Long boot due to ata recognition problems [SOLVED]
As the message says my boot is taking about 10 minutes, of which 95% of the time is spent trying to recognize ata4 device.
I'm using the x86_64 version of arch, which works just fine on my laptop, and on my desktop - when it boots that is.
Another thing that puzzles me is how am I getting those errors, considering I don't really have 4 ata drives, yet only two - hard disk and dvd rom.
Anyway, this is my dmesg output :
Linux version 2.6.24-ARCH (root@artin) (gcc version 4.3.0 (GCC) ) #1 SMP PREEMPT Sun Mar 30 10:50:22 CEST 2008
Command line: root=/dev/sda1 ro vga=791
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000007fee0000 (usable)
BIOS-e820: 000000007fee0000 - 000000007fee3000 (ACPI NVS)
BIOS-e820: 000000007fee3000 - 000000007fef0000 (ACPI data)
BIOS-e820: 000000007fef0000 - 000000007ff00000 (reserved)
BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
Entering add_active_range(0, 0, 159) 0 entries of 256 used
Entering add_active_range(0, 256, 524000) 1 entries of 256 used
end_pfn_map = 1048576
DMI 2.4 present.
ACPI: RSDP 000F9210, 0014 (r0 IntelR)
ACPI: RSDT 7FEE3040, 003C (r1 IntelR AWRDACPI 42302E31 AWRD 0)
ACPI: FACP 7FEE30C0, 0074 (r1 IntelR AWRDACPI 42302E31 AWRD 0)
ACPI: DSDT 7FEE3180, 4BB6 (r1 INTELR AWRDACPI 1000 MSFT 100000E)
ACPI: FACS 7FEE0000, 0040
ACPI: HPET 7FEE7E80, 0038 (r1 IntelR AWRDACPI 42302E31 AWRD 98)
ACPI: MCFG 7FEE7F00, 003C (r1 IntelR AWRDACPI 42302E31 AWRD 0)
ACPI: APIC 7FEE7D80, 0084 (r1 IntelR AWRDACPI 42302E31 AWRD 0)
ACPI: SSDT 7FEE7F80, 015C (r1 PmRef Cpu0Ist 3000 INTL 20060912)
ACPI: SSDT 7FEE8410, 02F1 (r1 PmRef CpuPm 3000 INTL 20040311)
Entering add_active_range(0, 0, 159) 0 entries of 256 used
Entering add_active_range(0, 256, 524000) 1 entries of 256 used
Zone PFN ranges:
DMA 0 -> 4096
DMA32 4096 -> 1048576
Normal 1048576 -> 1048576
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
0: 0 -> 159
0: 256 -> 524000
On node 0 totalpages: 523903
DMA zone: 56 pages used for memmap
DMA zone: 1354 pages reserved
DMA zone: 2589 pages, LIFO batch:0
DMA32 zone: 7108 pages used for memmap
DMA32 zone: 512796 pages, LIFO batch:31
Normal zone: 0 pages used for memmap
Movable zone: 0 pages used for memmap
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 (Bootup-CPU)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
Processor #1
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 4, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Setting APIC routing to flat
ACPI: HPET id: 0x10b9a201 base: 0xfed00000
Using ACPI (MADT) for SMP configuration information
swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000f0000
swsusp: Registered nosave memory region: 00000000000f0000 - 0000000000100000
Allocating PCI resources starting at 80000000 (gap: 7ff00000:60100000)
SMP: Allowing 4 CPUs, 2 hotplug CPUs
PERCPU: Allocating 33200 bytes of per cpu data
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 515385
Kernel command line: root=/dev/sda1 ro vga=791
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 32768 bytes)
hpet clockevent registered
TSC calibrated against HPET
time.c: Detected 2395.908 MHz processor.
Console: colour dummy device 80x25
console [tty0] enabled
Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
Checking aperture...
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 2057296k/2096000k available (2958k kernel code, 38092k reserved, 1092k data, 248k init)
SLUB: Genslabs=11, HWalign=64, Order=0-1, MinObjects=4, CPUs=4, Nodes=1
Calibrating delay using timer specific routine.. 4796.31 BogoMIPS (lpj=7990897)
Security Framework initialized
Capability LSM initialized
Mount-cache hash table entries: 256
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 4096K
using mwait in idle threads.
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
CPU0: Thermal monitoring enabled (TM1)
SMP alternatives: switching to UP code
Early unpacking initramfs... done
ACPI: Core revision 20070126
ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
Using local APIC timer interrupts.
APIC timer calibration result 16638250
Detected 16.638 MHz APIC timer.
SMP alternatives: switching to SMP code
Booting processor 1/2 APIC 0x1
Initializing CPU#1
Calibrating delay using timer specific routine.. 4793.45 BogoMIPS (lpj=7986329)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 4096K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
CPU1: Thermal monitoring enabled (TM2)
Intel(R) Core(TM)2 CPU 6600 @ 2.40GHz stepping 06
checking TSC synchronization [CPU#0 -> CPU#1]: passed.
Brought up 2 CPUs
net_namespace: 120 bytes
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: Using MMCONFIG at e0000000 - efffffff
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO
PCI quirk: region 0480-04bf claimed by ICH6 GPIO
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 *10 11 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 *10 11 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 *5 7 9 10 11 14 15)
ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 7 *9 10 11 14 15)
ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 7 9 10 11 14 15) *0, disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 16 devices
ACPI: ACPI bus type pnp unregistered
SCSI subsystem initialized
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
PCI-GART: No AMD northbridge found.
ACPI: RTC can wake from S4
Time: tsc clocksource has been installed.
system 00:01: ioport range 0x4d0-0x4d1 has been reserved
system 00:01: ioport range 0xa00-0xa7f has been reserved
system 00:01: ioport range 0x880-0x88f has been reserved
system 00:0c: ioport range 0x400-0x4bf could not be reserved
system 00:0e: iomem range 0xe0000000-0xefffffff could not be reserved
system 00:0f: iomem range 0xf0000-0xfffff could not be reserved
system 00:0f: iomem range 0xfed00000-0xfed000ff has been reserved
system 00:0f: iomem range 0x7fee0000-0x7fefffff could not be reserved
system 00:0f: iomem range 0x0-0x9ffff could not be reserved
system 00:0f: iomem range 0x100000-0x7fedffff could not be reserved
system 00:0f: iomem range 0xfec00000-0xfec00fff has been reserved
system 00:0f: iomem range 0xfed14000-0xfed1dfff has been reserved
system 00:0f: iomem range 0xfed20000-0xfed9ffff has been reserved
system 00:0f: iomem range 0xfee00000-0xfee00fff could not be reserved
system 00:0f: iomem range 0xffb00000-0xffb7ffff has been reserved
system 00:0f: iomem range 0xfff00000-0xffffffff has been reserved
system 00:0f: iomem range 0xe0000-0xeffff has been reserved
PCI: Bridge: 0000:00:01.0
IO window: d000-dfff
MEM window: fa000000-fcffffff
PREFETCH window: d0000000-dfffffff
PCI: Bridge: 0000:00:1c.0
IO window: b000-bfff
MEM window: fdb00000-fdbfffff
PREFETCH window: fdc00000-fdcfffff
PCI: Bridge: 0000:00:1e.0
IO window: c000-cfff
MEM window: fde00000-fdefffff
PREFETCH window: fdd00000-fddfffff
ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:01.0 to 64
ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1c.0 to 64
PCI: Setting latency timer of device 0000:00:1e.0 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP reno registered
checking if image is initramfs... it is
Freeing initrd memory: 690k freed
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
Installing knfsd (copyright (C) 1996 [email protected]).
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
Boot video device is 0000:01:00.0
PCI: Setting latency timer of device 0000:00:01.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:01.0:pcie00]
Allocate Port Service[0000:00:01.0:pcie03]
PCI: Setting latency timer of device 0000:00:1c.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.0:pcie00]
Allocate Port Service[0000:00:1c.0:pcie02]
Allocate Port Service[0000:00:1c.0:pcie03]
vesafb: framebuffer at 0xd0000000, mapped to 0xffffc20010100000, using 3072k, total 262144k
vesafb: mode is 1024x768x16, linelength=2048, pages=1
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
Console: switching to colour frame buffer device 128x48
fb0: VESA VGA frame buffer device
Linux agpgart interface v0.102
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
loop: module loaded
input: Macintosh mouse button emulation as /devices/virtual/input/input0
PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
serio: i8042 KBD port at 0x60,0x64 irq 1
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
cpuidle: using governor ladder
cpuidle: using governor menu
TCP cubic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
Freeing unused kernel memory: 248k freed
libata version 3.00 loaded.
PCI: Enabling device 0000:02:00.1 (0000 -> 0001)
ACPI: PCI Interrupt 0000:02:00.1[b] -> GSI 17 (level, low) -> IRQ 17
Switched to high resolution mode on CPU 1
PCI: Setting latency timer of device 0000:02:00.1 to 64
scsi0 : pata_jmicron
Switched to high resolution mode on CPU 0
scsi1 : pata_jmicron
ata1: PATA max UDMA/100 cmd 0xbf00 ctl 0xbe00 bmdma 0xbb00 irq 17
ata2: PATA max UDMA/100 cmd 0xbd00 ctl 0xbc00 bmdma 0xbb08 irq 17
ata1.00: ATA-7: ST3200826A, 3.06, max UDMA/100
ata1.00: 390721968 sectors, multi 0: LBA48
ata1.01: ATAPI: HL-DT-ST DVDRAM GSA-4120B, A101, max UDMA/33
ata1.00: configured for UDMA/100
ata1.01: configured for UDMA/33
scsi 0:0:0:0: Direct-Access ATA ST3200826A 3.06 PQ: 0 ANSI: 5
scsi 0:0:1:0: CD-ROM HL-DT-ST DVDRAM GSA-4120B A101 PQ: 0 ANSI: 5
ahci 0000:02:00.0: version 3.0
ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 16
ahci 0000:02:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
ahci 0000:02:00.0: flags: 64bit ncq pm led clo pmp pio slum part
PCI: Setting latency timer of device 0000:02:00.0 to 64
scsi2 : ahci
scsi3 : ahci
ata3: SATA max UDMA/133 abar m8192@0xfdbfe000 port 0xfdbfe100 irq 16
ata4: SATA max UDMA/133 abar m8192@0xfdbfe000 port 0xfdbfe180 irq 16
ata3: SATA link down (SStatus 0 SControl 300)
ata4: classification failed
ata4: reset failed (errno=-22), retrying in 8 secs
ata4: classification failed
ata4: reset failed (errno=-22), retrying in 10 secs
ata4: classification failed
ata4: reset failed (errno=-22), retrying in 35 secs
ata4: limiting SATA link speed to 1.5 Gbps
ata4: classfication failed, assuming ATA
ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 310)
ata4.00: qc timeout (cmd 0xec)
ata4.00: failed to IDENTIFY (I/O error, err_mask=0x4)
ata4: failed to recover some devices, retrying in 5 secs
ata4: classification failed
ata4: reset failed (errno=-22), retrying in 10 secs
ata4: classification failed
ata4: reset failed (errno=-22), retrying in 10 secs
ata4: classification failed
ata4: reset failed (errno=-22), retrying in 35 secs
ata4: classfication failed, assuming ATA
ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 310)
ata4.00: qc timeout (cmd 0xec)
ata4.00: failed to IDENTIFY (I/O error, err_mask=0x4)
ata4: failed to recover some devices, retrying in 5 secs
ata4: classification failed
ata4: reset failed (errno=-22), retrying in 10 secs
ata4: classification failed
ata4: reset failed (errno=-22), retrying in 10 secs
ata4: classification failed
ata4: reset failed (errno=-22), retrying in 35 secs
ata4: classfication failed, assuming ATA
ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 310)
ata4.00: qc timeout (cmd 0xec)
ata4.00: failed to IDENTIFY (I/O error, err_mask=0x4)
ata4: failed to recover some devices, retrying in 5 secs
ata4: classification failed
ata4: reset failed (errno=-22), retrying in 10 secs
ata4: classification failed
ata4: reset failed (errno=-22), retrying in 10 secs
ata4: classification failed
ata4: reset failed (errno=-22), retrying in 35 secs
ata4: classfication failed, assuming ATA
ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 310)
ata_piix 0000:00:1f.2: version 2.12
ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
ACPI: PCI Interrupt 0000:00:1f.2[b] -> GSI 19 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:00:1f.2 to 64
scsi4 : ata_piix
scsi5 : ata_piix
ata5: SATA max UDMA/133 cmd 0xfa00 ctl 0xf900 bmdma 0xf600 irq 19
ata6: SATA max UDMA/133 cmd 0xf800 ctl 0xf700 bmdma 0xf608 irq 19
ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
ACPI: PCI Interrupt 0000:00:1f.5[b] -> GSI 19 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:00:1f.5 to 64
scsi6 : ata_piix
scsi7 : ata_piix
ata7: SATA max UDMA/133 cmd 0xf300 ctl 0xf200 bmdma 0xef00 irq 19
ata8: SATA max UDMA/133 cmd 0xf100 ctl 0xf000 bmdma 0xef08 irq 19
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
USB Universal Host Controller Interface driver v3.0
ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1a.0 to 64
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000ff00
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1a.1[b] -> GSI 21 (level, low) -> IRQ 21
PCI: Setting latency timer of device 0000:00:1a.1 to 64
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000fe00
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000fd00
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.1[b] -> GSI 19 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000fc00
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000fb00
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:00:1a.7 to 64
ehci_hcd 0000:00:1a.7: EHCI Host Controller
ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 6
PCI: cache line size of 32 is not supported by device 0000:00:1a.7
ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfdfff000
usb 4-1: new low speed USB device using uhci_hcd and address 2
ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb6: configuration #1 chosen from 1 choice
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 4 ports detected
ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 7
PCI: cache line size of 32 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfdffe000
usb 4-1: string descriptor 0 read error: -71
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb7: configuration #1 chosen from 1 choice
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 6 ports detected
usb 4-1: string descriptor 0 read error: -71
usb 4-1: configuration #1 chosen from 1 choice
usb 4-1: can't set config #1, error -71
usb 4-1: USB disconnect, address 2
Driver 'sd' needs updating - please use bus_type methods
sd 0:0:0:0: [sda] 390721968 512-byte hardware sectors (200050 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Driver 'sr' needs updating - please use bus_type methods
sd 0:0:0:0: [sda] 390721968 512-byte hardware sectors (200050 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3
sd 0:0:0:0: [sda] Attached SCSI disk
sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 0:0:1:0: Attached scsi CD-ROM sr0
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
usb 4-1: new low speed USB device using uhci_hcd and address 3
usb 4-1: configuration #1 chosen from 1 choice
rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month
r8169 Gigabit Ethernet driver 2.2LK loaded
ACPI: PCI Interrupt 0000:03:06.0[A] -> GSI 21 (level, low) -> IRQ 21
eth0: RTL8169sc/8110sc at 0xffffc20000024000, 00:16:17:b2:2b:11, XID 18000000 IRQ 21
ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 22
PCI: Setting latency timer of device 0000:00:1b.0 to 64
hda_codec: Unknown model for ALC883, trying auto-probe from BIOS...
input: Power Button (FF) as /devices/virtual/input/input2
ACPI: Power Button (FF) [PWRF]
input: Power Button (CM) as /devices/virtual/input/input3
ACPI: Power Button (CM) [PWRB]
ACPI: Fan [FAN] (on)
ACPI: SSDT 7FEE8380, 0087 (r1 PmRef Cpu1Ist 3000 INTL 20060912)
ACPI Exception (processor_core-0816): AE_NOT_FOUND, Processor Device is not present [20070126]
ACPI Exception (processor_core-0816): AE_NOT_FOUND, Processor Device is not present [20070126]
ACPI: Thermal Zone [THRM] (43 C)
sd 0:0:0:0: Attached scsi generic sg0 type 0
sr 0:0:1:0: Attached scsi generic sg1 type 5
ACPI: PCI Interrupt 0000:00:1f.3[b] -> GSI 19 (level, low) -> IRQ 19
nvidia: module license 'NVIDIA' taints kernel.
PPP generic driver version 2.4.2
usbcore: registered new interface driver hiddev
input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1d.1/usb4/4-1/4-1:1.0/input/input4
lp: driver loaded but no devices found
input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.1-1
usbcore: registered new interface driver usbhid
drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
ppdev: user-space parallel port driver
ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:01:00.0 to 64
NVRM: loading NVIDIA UNIX x86_64 Kernel Module 169.12 Thu Feb 14 17:51:09 PST 2008
parport_pc 00:0a: reported by Plug and Play ACPI
parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
lp0: using parport0 (interrupt-driven).
EXT3 FS on sda1, internal journal
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda2, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
Adding 29294516k swap on /dev/sda3. Priority:-1 extents:1 across:29294516k
r8169: eth0: link up
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
eth0: no IPv6 routers present
That's the entire code, the part on which it holds on is :
ata4: classification failed
ata4: reset failed (errno=-22), retrying in 8 secs
ata4: classification failed
ata4: reset failed (errno=-22), retrying in 10 secs
ata4: classification failed
ata4: reset failed (errno=-22), retrying in 35 secs
ata4: limiting SATA link speed to 1.5 Gbps
ata4: classfication failed, assuming ATA
ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 310)
ata4.00: qc timeout (cmd 0xec)
ata4.00: failed to IDENTIFY (I/O error, err_mask=0x4)
ata4: failed to recover some devices, retrying in 5 secs
ata4: classification failed
ata4: reset failed (errno=-22), retrying in 10 secs
ata4: classification failed
ata4: reset failed (errno=-22), retrying in 10 secs
ata4: classification failed
ata4: reset failed (errno=-22), retrying in 35 secs
ata4: classfication failed, assuming ATA
ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 310)
ata4.00: qc timeout (cmd 0xec)
ata4.00: failed to IDENTIFY (I/O error, err_mask=0x4)
ata4: failed to recover some devices, retrying in 5 secs
ata4: classification failed
ata4: reset failed (errno=-22), retrying in 10 secs
ata4: classification failed
ata4: reset failed (errno=-22), retrying in 10 secs
ata4: classification failed
ata4: reset failed (errno=-22), retrying in 35 secs
ata4: classfication failed, assuming ATA
ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 310)
ata4.00: qc timeout (cmd 0xec)
ata4.00: failed to IDENTIFY (I/O error, err_mask=0x4)
ata4: failed to recover some devices, retrying in 5 secs
ata4: classification failed
ata4: reset failed (errno=-22), retrying in 10 secs
ata4: classification failed
ata4: reset failed (errno=-22), retrying in 10 secs
ata4: classification failed
ata4: reset failed (errno=-22), retrying in 35 secs
ata4: classfication failed, assuming ATA
ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 310)
ata_piix 0000:00:1f.2: version 2.12
ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
Also I might add that on my first boot it didn't go this slow - I can't remember if I got the error or not though since I didn't pay attention.
I don't think it's necessarily a hardware issue, even though this PC had it's issues with linux - had to flash my bios just so grub would detect hard drives, this doesn't seem like one of those.
At least, I think it isn't since Mandriva booted just fine, and I don't think it's using a different kernel or some such, is it? Altough it was 32bit, but still, I find this quite odd.
Now if this really is an error, not just buggy software, is there a way to ignore the error - I mean it boots up eventually anyway, just takes a hell of a lot of time.
Last edited by gajo (2008-06-20 10:12:52)
I'm going to bring up this issue again, still haven't fixed it and it remains unsolved with the newest kernel.
The following links seem to have the same issue:
http://www.ubuntu-forum.net/showthread.php?t=765486
http://www.slackwarehelp.org/post-6750. … 194ecb9f80
http://www.archlinux.it/forum/viewtopic.php?pid=11632
http://www.linuxquestions.org/questions … 26-644368/
Some of those threads link to this one as well, pretty much all seem to be unresolved or lack any given solution.
One thing I noticed though, it seems that in nearly all cases the users report to have an MSI motherboard, coincidence? Hope so.
Any clues on how one might fix this? Facts are, the kernel boots eventually, always, and it works like there is no problem; the issue is that it takes it's time, about 5-10 times the amount it would be normally (or before 2.6.x). Note that in the old kernel the delay was only about 5 seconds or less, with just one error message.
Also, it seems to boot just fine in Windows, bit sad that Windows seems more stable/reliable eh?
So where to next? I really want to fix this. It seems Google can't spit out the solution, should I report a bug to the kernel devs and pray that they look it up? Or perhaps it might be feasible to just change the source code of the kernel so it doesn't try 4 times for 10, 10, 30 seconds yet only once for 1 second? Surely it would be a matter of a simple for loop, just a matter of finding it!
Please, even if you ain't got a solution to the particular issue, at least give me(and the people who google for the problem since this thread seems to be topping the results) an advice on what approach to take next, I'm fairly sure that everything can be fixed with common sense and a bit of C knowledge, only thing that's needed is a bit of experience.
Similar Messages
-
H8-1414 does not boot due to bios update problem
Hi, I did a BIOS update on my desktop last night , now it does not boot up and the motherboard send 8 long beeps with no video output. It seems that 8 beeps correspond to motherboard BIOS problem I was pressing ESC and F10 keys to enter Bios settings but no luck...always 8 beeps and no video. Need to access BIOS setting on the screen or do BIOS reset but don't know how to do it on this case. Any help ?...Thanks! HP ENVY H8-1414M3970CM MotherboardAMD FX-6120 , 8 GB RAMAMD RADEON HD7450 VIDEO
Hi buddy,
You should check the forum content or with other words, use the forum search firstly before you ask something. Failed BIOS update is not unusual and can happen always. The forum contains already a lot threads about this and the only solution is contacting an ASP. The guys have professional tools to recover it.
The same question was asked here:
http://forums.computers.toshiba-europe.com/forums//thread.jspa?threadID=53366 -
MBP won't boot due to hard disk problem
I have a late 2008 which just started to have problems booting up.
The trouble started a week ago, when my MBP would shut down unexpectedly while I'm working(on battery power). When I tried to reboot from battery power it didn't work. However, it's not the issue of low battery level. I had plenty juice in the battery. So I attached to the mag safe power supply, it would boot up again.
On yesterday morning after another unexpected shut down, I plugged the mag saft back in and hope it would boot up again. Never again. It will alwasy stuck at the gray screen with a spinning circle. So I did quite a few standard checks such as booting from Snow Leopard install DVD, and run DiskUtility. It tells me my MBP Hard Drive has problems and can not be repaired. So I figure it's the HD problem. Now I just want to salvage some data off from that HD, get a new HD and start over again.
I tried to boot from DiskWarrior 4.2 DVD, it didn't boot up. It boot up fine with Snow Leopard DVD. So the optical drive works fine.
The HD is the Hitachi 7200rpm travelstar 250GB.
Any advice?I totally agree with making a Super Duper copy of the drive before proceeding with anything else--that creates an exact copy of the problem drive so that everything is preserved. It would also create a duplicate that could be used to experiment with.
One way to do this is to get the replacement drive for the MBP and place it in an enclosure, maybe even using one of OWC's kits. The MBP's drive is already mounted on the Mac Pro's desktop, and the new drive in the enclosure can also be mounted on the MacPro's desktop and properly formatted using Disk Utility. Then Super Duper can be launched and used to copy the MBP's drive to the new drive. Once that's done, the OS could be reinstalled on the new drive and we would be able to see if that cured the password problem. Since Super Duper can make a bootable clone, we could see if the MBP would boot from it by plugging it into a MBP port and trying an option boot. If everything works, you can just install the new drive in the MBP.
Doing something like this does not touch the original MBP drive and its contents, so everything is preserved.
Just about any external drive would work for this purpose--it doesn't necessarily need to be the one that you intend to use as a replacement.
