Logshipping: Skipping Log back up file since load delay period has not Expired
Skipping Log back up file since load delay period has not Expired
What does it mean?
Thanks.
Check step 19 in the link
http://msdn.microsoft.com/en-gb/library/ms190640.aspx
"If you want to delay the restore process on the secondary server, choose a delay time under
Delay restoring backups at least." It just means that the restore of a particular log backup will be delayed untill the time specified.
It is also explained here
http://www.sqlskills.com/blogs/paul/a-sql-server-dba-myth-a-day-730-multiple-mirrors-and-log-shipping-load-delays/
Regards, Ashwin Menon My Blog - http:\\sqllearnings.com
Similar Messages
-
During logshipping, job on secondary server is ran successfully BUT give this information
"Skipping log backup file since load delay period has not expired ...."
What is this "Load delay period" ? Can we configure this somehow, somewhere ?
NOTE : The value on "Restore Transasction Log tab", Delay Restoring backups at least = Default (zero minutes)
Thanks
Think BIG but Positive, may be GLOBAL better UNIVERSAL.How to get the LSBackup, LSCopy, and LSRestore jobs back in sync...
Last I posted the issue was that my trn backups were not being copied from Primary to Secondary.
I found upon further inspection of the LS related tables in MSDB the following likely candidates for adjustment:
1) dbo.log_shipping_monitor_secondary, column last_copied_file
change last copied file column to something older than the file that is stuck. For example, the value in the table was
E:\SQLLogShip\myDB_20140527150001.trn
I changed last_copied_file to E:\SQLLogShip\myDB_20140525235000.trn. Note that this is just a made up file name that is a few minutes before the actual file that I would like to restore (myDB_2014525235428.trn). 4 mins and 28 seconds before, to
be exact.
LSCOPY runs and voila! now it is copied from primary to secondary. That appears to be the only change needed to get the copy going again.
2) For LSRestore, see the MSDB table dbo.log_shipping_monitor_secondary, change
last_restored_file
again I used the made up file E:\SQLLogShip\myDB_20140525235000.trn
LSRESTORE runs and my just copied myDB_2014525235428.trn is restored
** note that
dbo.log_shipping_secondary_databases also has a last_restored_file column - this did not seem to have any effect, though I see that it updates after completing the above and LSRestore has run successfully, so now it is correct as well
3) LSBackup job is still not running, the job still has a last run date in the future. Could just leave it and eventually it will come right, but I made a fairly significant time change, plus it's all an experiment....back to MSDB.
look at dbo.sysjobs, get the job_id of your LSBackup job
edit dbo.sysjobschedules - change next_run_date next_run_time as needed to a datetime before the current time, or when you would like the job to start running.
I wouldn't be so cavalier with data that was important, but that's the benefit of being in Test, and it appears that these time comparisons are very rudimentary - a value in the relevant log shipping table and the name of the trn file. That said, if you
were facing a problem of this nature due to lost trn files, corrupted, or some similar scenario, this wouldn't fix your problem, though it _might_ allow you to continue? But in my case I know I have all the trn files, it's just the time that changed, in this
case on my Primary server, and thus the names of the trn logs got out sync. -
Please help. After a recent iOS7 update my iMessages are gone and I can't get it back, nor can I log into my Apple ID. MY PASSWORD is not expired. iPhone 4.
See Here > Apple ID: Contacting Apple for help with Apple ID account security
Ask to speak with the Account Security Team... -
Can any one help. How do i get my google app to open on my iphone? It just flashes up but does not open. I have deleted this app, and backed and restored and downloaded again but has not made any difference. Thanks.
Tap Settings > General > Reset > Reset All Settings
Then restart your iPad.
See if that makes a difference. -
I was not able to back up my files since November 22,2013. It only takes 30 minutes to an hour to back up it. But when I checked, 36 hours was the estimated time. Please help me how I should deal with this. Thank you.
