Lombard, iMovie and PC Card

I have a Lombard 333 with 320 MB RAM and OS 10.2.8 and 9.2.1 on two 20GB partitions. I also have a cardbus firewire card, 400MBPS. On OS 9 the card shows up on the desktop when I install it, but if it's already in when I start it up it will not start, just shows an unending gray screen. When I tried to hook up my Canon ZR25 by firewire iMovie 2 says, camera not connected.
On OS 10 the card does not show up on the desktop, but iMovie 2 sees the connected camera and can control it.
Is there any way to get the camera recognized in OS 9? Not that it matters, I mostly use the iMac G5, but if I ever actually need to? I don't have any other firewire things to try out to see if they work, which ones might?

Sludgedragon,
Do you have these three items in the System Folder > Extensions folder?
FireWire CardBus Enabler
FireWire Enabler
FireWire Support
If not, you can custom install them if you have a MacOS 9.2.1 CD; if your CD is an older verswion, you will not be permitted to install software.
If you used the MacOS 9.2.1 Update to update an earlier version of OS, it has all three extensions. I would do this:
1. Start up to your OS 9.2.1, then insert your FireWire PC card. You should have a PC card icon on the desktop since the powerbook recognizes this piece of hardware.
2. Run the MacOS 9.2.1 Update on top of your installed OS 9.2.1. The Update will "see" that you now have FireWire hardware and install the appropriate files. There is no way to custom install individual components from an Updater (there is using a third-party utility but not necessary here).
3. Now since you cannot boot your Lombard to 9.x with the FireWire PC card present, eject the PC card by pushing an opened paperclip into the small hole next to the PC card slot.
4. Now restart, then insert the FW PC card and see if it works.
I have a cheap FW PC card for my Wallstreet; it will boot into 9.x with the PC card present and work normally. But if I insert the card after the 'book is started, it will not work...I must restart with the card installed. So your mileage may vary on how the card will perform after installing the software (if in fact it was missing).

Similar Messages

I accepted/installed an update for iMovie and it turns out that this version is not compatible with my graphics card. So now I can no longer open or use iMovie. Any ideas on how to get around this - how to revert to the previous version.

I accepted/installed an update for iMovie and it turns out that this version is not compatible with my graphics card. So now I can no longer open or use iMovie. Any ideas on how to get around this - how to revert to the previous version??

Look in your Applications folder. If your system behaved as expected, you should have an iMovie 9.0 folder in your Applications folder. Apple moved the old version there as even they suspected the new versions was a train wreck.

