Logs for setup of statistical data
Dear Friends,
I am Performing Setup - SD Sales Orders i.e filling up of set up tables for 2LIS_11_VAITM, using t-code OLI7BW.
After I fill up the required feilds and execute the same I get a message "DataSource 2LIS11_VAHDR contains data still to be transferred Message no. MCEX024"_.
I used t-code NPRT where the list of logs are displayed, including my current log.
I understand that unless all the previous logs are deleted or transferred my setup table will not be filled up.
How do I carry out the necessary steps so to complete the transaction?
Yours Truly
KS
Hello,
Do the following:
1. Run V3 job and run loads in BW. Repeat this process 2 to 3 times.
2. Delete setup tables.
3. Delete queue in SMQ1 and RSA7.
And now you can try.
Regards,
Shashank
Similar Messages
-
Error: while configuring logs for changes in infotype data
Hi All,
I am configuring the following Tables for maintain logs for changes in infotype data.
V_T585A, V_T585B and V_T585C
While configuring V_T585B, when i input * in 'field name' column it gives me an warning message " All data fields in **** infotype 31 will be deleted.
Please let me know, what does this warning message means?
Also, How is the report RPUAUD00 read?
Regards
SimranHi Simran,
you are not suppose to give the IT 0031-Reference Personnel Numbers in these tables. why because this will done at the time of Employee hiring only and we don't change this. if you change you will lost the old data in the IT.
Normally we assign only the IT which we change frequently for the master data. example like 0 1 2 7 8 9 27 582 - 589 2001 2006.
if you are configuring today means from today on-wards any changes had made to these IT's you can see in the report. before changes will not be seen. in the report you have to choose either long-term document / short-term document and remaining fields as per the requirement.
Regards,
Praneeth kumar -
Dump EXPORT_TABLE_UPDATE_CONFLICT occurred during setup of statistical data
Hi Experts,
I scheduled the run of statistical data setup for SD-Sales Orders.
But the following Dump screen has occurred:
Runtime Errors EXPORT_TABLE_UPDATE_CONFLICT
Date and Time 09.09.2011 10:03:09
ShrtText
Problems found during the EXPORT to specified key in table.
What happened?
Error in ABAP application program.
The current ABAP program "SAPLMCEX" had to be terminated because one of the
statements could not be executed.
This is probably due to an error in the ABAP program.
Error analysis
The table "MC11VA0SCLSETUP " does not contain any data records with the
specified key.
The system called the internal SAP database interface because it
expected to find such a key.
Any idea or suggestion please?
before this run, i ran setup for SD-Billing Doc, it has completed successfully without errors.
Any help is greatly appreciated.RMCSBWCC returned:
Struct. appl. 11 cannot be changed due to setup table -> Long text
Message no. MCEX141
Diagnosis
Changing the extract structure MC11VA0SCL for application 11 is not permitted, because the restructure table MC11VA0SCLSETUP for the extractor still contains data in 300.
You cannot change the structure in this status, because when you load an InfoPackage from BW, this leads to errors.
Procedure
Delete the entries for all restructure tables for application 11.
I could not find RMCEXCHK under SE38 -
Log for setup for statistical data (NPRT)
What does the number of records which is shown when you view an NPRT entry represent, is this the actual number of records being extracted or is it LUW or otherwise? Thanks
Hi ,
NPRT which gives log details of setup table,it means who has run setup table,how many records has added & how much time taken for filling setuptable.
LUW which gives delta records. -
How can I perform data logging for a specific time??
hello everyone,
I am quite new in labview and I have a basic question regarding data logging. Currently I am using a cRIO9074 and doing some data logging for my test. The data logging it self works ok so far.
But my problem is I would like to write my datas in a text file either for a specific time interval (ex)10 seconds) or for a specific amounts of data (ex)500 Samples). Can anyone give me some help regarding my problem?? Attached you can find my RT.vi
I would appreciate for anyhelp!
Regards
Yun
Attachments:
BP250 Encoder Position & Velocity (Host).vi 92 KBRun your loggging program for that time. When your program terminates then it will write all the logged data so far in text file.
Kudos are always welcome if you got solution to some extent.
I need my difficulties because they are necessary to enjoy my success.
--Ranjeet -
How do I retrieve call history from my iPhone 4S? It only seems to log for about a month and I need an earlier date?
If you have backup of your files, you can get your call history back as long as you sync iPhone with iTunes frequently.
OK, the first thing you are required to do is close the function of "prevent iPhone from syncing automatically." in iTunes, avoiding to sync iPhone again.