I agree that we don't really know for certain just what the fault is, but I think a Super Duper copy would be in order no matter how we go about doing the troubleshooting. -
[solved] Long boot time because of NetworkManager.service
Hello. It seems that my ASUS N56V latptop takes a long time to boot. systemd-analyze reports this:
Startup finished in 742ms (kernel) + 3.094s (initrd) + 23.838s (userspace) = 27.675s
└──[4]──╼ systemd-analyze blame
12.083s NetworkManager.service
11.247s accounts-daemon.service
1.137s home-sergio-Disco_Duro.mount
735ms systemd-vconsole-setup.service
710ms systemd-udev-trigger.service
631ms systemd-tmpfiles-setup.service
630ms dev-hugepages.mount
628ms lm_sensors.service
626ms systemd-logind.service
515ms dev-mqueue.mount
515ms sys-kernel-debug.mount
440ms systemd-tmpfiles-setup-dev.service
432ms ufw.service
380ms dev-sda5.swap
365ms [email protected]
356ms gdm.service
356ms systemd-udevd.service
356ms systemd-binfmt.service
353ms systemd-sysctl.service
341ms systemd-readahead-replay.service
340ms systemd-readahead-collect.service
293ms tmp.mount
274ms colord.service
267ms alsa-restore.service
266ms cpupower.service
259ms upower.service
226ms kmod-static-nodes.service
79ms systemd-random-seed.service
66ms proc-sys-fs-binfmt_misc.mount
60ms systemd-remount-fs.service
59ms [email protected]
58ms udisks2.service
44ms [email protected]
30ms sys-kernel-config.mount
10ms polkit.service
6ms systemd-journal-flush.service
5ms [email protected]
4ms systemd-update-utmp.service
4ms systemd-backlight@leds:asus::kbd_backlight.service
2ms wpa_supplicant.service
2ms rtkit-daemon.service
2ms systemd-backlight@backlight:intel_backlight.service
2ms [email protected]
1ms [email protected]
1ms systemd-user-sessions.service
1ms systemd-readahead-done.service
1ms sys-fs-fuse-connections.mount
└──[14]──╼ systemd-analyze critical-chain
The time after the unit is active or started is printed after the "@" character.
The time the unit takes to start is printed after the "+" character.
graphical.target @23.838s
└─multi-user.target @23.838s
└─NetworkManager.service @11.755s +12.083s
└─basic.target @11.753s
└─timers.target @11.753s
└─systemd-tmpfiles-clean.timer @11.752s
└─sysinit.target @11.719s
└─systemd-update-utmp.service @11.712s +4ms
└─systemd-tmpfiles-setup.service @11.079s +631ms
└─local-fs.target @11.076s
└─home-sergio-Disco_Duro.mount @9.938s +1.137s
└─[email protected] @9.498s +365ms
└─dev-sda6.device @9.497s
And dmesg reports this:
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.16.2-1-ARCH (nobody@var-lib-archbuild-testing-x86_64-tobias) (gcc version 4.9.1 (GCC) ) #1 SMP PREEMPT Sat Sep 6 13:12:51 CEST 2014
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=9da38127-36ed-47e5-ba97-e9656af3801b rw quiet splash rw
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000020200000-0x0000000040003fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000040004000-0x0000000040004fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000040005000-0x00000000ad7a8fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000ad7a9000-0x00000000adda9fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000addaa000-0x00000000addacfff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000addad000-0x00000000addc2fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000addc3000-0x00000000addc8fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000addc9000-0x00000000addcafff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000addcb000-0x00000000addd4fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000addd5000-0x00000000adf2bfff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000adf2c000-0x00000000adf2ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000adf30000-0x00000000adf79fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000adf7a000-0x00000000adf9ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000adfa0000-0x00000000adfa2fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000adfa3000-0x00000000adfa4fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000adfa5000-0x00000000adfbbfff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000adfbc000-0x00000000adfc1fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000adfc2000-0x00000000adfc9fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000adfca000-0x00000000adfcafff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000adfcb000-0x00000000adfd9fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000adfda000-0x00000000adfdafff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000adfdb000-0x00000000adfe5fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000adfe6000-0x00000000adfeafff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000adfeb000-0x00000000ae016fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000ae017000-0x00000000ae017fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ae018000-0x00000000ae027fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000ae028000-0x00000000ae04efff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ae04f000-0x00000000ae061fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000ae062000-0x00000000ae062fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ae063000-0x00000000ae063fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000ae064000-0x00000000ae065fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ae066000-0x00000000ae066fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000ae067000-0x00000000ae06bfff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ae06c000-0x00000000ae082fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000ae083000-0x00000000ae626fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ae627000-0x00000000ae8a6fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000ae8a7000-0x00000000ae8abfff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000ae8ac000-0x00000000ae8acfff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000ae8ad000-0x00000000ae8effff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000ae8f0000-0x00000000aecfefff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000aecff000-0x00000000aeff3fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000aeff4000-0x00000000aeffffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000afc00000-0x00000000cfdfffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000001af1fffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: ASUSTeK COMPUTER INC. N56VB/N56VB, BIOS N56VB.202 01/21/2013
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] e820: last_pfn = 0x1af200 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-E7FFF uncachable
[ 0.000000] E8000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F00000000 write-back
[ 0.000000] 1 base 100000000 mask F80000000 write-back
[ 0.000000] 2 base 180000000 mask FC0000000 write-back
[ 0.000000] 3 base 0C0000000 mask FC0000000 uncachable
[ 0.000000] 4 base 0B0000000 mask FF0000000 uncachable
[ 0.000000] 5 base 0AFC00000 mask FFFC00000 uncachable
[ 0.000000] 6 base 1B0000000 mask FF0000000 uncachable
[ 0.000000] 7 base 1AF800000 mask FFF800000 uncachable
[ 0.000000] 8 base 1AF400000 mask FFFC00000 uncachable
[ 0.000000] 9 base 1AF200000 mask FFFE00000 uncachable
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820: update [mem 0xafc00000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0xaf000 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000fd7f0-0x000fd7ff] mapped at [ffff8800000fd7f0]
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x01b23000, 0x01b23fff] PGTABLE
[ 0.000000] BRK [0x01b24000, 0x01b24fff] PGTABLE
[ 0.000000] BRK [0x01b25000, 0x01b25fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x1af000000-0x1af1fffff]
[ 0.000000] [mem 0x1af000000-0x1af1fffff] page 2M
[ 0.000000] BRK [0x01b26000, 0x01b26fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x1ac000000-0x1aeffffff]
[ 0.000000] [mem 0x1ac000000-0x1aeffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x180000000-0x1abffffff]
[ 0.000000] [mem 0x180000000-0x1abffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0x1fffffff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x1fffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x20200000-0x40003fff]
[ 0.000000] [mem 0x20200000-0x3fffffff] page 2M
[ 0.000000] [mem 0x40000000-0x40003fff] page 4k
[ 0.000000] BRK [0x01b27000, 0x01b27fff] PGTABLE
[ 0.000000] BRK [0x01b28000, 0x01b28fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x40005000-0xad7a8fff]
[ 0.000000] [mem 0x40005000-0x401fffff] page 4k
[ 0.000000] [mem 0x40200000-0xad5fffff] page 2M
[ 0.000000] [mem 0xad600000-0xad7a8fff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xaddad000-0xaddc2fff]
[ 0.000000] [mem 0xaddad000-0xaddc2fff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xaddc9000-0xaddcafff]
[ 0.000000] [mem 0xaddc9000-0xaddcafff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xaddd5000-0xadf2bfff]
[ 0.000000] [mem 0xaddd5000-0xadf2bfff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xadf30000-0xadf79fff]
[ 0.000000] [mem 0xadf30000-0xadf79fff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xadfa0000-0xadfa2fff]
[ 0.000000] [mem 0xadfa0000-0xadfa2fff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xadfa5000-0xadfbbfff]
[ 0.000000] [mem 0xadfa5000-0xadfbbfff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xadfc2000-0xadfc9fff]
[ 0.000000] [mem 0xadfc2000-0xadfc9fff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xadfcb000-0xadfd9fff]
[ 0.000000] [mem 0xadfcb000-0xadfd9fff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xadfdb000-0xadfe5fff]
[ 0.000000] [mem 0xadfdb000-0xadfe5fff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xadfeb000-0xae016fff]
[ 0.000000] [mem 0xadfeb000-0xae016fff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xae018000-0xae027fff]
[ 0.000000] [mem 0xae018000-0xae027fff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xae04f000-0xae061fff]
[ 0.000000] [mem 0xae04f000-0xae061fff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xae063000-0xae063fff]
[ 0.000000] [mem 0xae063000-0xae063fff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xae066000-0xae066fff]
[ 0.000000] [mem 0xae066000-0xae066fff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xae06c000-0xae082fff]
[ 0.000000] [mem 0xae06c000-0xae082fff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xae8ac000-0xae8acfff]
[ 0.000000] [mem 0xae8ac000-0xae8acfff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xae8f0000-0xaecfefff]
[ 0.000000] [mem 0xae8f0000-0xae9fffff] page 4k
[ 0.000000] [mem 0xaea00000-0xaebfffff] page 2M
[ 0.000000] [mem 0xaec00000-0xaecfefff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xaeff4000-0xaeffffff]
[ 0.000000] [mem 0xaeff4000-0xaeffffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x17fffffff]
[ 0.000000] [mem 0x100000000-0x17fffffff] page 2M
[ 0.000000] RAMDISK: [mem 0x3757a000-0x37ab4fff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000F0490 000024 (v02 _ASUS_)
[ 0.000000] ACPI: XSDT 0x00000000AE879078 00007C (v01 _ASUS_ Notebook 01072009 AMI 00010013)
[ 0.000000] ACPI: FACP 0x00000000AE88CAE0 00010C (v05 _ASUS_ Notebook 01072009 AMI 00010013)
[ 0.000000] ACPI: DSDT 0x00000000AE879188 013957 (v02 _ASUS_ Notebook 00000013 INTL 20091112)
[ 0.000000] ACPI: FACS 0x00000000AE8A4080 000040
[ 0.000000] ACPI: APIC 0x00000000AE88CBF0 000072 (v03 _ASUS_ Notebook 01072009 AMI 00010013)
[ 0.000000] ACPI: FPDT 0x00000000AE88CC68 000044 (v01 _ASUS_ Notebook 01072009 AMI 00010013)
[ 0.000000] ACPI: ECDT 0x00000000AE88CCB0 0000C1 (v01 _ASUS_ Notebook 01072009 AMI. 00000005)
[ 0.000000] ACPI: MCFG 0x00000000AE88CD78 00003C (v01 _ASUS_ Notebook 01072009 MSFT 00000097)
[ 0.000000] ACPI: HPET 0x00000000AE88CDB8 000038 (v01 _ASUS_ Notebook 01072009 AMI. 00000005)
[ 0.000000] ACPI: SSDT 0x00000000AE88CDF0 000632 (v01 AhciR1 AhciTab1 00001000 INTL 20091112)
[ 0.000000] ACPI: SSDT 0x00000000AE88D428 00049E (v01 AhciR2 AhciTab2 00001000 INTL 20091112)
[ 0.000000] ACPI: SSDT 0x00000000AE88D8C8 0009D0 (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
[ 0.000000] ACPI: SSDT 0x00000000AE88E298 000B18 (v01 PmRef CpuPm 00003000 INTL 20051117)
[ 0.000000] ACPI: MSDM 0x00000000AE626E18 000055 (v03 _ASUS_ Notebook 00000000 ASUS 00000001)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x00000001af1fffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x1af1fffff]
[ 0.000000] NODE_DATA [mem 0x1af1f1000-0x1af1f5fff]
[ 0.000000] [ffffea0000000000-ffffea0006bfffff] PMD -> [ffff8801a9000000-ffff8801ae7fffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x1af1fffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009cfff]
[ 0.000000] node 0: [mem 0x00100000-0x1fffffff]
[ 0.000000] node 0: [mem 0x20200000-0x40003fff]
[ 0.000000] node 0: [mem 0x40005000-0xad7a8fff]
[ 0.000000] node 0: [mem 0xaddad000-0xaddc2fff]
[ 0.000000] node 0: [mem 0xaddc9000-0xaddcafff]
[ 0.000000] node 0: [mem 0xaddd5000-0xadf2bfff]
[ 0.000000] node 0: [mem 0xadf30000-0xadf79fff]
[ 0.000000] node 0: [mem 0xadfa0000-0xadfa2fff]
[ 0.000000] node 0: [mem 0xadfa5000-0xadfbbfff]
[ 0.000000] node 0: [mem 0xadfc2000-0xadfc9fff]
[ 0.000000] node 0: [mem 0xadfcb000-0xadfd9fff]
[ 0.000000] node 0: [mem 0xadfdb000-0xadfe5fff]
[ 0.000000] node 0: [mem 0xadfeb000-0xae016fff]
[ 0.000000] node 0: [mem 0xae018000-0xae027fff]
[ 0.000000] node 0: [mem 0xae04f000-0xae061fff]
[ 0.000000] node 0: [mem 0xae063000-0xae063fff]
[ 0.000000] node 0: [mem 0xae066000-0xae066fff]
[ 0.000000] node 0: [mem 0xae06c000-0xae082fff]
[ 0.000000] node 0: [mem 0xae8ac000-0xae8acfff]
[ 0.000000] node 0: [mem 0xae8f0000-0xaecfefff]
[ 0.000000] node 0: [mem 0xaeff4000-0xaeffffff]
[ 0.000000] node 0: [mem 0x100000000-0x1af1fffff]
[ 0.000000] On node 0 totalpages: 1428925
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3996 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 11057 pages used for memmap
[ 0.000000] DMA32 zone: 707617 pages, LIFO batch:31
[ 0.000000] Normal zone: 11208 pages used for memmap
[ 0.000000] Normal zone: 717312 pages, LIFO batch:31
[ 0.000000] Reserving Intel graphics stolen memory at 0xafe00000-0xcfdfffff
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x20000000-0x201fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x40004000-0x40004fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xad7a9000-0xadda9fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xaddaa000-0xaddacfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xaddc3000-0xaddc8fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xaddcb000-0xaddd4fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xadf2c000-0xadf2ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xadf7a000-0xadf9ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xadfa3000-0xadfa4fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xadfbc000-0xadfc1fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xadfca000-0xadfcafff]
[ 0.000000] PM: Registered nosave memory: [mem 0xadfda000-0xadfdafff]
[ 0.000000] PM: Registered nosave memory: [mem 0xadfe6000-0xadfeafff]
[ 0.000000] PM: Registered nosave memory: [mem 0xae017000-0xae017fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xae028000-0xae04efff]
[ 0.000000] PM: Registered nosave memory: [mem 0xae062000-0xae062fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xae064000-0xae065fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xae067000-0xae06bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xae083000-0xae626fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xae627000-0xae8a6fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xae8a7000-0xae8abfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xae8ad000-0xae8effff]
[ 0.000000] PM: Registered nosave memory: [mem 0xaecff000-0xaeff3fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xaf000000-0xafbfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xafc00000-0xcfdfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcfe00000-0xf7ffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[ 0.000000] e820: [mem 0xcfe00000-0xf7ffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff8801aee00000 s86784 r8192 d23808 u524288
[ 0.000000] pcpu-alloc: s86784 r8192 d23808 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1406575
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=9da38127-36ed-47e5-ba97-e9656af3801b rw quiet splash rw
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
[ 0.000000] AGP: Checking aperture...
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 5541880K/5715700K available (5334K kernel code, 887K rwdata, 1688K rodata, 1128K init, 1164K bss, 173820K reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=4.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.000000] NR_IRQS:8448 nr_irqs:712 16
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 23068672 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 2594.142 MHz processor
[ 0.000034] Calibrating delay loop (skipped), value calculated using timer frequency.. 5190.46 BogoMIPS (lpj=8647140)
[ 0.000036] pid_max: default: 32768 minimum: 301
[ 0.000042] ACPI: Core revision 20140424
[ 0.013454] ACPI: All ACPI Tables successfully acquired
[ 0.015248] Security Framework initialized
[ 0.015253] Yama: becoming mindful.
[ 0.015698] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.017594] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.018433] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.018442] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.018639] Initializing cgroup subsys memory
[ 0.018655] Initializing cgroup subsys devices
[ 0.018661] Initializing cgroup subsys freezer
[ 0.018663] Initializing cgroup subsys net_cls
[ 0.018666] Initializing cgroup subsys blkio
[ 0.018687] CPU: Physical Processor ID: 0
[ 0.018688] CPU: Processor Core ID: 0
[ 0.018693] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.019034] mce: CPU supports 7 MCE banks
[ 0.019044] CPU0: Thermal monitoring enabled (TM1)
[ 0.019053] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
tlb_flushall_shift: 2
[ 0.019156] Freeing SMP alternatives memory: 20K (ffffffff819f9000 - ffffffff819fe000)
[ 0.020028] ftrace: allocating 20434 entries in 80 pages
[ 0.029301] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.062327] smpboot: CPU0: Intel(R) Core(TM) i5-3230M CPU @ 2.60GHz (fam: 06, model: 3a, stepping: 09)
[ 0.062334] TSC deadline timer enabled
[ 0.062356] Performance Events: PEBS fmt1+, 16-deep LBR, IvyBridge events, full-width counters, Intel PMU driver.
[ 0.062374] ... version: 3
[ 0.062375] ... bit width: 48
[ 0.062376] ... generic registers: 4
[ 0.062377] ... value mask: 0000ffffffffffff
[ 0.062377] ... max period: 0000ffffffffffff
[ 0.062378] ... fixed-purpose events: 3
[ 0.062379] ... event mask: 000000070000000f
[ 0.089127] x86: Booting SMP configuration:
[ 0.089129] .... node #0, CPUs: #1
[ 0.102615] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.109323] #2 #3
[ 0.143069] x86: Booted up 1 node, 4 CPUs
[ 0.143072] smpboot: Total of 4 processors activated (20761.85 BogoMIPS)
[ 0.146151] devtmpfs: initialized
[ 0.148360] PM: Registering ACPI NVS region [mem 0xad7a9000-0xadda9fff] (6295552 bytes)
[ 0.148429] PM: Registering ACPI NVS region [mem 0xae627000-0xae8a6fff] (2621440 bytes)
[ 0.148457] PM: Registering ACPI NVS region [mem 0xae8ad000-0xae8effff] (274432 bytes)
[ 0.149179] pinctrl core: initialized pinctrl subsystem
[ 0.149217] RTC time: 23:34:40, date: 09/13/14
[ 0.149261] NET: Registered protocol family 16
[ 0.149360] cpuidle: using governor ladder
[ 0.149362] cpuidle: using governor menu
[ 0.149386] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.149388] ACPI: bus type PCI registered
[ 0.149389] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.149452] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.149454] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[ 0.149534] PCI: Using configuration type 1 for base access
[ 0.163412] ACPI: Added _OSI(Module Device)
[ 0.163414] ACPI: Added _OSI(Processor Device)
[ 0.163415] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.163416] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.165254] ACPI : EC: EC description table is found, configuring boot EC
[ 0.167131] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.283333] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.313759] ACPI: Dynamic OEM Table Load:
[ 0.313766] ACPI: SSDT 0xFFFF8801A66AB000 000853 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
[ 0.323515] ACPI: Dynamic OEM Table Load:
[ 0.323519] ACPI: SSDT 0xFFFF8801A6633C00 000303 (v01 PmRef ApIst 00003000 INTL 20051117)
[ 0.336756] ACPI: Dynamic OEM Table Load:
[ 0.336759] ACPI: SSDT 0xFFFF8801A665BE00 000119 (v01 PmRef ApCst 00003000 INTL 20051117)
[ 0.347197] ACPI: Interpreter enabled
[ 0.347203] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140424/hwxface-580)
[ 0.347207] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580)
[ 0.347221] ACPI: (supports S0 S3 S4 S5)
[ 0.347222] ACPI: Using IOAPIC for interrupt routing
[ 0.347245] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.468144] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[ 0.468149] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.556840] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug PME]
[ 0.556961] acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability]
[ 0.557508] PCI host bridge to bus 0000:00
[ 0.557511] pci_bus 0000:00: root bus resource [bus 00-3e]
[ 0.557512] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.557514] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.557515] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.557517] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
[ 0.557518] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
[ 0.557519] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
[ 0.557521] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
[ 0.557522] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff]
[ 0.557523] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff]
[ 0.557525] pci_bus 0000:00: root bus resource [mem 0xcfe00000-0xfeafffff]
[ 0.557532] pci 0000:00:00.0: [8086:0154] type 00 class 0x060000
[ 0.557613] pci 0000:00:01.0: [8086:0151] type 01 class 0x060400
[ 0.557643] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.557680] pci 0000:00:01.0: System wakeup disabled by ACPI
[ 0.557718] pci 0000:00:02.0: [8086:0166] type 00 class 0x030000
[ 0.557728] pci 0000:00:02.0: reg 0x10: [mem 0xf7400000-0xf77fffff 64bit]
[ 0.557734] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.557739] pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f]
[ 0.557836] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
[ 0.557859] pci 0000:00:14.0: reg 0x10: [mem 0xf7a00000-0xf7a0ffff 64bit]
[ 0.557931] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.557971] pci 0000:00:14.0: System wakeup disabled by ACPI
[ 0.558011] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
[ 0.558034] pci 0000:00:16.0: reg 0x10: [mem 0xf7a1a000-0xf7a1a00f 64bit]
[ 0.558108] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.558190] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
[ 0.558212] pci 0000:00:1a.0: reg 0x10: [mem 0xf7a18000-0xf7a183ff]
[ 0.558303] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.558345] pci 0000:00:1a.0: System wakeup disabled by ACPI
[ 0.558382] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
[ 0.558398] pci 0000:00:1b.0: reg 0x10: [mem 0xf7a10000-0xf7a13fff 64bit]
[ 0.558473] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.558516] pci 0000:00:1b.0: System wakeup disabled by ACPI
[ 0.558550] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400
[ 0.558633] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.558708] pci 0000:00:1c.1: [8086:1e12] type 01 class 0x060400
[ 0.558790] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.558866] pci 0000:00:1c.3: [8086:1e16] type 01 class 0x060400
[ 0.558948] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.558992] pci 0000:00:1c.3: System wakeup disabled by ACPI
[ 0.559033] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
[ 0.559054] pci 0000:00:1d.0: reg 0x10: [mem 0xf7a17000-0xf7a173ff]
[ 0.559145] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.559186] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.559222] pci 0000:00:1f.0: [8086:1e59] type 00 class 0x060100
[ 0.559393] pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601
[ 0.559411] pci 0000:00:1f.2: reg 0x10: [io 0xf0b0-0xf0b7]
[ 0.559418] pci 0000:00:1f.2: reg 0x14: [io 0xf0a0-0xf0a3]
[ 0.559427] pci 0000:00:1f.2: reg 0x18: [io 0xf090-0xf097]
[ 0.559434] pci 0000:00:1f.2: reg 0x1c: [io 0xf080-0xf083]
[ 0.559441] pci 0000:00:1f.2: reg 0x20: [io 0xf060-0xf07f]
[ 0.559449] pci 0000:00:1f.2: reg 0x24: [mem 0xf7a16000-0xf7a167ff]
[ 0.559495] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.559563] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
[ 0.559579] pci 0000:00:1f.3: reg 0x10: [mem 0xf7a15000-0xf7a150ff 64bit]
[ 0.559600] pci 0000:00:1f.3: reg 0x20: [io 0xf040-0xf05f]
[ 0.559717] pci 0000:01:00.0: [10de:0fdf] type 00 class 0x030200
[ 0.559731] pci 0000:01:00.0: reg 0x10: [mem 0xf6000000-0xf6ffffff]
[ 0.559743] pci 0000:01:00.0: reg 0x14: [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.559755] pci 0000:01:00.0: reg 0x1c: [mem 0xf0000000-0xf1ffffff 64bit pref]
[ 0.559763] pci 0000:01:00.0: reg 0x24: [io 0xe000-0xe07f]
[ 0.559772] pci 0000:01:00.0: reg 0x30: [mem 0xf7000000-0xf707ffff pref]
[ 0.563477] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.563482] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
[ 0.563487] pci 0000:00:01.0: bridge window [mem 0xf6000000-0xf70fffff]
[ 0.563493] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
[ 0.563574] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.563712] pci 0000:03:00.0: [8086:0887] type 00 class 0x028000
[ 0.563765] pci 0000:03:00.0: reg 0x10: [mem 0xf7900000-0xf7901fff 64bit]
[ 0.564012] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
[ 0.564057] pci 0000:03:00.0: System wakeup disabled by ACPI
[ 0.570225] pci 0000:00:1c.1: PCI bridge to [bus 03]
[ 0.570232] pci 0000:00:1c.1: bridge window [mem 0xf7900000-0xf79fffff]
[ 0.570322] pci 0000:04:00.0: [1969:1091] type 00 class 0x020000
[ 0.570354] pci 0000:04:00.0: reg 0x10: [mem 0xf7800000-0xf783ffff 64bit]
[ 0.570368] pci 0000:04:00.0: reg 0x18: [io 0xd000-0xd07f]
[ 0.570508] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.570545] pci 0000:04:00.0: System wakeup disabled by ACPI
[ 0.576839] pci 0000:00:1c.3: PCI bridge to [bus 04]
[ 0.576847] pci 0000:00:1c.3: bridge window [io 0xd000-0xdfff]
[ 0.576854] pci 0000:00:1c.3: bridge window [mem 0xf7800000-0xf78fffff]
[ 0.576926] acpi PNP0A08:00: Disabling ASPM (FADT indicates it is unsupported)
[ 0.630685] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12)
[ 0.630728] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 12)
[ 0.630769] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *10 12)
[ 0.630809] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 12)
[ 0.630851] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 12) *0, disabled.