IMovie and iDVD, Stupid Upgrade Questions, Sorry Must Ask

Okay, the deal is I have a PowerMac G4 Version 2.1 with a Combo Drive. I am upgrading to Mac OSX 3.0 so I can do certain things in iMovie and acquire a better browser. (My constraints on the iMovie project about which I've been inquiring are that at least 40 people have been waiting for copies of it for about a month and wondering why I don't come through with it--I sent a lengthy explanation to the guy who'll be duplicating it in case anyone asks. That's one reason I'm in such a hurry I have to ask urgent questions at forums and newsgroups and don't take the time to read every word ever written on every one of these systems and their various applications, abilities, and uses.)
I started out thinking I was about one step from having a completed project and the more I learn, the more grim the situation looks. Yet I've done ALL THIS WORK already to create beautiful titles and elaborately-edited outtakes. I HATE to ditch it all if any faint hope flickers into sight!
My Mac came with the following:
iMovie 3.0.3 -- which seems to be working fine, only problem is, due to deficiencies in other equipment, I'm having trouble getting my movie to DVD or into any other form where it can be played anywhere outside the Mac!
iDVD 2.1 -- My feeble brain, inadequate as it may be, has so far gathered the information that to go to DVD, a project can't be played in iMovie and sent straight to a DVD burner (can it?) There has to be some intermediary step. (Right?) People have argued the various merits of iDVD vs. Toast to accomplish this step. I hadn't opened my copy of iDVD because I am in no way near the point of being ready to make a DVD--I have not yet finished editing the project in iMovie. I made the hideous error of ASSUMING that since this came installed in my Mac, it would work fine when needed, just as iMovie did. When I tried to open it just to see what version I had, it wouldn't open and told me this:
System Requirements
iDVD 2 requires a PowerMac G4 computer with 256 Megs of RAM, a built-in DVD-R Superdrive and Mac OS 10.1.3 or later.
Stupid redundant bonus question #1: WHY would this come installed on a Mac which lacks the hardware to use it? (iMovie could still be used to edit, and then copy projects--if I had a digital video camera--which I don't. The only other way we've figured is to send it back through the Canopus ADVC110 converter I used to get the video in there, and play it out to a VCR--a cumbersome process I've been assured will result in crummy quality.)
Okay, here are the REAL questions:
1. I don't suppose there's any way the Canopus could be connected to the DVD burner and the information sent to a DVD that way? Just asking.
2. Obviously the upgrade isn't going to fix things to make iDVD work, as I'm already using Mac OSX 10.2.8, so I would assume its discontent stems from not having the Superdrive--at least, it was complaining something about inadequate hardware and I think that's what it meant. Will connecting a DVD burner via FireWire convince iDVD to work (either automatically or after some sort of tweaking), or am I stuck replacing the drive? I bought a DVD burner the minute I realized my drive was a Combo Drive and not a Superdrive (which is the first time I stuck a blank DVD in it and nothing happened) before learning details about this intermediary step and that there is more than one way to accomplish it.
3. Is it even worth replacing the Combo Drive with a Superdrive or is it more worth buying a whole new Mac? If I am FORCED to buy a new Mac, what should I do with the old one? (Not only am I ethically opposed to tossing a perfectly good piece of electronic equipment into the ravine, I might get fined for littering. Can a good home be found for it? For that matter it would be a pain as I've saved all sorts of stuff to the Hard Drive which would have to be transferred to the new one before I could get rid of the old one. So can I keep the old one...PLEASE?)
4. After making the system upgrade, will I be able to bypass iDVD entirely by using Toast, or does Toast also have all sorts of requirements my hardware does not possess so I'll still be SOL, stuck replacing drives or even the whole Mac, or going directly to crummy-quality VHS as there is NO OTHER WAY OUT?
5. After making the system upgrade, would I be ready for more advanced versions of iMovie and iDVD? Are any upgrades free, or does every improvement cost? Do I get them all at the Apple site, order some of them from some supplier or other the way I did with the Mac OSX upgrade, or what?
Thanks for helping to clear up my massive confusion!!!

