Logs filled up circular logging not working

hey. i have exchange 2010 with dag and logs filled up and shut down database. i remove some logs according to old date then i turn on circular logging. But still not logs shrinking but only growing. i move more logs now. how come
circular loggins not work? i dismount and remount already. thank you in advace.
EC David

EC,
Do you have time to just run a full backup?
The reason why the circular logging is not working is because you need to break the DAG. Dismount the passive copy, remove the copy then dismount the active. Once you remount the circular logging should work. Once that is done you Or you
can just run a full backup if you have the time to let the logs truncate from that. Either way you will have to run a backup. Actually, why don't you just run a full backup?
Oh, if you go that route, don't forget to reseed the database. I hope you can just do a full backup.
S

Similar Messages

1. TACAS+ Accounting and Logged in Users report is not working on ACS 4.1(1

Hi,
I am facing problem with ACS 4.1 accounting, TACAS+ Accounting and Logged in Users report are not working, the csv file is been generated but nothing is showened in the file.
I have checked the documents related to ACS 4.1, it says that there is a bug related to command accounting âCSCsg97429 - TACACS+ Command Accounting does not work in ACS 4.1(1) Build 23â.
Tried upgrading the same with the patch applAcs-4.1.1.23.3.zip, still it is not working.
Other reports are working fine.
1. TACAS+ Accounting - not working
2. Logged in Users - not working
3. TACAS+ Administration - working
4. Passed Authentication - working
5. Failed Attempts - working
Any suggestions or any idea, please revert.
Regards
Vineet

Hi,
Thanks
Yes I have configured the command âaaa accounting exec default start-stop group tacacs+â
As I have mentioned all the other reports are working. Which user and when he has logged in and what commands he has used. Only the TACAS+ Accounting and logned user is not working.
Regards,
Vineet

HT5622 valid apple id but not icloud account. I tried downloading on a different computer and logging in and it did not work. I have restarted my computer several times. I have changed my password several times. I have tried to access the icloud page.

repeating error message reads: "valid apple id but not icloud account." when trying to start my icloud account. I tried downloading on a different computer and logging in and it did not work. I have restarted my computer several times. I have changed my password several times. I have tried to access the icloud page. Nothing has worked. Now I have this stupid app and some of my music is still not being shared on both of my computers.

I have the same problem signing in...but, I finally got a screen saying you have to set up a account on a device..like an ipad to get a iCloud sign in ...my apple id is [email protected] and this screen reset to [email protected]
If you don't have an apple device you may be out of luck. I don't know. I'm still waiting for help just as you are...good luck to both of us though.

TS3988 Each time I log into iCloud, I check, Keep me logged in, but this does not work. I have to reenter user name etc each time I try to go back to my iCloud account.

Each time I log into iCloud, I check, Keep me logged in, but this does not work. I have to reenter user name and password etc each time I try to go back to my iCloud account.

Hi,
In Keychain Access app in the Menu for the App is Keychain First Aid.
If you open this is the tick box for Synchronising the Login password with the so called Login Keychain ticked ?
9:49 pm Monday; March 16, 2015
 iMac 2.5Ghz i5 2011 (Mavericks 10.9)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad

Passwords, auto-fill in safari does not work it is enabled in settings, what can do

passwords, auto-fill in safari does not work it is enabled in settings, what can do

Private Browsing Off.
Private Browsing On.

Circular guides not working with Curvature Tool

I am using the latest Illustrator CC Oct 2014 (OSx Yosemite) and Circular guides not working with Curvature Tool.
any solutions to this problem?
Thank You
TS

Mohit
Not the answer I was expecting, but thank you for the answer.
Is this lack of support for guides in the Max curvature tool documented anywhere?
Thanks agian
TS

PCL4 TABLE LOG FOR INFOTYPE 2001 IS NOT WORKING IN QUA 070 CLIENT

Heloo,
Could some one let me know the ways to capture the log of infotype 2001.
I have used PCL4 table to capture all the changes made to INFTY 2001.
This is working fine in DEV 070.
But not working in QUA 070.
Could someone let me know what is the problem and the solution.
Thanks a lot for your efforts.