[ 0.630892] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 12) *0, disabled.
[ 0.630936] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 7 10 12)
[ 0.630976] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 *4 5 6 7 10 12)
[ 0.631110] ACPI: Enabled 4 GPEs in block 00 to 3F
[ 0.631171] ACPI : EC: GPE = 0x19, I/O: command/status = 0x66, data = 0x62
[ 0.631262] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.631264] vgaarb: loaded
[ 0.631265] vgaarb: bridge control possible 0000:00:02.0
[ 0.631295] PCI: Using ACPI for IRQ routing
[ 0.632841] PCI: pci_cache_line_size set to 64 bytes
[ 0.632894] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
[ 0.632895] e820: reserve RAM buffer [mem 0x40004000-0x43ffffff]
[ 0.632896] e820: reserve RAM buffer [mem 0xad7a9000-0xafffffff]
[ 0.632901] e820: reserve RAM buffer [mem 0xaddc3000-0xafffffff]
[ 0.632906] e820: reserve RAM buffer [mem 0xaddcb000-0xafffffff]
[ 0.632911] e820: reserve RAM buffer [mem 0xadf2c000-0xafffffff]
[ 0.632915] e820: reserve RAM buffer [mem 0xadf7a000-0xafffffff]
[ 0.632919] e820: reserve RAM buffer [mem 0xadfa3000-0xafffffff]
[ 0.632924] e820: reserve RAM buffer [mem 0xadfbc000-0xafffffff]
[ 0.632928] e820: reserve RAM buffer [mem 0xadfca000-0xafffffff]
[ 0.632932] e820: reserve RAM buffer [mem 0xadfda000-0xafffffff]
[ 0.632935] e820: reserve RAM buffer [mem 0xadfe6000-0xafffffff]
[ 0.632939] e820: reserve RAM buffer [mem 0xae017000-0xafffffff]
[ 0.632942] e820: reserve RAM buffer [mem 0xae028000-0xafffffff]
[ 0.632946] e820: reserve RAM buffer [mem 0xae062000-0xafffffff]
[ 0.632949] e820: reserve RAM buffer [mem 0xae064000-0xafffffff]
[ 0.632951] e820: reserve RAM buffer [mem 0xae067000-0xafffffff]
[ 0.632954] e820: reserve RAM buffer [mem 0xae083000-0xafffffff]
[ 0.632956] e820: reserve RAM buffer [mem 0xae8ad000-0xafffffff]
[ 0.632958] e820: reserve RAM buffer [mem 0xaecff000-0xafffffff]
[ 0.632959] e820: reserve RAM buffer [mem 0xaf000000-0xafffffff]
[ 0.632961] e820: reserve RAM buffer [mem 0x1af200000-0x1afffffff]
[ 0.633057] NetLabel: Initializing
[ 0.633058] NetLabel: domain hash size = 128
[ 0.633059] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.633069] NetLabel: unlabeled traffic allowed by default
[ 0.633093] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.633097] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.635125] Switched to clocksource hpet
[ 0.639054] pnp: PnP ACPI init
[ 0.639068] ACPI: bus type PNP registered
[ 0.639157] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
[ 0.639160] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.691999] system 00:01: [io 0x0680-0x069f] has been reserved
[ 0.692001] system 00:01: [io 0x1000-0x100f] has been reserved
[ 0.692003] system 00:01: [io 0xffff] has been reserved
[ 0.692004] system 00:01: [io 0xffff] has been reserved
[ 0.692006] system 00:01: [io 0x0400-0x0453] could not be reserved
[ 0.692007] system 00:01: [io 0x0458-0x047f] has been reserved
[ 0.692009] system 00:01: [io 0x0500-0x057f] has been reserved
[ 0.692010] system 00:01: [io 0x164e-0x164f] has been reserved
[ 0.692013] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.692041] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.692088] system 00:03: [io 0x0454-0x0457] has been reserved
[ 0.692090] system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 0.692134] system 00:04: [io 0x04d0-0x04d1] has been reserved
[ 0.692136] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.692189] pnp 00:05: Plug and Play ACPI device, IDs ETD0108 SYN0a00 SYN0002 PNP0f03 PNP0f13 PNP0f12 (active)
[ 0.692225] pnp 00:06: Plug and Play ACPI device, IDs ATK3001 PNP030b (active)
[ 0.692379] system 00:07: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.692381] system 00:07: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.692383] system 00:07: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.692384] system 00:07: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.692386] system 00:07: [mem 0xf8000000-0xfbffffff] has been reserved
[ 0.692388] system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.692389] system 00:07: [mem 0xfed90000-0xfed93fff] has been reserved
[ 0.692391] system 00:07: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.692393] system 00:07: [mem 0xff000000-0xffffffff] has been reserved
[ 0.692395] system 00:07: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.692396] system 00:07: [mem 0xcfe00000-0xcfe00fff] has been reserved
[ 0.692398] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.692464] system 00:08: [mem 0xcfe00000-0xcfe00fff] has been reserved
[ 0.692466] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.692587] system 00:09: [mem 0x20000000-0x201fffff] has been reserved
[ 0.692589] system 00:09: [mem 0x40004000-0x40004fff] has been reserved
[ 0.692591] system 00:09: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.692617] pnp: PnP ACPI: found 10 devices
[ 0.692618] ACPI: bus type PNP unregistered
[ 0.698950] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.698953] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
[ 0.698956] pci 0000:00:01.0: bridge window [mem 0xf6000000-0xf70fffff]
[ 0.698958] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
[ 0.698961] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.698973] pci 0000:00:1c.1: PCI bridge to [bus 03]
[ 0.698978] pci 0000:00:1c.1: bridge window [mem 0xf7900000-0xf79fffff]
[ 0.698986] pci 0000:00:1c.3: PCI bridge to [bus 04]
[ 0.698989] pci 0000:00:1c.3: bridge window [io 0xd000-0xdfff]
[ 0.698995] pci 0000:00:1c.3: bridge window [mem 0xf7800000-0xf78fffff]
[ 0.699004] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.699005] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.699007] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.699008] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff]
[ 0.699009] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff]
[ 0.699011] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff]
[ 0.699012] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff]
[ 0.699014] pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff]
[ 0.699015] pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff]
[ 0.699016] pci_bus 0000:00: resource 13 [mem 0xcfe00000-0xfeafffff]
[ 0.699018] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
[ 0.699019] pci_bus 0000:01: resource 1 [mem 0xf6000000-0xf70fffff]
[ 0.699021] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xf1ffffff 64bit pref]
[ 0.699023] pci_bus 0000:03: resource 1 [mem 0xf7900000-0xf79fffff]
[ 0.699024] pci_bus 0000:04: resource 0 [io 0xd000-0xdfff]
[ 0.699026] pci_bus 0000:04: resource 1 [mem 0xf7800000-0xf78fffff]
[ 0.699048] NET: Registered protocol family 2
[ 0.699217] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.699348] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.699457] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.699472] TCP: reno registered
[ 0.699483] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.699508] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.699564] NET: Registered protocol family 1
[ 0.699579] pci 0000:00:02.0: Boot video device
[ 0.735318] pci 0000:04:00.0: set MSI_INTX_DISABLE_BUG flag
[ 0.735322] PCI: CLS 64 bytes, default 64
[ 0.735362] Unpacking initramfs...
[ 0.816940] Freeing initrd memory: 5356K (ffff88003757a000 - ffff880037ab5000)
[ 0.816948] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.816950] software IO TLB [mem 0xa97a9000-0xad7a9000] (64MB) mapped at [ffff8800a97a9000-ffff8800ad7a8fff]
[ 0.817180] RAPL PMU detected, hw unit 2^-16 Joules, API unit is 2^-32 Joules, 3 fixed counters 163840 ms ovfl timer
[ 0.817219] Scanning for low memory corruption every 60 seconds
[ 0.817445] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 0.817768] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.818908] zbud: loaded
[ 0.819058] VFS: Disk quotas dquot_6.5.2
[ 0.819086] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.819182] msgmni has been set to 10834
[ 0.819224] Key type big_key registered
[ 0.819368] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.819416] io scheduler noop registered
[ 0.819420] io scheduler deadline registered
[ 0.819459] io scheduler cfq registered (default)
[ 0.819605] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[ 0.819964] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.819978] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.820007] intel_idle: MWAIT substates: 0x21120
[ 0.820008] intel_idle: v0.4 model 0x3A
[ 0.820009] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.820167] GHES: HEST is not enabled!
[ 0.820230] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.820623] Linux agpgart interface v0.103
[ 0.820666] rtc_cmos 00:02: RTC can wake from S4
[ 0.820787] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 0.820817] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 0.820826] Intel P-state driver initializing.
[ 0.820835] Intel pstate controlling: cpu 0
[ 0.820854] Intel pstate controlling: cpu 1
[ 0.820871] Intel pstate controlling: cpu 2
[ 0.820903] Intel pstate controlling: cpu 3
[ 0.820972] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.821169] TCP: cubic registered
[ 0.821332] NET: Registered protocol family 10
[ 0.821644] NET: Registered protocol family 17
[ 0.822136] registered taskstats version 1
[ 0.822912] Magic number: 14:465:605
[ 0.823042] rtc_cmos 00:02: setting system clock to 2014-09-13 23:34:40 UTC (1410651280)
[ 0.823314] PM: Hibernation image not present or could not be loaded.
[ 0.824652] Freeing unused kernel memory: 1128K (ffffffff818df000 - ffffffff819f9000)
[ 0.824655] Write protecting the kernel read-only data: 8192k
[ 0.828153] Freeing unused kernel memory: 800K (ffff880001538000 - ffff880001600000)
[ 0.829631] Freeing unused kernel memory: 360K (ffff8800017a6000 - ffff880001800000)
[ 0.831604] random: systemd urandom read with 1 bits of entropy available
[ 0.832821] systemd[1]: Configuration file /usr/lib/systemd/system/ctrl-alt-del.target is marked executable. Please remove executable permission bits. Proceeding anyway.
[ 0.832824] systemd[1]: Configuration file /usr/lib/systemd/system/ctrl-alt-del.target is marked world-writable. Please remove world writability permission bits. Proceeding anyway.
[ 0.835895] systemd[1]: Cannot add dependency job for unit local-fs.target, ignoring: Unit local-fs.target failed to load: No such file or directory.
[ 0.835900] systemd[1]: Cannot add dependency job for unit swap.target, ignoring: Unit swap.target failed to load: No such file or directory.
[ 0.835907] systemd[1]: Cannot add dependency job for unit systemd-journald-dev-log.socket, ignoring: Unit systemd-journald-dev-log.socket failed to load: No such file or directory.
[ 0.835915] systemd[1]: Cannot add dependency job for unit timers.target, ignoring: Unit timers.target failed to load: No such file or directory.
[ 0.835918] systemd[1]: Cannot add dependency job for unit paths.target, ignoring: Unit paths.target failed to load: No such file or directory.
[ 0.835921] systemd[1]: Cannot add dependency job for unit slices.target, ignoring: Unit slices.target failed to load: No such file or directory.
[ 0.846204] systemd-udevd[61]: starting version 216
[ 0.851356] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[ 0.857066] i8042: PNP: PS/2 Controller [PNP030b:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[ 0.858876] i8042: Detected active multiplexing controller, rev 1.1
[ 0.870874] ACPI: bus type USB registered
[ 0.870902] usbcore: registered new interface driver usbfs
[ 0.870913] usbcore: registered new interface driver hub
[ 0.870957] usbcore: registered new device driver usb
[ 0.871727] [drm] Initialized drm 1.1.0 20060810
[ 0.871912] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.871977] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 0.872004] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 0.872031] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 0.872054] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 0.872570] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.872800] ehci-pci: EHCI PCI platform driver
[ 0.872972] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 0.872979] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 0.872995] ehci-pci 0000:00:1a.0: debug port 2
[ 0.873414] SCSI subsystem initialized
[ 0.874735] libata version 3.00 loaded.
[ 0.876901] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[ 0.876921] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7a18000
[ 0.878730] ACPI: Lid Switch [LID]
[ 0.878783] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
[ 0.878787] ACPI: Sleep Button [SLPB]
[ 0.878823] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 0.878824] ACPI: Power Button [PWRF]
[ 0.885423] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 0.885744] hub 1-0:1.0: USB hub found
[ 0.885754] hub 1-0:1.0: 2 ports detected
[ 0.886157] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 0.886163] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 0.886179] ehci-pci 0000:00:1d.0: debug port 2
[ 0.890092] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 0.890108] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7a17000
[ 0.898678] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 0.898863] hub 2-0:1.0: USB hub found
[ 0.898873] hub 2-0:1.0: 2 ports detected
[ 0.899123] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.899131] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[ 0.899234] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 0.899258] xhci_hcd 0000:00:14.0: irq 41 for MSI/MSI-X
[ 0.899457] hub 3-0:1.0: USB hub found
[ 0.899469] hub 3-0:1.0: 4 ports detected
[ 0.899602] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.899604] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
[ 0.899850] hub 4-0:1.0: USB hub found
[ 0.899861] hub 4-0:1.0: 4 ports detected
[ 0.899997] ahci 0000:00:1f.2: version 3.0
[ 0.900123] ahci 0000:00:1f.2: irq 42 for MSI/MSI-X
[ 0.912049] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x5 impl SATA mode
[ 0.912054] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst
[ 0.919284] scsi0 : ahci
[ 0.919473] scsi1 : ahci
[ 0.919569] scsi2 : ahci
[ 0.919652] scsi3 : ahci
[ 0.919737] scsi4 : ahci
[ 0.919817] scsi5 : ahci
[ 0.919849] ata1: SATA max UDMA/133 abar m2048@0xf7a16000 port 0xf7a16100 irq 42
[ 0.919850] ata2: DUMMY
[ 0.919853] ata3: SATA max UDMA/133 abar m2048@0xf7a16000 port 0xf7a16200 irq 42
[ 0.919853] ata4: DUMMY
[ 0.919854] ata5: DUMMY
[ 0.919855] ata6: DUMMY
[ 0.920241] [drm] Memory usable by graphics device = 2048M
[ 0.920243] [drm] Replacing VGA console driver
[ 0.921140] Console: switching to colour dummy device 80x25
[ 0.927099] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[ 0.978778] i915 0000:00:02.0: irq 43 for MSI/MSI-X
[ 0.978791] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 0.978793] [drm] Driver supports precise vblank timestamp query.
[ 0.992401] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 1.031464] fbcon: inteldrmfb (fb0) is primary device
[ 1.192296] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 1.238940] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.238968] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.241132] ata3.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
[ 1.241135] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 1.242336] ata3.00: ATAPI: MATSHITABD-CMB UJ160, 1.00, max UDMA/133
[ 1.244048] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 1.244388] ata1.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
[ 1.244391] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 1.244636] ata3.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
[ 1.244639] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 1.245827] ata3.00: configured for UDMA/133
[ 1.249666] ata1.00: ATA-8: WDC WD7500BPVT-80HXZT3, 01.01A01, max UDMA/133
[ 1.249668] ata1.00: 1465149168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.254977] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 1.255204] ata1.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
[ 1.255207] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 1.260474] ata1.00: configured for UDMA/133
[ 1.260796] scsi 0:0:0:0: Direct-Access ATA WDC WD7500BPVT-8 1A01 PQ: 0 ANSI: 5
[ 1.262991] scsi 2:0:0:0: CD-ROM MATSHITA BD-CMB UJ160 1.00 PQ: 0 ANSI: 5
[ 1.279845] sd 0:0:0:0: [sda] 1465149168 512-byte logical blocks: (750 GB/698 GiB)
[ 1.279848] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 1.279989] sd 0:0:0:0: [sda] Write Protect is off
[ 1.279992] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.280037] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.288053] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.288055] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.288272] sr 2:0:0:0: Attached scsi CD-ROM sr0
[ 1.305366] [drm:cpt_set_fifo_underrun_reporting] *ERROR* uncleared pch fifo underrun on pch transcoder A
[ 1.305367] [drm:cpt_serr_int_handler] *ERROR* PCH transcoder A FIFO underrun
[ 1.316307] hub 1-1:1.0: USB hub found
[ 1.316391] hub 1-1:1.0: 6 ports detected
[ 1.397316] sda: sda1 sda2 < sda5 sda6 sda7 sda8 sda9 sda10 >
[ 1.399073] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.422404] usb 2-1: new high-speed USB device number 2 using ehci-pci
[ 1.546748] hub 2-1:1.0: USB hub found
[ 1.546905] hub 2-1:1.0: 6 ports detected
[ 1.683098] Console: switching to colour frame buffer device 240x67
[ 1.692813] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 1.692815] i915 0000:00:02.0: registered panic notifier
[ 1.709304] usb 3-3: new low-speed USB device number 2 using xhci_hcd
[ 1.709735] ACPI: Video Device [PEGP] (multi-head: yes rom: yes post: no)
[ 1.709833] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:02/LNXVIDEO:00/input/input8
[ 1.727351] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 1.752763] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input9
[ 1.752815] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 1.819288] tsc: Refined TSC clocksource calibration: 2594.112 MHz
[ 1.887971] usb 3-3: ep 0x83 - rounding interval to 64 microframes, ep desc says 80 microframes
[ 1.890031] hidraw: raw HID events driver (C) Jiri Kosina
[ 1.900283] usbcore: registered new interface driver usbhid
[ 1.900287] usbhid: USB HID core driver
[ 1.901514] input: Microsoft Comfort Mouse 3000 as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3:1.0/0003:045E:077B.0001/input/input10
[ 1.901597] hid-generic 0003:045E:077B.0001: input,hidraw0: USB HID v1.11 Mouse [Microsoft Comfort Mouse 3000] on usb-0000:00:14.0-3/input0
[ 1.966216] usb 1-1.1: new full-speed USB device number 3 using ehci-pci
[ 2.132934] usb 1-1.3: new high-speed USB device number 4 using ehci-pci
[ 2.416335] [drm] Enabling RC6 states: RC6 on, RC6p on, RC6pp off
[ 2.820032] Switched to clocksource tsc
[ 2.888651] random: nonblocking pool is initialized
[ 3.089789] EXT4-fs (sda8): mounted filesystem with ordered data mode. Opts: (null)
[ 3.358639] systemd-journald[53]: Received SIGTERM from PID 1 (systemd).
[ 5.897107] systemd-readahead[155]: Bumped block_nr parameter of 8:0 to 20480. This is a temporary hack and should be removed one day.
[ 6.512882] EXT4-fs (sda8): re-mounted. Opts: data=ordered
[ 7.301637] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 7.308423] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 7.314841] systemd-udevd[191]: starting version 216
[ 7.318026] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 9.643450] ACPI: AC Adapter [AC0] (off-line)
[ 9.707164] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042f conflicts with OpRegion 0x0000000000000400-0x000000000000044f (\GPIS) (20140424/utaddress-258)
[ 9.707175] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042f conflicts with OpRegion 0x0000000000000400-0x000000000000047f (\PMIO) (20140424/utaddress-258)
[ 9.707183] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 9.707188] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054f conflicts with OpRegion 0x0000000000000500-0x000000000000057f (\GPIO) (20140424/utaddress-258)
[ 9.707194] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054f conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GP01) (20140424/utaddress-258)
[ 9.707200] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 9.707203] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053f conflicts with OpRegion 0x0000000000000500-0x000000000000057f (\GPIO) (20140424/utaddress-258)
[ 9.707208] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053f conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GP01) (20140424/utaddress-258)
[ 9.707214] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 9.707217] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052f conflicts with OpRegion 0x0000000000000500-0x000000000000057f (\GPIO) (20140424/utaddress-258)
[ 9.707222] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052f conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GP01) (20140424/utaddress-258)
[ 9.707228] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 9.707231] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 9.732620] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 9.754610] mei_me 0000:00:16.0: irq 44 for MSI/MSI-X
[ 9.823510] ACPI Warning: SystemIO range 0x000000000000f040-0x000000000000f05f conflicts with OpRegion 0x000000000000f040-0x000000000000f04f (\SMB0) (20140424/utaddress-258)
[ 9.823518] ACPI Warning: SystemIO range 0x000000000000f040-0x000000000000f05f conflicts with OpRegion 0x000000000000f040-0x000000000000f04f (\_SB_.PCI0.SBUS.SMBI) (20140424/utaddress-258)
[ 9.823522] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 9.885093] ACPI: Battery Slot [BAT0] (battery present)
[ 9.885341] wmi: Mapper loaded
[ 10.025457] input: PC Speaker as /devices/platform/pcspkr/input/input11
[ 10.107482] thermal LNXTHERM:00: registered as thermal_zone0
[ 10.107485] ACPI: Thermal Zone [THRM] (54 C)
[ 10.123269] microcode: CPU0 sig=0x306a9, pf=0x10, revision=0x15
[ 10.219286] cfg80211: Calling CRDA to update world regulatory domain
[ 10.271262] Intel(R) Wireless WiFi driver for Linux, in-tree:
[ 10.271264] Copyright(c) 2003- 2014 Intel Corporation
[ 10.271366] iwlwifi 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 10.271428] iwlwifi 0000:03:00.0: irq 45 for MSI/MSI-X
[ 10.310963] iTCO_vendor_support: vendor-support=0
[ 10.422203] microcode: CPU1 sig=0x306a9, pf=0x10, revision=0x15
[ 10.422220] microcode: CPU2 sig=0x306a9, pf=0x10, revision=0x15
[ 10.422235] microcode: CPU3 sig=0x306a9, pf=0x10, revision=0x15
[ 10.422315] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
[ 10.525335] alx 0000:04:00.0 eth0: Qualcomm Atheros AR816x/AR817x Ethernet [60:a4:4c:70:de:11]
[ 10.559149] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 10.559206] iTCO_wdt: Found a Panther Point TCO device (Version=2, TCOBASE=0x0460)
[ 10.559374] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 10.574607] psmouse serio4: alps: Unknown ALPS touchpad: E7=10 00 64, EC=10 00 64
[ 10.677032] iwlwifi 0000:03:00.0: loaded firmware version 18.168.6.1 op_mode iwldvm
[ 10.694508] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUG disabled
[ 10.694514] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUGFS disabled
[ 10.694517] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEVICE_TRACING enabled
[ 10.694521] iwlwifi 0000:03:00.0: Detected Intel(R) Centrino(R) Wireless-N 2230 BGN, REV=0xC8
[ 10.694580] iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S
[ 10.703738] asus_wmi: ASUS WMI generic driver loaded
[ 10.704976] asus_wmi: Initialization: 0x1
[ 10.705014] asus_wmi: BIOS WMI version: 7.9
[ 10.705057] asus_wmi: SFUN value: 0x6a0877
[ 10.706030] input: Asus WMI hotkeys as /devices/platform/asus-nb-wmi/input/input16
[ 10.715790] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
[ 10.807860] asus_wmi: Backlight controlled by ACPI video driver
[ 10.883267] snd_hda_intel 0000:00:1b.0: irq 46 for MSI/MSI-X
[ 10.898742] sound hdaudioC0D0: autoconfig: line_outs=2 (0x14/0x16/0x0/0x0/0x0) type:speaker
[ 10.898747] sound hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 10.898750] sound hdaudioC0D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[ 10.898752] sound hdaudioC0D0: mono: mono_out=0x0
[ 10.898754] sound hdaudioC0D0: dig-out=0x1e/0x0
[ 10.898756] sound hdaudioC0D0: inputs:
[ 10.898759] sound hdaudioC0D0: Internal Mic=0x19
[ 10.898762] sound hdaudioC0D0: Mic=0x18
[ 10.911221] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/hdaudioC0D0/input17
[ 10.911566] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input18
[ 10.911637] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input19
[ 10.911707] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input20
[ 11.070896] psmouse serio4: elantech: assuming hardware version 4 (with firmware version 0x361f03)
[ 11.085464] psmouse serio4: elantech: Synaptics capabilities query result 0x10, 0x15, 0x0d.