Wow, thanks. It's good to know iDVD is still an option, even if I don't buy the Superdrive (is that even possible, to get the Combo Drive taken out of my current Mac and a Superdrive put in? There's a question still unanswered.)
(I think this is good to know--because part of my reasoning in asking the question was to eliminate one option or the other, and now I'm ending up with options of options, but hold on for Part 2 as I do have some questions concerning the capabilities of iDVD and Toast.)
Partly answering one of my own questions (although I'd appreciate confirmation from someone who actually knows,) if these Toast 7 requirements mean what I think they do, I don't see anywhere that it says the computer MUST have a Superdrive and CAN'T use an external DVD burner!
Toast 7 Titanium
Requirements:
* PowerPC G4 processor or faster (G5 recommended for viewing DivX files on your Mac)
* PowerPC G3 processor and Mac OS 10.2 users, see Toast 6 Titanium or Popcorn
* Mac OS X v10.3.9 or later
* 300 MB of free disk space to install
* Up to 15 GB of temporary free disk space during usage
* QuickTime 7 or later
* CD or DVD burner and recordable media
If this is true (that I can use an external DVD burner) I like Toast already! My Quicktime Player is only version 6.5.2--is it going to be difficult, expensive, or both, to upgrade that? If it is or the other System Requirements are not met I can just go with Toast 6.
As far as those requirements, I promise you I don't understand a word of it but here is what my System Profiler says my Mac has. Maybe someone can make sense of it and help me decide which version of Toast to get or, if not, what to do:
System Profile
Software Overview:
| |
| System version : Mac OS X 10.2.8 (6R73)
(As I said, I'm upgrading to 10.3.0 soon, and obviously if I want Toast 7 gotta figure out the best way to go to 10.3.9 or higher.)
| Boot volume : Hard Drive |
| Kernel version : Darwin Kernel Version 6.8: Wed Sep 10 15:20:55 PDT 2003; root:xnu/xnu-344.49.obj~2/RELEASE_PPC |
Hardware Overview:
| |
| Machine speed : 867 MHz |
| Bus speed : 133 MHz |
| Number of processors : 2 |
| L2 cache size : 256K (times 2) |
| L3 cache size : 1MB (times 2) |
| Machine model : Power Mac G4 (version = 2.1) |
| Boot ROM info : 4.4.6f2
Memory Overview:
Location Type Size
DIMM0/J21 DDR SDRAM 256 MB
DIMM1/J22 DDR SDRAM 512 MB
DIMM2/J23 empty
DIMM3/J20 empty
Network Overview:
Built-in:
| |
| Flags : 0x8051<Up,PpoinToPoint,Running,Multicast> |
| Ethernet address : 00.00.00.00.00.00 |
| IP : 67.0.142.95--> 67.0.128.6 |
| Subnet Mask : 255.0.0.0 |
| |
Devices and Volumes
PCI:
SLOT-1(AGP):
| |
| Card Type : NVDA,GeForce4MX |
| Card Name : NVDA,Parent |
| Card Model : GeForce4 MX |
| Vendor ID : 10de |
| Device ID : 172 |
| ROM# : 1121 |
| Revision : a5 |
| |
USB Information:
USB Bus 0:
Apple internal modem:
| |
| Product ID : 33282 ($8202) |
| Vendor : HCF USB V.90 Data/Fax Modem |
| Device Speed : Full |
| Power (mA) : 500
FireWire Information:
No FireWire devices found.:
(Unsure why it says this as the Canopus Converter is a FireWire device and it's connected, turned on, and has been working.)
Bus:
CD-RW/DVD-ROM:
| |
| Disc Burning : Fully supported.
(Obviously this means CDs only, not DVDs.)
Hard Drive:
| |
| Disk Size : 57.26 GB (1K = 1024) 62 GB (1K = 1000) |
| Unit Number : 0 |
| ATA Device Type : ata |
| Device Serial : VNC303A3L6AAHA |
| Device Revision : VA3BA52A |
| Device Model : IBM-IC35L060AVVA07-0 |
| |
Hard Drive:
| |
| Volume Size : 57.26 GB (1K = 1024) 62 GB (1K = 1000) |
| Ejectable : No |
| Writable : Yes
One thing which may really sway me in favor of Toast is, will it make possible burning 2-hour DVDs? Supposedly iDVD will not enable anything longer than 90 minutes, and when I get to the other big project for which I really want to use the Canopus ADVC 110 converter, that is, converting my home movies from either VHS or 8mm video camera tape to DVD--well, ALL of my tapes are two hours long, because that's the way they come!! I don't see being limited to making 90-minute DVDs as anything but another GIANT PAIN of which I'm already amply supplied! So if Toast will fix this dilemma I'm ALL FOR IT!
As always, thanks for help and advice.

Please help with importing and using imovie and idvd

Hi,
Please forgive my lack of knowledge. I previously had a mini dv camcorder that was so easy to use with imovie hd. Now that I have switched to an HD Usb 2.0 camcorder that has built in 16gb memory and memory cards, I have had such a great deal of trouble. I really hope you can help and point me in the right directions.
Importing movies are fine, but they take so long! Currently, when I import a movie, I set the camcorder to PC mode and import through imovie. But the camcorder stays on, and I'm not sure if this is the best way or healthiest for the camcorder. Do you have a better/faster way to import movies? Is there a way to drag the video from the memory onto the computer, and then from there import the movie? I think at least I wouldn't have to leave the camcorder on.
Also, one major issue I have is that each movie is broken down into 100 or so clips. I coach basketball, and videotape the games. When there is stoppage, I pause the camcorder. I guess that creates so many clips, so that when the film is imported, there are over 100 clips for the entire movie. Is there a way of making that just 1 entire movie/clip?
Once I have imported the entire movie, which is 100+ clips, I want to simply create a dvd of the game. I know I have to share it, but do you have a better suggestion as to how I should handle this?
In the past, all I did was import the mini dv movie into imovie HD, share into idvd, and then that was it, dvd made. This process had become so time consuming.
Please help!

