LOL - Update 4.3.1 worked while my computer crashed

Hi there
I spent too much time to get this update working! First I did normal update, and got an error 3194. My phone stucked in recovery mode. After that I tried to recover it (my only clickable option) -> error 1015. Researched a bit and tried some things... recover again -> error 1013.
But the thing is, at least the (IDIOT) apple signing control worked then and see a progress bar on my phone. but after 2/3 of the installation it aborts, phone went to recovery mode and itunes still showed me error 1013.
Then i changed the usb port and retried again. Same here, see progress bar, and then, my computer crashed to a bluescreen. BUT my iphone is still installing and finally finished it CORRECTLY.
I don't know if it was because the usb port or the crash. But if it was the crash which helped. SHAME ON YOU APPLE, just make working software, i paid for that!
Btw. I saw you deleted all my ipsw files - thank you really much! I read some things about, were unable to restore to the actual installed firmware. Why that? I like to install the version i like - and restore from backups i like!
This was my last apple product i'd bought.
greets

Barry Porter1 wrote:
saw you deleted all my ipsw files<<</div>
how did I do that?
This forum is just users helping other users. There is no one from Apple here. Did you check to see if you had antivirus/anti spyware programs running when doing the update? these have been known to cause problems.
the signing controls are for your protection.
saw you deleted all my ipsw files
ups sorry then its the wrong place for my anger
but maybe it helps someone

Similar Messages

So i tried updating my iphone 4 and my whole computer crashed and when i tried to turn it on, it would just show the apple logo and load, then turn off

so i tried updating my iphone 4 and my whole computer crashed and when i tried to turn it on, it would just show the apple logo and load, then turn off.

See here for
Unable to Update or Restore
http://support.apple.com/kb/HT1808

HP X4000b Bluetooth Mouse (H3T50AA) stops working if not moved for a while, then computer crashes

I will be very happy if someone answers this, 'cos from all the other related posts, my outlook is pretty bleak. At least give me the thumbs up for trying, or a little human contact. Proof this post existed.
Alright, I (fairly) recently updated to windows 8.1on my Samsung quad-core notebook - Model is NP905S3G
For the full info- see the picture.
Anyway, the problem is, that ever since I installed Windows 8.1, if I don't move the mouse for around 1minute when it is on (i.e. I just leave it still for 1 min because I'm typing stuff), it stops working. Moving the mouse simply doesn't do anything. If I look on the 'devices' screen, it is still shown as connected, and I can try re-connecting it, but it doesn't work. Turning on and off doesn't work. Pressing that little blue 'connect' button doesn't seem to do anything normally, and in this case, does nothing. Un-installing and re-installing the mouse does not permanently solve the problem (but does restore connectivity, at least until I leave the mouse idle for too long again)
Currently, once the mouse has stopped moving on the screen, I press the power button (which for me makes my computer sleep). When I do this 1 of 2 things happen; either it goes to sleep as instructed, or it stays on indefinitely, and I have to hold the power button for 5 seconds to do an emergency shut-down. This is a pain, especially since nothing is saved, and the computer takes extra-long to turn on the next time.
The real problem is this: about five minutes after the mouse becomes unresponsive, the computer crashes. It is during this five minute period that I can save all my stuff, but if I have been typing non-stop, I may not even notice that the mouse has stopped moving, and so the computer often crashes at unpredictable times. This of course is a major annoyance, and what’s more, sometimes just when I click a link my mouse freezes, and I have to restart my computer or let it crash.
The crash message is DRIVER_POWER_STATE_FAILURE, and comes on a blue screen with a message saying the computer is collecting some error info, and a silly little smiley face. I have come to hate that smiley face.
If you’ve read this far, thank you very much, PLEASE FIND A SOLUTION, MY MOUSE IS PRETTY UNUSABLE AT THE MOMENT
PS. When I feel it is too risky to use a mouse, I use the touchpad. The setting where tapping=clicking really annoys me, and I also don’t like the inverted scrolling. I change these settings on my preferences, but for some reason they are never saved once I turn my computer on. They used to be saved before updating from Windows 8 to 8.1. Any suggestions?