[ 11.152788] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio4/input/input15
[ 11.532713] systemd-udevd[285]: renamed network interface eth0 to enp4s0
[ 11.632559] systemd-udevd[285]: renamed network interface wlan0 to wlp3s0
[ 11.796657] mousedev: PS/2 mouse device common for all mice
[ 11.814896] AVX version of gcm_enc/dec engaged.
[ 12.249546] media: Linux media interface: v0.10
[ 12.405592] Linux video capture interface: v2.00
[ 12.489425] Bluetooth: Core ver 2.19
[ 12.489454] NET: Registered protocol family 31
[ 12.489458] Bluetooth: HCI device and connection manager initialized
[ 12.489470] Bluetooth: HCI socket layer initialized
[ 12.489475] Bluetooth: L2CAP socket layer initialized
[ 12.489499] Bluetooth: SCO socket layer initialized
[ 12.618057] usbcore: registered new interface driver btusb
[ 12.741864] Adding 6291452k swap on /dev/sda5. Priority:-1 extents:1 across:6291452k FS
[ 12.946876] uvcvideo: Found UVC 1.00 device ASUS USB2.0 Webcam (1bcf:2883)
[ 12.964918] input: ASUS USB2.0 Webcam as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.0/input/input21
[ 12.965046] usbcore: registered new interface driver uvcvideo
[ 12.965049] USB Video Class driver (1.1.1)
[ 13.388855] intel_rapl: RAPL domain dram detection failed
[ 15.010386] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
[ 15.017669] systemd-journald[159]: Received request to flush runtime journal from PID 1
[ 27.377350] bbswitch: version 0.8
[ 27.377363] bbswitch: Found integrated VGA device 0000:00:02.0: \_SB_.PCI0.GFX0
[ 27.377367] bbswitch: Found discrete VGA device 0000:01:00.0: \_SB_.PCI0.PEG0.PEGP
[ 27.377374] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140424/nsarguments-95)
[ 27.377449] bbswitch: detected an Optimus _DSM function
[ 27.377495] bbswitch: Succesfully loaded. Discrete card 0000:01:00.0 is on
[ 27.378547] bbswitch: disabling discrete graphics
[ 27.378554] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140424/nsarguments-95)
[ 27.805771] alx 0000:04:00.0: irq 47 for MSI/MSI-X
[ 27.806124] IPv6: ADDRCONF(NETDEV_UP): enp4s0: link is not ready
[ 27.840453] iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S
[ 27.847948] iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0
[ 28.089495] iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S
[ 28.097001] iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0
[ 28.163505] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[ 28.525115] fuse init (API version 7.23)
[ 28.890210] wlp3s0: authenticate with 90:0d:cb:19:04:e0
[ 28.895402] wlp3s0: send auth to 90:0d:cb:19:04:e0 (try 1/3)
[ 28.897519] wlp3s0: authenticated
[ 28.900414] wlp3s0: associate with 90:0d:cb:19:04:e0 (try 1/3)
[ 28.916513] wlp3s0: RX AssocResp from 90:0d:cb:19:04:e0 (capab=0xc11 status=0 aid=4)
[ 28.936417] wlp3s0: associated
[ 28.936448] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
[ 28.936477] cfg80211: Calling CRDA to update world regulatory domain
[ 32.940hcra wrote:You might see this Wiki page for long boot times and NetworkManager
https://wiki.archlinux.org/index.php/Sy … _over_time
Wow, that solved this problem. I had 5 GB of systemd logs. I deleted them (after making a backup on another disk), I limited the journal size to only 50MB, and now NetworkManager only lasts 4 seconds to start, and GDM appears 10 seconds earlier. Thanks a lot -
[SOLVED] After pacman update, system no longer boots
Updated pacman packages, and half-way through the upgrade proces fails (it mentions not being able to find package-control). Upon investigating, I notice no programs are working. I ls /usr/bin and it is empty! In a panic, I restart the machine, and it no longer boots up.
My boot is on sda3 and /root is sda5.
When bash starts up, it loads the kernel fine, and then after a second it panics and exclaims: "No init found. Try passing init=bootarg".
I load up my trusty Arch livecd and fsck the partitions. Fsck claims both partitions are clean. I am able to mount them and examine the file structure: all files look like they are there. I then try to chroot the mounted partition (sda5, my /root), and get the error that "/bin/bash" is not found, even though it is there in the correct directory. Not sure what to do now.
My grub entry, which has always worked fine prior to this:
legacy_kernel '/linux344-ck' 'acpi_osi=Linux' 'root=/dev/sda5' 'rootfstype=ext4' 'init=/sbin/init' 'pcie_aspm=force' 'acpi_backlight=vendor' 'i915.i915_enable_rc6=1' 'i915.i915_enable_fbc=1' 'i915.lvds_downclock=1' 'ipv6.disable=1' 'i915.semaphores=1' 'modprobe.blacklist=bluetooth,uvcvideo' 'ro'
legacy_initrd '/initramfs-linux-fallback.img' '/initramfs-linux-fallback.img'
UPDATE: solved issue. I didn't read the news. Upgrading via pacman broke my system because of this. Now I know! System is running smooth again.
Last edited by corruptz0r (2012-07-15 20:26:53)Huh. I guess the problem was a couple of stale and crusty {,f}getty .service files, and an obsolete slim.service file I created a while back.
Removing them fixed my problem, although tty1 still shows boot messages (not a problem, and may not even be "new" behaviour)
Cheers Tomegun. -
Problem solving expertise appreciated. What does a MacPro do in its initial booting phase?
My MacPro 3.1 (2008) with 20 Gb Ram does no longer want to boot. I checked the harddrive (startup disc), it is OK (my MacBook) boots from it. I checked the ram, it appears to be OK. When I push the power button the fan begins to work, red lights appear shortly on the RAM circuit boards and they go out again but then nothing happens. Monitor does not wake up, there is no start up chime, machine appear unresposive to any keyboard commands.
Anyone can tell what may be wrong, what the cause is why the MacPro does no longer want to boot and what could possibly be done about it?
So some Problem solving expertise and advice is higlhly appreciated. I really like to know what exactly does a MacPro do in its initial booting phase? Information that could bring life b to my well respected grand-old lady.Conventional wisdom is that you get nowhere until you get the chime.
For that reason, the approved method is to remove everything that could possible be dragging down power and test the absolute minimum configuration, hoping to get the chime. Once it chimes, you slowly build it back up. adding one part at a time until you find something faulty or it "comes clean".
Disconnect AC power and remove:
graphics card
All other PCIe cards
All Hard drives
All Optical drives
All RAM -- then check for the power light blinking
next step is to restore one pair of DIMMs and try for the chime.
Then more DIMMs
Then graphics card, etc. -
When I install Windows 8 on my MacBook Pro(13-inch,Early2011),the Super DVD Drive doesn't appear in Windows 8 and installing Boot Camp 5 drivers doesn't solve my problem,what can I do?
Go into your system preferences and click the startup disk icon then select your Mac HD.
-
System freezes due to hard disk problems only on Linux (not windows)
Intro/context:
Recently i've bought (about 2 months) a new laptop, a Lenovo G50-70, which came with Windows 8.1. As i had no interest on that OS, i formatted the disk and installed only Arch Linux. During that time i experienced system freezes which i had no idea why they were happening. As time went by, i found disk errors on system logs related to hard drive. I searched those errors and almost everything i found was that my hard drive had problems, so i decided to use my warranty. But first, i installed the original OS back again. And after using it a couple of weeks, i didn't experiencie any problem with my hard drive (on Linux it was really frequent). Now i've installed Arch Linux back, along with original Windows 8.1, having dual boot. There is no disk problem when using Windows, but when on Arch, i have the same errors and problems i used to have. So i assume it may be related to kernel or some confniguration issue.
I also haven't noticed any relation between system freezes and system use. I mean, it can happen either under light or heavy use.
tl dr: system freezes randomly for some minutes when using linux due to hard drive problems. The problem doesn't happen on windows.
What i've done so far:
The first period i was on Arch, i run smart (long and short), fsck, and hdparm tests. And nothing (no errors). Searched for bad blocks, and nothing. When back on windows, i also run tests on hdd and found no problems, except some sector reallocation not-that-nice indicators. These problems occured at the end of the first arch installation period. But still i currently experience no problem on windows.
I've also tried setting libata: noncq, 3.0G, noacpi, noapic kernel parameters, and had no result.
Changed BIOS setting from AHCI to Legacy, and no result. Also updated BIOS and no result.
I found no firmware update for this hard drive.
So i don't know what other thing i can try. I want to emphasize that there is no problem, no freezing, when running Windows, so i don't think it's a hard drive issue.
Info:
Hard drive is a Toshiba 2.5" HDD MQ01ABD100 5400 rpm.
Some logs i've recollected all this time:
journalctl -xfa --system
abr 21 13:51:13 echoes kernel: ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
abr 21 13:51:24 echoes kernel: ata1.00: failed command: CHECK POWER MODE
abr 21 13:51:24 echoes kernel: ata1.00: cmd e5/00:00:00:00:00/00:00:00:00:00/00 tag 7
res 40/00:01:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
abr 21 13:51:24 echoes kernel: ata1.00: status: { DRDY }
abr 21 13:51:24 echoes kernel: ata1: hard resetting link
abr 21 13:51:24 echoes kernel: ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
abr 21 13:51:24 echoes kernel: ata1.00: configured for UDMA/100
abr 21 13:51:24 echoes kernel: ata1: EH complete
abr 21 14:01:40 echoes kernel: ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
abr 21 14:02:01 echoes kernel: ata1.00: failed command: SMART
abr 21 14:02:01 echoes kernel: ata1.00: cmd b0/d1:01:00:4f:c2/00:00:00:00:00/00 tag 23 pio 512 in
res 40/00:ff:80:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
abr 21 14:02:01 echoes kernel: ata1.00: status: { DRDY }
abr 21 14:02:01 echoes kernel: ata1: hard resetting link
abr 21 14:02:01 echoes kernel: ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
abr 21 14:02:01 echoes kernel: ata1.00: configured for UDMA/100
abr 21 14:02:01 echoes kernel: ata1: EH complete
abr 21 14:02:01 echoes kernel: ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
abr 21 14:02:01 echoes kernel: ata1.00: failed command: SMART
abr 21 14:02:01 echoes kernel: ata1.00: cmd b0/d0:01:00:4f:c2/00:00:00:00:00/00 tag 22 pio 512 in
res 40/00:ff:ff:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
abr 21 14:02:01 echoes kernel: ata1.00: status: { DRDY }
abr 21 14:02:01 echoes kernel: ata1: hard resetting link
abr 21 14:02:01 echoes kernel: ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
abr 21 14:02:01 echoes kernel: ata1.00: configured for UDMA/100
abr 21 14:02:01 echoes kernel: ata1: EH complete
abr 21 14:02:01 echoes kernel: ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
abr 21 14:02:01 echoes kernel: ata1.00: failed command: SMART
abr 21 14:02:01 echoes kernel: ata1.00: cmd b0/da:00:00:4f:c2/00:00:00:00:00/00 tag 18
res 40/00:01:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
abr 21 14:02:01 echoes kernel: ata1.00: status: { DRDY }
abr 21 14:02:01 echoes kernel: ata1: hard resetting link
abr 21 14:02:01 echoes kernel: ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
abr 21 14:02:01 echoes kernel: ata1.00: configured for UDMA/100
abr 21 14:02:01 echoes kernel: ata1: EH complete
abr 21 14:01:51 echoes udisksd[627]: Error performing housekeeping for drive /org/freedesktop/UDisks2/drives/TOSHIBA_MQ01ABD100_Y44MT611T: Error updating SMART data: sk_disk_smart_status: Input/output error (udisks-error-quark, 0)
dmesg
[55661.023028] ata1.00: exception Emask 0x0 SAct 0x8000 SErr 0x0 action 0x6 frozen
[55661.023034] ata1.00: failed command: READ FPDMA QUEUED
[55661.023040] ata1.00: cmd 60/08:78:18:08:c0/00:00:4b:00:00/40 tag 15 ncq 4096 in
res 40/00:00:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
[55661.023042] ata1.00: status: { DRDY }
[55661.023046] ata1: hard resetting link
[55666.358537] ata1: link is slow to respond, please be patient (ready=0)
[55671.053813] ata1: COMRESET failed (errno=-16)
[55671.053819] ata1: hard resetting link
[55676.389438] ata1: link is slow to respond, please be patient (ready=0)
[55678.897149] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[55681.320305] ata1.00: configured for UDMA/100
[55681.320319] ata1.00: device reported invalid CHS sector 0
[55681.320349] ata1: EH complete
[55729.969443] [drm:intel_set_cpu_fifo_underrun_reporting [i915]] *ERROR* uncleared fifo underrun on pipe A
[55729.969588] [drm:intel_cpu_fifo_underrun_irq_handler [i915]] *ERROR* CPU pipe A FIFO underrun
dmesg
[102884.889930] systemd[1]: systemd-journald.service: main process exited, code=dumped, status=6/ABRT
[102884.890305] systemd[1]: Unit systemd-journald.service entered failed state.
[102884.890333] systemd[1]: systemd-journald.service failed.
[102885.560745] systemd-coredump[28916]: Detected coredump of the journal daemon itself, diverted to /var/lib/systemd/coredump/core.systemd-journal.0.5bf9a012fed048ce8975998cf3c3c20e.6705.1427990901000000.
[102885.860957] systemd-journald[28919]: File /var/log/journal/b130c96d1371445d9ddeb40c51c77dd6/system.journal corrupted or uncleanly shut down, renaming and replacing.
[102921.797810] systemd-journald[28919]: File /var/log/journal/b130c96d1371445d9ddeb40c51c77dd6/user-1000.journal corrupted or uncleanly shut down, renaming and replacing.
[104179.117363] ata1.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x6 frozen
[104179.117369] ata1.00: failed command: READ FPDMA QUEUED
[104179.117375] ata1.00: cmd 60/08:00:48:88:8b/00:00:4d:00:00/40 tag 0 ncq 4096 in
res 40/00:01:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
[104179.117377] ata1.00: status: { DRDY }
[104179.117381] ata1: hard resetting link
[104184.453382] ata1: link is slow to respond, please be patient (ready=0)
[104189.149114] ata1: COMRESET failed (errno=-16)
[104189.149121] ata1: hard resetting link
[104189.469276] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[104189.952982] ata1.00: configured for UDMA/100
[104189.952989] ata1.00: device reported invalid CHS sector 0
[104189.953004] ata1: EH complete
[104508.223792] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[104508.223798] ata1.00: failed command: SMART
[104508.223803] ata1.00: cmd b0/da:00:00:4f:c2/00:00:00:00:00/00 tag 2
res 40/00:ff:80:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[104508.223806] ata1.00: status: { DRDY }
[104508.223810] ata1: hard resetting link
[104509.984601] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[104510.698126] ata1.00: configured for UDMA/100
[104510.698157] ata1: EH complete
One of the latest and worse
journalctl -xfa --system
abr 22 12:57:11 echoes kernel: ata1.00: failed command: WRITE FPDMA QUEUED
abr 22 12:57:11 echoes kernel: ata1.00: cmd 61/08:00:e0:d6:75/00:00:00:00:00/40 tag 0 ncq 4096 out
res 40/00:01:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
abr 22 12:57:11 echoes kernel: ata1.00: status: { DRDY }
abr 22 12:57:11 echoes kernel: ata1.00: failed command: WRITE FPDMA QUEUED
abr 22 12:57:11 echoes kernel: ata1.00: cmd 61/08:08:08:d8:75/00:00:00:00:00/40 tag 1 ncq 4096 out
res 40/00:01:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
abr 22 12:57:11 echoes kernel: ata1.00: status: { DRDY }
abr 22 12:57:11 echoes kernel: ata1.00: failed command: WRITE FPDMA QUEUED
abr 22 12:57:11 echoes kernel: ata1.00: cmd 61/08:10:30:d9:75/00:00:00:00:00/40 tag 2 ncq 4096 out
res 40/00:ff:80:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
abr 22 12:57:11 echoes kernel: ata1.00: status: { DRDY }
abr 22 12:57:11 echoes kernel: ata1.00: failed command: WRITE FPDMA QUEUED
abr 22 12:57:11 echoes kernel: ata1.00: cmd 61/08:18:58:da:75/00:00:00:00:00/40 tag 3 ncq 4096 out
res 40/00:01:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
abr 22 12:57:11 echoes kernel: ata1.00: status: { DRDY }
abr 22 12:57:11 echoes kernel: ata1.00: failed command: WRITE FPDMA QUEUED
abr 22 12:57:11 echoes kernel: ata1.00: cmd 61/08:20:e8:e5:75/00:00:00:00:00/40 tag 4 ncq 4096 out
res 40/00:01:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
abr 22 12:57:11 echoes kernel: ata1.00: status: { DRDY }
abr 22 12:57:11 echoes kernel: ata1.00: failed command: WRITE FPDMA QUEUED
abr 22 12:57:11 echoes kernel: ata1.00: cmd 61/08:28:80:db:75/00:00:00:00:00/40 tag 5 ncq 4096 out
res 40/00:01:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
abr 22 12:57:11 echoes kernel: ata1.00: status: { DRDY }
abr 22 12:57:11 echoes kernel: ata1.00: failed command: WRITE FPDMA QUEUED
abr 22 12:57:11 echoes kernel: ata1.00: cmd 61/08:30:68:dd:75/00:00:00:00:00/40 tag 6 ncq 4096 out
res 40/00:00:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
abr 22 12:57:11 echoes kernel: ata1.00: status: { DRDY }
abr 22 12:57:11 echoes kernel: ata1.00: failed command: WRITE FPDMA QUEUED
abr 22 12:57:11 echoes kernel: ata1.00: cmd 61/08:38:90:de:75/00:00:00:00:00/40 tag 7 ncq 4096 out
res 40/00:ff:80:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
abr 22 12:57:11 echoes kernel: ata1.00: status: { DRDY }
abr 22 12:57:11 echoes kernel: ata1.00: failed command: WRITE FPDMA QUEUED
abr 22 12:57:11 echoes kernel: ata1.00: cmd 61/08:40:b8:df:75/00:00:00:00:00/40 tag 8 ncq 4096 out
res 40/00:01:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
abr 22 12:57:11 echoes kernel: ata1.00: status: { DRDY }
abr 22 12:57:11 echoes kernel: ata1.00: failed command: WRITE FPDMA QUEUED
abr 22 12:57:11 echoes kernel: ata1.00: cmd 61/08:48:90:e1:75/00:00:00:00:00/40 tag 9 ncq 4096 out
res 40/00:01:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
abr 22 12:57:11 echoes kernel: ata1.00: status: { DRDY }
abr 22 12:57:11 echoes kernel: ata1.00: failed command: WRITE FPDMA QUEUED
abr 22 12:57:11 echoes kernel: ata1.00: cmd 61/08:50:98:e3:75/00:00:00:00:00/40 tag 10 ncq 4096 out
res 40/00:01:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
abr 22 12:57:11 echoes kernel: ata1.00: status: { DRDY }
abr 22 12:57:11 echoes kernel: ata1.00: failed command: WRITE FPDMA QUEUED
abr 22 12:57:11 echoes kernel: ata1.00: cmd 61/08:58:c0:e4:75/00:00:00:00:00/40 tag 11 ncq 4096 out
res 40/00:00:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
abr 22 12:57:11 echoes kernel: ata1.00: status: { DRDY }
abr 22 12:57:11 echoes kernel: ata1.00: failed command: WRITE FPDMA QUEUED
abr 22 12:57:11 echoes kernel: ata1.00: cmd 61/c8:78:28:b9:2a/0b:00:4e:00:00/40 tag 15 ncq 1544192 out
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
abr 22 12:57:11 echoes kernel: ata1.00: status: { DRDY }
abr 22 12:57:11 echoes kernel: ata1.00: failed command: WRITE FPDMA QUEUED
abr 22 12:57:11 echoes kernel: ata1.00: cmd 61/08:80:b0:4b:c0/00:00:4f:00:00/40 tag 16 ncq 4096 out
res 40/00:ff:80:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
abr 22 12:57:11 echoes kernel: ata1.00: status: { DRDY }
abr 22 12:57:11 echoes kernel: ata1.00: failed command: WRITE FPDMA QUEUED
abr 22 12:57:11 echoes kernel: ata1.00: cmd 61/10:88:90:4b:80/00:00:50:00:00/40 tag 17 ncq 8192 out
res 40/00:01:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
abr 22 12:57:11 echoes kernel: ata1.00: status: { DRDY }
abr 22 12:57:11 echoes kernel: ata1.00: failed command: WRITE FPDMA QUEUED
abr 22 12:57:11 echoes kernel: ata1.00: cmd 61/08:90:98:22:81/00:00:50:00:00/40 tag 18 ncq 4096 out
res 40/00:01:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
abr 22 12:57:11 echoes kernel: ata1.00: status: { DRDY }
abr 22 12:57:11 echoes kernel: ata1.00: failed command: WRITE FPDMA QUEUED
abr 22 12:57:11 echoes kernel: ata1.00: cmd 61/08:98:00:0e:00/00:00:5f:00:00/40 tag 19 ncq 4096 out
res 40/00:01:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
abr 22 12:57:11 echoes kernel: ata1.00: status: { DRDY }
abr 22 12:57:11 echoes kernel: ata1.00: failed command: WRITE FPDMA QUEUED
abr 22 12:57:11 echoes kernel: ata1.00: cmd 61/08:a0:00:08:80/00:00:5f:00:00/40 tag 20 ncq 4096 out
res 40/00:ff:ff:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
abr 22 12:57:11 echoes kernel: ata1.00: status: { DRDY }
abr 22 12:57:11 echoes kernel: ata1.00: failed command: WRITE FPDMA QUEUED
abr 22 12:57:11 echoes kernel: ata1.00: cmd 61/08:a8:80:08:80/00:00:5f:00:00/40 tag 21 ncq 4096 out
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
abr 22 12:57:11 echoes kernel: ata1.00: status: { DRDY }
abr 22 12:57:11 echoes kernel: ata1.00: failed command: WRITE FPDMA QUEUED
abr 22 12:57:11 echoes kernel: ata1.00: cmd 61/10:b0:08:0b:81/00:00:5f:00:00/40 tag 22 ncq 8192 out
res 40/00:01:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
abr 22 12:57:11 echoes kernel: ata1.00: status: { DRDY }
abr 22 12:57:11 echoes kernel: ata1.00: failed command: WRITE FPDMA QUEUED
abr 22 12:57:11 echoes kernel: ata1.00: cmd 61/08:b8:70:c8:75/00:00:00:00:00/40 tag 23 ncq 4096 out
res 40/00:00:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
abr 22 12:57:11 echoes kernel: ata1.00: status: { DRDY }
abr 22 12:57:11 echoes kernel: ata1.00: failed command: WRITE FPDMA QUEUED
abr 22 12:57:11 echoes kernel: ata1.00: cmd 61/08:c0:20:c9:75/00:00:00:00:00/40 tag 24 ncq 4096 out
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
abr 22 12:57:11 echoes kernel: ata1.00: status: { DRDY }
abr 22 12:57:11 echoes kernel: ata1.00: failed command: WRITE FPDMA QUEUED
abr 22 12:57:11 echoes kernel: ata1.00: cmd 61/08:c8:88:c9:75/00:00:00:00:00/40 tag 25 ncq 4096 out
res 40/00:01:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
abr 22 12:57:11 echoes kernel: ata1.00: status: { DRDY }
abr 22 12:57:11 echoes kernel: ata1.00: failed command: WRITE FPDMA QUEUED