It's definitely the space. Try this program:import java.io.*;
import java.util.*;
public class FileRead {
public static String[] readFile (String fileName) throws IOException {
BufferedReader reader = new BufferedReader (new FileReader (new File (fileName)));
StringBuffer contents = new StringBuffer ();
String line;
while ((line = reader.readLine ()) != null) {
contents.append (line);
contents.append ("\n");
StringTokenizer tokeniser = new StringTokenizer (contents.toString ());
String[] results = new String[tokeniser.countTokens ()];
int i = 0;
while (tokeniser.hasMoreTokens ()) {
results[i ++] = tokeniser.nextToken ();
return results;
public static void main (String[] parameters) throws IOException {
String[] contents = FileRead.readFile (new Boolean (parameters.length == 0 ? "false" : parameters[0]).booleanValue () ? "d:\\java\\forum\\a b c\\test.txt" : "test.txt");
for (int i = 0; i < contents.length; i ++) {
System.out.println (contents);
}(you must replace d:\forum\a b c by your own space containing directory)
I can run java FileReaderwithout a problem, but get a FileNotFoundException forjava FileReadertrue.
Kind regards,
Levi -
Help, since loading Maverick I am not able to open Quicken, any suggestions
since loading Maverick on my macbookpro I have not been able to open Quicken, any suggestions
see: (More Like This)--> https://discussions.apple.com/message/23575544#23575544
-
The list of current news...latest headlines has not changed in the last 3-4 days. at the top of the headlines list is a muted message that says "live bookmark feed failed to load" This problem coincides with my updating to firefox 7.0.1. Is there a suggestion for a resolution? thanks Regie
Try to remove that not working Latest Headlines feed and create a new feed by visiting this URL.
*http://fxfeeds.mozilla.com/en-US/firefox/headlines.xml -
My itunes on my computer will not let me log in, because it says that the account has never been used. Help me.
Hello zahler4,
Welcome to the Apple Support Communities! This is a common alert message when your Apple ID has not yet been configured for use with the iTunes Store. To configure it, you should have the option to “Review” - at which time you can add a payment method to your account. For more information, check out this resource:
Using an existing Apple ID with the iTunes Store, Mac App Store, and iBooks Store - Apple Support
http://support.apple.com/en-us/HT201762
When using the store for the first time, you must provide a payment method. After you configure the account you can change your payment information to None:
Why can’t I select None when I edit my Apple ID payment information? - Apple Support
http://support.apple.com/en-us/HT203905
Cheers,
Matt M. -
How do I back up files on a HDD that has failed?
Hey guys
Computer noob here needing some help!
I have tried to repair this HDD but this error keeps coming up
I have tried to run it with DiskWarrior as well and this error message comes up
It's telling me to back up as many files as possible but how do I backup the files if I cannot access anything on the HDD?
I really need to get my CV off this. Can anyone assist me with this?
Thanks in advance.If DiskWarrior can't fix the disk you're going to have to use one of those very expensive data recovery centers to try to get any information off the disk at this point.
Clinton -
It maybe to do with the registry cleaner. Most people seem to fix it by using restore points which I just realised I hadn't created any beforehand....don't lecture me on it I already know, stupid move.
Using Vista.
I also know I have a lot of stuff like plug ins and such that I don't need nor use but I'm lazy :DIt does not immediately delete the files that are missing.. it merely tries to backup the new files it has discovered on the external drive. Since you moved the files there, the backup at least for a while will contain both copies.. and that is why it doesn't have enough space to backup.
Fixing the problem.. hmm pondini is the expert.. you should be able to delete the backup of the photos in existing backup.. there are instructions to do it.. but it is a very poor way to do things.
Much better. .archive off the existing backup.. this is long and slow but worth it. you need a usb drive of the same size as the TC drive. Then erase the TC and start a fresh set of backups.
The alternative is to use the USB drive as a new target.. but it is much slower than the TC internal drive.
http://pondini.org/TM/12.html -
Has anyone any ideas other than the Apple shop to fix the tilt issue, reset back to factory default, still not working, changed the locking position, and more or less given up. Seen lost of notices around Temple Run and how this seems to happen after installing that particular app.
You have indicated you did a restore with no affect. You don't mention specifically if it is not working with multiple applications or not. I have had one or two apps that quit recognizing the tilt. If it is just one or two apps, delete and re-download/install those apps. If it is with all apps, then you are indeed looking at a trip to Apple to get it fixed. Or you can contact them through one of the options here: http://www.apple.com/support/contact/
-
I updated to Mac OS10.6.8 earlier today, and since then my iPhoto application has quit working. It freezes on opening. Any idea why or how I can fix it.