Hi Lata!
I created the absences (T554S):
Ps grouping, Absence type text
04,0100 VACATION WORKIN DAYS (quota working fine)
34,0100 VACATION NATURAL DAYS
When I check your steps I have this information
1. Absence type screen no. should be 2001.
I have checked in table T554S.
Screen number quota working fine: 2001
Screen number quota working bad: 2001
2. Quota deduction should be selected in V_554S_Q table
Check quota deduction quota working fine: is checked
Check quota deduction quota working bad: is checked
3. Check that in counting rule you have assigned correct deduction rule.
Counting rule for quota working fine: is 010
Counting rule for quota working bad: is 030
The counting rule 030 is created for me, maybe this is the problem is a similar copy of the rule 010. It has different conditions because in Psgroup "04" the vacations are working days but in group "34" the vacations are natural days.
4. In deduction rule check whether correct quota no. you have maintained.
In deduction rule working fine the absence quota type is 10, standar leave, days
In deduction rule working bad the absence quota type is 30, ,days
I've checked the absence quota type and are similars:
In 10 absence quota type
ESG Time quota types: 1
PS Grpg tm Quota Typ: 01
Absence quota type: 10
Time/measurement unit: Days
Time constraint class: 02
In 30 absence quota type:
ESG Time quota types: 3
PS Grpg tm Quota Typ: 02
Absence quota type: 30
Time/measurement unit: Days
Time constraint class: 02
What's wrong?
Kind regards,
Julian

Specifying log file as jvm argument not working

I've long used the java.util.logging by having a logging.properties file and specifying the "java.util.logging.FileHandler.pattern" in that file and specifying the location of the logging.properties as a jmv arg (-Djava.util.logging.config.file=logging.properties). No issues with that.
I now, however, want to override the file pattern by using a jvm arg (-Djava.util.logging.FileHandler.pattern=somename.log), but when I do that, I get no file log output. If I leave it specified in the logging.properties it uses the value there and NOT the jvm arg value. If I comment it out of the logging.properties file is uses nothing (no file output).
I see (via Google) others using this parameter, but I am having no luck.
All in latest JDK release (6u11).
Can't find any documentation on doing this on Sun's site (it might be there, but I haven't been able to find it). Don't see posts of others having this problem. I've got the same results on linux and OSX, different releases and all.
Thanks for any insight in advance!

This is easy to do! Remember you can write things like
... ${user.home}...In your config file. So write something like:
log4j.rootLogger=debug, R
log4j.appender.R=org.apache.log4j.DailyRollingFileAppender
log4j.appender.R.File=${my.file}Then launch your app with:
java ... -Dmy.file=goomba.txt ...

IChat (version 3.1) continue to log off AIM - typical fix not working!

I've noticed that others have this problem as well, and the common suggestion for fixing the issue is the following:
First off, try changing the log-in port:
1 Log out of AIM (in iChat menu), then
2 iChat > preferences > accounts > server settings
3 Change 5190 to 443
4 Log back into AIM
This isn't fixing the problem... Any other ideas?
Thanks!

Usually happens when I'm not using the app (minimized or simly not chatting).
Currently using a Motorola modem and a Linksys wireless router (leftover from PC days). Never had this kind of problem with AIM on my PC, so it's kind of weird.
In fact, even though I was online with iChat earlier, my wife (on her PC) said that it showed I hadn't been online for a couple of hours or so...
Any ideas?
Thanks!

Color Swatches in Toolbar for Fill and Stroke are not working properly.

The color swatches in toolbar for fill and stroke are not functioning as they should. When I select an object on the artboard, the swatches display fine in the toolbar for what they should be. However, when I double-click on those swatches from within the toolbar to modify the color, the color which comes up is #000000 instead of the actual color it should be.
I am using 16.2.1 (cloud) for Mac OS 10.8.2
I've submitted a bug report, but want to know if anyone else has had this issue and what they did to resolve the issue.
Also, the eyedropper tool is buggy and occasionally places the #000000 into an object instead of the characteristics the eyedropper is selecting. I don't have any hidden layers or weird groupings, it just randomly decides when it is going to work or not.
I've never had these issues on previous versions of illustrator and have been proficient in all versions since 2007.

