Logos in Module Pool
Hi,
How to upload Our own logo to Module Pool.
In Module Pool we use ABTREE table .
How to upload custom logos to ABTREE
Hi,
First you need to upload using OAER or OAOR.
you need to have containers, and you need to use classes.
data: DG_DYNDOC_ID TYPE REF TO CL_DD_DOCUMENT.
using this method you can set background picture.
CALL METHOD DG_DYNDOC_ID->SET_DOCUMENT_BACKGROUND
EXPORTING
PICTURE_ID = DL_BACKGROUND_ID.
Here is the sample code
Create a screen
Place a custom container for the picture on the screen.
Name the container GO_PICTURE_CONTAINER.
Type pool for using SAP icons
TYPE-POOLS: icon.
Declarations
DATA:
go_picture TYPE REF TO cl_gui_picture,
go_picture_container TYPE REF TO cl_gui_custom_container.
MODULE status_0100 OUTPUT.
IF go_picture_container IS INITIAL.
Create obejcts for picture and container and
setup picture control
CREATE OBJECT go_picture_container
EXPORTING
container_name = 'PICTURE_CONTAINER'.
CREATE OBJECT go_picture
EXPORTING
parent = go_picture_container.
Set display mode (Stretching, original size etc.)
CALL METHOD go_picture->set_display_mode
EXPORTING
DISPLAY_MODE = CL_GUI_PICTURE=>display_mode_fit_center
EXCEPTIONS = 1.
Load picture from SAP Icons. To oad a picture from an URL use method
load_picture_from_url
CALL METHOD go_picture->load_picture_from_sap_icons
EXPORTING
icon = icon_delete
EXCEPTIONS error = 1.
ENDIF.
ENDMODULE. [/code]
check the below link.
http://www.sapgenie.com/abap/controls/picture.htm
Award points if helpful.
Regards,
Raj.
Similar Messages
-
How to display logo in module pool screen
Hi,
I need to display a logo in the screen of module pool programming. I have already imported the logo image using transaction OAER.
Please suggest how to display the image in the screen..
Thanks and Regards,
Sayan GhoshYou can show the image using the calss
CL_DD_DOCUMENT
For reference how to use the class
check the example program
DD_ADD_PICTURE -
How to add logo in module pool screen
Hi Expert,
I need to display company logo in the module pool screen
how this can be added ?
Regards
BikasHi,
create a custom control called 'CUSTOM_CONTROL'
CONSTANTS: CNTL_TRUE TYPE I VALUE 1,
CNTL_FALSE type i value 0.
data:h_picture type ref to cl_gui_picture,
h_pic_container type ref to cl_gui_custom_container.
data: graphic_url(255),
graphic_refresh(1),
g_result like cntl_true.
data: begin of graphic_table occurs 0,
line(255) type x,
end of graphic_table.
data: graphic_size type i.
data: g_stxbmaps type STXBITMAPS,
l_bytecnt type i,
l_content TYPE standard table of bapiconten initial size 0.
g_stxbmaps-tdobject = 'GRAPHICS'.
g_stxbmaps-tdname = 'ENJOY'.
g_stxbmaps-tdid = 'BMAP'.
g_stxbmaps-tdbtype = 'BMON'.
call function 'SAPSCRIPT_GET_GRAPHIC_BDS'
exporting
i_object = g_stxbmaps-tdobject
i_name = g_stxbmaps-tdname
i_id = g_stxbmaps-tdid
i_btype = g_stxbmaps-tdbtype
importing
e_bytecount = l_bytecnt
tables
content = l_content
exceptions
not_found = 1
bds_get_failed = 2
bds_no_content = 3
others = 4.
call function 'SAPSCRIPT_CONVERT_BITMAP'
exporting
old_format = 'BDS'
new_format = 'BMP'
bitmap_file_bytecount_in = l_bytecnt
importing
bitmap_file_bytecount = graphic_size
tables
bds_bitmap_file = l_content
bitmap_file = graphic_table
exceptions
others = 1.
call function 'DP_CREATE_URL'
exporting
type = 'image'
subtype = cndp_sap_tab_unknown
size = graphic_size
lifetime = cndp_lifetime_transaction
tables
data = graphic_table
changing
url = graphic_url
exceptions
others = 4 .
create object h_pic_container
exporting container_name = 'CUSTOM_CONTROL'.
create object h_picture exporting parent = h_pic_container.
call method h_picture->set_display_mode
exporting
display_mode = cl_gui_picture=>display_mode_normal.
call method h_picture->load_picture_from_url
exporting url = graphic_url
importing result = g_result.
or you can check the program RSDEMO_CUSTOM_CONTROL
check link :
How to insert Image on Screen
thanks
Parvathi -
How to insert Logo in module pool programming
Plz any one can explain me that how we will inseart Logo on screens by using module pool programming (in GUI programming) .
Hello.
I'll give you an example of inserting a personal photo in UI programming. Hope it helps you.
First of all, in your screen (painter), insert a custom control and give it a name (PHOTO in my example).
Then, in your screen PBO, insert a coding like this:
CLEAR handle.
CALL FUNCTION 'HR_IMAGE_INIT'
EXPORTING
p_pernr = pernr
p_tclas = 'A'
container = 'PHOTO'
IMPORTING
handle = handle
EXCEPTIONS
no_document = 1
internal_error = 2
OTHERS = 3.
CALL FUNCTION 'HR_IMAGE_SHOW'
EXPORTING
p_pernr = pernr
p_tclas = 'A'
handle = handle
EXCEPTIONS
invalid_handle = 1
no_document = 2
internal_error = 3
OTHERS = 4.
Regards.
Valter Oliveira. -
How to upload logos in module pool programs?
hi frnds,
My requirement is to upload the logo in the module pool screen.Can any one explain in detail? its urgent.Hi,
First you need to upload using OAER or OAOR.
you need to have containers, and you need to use classes.
data: DG_DYNDOC_ID TYPE REF TO CL_DD_DOCUMENT.
using this method you can set background picture.
CALL METHOD DG_DYNDOC_ID->SET_DOCUMENT_BACKGROUND
EXPORTING
PICTURE_ID = DL_BACKGROUND_ID.
Here is the sample code
Create a screen
Place a custom container for the picture on the screen.
Name the container GO_PICTURE_CONTAINER.
Type pool for using SAP icons
TYPE-POOLS: icon.
Declarations
DATA:
go_picture TYPE REF TO cl_gui_picture,
go_picture_container TYPE REF TO cl_gui_custom_container.
MODULE status_0100 OUTPUT.
IF go_picture_container IS INITIAL.
Create obejcts for picture and container and
setup picture control
CREATE OBJECT go_picture_container
EXPORTING
container_name = 'PICTURE_CONTAINER'.
CREATE OBJECT go_picture
EXPORTING
parent = go_picture_container.
Set display mode (Stretching, original size etc.)
CALL METHOD go_picture->set_display_mode
EXPORTING
DISPLAY_MODE = CL_GUI_PICTURE=>display_mode_fit_center
EXCEPTIONS = 1.
Load picture from SAP Icons. To oad a picture from an URL use method
load_picture_from_url
CALL METHOD go_picture->load_picture_from_sap_icons
EXPORTING
icon = icon_delete
EXCEPTIONS error = 1.
ENDIF.
ENDMODULE. [/code]
check the below link.
http://www.sapgenie.com/abap/controls/picture.htm
Award points if helpful.