Not actually solved. The problem still happens and isn't limited to me or my headset.
I just want this question out of my sidebar and this is the only way to do that!

Camera Raw is not working due to computer crashing

I Need some help in figuring out why and how to fix this problem…. My computer crashed and I had it repaired it is the same computer that I initially installed Photoshop Cs6 onto… The photoshop part work just fine, when I try to use the Camera Raw for a Quick Edit. It Tells me That a qualifying product has to be launched at least once to enable this feature… This is very frustrating esp. when you pay so MUCH $$$$$$$ for this product. I do have a license for this… I wish their was a phone number so you actually could talk to someone. But I hope there is someone to help with this issue… Thanks

When your computer crashed and needed to be repaired, I assume something was messed up with Camera Raw and/or Photoshop. I would recommend doing a clean uninstall and then re-installing Photoshop completely. Any PSD you have on your computer will not be affected, but some preferences may be reset to factory defaults.

ITunes fails updating iPhone and iPad - works using another computer

I am unable to update or restore the software on my iPhone 4 and my iPad 2. It always fails, sometimes with a 1013 error, sometimes with other errors.
It failed while attempting to update my iPhone to 4.3 and also while trying to update to 4.3.1.
I was also unable to update my iPad 2 to 4.3.1.
I connected the devices to another mac and was able to successfully update both devices the first time.
This problem occurred when running iTunes 10.2 and still occurs with 10.2.1.
I have also downloaded a fresh copy of iTunes 10.2.1 and still have the problem.
Can anyone think of a solution other than formatting and reinstalling everything?
My configuration is as follows:
MacBook Pro i5 2.4ghz Mid 2010
OS X 10.6.7
8gb RAM
iTunes 10.2.1

After updating iTunes to 10.2.2 it wiped out my iPhone, iPad and iPad2 and it will not restore on another pc in the house. I spent 6 hours restoring the iPhone but the iPad and iPad2 has taken 6 hours going thru every step in the support recommendations as well as 3 hours on the phone with 2 separate techs today.
I uninstalled and reinstalled, went thru with the tech and edited the registry as well as the msconfig. Rebooted the PC's, reinstalled, uninstalled all of the anti virus software and did a limited start-up, all to no avail.
You cannot reinstall the last working version of iTunes because the library is synced with a later version - so I have 2 dead devices.
Other friends are experiencing the same problem and I know of 2 dozen others experiencing the same issues.
Apple needs to fix the latest update of iTunes!

I installed lion without software updating and now itunes doesn't work and my computer crashes when loading photobooth?

I didn't bother to install the software updates my computer needed to do. It said something about prepping for lion, but I thought if I installed lion it wasn't neccesary. Now seeing as I have all these bugs, I feel like that was a mistake. I also did not bother to make a time machine thing to go back on, or any copy of my snow leopard hard drive. Is my only option now to make a clean install of snow leopard with the cd and wipe everything, then install lion again?
I tried using command R on startup to reinstall lion, but it says my disks are locked.

Hi, likely something else isn't updated, maaybe Safari?
Is his he version you have, & Safari 5.0.3 or more?
http://support.apple.com/kb/DL1575

My ifone3gs stopped working while updating...its even nt reading sim..it just shows a connection sign toitune.. whats the prb??

my ifone3gs stopped working while updating...its even nt reading sim..it just shows a connection sign toitune.. whats the prb??

It means that your phone crashed during the updating process and is now in recovery mode. See this article:
iPhone and iPod touch: Unable to restore

My phone is not working because of a crash on my computer while a blackberry update

Hi today i was on my laptop updating my phone and then my laptop battery crashed and then i tryed to open my phone and it did not work i removed my batterie and i put it back in but it did not work more so now im mad my phone is a blackberry curve 9360

Hi and Welcome to the Community!
I'm trying to parse through your post...lacking punctuation makes that a bit difficult. But I think I understand your situation. However, you failed to state exactly the method of update you were doing...it can be from the update website, from the Desktop Software without the OS package installed to your PC, or the Desktop Software with the OS package installed to your PC. Hopefully I will guess correctly in providing you with things that might help.
You should probably start with these two KBs:
KB10144 How to force the detection of the BlackBerry smartphone using Application Loader
KB27956 How to recover a BlackBerry smartphone from any state
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Firefox will not open after i use it 3 or 4 times i have to update to make it work ?