abr 22 12:57:11 echoes kernel: ata1.00: cmd 61/08:d0:58:ca:75/00:00:00:00:00/40 tag 26 ncq 4096 out
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
abr 22 12:57:11 echoes kernel: ata1.00: status: { DRDY }
abr 22 12:57:11 echoes kernel: ata1.00: failed command: WRITE FPDMA QUEUED
abr 22 12:57:11 echoes kernel: ata1.00: cmd 61/08:d8:a0:ce:75/00:00:00:00:00/40 tag 27 ncq 4096 out
res 40/00:01:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
abr 22 12:57:11 echoes kernel: ata1.00: status: { DRDY }
abr 22 12:57:11 echoes kernel: ata1.00: failed command: WRITE FPDMA QUEUED
abr 22 12:57:11 echoes kernel: ata1.00: cmd 61/08:e0:68:d3:75/00:00:00:00:00/40 tag 28 ncq 4096 out
res 40/00:01:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
abr 22 12:57:11 echoes kernel: ata1.00: status: { DRDY }
abr 22 12:57:11 echoes kernel: ata1.00: failed command: WRITE FPDMA QUEUED
abr 22 12:57:11 echoes kernel: ata1.00: cmd 61/08:e8:90:d4:75/00:00:00:00:00/40 tag 29 ncq 4096 out
res 40/00:01:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
abr 22 12:57:11 echoes kernel: ata1.00: status: { DRDY }
abr 22 12:57:11 echoes kernel: ata1.00: failed command: WRITE FPDMA QUEUED
abr 22 12:57:11 echoes kernel: ata1.00: cmd 61/08:f0:b8:d5:75/00:00:00:00:00/40 tag 30 ncq 4096 out
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
abr 22 12:57:11 echoes kernel: ata1.00: status: { DRDY }
abr 22 12:57:11 echoes kernel: ata1: hard resetting link
abr 22 12:57:11 echoes kernel: ata1: link is slow to respond, please be patient (ready=0)
abr 22 12:57:11 echoes kernel: ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
abr 22 12:57:11 echoes kernel: ata1.00: configured for UDMA/100
abr 22 12:57:11 echoes kernel: ata1.00: device reported invalid CHS sector 0
abr 22 12:57:11 echoes kernel: ata1.00: device reported invalid CHS sector 0
abr 22 12:57:11 echoes kernel: ata1.00: device reported invalid CHS sector 0
abr 22 12:57:11 echoes kernel: ata1.00: device reported invalid CHS sector 0
abr 22 12:57:11 echoes kernel: ata1.00: device reported invalid CHS sector 0
abr 22 12:57:11 echoes kernel: ata1.00: device reported invalid CHS sector 0
abr 22 12:57:11 echoes kernel: ata1.00: device reported invalid CHS sector 0
abr 22 12:57:11 echoes kernel: ata1.00: device reported invalid CHS sector 0
abr 22 12:57:11 echoes kernel: ata1.00: device reported invalid CHS sector 0
abr 22 12:57:11 echoes kernel: ata1.00: device reported invalid CHS sector 0
abr 22 12:57:11 echoes kernel: ata1.00: device reported invalid CHS sector 0
abr 22 12:57:11 echoes kernel: ata1.00: device reported invalid CHS sector 0
abr 22 12:57:11 echoes kernel: ata1.00: device reported invalid CHS sector 0
abr 22 12:57:11 echoes kernel: ata1.00: device reported invalid CHS sector 0
abr 22 12:57:11 echoes kernel: ata1.00: device reported invalid CHS sector 0
abr 22 12:57:11 echoes kernel: ata1.00: device reported invalid CHS sector 0
abr 22 12:57:11 echoes kernel: ata1.00: device reported invalid CHS sector 0
abr 22 12:57:11 echoes kernel: ata1.00: device reported invalid CHS sector 0
abr 22 12:57:11 echoes kernel: ata1.00: device reported invalid CHS sector 0
abr 22 12:57:11 echoes kernel: ata1.00: device reported invalid CHS sector 0
abr 22 12:57:11 echoes kernel: ata1.00: device reported invalid CHS sector 0
abr 22 12:57:11 echoes kernel: ata1.00: device reported invalid CHS sector 0
abr 22 12:57:11 echoes kernel: ata1.00: device reported invalid CHS sector 0
abr 22 12:57:11 echoes kernel: ata1.00: device reported invalid CHS sector 0
abr 22 12:57:11 echoes kernel: sd 0:0:0:0: [sda] UNKNOWN Result: hostbyte=0x00 driverbyte=0x06
abr 22 12:57:11 echoes kernel: sd 0:0:0:0: [sda] CDB:
abr 22 12:57:11 echoes kernel: cdb[0]=0x2a: 2a 00 12 88 d7 c0 00 04 d0 00
abr 22 12:57:11 echoes kernel: blk_update_request: I/O error, dev sda, sector 310958016
abr 22 12:57:11 echoes kernel: EXT4-fs warning (device sda2): ext4_end_bio:317: I/O error -5 writing to inode 36311758 (offset 8388608 size 2695168 starting block 38869906)
abr 22 12:57:11 echoes kernel: Buffer I/O error on device sda2, logical block 19995128
abr 22 12:57:11 echoes kernel: Buffer I/O error on device sda2, logical block 19995129
abr 22 12:57:11 echoes kernel: Buffer I/O error on device sda2, logical block 19995130
abr 22 12:57:11 echoes kernel: Buffer I/O error on device sda2, logical block 19995131
abr 22 12:57:11 echoes kernel: Buffer I/O error on device sda2, logical block 19995132
abr 22 12:57:11 echoes kernel: Buffer I/O error on device sda2, logical block 19995133
abr 22 12:57:11 echoes kernel: Buffer I/O error on device sda2, logical block 19995134
abr 22 12:57:11 echoes kernel: Buffer I/O error on device sda2, logical block 19995135
abr 22 12:57:11 echoes kernel: Buffer I/O error on device sda2, logical block 19995136
abr 22 12:57:11 echoes kernel: Buffer I/O error on device sda2, logical block 19995137
abr 22 12:57:11 echoes kernel: sd 0:0:0:0: [sda] UNKNOWN Result: hostbyte=0x00 driverbyte=0x06
abr 22 12:57:11 echoes kernel: sd 0:0:0:0: [sda] CDB:
abr 22 12:57:11 echoes kernel: cdb[0]=0x2a: 2a 00 4b dd 39 88 00 01 78 00
abr 22 12:57:11 echoes kernel: blk_update_request: I/O error, dev sda, sector 1272789384
abr 22 12:57:11 echoes kernel: EXT4-fs warning (device sda2): ext4_end_bio:317: I/O error -5 writing to inode 34999445 (offset 0 size 192512 starting block 159098720)
abr 22 12:57:11 echoes kernel: sd 0:0:0:0: [sda] UNKNOWN Result: hostbyte=0x00 driverbyte=0x06
abr 22 12:57:11 echoes kernel: sd 0:0:0:0: [sda] CDB:
abr 22 12:57:11 echoes kernel: cdb[0]=0x2a: 2a 00 4e 2a b3 e8 00 05 40 00
abr 22 12:57:11 echoes kernel: blk_update_request: I/O error, dev sda, sector 1311421416
abr 22 12:57:11 echoes kernel: EXT4-fs warning (device sda2): ext4_end_bio:317: I/O error -5 writing to inode 35001016 (offset 0 size 2232320 starting block 163927845)
abr 22 12:57:11 echoes kernel: ata1: EH complete
abr 22 12:57:11 echoes kernel: ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
abr 22 12:57:11 echoes kernel: ata1.00: failed command: CHECK POWER MODE
abr 22 12:57:11 echoes kernel: ata1.00: cmd e5/00:00:00:00:00/00:00:00:00:00/00 tag 25
res 40/00:01:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
abr 22 12:57:11 echoes kernel: ata1.00: status: { DRDY }
abr 22 12:57:11 echoes kernel: ata1: hard resetting link
abr 22 12:57:11 echoes kernel: ata1: link is slow to respond, please be patient (ready=0)
abr 22 12:57:11 echoes kernel: ata1: COMRESET failed (errno=-16)
abr 22 12:57:11 echoes kernel: ata1: hard resetting link
abr 22 12:57:11 echoes kernel: ata1: link is slow to respond, please be patient (ready=0)
abr 22 12:57:11 echoes kernel: ata1: COMRESET failed (errno=-16)
abr 22 12:57:11 echoes kernel: ata1: hard resetting link
abr 22 12:57:11 echoes kernel: ata1: link is slow to respond, please be patient (ready=0)
abr 22 12:57:11 echoes kernel: ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
abr 22 12:57:11 echoes kernel: ata1.00: configured for UDMA/100
abr 22 12:57:11 echoes kernel: ata1: EH complete
Current smart status:
smartctl 6.3 2014-07-26 r3976 [x86_64-linux-4.0.1-1-ARCH] (local build)
Copyright (C) 2002-14, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Toshiba 2.5" HDD MQ01ABD...
Device Model: TOSHIBA MQ01ABD100
Serial Number: Y44MT611T
LU WWN Device Id: 5 000039 5e1a80e85
Firmware Version: AX1P5E
User Capacity: 1,000,204,886,016 bytes [1.00 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 5400 rpm
Form Factor: 2.5 inches
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA8-ACS (minor revision not indicated)
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Sun May 3 16:42:06 2015 ART
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 120) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 234) minutes.
SCT capabilities: (0x003d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000b 100 100 050 Pre-fail Always - 0
2 Throughput_Performance 0x0005 100 100 050 Pre-fail Offline - 0
3 Spin_Up_Time 0x0027 100 100 001 Pre-fail Always - 1671
4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 306
5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 152
7 Seek_Error_Rate 0x000b 100 100 050 Pre-fail Always - 0
8 Seek_Time_Performance 0x0005 100 100 050 Pre-fail Offline - 0
9 Power_On_Hours 0x0032 099 099 000 Old_age Always - 699
10 Spin_Retry_Count 0x0033 106 100 030 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 300
191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 216
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 14
193 Load_Cycle_Count 0x0032 099 099 000 Old_age Always - 14140
194 Temperature_Celsius 0x0022 100 100 000 Old_age Always - 34 (Min/Max 16/44)
196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 19
197 Current_Pending_Sector 0x0032 100 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0030 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0
220 Disk_Shift 0x0002 100 100 000 Old_age Always - 0
222 Loaded_Hours 0x0032 099 099 000 Old_age Always - 515
223 Load_Retry_Count 0x0032 100 100 000 Old_age Always - 0
224 Load_Friction 0x0022 100 100 000 Old_age Always - 0
226 Load-in_Time 0x0026 100 100 000 Old_age Always - 190
240 Head_Flying_Hours 0x0001 100 100 001 Pre-fail Offline - 0
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Vendor (0x50) Completed without error 00% 611 -
# 2 Short offline Completed without error 00% 611 -
# 3 Short offline Completed without error 00% 597 -
# 4 Vendor (0x50) Completed without error 00% 583 -
# 5 Short offline Completed without error 00% 583 -
# 6 Vendor (0x50) Completed without error 00% 575 -
# 7 Short offline Completed without error 00% 575 -
# 8 Short offline Completed without error 00% 547 -
# 9 Extended offline Completed without error 00% 529 -
#10 Short offline Completed without error 00% 355 -
#11 Short offline Completed without error 00% 355 -
#12 Extended offline Aborted by host 70% 355 -
#13 Short offline Completed without error 00% 319 -
#14 Vendor (0x50) Completed without error 00% 13 -
#15 Short offline Completed without error 00% 13 -
#16 Short offline Completed without error 00% 12 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
Kernels used have been from 3.9 to current: Linux echoes 4.0.1-1-ARCH #1 SMP PREEMPT Wed Apr 29 12:00:26 CEST 2015 x86_64 GNU/Linux
Last edited by jesu (2015-05-03 19:42:53)Something i'd noticed both the first time i was on arch and now i've reinstalled it, was that at first i didn't have this problem. I mean, when Arch was just installed. While i was installing and setting up everything.
Now, i'm not 100% sure about this, but i think problems began when using my current user. Disk is partitioned the following way:
$ lsblk
NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT
sda 8:0 0 931,5G 0 disk
├─sda1 8:1 0 1000M 0 part
├─sda2 8:2 0 260M 0 part /boot
├─sda3 8:3 0 207,7G 0 part
├─sda4 8:4 0 25G 0 part
├─sda5 8:5 0 14,8G 0 part
├─sda6 8:6 0 80,5G 0 part /
├─sda8 8:8 0 599G 0 part /home
└─sda9 8:9 0 2G 0 part [SWAP]
So, i believe problems, for some reason, are related (and were related), both before and now, to the /home partition, /dev/sda8 in this ocassion.
Because of this, i booted into systemd rescue mode, like root, rw, and unmounted /home partition. Despite root-only limitations, i used the system for a couple of hours, started lxqt, browsed the web mainly, and experienced no problem at all.
Now i booted normally, with my regular user, and these problems are experienced just like before (and almost instantly, like 3 or 5 minutes after starting system use).
dmesg this time showed a some different log, though it's not the first time i see this. I just didn't saved that kind of log before.
[ 653.821719] ata1.00: exception Emask 0x0 SAct 0x100 SErr 0x0 action 0x6 frozen
[ 653.821726] ata1.00: failed command: READ FPDMA QUEUED
[ 653.821732] ata1.00: cmd 60/08:40:60:25:43/00:00:1b:00:00/40 tag 8 ncq 4096 in
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 653.821735] ata1.00: status: { DRDY }
[ 653.821739] ata1: hard resetting link
[ 659.156760] ata1: link is slow to respond, please be patient (ready=0)
[ 663.851604] ata1: COMRESET failed (errno=-16)
[ 663.851610] ata1: hard resetting link
[ 669.186591] ata1: link is slow to respond, please be patient (ready=0)
[ 673.881456] ata1: COMRESET failed (errno=-16)
[ 673.881462] ata1: hard resetting link
[ 679.216481] ata1: link is slow to respond, please be patient (ready=0)
[ 702.743982] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 703.012578] ata1.00: configured for UDMA/100
[ 703.012584] ata1.00: device reported invalid CHS sector 0
[ 703.012599] ata1: EH complete
[ 714.097642] systemd[1]: systemd-journald.service watchdog timeout (limit 1min)!
[ 742.443488] sd 0:0:0:0: [sda] tag#18 UNKNOWN(0x2003) Result: hostbyte=0x00 driverbyte=0x06
[ 742.443494] sd 0:0:0:0: [sda] tag#18 CDB: opcode=0x2a 2a 00 28 c3 c6 40 00 00 10 00
[ 742.443497] blk_update_request: I/O error, dev sda, sector 683918912
[ 742.443503] EXT4-fs warning (device sda8): ext4_end_bio:317: I/O error -5 writing to inode 20322020 (offset 0 size 0 starting block 85489866)
[ 742.443506] Buffer I/O error on device sda8, logical block 9323208
[ 742.443508] Buffer I/O error on device sda8, logical block 9323209
[ 742.443515] sd 0:0:0:0: [sda] tag#19 UNKNOWN(0x2003) Result: hostbyte=0x00 driverbyte=0x06
[ 742.443518] sd 0:0:0:0: [sda] tag#19 CDB: opcode=0x2a 2a 00 28 c3 c6 80 00 00 10 00
[ 742.443520] blk_update_request: I/O error, dev sda, sector 683918976
[ 742.443522] EXT4-fs warning (device sda8): ext4_end_bio:317: I/O error -5 writing to inode 20322020 (offset 0 size 0 starting block 85489874)
[ 742.443524] Buffer I/O error on device sda8, logical block 9323216
[ 742.443526] Buffer I/O error on device sda8, logical block 9323217
[ 742.443531] sd 0:0:0:0: [sda] tag#20 UNKNOWN(0x2003) Result: hostbyte=0x00 driverbyte=0x06
[ 742.443534] sd 0:0:0:0: [sda] tag#20 CDB: opcode=0x2a 2a 00 28 c3 c6 d0 00 00 10 00
[ 742.443536] blk_update_request: I/O error, dev sda, sector 683919056
[ 742.443538] EXT4-fs warning (device sda8): ext4_end_bio:317: I/O error -5 writing to inode 20322020 (offset 0 size 0 starting block 85489884)
[ 742.443540] Buffer I/O error on device sda8, logical block 9323226
[ 742.443542] Buffer I/O error on device sda8, logical block 9323227
[ 742.443547] sd 0:0:0:0: [sda] tag#21 UNKNOWN(0x2003) Result: hostbyte=0x00 driverbyte=0x06
[ 742.443549] sd 0:0:0:0: [sda] tag#21 CDB: opcode=0x2a 2a 00 28 c3 c7 10 00 00 10 00
[ 742.443551] blk_update_request: I/O error, dev sda, sector 683919120
[ 742.443553] EXT4-fs warning (device sda8): ext4_end_bio:317: I/O error -5 writing to inode 20322020 (offset 0 size 0 starting block 85489892)
[ 742.443555] Buffer I/O error on device sda8, logical block 9323234
[ 742.443557] Buffer I/O error on device sda8, logical block 9323235
[ 756.187685] systemd[1]: systemd-journald.service: main process exited, code=dumped, status=6/ABRT
[ 756.187986] systemd[1]: Unit systemd-journald.service entered failed state.
[ 756.188116] systemd[1]: systemd-journald.service failed.
[ 756.188474] systemd[1]: systemd-journald.service has no holdoff time, scheduling restart.
[ 756.189106] systemd[1]: Stopping Flush Journal to Persistent Storage...
[ 756.189143] systemd[1]: Listening on Journal Audit Socket.
[ 756.189801] systemd[1]: Starting Journal Service...
[ 757.525493] systemd-coredump[1038]: Detected coredump of the journal daemon itself, diverted to /var/lib/systemd/coredump/core.systemd-journal.0.b8610e85f9074a418534aaee0adbac56.141.1430763073000000.lz4.
[ 758.133944] systemd-journald[1050]: File /var/log/journal/f646626ba4b647f48501020bf12ca33b/system.journal corrupted or uncleanly shut down, renaming and replacing.
[ 758.503041] systemd[1]: Started Journal Service.
[ 759.180771] systemd-journald[1050]: File /var/log/journal/f646626ba4b647f48501020bf12ca33b/user-1000.journal corrupted or uncleanly shut down, renaming and replacing.
[ 974.867721] ata1.00: exception Emask 0x0 SAct 0x3f80 SErr 0x0 action 0x6 frozen
[ 974.867732] ata1.00: failed command: WRITE FPDMA QUEUED
[ 974.867742] ata1.00: cmd 61/08:38:68:d3:c5/00:00:1a:00:00/40 tag 7 ncq 4096 out
res 40/00:01:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 974.867747] ata1.00: status: { DRDY }
[ 974.867751] ata1.00: failed command: WRITE FPDMA QUEUED
[ 974.867759] ata1.00: cmd 61/08:40:88:d3:c5/00:00:1a:00:00/40 tag 8 ncq 4096 out
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 974.867763] ata1.00: status: { DRDY }
[ 974.867767] ata1.00: failed command: WRITE FPDMA QUEUED
[ 974.867774] ata1.00: cmd 61/08:48:a0:d3:c5/00:00:1a:00:00/40 tag 9 ncq 4096 out
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 974.867778] ata1.00: status: { DRDY }
[ 974.867781] ata1.00: failed command: WRITE FPDMA QUEUED
[ 974.867789] ata1.00: cmd 61/20:50:c0:d3:c5/00:00:1a:00:00/40 tag 10 ncq 16384 out
res 40/00:00:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 974.867793] ata1.00: status: { DRDY }
[ 974.867796] ata1.00: failed command: WRITE FPDMA QUEUED
[ 974.867803] ata1.00: cmd 61/10:58:f0:d3:c5/00:00:1a:00:00/40 tag 11 ncq 8192 out
res 40/00:01:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 974.867807] ata1.00: status: { DRDY }
[ 974.867810] ata1.00: failed command: WRITE FPDMA QUEUED
[ 974.867817] ata1.00: cmd 61/08:60:10:d4:c5/00:00:1a:00:00/40 tag 12 ncq 4096 out
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 974.867821] ata1.00: status: { DRDY }
[ 974.867824] ata1.00: failed command: WRITE FPDMA QUEUED
[ 974.867831] ata1.00: cmd 61/18:68:28:d4:c5/00:00:1a:00:00/40 tag 13 ncq 12288 out
res 40/00:01:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 974.867835] ata1.00: status: { DRDY }
[ 974.867841] ata1: hard resetting link
[ 980.202774] ata1: link is slow to respond, please be patient (ready=0)
[ 984.900902] ata1: COMRESET failed (errno=-16)
[ 984.900908] ata1: hard resetting link
[ 990.236024] ata1: link is slow to respond, please be patient (ready=0)
[ 994.930829] ata1: COMRESET failed (errno=-16)
[ 994.930836] ata1: hard resetting link
[ 996.798104] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 997.014012] ata1.00: configured for UDMA/100
[ 997.014020] ata1.00: device reported invalid CHS sector 0
[ 997.014023] ata1.00: device reported invalid CHS sector 0
[ 997.014025] ata1.00: device reported invalid CHS sector 0
[ 997.014026] ata1.00: device reported invalid CHS sector 0
[ 997.014028] ata1.00: device reported invalid CHS sector 0
[ 997.014030] ata1.00: device reported invalid CHS sector 0
[ 997.014031] ata1.00: device reported invalid CHS sector 0
[ 997.014065] ata1: EH complete
There are some sda8 (home) related messages. I also found these messages first time Arch was installed (i think also related to home partition).
root and home partitions are both ext4. -
Time Machine couldn't complete the backup due to a network problem
Firstly apologies for the long post, I've been bottling these problems up and could now use some expert advice.
I have a MacPro (10.6.3) with four internal drives (320GB system/apps. + 3x 750GB data, images etc) and a MacBook Pro (10.6.6) with a 320GB internal. With so much accumulated data (Mac user since SE FDHD) I wanted a reliable means to backup all my projects, books, papers, research, images etc. I had several bad experiences using Iomega drives (Ultramax and Storcentre) which were not very Mac compatible and shifted over to a 10TB LaCie 5Big Network 2 which is promoted as Time Machine compatible. Set up Time Machine (with a few hiccups) in Sept 2010 and it ran perfectly, backing up both main computers until March 2011. I have now experienced a string of problems backing up the MacPro, some of which have been resolved speaking to people, some by checking forums and some by using my own noddle to figure it out. The latest error message I am getting is "Time Machine couldn't complete the backup due to a network problem. Make sure your computer and the backup disc are on the same network, and that the backup disc is turned on. Then try again to back up."
The circumstances of this are as follows: TM seems to be trying to completely back up everything already backed up from previous months so I am using the "exclude" option to do this in manageable chunks (5.54TB of 7.99TB is available so there is a lot of stuff on there, hence my reticence to erase and start again). I started a backup last night which said it was 242GB and when I came back hours later (I estimate 30GB and hour or 500MB a minute) it has failed with the error message above. I asked it to back up again and it said it now had 191GB to backup, at the next failure it was 142GB, dropping by approx 50GB a time (if there a maximum it can manage in one go?), the next time it was starting again with 242GB.
I checked the disc it was backing up to, discovered it was now selecting Public-1, re-selected Public which houses the macpro.sparsebundle, dropped the backup size (Options) to 73GB and set it off again and it is backing up as I write. I am hoping it will complete and permit another chunk to be backup but the fact it looses network connection (seemingly) or has a maximum backup in one go, is annoying because it means you cannot leave it overnight and trust it to do the backups.
The other problem seems to be a shut down by LaCie 5Big because several times (and once this morning) I have had this message "The file server "LaCie 5Big" has closed down, followed by a complete Lacie shut down and auto-reboot with all lights and whistles. Lacie think this could be a power supply problem and say they are sending me another power brick. They also say they do not support Time Machine (they should check their own literature) and suggest I use LaCie 5Big for 'drag and drop' backup. If I wanted to do that I could pick up a cheap and nasty HD from PCWorld, not this high end 10TB drive which cost over £1,000 !