Regards,
Shiva KUmar -
How to give the application server file path in the module pool programming
Hi,
Could somebody help me how to provide the application server file path in module pool programming once the logo is uploaded to sap system.
For eg I have imported a logo name owens into sap system by using transaction se78; now I need to call the path in the below url,
if container2 is initial.
CREATE OBJECT CONTAINER2
EXPORTING
CONTAINER_NAME = 'PICTURE_CONTAINER2'.
CREATE OBJECT PICTURE2
EXPORTING
PARENT = CONTAINER2.
CALL METHOD PICTURE2->SET_DISPLAY_MODE
EXPORTING
DISPLAY_MODE = CL_GUI_PICTURE=>display_mode_fit_center
EXCEPTIONS
ERROR = 1.
CALL METHOD PICTURE2->LOAD_PICTURE_FROM_URL
EXPORTING
URL = " ? "
EXCEPTIONS
ERROR = 1
Others = 2.
endif.
Thanks in advance
Deepuhi Deepu,
Use FM '/SAPDMC/LSM_F4_FRONTEND_FILE' for fetching the data from the application server path/presentation server path
Regards,
Santosh -
Hi i need material for module pool and alv's.
hi
i need material for module pool and ALV's(not object oriented) if any one have pls do send that to my
ID [email protected]
thanx in advance.Hi
Check the below link:
http://wiki.ittoolbox.com/index.php/FAQ:What_is_module_pool_program_in_abap%3F
http://help.sap.com/saphelp_46c/helpdata/en/35/26b1aaafab52b9e10000009b38f974/content.htm
http://sap.mis.cmich.edu/sap-abap/abap09/sld011.htm
http://sap.mis.cmich.edu/sap-abap/abap09/index.htm
http://www.geocities.com/ZSAPcHAT
http://www.allsaplinks.com/files/using_table_in_screen.pdf
http://help.sap.com/saphelp_webas630/helpdata/en/9f/db9cdc35c111d1829f0000e829fbfe/content.htm
http://www.sapdevelopment.co.uk/dialog/dialoghome.htm
http://www.sap-img.com/
http://help.sap.com/saphelp_46c/helpdata/en/08/bef2dadb5311d1ad10080009b0fb56/content.htm
http://www.sapgenie.com/links/abap.htm
http://help.sap.com/saphelp_nw04/helpdata/en/c9/5472fc787f11d194c90000e8353423/frameset.htm
You can also check the transaction ABAPDOCU which gives you lot of sample programs.
Also you can see the below examples...
Go to se38 and give demodynpro and press F4.
YOu will get a list of demo module pool programs.
One more T-Code is ABAPDOCU.
YOu can find more examples there.
See the prgrams:
DEMO_DYNPRO_TABLE_CONTROL_1 Table Control with LOOP Statement
DEMO_DYNPRO_TABLE_CONTROL_2 Table Control with LOOP AT ITAB
http://www.geocities.com/ZSAPcHAT
http://www.allsaplinks.com/files/using_table_in_screen.pdf
ALV
ABAP List Viewer
The common features of report are column alignment, sorting, filtering, subtotals, totals etc. To implement these, a lot of coding and logic is to be put. To avoid that we can use a concept called ABAP List Viewer (ALV).
This helps us to implement all the features mentioned very effectively.
Using ALV, We can have three types of reports:
1. Simple Report
2. Block Report
3. Hierarchical Sequential Report
There are some function modules which will enable to produce the above reports without much effort.
All the definitions of internal tables, structures and constants are declared in a type-pool called SLIS.
1. SIMPLE REPORT.
The important function modules are
a. Reuse_alv_list_display
b. Reuse_alv_fieldcatalog_merge
c. Reuse_alv_events_get
d. Reuse_alv_commentary_write
e. Reuse_alv_grid_display
A. REUSE_ALV_LIST_DISPLAY : This is the function module which prints the data.
The important parameters are :
I. Export :
i. I_callback_program : report id
ii. I_callback_pf_status_set : routine where a user can set his own pf status or change the functionality of the existing pf status
iii. I_callback_user_command : routine where the function codes are handled
iv. I_structure name : name of the dictionary table
v. Is_layout : structure to set the layout of the report
vi. It_fieldcat : internal table with the list of all fields and their attributes which are to be printed (this table can be populated automatically by the function module REUSE_ALV_FIELDCATALOG_MERGE
vii. It_events : internal table with a list of all possible events of ALV and their corresponding form names.
II. Tables :
i. t_outtab : internal table with the data to be output
B. REUSE_ALV_FIELDCATALOG_MERGE : This function module is used to populate a fieldcatalog which is essential to display the data in ALV. If the output data is from a single dictionary table and all the columns are selected, then we need not exclusively create the field catalog. Its enough to mention the table name as a parameter(I_structure name) in the REUSE_ALV_LIST_DISPLAY. But in other cases we need to create it.
The Important Parameters are :
I. Export :
i. I_program_name : report id
ii. I_internal_tabname : the internal output table
iii. I_inclname : include or the report name where all the dynamic forms are handled.
II Changing
ct_fieldcat : an internal table with the type SLIS_T_FIELDCAT_ALV which is
declared in the type pool SLIS.
C. REUSE_ALV_EVENTS_GET : Returns table of possible events for a list type
Parameters :
I. Import :
Et_Events : The event table is returned with all possible CALLBACK events
for the specified list type (column 'NAME'). For events to be processed by Callback, their 'FORM' field must be filled. If the field is initialized, the event is ignored. The entry can be read from the event table, the field 'FORM' filled and the entry modified using constants from the type pool SALV.
II. Export :
I_List_type :
0 = simple list REUSE_ALV_LIST_DISPLAY
1 = hierarchcal-sequential list REUSE_ALV_HIERSEQ_LIST_DISPLAY
2 = simple block list REUSE_ALV_BLOCK_LIST_APPEND
3 = hierarchical-sequential block list
REUSE_ALV_BLOCK_LIST_HS_APPEND
D. REUSE_ALV_COMMENTARY_WRITE : This is used in the Top-of-page event to print the headings and other comments for the list.
Parameters :
I. it_list_commentary : internal table with the headings of the type slis_t_listheader.
This internal table has three fields :
Typ : H header, S selection , A - action
Key : only when typ is S.
Info : the text to be printed
E. REUSE_ALV_GRID_DISPLAY : A new function in 4.6 version, to display the results in grid rather than as a preview.
Parameters : same as reuse_alv_list_display
This is an example for simple list.
2. BLOCK REPORT
This is used to have multiple lists continuously.
The important functions used in this report are:
A. REUSE_ALV_BLOCK_LIST_INIT
B. REUSE_ALV_BLOCK_LIST_APPEND
C. REUSE_ALV_BLOCK_LIST_HS_APPEND
D. REUSE_ALV_BLOCK_LIST_DISPLAY
A. REUSE_ALV_BLOCK_LIST_INIT
Parameters:
I. I_CALLBACK_PROGRAM
II. I_CALLBACK_PF_STATUS_SET
III. I_CALLBACK_USER_COMMAND
This function module is used to set the default gui status etc.
B. REUSE_ALV_BLOCK_LIST_APPEND
Parameters :
Export :
I. is_layout : layout settings for block
II. it_fieldcat : field catalog
III. i_tabname : internal table name with output data
IV. it_events : internal table with all possible events
Tables :
i. t_outtab : internal table with output data.