Double click the eyedropper, and turn on appearance, is off by default.
For your #000000 color problem that also likely is related to appearance setting. You may have for example have some with #000000 at the character level, and another color at the type level.

Fit to Fill: First time trying, not working

Am working through Weynand's Apple Training Series book for FCP HD (4.5), and stumped on p. 610-611; first time using "Fit to Fill" but not working - neither the section in the Edit Overlay, the green edit button in the Canvas, nor the Shift-F11 (which makes all the screens disperse). I get this prompt: "Edit operation had no effect. Check the target tracks. You may need to open the Source clip into the viewer [already done] in order to see all the target tracks." Something in my settings? Thanks in advance.

Resolved. I had to connect the Source and Destination buttons. There hadn't been a reminder in the textbook.

Secure Zone password set (send log in details email) link not working for everyone

Hi Guys,
I have a site with three secure zones for different online programs. We're beginning to sell some programs and, because we aren't using a seemless gateway, we are manually subscribing them to the secure zones then clicking the 'Send log in details email' button. The email seems to be going out which is good. But, some clients can't click on the link to set their password. Nothing happens. Even if they copy and paste the link text into a browser window, still nothing.
Anybody know why this would be working for some people and not others. Could it be to do with cookies or email clients etc. We are at a loss and therefore have lost two sales so far (they asked for refunds) because they couldn't access their programs in the secure zone.
Any help greatly appreciated.

Thanks LiamDilley for such a prompt reply. Currently my code looks like this:
...and your password is [{tag_password}]
Are you saying that I should be changing the '[{tag_password}]' to:
[,a href="{tag_password}>{tag_password}</a>]
The thing is, most of the time the link text appears as a link, but not for everyone. Do you think this will fix it?

Ms-exchange 2013 audit logs retrieving in csv format not working?

I need help regarding pulling specific information from exchange 2013. The information pertains to mail-exchange audit logs. The exchange in my environment is ms-exchange 2013. Steps performed so far are:-
**step#1**
Create test Environment on Exchange Server 2010 and Active Directory:
Two Mailboxes for testing (with dummy email messages) (i.e., test-mailbox-1, test-mailbox-2)
Two Active Directory Accounts for testing (testAcct01, testAcct02)
Assign Permission to Test Mailboxes: Owner of Email Box test-mailbox-1: testAcct01, Owner of Email Box test-mailbox-2: testAcct02
**step 2**
Enable Mailbox Auditing on the test-mailbox-1:
Use EMS to enable mailbox auditing on mailbox: test-mailbox-1
Commands:
o Set-Mailbox -Identity "test-mailbox-1" -AuditDelegate Copy,Create,FolderBind,HardDelete,Move,MoveToDeletedItems,SendAs,SendOnBehalf,SoftDelete,Update -AuditEnabled $true
o Set-Mailbox -Identity "test-mailbox-1" -AuditAdmin Copy,Create,FolderBind,HardDelete,MessageBind,Move,MoveToDeletedItems,SendAs,SendOnBehalf,SoftDelete,Update -AuditEnabled $true
Note: You must have permission for Organization Management and Record Management if you want to enable mailbox auditing.
**step#3**
Verify that the Mailbox Auditing is Successfully enabled for mailbox: test-mailbox-1:
 Use EMS to verify the settings of mailbox auditing
Command:
o Get-Mailbox "test-mailbox-1" | Format-List *audit*
**step#4**
Verify that the Mailbox Auditing is Successfully enabled for mailbox: test-mailbox-1:
Use EMS to verify the settings of mailbox auditing
Command:
o Get-Mailbox "test-mailbox-1" | Format-List *audit*
**step#5**
Perform test activities on mailbox “test-mailbox-1” using account id: testAcct02
For Example: Access Inbox folder, move items from one folder to another folder, delete items, read messages, send email using SendAs and SendOnBehalf, create new folder, copy email items etc.
**step#6**
Perform test activities on mailbox “test-mailbox-1” using “Administrator” Account.
For Example: Access Inbox folder, move items from one folder to another folder, delete items, read messages, send email using SendAs and SendOnBehalf, create new folder, copy email items etc.
**step#7**
Use EMS Cmdlet to retrieve Mailbox audit logs for mailbox “test-mailbox-1”
Command:
o Search-MailboxAuditLog -Identity test-mailbox-1 -LogonTypes Admin,Delegate –ShowDetails -StartDate mm/dd/2014 -EndDate mm/dd/2014 | Export-Csv “c:\test-Audit-Results.csv”
o New-MailboxAuditLogSearch "Admin and Delegate Access" -Mailboxes " test-mailbox-1" -LogonTypes Admin,Delegate -StartDate mm/dd/2014 -EndDate mm/dd/2014 -StatusMailRecipients [email protected]
I'm unable to go past step#7, as I see nothing in csv file. I don't know why is this? any help.