For a while y'day I could not even find the Lacie on the network but after changing the ethernet cable from Lacie to router (Linksys) it miraculously re-appeared so that problem may have been the original Lacie blue ethernet cable had developed a fault. Checking cables is an oft-overlooked option.
A catalogue of errors, some solved, others still all pervading, so any words from the wise would be gratefully accepted.I verified the macpro.sparsebundle and Time Machine backups in Disk Utility and it said both appeared to be Okay in green type. So that did not solve the issue. I did a Disk Utility repair a day or so again (despite Verify saying everything was fine) and said there was nothing to repair. I suspect two problems, the power brick may be faulty producing intermittent power and maybe causing the drive to close down (hopefully Lacie will send me a replacement to try) and second, I am thinking the network connection is getting dropped causing crashed backups without the Lacie shutdown/reboot sequence. The 73GB back up failed, I started it again at 54GB and it failed again, just started it again at 45GB - this is no way to progress!
Perhaps the relatively new (last year) Linksys router is the problem, I find my MBP says AirPort is active but it fails to appear in Go>Server unless I switch it off and on again and perhaps a similar problem drops the connnection to the Lacie. -
After installing Leopard, my G4 will no longer boot in OS 9.22.
(Classic still works, but I need it to boot in OS 9.)
Any clues about what the Leopard installer might have done to my machine that rendered OS 9 boot unusable? (And what can I do to fix it?)
Details:
G4 Gigabit Ethernet
Boot ROM version: 4.2.8fl
Accelerator card added: 1.6 MHz
1.5 Gig Ram
I have erased the partition that had Leopard installed on it.
I zapped the pram.
In Open Firmware, I "reset-nvram", and then "reset-all"
I tried to reinstall G4 FW Update 4.2.8, but that must be done when booted from OS 9, and of course, that's the problem: it won't boot into 9.
I tried restarting from 9.2.1 DVD.
I tried restarting from an external firewire drive containing OS 9.2.2.
I tried moving a fresh OS 9.2.2 system folder into an empty partition on an internal hard drive. (Partition was created WITH OS 9 drivers installed.)
All attempts to boot into OS 9 give me the same results - grey screen - no spinning beach ball, no icons or logos - just a blank grey screen.
This machine still works fine in OS 10.3 and 10.4, and it worked fine for many years booting into OS 9, until I installed Leopard, and I haven't been able to boot into OS 9 since then, although I have done considerable research online and tried many things.
I have since learned that this machine does not support Leopard - 10.5. Fine, but how did it break 9.2.2?
Any help greatly appreciated.Thanks for checking in, BDAQua.
Problem solved.
In the docs that came with my Powerlogix accelerator card, I found this sentence buried:
"If you reset the PRAM, the NVRAM code for OS9 compatibility is cleared, so you will have to boot from the Firmawre Update CD and perform this process again in order to boot in OS9."
The "process" it's referring to is the process of setting up the NVRAM for booting into OS9 from the CD.
Fortunately, I was able to find the disk, and it worked as expected. I can now, once again boot into OS9.
Conclusion: My (unadvised) attempt to load Leopard on this old machine apparently reset the PRAM on the accelerator card and cleared the NVRAM code for OS9 boot. Although I did attempt to reset the NVRAM via Open Firmware, it did not reset it on the accelerator card.
So, thank you BDAQua, for your "Ah yes" . . . that's all I needed to steer me in the right direction.
Gratefully,
tupester -
Greetings,
Well, now that I have repaired the fan problem, I am afraid I have created one.
My T60p originally had a drive with two partitions on it. A 90GB primary partition, and a 5GB secondary partition. Since I had to re-install the OS, the 5GB partition is no longer in use.
I tried to user Hirens utilities like Fdisk to see if I could use the space. I tried formating the space with an NTFS file system. That is all I did. Since then, the machine no longer boots.
However, using Hirens utilities, and instead of booting with the Hirens disk, I choose to boot from the hard drive, using NTFS. The machine booted fine so all my information is there.
How do I get it to boot without the Hirens disk now? It no longer gives me access to the programs that were on the disk....
Regards,
Jean-Pierre
P.S. I am trying to fix this myself, as with all issues on my laptop, before I take it to the Geek Squad. Thank you
for your input.
Here are the specs of the machine.
Thinkpad T60p
2007-8EU
Moderator Note; s/n edited for member's own protection
Solved!
Go to Solution.Hello,
It sounds like the primary partition may no longer be marked as "startable" or "active" in the partition table of data located at the end of the master boot record, which is what the MBR code uses to determine which partition's boot sector to load.
If you have a Windows XP installation disc, you can try booting from that, starting the Recovery Console (instead of an operating system installation) and using the FixMBR and FixBoot commands to repair the MBR and boot sector (for good measure), respectively.
Regards,
Aryeh Goretsky
I am a volunteer and neither a Lenovo nor a Microsoft employee. • Dexter is a good dog • Dexter je dobrý pes
S230u (3347-4HU) • X220 (4286-CTO) • W510 (4318-CTO) • W530 (2441-4R3) • X100e (3508-CTO) • X120e (0596-CTO) • T61p (6459-CTO) • T43p (2678-H7U) • T42 (2378-R4U) • T23 (2648-LU7)
Deutsche Community Comunidad en Español Русскоязычное Сообщество -
I have a very long boot time with my Arch.
Startup finished in 828766ms (kernel) + 63430ms (userspace) = 892196ms
Especially after login into gnome, it takes quite a while until the desktop is visible. In meanwhile, I only see the wallpaper. Does anyone has a suggestion how to fix that?
Linux hostname 3.6.6-1-ARCH #1 SMP PREEMPT Mon Nov 5 11:57:22 CET 2012 x86_64 GNU/Linux
systemd-analzye blame shows
18722ms colord.service
16584ms home.mount
12666ms plymouth-start.service
11550ms boot.mount
11350ms var.mount
7604ms NetworkManager.service
7261ms chrony.service
1985ms wpa_supplicant.service
1606ms systemd-modules-load.service
1350ms systemd-tmpfiles-setup.service
1202ms dev-hugepages.mount
1189ms dev-mqueue.mount
1080ms sys-kernel-debug.mount
987ms systemd-udev-trigger.service
946ms systemd-udevd.service
879ms systemd-vconsole-setup.service
495ms bluetooth.service
376ms polkit.service
358ms crashplan.service
348ms systemd-readahead-replay.service
346ms lm_sensors.service
337ms upower.service
331ms systemd-readahead-collect.service
311ms systemd-logind.service
289ms lvmetad.service
286ms systemd-binfmt.service
242ms cpupower.service
206ms systemd-remount-fs.service
174ms gdm.service
140ms proc-sys-fs-binfmt_misc.mount
94ms udisks2.service
93ms rtkit-daemon.service
87ms rc-local.service
86ms systemd-user-sessions.service
53ms systemd-sysctl.service
24ms accounts-daemon.service
2ms tmp.mount
1ms sys-fs-fuse-connections.mount
Dmesg shows:
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.6.6-1-ARCH (tobias@T-POWA-LX) (gcc version 4.7.2 (GCC) ) #1 SMP PREEMPT Mon Nov 5 11:57:22 CET 2012
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-linux root=/dev/mapper/cryptpool-cryptroot ro quiet splash cryptdevice=/dev/sda2:cryptvol init=/usr/lib/systemd/systemd radeon.modeset=1 pcie_aspm=force
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009c3ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009c400-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000d2000-0x00000000000d3fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000c727bfff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000c727c000-0x00000000c7281fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000c7282000-0x00000000c73ebfff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000c73ec000-0x00000000c740efff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000c740f000-0x00000000c746efff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000c746f000-0x00000000c746ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000c7470000-0x00000000c74f0fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000c74f1000-0x00000000c770efff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000c770f000-0x00000000c7717fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000c7718000-0x00000000c771efff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000c771f000-0x00000000c7770fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000c7771000-0x00000000c779efff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000c779f000-0x00000000c77e1fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000c77e2000-0x00000000c77fefff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000c77ff000-0x00000000c77fffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000c7800000-0x00000000c7ffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f1004000-0x00000000f1004fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec0ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed003ff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed8ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x0000000237ffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI present.
[ 0.000000] DMI: Dell Inc. Studio XPS 1645/0Y517R, BIOS A13 04/01/2011
[ 0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] No AGP bridge found
[ 0.000000] e820: last_pfn = 0x238000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-D3FFF write-through
[ 0.000000] D4000-D7FFF uncachable
[ 0.000000] D8000-FFFFF write-through
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0FFE00000 mask FFFE00000 write-protect
[ 0.000000] 1 base 000000000 mask F80000000 write-back
[ 0.000000] 2 base 080000000 mask FC0000000 write-back
[ 0.000000] 3 base 0C0000000 mask FF8000000 write-back
[ 0.000000] 4 base 100000000 mask F00000000 write-back
[ 0.000000] 5 base 200000000 mask FE0000000 write-back
[ 0.000000] 6 base 220000000 mask FF0000000 write-back
[ 0.000000] 7 base 230000000 mask FF8000000 write-back
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820: last_pfn = 0xc7800 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000f7360-0x000f736f] mapped at [ffff8800000f7360]
[ 0.000000] initial memory mapped: [mem 0x00000000-0x1fffffff]
[ 0.000000] Base memory trampoline at [ffff880000096000] 96000 size 24576
[ 0.000000] init_memory_mapping: [mem 0x00000000-0xc77fffff]
[ 0.000000] [mem 0x00000000-0xc77fffff] page 2M
[ 0.000000] kernel direct mapping tables up to 0xc77fffff @ [mem 0x1fffb000-0x1fffffff]
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x237ffffff]
[ 0.000000] [mem 0x100000000-0x237ffffff] page 2M
[ 0.000000] kernel direct mapping tables up to 0x237ffffff @ [mem 0xc77dc000-0xc77e1fff]
[ 0.000000] RAMDISK: [mem 0x376e0000-0x37b67fff]
[ 0.000000] ACPI: RSDP 00000000000f7280 00024 (v02 PTLTD )
[ 0.000000] ACPI: XSDT 00000000c77f4285 00064 (v01 DELL QA09 06040000 LTP 00000000)
[ 0.000000] ACPI: FACP 00000000c77e4000 000F4 (v03 INTEL CRESTLNE 06040000 ALAN 00000001)
[ 0.000000] ACPI: DSDT 00000000c77e5000 0A839 (v02 Intel CALPELLA 06040000 INTL 20060912)
[ 0.000000] ACPI: FACS 00000000c779bfc0 00040
[ 0.000000] ACPI: HPET 00000000c77fecc2 00038 (v01 INTEL CRESTLNE 06040000 LOHR 0000005A)
[ 0.000000] ACPI: MCFG 00000000c77fecfa 0003C (v01 INTEL CRESTLNE 06040000 LOHR 0000005A)
[ 0.000000] ACPI: APIC 00000000c77fed36 000BC (v01 PTLTD ? APIC 06040000 LTP 00000000)
[ 0.000000] ACPI: BOOT 00000000c77fedf2 00028 (v01 PTLTD $SBFTBL$ 06040000 LTP 00000001)
[ 0.000000] ACPI: SLIC 00000000c77fee1a 00176 (v01 DELL QA09 06040000 LTP 00000000)
[ 0.000000] ACPI: OSFR 00000000c77fef90 00070 (v01 DELL DELL 06040000 ASL 00000061)
[ 0.000000] ACPI: SSDT 00000000c77e3000 009F1 (v01 PmRef CpuPm 00003000 INTL 20060912)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x0000000237ffffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x237ffffff]
[ 0.000000] NODE_DATA [mem 0x237ffc000-0x237ffffff]
[ 0.000000] [ffffea0000000000-ffffea0008dfffff] PMD -> [ffff88022f600000-ffff8802375fffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00010000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x237ffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00010000-0x0009bfff]
[ 0.000000] node 0: [mem 0x00100000-0xc727bfff]
[ 0.000000] node 0: [mem 0xc7282000-0xc73ebfff]
[ 0.000000] node 0: [mem 0xc740f000-0xc746efff]
[ 0.000000] node 0: [mem 0xc770f000-0xc7717fff]
[ 0.000000] node 0: [mem 0xc771f000-0xc7770fff]
[ 0.000000] node 0: [mem 0xc779f000-0xc77e1fff]
[ 0.000000] node 0: [mem 0xc77ff000-0xc77fffff]
[ 0.000000] node 0: [mem 0x100000000-0x237ffffff]
[ 0.000000] On node 0 totalpages: 2094193
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 6 pages reserved
[ 0.000000] DMA zone: 3910 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 16320 pages used for memmap
[ 0.000000] DMA32 zone: 795941 pages, LIFO batch:31
[ 0.000000] Normal zone: 19968 pages used for memmap
[ 0.000000] Normal zone: 1257984 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x06] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009c000 - 000000000009d000
[ 0.000000] PM: Registered nosave memory: 000000000009d000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000d2000
[ 0.000000] PM: Registered nosave memory: 00000000000d2000 - 00000000000d4000
[ 0.000000] PM: Registered nosave memory: 00000000000d4000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000c727c000 - 00000000c7282000
[ 0.000000] PM: Registered nosave memory: 00000000c73ec000 - 00000000c740f000
[ 0.000000] PM: Registered nosave memory: 00000000c746f000 - 00000000c7470000
[ 0.000000] PM: Registered nosave memory: 00000000c7470000 - 00000000c74f1000
[ 0.000000] PM: Registered nosave memory: 00000000c74f1000 - 00000000c770f000
[ 0.000000] PM: Registered nosave memory: 00000000c7718000 - 00000000c771f000
[ 0.000000] PM: Registered nosave memory: 00000000c7771000 - 00000000c779f000
[ 0.000000] PM: Registered nosave memory: 00000000c77e2000 - 00000000c77ff000
[ 0.000000] PM: Registered nosave memory: 00000000c7800000 - 00000000c8000000
[ 0.000000] PM: Registered nosave memory: 00000000c8000000 - 00000000e0000000
[ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
[ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000f1004000
[ 0.000000] PM: Registered nosave memory: 00000000f1004000 - 00000000f1005000
[ 0.000000] PM: Registered nosave memory: 00000000f1005000 - 00000000fec00000
[ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec10000
[ 0.000000] PM: Registered nosave memory: 00000000fec10000 - 00000000fed00000
[ 0.000000] PM: Registered nosave memory: 00000000fed00000 - 00000000fed1c000
[ 0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed90000
[ 0.000000] PM: Registered nosave memory: 00000000fed90000 - 00000000fee00000
[ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
[ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ff000000
[ 0.000000] PM: Registered nosave memory: 00000000ff000000 - 0000000100000000
[ 0.000000] e820: [mem 0xc8000000-0xdfffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff880237c00000 s84608 r8192 d21888 u262144
[ 0.000000] pcpu-alloc: s84608 r8192 d21888 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2057835
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=/dev/mapper/cryptpool-cryptroot ro quiet splash cryptdevice=/dev/sda2:cryptvol init=/usr/lib/systemd/systemd radeon.modeset=1 pcie_aspm=force
[ 0.000000] PCIe ASPM is forcibly enabled
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] __ex_table already sorted, skipping sort
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 8162844k/9306112k available (4727k kernel code, 929340k absent, 213928k reserved, 4143k data, 768k init)
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=8.
[ 0.000000] NR_IRQS:4352 nr_irqs:744 16
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 33554432 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.003333] tsc: Detected 1596.068 MHz processor
[ 0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 3193.14 BogoMIPS (lpj=5320226)
[ 0.000006] pid_max: default: 32768 minimum: 301
[ 0.000044] Security Framework initialized
[ 0.000048] AppArmor: AppArmor disabled by boot time parameter
[ 0.000771] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.003000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.003923] Mount-cache hash table entries: 256
[ 0.004173] Initializing cgroup subsys cpuacct
[ 0.004176] Initializing cgroup subsys memory
[ 0.004184] Initializing cgroup subsys devices
[ 0.004186] Initializing cgroup subsys freezer
[ 0.004188] Initializing cgroup subsys net_cls
[ 0.004189] Initializing cgroup subsys blkio
[ 0.004216] CPU: Physical Processor ID: 0
[ 0.004217] CPU: Processor Core ID: 0
[ 0.004222] mce: CPU supports 9 MCE banks
[ 0.004234] CPU0: Thermal monitoring enabled (TM1)
[ 0.004241] process: using mwait in idle threads
[ 0.004246] Last level iTLB entries: 4KB 512, 2MB 7, 4MB 7
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
tlb_flushall_shift is 0x6
[ 0.005569] ACPI: Core revision 20120711
[ 0.021739] ftrace: allocating 18347 entries in 72 pages
[ 0.034527] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.067503] smpboot: CPU0: Intel(R) Core(TM) i7 CPU Q 720 @ 1.60GHz stepping 05
[ 0.172651] Performance Events: PEBS fmt1+, 16-deep LBR, Nehalem events, Intel PMU driver.
[ 0.172658] perf_event_intel: CPU erratum AAJ80 worked around
[ 0.172659] perf_event_intel: CPUID marked event: 'bus cycles' unavailable
[ 0.172661] ... version: 3
[ 0.172662] ... bit width: 48
[ 0.172663] ... generic registers: 4
[ 0.172665] ... value mask: 0000ffffffffffff
[ 0.172666] ... max period: 000000007fffffff
[ 0.172667] ... fixed-purpose events: 3
[ 0.172669] ... event mask: 000000070000000f
[ 0.199435] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.212646] smpboot: Booting Node 0, Processors #1 #2 #3 #4 #5 #6 #7 OK
[ 0.379170] Brought up 8 CPUs
[ 0.379175] smpboot: Total of 8 processors activated (25547.13 BogoMIPS)
[ 0.385494] devtmpfs: initialized
[ 0.387562] PM: Registering ACPI NVS region [mem 0xc7470000-0xc74f0fff] (528384 bytes)
[ 0.387574] PM: Registering ACPI NVS region [mem 0xc7771000-0xc779efff] (188416 bytes)
[ 0.388860] NET: Registered protocol family 16
[ 0.389041] ACPI: bus type pci registered
[ 0.389136] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.389139] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.432597] PCI: Using configuration type 1 for base access
[ 0.433425] bio: create slab <bio-0> at 0
[ 0.433488] ACPI: Added _OSI(Module Device)
[ 0.433490] ACPI: Added _OSI(Processor Device)
[ 0.433491] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.433493] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.435530] ACPI: EC: Look up EC in DSDT
[ 0.437476] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.442713] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.443644] ACPI: SSDT 00000000c771aa98 002E8 (v01 PmRef Cpu0Ist 00003000 INTL 20060912)
[ 0.444142] ACPI: Dynamic OEM Table Load:
[ 0.444145] ACPI: SSDT (null) 002E8 (v01 PmRef Cpu0Ist 00003000 INTL 20060912)
[ 0.444332] ACPI: SSDT 00000000c7719018 008B0 (v01 PmRef Cpu0Cst 00003001 INTL 20060912)
[ 0.444806] ACPI: Dynamic OEM Table Load:
[ 0.444809] ACPI: SSDT (null) 008B0 (v01 PmRef Cpu0Cst 00003001 INTL 20060912)
[ 0.445201] ACPI: SSDT 00000000c771a718 00303 (v01 PmRef ApIst 00003000 INTL 20060912)
[ 0.445749] ACPI: Dynamic OEM Table Load:
[ 0.445753] ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20060912)
[ 0.445922] ACPI: SSDT 00000000c7718d98 00119 (v01 PmRef ApCst 00003000 INTL 20060912)
[ 0.446432] ACPI: Dynamic OEM Table Load:
[ 0.446435] ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20060912)
[ 0.448062] ACPI: Interpreter enabled
[ 0.448066] ACPI: (supports S0 S3 S4 S5)
[ 0.448089] ACPI: Using IOAPIC for interrupt routing
[ 0.448593] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[ 0.455392] ACPI: Power Resource [FN00] (off)
[ 0.455494] ACPI: Power Resource [FN01] (off)
[ 0.456110] ACPI: EC: GPE = 0x16, I/O: command/status = 0x66, data = 0x62
[ 0.456339] ACPI: No dock devices found.