Now, connect your iPhone to pc and open iTunes.
iTunes> preferences> devices
All the backup data in iTunes will be displayed.
Then,click the File menu and select Devices > Restore from Back up
your iPhone will restart and you can find them back.
This method only can find back the latest history, to get back the old, you should turn to a third party program for help. -
Change Logs for customer master data in 3.1 H version
Hello All
Are they any existing reports or change logs for viewing changes to customer master data in 3.1h version. I want to be able to report based on changes made to customer master.
I know there is a good report in 6.0 version for this- S_ALR_87012182.
If I have to develop a custom program for this in 3.1h. Which table I should use? KNA1 or CDPOS.
Any ideas will be appreciated.
Hema.Hi,
Please check the filter settings maintained for the adapter object CUSTOMER in R3AC1. The same filter settings can be referred in tables Table: CRMFILTAB (R/3) and SMOFFILTAB(CRM) as per srinivas's reply.
Check the sales area of the customer maintained (Sales Area, Division, Distribution Channel etc.) and see if the current filter settings are restricting the customer from getting replicated in CRM. If everything is maintained fine then check for any failure Bdocs in SMW01 or SMW02.
Regards,
K -
Hi,
I have the subreport calling from the main report. The subreport is based on MDX query agianst the SSAS cube. some dimensions in cube has values 0 and 1.
when I try to pass '0' to the sub report as the parameter value, it gives an error "Data Retrieval failed for the report, please check the log for more details".
Actually I am using table for storing these parameter values. In the main report I am calling this table (dataset) and passing these values to subreport.
so I have given like [0],[1] and this works fine. when I give only either [0] or [1] then it is throwing an error.
Could you please advise on this.
Appreciate all and any help.
Thanks,
DivyaHi Divya,
Based on the current description, I understand that there is no issue if you pass two values from main report to subreport, while the issue occurs when passing one value to subreport.
To narrow down the issue, I want to confirm whether the subreport can run if there is only [0] or [1] in the subreport. If so, it indicates the query statements exist error in the subreport. If it’s not the case, this shows the issue occurs during passing
values from main report to subreport. To make further analysis, please post the details of query statements of the subreport to the forum.
Regards,
Heidi Duan
Heidi Duan
TechNet Community Support -
Hi,
I have SCSM with remote SQL and the SCSM Management server give below error
Message: Failed to connect to server ‘Name of Server’
Microsoft.EnterpriseManagement.Common.ServiceNotRunningException: The Data Access service is either not running or not yet initialized. Check the event log for more information. —> System.ServiceModel.EndpointNotFoundException: Could not connect to net.tcp://ServerName:5724/DispatcherService.
The connection attempt lasted for a time span of 00:00:04.0070932. TCP error code 10061: No connection could be made because the target machine actively refused it IPAddress:5724. —> System.Net.Sockets.SocketException: No connection could be made
because the target machine actively refused it IPAddress:5724
I had try to restart SQL & MS with same error,
Also i had try the following
https://social.technet.microsoft.com/Forums/systemcenter/en-US/c670d54d-3a92-481f-8dc9-55c475ad196f/problems-with-data-access-service-after-rebooting
https://social.technet.microsoft.com/Forums/systemcenter/en-US/26dc1d5c-fa82-403f-8949-3073f3b82a60/the-data-access-service-is-either-not-running-or-not-yet-initialized
Not help meRegardsI had same error before
below steps to solve it
Make sure SQL Server Running & ServiceManager Database not full
Stop All SCSM Services,
System Center Management Configuration
Microsoft System Center Data Access Service.
Microsoft Monitoring Agent
Rename Health Service State to Health Service State_old --- @ "C:\Program Files\Microsoft System Center 2012 R2\Service Manager"
Start SCSM Services
Microsoft Monitoring Agent
System Center Management Configuration
Microsoft System Center Data Access Service.
Wait 2 min...
check Event Viewer...
hope this help you.
Regards, Ibrahim Hamdy -
The data form form name is invalid. Check log for details
Hi all,
i have just built a planning application from scratch and created my first form.
i have encountered the error "The data form <form name> is invalid. Check log for details "
and i have checked the log file.
It reads as follows
Unknown calculation type [0] during the dynamic calculation. Only default agg/formula/time balance operations are handled.
An error [1012703] occurred in Spreadsheet Extractor.
Spreadsheet Extractor Elapsed Time : [0] seconds
Spreadsheet Extractor Big Block Allocs -- Dyn.Calc.Cache : [0] non-Dyn.Calc.Cache : [0]
Transaction [ 0x60001( 0x4d8030e5.0xa0280 ) ] aborted due to status [1012703].
