Logos look fuzzy in Studio Pro but NOT in the original QT movie
I assembled a flying logo (Photoshop) over video in Adobe After Effects and exported it as a Quicktime movie. The Logo looks anti-aliased and great in both AE and the Quicktime movie. But when I look at it in DVD Studio Pro it looks horrible (jagged and fuzzy). The video looks OK. I've done this a hundred times and never had this problem before!
No I haven't burned a DVD yet. I was hoping that perhaps it was just the viewer resolution in Studio Pro and that the video would look better once it was burned to DVD. I just don't recall seeing this happen before (the viewer window has always looked pretty true) and I've been working with SP for years. Maybe I'm just getting old and my eyes are going.
Guess I should try to follow through on authoring and see what I get.
Similar Messages
-
I want to erase all my files on my old MacBook Pro but not lose the applications.
I just bought a new MacBook Pro Retina. I was to erase all my files off my old MacBook Pro and give it to my cousin. However, I don't want to lose the programs, like Microsoft Office, because I don't have the disks to reinstall them. Anyone know how to erase everything but not lose the applications? Or do I just go manually through each file and delete?
What i would do is wipe the computer by going into recovery mode, then erasing the HD and formating it to Mac osx extended(journaled) then reinstall the operating system. After this is complete, just download a trial of office and enter your product key so you won't need the disk. But if you don't have the product key either then you would have to manually delete everything.
-
Remove the data which is recently loaded, but not disturbing the original
Hello Experts!!
I have few tables in Oracle 9i/10g , and they already have data in them. I am trying to migrate the data coming from variuos source systems into these Oracle tables. There is a chance that after loading I might get some unwanted data into these tables.
How do I remove just that data which I have loaded recently, and do not distrub the original data it already has.
Lot of people have adviced me to backup those tables and reload the data back if there is any problem, but I am looking at a different approach. I just dont want to change the existing system, as lot of users use the system.
Could anyone help me solving this issue.
Thanks,
VishalVisu wrote:
How are you loading the data daily? Is it direct path?
1) Capture the primary key or rowid information into interim table while loading data into target table (either trigger or stored procedure) - triggers will not be fired if the load is direct path, it is the feasible way otherwise as there will be no impact on the existing codeThat's not true. The trigger will disable the direct path, not the other way around.
Simple proof.
TUBBY_TUBBZ?create table for_direct_pathery
2 (
3 column1 number
4 );
Table created.
Elapsed: 00:00:00.07
TUBBY_TUBBZ?
TUBBY_TUBBZ?insert --+ APPEND
2 into for_direct_pathery
3 select 1 from dual ;
1 row created.
Elapsed: 00:00:00.00
TUBBY_TUBBZ?
TUBBY_TUBBZ?select * from for_direct_pathery;
select * from for_direct_pathery
ERROR at line 1:
ORA-12838: cannot read/modify an object after modifying it in parallel
Elapsed: 00:00:00.01
TUBBY_TUBBZ?
TUBBY_TUBBZ?rollback;
Rollback complete.
Elapsed: 00:00:00.00
TUBBY_TUBBZ?
TUBBY_TUBBZ?create or replace trigger disable_direct_path_access
2 before insert on for_direct_pathery
3 begin
4 null;
5 end;
6 /
Trigger created.
Elapsed: 00:00:00.09
TUBBY_TUBBZ?
TUBBY_TUBBZ?insert --+ APPEND
2 into for_direct_pathery
3 select 1 from dual ;
1 row created.
Elapsed: 00:00:00.00
TUBBY_TUBBZ?
TUBBY_TUBBZ?select * from for_direct_pathery;
COLUMN1
1
1 row selected.
Elapsed: 00:00:00.00
TUBBY_TUBBZ?Notice how you can select the table (since it wasn't direct path loaded) when the trigger is in place. -
Buttons work in DVD Studio Pro, but not in DVD Player. Why?
I recently upgraded I movie I made to Dual layer disk. I had already built one for a standard 4.7 dvd but now I was putting on a director's commentary so I need more space. So I opened up the original DVD Studio Pro project, thats worked fine for over a year, then saved it as "director's commentary", then simply changed the settings for a Dual Layer. In DSP the buttons on the first menu work fine. But when I build it and open it up in DVD Player the buttons dont activate. Even when you roll over them there is nothing there.
Whats happening?You can find information on Reader Extensions on the developer center: http://partners.adobe.com/public/developer/livecycle/readerextensions/devcenter.html
For help with the buttons to navigate, go into Designer help and search for "Attaching a database script to a button" (without the quotes) and this should provide you with the information that you need.
Michael, is this where you found your information the first time?