This function module adds the data to the block.
Repeat this function for all the different blocks to be displayed one after the other.
C. REUSE_ALV_BLOCK_LIST_HS_APPEND
This function module is used for hierarchical sequential blocks.
D. REUSE_ALV_BLOCK_LIST_DISPLAY
Parameters : All the parameters are optional.
This function module display the list with data appended by the above function.
Here the functions REUSE_ALV_FIELDCATALOG_MERGE, REUSE_ALV_EVENTS_GET, REUSE_ALV_COMMENTARY_WRITE can be used.
3. Hierarchical reports :
Hierarchical sequential list output.
The function module is
A. REUSE_ALV_HIERSEQ_LIST_DISPLAY
Parameters:
I. Export:
i. I_CALLBACK_PROGRAM
ii. I_CALLBACK_PF_STATUS_SET
iii. I_CALLBACK_USER_COMMAND
iv. IS_LAYOUT
v. IT_FIELDCAT
vi. IT_EVENTS
vii. i_tabname_header : Name of the internal table in the program containing the
output data of the highest hierarchy level.
viii. i_tabname_item : Name of the internal table in the program containing the
output data of the lowest hierarchy level.
ix. is_keyinfo : This structure contains the header and item table field
names which link the two tables (shared key).
II. Tables
i. t_outtab_header : Header table with data to be output
ii. t_outtab_item : Name of the internal table in the program containing the
output data of the lowest hierarchy level.
slis_t_fieldcat_alv : This internal table contains the field attributes. This internal table can be populated automatically by using REUSE_ALV_FIELDCATALOG_MERGE.
Important Attributes :
A. col_pos : position of the column
B. fieldname : internal fieldname
C. tabname : internal table name
D. ref_fieldname : fieldname (dictionary)
E. ref_tabname : table (dictionary)
F. key(1) : column with key-color
G. icon(1) : icon
H. symbol(1) : symbol
I. checkbox(1) : checkbox
J. just(1) : (R)ight (L)eft (C)ent.
K. do_sum(1) : sum up
L. no_out(1) : (O)blig.(X)no out
M. outputlen : output length
N. seltext_l : long key word
O. seltext_m : middle key word
P. seltext_s : short key word
Q. reptext_ddic : heading (ddic)
R. ddictxt(1) : (S)hort (M)iddle (L)ong
S. datatype : datatype
T. hotspot(1) : hotspot
Simple ALV report
http://www.sapgenie.com/abap/controls/alvgrid.htm
http://wiki.ittoolbox.com/index.php/Code:Ultimate_ALV_table_toolbox
ALV
1. Please give me general info on ALV.
http://www.sapfans.com/forums/viewtopic.php?t=58286
http://www.sapfans.com/forums/viewtopic.php?t=76490
http://www.sapfans.com/forums/viewtopic.php?t=20591
http://www.sapfans.com/forums/viewtopic.php?t=66305 - this one discusses which way should you use - ABAP Objects calls or simple function modules.
2. How do I program double click in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=11601
http://www.sapfans.com/forums/viewtopic.php?t=23010
3. How do I add subtotals (I have problem to add them)...
http://www.sapfans.com/forums/viewtopic.php?t=20386
http://www.sapfans.com/forums/viewtopic.php?t=85191
http://www.sapfans.com/forums/viewtopic.php?t=88401
http://www.sapfans.com/forums/viewtopic.php?t=17335
4. How to add list heading like top-of-page in ABAP lists?
http://www.sapfans.com/forums/viewtopic.php?t=58775
http://www.sapfans.com/forums/viewtopic.php?t=60550
http://www.sapfans.com/forums/viewtopic.php?t=16629
5. How to print page number / total number of pages X/XX in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=29597 (no direct solution)
6. ALV printing problems. The favourite is: The first page shows the number of records selected but I don't need this.
http://www.sapfans.com/forums/viewtopic.php?t=64320
http://www.sapfans.com/forums/viewtopic.php?t=44477
7. How can I set the cell color in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=52107
8. How do I print a logo/graphics in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=81149
http://www.sapfans.com/forums/viewtopic.php?t=35498
http://www.sapfans.com/forums/viewtopic.php?t=5013
9. How do I create and use input-enabled fields in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=84933
http://www.sapfans.com/forums/viewtopic.php?t=69878
10. How can I use ALV for reports that are going to be run in background?
http://www.sapfans.com/forums/viewtopic.php?t=83243
http://www.sapfans.com/forums/viewtopic.php?t=19224
11. How can I display an icon in ALV? (Common requirement is traffic light icon).
http://www.sapfans.com/forums/viewtopic.php?t=79424
http://www.sapfans.com/forums/viewtopic.php?t=24512
12. How can I display a checkbox in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=88376
http://www.sapfans.com/forums/viewtopic.php?t=40968
http://www.sapfans.com/forums/viewtopic.php?t=6919
Go thru these programs they may help u to try on some hands on
ALV Demo program
BCALV_DEMO_HTML
BCALV_FULLSCREEN_DEMO ALV Demo: Fullscreen Mode
BCALV_FULLSCREEN_DEMO_CLASSIC ALV demo: Fullscreen mode
BCALV_GRID_DEMO Simple ALV Control Call Demo Program
BCALV_TREE_DEMO Demo for ALV tree control
BCALV_TREE_SIMPLE_DEMO
BC_ALV_DEMO_HTML_D0100
Reward points if useful
Regards
Anji -
PICTURE ON A MODULE POOL SCREEN
Hi All.
I have an issue in module pool program.
I designed a screen with number 100.
on this screen they want to put some picture...like some logo.
Is it possible to put the picture on this screen 0100.
Please can any body ,help me to solve this issue.
Thanks in advance,
Regards,
Eswar.Hello,
You can use picture control to attach a picture to your screen.The sample code is below:
The custom container in the screen layout is named as 'CONTAINER'.
REPORT SAMPLE.
DATA: picture type ref to cl_gui_picture,
cont type ref to cl_gui_custom_container.
DATA: I_EVENTS TYPE CNTL_SIMPLE_EVENTS,
WA_EVENTS TYPE CNTL_SIMPLE_EVENT,
OK_CODE TYPE SY-UCOMM,
p_url type cndp_url.
Class click definition.
PUBLIC SECTION.
METHODS: click_handle for event picture_click of cl_gui_picture
importing MOUSE_POS_X MOUSE_POS_Y.
endclass.
DATA: click_variable type ref to click.
class click implementation.
method click_handle.
DATA: X_POS(5),Y_POS(5).
X_POS = MOUSE_POS_X.
Y_POS = MOUSE_POS_Y.
MESSAGE I000(OK) WITH 'Picture Click' X_POS Y_POS.
endmethod.
endclass.
START-OF-SELECTION.
call screen 100.
*& Module STATUS_0100 OUTPUT
text
MODULE STATUS_0100 OUTPUT.
SET PF-STATUS 'GUI'.
SET TITLEBAR 'xxx'.
if cont is initial.
CREATE OBJECT CONT
EXPORTING
CONTAINER_NAME = 'CONTAINER'.
CREATE OBJECT PICTURE
EXPORTING
LIFETIME =
SHELLSTYLE =
PARENT = cont
NAME =
EXCEPTIONS
ERROR = 1
others = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
wa_events-EVENTID = picture->EVENTID_PICTURE_CLICK.
wa_events-APPL_EVENT = 'X'.
append wa_events to i_events.