Make a temporary, duplicate copy of the library and apply the two fixes below in order as needed:
Fix #1
Launch iPhoto with the Command+Option keys held down and rebuild the library.
Select the options identified in the screenshot.
Fix #2
Using iPhoto Library Manager to Rebuild Your iPhoto Library
Download iPhoto Library Manager and launch.
Click on the Add Library button, navigate to your Home/Pictures folder and select your iPhoto Library folder.
Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File ➙ Rebuild Library menu option
In the next window name the new library and select the location you want it to be placed.
Click on the Create button.
Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments but not books, calendars or slideshows. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory. -
I am trying to install iTunes 10.7. The installation gets all the way to the end and says "removing application" then stops and gives me an error message that states there is a missing file and it cannot complete the configuration. Please contact my support or package dealer."
Confused - my old itunes worked fine - haven't removed any programs, etc.,
HelpTry the following user tip:
"There is a problem with this Windows Installer package ..." error messages when installing iTunes for Windows -
Why has my ipad 2 stopped receiving emails for over a month when I have not changed any settings
Does the iPod connect to other networks?
Does the iPod see the network?
Any error messages?
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on the router
- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar
maybe this:
iOS: Wi-Fi or Bluetooth settings grayed out or dim
If not successful, an appointment at the Genius Bar of an Apple store is usually in order.
Apple Retail Store - Genius Bar -
Error File.createTempFile permission to delete has not been granted
Hi,
I am new in Java. I wrote something easy like this:
public class Utils {
public static String createMyTempFile() {
String result = "";
try {
File file = File.createTempFile("test",".txt");
file.deleteOnExit();
catch(Exception e){
result = e.getMessage();
return result;
But appear the next error message:
"Unable to create temporary file"
But i run the same script with SYS user theres no problem, asume is a permission problem, but i dont know which permissions or how can i grant it.
Thank youGrant Privileges
The relevant permissions must be granted from SYS for JServer to access the file system:
EXEC DBMS_JAVA.grant_permission('SCHEMA-NAME', 'java.io.FilePermission', '<<ALL FILES>>', 'read ,write, execute, delete');
EXEC DBMS_JAVA.grant_permission('SCHEMA-NAME', 'SYS:java.lang.RuntimePermission', 'writeFileDescriptor', '');
EXEC DBMS_JAVA.grant_permission('SCHEMA-NAME', 'SYS:java.lang.RuntimePermission', 'readFileDescriptor', '');
GRANT JAVAUSERPRIV TO SCHEMA-NAME;
The affects of the grant will not be noticed until the grantee reconnects. It is up to the individual to decide on the level of access that is required.
Depending on the documentation used, you may be told to add the directories you intend to access to your UTL_FILE_DIR parameter in the Init.ora file. I have not found this to be necessary when using the Java approach.
Maybe you are looking for
-
I have had a new hard drive installed in my imac,I down loaded my files to a external hard drive,when I tried to re start,it asked for my password,I typed it in and it did not recognise it and I can't use my computer!can anybody help me please!!
-
SBO 8.8 PL10 DTW Service APInvoice
Hi, I am having trouble importing AP Invoices (service type) in to SAP Business one 8.8 PL10. I have not imported service type AP invoices before and there does nto seem to be examples of this in the DTW templates.... Header file: RecordKey <doc
-
I want recover in ABAP program a "Long Text"
Hi, In FB01 transaction when you go to "Enter Fixed Asset posting: Correct G/L account item", there are a button with a label: "Long Text". When you push this button appear a little window with name "Long Text for Document Line Item" and you can wri
-
Site Studio Publishing Utility fails with HTTP rsponse 403 for URL
Just installed Publisher with Subscription Client. The two pieces seem to work together until I start a replication. Then I get the following a number of times and it stops. [1]IOException: Server returned HTTP response code: 403 for URL: http://loca
-
Hi, I'm new to GuiXT, and I've read about the documentation on GuiXT. Normally it's used to customizing the selection options on a standard SAP transaction. I have a requrirement to add extra fields on the output of FBL5N and append an already deve