Yes, I recognized there would be a slight pause between clips - but after all - you paused the camera at those points.
Putting them all in sequence in iMovie and then encoding in iDVD will take a lot of time.
An old favorite saying of mine is "not every job worth doing, is worth doing well'. The meaning being sometimes 95% is good enough so you can go on to the next job.
How much work do you want to put into each DVD? Can you live with the slight pauses?
would you suggest using a memory card?
Yes, but 16GB cards aren't cheap (yet).

Scrambled graphics in iMovie and iPhoto

When using iMovie and Wondershare Video Editor I get scrambled graphics which has now spread to iPhoto. Will my iMac recover by itself or is this a sign of a damaged graphic card or similar. Graphics on the internet seem to be working OK. I'm using 4GB ram, is this perhaps not enough memory for intensive work with video editing and editing in PhotoShop?

Be patient. Apple's servers are currently inundated. Try again later or tomorrow.

Problems importing into iMovie and which is the required space..

Hi Karsten!
I could see that you know about video editing. And I have some problems and doubts I would like to ask.
The thing is that I have just bougth an ibook of 80 Gb hard disk RAM 512 MB Speed 1.67 GHz and I am trying to edit a documentary with it. The thing is that I started to importing images from a HDV 1080i Sony Camcorder into iMovie and the speed wasnt in real time, was slowing down to half of the original speed. I went to visit the help of iMovie it was saying when it happens is due to the desfragmentation of the disk, but I dont know if it is the real problem, it is a new computer, and how I can solve it.
And I also would like to know if I could have better results in the video importing and editing with an external hard driver other wise I could add more ram and more memory for the hard disk in the computer...
And the last thing, I would like to know how much space would I need in my computer for install and using Final Cut Pro and if it would be easy with more memory or an external hard drive...
Please Karsten or whoever who can have knowledge about these matter could help me. I really need it so much to start with my docu...
Thank you
Mac OS X (10.4) 80 Gb hard disk RAM 512 MB Velocidad 1.67 GHz

"..which is the difference between FCP and FCE?.."
FCE is Final Cut Express, a cheaper and 'cut-down' version of FCP (Final Cut Pro).
FCE changes HDV (hi-definition) video into a slightly different format called 'Apple Intermediate Codec' when it's importing HDV material - just like iMovie HD does. This means that importing is generally slower than importing ordinary DV, because the movie has to be converted while it's importing. On a G4 PowerBook or iBook HDV might import at half-speed, or take even longer (..maybe 4x 'real time'), as you've found.
The latest version of FCP can import HDV, and edit it, without any conversion, Apple says. But I don't know if that applies on any Mac, or if that needs a special capture card to be fitted into a PowerMac. In theory, I'd expect that importing and editing HDV using FCP HD 5 (..the latest version..) would be faster than on a PowerBook - because there's no conversion involved - but I can't say for certain till I receive my latest version of FCP (..I just did an Apple "cross-grade" to convert my FCP HD 4.5 into FCP HD 5).
HDV doesn't take up any more room on a tape than normal DV, because the high-definition is 'squashed' onto the tape, using MPEG-2 compression. Because iMovie HD and FCE HD can't handle this kind of compressed material directly, they convert it into the Apple Intermediate Codec, and that form of the video takes up more storage on a hard disc than the normal DV does!
So although normal DV uses about 13 gigabytes of hard disc space per hour of running time, the converted HDV (..converted into 'AIC'..) takes up, er ..I'm looking for a recent project ..most are on an external disc ..are here's a simple one: one-and-a-quarter minutes' worth uses 904 megabytes; nearly 1 gigabyte! ..Here's another: four-and-a-half minutes' worth takes up 6.5 gigabytes!
Using normal DV, 6.5 gigabytes would hold half an hour's worth of video, not 4.5 minutes' worth!
So you will need a big external hard disc to store hi-def footage. At least, with iMovie HD or FCE HD.
I don't know if FCP HD 5 would store imported footage in the original HDV format, that is with the same storage requirements of ordinary DV - like HDV tapes. If so, that means that you could store hi-def (..if you're using FCP HD 5..) in just the same amount of space as normal DV ..but I don't know for sure. Maybe you could ask in the FCP Discussions. I probably can't tell you till next week or so..
Where to get a 300gb hard disc? I'm sure there must be at least one shop, or electronics store, in Istanbul which sells them at reasonable prices. Otherwise, look online. There are many companies which now sell 300gb discs: Maxtor and LaCie, for example. But you do need one with a FireWire connection; not just USB. You don't need to buy from an Apple store: buy one from any computer shop ..an external hard disc for a PC works exactly the same ..but you must format it for use with a Mac, as described before.
All I know of Istanbul is Cumhuriyet Caddesi, Taksim Square, and the areas around what used to be the floating bridge, and the Spice Market, and round Haigha Sophia, but there must be lots of computer shops somewhere in the city.
"..I have never used iMovie for editing, I understood it is only good for capturing, sample and concise.." and it's also good for transitions, titles, adding photos and audio, adding video effects and for audio tweaking. And it integrates perfectly with iPhoto, iDVD, GarageBand ..and now 'iWeb'.