CALL METHOD PICTURE->SET_REGISTERED_EVENTS
EXPORTING
EVENTS = i_events.
create object click_variable.
set handler click_variable->click_handle for picture.
CALL METHOD PICTURE->SET_3D_BORDER
EXPORTING
BORDER = 1.
CALL FUNCTION 'DP_PUBLISH_WWW_URL'
EXPORTING
OBJID = 'HTMLCNTL_TESTHTM2_SAP_AG'
LIFETIME = cndp_lifetime_transaction
IMPORTING
URL = p_url
IF SY-SUBRC = 0.
CALL METHOD PICTURE->LOAD_PICTURE_FROM_URL_ASYNC
EXPORTING
URL = p_url.
ENDIF.
endif.
ENDMODULE. " STATUS_0100 OUTPUT
*& Module USER_COMMAND_0100 INPUT
text
MODULE USER_COMMAND_0100 INPUT.
CASE OK_CODE.
WHEN 'BACK'.
LEAVE PROGRAM.
WHEN 'NORMAL'.
CALL METHOD PICTURE->SET_DISPLAY_MODE
EXPORTING
DISPLAY_MODE = CL_GUI_PICTURE=>DISPLAY_MODE_NORMAL.
WHEN 'FIT'.
CALL METHOD PICTURE->SET_DISPLAY_MODE
EXPORTING
DISPLAY_MODE = CL_GUI_PICTURE=>DISPLAY_MODE_FIT.
WHEN 'NORMAL_C'.
CALL METHOD PICTURE->SET_DISPLAY_MODE
EXPORTING
DISPLAY_MODE = CL_GUI_PICTURE=>DISPLAY_MODE_NORMAL_CENTER.
WHEN 'FIT_C'.
CALL METHOD PICTURE->SET_DISPLAY_MODE
EXPORTING
DISPLAY_MODE = CL_GUI_PICTURE=>DISPLAY_MODE_FIT_CENTER.
WHEN 'STRETCH'.
CALL METHOD PICTURE->SET_DISPLAY_MODE
EXPORTING
DISPLAY_MODE = CL_GUI_PICTURE=>DISPLAY_MODE_STRETCH.
WHEN 'CLEAR'.
CALL METHOD PICTURE->CLEAR_PICTURE.
WHEN SPACE.
CALL METHOD PICTURE->LOAD_PICTURE_FROM_URL
EXPORTING
URL = P_URL.
IMPORTING
RESULT = RETURN.
CALL METHOD CL_GUI_CFW=>FLUSH.
endcase.
endmodule.
Also check demo program:RSDEMO_PICTURE_CONTROL
<b>TO GET DIFFERENT PICTURES</b>:
(The following is <b>Judith Jessie Selvi's</b> reply for a similar query.Unfortunately I'm not able to track the URL of that thread).
Refer this link
1... create a logo using paint shop and save it as tifffile then using RSTXLDMC (is a program name) used to upload logo
2.....create a logo using paint shop and save it as bmpfile then using SE78 you can do this.
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCCIIMAGE/BCCIIMAGE.pdf
http://www.sap-img.com/human/linking-employee-photos-using-sap-archive-link.htm
Transaction OAOR,
- OAOR (Business Document Navigator)
Give Class Name - PICTURES Class Type - OT..... then Execute
It will show you the list, then select ENJOYSAP_LOGO.
On that list, you will find one control with a "create" tab.
Click std. doc types.
Select SCREEN and double-click.
It will push FILE selection screen.
Select your company logo (.gif) and press OK.
It will ask for a description- for instance: "company logo".
It will let you know your doc has been stored successfully.
You can find your logo under ENJOYSAP_LOGO->Screen->company logo.
Just run your ALV program, you should find your company logo in place of the EnjoySAP logo.
Regards,
Beejal
**Reward if this helps -
Picture visibility in module pool
hello ppl.
i have developed a program using module pool. i have displayed a logo on the initial screen using the class CL_GUI_PICTURE. i require to hide this logo or make it invisible on the next screen, but should always be displayed on the initial screen. i tried using SET_VISIBLE method, but its not working.
pls gimme some suggestions .
thnks...Hi,
either use screen-group field value or
use as
loop at screen.
field-name[
screen-active = '0'.
screen-input = '0'.
screen-output = '0'.
screen-invisible = '0'.
endloop.
Regards
ricky -
Can anybody Provide me good step by step procedure for module pool and smart for programming with screenshot.
my email Id is [email protected]Hi,
A module pool is a collection of screens, flow logic, menu bars and ABAP code that you use to build an application. Typically the transaction code that calls the application will refer to the module pool and the initial screen number.
-->What are the requirements a dialog program must fulfill ?
A dialog program must fulfill the following requirements
. a user friendly user interface
. format and consistency checks for the data entered by the user
. easy correction of input errors
. access to data by storing it in the database.
What are the basic components of dialog program ?
Screens (Dynpros)
Each dialog in an SAP system is controlled by dynpros. A Dynpro consists of a screen and its flow logic and controls exactly one dialog step.
ABAP/4 module pool
Each dynpro refers to exactly one ABAP/4 dialog program. Such a dialog program is also called a module pool, since it consists of interactive modules.
What is a dynpro ? What are its components ?
A dynpro (DYnamic PROgram) consists of a screen and its flow logic and controls exactly
one dialog step.
- The different components of the dynpro are:
Flow logic: Calls of the ABAP/4 modules for a screen
Screen layout: Positions of the texts, fields, pushbuttons, and so on for a screen
Screen attributes: Number of the screen, number of the subsequent screen, and others
Field attributes: Definition of the attributes of the individual fields on a screen
What is screen flow logic? What are the selections in it? Explain PAI and PBO?
Ans - Screen flow logic contains the procedural part of a screen. The screen flow logic is like an ABAP program in that it serves as a container for processing blocks. There are four event blocks, each of which is introduced with the screen keyword PROCESS:
PROCESS BEFORE OUTPUT.
PROCESS AFTER INPUT.
PROCESS ON HELP-REQUEST.
PROCESS ON VALUE-REQUEST.
Selections are performed in PAI.
PROCESS BEFORE OUTPUT (PBO) is automatically triggered after the PAI processing of the previous screen and before the current screen is displayed. You can program the PBO processing of the screen in this block. At the end of the PBO processing, the screen is displayed.
PROCESS AFTER INPUT (PAI) is triggered when the user chooses a function on the screen. You can program the PAI processing of the screen in this block. At the end of the PAI.
processing, the system either calls the next screen or carries on processing at the point from which the screen was called.
PROCESS ON HELP-REQUEST (POH) and PROCESS ON VALUE-REQUEST (POV) are triggered when the user requests field help (F1) or possible values help (F4) respectively. You can program the appropriate coding in the corresponding event blocks. At the end of processing, the system carries on processing the current screen.
step by step process of dialog programing:
Firstly, you can go to Tcode SE80 and here create a package.
On that package name right click and select program.
Then choose program type modulepool program.
Similarly, you can create screen and then select layout and drag and drop labels and pushbuttons as per your requirements.. Then double click on th push buttons.You will see property window and there we will find FCTCODE and there type the names e.g suppose you want to
display then typy on the fctcode Display or any name as you wish.
After that save and activate it. and then close the window.
And then go back to the intial screen .
