Logs and traces are not reflecting in NWA

I have to check default trace files from NWA. and for this NWA->montiroing->logs and traces->defaualt traces(filter) but it is saying no logs found.
Do I have to activate some setting?not sure of this.Can any one let me know what I have to do to make default traces to be shown in NWA.
Thank you.

First of all I think this might be because you have not logged in as SAP NetWeaver Admininstrator role.
Check SAP Note [1166762|https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=1166762]
Form this note check that you have activated "Default Logger Param" in the Configuration > Miscellaneous area of Risk Analysis and Remediation.
Also you will get few more notes at SAP if you want to activate specific logs.

Similar Messages

  • NWA logs and trace does not show the content of Default trace

    Hi All,
    The content which i see in /usr/sap/SID/DV*/j2ee/cluster/server0/log/default trace
    i am unable to see the same in default trace in NWA logs and traces,
    It is a 7.0 system..
    Coudl you please suggest.
    Rgds
    S

    Hello,
    Is it newly built system? Please compare log and trace levels with other java systems in your landscape.
    You can give a try as following..
           1.      Goto NWA and click on Log Configurator service.
           2.      Switch to advanced mode.
           3.      Select the Location tab page.
           4.      Choose the location of default.trc file.
           5.      Save the configuration
           6.      Restart JAVA and see.
    Thanks,
    Siva Kumar
    Edited by: Siva Kumar Arivinti on Jan 12, 2012 3:36 PM

  • Problem in building and changes are not reflecting

    Hi Team,
    When I am building my DC, It is building without any errors,
    But it is not showing anything like build failed yes or no.
    I feel Its not building my DC,bcoz in tasks its not showing my DC name.
    When I deploy, It is deploying without any errors, but my changes are not effecting.
    What could be the problem ?
    Thanks in advance.
    Regards,
    Naresh

    Hi Ayyapparaj,
    Thank you very much for your reply.
    I have reverted the activity i have created for the DC, and deleted the activity.
    I have deleted that DC from my NWDS also.
    Now I have created the project again, with new activity.
    And made the changes, build and deploy.
    But still the changes are not effected.
    When I build my DC, It is not showing any errors in tasks,
    but My DC name is not there in tasks.
    I feel my Dc is not building at all.
    If some other user is created any activity on same DC but not checked in, then will create this kind of problem ??
    I am not sure , where it is going wrong?
    Its not showing like build failed---NO.
    Its not showing any errors also.
    Build is happening within 2 seconds.
    Can you please sort it out..??
    Thanks in advance.
    Regards,
    Naresh

  • Net amount and taxes are not reflected in net value and taxes tab in sale

    hi
    While i am generating sale order that time system calculated all condition like price E.D cess E-cess Lst  but it is not reflected in net value and tax tab.The value comes in net is quantity value.
    Pl Give me Solution on that...
    Thanks & Regards
    sachin

    in header item level when i am putting my condition that time system calculate each and every condition but not reflected in tab net value tab. Insist of net value only quantity is coming in that tab......
    Thanks
    sachin

  • Purchase info record and Contract are not reflected in SC

    Hi...
       while i am creating a shopping cart in SRM for a particular product... i am not able to find the Purchase info record or Contract in SC - Source of supply tab...
    I maintained the Purchase info record and Contract for the particular material in Backend(4.7n).
    Plz throw some lights on this...
    thx....

    Hi
    if you are using classic scenario it might have dispalyed in SOS.
    check info records/contracts  are existed in backend for your product in srm?
    is your cart is special request(describe requirement ) or internal goods and services?
    if you are in ecs mode. it is not possible to see your inforecord/ backend contract in srm sos window
    regards
    muthu

  • Changes are not reflected in ODS

    Hi all
    Can anyone help me with this!!!!!!!!
    There is an ODS1 which gets data from transparent table. From ODS2 data is loaded into transparent table. Then the data is deleted from ODS1 and ODS2.
    Again the data is reloaded into ODS2 and then into ODS1.
    The changes are reflected in the ODS2 and changes are not reflected in ODS1
    Even after refreshing also changes are not reflected in the ODS1.
    what could be done??????
    Thanks
    Rani

    Hi rani,
    U need to check whether the changes are reflected in the transparent table once you reload it from DSO2.
    The reason might be, the key of the table might be different hence it might be adding records instead of overwriting or updating it. If there is any code used, check the logic whether u are appending or modifying the contents of the table. generally it should be modifying the contents.
    Hope this help
    Regds,
    Shashank

  • NWA - Logs and Traces Not available

    Hello All,
    I am unable to view the logs and Traces , When I am accessing it through NWA
    for example http:
    <server>:<port>\nwa ...... In Monitoring --> Logs and Traces --> when I select Default Trace , Its asks me for the setting up the data source , We select the data source and click on Apply . But the view still persists. On the server level, We can see the trace files. But on the NWA I am unable to.
    Can share some thoughts on this as for the reason and the resolution for the same . So that I can view the traces in NWA.
    Regards,
    Ronniee.

    Dear Ronniee
    It will come like that way. If you do not want to show then collapse the tray (Right side Rectange box)
    Once you open the Default Trance > Click on "Open Search" and here you can search with any options.
    OR you can directly access with URL /irj/servlet/prt/portal/prtroot/com.sap.portal.runtime.admin.logviewer.default it will only work if you login and then change the url as metioned above. You can search with FIRST Search option, it will check the all the available logs. You can metion "last day(s)" for searching latest result log.
    Hope it will helps
    Best Regards
    Arun Jaiswal

  • Unable to view logs and traces via NWA

    under netweaver administartion I am unable to see logs and traces .when click on the monitor and logs&traces getting the error : "cannot start plug-in".
    Path : NWA>monitoring>logs and traces.
    Please help me .