Does anyone know what "video rendering error: -50" means?   I am trying to back up a movie i made on iMovie and get that message every time, about 30 times...

Does anyone know what "video rendering error: -50" means?   I am trying to back up a movie i made on iMovie and get that message every time, about 30 times...   OSX10.9.2, iMovie 10.0.3, Toshiba externals 2TB etc

Hi Babowa and Apple:
Thanks for helping me.   Here is my workflow:
I store any file that I save onto my external drives so that I don't fill up my main hard drive.....( I label each external hard drive by year + alpha, such as 14a, 14b etc.) Is that a problem?   Any suggestions?
I know iMovie works from the main iMac HD and therefore needs to find the file that I want in the external drive, such as when I "import" a file from an external such as 14a into iMovie that has been previously downloaded onto the external 14a (I download all SD cards & tapes to externals)......and it sounds like you're saying that is causing iMovie problems because the file is not so easily accessible for iMovie?
I assume that iMovie processes the file that I have "imported" into an "iMovie Event" on my iMac HD. I label that version as say "NLGE 3000E" for my 3000th movie, Event version, "events" that is always rough.
After I have imported media as an event and have labeled an event, "NLGE 3000E," then I go to "new movie" that I assume is a "project".....and I label that version "NLGE 3000P1"...."P" for "project" and "1" for the first edition....also to help me keep track of where my movies go.   I focus on "Projects" then when editing ...and watch which edition I am editing and which edition appears where.
I learned that I need to "share" all movies from "Projects" to save......and store my final versions on my external drive, 14a (eg) so that I am sure that I have a retrievable copy.   I try to share to YouTube from iMovie and succeeded 1/10 tries.
Evidently a movie is not saved unless it is in "theater"?
Please see next "reply" for other comments about retrieval.
Thanks.

AVCHD or MP4 HD using IMovie and IDVD

Okay,
I am new to Macs and like them alot. I transfered from PC to Mac mainly for IMovie and IDVD. Here is my issue:
I use a Sony TX7 Digital Camera as my camcorder. It creates MTS files which I have saved on my desktop. IMovie does not recognize these files which I already understand. I know that IMovie imports directly from the camera itself but still changes the format to AIC. What I am trying to accomplish in the future is the ability to create the best quality HD movies to burn to standard DVDs usin IDVD. I know next to nothing about the whole process of IMovie and IDVD. My main concern is how I should be recording video on my camera. Obviously AVCHD needs to be converted but I have know idea the exact settings I should convert it to in order to keep the majority of the quality. Should I just record in MP4 at 720p? My TV is 720p and I am not looking for the best HD ever. I am just looking for HD in 720p. How can I retain this quality using IMovie and IDVD? I have MTS files on my desktop that I tried converting and the quality is okay, but I would rather not have to convert files in the future. I don't want to copy the whole file structure each time I import my videos because I like to organize my videos in one folder by date. There has to be someone who has had success with this. I just want to produce great looking widescreen home videos using these two software programs. Then there is the whole other mess of what settings to use when importing into IMovie and exporting to IDVD. Can someone experienced with ILife explain this to me?
Thanks,
Matt