And then click Flow logic button and then uncomment the statement
module status_1000 PBO block and then doible click on status_1000
save and activate and then go back and then PAI block uncomment the statement module status_1000 and the dobule click on status_1000.
step by step process of creating smartforms:
1. What is Smartforms?
Smartforms is a tool to create and maintain forms for mass printing in SAP Systems. Just like sapscripts, for Smart
forms print program is used to create the output internal table which in turn is thrown to the smart form where the
field values are displayed. The output medium for Smartforms support printer, fax, e-mail, or the Internet.
Transaction Code: SMARTFORMS
To print a form the program for the data retrieval and a Smartform that contains the entire form logic is required. As
these two are separate one should adapt the Smartform if changes to the form logic are necessary. The application
program passes the data via a function module interface to the Smartform. When activating the Smartform the system
automatically generates the function module.
The architecture of the smart form is given below:
Creating Forms Using SAP Smart Forms
When creating a form one must:
1. Retrieve the application data
2. Describe the form
3. Pass the application data to the form
Example: Create Smartform for printing Purchase order.
Retrieving the application data (Purchase Order information):
Write an ABAP program (Print Program) to retrieve data or include a retrieval routine into the application. This
code consists of statements that select data from databases according to certain selection criteria. Store the
retrieved data in internal tables, structures or variables and transfer it to the form in one step.
SAP has already provided with the Print Program (/SMB40/FM06P) for Purchase Order. Based on the business
requirement, this Print Program can be copied and modified to get the required data and transfer to Smartform.
Describing the Form:
The user defines the form using a Smartform. Use the tools of the form builder as listed below:
1. Use the form painter to position the windows, graphics and addresses on a page.
2. Use the PC editor to write the texts.
3. Use the table painter to format the tables.
The flow control is used to print the pages and elements.
Form Logic (Introduction)
In the form builder one can describe a Smartform by a set of nodes. To do this, one can build up a tree structure on
the left side of the user interface.
The node global settings and its three successors form attributes, form interface and global definitions always exists
for any newly created forms.
To describe the form logic, create the hierarchy under the node pages and windows.
The following rules apply to control the flow of the form output.
1. The nodes in the tree structure are processed from top to bottom.
2. For each node there is a tab, this can be used to link the node to a condition. If the condition is true, the
system processes the node. If not, it skips the node and all its successors.
3. One should define a next page for each page.
The SAP form builder of the smart form consists of:
1. Form painter for creating the layout of the form
2. PC Editor for entering texts and fields into output areas
3. Navigation tree for maintaining the form logic
4. Table painter for creating templates and tables
To define the text formats, one can use the Smart Styles.
Style builder:
On the left of the style builder screen consists of the predetermined nodes (header data, folder for paragraph
formats, and folder for character formats).
On the right one can see the maintenance screen with its tab pages. At the bottom the preview of the selected font
can be viewed.
Create Purchase Order Smartform
Create a Smartform, copy the existing SAP provided purchase order Smartform to ZSFM_PURCHASEORDER for
customizing as per business requirement.
1. Form Settings under Global Settings node, set the parameters in Output Option:
Page Format: Letter
Character per Inch: 20
Line per Inch: 6
Style: ZSTM_SMB40_SF
Output Format: Standard Output
2. Form Interface
We can add parameters in the Import Parameters and tables in Tables tab of the form interface for the application
data to be available for the Smartform to print.
3. In Global definition we can define the all the global variables which can be used in Smartforms. Initialization
can be used for initializing the variables and even for retrieving the data.
Creating pages:
Each form consists of one or more pages. The first page in the tree structure is the start page and the
processing of the form starts with this page itself.
1. Open the context menu for existing page node and choose create®page
2. Enter a unique name (FIRST) for the node and a description (Page)
3. Determine the format (1, 2, 3...)and the mode of the page counter (Increase counter) on the general
attributes tab
4. Determine the print attributes (Portrait Format) of the page on the output options
5. Determine a background graphic for the entire page on the background tab (Not used in PO).
Creating windows:
The size and position of the window can be graphically set in the form painter. There are main windows and
secondary windows. The difference between these two is that the output in a main window can cover several
pages.
1. Open the context menu for an existing page node and choose®window
2. Enter a name for the node (NAMEFORM) and a description (Title Window).
3. On the general attributes indicate type of window. NAMEFORM is secondary window.
In similar fashion all the other windows are created and positioned as per the form design. Only one MAIN
window is created, it is used for line items which can cover several pages.
Positioning texts on the form
The texts are displayed in the form using text nodes. The only exceptions are addresses.
The predecessor node of the text node determines its use:
Predecessor node Used to
Secondary window Position text on one or more pages
Main window Display text in relation to other nodes in the main window, it may cover several pages
Template Displays texts for table cells of a static table
Table Display table contents
There are three text types:
1. Text element : to enter new text in the PC editor
2. Text module : to include a text module
3. Include text : to include an existing SAPscript text
Entering texts in PC editor: (TITLE)
· To create a text node call the context menu for that node in the tree structure that should receive the
text, then choose->text
· Enter a unique name (TITLE) for the node and the node description (TITLE)
· On the general attributes tab choose text element as text type
· In the text node box choose whether the text should be started with a new paragraph or only in a new
line
· Enter the text in the PC editor. Text could be a program element like &Title& or Purchase Order. &Title&
is a variable for which the value is assigned in Program line before the text.
Including text modules: (TERMSCONDITION)
Text module of the text node is used to refer to an existing text module in the system. The text modules can be
used in two ways:
· To create a text node, call the context menu for that node in the tree structure that shall contain the text
and choose create->text under the window TERMSCONDITION.
· Enter a unique name for the node (TERMSCONDITION) and a description (Terms and Condition)
· On the general attributes tab select the text type text module
· Enter the name of the text module in the text name field (&G_TERMS_TEXT&). &G_TERMS_TEXT& is
used to determine the Text name dynamically in the program lines preceding the text module node.
· Program Lines: GETTERMSCONDITION
Concatenate 'ZTMM_PO_TERMS_' ZXEKKO-BUKRS
INTO G_TERMS_TEXT.
Including SAPscript texts: (HD_TXT_F01 Order Header Text)
The text type include text node to refer to a SAPscript text, which already exists in the system. To identify the
text the text name, object, id and the language is needed.
· To create the text node, call the context menu for that node in the tree structure that shall receive the
text and choose create -> text under the main window.
· Enter a unique name (HD_TXT_F01) for the node and the node description (Order Header Text).
· On the general attributes tab choose include text as text type
· Text Name - &ZEKKO-EBELN&, Text Object EKKO, Text ID F01, Language - &SY-LANGU&. Also check
mark No error if no text exists.
Tip: Since the size of text is not known, its better to have the text in MAIN window, so that it can run to more
than one page if required.
Inserting addresses: (SENDER):
Address node is used to insert an address into the form. This guarantees that the address is formatted
according to the postal rules of the sender country.
· To create an address node , call the context menu for that node in the tree structure that one wants to
contain the text and choose create->Address
· Enter a name for the node (COMPANY_CODE_ADDRESS) and a description (Company Code Address)
· Determine the address type (Organization Address) on the general attributes tab
· For organizational addresses - specify the address number, for any other - specify the person number
and the address number. In this case we get the company code address into variable &ADDNR&, so we need
program lines (SENDER) preceding the address text.