User [admin] set active on database [Plan1]
Can any one suggest me how to handle this.
Thanks in advanceuser9192499 wrote:
Hi all,
i have just built a planning application from scratch and created my first form.
i have encountered the error "The data form <form name> is invalid. Check log for details "
and i have checked the log file.
It reads as follows
Unknown calculation type [0] during the dynamic calculation. Only default agg/formula/time balance operations are handled.
An error [1012703] occurred in Spreadsheet Extractor.
Spreadsheet Extractor Elapsed Time : [0] seconds
Spreadsheet Extractor Big Block Allocs -- Dyn.Calc.Cache : [0] non-Dyn.Calc.Cache : [0]
Transaction [ 0x60001( 0x4d8030e5.0xa0280 ) ] aborted due to status [1012703].
User [admin] set active on database [Plan1]
Can any one suggest me how to handle this.
Thanks in advance
ERROR 1012703
*"Unknown calculation type [0] during the dynamic calculation. Only default agg/formula/time balance operations are handled."*
There is an error in a formula(s), therefore, no calculations will work. The problem is that when you have the outline open in Edit mode and you try to 'Validate', it does not identify any of these errors, nor does it write it to a log. However, you can go one by one and validate each formula. So any time you delete a member or modify a member name, be sure that this member is not included in any formula.
Regards,
Prabhas -
Chnage log for classisication data of material
Hi All,
From last two day's i have trapped with this problem.
We have requirement where we have to send IDOC to our EDI partners for any change in material master data and calssification data of material.
We will run a batch say every day which will chech for these changes and if there are any changes then it will send IDOCs for these materials.
Now, problem is we are able to track changes in material master through tables CDHDR,CDPOS. But we are not able to find out change log for classification data of material.So, our basic problem is to identifiy change in classification data of material.
Now my question to all guru's is:
Is there any way to track these changes or table which record that changes?
NOte: One thing i want to tell, If you go to MM02 transaction, gove material no. and select basic data1, basic data2, calssification data.Then on output screen there is Blue info button, if you press that button it will give you last change info...from where it is comimng?
Regards,
RahulHi Rahul,
For that classification data fields
there is no change log option checked in the data element level.
or there is no associated changelog class.
check in <b>SCDO</b> transaction for change log class.
Regards
vijay -
I am using Win XP Pro SP3. I have CS3 installed, and successfully installed Dreamweaver, Fireworks and Flash from CS4 Design Premium. Then I successfully uninstalled DW, FW and FL CS3.
When I tried to open a SWF in Illustrator it failed to open, and then I tried to create a really simple SWF (a rectangle) by exporting from Illustrator and tried to open that and it also failed. Whenever I tried to open or place ANY SWF into Illustrator I get a "file *** is in an unknown format and cannot be opened" error.
I decided there must be a corrupt file, maybe the upgrade must have affected some Illustrator files, so I tried to repair the CS3 installation. After over 2 hours of INTENSE FRUSTRATION having to constantly switch CS3 and CS4 disks many MANY times, the installation failed, listing "common files" that were missing from non-existent folders such as "C:\Documents and Settings\[username]\Desktop\Adobe CS4\Fireworks CS4\payloads\etc
When I tried to repair the CS4 installation after loading all the profile settings it errors before the installation window comes up, with "Critical errors were found in setup. Please see the setup log for details". Then it shuts down the installer. I then tried to do a system restore and system restore failed on all restore points!
Please help:
1. Where is "the setup log"?
2. Will creating and populating the folders mentioned in the failed CS3 installation from the CS4 disk allow it to work?
3. How can I uninstall CS4 if I can't even get to the installation window?
4. Has Adobe just DESTROYED MY REGISTRY BEYOND REPAIR!!!???im haveing a huge irritation useing illustrator cs4 live paint bucket because i can use everything else apart from the paint bucket which should be the easyiest tool to use sometimes it works with the white arrow sometimes it doesnt i sometimes get this below message
the selection contains objects that cannot be converted. live paint groups can only contain paths and compound paths. clipping paths are not allowed
the lines which i have drawn are connected which i believe have to be in order to use the paint bucket and i have no clipping paths so i am am baffled
i presume it is because the line is set to 0.01 it seems the live paint bucket wont notice thin lines, but i tried makeing the line thicker so i could use the paint bucket and it still doesnt work. -
Change log for work center data
Hi,
I was looking for the table where the change header document for the work center is stored.I was able to find a transation CR10 which shows the changes and also the database table CDHRD.