Well first thing is iDVD is SD not HD and does nothing HiDef. You need a Blu-Ray, Apple TV, or other device to watch HD.
http://unofficialimoviefaq.com/tt/BurnHD.html
Even "pro" apps like Final Cut will turn MTS files in to AppleProRes so you can edit it faster.
You need the WHOLE CARD not just the MTS files for proper editing. http://www.youtube.com/watch?v=Q6QF-1WxNwI
Daniel C. Slagle
Keeper of the "Unofficial" iMovie FAQ
I may receive some form of compensation, financial or otherwise, from my recommendation or link

IMovie and Canon FS100 Camcorder - will they work together?

Hi! A MacUser since 1989, and using a digital camera for stills and videos since 2004 - +but really have done next to nothing with a true "camcorder".+
I'm considering a Canon FS100 camcorder which records onto SD and SDHC cards (but has no internal memory / storage).
*But my concerns are this:*
1. How to transfer from the SD cards to my Mac? (currently 10.4.11 but likely 10.5 in a month or so)
2. If I purchase the camcorder in the USA it is apparently set for NTSC - i.e. I can only play back from the camera to an NTSC television - but I travel in the US, live in Europe (PAL) -- is there no "switch" to choose either the recording or the playback mode (like there is with my iPod Touch- for playback that is).
3. What about "still photos" that I take with the FS100? Are they .jpg files? Can iPhoto handle them?
4. Indeed what about iPhoto: Can it import all the videos and photos from an FS100??
Again, this is all real "new new" to me; and I don't want to buy/carry 2 camcorders (an NTSC and a PAL!!!) --
Any help or reference guides etc really appreciated. The big trip is not tomorrow, so I've got some time here.
Thanks! Steve Schulte
Saturday 2 August 2008 at 17:37

Hi there Stephen,
I feel so lucky that I stumbled into a great file management scheme with my Canon HF100 and I can also report that before that I tried an FS100 and the same procedure for a week before I got this camera. I picked up this method on a thread on MacRumours, I believe.
Without the inconvenience of needing the AC power adapter plugged in to download files direct from the camera, simply use a USB card reader to read directly from the card. The card will mount as a device labeled "Canon" and inside that is a single directory labeled "Private". Inside that is the one you want, labeled "AVCHD". Create a disc image just a little larger than this file and drag the "AVCHD" file over to the disk image. Name the disk image to suit, such as place/date. Both iMovie 08 and FCE recognize the mounted image as a camera and import the footage just fine. Not quite PNP, but this procedure is so smooth that I'm almost surprised that this video n00b could get it going so well If you are in a hurry you can just drag the file to a folder named similar to what you will name the disk image to keep them sorted and do the disk images later on.
I use 8 gig SDHC cards so that I can archive each full card's AVCHD file's disk image on a dual layer DVD. I leave the images on a hard drive as well, but won't be shy about deleting less precious ones and using the DVD's only for storage. The images will mount directly from the DVD and import easily too.
This weekend I upgraded from 10.4.10 to 10.5.4, installed FCE, and was able to mount a disc image and import the files as easily as before.
But of course, you need an Intel Mac do work with the AVCHD files....
Hope this helps!
Cheers!
Glen