Hi,
I will perform these steps in my lab and paste the result.
Beg your patient waiting.
Thanks
Mavis
Mavis Huang
TechNet Community Support

Websites on Firefox: For some reason the top line of every website (including Log-in) is inactive, does not work!

An example: On the current page, clicking (single or double click) on items in the page heading produce no result.
This has been noted on my e-mail accounts with Yahoo.co.uk, Postmaster.co.uk and gmail.com, Barclays bank and other business and commercial sites. The main problem is caused by the inability to sign/log in.

HI Bev,
*"I've tried safari, firefox and camino and it's the same for all of them."*
Since this is happening on all of your browsers I'm inclined to think it's the Parental Controls causing the glitch. Can you disable Parental Contols and see if the problem persists?
Keep in mind you can only enable and disable Parental Control's from your admin account.
Also, try repairing disk permissions and see if that helps...
Quit any open applications/programs. Launch Disk Utility. (Applications/Utilities) Select MacintoshHD in the panel on the left, select the FirstAid tab. Click: Repair Disk Permissions. When it's finished from the Menu Bar, Quit Disk Utility and restart your Mac. If you see a long list of "messages" in the permissions window, it's ok. That can be ignored. As long as you see, "Permissions Repair Complete" when it's finished... you're done. Quit Disk Utility and restart your Mac.
Open System Preferences/Accounts. Click the gold padlock bottom left side of the window. You will be prompted for your admin password. Now select your personal account in the panel on the left. Now, make sure the box next to: Allow user to administer this computer is checked. Quit System Preferences and restart your Mac. Try internet access ...
One other thing. I noticed in your profile you are running 10.5.6. You need to be up to 10.5.8.
You can download and install the 10.5.8 combo update available here.
http://support.apple.com/downloads/MacOS_X_10_5_8_ComboUpdate
Carolyn

I have an iMac and the latest Firefox; however, I *can't* get auto-fill to work...I do a lot of repetitive data entry and auto-fill/auto-complete IS NOT WORKING

I downloaded the auto-fill app for firefox (latest version) and have the latest firefox version, yet none of the autofill works whenever i do it once.
i've even restarted firefox, shut down my iMac for a while, started firefox up again, nothing.
i do A LOT of repetitive data entry and this is getting frustrating for me to work from home.
help, please! *thanks in advance!*

We apologize that you are experiencing issues with some Firefox feature.
When typing in a text field, does is drop-down list appear when typing?
If not, please '''try Firefox Safe Mode''' to see if the problem goes away. Safe Mode is a troubleshooting mode, which disables most add-ons.
''(If you're not using it, switch to the Default theme.)''
* On Windows you can open Firefox 4.0+ in Safe Mode by holding the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* On Mac you can open Firefox 4.0+ in Safe Mode by holding the '''option''' key while starting Firefox.
* On Linux you can open Firefox 4.0+ in Safe Mode by quitting Firefox and then going to your Terminal and running: firefox -safe-mode (you may need to specify the Firefox installation path e.g. /usr/lib/firefox)
* Or open the Help menu and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
[[Image:FirefoxSafeMode|width=520]]
''Once you get the pop-up, just select "'Start in Safe Mode"''
[[Image:Safe Mode Fx 15 - Win]]
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshooting extensions and themes]] article for that.
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.''
Thank you.

Logs filled up circular logging not working

Similar Messages

Maybe you are looking for