· In the box additional addresses, attributes to specify how to display the address are maintained.
Printing graphics: (LOGO):
Tcode SE78 is used to import graphics into the SAP system. The transaction imports the graphics and stores it
in the BDS (business transaction server) and then it can be displayed in the form.
· To create the graphic node , call the context menu for that node in the tree structure and choose create-
>graphic
· Enter a name (LOGO) for the node and the description (Logo Graphic)
· On the general attributes determine whether a colored or a black and white
· On General Attributes use the fields object - GRPAHIC, id BMAP and name - &G_LOGO& to identify the
graphic. &G_LOGO& is variable and therefore we can print company code specific logo. Program line preceding
the graphic is required.
· Program line COMP_LOGO is used to assign the value to G_LOGO. Concatenate 'ZCOMPANY_LOGO_'
ZXEKKO-BUKRS INTO G_LOGO. So, the name of graphic for example will be ZCOMPANY_LOGO_0202 for
company code 0202.
Displaying a static table (Window INFO, Template - TEM_INFO)
Use node type template to display a table whose layout and size is determined before the runtime of the print
program.
To create a template, define a table layout to determine the cell structure for each line. The cells are used to
display the cell structure for each line. The cells are used to display the contents of the successor nodes of the
template node.
· Create Template under the INFO window node. Create > Template.
The template layout is used to determine the following,
1. The number of lines and cells
2. The height of each cell
3. The width of each cell
4. The alignment of the table in the window
5. Whether and where to display separator lines or frames
Use the table control on the template tab to define the layout of the lines. Each line of the template must have
a definition.
Use the pattern box to select the desired table pattern.
Displaying contents in cells: (TLE_CONTACT)
The template node defines the table layout. The successor nodes of the template determine the data to be
displayed in the table cells.
In General Attributes choose Text type Text Element. In editor, type DTE Contact.
In Output Options, define the output structure LINE 5 and Column 1.
Similarly all other information for each cell can be filed using the text module and address module.
Displaying Dynamic Table (ITEM_TABLE)
· Create TABLE under the MAIN window node. In DATA Tab, loop through the data internal table.
L_XEKPO is the item table which has all the line item details.
Define the line types based on the positioning of the text in main window. For example: TABLE_HEADER1
is used for positioning Header texts in the table.
· Table is divided into three parts: Header, Main Area and Footer.
· Header is used for printing the Header Title of the table and it at the start of the table on every page.
· Main Area is used to print the line item details of the PO. Create a line (ITEM_DETAIL) of the line type
TABLE_HEADER1. It will dynamically generate number cells based on the line type defined in the table layout.
Name all the cells as per the usage. For each cell create the text node to display the information. For example:
Cell VAL_MATERIAL, Text node MATNR is created which has text element - -matnr.
· Footer is used for printing the information after Main Area data is printed. This can be used for Total
printing or any other information which needs to be printed after all line items are printed. Create line
TLE_CONTR_STP for Contractual Stipulation of the line type LINE which has only one column. Create the
text element to print the information.
Special Requirement: Printing the Acknowledgement text if the order value is greater then USD 50,000.00 on
the second copy only.
· This requirement needs the modification in the print program and the Smartform.
· Modification in Print Program to trigger the second copy if the order value is greater then 50K. Its
advisable to copy the standard print program to custom Z program (Z_SMB40_FM06P), and changes should
be made to Z program. Number of copies is passed from NAST to ls_composer_param-tdcopies in Smartforms.
The value ls_composer_param-tdcopies is modified in the print program to 2 if the order value is greater then
50K.
· The printing of Acknowledgement Text only on second copy is achieved using the COPIES WINDOW in
Smartforms. Define Window ACKN_COPY of the type COPIES WINDOW and Output to Only Copies Copies
Differ. Also set the condition in the Condition Tab of the window SFSY-JOBPAGES = 1, so that it only print
on the first page of the copy.
· If user selects to print 2 copies and the order value is more then 50k, program needs to print 2 sets
meaning 4 copies. So number of copies is taken care of in Print program but again the printing of
Acknowledgement Text should be only the Even number copy meaning Copy# 2 and 4. This achieved by using
the program lines to determine the even copy. SFSY-COPYCOUNT will tell us the current copy number being
printed.
regards,
vineela.
Edited by: Radha Vineela Aepuru on Mar 13, 2008 11:12 AM -
How to delete the row in table control with respect to one field in module pool programming?
Hi,
Can I know the way to delete the row in table control with respect to one field in module pool programming
Regards
Darshan MSHI,
I want to delete the row after the display of table control. I have created push button as delete row. If I click on this push button, the selected row should get deleted.
I have written this code,
module USER_COMMAND_9000 input.
DATA OK_CODE TYPE SY-UCOMM.
OK_CODE = SY-UCOMM.
CASE OK_CODE.
WHEN 'DELETE'.
LOOP AT lt_source INTO ls_source WHERE mark = 'X'.
APPEND LS_SOURCE TO LT_RESTORE.
DELETE TABLE LT_SOURCE FROM LS_SOURCE.
SOURCE-LINES = SOURCE-LINES - 1.
ENDLOOP.
But I'm unable to delete the selected rows, It is getting deleted the last rows eventhough I select the other row.
So I thought of doing with respect to the field. -
How to use table maintenance view in module pool screen
hi ,
want to use table maintenance view in a module pool screen so that i can edit, insert, delete and update date in to the ztable.please help.You can simply call it via SM30. Or you can call the table maintence view from any program(report or module pool) using a function module.
call function 'VIEW_MAINTENANCE_CALL'
exporting
action = 'U'
view_name = 'Z_Table_Name'
exceptions
client_reference = 1
foreign_lock = 2
invalid_action = 3
no_clientindependent_auth = 4
no_database_function = 5
no_editor_function = 6
no_show_auth = 7
no_tvdir_entry = 8
no_upd_auth = 9
only_show_allowed = 10
system_failure = 11
unknown_field_in_dba_sellist = 12
view_not_found = 13
others = 14.
Regards,
RIch Heilman -
Error while transporting modification in module pool of a specific infotype
HI experts,
While transporting some modifications that have be done on the PAI of a module pool of a specific infotype, we have an error with code return = 8, the error is --> Original object R3TRPROGMP900730 must not be changed!!!
Any suggestion .
Tanhks a lot .Hi ,
Nice to know that your problem is solved. If any of the replies were usefull please acknowledge their work.
And it would be great if you can just put in your remarks about the best solution you had in solving that problem.
It might be useful to other users when they encoutner such problem.
BR,
Vijay. -
Getting error while calling a subscreen in module pool program
HI ALL,
ACTUALLY I'M GETTING A SYNTAX ERROR WHILE I'M CALLING A SUBSCREEN
IN A MODULE POOL PROGRAM IN PAI MODULE
THE ERROR IS AS FOLLOW
"." or "ID ... FIELD ..." expected after "SUBSCREEN"
CAN ANYBODY PLS HELP ME.
REGARDS
ANDREWSHI MAX ,
THE CODE IS AS FOLLOWS:
*& Report ZTABSTRIP_PS
REPORT ZTABSTRIP_PS.
type-pools : vrm.
DATA:number1 type I,
number2 type I,
result type I,
ok_code like SY-UCOMM,
employee1 type c,
ABAP(19) type c,
SALES(19) type c,
HR(19) type c,
MM(19) type c,
employee type c.
emp type c.
