT03 Release: 700 CIMTYP: . Ensure that your message xml validates against the operation schema.
This happening for only one inbound idoc which is using SHPMNT03 idoc.Whereas other inbound idoc which is using /AFS/ORDERS05 idoc is reaching SAP without any issues. I am bit confused why this is happening for idoc SHPMNT03.
Please let me know your thoughts.
Thanks,
Gowrinath.

Hi Ramya,
Thanks for your response.
In Biz Talk schema is designed for 700 release idoc.Whereas our system is upgraded to 731 release.
Hotfix is for Biz Talk. Can't we implement any solution in SAP side.
Thanks,
Gowrinath.

Logon to SAP system failed

Similar Messages

Maybe you are looking for