When I am trying to view the changes that were made to the work center I find that the data does not exist in the tables.
I was curious to know this as for some transaction the data is being logged in their respective change table but not for Work Center changes.
Can anyone tell me as to why this is happening.
What I think is that some changes to the configuration are required in order to log the changes in the database.
Kindly help.
Regards
VarunHi Wolfgang,
Thanks for the information.
However i have another question.
The change table will have data only when it is activated in the configuration menu.
However is there any other way by which we can capture the previous data for the work center e.g. the changed by field. I want that the names of the users who has changed the wrok center currently and the name of the person who previously made changes to it.
See if you can help me on that.
Regards
Varun -
Critical Errors Were Found in Setup. Please see the Setup Logs for Details
Hello everyone. I have recently gotten Adobe Flash CS4 and i was really happy, until i kept getting the same error whenever i tried to install:
"Critical Errors Were Found in Setup. Please see the Setup Logs for Details"
I do not know what is the cause of the problem, but i have installed Adobe Photoshop CS3 succesfully without any problems. Please do help. I checked the setup logs, but i have no clue what it is saying, and its too long to post here.
Thank you for your time and help.We've all been there with the frustration.
And I'd really like to see you get back up and running. I'm a bit of an insomniac and tend to go back over the day while I'm pretending to sleep, and a couple of new things filtered back into my mind. There have been, I think, some problems reported about conflicts with some scanner drivers, and of course with firewalls, anti-virus programs, and the like. I think iTunes and instant messengers are also on that list.
Make sure you turn off everything non-essential before trying to do your installation (and I'd probably do the same thing before running the scripts again). I do this by running MSConfig on XP and going to the startup tab. I uncheck everything I can't identify as being essential (which means I pretty much only leave the mouse driver checked. You may need to google some of the stuff to find out what it is) and then go to the services tab and hide all Microsoft services. From what's left I again uncheck everything that isn't required to run the system. Bonjour, if you see it, should be left active as it is used by the CS3 installer. Restart the computer.
This should have turned off pretty much everything that could have been conflicting with the installer. Go to windows security center and make sure the windows firewall is also temporarily turned off, if you use it, and you should be ready to go. It can't hurt to try the add/remove programs again, but it probably won't show any adobe products anymore if you've run the scripts correctly (did you also run the MSI cleanup utility?).
After you've finished, you can run MSConfig again and reset to standard startup.
Peter -
The data form is invalid. Please Check log for details.
Hi.
Recently i have migrated an application from scratch onto same datasource where application earlier was hosting on. i have deleted the application and making use of same datasource i have created the application again and migrated the artefacts and imported,refreshed and loaded the data into essbase db, once after the migration am not able to open some data forms and after the essbase restart i am able to some and others are still giving the same error message as earlier "The data form is invalid Please check log for details.".
Could anyone help on this. have gone through different otn answers but unable to reach at point.
Thanks
AmithTry Oracle Support:
Error "1012703 Unknown calculation type [0] during the dynamic calculation. Only default agg/formula/time balance operations are handled" During Calculation (Doc ID 744529.1)
or
Error: "Unknown calculation type [0] during the dynamic calculation. Only default agg/formula/time balance operations are handled." (Doc ID 593227.1)
Cheers
John
http://john-goodwin.blogspot.com/
Maybe you are looking for
-
Bridge doesn't recognize Oly E-620 files with ACR 5.4 Beta
hi: 1. the good news--> ACR 5.4 is working well as well as DNG. 2. problem: when i open up bridge (CS4), the new RAW files (example: olympus E-620) don't show up as thumbnails. i looked around in the preferences, but couldn't see anything tha
-
Multiple parallel approval task
Hi, Can anybody tell me how we can acheive multiple approval in OIM? I have a requirement where I have to send approval task to multiple approvers and based on each approvers response I have to AD group. Currently I have a request where a user can re
-
Why do I periodically have emails that cannot be deleted?
I have a few emails that cannot be deleted and show up with an old date. How can I get rid of them?
-
XPath: doesn't work for SOAP message?
My method * Get value of the node specified by an XPath. * @param item The starting context (e.g. document, node, node list). * @param xPath XPath to select single node value (e.g. "/root/data/value[1]/text()") * @return Result of
-
My New Computer and My External Hard Drive Not Compatible
I just purchased a brand new Dell Inspiron with windows 8. I had a Seagate back up hard drive on my old Dell. I wanted to move some things (especially my pictures) to the new computer from the external hard drive, but when I tried to install, I get