Catherine -
i recently updated my itunes...today i opened it up and moticed abuout 100 songs missing...they are now at the bottom of itunes song list with a number next to them with information mission such as this the example below
01 human (this song should have the killers name as artist and cd title, etc)
01 hosanna hillsong united (this song should have the cd title to it)
02 lay me down burning light
02 leave out all the rest
02 let it be the beatles
03 papercut
when i go under the original folders and files in the itunes folder everything is normal no missing info, etc. but under itunes orgnising its picking and choosing the same songs and putting the track number next to it and others songs in the same cd not. plus info missing. under the infor when i click right button all info missing there...but not under original file.
please helpA response on this subject from another post:
It could be that you have inadvertently imported these CDs into iTunes as part of a compilation. If so, the artists won't show in the artists menu on the iPod.
To check, highlight the tracks on one of the offending artists CDs in iTunes, right click and select "get info". This brings up a multiple song info window, and from there you can check if you have 'yes' in the box marked "part of a compilation".
If you have, select 'no' instead and click 'ok'. Do this with any CD that has this issue. This will alter the info in iTunes, and you should then connect your iPod and synchronize the changes.
The problem arises because the information contained on the Gracenote CD Data Base (where iTunes gets all it's album/artist/track info from), is sometimes incorrect. It can show CDs as compilations when in fact they are not.
ramstigo wrote:
I had an earlier post on this subject with a similar problem. I tried what you suggested and it worked indeed. You can select the artists from your Ipod on Itunes and after highlighting the artists/albums affected, click NO on the compilation box and the issue is resolved: the artists appear on the list.
Thank you so much!!!!. -
I just purchased a new Macbook Pro Retina, and I have an old Macbook Pro w/o Retina and wish to use migration assistant. I still want to use the older Macbook Pro and keep all the files on it, but copy them and also put them on my new Macbook. What I'm trying to say is, can I use migration assistant to move files to a new Mac, while keeping the files on the old computer?
You can omit some broad categories, but you can't pick and choose individual items.
See Using Setup Assistant on Mountain Lion or Lion (preferred method), or the similar Using Migration Assistant on Mountain Lion or Lion for the gory details. -
Slit Scan looks fine in Motion preview but not when I Export to Movie
I have a project that I finally got to look exactly the way I wanted, but when I export it to a Quicktime Movie, it's all messed up. I used the Slit Scan filter on a PSD image for the background, and it looks great in the preview in Motion, but when I go to export it, the top half and the bottom half alternately drop out to black. I've tried every setting I can think of but nothing changes it. I've tried several different export options as well, but no luck. I'm up against a hard deadline and I just can't get it to work. Anyone have any ideas?
Thanks for your reply, Ben.
The render settings are:
Resolution: Dynamic and Full
Quality: Best
Lighting on
Shadows on
Reflections on
Frame Blending on
In the export settings, I typically just leave everything as current settings, and use canvas settings, but I've tried changing everything and nothing makes any difference. I posted it to YouTube if you'd like to see what the problem is. The link is:
http://youtu.be/oL3Mx5yGKVs
You can see at about the 3 second mark that the Castle logo with drop shadow is on a black background. The background isn't ever supposed to be black, and isn't in the canvas window. It's supposed to vary from light gray, to yellow and white, but never black. There is also supposed to be a white horizontal glow that spans the width of the frame right about the center, and that has just dropped out completely. The top also drops to black and shouldn't. Any help you can give is greatly appreciated. -
Garagekey USB keyboard works with MacBook Pro, but not with 27" iMac
Just got a brandnew 27" iMac. The Garagekey USB keyboard doesn't work. It's recognized in systemProfiler, Audio-Midi Setup, GarageBand and Logic. But no Midi is coming in. When I plug it into my MacBook Pro, it works immediately. I know the Garagekey doesn't work with some 3rd party USB hubs, maybe for lack of enough power, but it works always at the internal USB hubs with the MacBook Pro. Why doesn't it with the 27" iMac? I'm cueless...
The IMac Systemprofiler says: Current Available (mA) 500, Current Required (mA) 300. So I guess, it can't be a power problem?Have the same problem with Logic Pro. Works on my old Mac Mini but not on the new iMac 27" i5. Apple told me that it is a difference between the boards they used on the two computers. They said that even if I got a new mac mini I would run into the same problem. they recommended that I upgrade my mini, or try another piece of hardware to connect the two. Looking for hardware now. Good luck to you.
-
Hi, I have a late 2011 MacBook Pro but cant get the mirroring function to work with Apple TV. I've got the most recent Software 10.7.5 but cant see the mirroring icon or turn this on. I'm able to mirror from my Ipad but not my Mac, any thoughts?
Welcome to the Apple Support Communities
AirPlay Mirroring is supported on your Mac, but it needs OS X Mountain Lion (10.8). See > http://support.apple.com/kb/HT5404
You have two possibilities:
1. Make a backup, open App Store and purchase Mountain Lion to upgrade to this OS X. Then, you will find the AirPlay Mirroring icon at the top right of the display, on the menu bar, or on System Preferences > Displays.
2. Keep OS X Lion and use AirParrot > http://www.airparrot.com
Both options work properly, but I recommend AirPlay Mirroring as it doesn't need a third-party program -
I am a windows user that has converted to Mac and loving it but when I updated to Lion my wireless internet dongle would not work anymore and the Macbook Pro does not recognise the device at all so I am unable to reinstall it again. Any ideas would be greatly appreciated.