Using XP pro after a couple years firefox quit working. will not open, went to support tried everything including a clean install. after which it worked for a short while then won't open. click on icon nothing happens. downloaded 18.0 update and installed worked a few times then quit. created new profile but when i click on firefox does not do any thing. if i run the update installer it will work for a while then quit to make it work again i have to update again ant it will work mabey for 1/2 to 1 day. after i update when firefox opens then it will give me the profile box. after it quits it will not load the profile box until i update again.

Which security software (firewall, anti-virus) do you have?
Try to boot the computer in Windows Safe mode with network support (press F8 on the boot screen) as a test to see if that helps.
A possible cause is security software (firewall,anti-virus) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox and the plugin-container from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process and the updater process.
See:
*https://support.mozilla.org/kb/Server+not+found
*https://support.mozilla.org/kb/Firewalls

3GS with iOS 4.2.1 update - voicemail no longer working through bluetooth?

Hi Folks.
I've been happily using my iPhone 3GS with my Jeep Patriot's bluetooth/stereo system for months (it's called a Mygig). However, I just upgraded to 4.2.1 and now when I connect to my voicemail the sound doesn't come through the system - the iPhone thinks it is sending the audio to the stereo, but the stereo remains idle. So I have to select one of the audio options (phone/speaker) to hear anything.
If however I make a phone call, or if the phone rings and I answer it, it works fine.
Even if I use voice dialling to call voicemail, that works through the bluetooth, but as soon as it has finished the voice dialling and actually calls voicemail the stereo goes back to being idle again, even though the phone thinks it's still connected.
So at present if I want to connect to my voicemail while driving I have to use the speaker. Only for voicemail. Weird!
I am thinking this is a software update issue, as it worked fine prior to the update, and everything other than calling voicemail works fine through bluetooth.
It's as if the phone isn't talking to the bluetooth properly when it's dialling the voicemail, which is somewhat of a 'hardwired' thing, given it has its own button. I tried tricking it by dialling the actual number instead of using the voicemail button, but the iphone knew it was voicemail...
Any ideas?
PC

Yah, have the same issues since upgrading to ios421. Pretty annoying... I have two cars, and the issue is same with both bluetooth systems. I am able to make and receive calls but cannot listen to my mobile voicemail.

After update Airport no longer works

Hey All,
I've had my PBG4 for over a year now and have a APE Base to go with it. About a month or so ago I ran the apple update program and walked away while all the programs were installing. Upon rebooting my laptop I no longer see my base station at all. The base station is located 4 inches from the laptop while I'm home. I do no remember which patches were installed at the time. I am assuming that it was an AirPort patch that is causing this issue but I can't tell it if it was the base station that upgraded or the airport card.
Currently I am cabled into the base station directly but I'd like to be able to go wireless so I can use the laptop around the house again.
Anyone got any info/ideas on this?
Also I'd revert back to an old version to test it out but I read in a couple of posts that you can't scale back.
- Pete

Hi there BDAqua...
I used this Pacifist software and followed instructions on this thread, rebooted, nothing seemed to change. Repaired permissions, nothing changed... I thought, oh well! Maybe I'll go to my local (Warsaw Poland) Apple repair centre.
Sadly, I put my computer to sleep, about an hour later, opened it up with ethernet cable attached for internet, and noticed the wireless icon was now dark... lo and behold, clicked on it and my network was checked (this after having had my password "rejected" a million times before) and ... I carefully slipped the ethernet cable out of the socket... and I was still connected.
So my wireless is working again, since doing all that stuff (back to prior firmware version) but for the life of me I don't know why, since it didn't seem to be fixed immediately after all that tinkering and rebooting! Any thoughts?? Did I actually do something that fixed it (must be, since I finally fooled around with it after almost 3 weeks of no wireless) or was this just random??
This is far too un-Apple-ish, by the way! I was used to this with PCs, but first time I've ever had to get so technical with my Mac!