CONTROLS tabstrip TYPE TABSTRIP.
CALL SCREEN 100.
call screen 110.
call screen 130.
call screen 120.
call screen 140.
*& Module STATUS_0100 OUTPUT
text
MODULE STATUS_0100 OUTPUT.
SET PF-STATUS 'STATUS'.
SET TITLEBAR 'TITLE'.
CASE OK_CODE.
WHEN 'BACK' or 'EXIT' or 'DELETE'.
leave program.
WHEN 'SAVE'.
MESSAGE 'please choose a valid function' TYPE 'I'.
WHEN 'BACK'.
leave PROGRAM.
when 'EXIT' or 'DELETE'.
leave to screen 0.
WHEN 'SAVE'.
MESSAGE 'please choose a valid function' TYPE 'I'.
endcase.
ENDMODULE. " STATUS_0100 OUTPUT
*& Module USER_COMMAND_0100 INPUT
text
MODULE USER_COMMAND_0100 INPUT.
CASE OK_CODE.
when 'TAB1'.
tabstrip-activetab = 'TAB1'.
when 'TAB2'.
tabstrip-activetab = 'TAB2'.
result = number1 + number2.
when 'TAB3'.
tabstrip-activetab = 'TAB3'.
SET TITLEBAR 'TITLE1'.
when 'TAB4'.
tabstrip-activetab = 'TAB4'.
if employee = 'NEERAJ'.
ABAP = 'NEERAJ'.
elseif employee = 'UMESH'.
SALES = 'UMESH'.
ELSEIF employee = 'RAM'.
HR = 'RAM'.
elseif employee = 'ANIL'.
MM = 'ANIL'.
endif.
employee = employee.
WHEN 'BACK'.
leave PROGRAM.
when 'EXIT' or 'DELETE'.
leave to screen 0.
WHEN 'SAVE'.
MESSAGE 'please choose a valid function' TYPE 'I'.
ENDCASE.
WHEN 'BACK' or 'EXIT' or 'DELETE'.
leave program .
WHEN 'SAVE'.
MESSAGE 'please choose a valid function' TYPE 'I'.
endcase.
ENDMODULE. " USER_COMMAND_0100 INPUT
*& Module STATUS_0110 OUTPUT
text
**MODULE STATUS_0110 OUTPUT.
SET PF-STATUS 'STATUS1'.
SET TITLEBAR 'xxx'.
**case ok_code.
**WHEN 'back' or 'exit' or 'delete'.
leave PROGRAM.
WHEN 'save'.
MESSAGE 'please choose a valid function ' TYPE 'W'.
ENDCASE.
**ENDMODULE. " STATUS_0110 OUTPUT
*& Module USER_COMMAND_0110 INPUT
text
MODULE USER_COMMAND_0110 INPUT.
number1 = number1.
number2 = number2.
CLEAR NUMBER1.
CLEAR NUMBER2.
REFRESH NUMBER1.
REFRESH NUMBER2.
ENDMODULE. " USER_COMMAND_0110 INPUT
*& Module STATUS_0130 OUTPUT
text
MODULE STATUS_0130 OUTPUT.
SET PF-STATUS 'STATUS2'.
SET TITLEBAR 'xxx'.
RESULT = number1 + number2.
*CLEAR RESULT.
REFRESH RESULT.
ENDMODULE. " STATUS_0130 OUTPUT
*& Module STATUS_0120 OUTPUT
text
MODULE STATUS_0120 OUTPUT.
SET PF-STATUS 'xxxxxxxx'.
SET TITLEBAR 'xxx'.
DATA: l_name TYPE vrm_id,
li_list TYPE vrm_values,
l_value LIKE LINE OF li_list.
l_value-key = '1'.
l_value-text = 'ANIL'.
APPEND l_value TO li_list.
CLEAR l_value.
CLEAR li_list.
l_value-key = '2'.
l_value-text = 'RAM'.
APPEND l_value TO li_list.
CLEAR l_value.
CLEAR li_list.
l_value-key = '3'.
l_value-text = 'NEERAJ'.
APPEND l_value TO li_list.
CLEAR l_value.
CLEAR li_list.
l_value-key = '4'.
l_value-text = 'UMESH'.
APPEND l_value TO li_list.
CLEAR l_value.
CLEAR li_list.
l_name = 'employee'.
CALL FUNCTION 'VRM_SET_VALUES'
EXPORTING
ID = l_name
VALUES = li_list
EXCEPTIONS
ID_ILLEGAL_NAME = 1
OTHERS = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CLEAR li_list.
ENDMODULE. " STATUS_0120 OUTPUT
*& Module USER_COMMAND_0120 INPUT
text
MODULE USER_COMMAND_0120 INPUT.
INCLUDING sy-repid '140'.
employee1 = employee.
IF employee1 CS 'NEERAJ'.
call SUBSCREEN sub4 .
ABAP = 'NEERAJ'.
CLEAR ABAP.
ELSEIF employee1 CS 'UMESH'.
call SUBSCREEN sub4 .
SALES = 'UMESH'.
CLEAR SALES.
elseif employee1 CS 'RAM'.
call SUBSCREEN sub4 .
HR = 'RAM'.
CLEAR HR.
ELSEIF employee1 CS 'ANIL'.
call SUBSCREEN sub4 .
MM = 'ANIL'.
CLEAR MM.
endif.
ENDMODULE. " USER_COMMAND_0120 INPUT
*& Module STATUS_0140 OUTPUT
text
MODULE STATUS_0140 OUTPUT.
*CASE OK_CODE.
WHEN employee1 'NEERAJ'.
screen-active = 1.
ABAP = 'NEERAJ'.
WHEN employee1 = 'UMESH'.
screen-active = 1.
SALES = 'UMESH'.
WHEN employee1 = 'RAM'.
screen-active = 1.
HR = 'RAM'.
WHEN employee1 = 'ANIL'.
screen-active = 1.
MM = 'ANIL'.
endif.
*ENDCASE.
ENDMODULE. " STATUS_0140 OUTPUT -
Module pool - table control - update ztable
hello , i doing a module pool that will have few screens , now i have one screen with a table control that fetch the data from a ztable when screen is call the table control is showing the data and is in grey and no editable i add a pf-status for change that mode i can delete the row from the table control but i don't figure out how update to the ztable when i press save , i wan't too another button for add a new row ( and remain the already in grey ) for add new entrie in the table and update the ztable
pd: sorry for my bad english
this is my code:
TOP:
PROGRAM z_pp_lote_etiquetas MESSAGE-ID zz.
TABLES:zc2p_lote_etique,
zc2p_lider_modul.
DATA: ok_code LIKE sy-ucomm.
DATA save_ok LIKE sy-ucomm.
* internal table
DATA: it_zc2p_lote_etique LIKE STANDARD TABLE OF zc2p_lote_etique.
DATA: it_zc2p_lider_modul TYPE STANDARD TABLE OF zc2p_lider_modul WITH HEADER LINE.
DATA: it_zc2p_lider_modul_del TYPE STANDARD TABLE OF zc2p_lider_modul WITH HEADER LINE.
**************Workarea
DATA: wa_c2p_lote_etique TYPE zc2p_lote_etique.
DATA: wa_c2p_lider_modul TYPE zc2p_lider_modul.
DATA: wa_c2p_lider_modul_del TYPE zc2p_lider_modul.
DATA: sel.
DATA: MARK.