[ 0.456343] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.456813] \_SB_.PCI0:_OSC invalid UUID
[ 0.456815] _OSC request data:1 8 1f
[ 0.456820] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[ 0.457600] PCI host bridge to bus 0000:00
[ 0.457604] pci_bus 0000:00: busn_res: [bus 00-fe] is inserted under domain [bus 00-ff]
[ 0.457607] pci_bus 0000:00: root bus resource [bus 00-fe]
[ 0.457610] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.457612] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.457615] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.457617] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
[ 0.457619] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
[ 0.457622] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
[ 0.457624] pci_bus 0000:00: root bus resource [mem 0xc8000000-0xdfffffff]
[ 0.457627] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfebfffff]
[ 0.457638] pci 0000:00:00.0: [8086:d132] type 00 class 0x060000
[ 0.457700] pci 0000:00:03.0: [8086:d138] type 01 class 0x060400
[ 0.457759] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
[ 0.457783] pci 0000:00:08.0: [8086:d155] type 00 class 0x088000
[ 0.457850] pci 0000:00:08.1: [8086:d156] type 00 class 0x088000
[ 0.457917] pci 0000:00:08.2: [8086:d157] type 00 class 0x088000
[ 0.457983] pci 0000:00:08.3: [8086:d158] type 00 class 0x088000
[ 0.458043] pci 0000:00:10.0: [8086:d150] type 00 class 0x088000
[ 0.458094] pci 0000:00:10.1: [8086:d151] type 00 class 0x088000
[ 0.458170] pci 0000:00:1a.0: [8086:3b3c] type 00 class 0x0c0320
[ 0.458194] pci 0000:00:1a.0: reg 10: [mem 0xf1005800-0xf1005bff]
[ 0.458289] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.458318] pci 0000:00:1b.0: [8086:3b56] type 00 class 0x040300
[ 0.458335] pci 0000:00:1b.0: reg 10: [mem 0xf1000000-0xf1003fff 64bit]
[ 0.458409] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.458432] pci 0000:00:1c.0: [8086:3b42] type 01 class 0x060400
[ 0.458508] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.458533] pci 0000:00:1c.1: [8086:3b44] type 01 class 0x060400
[ 0.458609] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.458635] pci 0000:00:1c.3: [8086:3b48] type 01 class 0x060400
[ 0.458710] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.458735] pci 0000:00:1c.4: [8086:3b4a] type 01 class 0x060400
[ 0.458810] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.458835] pci 0000:00:1c.5: [8086:3b4c] type 01 class 0x060400
[ 0.458911] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[ 0.458943] pci 0000:00:1d.0: [8086:3b34] type 00 class 0x0c0320
[ 0.458965] pci 0000:00:1d.0: reg 10: [mem 0xf1005c00-0xf1005fff]
[ 0.459066] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.459092] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
[ 0.459161] pci 0000:00:1f.0: [8086:3b03] type 00 class 0x060100
[ 0.459292] pci 0000:00:1f.2: [8086:3b2f] type 00 class 0x010601
[ 0.459313] pci 0000:00:1f.2: reg 10: [io 0x1830-0x1837]
[ 0.459322] pci 0000:00:1f.2: reg 14: [io 0x1824-0x1827]
[ 0.459331] pci 0000:00:1f.2: reg 18: [io 0x1828-0x182f]
[ 0.459340] pci 0000:00:1f.2: reg 1c: [io 0x1820-0x1823]
[ 0.459350] pci 0000:00:1f.2: reg 20: [io 0x1800-0x181f]
[ 0.459359] pci 0000:00:1f.2: reg 24: [mem 0xf1005000-0xf10057ff]
[ 0.459410] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.459430] pci 0000:00:1f.3: [8086:3b30] type 00 class 0x0c0500
[ 0.459446] pci 0000:00:1f.3: reg 10: [mem 0xf1006000-0xf10060ff 64bit]
[ 0.459469] pci 0000:00:1f.3: reg 20: [io 0x1840-0x185f]
[ 0.459533] pci_bus 0000:02: busn_res: [bus 02] is inserted under [bus 00-fe]
[ 0.459547] pci 0000:02:00.0: [1002:9488] type 00 class 0x030000
[ 0.459559] pci 0000:02:00.0: reg 10: [mem 0xd0000000-0xdfffffff pref]
[ 0.459568] pci 0000:02:00.0: reg 14: [io 0x2000-0x20ff]
[ 0.459577] pci 0000:02:00.0: reg 18: [mem 0xcfef0000-0xcfefffff]
[ 0.459605] pci 0000:02:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[ 0.459642] pci 0000:02:00.0: supports D1 D2
[ 0.459664] pci 0000:02:00.1: [1002:aa38] type 00 class 0x040300
[ 0.459676] pci 0000:02:00.1: reg 10: [mem 0xcfeec000-0xcfeeffff]
[ 0.459749] pci 0000:02:00.1: supports D1 D2
[ 0.469037] pci 0000:00:03.0: PCI bridge to [bus 02]
[ 0.469045] pci 0000:00:03.0: bridge window [io 0x2000-0x2fff]
[ 0.469052] pci 0000:00:03.0: bridge window [mem 0xcfe00000-0xcfefffff]
[ 0.469061] pci 0000:00:03.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.469117] pci_bus 0000:03: busn_res: [bus 03-04] is inserted under [bus 00-fe]
[ 0.469121] pci 0000:00:1c.0: PCI bridge to [bus 03-04]
[ 0.469126] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
[ 0.469130] pci 0000:00:1c.0: bridge window [mem 0xf0800000-0xf08fffff]
[ 0.469137] pci 0000:00:1c.0: bridge window [mem 0xf0000000-0xf01fffff 64bit pref]
[ 0.469179] pci_bus 0000:05: busn_res: [bus 05-06] is inserted under [bus 00-fe]
[ 0.469247] pci 0000:05:00.0: [8086:4235] type 00 class 0x028000
[ 0.469385] pci 0000:05:00.0: reg 10: [mem 0xf0900000-0xf0901fff 64bit]
[ 0.470080] pci 0000:05:00.0: PME# supported from D0 D3hot D3cold
[ 0.470313] pci 0000:00:1c.1: PCI bridge to [bus 05-06]
[ 0.470317] pci 0000:00:1c.1: bridge window [io 0x4000-0x4fff]
[ 0.470322] pci 0000:00:1c.1: bridge window [mem 0xf0900000-0xf09fffff]
[ 0.470329] pci 0000:00:1c.1: bridge window [mem 0xf0200000-0xf03fffff 64bit pref]
[ 0.470371] pci_bus 0000:07: busn_res: [bus 07-08] is inserted under [bus 00-fe]
[ 0.470375] pci 0000:00:1c.3: PCI bridge to [bus 07-08]
[ 0.470380] pci 0000:00:1c.3: bridge window [io 0x5000-0x5fff]
[ 0.470384] pci 0000:00:1c.3: bridge window [mem 0xf0a00000-0xf0afffff]
[ 0.470391] pci 0000:00:1c.3: bridge window [mem 0xf0400000-0xf05fffff 64bit pref]
[ 0.470433] pci_bus 0000:09: busn_res: [bus 09-0a] is inserted under [bus 00-fe]
[ 0.470458] pci 0000:09:00.0: [1180:e822] type 00 class 0x080500
[ 0.470478] pci 0000:09:00.0: reg 10: [mem 0xf0b00000-0xf0b000ff]
[ 0.470612] pci 0000:09:00.0: supports D1 D2
[ 0.470614] pci 0000:09:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.470664] pci 0000:09:00.1: [1180:e230] type 00 class 0x088000
[ 0.470683] pci 0000:09:00.1: reg 10: [mem 0xf0c00800-0xf0c008ff]
[ 0.470817] pci 0000:09:00.1: supports D1 D2
[ 0.470819] pci 0000:09:00.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.470862] pci 0000:09:00.2: [1180:e852] type 00 class 0x088000
[ 0.470882] pci 0000:09:00.2: reg 10: [mem 0xf0c00c00-0xf0c00cff]
[ 0.471016] pci 0000:09:00.2: supports D1 D2
[ 0.471018] pci 0000:09:00.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.471061] pci 0000:09:00.3: [1180:e832] type 00 class 0x0c0010
[ 0.471080] pci 0000:09:00.3: reg 10: [mem 0xf0c00000-0xf0c007ff]
[ 0.471214] pci 0000:09:00.3: supports D1 D2
[ 0.471216] pci 0000:09:00.3: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.479052] pci 0000:00:1c.4: PCI bridge to [bus 09-0a]
[ 0.479060] pci 0000:00:1c.4: bridge window [io 0x6000-0x6fff]
[ 0.479067] pci 0000:00:1c.4: bridge window [mem 0xf0b00000-0xf0cfffff]
[ 0.479077] pci 0000:00:1c.4: bridge window [mem 0xf0600000-0xf07fffff 64bit pref]
[ 0.479131] pci_bus 0000:0b: busn_res: [bus 0b] is inserted under [bus 00-fe]
[ 0.479319] pci 0000:0b:00.0: [14e4:1698] type 00 class 0x020000
[ 0.479351] pci 0000:0b:00.0: reg 10: [mem 0xf0d00000-0xf0d0ffff 64bit]
[ 0.479523] pci 0000:0b:00.0: PME# supported from D3hot D3cold
[ 0.479582] pci 0000:00:1c.5: PCI bridge to [bus 0b]
[ 0.479589] pci 0000:00:1c.5: bridge window [mem 0xf0d00000-0xf0dfffff]
[ 0.479616] pci_bus 0000:0c: busn_res: [bus 0c] is inserted under [bus 00-fe]
[ 0.479664] pci 0000:00:1e.0: PCI bridge to [bus 0c] (subtractive decode)
[ 0.479675] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.479677] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.479680] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.479682] pci 0000:00:1e.0: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
[ 0.479685] pci 0000:00:1e.0: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
[ 0.479687] pci 0000:00:1e.0: bridge window [mem 0x000dc000-0x000dffff] (subtractive decode)
[ 0.479690] pci 0000:00:1e.0: bridge window [mem 0xc8000000-0xdfffffff] (subtractive decode)
[ 0.479692] pci 0000:00:1e.0: bridge window [mem 0xf0000000-0xfebfffff] (subtractive decode)
[ 0.479724] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.479928] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
[ 0.479968] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[ 0.480099] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[ 0.480160] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
[ 0.480223] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
[ 0.480283] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP05._PRT]
[ 0.480343] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP06._PRT]
[ 0.480435] \_SB_.PCI0:_OSC invalid UUID
[ 0.480437] _OSC request data:1 1f 1f
[ 0.480441] pci0000:00: ACPI _OSC support notification failed, disabling PCIe ASPM
[ 0.480443] pci0000:00: Unable to request _OSC control (_OSC support mask: 0x08)
[ 0.487467] ACPI: PCI Root Bridge [CPBG] (domain 0000 [bus ff])
[ 0.487507] PCI host bridge to bus 0000:ff
[ 0.487511] pci_bus 0000:ff: busn_res: [bus ff] is inserted under domain [bus 00-ff]
[ 0.487513] pci_bus 0000:ff: root bus resource [bus ff]
[ 0.487521] pci 0000:ff:00.0: [8086:2c52] type 00 class 0x060000
[ 0.487545] pci 0000:ff:00.1: [8086:2c81] type 00 class 0x060000
[ 0.487572] pci 0000:ff:02.0: [8086:2c90] type 00 class 0x060000
[ 0.487594] pci 0000:ff:02.1: [8086:2c91] type 00 class 0x060000
[ 0.487622] pci 0000:ff:03.0: [8086:2c98] type 00 class 0x060000
[ 0.487644] pci 0000:ff:03.1: [8086:2c99] type 00 class 0x060000
[ 0.487667] pci 0000:ff:03.4: [8086:2c9c] type 00 class 0x060000
[ 0.487691] pci 0000:ff:04.0: [8086:2ca0] type 00 class 0x060000
[ 0.487714] pci 0000:ff:04.1: [8086:2ca1] type 00 class 0x060000
[ 0.487736] pci 0000:ff:04.2: [8086:2ca2] type 00 class 0x060000
[ 0.487758] pci 0000:ff:04.3: [8086:2ca3] type 00 class 0x060000
[ 0.487783] pci 0000:ff:05.0: [8086:2ca8] type 00 class 0x060000
[ 0.487807] pci 0000:ff:05.1: [8086:2ca9] type 00 class 0x060000
[ 0.487829] pci 0000:ff:05.2: [8086:2caa] type 00 class 0x060000
[ 0.487852] pci 0000:ff:05.3: [8086:2cab] type 00 class 0x060000
[ 0.487895] pci0000:ff: ACPI _OSC support notification failed, disabling PCIe ASPM
[ 0.487897] pci0000:ff: Unable to request _OSC control (_OSC support mask: 0x08)
[ 0.488488] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 *5 6 7 10 12 14 15)
[ 0.488544] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[ 0.488601] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[ 0.488655] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[ 0.488711] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[ 0.488765] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[ 0.488819] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 *7 10 12 14 15)
[ 0.488871] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[ 0.488974] vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.488983] vgaarb: loaded
[ 0.488985] vgaarb: bridge control possible 0000:02:00.0
[ 0.489035] PCI: Using ACPI for IRQ routing
[ 0.495825] PCI: pci_cache_line_size set to 64 bytes
[ 0.496142] e820: reserve RAM buffer [mem 0x0009c400-0x0009ffff]
[ 0.496144] e820: reserve RAM buffer [mem 0xc727c000-0xc7ffffff]
[ 0.496149] e820: reserve RAM buffer [mem 0xc73ec000-0xc7ffffff]
[ 0.496152] e820: reserve RAM buffer [mem 0xc746f000-0xc7ffffff]
[ 0.496156] e820: reserve RAM buffer [mem 0xc7718000-0xc7ffffff]
[ 0.496159] e820: reserve RAM buffer [mem 0xc7771000-0xc7ffffff]
[ 0.496161] e820: reserve RAM buffer [mem 0xc77e2000-0xc7ffffff]
[ 0.496163] e820: reserve RAM buffer [mem 0xc7800000-0xc7ffffff]
[ 0.496267] NetLabel: Initializing
[ 0.496269] NetLabel: domain hash size = 128
[ 0.496270] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.496283] NetLabel: unlabeled traffic allowed by default
[ 0.496337] HPET: 8 timers in total, 5 timers will be used for per-cpu timer
[ 0.496344] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 40, 41, 42, 43, 44, 0
[ 0.496351] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.499146] hpet: hpet2 irq 40 for MSI
[ 0.502434] hpet: hpet3 irq 41 for MSI
[ 0.505694] hpet: hpet4 irq 42 for MSI
[ 0.505793] hpet: hpet5 irq 43 for MSI
[ 0.509214] hpet: hpet6 irq 44 for MSI
[ 0.522618] Switching to clocksource hpet
[ 0.529334] pnp: PnP ACPI init
[ 0.529354] ACPI: bus type pnp registered
[ 0.529782] pnp 00:00: [bus 00-fe]
[ 0.529786] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.529789] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.529791] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.529794] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.529796] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
[ 0.529799] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
[ 0.529801] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
[ 0.529803] pnp 00:00: [mem 0x000cc000-0x000cffff window]
[ 0.529806] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
[ 0.529808] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
[ 0.529811] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
[ 0.529813] pnp 00:00: [mem 0x000dc000-0x000dffff window]
[ 0.529815] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
[ 0.529820] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
[ 0.529822] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
[ 0.529825] pnp 00:00: [mem 0x000ec000-0x000effff window]
[ 0.529827] pnp 00:00: [mem 0x000f0000-0x000fffff window]
[ 0.529829] pnp 00:00: [mem 0xc8000000-0xdfffffff window]
[ 0.529832] pnp 00:00: [mem 0xf0000000-0xfebfffff window]
[ 0.529834] pnp 00:00: [mem 0xfed40000-0xfed44fff window]
[ 0.529903] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 0.529952] pnp 00:01: [io 0x0000-0x001f]
[ 0.529954] pnp 00:01: [io 0x0081-0x0091]
[ 0.529957] pnp 00:01: [io 0x0093-0x009f]
[ 0.529959] pnp 00:01: [io 0x00c0-0x00df]
[ 0.529961] pnp 00:01: [dma 4]
[ 0.529991] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.530001] pnp 00:02: [mem 0xff000000-0xffffffff]
[ 0.530030] pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
[ 0.530116] pnp 00:03: [irq 0 disabled]
[ 0.530125] pnp 00:03: [irq 8]
[ 0.530128] pnp 00:03: [mem 0xfed00000-0xfed003ff]
[ 0.530162] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.530174] pnp 00:04: [io 0x00f0]
[ 0.530181] pnp 00:04: [irq 13]
[ 0.530207] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.530221] pnp 00:05: [io 0x002e-0x002f]
[ 0.530223] pnp 00:05: [io 0x004e-0x004f]
[ 0.530225] pnp 00:05: [io 0x0061]
[ 0.530227] pnp 00:05: [io 0x0063]
[ 0.530229] pnp 00:05: [io 0x0065]
[ 0.530231] pnp 00:05: [io 0x0067]
[ 0.530234] pnp 00:05: [io 0x0068]
[ 0.530236] pnp 00:05: [io 0x006c]
[ 0.530238] pnp 00:05: [io 0x0070]
[ 0.530240] pnp 00:05: [io 0x0080]
[ 0.530242] pnp 00:05: [io 0x0092]
[ 0.530244] pnp 00:05: [io 0x00b2-0x00b3]
[ 0.530246] pnp 00:05: [io 0x0680-0x069f]
[ 0.530249] pnp 00:05: [io 0x0500-0x050f]
[ 0.530251] pnp 00:05: [io 0xffff]
[ 0.530253] pnp 00:05: [io 0xffff]
[ 0.530255] pnp 00:05: [io 0x0400-0x047f]
[ 0.530257] pnp 00:05: [io 0x1180-0x11ff]
[ 0.530259] pnp 00:05: [io 0x164e-0x164f]
[ 0.530262] pnp 00:05: [io 0xfe00]
[ 0.530330] system 00:05: [io 0x0680-0x069f] has been reserved
[ 0.530333] system 00:05: [io 0x0500-0x050f] has been reserved
[ 0.530336] system 00:05: [io 0xffff] has been reserved
[ 0.530339] system 00:05: [io 0xffff] has been reserved
[ 0.530342] system 00:05: [io 0x0400-0x047f] has been reserved
[ 0.530345] system 00:05: [io 0x1180-0x11ff] has been reserved
[ 0.530347] system 00:05: [io 0x164e-0x164f] has been reserved
[ 0.530352] system 00:05: [io 0xfe00] has been reserved
[ 0.530356] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.530374] pnp 00:06: [io 0x0300-0x0307]
[ 0.530381] pnp 00:06: [irq 10]
[ 0.530410] pnp 00:06: Plug and Play ACPI device, IDs ITE8708 (active)
[ 0.530445] pnp 00:07: [io 0x0070-0x0077]
[ 0.530476] pnp 00:07: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.530488] pnp 00:08: [io 0x0060]
[ 0.530492] pnp 00:08: [io 0x0064]
[ 0.530499] pnp 00:08: [irq 1]
[ 0.530526] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.530539] pnp 00:09: [irq 12]
[ 0.530569] pnp 00:09: Plug and Play ACPI device, IDs PNP0f13 (active)
[ 0.530934] pnp 00:0a: [mem 0xfed1c000-0xfed1ffff]
[ 0.530937] pnp 00:0a: [mem 0x00000000-0xffffffffffffffff disabled]
[ 0.530940] pnp 00:0a: [mem 0xfed1b000-0xfed1bfff]
[ 0.530942] pnp 00:0a: [mem 0x00000000-0xffffffffffffffff disabled]
[ 0.530944] pnp 00:0a: [mem 0xe0000000-0xefffffff]
[ 0.530947] pnp 00:0a: [mem 0xf1004000-0xf1004fff]
[ 0.530949] pnp 00:0a: [mem 0xc8000000-0xc8000fff]
[ 0.530951] pnp 00:0a: [mem 0xfed20000-0xfed3ffff]
[ 0.530954] pnp 00:0a: [mem 0xfed90000-0xfed8ffff disabled]
[ 0.530956] pnp 00:0a: [mem 0xfed40000-0xfed44fff]
[ 0.530958] pnp 00:0a: [mem 0xfed45000-0xfed8ffff]
[ 0.530960] pnp 00:0a: [mem 0xff000000-0xffffffff]
[ 0.530963] pnp 00:0a: [mem 0xfee00000-0xfeefffff]
[ 0.531049] system 00:0a: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.531052] system 00:0a: [mem 0xfed1b000-0xfed1bfff] has been reserved
[ 0.531055] system 00:0a: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.531058] system 00:0a: [mem 0xf1004000-0xf1004fff] has been reserved
[ 0.531061] system 00:0a: [mem 0xc8000000-0xc8000fff] has been reserved
[ 0.531064] system 00:0a: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.531067] system 00:0a: [mem 0xfed40000-0xfed44fff] has been reserved
[ 0.531070] system 00:0a: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.531072] system 00:0a: [mem 0xff000000-0xffffffff] has been reserved
[ 0.531075] system 00:0a: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.531080] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.532133] pnp 00:0b: [bus ff]
[ 0.532197] pnp 00:0b: Plug and Play ACPI device, IDs PNP0a03 (active)
[ 0.532211] pnp: PnP ACPI: found 12 devices
[ 0.532212] ACPI: ACPI bus type pnp unregistered
[ 0.539150] pci 0000:00:1c.5: bridge window [io 0x1000-0x0fff] to [bus 0b] add_size 1000
[ 0.539155] pci 0000:00:1c.5: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 0b] add_size 200000
[ 0.539169] pci 0000:00:1c.5: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 0.539172] pci 0000:00:1c.5: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
[ 0.539178] pci 0000:00:1c.5: BAR 15: assigned [mem 0xc8100000-0xc82fffff 64bit pref]
[ 0.539182] pci 0000:00:1c.5: BAR 13: assigned [io 0x7000-0x7fff]
[ 0.539186] pci 0000:02:00.0: BAR 6: assigned [mem 0xcfe00000-0xcfe1ffff pref]
[ 0.539190] pci 0000:00:03.0: PCI bridge to [bus 02]
[ 0.539193] pci 0000:00:03.0: bridge window [io 0x2000-0x2fff]
[ 0.539198] pci 0000:00:03.0: bridge window [mem 0xcfe00000-0xcfefffff]
[ 0.539202] pci 0000:00:03.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.539207] pci 0000:00:1c.0: PCI bridge to [bus 03-04]
[ 0.539211] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
[ 0.539217] pci 0000:00:1c.0: bridge window [mem 0xf0800000-0xf08fffff]
[ 0.539221] pci 0000:00:1c.0: bridge window [mem 0xf0000000-0xf01fffff 64bit pref]
[ 0.539228] pci 0000:00:1c.1: PCI bridge to [bus 05-06]
[ 0.539232] pci 0000:00:1c.1: bridge window [io 0x4000-0x4fff]
[ 0.539237] pci 0000:00:1c.1: bridge window [mem 0xf0900000-0xf09fffff]
[ 0.539241] pci 0000:00:1c.1: bridge window [mem 0xf0200000-0xf03fffff 64bit pref]
[ 0.539248] pci 0000:00:1c.3: PCI bridge to [bus 07-08]
[ 0.539252] pci 0000:00:1c.3: bridge window [io 0x5000-0x5fff]
[ 0.539257] pci 0000:00:1c.3: bridge window [mem 0xf0a00000-0xf0afffff]
[ 0.539262] pci 0000:00:1c.3: bridge window [mem 0xf0400000-0xf05fffff 64bit pref]
[ 0.539269] pci 0000:00:1c.4: PCI bridge to [bus 09-0a]
[ 0.539273] pci 0000:00:1c.4: bridge window [io 0x6000-0x6fff]
[ 0.539278] pci 0000:00:1c.4: bridge window [mem 0xf0b00000-0xf0cfffff]
[ 0.539283] pci 0000:00:1c.4: bridge window [mem 0xf0600000-0xf07fffff 64bit pref]
[ 0.539290] pci 0000:00:1c.5: PCI bridge to [bus 0b]
[ 0.539293] pci 0000:00:1c.5: bridge window [io 0x7000-0x7fff]
[ 0.539299] pci 0000:00:1c.5: bridge window [mem 0xf0d00000-0xf0dfffff]
[ 0.539304] pci 0000:00:1c.5: bridge window [mem 0xc8100000-0xc82fffff 64bit pref]
[ 0.539310] pci 0000:00:1e.0: PCI bridge to [bus 0c]
[ 0.539366] pci 0000:00:1e.0: setting latency timer to 64
[ 0.539371] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.539373] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.539376] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.539378] pci_bus 0000:00: resource 7 [mem 0x000d4000-0x000d7fff]
[ 0.539381] pci_bus 0000:00: resource 8 [mem 0x000d8000-0x000dbfff]
[ 0.539383] pci_bus 0000:00: resource 9 [mem 0x000dc000-0x000dffff]
[ 0.539385] pci_bus 0000:00: resource 10 [mem 0xc8000000-0xdfffffff]
[ 0.539398] pci_bus 0000:00: resource 11 [mem 0xf0000000-0xfebfffff]
[ 0.539401] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
[ 0.539403] pci_bus 0000:02: resource 1 [mem 0xcfe00000-0xcfefffff]
[ 0.539406] pci_bus 0000:02: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.539408] pci_bus 0000:03: resource 0 [io 0x3000-0x3fff]
[ 0.539411] pci_bus 0000:03: resource 1 [mem 0xf0800000-0xf08fffff]
[ 0.539413] pci_bus 0000:03: resource 2 [mem 0xf0000000-0xf01fffff 64bit pref]
[ 0.539416] pci_bus 0000:05: resource 0 [io 0x4000-0x4fff]
[ 0.539418] pci_bus 0000:05: resource 1 [mem 0xf0900000-0xf09fffff]
[ 0.539420] pci_bus 0000:05: resource 2 [mem 0xf0200000-0xf03fffff 64bit pref]
[ 0.539423] pci_bus 0000:07: resource 0 [io 0x5000-0x5fff]
[ 0.539425] pci_bus 0000:07: resource 1 [mem 0xf0a00000-0xf0afffff]
[ 0.539428] pci_bus 0000:07: resource 2 [mem 0xf0400000-0xf05fffff 64bit pref]
[ 0.539430] pci_bus 0000:09: resource 0 [io 0x6000-0x6fff]
[ 0.539433] pci_bus 0000:09: resource 1 [mem 0xf0b00000-0xf0cfffff]
[ 0.539435] pci_bus 0000:09: resource 2 [mem 0xf0600000-0xf07fffff 64bit pref]
[ 0.539438] pci_bus 0000:0b: resource 0 [io 0x7000-0x7fff]
[ 0.539440] pci_bus 0000:0b: resource 1 [mem 0xf0d00000-0xf0dfffff]
[ 0.539443] pci_bus 0000:0b: resource 2 [mem 0xc8100000-0xc82fffff 64bit pref]
[ 0.539445] pci_bus 0000:0c: resource 4 [io 0x0000-0x0cf7]
[ 0.539448] pci_bus 0000:0c: resource 5 [io 0x0d00-0xffff]
[ 0.539450] pci_bus 0000:0c: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.539452] pci_bus 0000:0c: resource 7 [mem 0x000d4000-0x000d7fff]
[ 0.539455] pci_bus 0000:0c: resource 8 [mem 0x000d8000-0x000dbfff]
[ 0.539457] pci_bus 0000:0c: resource 9 [mem 0x000dc000-0x000dffff]
[ 0.539460] pci_bus 0000:0c: resource 10 [mem 0xc8000000-0xdfffffff]
[ 0.539462] pci_bus 0000:0c: resource 11 [mem 0xf0000000-0xfebfffff]
[ 0.539501] NET: Registered protocol family 2
[ 0.540223] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 0.543745] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.544173] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.544194] TCP: reno registered
[ 0.544208] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.544300] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.544454] NET: Registered protocol family 1
[ 0.544593] pci 0000:02:00.0: Boot video device
[ 0.544817] PCI: CLS 64 bytes, default 64
[ 0.544861] Unpacking initramfs...