HT1483 I get a message "The Itunes server could not be contacted, check your internet connection" when trying to check for Ipod Nano software updates. I have a 1st generation Nano and haven't updated the software for a while. My internet connection is wor

I get a message "The Itunes server could not be contacted, check your internet connection" when trying to check for Ipod Nano software updates. I have a 1st generation Nano and haven't updated the software for a while. My internet connection is working. Was thre a change in the internet address for NANO software updates? Do I have to reconfigure something in Itunes to point to the correct address?

What version of iTunes are you using? The latest is 10.6.3. In iTunes, choose Help -> About iTunes to check the version number. If it's lower than 10.6.3, download the latest version from here.
B-rock

Step backward hotkey not working while using brush tool? - Photoshop CC 2014

Hi,
I'm using Photoshop CC 2014 in Mavericks. I've tried using the step backward hotkey (command+option+z) and it seems to work fine. Then I use the brush tool and it stops working until I switch to another tool. I'm a digital artist, so I move very quickly while painting, and switching out of the brush tool to step backward on something slows me down terribly. I'll switch and the hotkey works as intended. I've tried changing it to a different set of keys (for example command+z) with the same results. Is this a bug or a feature?

Usually it turns out for tablets that aren't mainstream that they just haven't updated their drivers to work with photoshop cc.
For example, most people don't have problems with wacom tablets in photoshop cc.
One other thing that could possibly be the cause besides the tablet driver is your graphics card driver.
If in photoshop cc you go to Edit>Preferences>Performance and turn off Use Graphics Processor and then restart photoshop cc, does that make a difference?
If it does then perhaps your graphics card driver needs to be updated from the maker of the card.
(not through windows updates)

Update debugger is not working

Hi All,
My problem is "Update debugger is not working" is not working.
In VA02, I am creating a EDI output type, before saving it i am going into debug mode activating the 'Update Debugger'.
But after that a message is coming as 'Update debugging has been triggered' but debugger screen is not coming up.
Please let me if you have inputs on this.
Thanks
Satyamkumar Jha

>
Satyamkumar Jha wrote:
> Hi Saravraj ,
>
> Even if 1 session is opened then also it is not going for update debugging.
>
> Thanks
> Satyam
Did you check if a COMMIT statement is getting triggered(you can do that by placing a break point in the debugger at the statement COMMIT)? Click on F5 once the control reaches COMMIT statment and wait for a new session to
get opened for debugging.
Not sure, about the debugger that you are using(classical/New), lately, I have faced issues with update debugging while using new debugger, it would be a good idea to cross-check in classical debugger.
-Rajesh.

Why has my 8x8 desktop app on my Macbook Pro running OS X Yosimite 10.10.1 suddenly stopped working while the app on my iPhone and the online service both work fine?

Why has my 8x8 desktop app on my Macbook Pro running OS X Yosimite 10.10.1 suddenly stopped working while the app on my iPhone and the online service both work fine? Is this because of some recent software update by Apple? 8x8 support acknowledges issues with no current work-arounds? The 8x8 desktop app worked until early December, then quit. I've deleted and re-downloaded the app, but no difference.

The solution is :
1. Delete iPhone configuration utility. Just drop it to the trash
2. Run
sudo rm -rf /private/var/db/receipts/com.apple.pkg.iPhoneConfigurationUtility.*
rm -rf ~/Library/Preferences/com.apple.iPhoneConfigurationUtility.plist*
3. Delete the whole folder: /System/Library/Extensions/AppleUSBEthernetHost.kext
4. Reinstall iTunes (just over the previous one)
5. Restart
incase of any issues, visit this thread: https://discussions.apple.com/thread/3725328?start=15&tstart=0

LOL - Update 4.3.1 worked while my computer crashed

Similar Messages

Maybe you are looking for