Go to Finder > Preferences then select the General tab
Make sure External disks is selected. -
My MacBook Pro turns on but not all the way, it gives me an icon of a grey folder with a question mark in the middle, and won't go further that that. Anyone knows why, or what's the problem?
If these do not resolve the issue or if you are not comfortable with proceeding through these steps then take your Mac to an Apple store or an Apple Authorized Service Provider. An Apple store will perform these initial steps, diagnose the problem, and give an estimate for repairs (if needed). If the Mac is less than one year old or is covered by AppleCare any repairs would be free.
Genius reservation http://www.apple.com/retail/geniusbar/ .
or find an Apple Authorized Service Provider https://locate.apple.com/country -
Can anyone point me in the right direction for the link to download Acrobat 9 Standard. I found the link to download 9 Pro but not standard. Old computer crashed and new computer does not have a CDR/DVD rom drive.
Hi,
Standard or Pro would be licensed through your serial number, the download link and downloaded file would be the same for both of them.
Pro or Standard would be determined after you put in your serial number.
Download Acrobat products | 9, 8
Thank You
Arjun -
I've tried to download the trial version of Acrobat XI pro but it's not working. The time bar is active for the download and indicates that it will take two hours. When I come back, the screen has gone back to the "install free trial here" page. I do see a file for XI Pro, but not a program.
try a direct download,
Downloads available:
Suites and Programs: CC | CS6 | CS5.5 | CS5 | CS4 | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 12 | 11, 10 | 9, 8, 7
Photoshop Elements: 12 | 11, 10 | 9,8,7
Lightroom: 5 | 4 | 3
Captivate: 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'. -
Spry menu look fine in Firefox, Safari but not Intenet Explorer
Help how cann I Spry working fine in Internet Explorer!!!
Look with firefox this page and with Intenet Explorer and see the differents. In Firefox the menu show nice, but into Intenet Explorer not!!
When i open the same page lokale the page ist good till I alow the script inside Internet Explorer....
http://geerthakze.nl/vriendaanzee/index.html
I hope we can find a solution!!!Gramps
Alvast hartelijk dank voor de tips, de voorgestelde wijzegingen staan nu online. Maandag kijk ik hier nog verder naar, nu heb ik nog wat weibg marge links en rechts en staat het submenu nog iets te ver weg.
Als het mogelijk is zou ik de pijljes het liefst voor de tekst willen hebben (maar dat vindt ik minder belangrijk).
Alvast een fijn weekeinde gewenst
Geert
Verstuurd vanaf mijn iPhone
Op 1 okt. 2011 om 15:48 heeft altruistic gramps <[email protected]> het volgende geschreven:
Re: Spry menu look fine in Firefox, Safari but not Intenet Explorer
created by altruistic gramps in Spry Framework for Ajax - View the full discussion
Now everything works nice, I can now chancing the Layout, but watt is wrong!!
Geert,
Please update the website with the changes to the menubar and then tell me what changes you wish to make to the layout.
If you are having a problem expressing your views in English, you can PM me in het Nederlands.
Gramps
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/3948627#3948627
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/3948627#3948627. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Spry Framework for Ajax by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746. -
I'm trying to load a student version of Acrobat XI Pro but not sure how to get the serial number to validate I'm a student
Hi ,
Could you please tell me form where did you purchase the Student version of Acrobat ?Is it through Adobe or some outside vendor ?
Is it the first time you are trying to access it ?
If yes ,then you must have received your serial number along with your product .
If not ,then how how did you manage to get your serial number and access Acrobat before ?
Regards
Sukrit Dhingra
Maybe you are looking for
-
How to Change multiple keys on one loop in one track
Several one-to-one lessons fail to reveal how I can change loops key independent of other loops. Example, take a loop and loop it four times in one track, trying to make first loop E, second loop A, third loop B, fourth loop C. Seems when I change on
-
How can I delete my free Netflix account using iTunes
I signed up for a free trial of netflix via apple tv. I was told that you must close your net flix account through Itunes. Can you help
-
Mavericks (Apple OS 10.9) and Photoshop Elements 11 compatibility
Will Apple's new OS 10.9 (Mavericks) be compatible with Photoshop Elements 11. I enquired at Apple and they said that I should need to ask Adobe
-
Hi! I have a simple scene with a BorderPane and an attached onKeyPressed-Action called "actionXYZ". <BorderPane onKeyPressed="#actionXYZ" xmlns:fx="http://javafx.com/fxml"> </BorderPane> The method "actionXYZ" should do something, whenever I press th
-
Why i can not open my i tunes and it just says an unknown error ocurred (-45054)
i need help 3 months ago i updeted my itunes on my mac but after that i couldnt open itunes any more it just says an unknown error ocurred 45054 i have already unistalled and installed i tunes but still same problem please help me thanks