DATA: init.
DATA: col TYPE scxtab_column.
DATA: lines TYPE i.
* Variable Declaration
DATA : flg, "Flag to set the change mode
ln TYPE i. "No. of records
* Table Control Declartion.
CONTROLS: zc2p_lider_crtl TYPE TABLEVIEW USING SCREEN '101'.
**PROCESS BEFORE OUTPUT INCLUDE **
*& Include Z_PP_LOTE_ETIQUETAS_O01
*& Module set_status OUTPUT
* Setting the GUI status
MODULE status_0100 OUTPUT.
SET PF-STATUS 'Z_PP_LOT_ETIQ_MENU'.
SET TITLEBAR 'Z_PP_LOT_ETIQ'.
ENDMODULE. " set_status OUTPUT screen 100
* MODULE status_0101 OUTPUT
* Setting the GUI status
MODULE status_0101 OUTPUT.
SET PF-STATUS 'Z_PP_LOT_ETIQ_ME_101'.
SET TITLEBAR 'Z_PP_LOT_ETIQ'.
* Data retreving
if init is INITIAL.
select * from zc2p_lider_modul into CORRESPONDING FIELDS OF TABLE it_zc2p_lider_modul.
DESCRIBE TABLE it_zc2p_lider_modul LINES ln.
zc2p_lider_crtl-lines = ln + 10.
init = 'X'.
endif.
ENDMODULE. "status_0101 OUTPUT
module change_sdyn_conn output.
* you can change the content of current table control line via
* sdyn_conn
READ TABLE it_zc2p_lider_modul INTO zc2p_lider_modul INDEX zc2p_lider_crtl-current_line.
endmodule. " FILL_TABLE_CONTROL OUTPUT
MODULE set_screen_fields OUTPUT.
LOOP AT SCREEN.
IF flg IS INITIAL.
screen-input = 0.
ELSE.
screen-input = 1.
ENDIF.
*ENDIF.
* Modifying the screen after making changes
MODIFY SCREEN.
ENDLOOP.
ENDMODULE. " set_screen_fields OUTPUT
PROCESS AFTER INPUT INCLUDE.
* MODULE USER_COMMAND_0100 INPUT
MODULE user_command_0100 INPUT.
CASE ok_code.
WHEN 'LIDM'.
CALL SCREEN 101.
WHEN 'CANC'.
LEAVE PROGRAM.
WHEN 'BACK'.
LEAVE PROGRAM.
WHEN 'EXIT'.
LEAVE PROGRAM.
ENDCASE.
ENDMODULE. "USER_COMMAND_0100 INPUT
* MODULE USER_COMMAND_0101 INPUT
MODULE user_command_0101 INPUT.
save_ok = ok_code.
CLEAR ok_code.
CASE save_ok.
WHEN 'SORT'.
DATA: fldname(100),help(100).
READ TABLE zc2p_lider_crtl-cols INTO col WITH KEY selected = 'X'.
SPLIT col-screen-name AT '-' INTO help fldname.
SORT it_zc2p_lider_modul BY (fldname).
WHEN 'CHANGE'.
* Setting the flag to make the table control in editable mode[excluding
* primary key].
flg = 'Y'.
WHEN 'BACK'.
CALL SCREEN 100.
LEAVE SCREEN.
WHEN 'CANCEL'.
LEAVE PROGRAM.
WHEN 'EXIT'.
LEAVE PROGRAM.
WHEN 'SAVE'.
MODIFY zc2p_lider_modul FROM it_zc2p_lider_modul.
COMMIT WORK.
ENDCASE.
ENDMODULE. "USER_COMMAND_0101 INPUT
* MODULE read_table_control INPUT
MODULE read_table_control INPUT.
* Check input values
IF mark = 'X' AND save_ok = 'DELETE'.
DELETE TABLE it_zc2p_lider_modul FROM zc2p_lider_modul.
DESCRIBE TABLE it_zc2p_lider_modul LINES zc2p_lider_crtl-lines.
ENDIF.
ENDMODULE. " READ_TABLE_CONTROL INPUT
Screen Flow Logic 100
PROCESS BEFORE OUTPUT.
MODULE status_0100.
PROCESS AFTER INPUT.
MODULE user_command_0100.
Screen Flow Logic 101.
PROCESS BEFORE OUTPUT.
MODULE status_0101.
LOOP AT it_zc2p_lider_modul INTO zc2p_lider_modul WITH CONTROL
zc2p_lider_crtl.
* Dynamic screen modifications
MODULE set_screen_fields.
MODULE change_sdyn_conn.
ENDLOOP.
PROCESS AFTER INPUT.
MODULE user_command_0101.
LOOP AT it_zc2p_lider_modul.
MODULE read_table_control.
ENDLOOP.
i hope somebody can help for what i missing here thanks>
Sanjeev Kumar wrote:
> Hello Edgar,
>
> Problem seems to be there in the flow logic of 101
>
>
> PROCESS BEFORE OUTPUT.
> MODULE status_0101.
> LOOP AT it_zc2p_lider_modul INTO zc2p_lider_modul WITH CONTROL
> zc2p_lider_crtl. " no need to have 'INTO zc2p_lider_modul' above
> * Dynamic screen modifications
> MODULE set_screen_fields.
> MODULE change_sdyn_conn.
> ENDLOOP.
> *
> PROCESS AFTER INPUT.
> MODULE user_command_0101. "this should be shifted after the following LOOP...ENDLOOP.
>
> LOOP AT it_zc2p_lider_modul. "need to have 'WITH CONTROL zc2p_lider_crtl' here
> MODULE read_table_control.
> ENDLOOP.
>
>
>
> With MODULE user_command_0101 call before the LOOP calls the MODIFY statement (under case save_ok 'SAVE') first and Z-table is updated with the old values as the changes are transferred from screen into the internal table it_zc2p_lider_modul in the LOOP...ENDLOOP later.
>
> Try these changes and I hope it will work.
>
> Thanks
> Sanjeev
i do the firts advice but the second one i get syntax error :
my code :
PROCESS AFTER INPUT.
LOOP at it_zc2p_lider_modul WITH CONTROL zc2p_lider_crtl.
MODULE read_table_control.
ENDLOOP.
MODULE user_command_0101.
error :
In the event PROCESS AFTER INPUT, no additions are allowed with "LOOP
AT".
Maybe you are looking for
-
I have different bookmarks on the different computers that I want to sync. I want to have all the bookmarks on all the devices. Is this possible when I sync? Thank you.
-
How to set default file extension in the FileChooser?
We are trying to use the FileChooser but for some reason, it doesn't have any file extensions in the drop down menu (like in windows). Does anyone know how to put this in? Also, how do we set the file name for the saving file, rather than typing the
-
I can't use compressor on leopard
I made clean install of leopard and FCS1, and I did exactly what apple says in this article: "Unable to connect to background process" http://docs.info.apple.com/article.html?artnum=93234 but it still don't work, and i can't encode anything with Dvd
-
Hello Guys, Our DB growth is extremely abnormal since last 7-8 months. It is expanding by almost 20-30 GBs per month. I tried to check the note 195157 and 706478 but I am too confused if I should exactly implement them.. Is there any way to find out
-
Mail Signing and Encryption Algorithms
Hi, Is there a way to select which algorithms are used for signing and encryption when using S/MIME with the Mac Mail app? Thanks and regards, Phil.