The Crew –Racing with Your Coolest MSI Gaming Motherboard and Graphics Card

Most gaming fans are crazy about racing games, and there is a new game title just launched to fulfill gamers’ dream. We want to share with you the experience from Taiwan user who assembles a rig with a brand new MSI Z97 Gaming 5 motherboard and 960 graphics card, along with a hardware and game (The Crew) benchmarks. You may find the original article from:
https://forum-tc.msi.com/index.php?topic=113352.0
The Crew - Launch Trailer
PC configuration:
CPU: Intel i5-4670K
RAM: Avexir DDR3-1600 8G*2
VGA: MSI GTX960 GAMING 2G
SSD: Kingston HyberX 3K SSD 240G
CPU Cooler: SilverStone AR01
The MSI Z97 Gaming 5 motherboard box
Overview of the motherboard: Black and Red color scheme, it’s also the favorite color combination from MSI’s user reservation.
The PCI-E slots and bandwidth are enough for a two-way SLI setting.
Killer Ethernet, outstanding performance on internet access, especially reduce the lag issue.
The new arrival MSI GTX960 GAMING 2G graphics card
New cooling design: ZeroFrozr
The dragon symbol on LED panel
With MSI Gaming series motherboard plus graphics card, you can enable a Gaming App to overclock CPU and GPU. There are 3 modes to choose.
6-month free trail of the XSplit game caster software, free bundled with MSI gaming motherboard and graphics card
Done with assembling, quiet nice color combination and clean cable arrangement.
An overview of the very gaming look system.
Some benchmark results before racing with The Crew.
CPU and GPU info on CPU-Z and GPU-Z applications:
3DMark Fire Strike score: 6441
3DMark Fire Strike Extreme score: 3384
3DMark Fire Strike Ultra score:1262
The excel performance proof the brand new 960 graphics card comes with good a high Cost/Performance Value.
Now, check out this test benchmark score of the renowned game “The Crew”.
The game presents an ultra-quality display, 60 Frames Per Second (FPS)
FPS: Average frames is at:
Frames: 3859 - Time: 76828ms - Avg: 50.229 - Min: 43 - Max: 56
The comments of the game for your reference:
There are many types of missions that can be chosen from the America’s map.
Street racing, high-speed collision, breakaway from police, sky jumps, zigzagging, etc… make the game quite dynamic.
Now, when it comes to multi-player matches, the performance has exceeded expectations. Perhaps, it is the killer Ethernet that’s working the magic. Thus, this game is highly recommended if you have the right rig.
The downside is that the display intricacy is not as refined as GTA V and in addition, the game FPS is limited at 60 FPS. However, the overall gaming flow and performance is better than good.
The user's comment for using MSI Gaming 5 motherboard and 960 graphics card:
(The following commends are translated from user’s article, does not represent the viewpoint of MSI) ^^
Recently, MSI GTX 960 just launched so the initial price tag is still adjustable.
According to the current product line, it seems like this GPU is going to replace 750Ti. So once all the stocks (750Ti) at the store empties, we are most likely to see a price drop on GTX960.
Once the price hits the sweet spot, it’s time to try out GTX960 SLI’s performance.
The CP value on MSI GTX960 and GAMING 5 MB is pretty high. But the XSplit software that comes with the product is a bit annoying since the authentication steps are divided into 2 parts to go through for using it.
Enough said, anyways, GAME ON!

NVIDIA 960 card + GAMING 5 motherboard = best bundle for budget gaming!
it would be nice to see more testing of hardware-demanding games!

I just finished creating a movie in IMovie and now want to burn it to a DVD and make it loop. Since I just purchased this IMac it no longer comes with IDVD. My question is how to burn and loop a dvd without IDVD. Thanks for any help.

I just finished creating a movie using IMovie and want to burn it to a DVD and loop it. Since I just purchased this mac it looks like they no longer include IDVD. Is there something out there to help me do this. I am new to MAC and any help would be greatly appreciated. Thanks

There is free open source software called Burn that will burn DVDs. Here is a link.
If you wish to pay for software, there are many, including TOAST TITANIUM from Roxio. Apple's retail copy of iLife 11, and Apple's Compressor.
Of these, I would say that iDVD is known for being able to create very professional looking DVDs with intros, menus, lots of interesting templates.
Toast is much simpler and the menus and templates are more plain.
Compressor is a professional tool that does a lot more than make DVDs. Don't expect much in the way of menus or templates.
Burn, I have never tried, since I have iDVD and Toast for those ocasions when I need to burn a DVD. However, since it is free, I think it is worth a try.
Each software package is a little different, but in general, in iMovie, you can use the SHARE menu to SHARE/MOVIE in Large size. Save the movie to your desktop or someplace you can easily find it. Then drag it into the tool of your choice. You can alsouse SHARE/MEDIA BROWSER/LARGE if you have iDVD or Toast.