    Gopal's instructions are fairly clear about the post install steps. Log on to NWA and use the "Deploy and change"  option in the NWA TLN. You will now see a list of tasks organized by template and scenario. One of these under scenario NWA is configure NWA.
    (This is EP7, right?)
    (and I am impressed that he wants you to "avoid points if useful"!)

  • Logs and traces in NWA

    Hello,
    I have a question about Logs and Traces in Netweaver (7.0) Administrator. When I choose predefined view Default Trace, only messages from closed defaultTrace.[number].trc files are showed for example I don't see (and cannot find) any messages that are in defaultTrace.7.trc (which size is less than max 10240) but it works well for previous files.
    Regards, Jacek

    First of all I think this might be because you have not logged in as SAP NetWeaver Admininstrator role.
    Check SAP Note [1166762|https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=1166762]
    Form this note check that you have activated "Default Logger Param" in the Configuration > Miscellaneous area of Risk Analysis and Remediation.
    Also you will get few more notes at SAP if you want to activate specific logs.

  • I receive an error stating user name and password are not valid on my ipad and iphone 3Gs when attempting to load email from my icloud account. When I log onto icloud from my Mac, it wont load the email either.

    One day, my ipad and iphone pick up my emails (.mac account) from icloud just fine. the next day, I recieved error messages that say my user name and password are not accurate. I removed the icloud program on both devices and added it back on to both devices and get the same message. I logged into icloud from my Mac and while I can log in, it times out when I select email and wont load the email there either. Any Suggestons?

    I am having the same problem; it started about 24-36 hours ago.
    I know my ID/PW combo are correct because I can access all other aspects of iCloud except mail.
    iPhone -- returns incorrect ID / Password
    iPad -- Same
    Mail.app on Mac -- returns incorrect password error
    icloud.com -- allows me to log in and use all functions accept mail.  When I try to use mail it stays on a white screen for about 60 seconds then returns a dialogue box that indicates a server error.
    I contacted Apple and they placed my iCloud account into something called "Troubleshooting" mode.  They generated a new strong password and sent it on to "Engineering."
    I suspect there are a small number ofo users like you who are affected with the same problem I am.  Too small a number for it to be reported as an outtage.  I suggest you call Apple and open a case to have your mail investigaged.
    Hope this helps...

  • TS3048 turned off my desktop mac, now both my mouse and keyboard are not connected. i am not logged in yet as well, dont know what to do ?

    turned off my desktop mac, now both my mouse and keyboard are not connected. i am not logged in yet as well, dont know what to do ?

    Try resetting the SMC (no peripherals required).
    Barry

  • Changes are not reflected after editing and saving the chart in th WAD 3.5

    Hi all,
    I have to display the chart in the report using WAD 3.5. But after creating a chart and then when ihave to make extra changes again and save the same, the changes are not reflected. I can see only the previous changes.
    I am working on the chart for the first time. please let me know about the problem. My changes to the chart are not getting reflected.
    Please help.
    Thanks
    Rani

    How r u changing the graph??
    Hope you are doing a right click and selecting Edit Chart. Click on Refine.
    Then Click on Next till you get the button Complete. After you click on Complete, you save the Template.
    Hope you are following these steps.

  • Changes made to cell reference and cell formula in designer are not reflected in analyser?

    Dear Experts,
    I have made few changes to Bex Report in Query designer by creating cell reference for a cell and the same cell reference used by the formula created on the adjacent cell.
    I changes are working for 1 Report where as , the exact chanegs made in 2nd Report are not reflected in the Analyzer upon execution of Reports by giving exact inputs as fpr the previous report.
    Could you please help me resolve this issue ?

    Hi Loed,
    Please find  the screenshot of the query result below.
    The cells marked in green are where the cell reference has been created and the ones in yellow will have the formula pointing to the cell reference value.Ideally, the cell values in green and corresponding green cell should be identical(as seen in the 2nd screenshot).
    Screenshot1.
    screenhot2

  • Export and Import are not supported on 10g databases for users logged

    Hi
    I having the below written error, when i want to export or import my database. I having Standalone system using windows xp.
    Role Error - Export and Import are not supported on 10g databases for users logged in with the SYSDBA role. Logout and login using a different role before trying again.

    Actually i ma new to EM...
    When I want to Import any thing He is asking abt the HOST CREDENTIALS
    I can't undrstatnd wht he is asking????
    Host Credentials
    * Username          
    * Password          
              Save as Preferred Credential
    It Genrate the below error
    Error - ERROR: Wrong password for user

  • Logs and Traces - low performance

    Hi,
    I encounter a serious problem with application Logs and Traces in NWA. In that application we deal with predefined and custom views . The predefined views work perfectly, but when I run a custom view, it takes over 3min. to get any result. I can hardly imagine that there is nothing left to do.
    Has anyone encountered the same issue? Did you solve it?
    Thanks very much,
    Wesley

    Hi Denis,
    The tables mentioned above only log "technical" details of the logs and will not be helpful for your requirement.  The best way to view the device logs is via the Device Logs Monitoring.  It provides advanced search facility for the devices, whose logs you are interested in.  Additionally, once you have got the list of devices based on your search criteria, for a selected device, it is possible to filter out the logs for that device through the "Additional Logs Filter" button where you could filter based on the severity, time range and even by the user (client user) who was logged in the client when these log records were being logged.
    Hope this helps.
    Best Regards,
    Kranti

Maybe you are looking for