Processor and graphics card upgrade for hp dc5100 MT(EF633US)

Can someone kindly tell me a variety of Intel processors and graphic cards which i can install in my pc coz right now i'm using Intel pentium 4 CPU 2.80 GHz and Intel 82915G/GV/910GL express chipset. but i would like to upgrade to a faster processor and a graphics card which can play games which require large graphic memory (eg FIFA 2013,GTA 5.etc)

Hi:
Personally, I wouldn't invest the money to upgrade that PC.
You would be better off getting an off lease newer dc5800 MT or dc7800/dc7900 model that has a PCIe x16 video slot.
The killer for your model is you can only install a PCI graphics card.
Very inefficient and pretty expensive for what you get in return.
After you install the required microcode update, the best processor I know for sure you can install would be the P4 650.
Below is the link to the quickspecs. The supported processors are listed on page 7.
I do not know of anyone who that has installed the 651 or 661 processors and got them to work--even though the specs state they are supported.
You can try the 651 or 661 and if you do, please let me know if they worked for you.
http://h18000.www1.hp.com/products/quickspecs/12145_ca/12145_ca.pdf

PSU and Video card upgrade for HP e9280t

Hello, I wanted to upgrade my PSU and video card. The PSU I would like to get is the SeaSonic S12II 620 Bronze 620W (http://www.newegg.com/Product/Product.aspx?Item=N82E16817151096&Tpk=17-151-096) but I wasn't sure if my computer could handle and hold the PSU. The video card I would like to get is the EVGA 01G-P3-1561-AR GeForce GTX 560 Ti (http://www.newegg.com/Product/Product.aspx?Item=N82E16814130604) but im not sure if my computer can handle this too. I have a HP Pavilion Elite e9280t CTO Desktop PC (http://h10025.www1.hp.com/ewfrf/wc/product?cc=us&lc=en&dlc=en&product=4066665) can someone please tell me if I can upgrade to the PSU and Video card?

Stuart, welcome to the forum.
The truth is, any video card that will run properly with the 300W PSU in the computer, will not be much better than the integrated video. Most newer mid-level cards require a PSU with a minimum of 400W watts. I have searched for other members many times without any luck. If you want to upgrade the PSU, it will give you far more options.
Please click "KUDOS" if I have helped you and click "Accept as Solution" if your problem is solved.
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee.

J2me and java card, need help to communicate

we are trying to put together a reader to read smartcards using j2me and we figure that it would be easiest if we could develop it to work with java cards rather than standard smart cards, the problem is we get garbage when we communicate to it, the chip sends us crap, any suggestions what might be wrong, any calls we might be missing, has anyone worked with j2me and java cards or smart cards, any help would be appreciated.
einar

.... reader app and the ME behind it .... smells like mobile ....
First of all - if you want to have one mobile application running on this just make sure that whatever is written in ME can use drivers from the reader chip ....
Workin on the PC is something completely different. There was one good example how to develop one host application in Java provided with the JCOP tools long ago ... I don't know if this is now in the new Eclipse tools.
But - there was a small API provided that can give you good hints what to do - and - once you have it on the reader side - you can easily integrate ME methods with this ...

I have a new macbook pro and just made a video on imovie and it asked me to put it on idvd but there is no idvd listed as an option. How can I get idvd?

I have a new macbook pro and just made a video on imovie and it asked me to put it on idvd but there is no idvd listed as an option. How can i get idvd. it doesn't seem available

Since Apple has stopped supporting and offering iDVD you'll need to purchase the iLIfe 11 disk from a 3rd party retailer like Amazon.com: iLife 11 which will include iDVD 7.
OT

Lombard, iMovie and PC Card

Similar Messages

Maybe you are looking for