[ 0.665886] Freeing initrd memory: 4640k freed
[ 0.666611] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.666615] software IO TLB [mem 0xc327c000-0xc727bfff] (64MB) mapped at [ffff8800c327c000-ffff8800c727bfff]
[ 0.666654] Simple Boot Flag at 0x36 set to 0x80
[ 0.667182] audit: initializing netlink socket (disabled)
[ 0.667193] type=2000 audit(1352749565.703:1): initialized
[ 0.683027] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.685360] VFS: Disk quotas dquot_6.5.2
[ 0.685417] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.685575] msgmni has been set to 15952
[ 0.685799] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.685830] io scheduler noop registered
[ 0.685832] io scheduler deadline registered
[ 0.685897] io scheduler cfq registered (default)
[ 0.686337] vesafb: mode is 1280x1024x32, linelength=5120, pages=0
[ 0.686339] vesafb: scrolling: redraw
[ 0.686342] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
[ 0.687265] vesafb: framebuffer at 0xd0000000, mapped to 0xffffc90011600000, using 5120k, total 5120k
[ 0.886729] Console: switching to colour frame buffer device 160x64
[ 1.086123] fb0: VESA VGA frame buffer device
[ 1.086134] intel_idle: MWAIT substates: 0x1120
[ 1.086145] intel_idle: v0.4 model 0x1E
[ 1.086146] intel_idle: lapic_timer_reliable_states 0x2
[ 1.086221] GHES: HEST is not enabled!
[ 1.086283] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 1.086787] Linux agpgart interface v0.103
[ 1.086895] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 1.097204] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.097237] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.097348] mousedev: PS/2 mouse device common for all mice
[ 1.097573] rtc_cmos 00:07: RTC can wake from S4
[ 1.097893] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
[ 1.097920] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 1.098264] cpuidle: using governor ladder
[ 1.098473] cpuidle: using governor menu
[ 1.098603] drop_monitor: Initializing network drop monitor service
[ 1.098697] TCP: cubic registered
[ 1.098819] NET: Registered protocol family 10
[ 1.099011] NET: Registered protocol family 17
[ 1.099028] Key type dns_resolver registered
[ 1.099438] PM: Hibernation image not present or could not be loaded.
[ 1.099447] registered taskstats version 1
[ 1.101811] rtc_cmos 00:07: setting system clock to 2012-11-12 19:46:05 UTC (1352749565)
[ 1.103851] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 1.106355] Freeing unused kernel memory: 768k freed
[ 1.106522] Write protecting the kernel read-only data: 8192k
[ 1.116385] Freeing unused kernel memory: 1408k freed
[ 1.117994] Freeing unused kernel memory: 568k freed
[ 1.134497] systemd-udevd[78]: starting version 195
[ 1.180869] ACPI: bus type usb registered
[ 1.180984] usbcore: registered new interface driver usbfs
[ 1.181051] usbcore: registered new interface driver hub
[ 1.181311] usbcore: registered new device driver usb
[ 1.182950] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.183127] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[ 1.183132] ehci_hcd 0000:00:1a.0: EHCI Host Controller
[ 1.183234] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 1.187253] ehci_hcd 0000:00:1a.0: debug port 2
[ 1.187271] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
[ 1.187303] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xf1005800
[ 1.187791] SCSI subsystem initialized
[ 1.189604] ACPI: bus type scsi registered
[ 1.189681] libata version 3.00 loaded.
[ 1.195488] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 1.195917] hub 1-0:1.0: USB hub found
[ 1.195922] hub 1-0:1.0: 3 ports detected
[ 1.196087] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[ 1.196092] ehci_hcd 0000:00:1d.0: EHCI Host Controller
[ 1.196163] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 1.200176] ehci_hcd 0000:00:1d.0: debug port 2
[ 1.200188] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
[ 1.200205] ehci_hcd 0000:00:1d.0: irq 23, io mem 0xf1005c00
[ 1.208814] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 1.209225] hub 2-0:1.0: USB hub found
[ 1.209230] hub 2-0:1.0: 3 ports detected
[ 1.209367] ahci 0000:00:1f.2: version 3.0
[ 1.209430] ahci 0000:00:1f.2: irq 45 for MSI/MSI-X
[ 1.209548] ahci: SSS flag set, parallel bus scan disabled
[ 1.209587] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 3 Gbps 0x23 impl SATA mode
[ 1.209592] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ems sxs apst
[ 1.209597] ahci 0000:00:1f.2: setting latency timer to 64
[ 1.223416] scsi0 : ahci
[ 1.223797] scsi1 : ahci
[ 1.224147] scsi2 : ahci
[ 1.224500] scsi3 : ahci
[ 1.224856] scsi4 : ahci
[ 1.225221] scsi5 : ahci
[ 1.225356] ata1: SATA max UDMA/133 abar m2048@0xf1005000 port 0xf1005100 irq 45
[ 1.225362] ata2: SATA max UDMA/133 abar m2048@0xf1005000 port 0xf1005180 irq 45
[ 1.225365] ata3: DUMMY
[ 1.225367] ata4: DUMMY
[ 1.225369] ata5: DUMMY
[ 1.225373] ata6: SATA max UDMA/133 abar m2048@0xf1005000 port 0xf1005380 irq 45
[ 1.501934] usb 1-1: new high-speed USB device number 2 using ehci_hcd
[ 1.545247] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.547533] ata1.00: ATA-8: WDC WD6400BEVT-75A0RT0, 01.01A01, max UDMA/133
[ 1.547540] ata1.00: 1250263728 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.549967] ata1.00: configured for UDMA/133
[ 1.550374] scsi 0:0:0:0: Direct-Access ATA WDC WD6400BEVT-7 01.0 PQ: 0 ANSI: 5
[ 1.626090] hub 1-1:1.0: USB hub found
[ 1.626247] hub 1-1:1.0: 6 ports detected
[ 1.668452] tsc: Refined TSC clocksource calibration: 1595.999 MHz
[ 1.668460] Switching to clocksource tsc
[ 1.731725] usb 2-1: new high-speed USB device number 2 using ehci_hcd
[ 1.856178] hub 2-1:1.0: USB hub found
[ 1.856346] hub 2-1:1.0: 8 ports detected
[ 1.868319] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.880979] ata2.00: ATAPI: TSSTcorp DVD+/-RW TS-T633C, D800, max UDMA/100
[ 1.880987] ata2.00: applying bridge limits
[ 1.894279] ata2.00: configured for UDMA/100
[ 1.895297] scsi 1:0:0:0: CD-ROM TSSTcorp DVD+-RW TS-T633C D800 PQ: 0 ANSI: 5
[ 1.924926] usb 1-1.4: new high-speed USB device number 3 using ehci_hcd
[ 2.188109] usb 2-1.1: new low-speed USB device number 3 using ehci_hcd
[ 2.214657] ata6: SATA link down (SStatus 0 SControl 300)
[ 2.220297] sd 0:0:0:0: [sda] 1250263728 512-byte logical blocks: (640 GB/596 GiB)
[ 2.220394] sd 0:0:0:0: [sda] Write Protect is off
[ 2.220398] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.220436] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.264902] sda: sda1 sda2
[ 2.266126] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.286592] usbcore: registered new interface driver usbhid
[ 2.286606] usbhid: USB HID core driver
[ 2.287736] input: Logitech USB Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.0/input/input1
[ 2.288087] hid-generic 0003:046D:C00B.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB Mouse] on usb-0000:00:1d.0-1.1/input0
[ 2.344526] usb 2-1.2: new high-speed USB device number 4 using ehci_hcd
[ 2.415244] device-mapper: uevent: version 1.0.3
[ 2.415448] device-mapper: ioctl: 4.23.0-ioctl (2012-07-25) initialised: [email protected]
[ 2.430414] hub 2-1.2:1.0: USB hub found
[ 2.430750] hub 2-1.2:1.0: 4 ports detected
[ 2.497819] usb 2-1.6: new full-speed USB device number 5 using ehci_hcd
[ 2.583779] hub 2-1.6:1.0: USB hub found
[ 2.583940] hub 2-1.6:1.0: 3 ports detected
[ 2.697722] usb 2-1.2.1: new high-speed USB device number 6 using ehci_hcd
[ 2.850856] usb 2-1.6.1: new full-speed USB device number 7 using ehci_hcd
[ 2.939323] input: HID 413c:8157 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6.1/2-1.6.1:1.0/input/input2
[ 2.939498] hid-generic 0003:413C:8157.0002: input,hidraw1: USB HID v1.11 Keyboard [HID 413c:8157] on usb-0000:00:1d.0-1.6.1/input0
[ 3.004105] usb 2-1.6.2: new full-speed USB device number 8 using ehci_hcd
[ 3.094077] input: HID 413c:8158 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6.2/2-1.6.2:1.0/input/input3
[ 3.094424] hid-generic 0003:413C:8158.0003: input,hidraw2: USB HID v1.11 Mouse [HID 413c:8158] on usb-0000:00:1d.0-1.6.2/input0
[ 824.543880] Btrfs loaded
[ 824.582726] device fsid 02cda685-4334-4137-a111-ffc149f72b91 devid 1 transid 219619 /dev/dm-4
[ 824.589373] device fsid f90574c8-73b1-4d21-b0f9-c8383e90f702 devid 1 transid 19638 /dev/dm-1
[ 825.172465] device fsid f90574c8-73b1-4d21-b0f9-c8383e90f702 devid 1 transid 19638 /dev/mapper/cryptpool-cryptroot
[ 825.228574] btrfs: mismatching generation and generation_v2 found in root item. This root was probably mounted with an older kernel. Resetting all new fields.
[ 825.236250] btrfs: mismatching generation and generation_v2 found in root item. This root was probably mounted with an older kernel. Resetting all new fields.
[ 825.497003] btrfs: mismatching generation and generation_v2 found in root item. This root was probably mounted with an older kernel. Resetting all new fields.
[ 826.881639] systemd[1]: systemd 195 running in system mode. (+PAM -LIBWRAP -AUDIT -SELINUX -IMA -SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ; arch)
[ 826.913723] systemd[1]: Set hostname to <clawfinger>.
[ 829.535709] systemd[1]: Cannot add dependency job for unit lvm.service, ignoring: Unit lvm.service failed to load: No such file or directory. See system logs and 'systemctl status lvm.service' for details.
[ 829.535737] systemd[1]: Cannot add dependency job for unit cpufreq.service, ignoring: Unit cpufreq.service failed to load: No such file or directory. See system logs and 'systemctl status cpufreq.service' for details.
[ 829.535752] systemd[1]: Cannot add dependency job for unit zeitgeist-daemon.service, ignoring: Unit zeitgeist-daemon.service failed to load: No such file or directory. See system logs and 'systemctl status zeitgeist-daemon.service' for details.
[ 829.535786] systemd[1]: Cannot add dependency job for unit laptop-mode-tools.service, ignoring: Unit laptop-mode-tools.service failed to load: No such file or directory. See system logs and 'systemctl status laptop-mode-tools.service' for details.
[ 829.535834] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory. See system logs and 'systemctl status display-manager.service' for details.
[ 829.535861] systemd[1]: Cannot add dependency job for unit console-kit-daemon.service, ignoring: Unit console-kit-daemon.service failed to load: No such file or directory. See system logs and 'systemctl status console-kit-daemon.service' for details.
[ 829.536380] systemd[1]: Starting Replay Read-Ahead Data...
[ 829.554901] systemd[1]: Starting Collect Read-Ahead Data...
[ 829.571226] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[ 829.571303] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 829.571319] systemd[1]: Starting Login Prompts.
[ 829.571328] systemd[1]: Reached target Login Prompts.
[ 829.571337] systemd[1]: Starting Remote File Systems.
[ 829.571345] systemd[1]: Reached target Remote File Systems.
[ 829.571354] systemd[1]: Expecting device sys-subsystem-net-devices-eth0.device...
[ 829.571362] systemd[1]: Starting Syslog Socket.
[ 829.571364] systemd[1]: Socket service syslog.service not loaded, refusing.
[ 829.572842] systemd[1]: Failed to listen on Syslog Socket.
[ 829.574007] systemd[1]: Starting Arch Daemons.
[ 829.574014] systemd[1]: Reached target Arch Daemons.
[ 829.574023] systemd[1]: Starting LVM2 metadata daemon socket.
[ 829.574048] systemd[1]: Listening on LVM2 metadata daemon socket.
[ 829.574055] systemd[1]: Starting Device-mapper event daemon FIFOs.
[ 829.574075] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[ 829.574081] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[ 829.574098] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 829.574106] systemd[1]: Starting Delayed Shutdown Socket.
[ 829.574129] systemd[1]: Listening on Delayed Shutdown Socket.
[ 829.574218] systemd[1]: Starting udev Kernel Socket.
[ 829.574239] systemd[1]: Listening on udev Kernel Socket.
[ 829.574284] systemd[1]: Starting udev Control Socket.
[ 829.574307] systemd[1]: Listening on udev Control Socket.
[ 829.574332] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
[ 829.574407] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 829.574419] systemd[1]: Starting Encrypted Volumes.
[ 829.574426] systemd[1]: Reached target Encrypted Volumes.
[ 829.574436] systemd[1]: Expecting device dev-disk-by\x2duuid-bb356f76\x2dd262\x2d43ca\x2da705\x2da2eab4b6d6ba.device...
[ 829.574445] systemd[1]: Expecting device dev-disk-by\x2duuid-2796b7f1\x2d10c6\x2d481b\x2d91cb\x2d07cb7110031c.device...
[ 829.574455] systemd[1]: Expecting device dev-disk-by\x2duuid-d169a015\x2d6ef6\x2d47f5\x2da6b2\x2d3db25ecce4a2.device...
[ 829.574467] systemd[1]: Starting Journal Socket.
[ 829.574507] systemd[1]: Listening on Journal Socket.
[ 829.574529] systemd[1]: Mounting Huge Pages File System...
[ 829.577956] systemd[1]: Mounting POSIX Message Queue File System...
[ 829.591510] systemd[1]: Starting udev Coldplug all Devices...
[ 829.594776] systemd[1]: Mounting Debug File System...
[ 829.611201] systemd[1]: Starting udev Kernel Device Manager...
[ 829.614769] systemd[1]: Starting Journal Service...
[ 829.647758] systemd[1]: Started Journal Service.
[ 829.647819] systemd[1]: Starting Syslog.
[ 829.647843] systemd[1]: Reached target Syslog.
[ 829.647879] systemd[1]: Starting home.automount.
[ 829.901808] systemd[1]: Set up automount home.automount.
[ 830.553864] systemd-udevd[249]: starting version 195
[ 831.070954] ACPI: Requesting acpi_cpufreq
[ 831.456015] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input4
[ 831.456019] ACPI: Power Button [PWRB]
[ 831.456058] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input5
[ 831.456060] ACPI: Sleep Button [SLPB]
[ 831.456097] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input6
[ 831.457156] ACPI: Lid Switch [LID0]
[ 831.457203] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input7
[ 831.457206] ACPI: Power Button [PWRF]
[ 831.457547] AMD IOMMUv2 driver by Joerg Roedel <[email protected]>
[ 831.457548] AMD IOMMUv2 functionality not available on this system
[ 831.615332] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[ 831.615336] Disabling lock debugging due to kernel taint
[ 831.619625] <6>[fglrx] Maximum main memory to use for locked dma buffers: 7745 MBytes.
[ 831.619972] <6>[fglrx] vendor: 1002 device: 9488 count: 1
[ 831.620506] <6>[fglrx] ioport: bar 1, base 0x2000, size: 0x100
[ 831.620722] <6>[fglrx] Kernel PAT support is enabled
[ 831.620735] <6>[fglrx] module loaded - fglrx 8.97.2 [Jul 4 2012] with 1 minors
[ 831.621578] ACPI: Fan [FAN0] (off)
[ 831.621623] ACPI: Fan [FAN1] (off)
[ 831.631874] vboxdrv: Found 8 processor cores.
[ 831.633478] vboxdrv: fAsync=0 offMin=0x19b offMax=0x1b771
[ 831.633549] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[ 831.633550] vboxdrv: Successfully loaded version 4.2.4_OSE (interface 0x001a0004).
[ 832.286066] ACPI: AC Adapter [ADP1] (on-line)
[ 832.312526] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[ 832.315135] acpi device:03: registered as cooling_device10
[ 832.315214] ACPI: Video Device [M86] (multi-head: yes rom: no post: no)
[ 832.315347] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/LNXVIDEO:00/input/input8
[ 832.409308] thermal LNXTHERM:00: registered as thermal_zone0
[ 832.409312] ACPI: Thermal Zone [TZ00] (27 C)
[ 832.421895] ACPI: Battery Slot [BAT0] (battery present)
[ 832.422793] thermal LNXTHERM:01: registered as thermal_zone1
[ 832.422797] ACPI: Thermal Zone [TZ01] (69 C)
[ 832.590092] microcode: CPU0 sig=0x106e5, pf=0x10, revision=0x3
[ 832.970363] input: PC Speaker as /devices/platform/pcspkr/input/input9
[ 833.240290] microcode: CPU1 sig=0x106e5, pf=0x10, revision=0x3
[ 833.240762] microcode: CPU2 sig=0x106e5, pf=0x10, revision=0x3
[ 833.241329] microcode: CPU3 sig=0x106e5, pf=0x10, revision=0x3
[ 833.241760] microcode: CPU4 sig=0x106e5, pf=0x10, revision=0x3
[ 833.242173] microcode: CPU5 sig=0x106e5, pf=0x10, revision=0x3
[ 833.242608] microcode: CPU6 sig=0x106e5, pf=0x10, revision=0x3
[ 833.243025] microcode: CPU7 sig=0x106e5, pf=0x10, revision=0x3
[ 833.243492] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
[ 833.265118] wmi: Mapper loaded
[ 833.267255] sdhci: Secure Digital Host Controller Interface driver
[ 833.267258] sdhci: Copyright(c) Pierre Ossman
[ 833.268312] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PMIO 1 (20120711/utaddress-251)
[ 833.268319] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 833.268323] ACPI Warning: 0x0000000000001180-0x00000000000011ff SystemIO conflicts with Region \GPIO 1 (20120711/utaddress-251)
[ 833.268327] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 833.268329] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 833.512963] sdhci-pci 0000:09:00.0: SDHCI controller found [1180:e822] (rev 1)
[ 833.513049] sdhci-pci 0000:09:00.0: Will use DMA mode even though HW doesn't fully claim to support it.
[ 833.513095] Registered led device: mmc0::
[ 833.537204] mmc0: SDHCI controller on PCI [0000:09:00.0] using DMA
[ 833.570607] input: Dell WMI hotkeys as /devices/virtual/input/input10
[ 833.847354] EDAC MC: Ver: 3.0.0
[ 833.930269] firewire_ohci 0000:09:00.3: added OHCI v1.10 device as card 0, 4 IR + 4 IT contexts, quirks 0x11
[ 834.096451] ite_cir: Auto-detected model: ITE8708 CIR transceiver
[ 834.096454] ite_cir: Using model: ITE8708 CIR transceiver
[ 834.096455] ite_cir: TX-capable: 1
[ 834.096456] ite_cir: Sample period (ns): 8680
[ 834.096457] ite_cir: TX carrier frequency (Hz): 38000
[ 834.096458] ite_cir: TX duty cycle (%): 33
[ 834.096459] ite_cir: RX low carrier frequency (Hz): 0
[ 834.096460] ite_cir: RX high carrier frequency (Hz): 0
[ 834.275945] iTCO_vendor_support: vendor-support=0
[ 834.294684] cfg80211: Calling CRDA to update world regulatory domain
[ 834.301218] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[ 834.430008] firewire_core 0000:09:00.3: created device fw0: GUID 324fc0001978e281, S400
[ 834.433957] ACPI Warning: 0x0000000000001840-0x000000000000185f SystemIO conflicts with Region \_SB_.PCI0.SBUS.SMBI 1 (20120711/utaddress-251)
[ 834.433962] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 834.446316] EDAC i7core: Device not found: dev 00.0 PCI ID 8086:2c50
[ 834.977790] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 834.977796] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 834.978266] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 835.102238] snd_hda_intel 0000:00:1b.0: irq 46 for MSI/MSI-X
[ 835.137263] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input11
[ 835.147237] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 835.147687] hda-intel: 0000:02:00.1: Handle VGA-switcheroo audio client
[ 835.147810] snd_hda_intel 0000:02:00.1: irq 47 for MSI/MSI-X
[ 835.152252] Registered IR keymap rc-rc6-mce
[ 835.152388] input: ITE8708 CIR transceiver as /devices/virtual/rc/rc0/input13
[ 835.152451] rc0: ITE8708 CIR transceiver as /devices/virtual/rc/rc0
[ 835.152504] ite_cir: driver has been successfully lMy disk seems also fine
=== START OF INFORMATION SECTION ===
Model Family: Western Digital Scorpio Blue Serial ATA
Device Model: WDC WD6400BEVT-75A0RT0
Serial Number: WD-WX91C8077575
LU WWN Device Id: 5 0014ee 600865d25
Firmware Version: 01.01A01
User Capacity: 640,135,028,736 bytes [640 GB]
Sector Size: 512 bytes logical/physical
Rotation Rate: 5400 rpm
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA8-ACS (minor revision not indicated)
SATA Version is: SATA 2.6, 3.0 Gb/s
Local Time is: Thu Dec 20 21:36:56 2012 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 248) Self-test routine in progress...
80% of test remaining.
Total time to complete Offline
data collection: (16380) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 190) minutes.
Conveyance self-test routine
recommended polling time: ( 5) minutes.
SCT capabilities: (0x7037) SCT Status supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 0
3 Spin_Up_Time 0x0027 184 181 021 Pre-fail Always - 1775
4 Start_Stop_Count 0x0032 079 079 000 Old_age Always - 21418
5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0
7 Seek_Error_Rate 0x002e 200 200 000 Old_age Always - 0
9 Power_On_Hours 0x0032 095 095 000 Old_age Always - 4329
10 Spin_Retry_Count 0x0032 100 100 000 Old_age Always - 0
11 Calibration_Retry_Count 0x0032 100 100 000 Old_age Always - 0
12 Power_Cycle_Count 0x0032 099 099 000 Old_age Always - 1828
191 G-Sense_Error_Rate 0x0032 001 001 000 Old_age Always - 2336
192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 512
193 Load_Cycle_Count 0x0032 161 161 000 Old_age Always - 119448
194 Temperature_Celsius 0x0022 106 089 000 Old_age Always - 41
196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0
197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0030 100 253 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0
200 Multi_Zone_Error_Rate 0x0008 200 200 000 Old_age Offline - 1
240 Head_Flying_Hours 0x0032 095 095 000 Old_age Always - 4000
241 Total_LBAs_Written 0x0032 200 200 000 Old_age Always - 13521667898
242 Total_LBAs_Read 0x0032 200 200 000 Old_age Always - 14814445183
254 Free_Fall_Sensor 0x0032 200 200 000 Old_age Always - 0
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Interrupted (host reset) 90% 4329 -
# 2 Extended offline Completed without error 00% 4329 -
# 3 Short offline Completed without error 00% 0 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay. -
I'm one in a list of many on these pages who appear to be having the same problem. I have tried all the fixes suggested vy Apple without success and I'm about to return the useless piece of crap to Apple in the hope that a new one will be more useful than the £300 doorstop I have at present.
For anyone that has sent their iPod back to Apple and had a replacement sent, has this solved the problem? If not, has anyone been successful in having their money refunded?
I'm concerned that returning the iPod will serve only to replace one with 8000 songs on it which is no longer recognised by my PC, with one with no songs on it which is not recognised by my PC. I've already spent 30 hours or so trying every conceivable fix with the gadget, and I'm concerned that there appears to be a very real - but unidentifiable - flaw with the product which seems to sporadically appear and make it impossible to update.
Anyone had any good news when dealing with Apple on this front?Well, I now am back to 9000 songs and a couple of movies! How did I manage this given the recognition problems I've been having with iPod and Windows?
Easy. Explained the problems to those nice people at PC World in Edinburgh and they gave me a Creative Zen Vision M as a replacement plus the £60 so of difference in price.
So, back up to speed with my portable music and movies, and an FM Radio on it too. I seriously thought I had thrown my money down the toilet with the iPod and I'm delighted that PC World showed the sort of customer service they are not generally renowned for.
Interestingly, they were saying that they have had a lot of problems with the iPod - particularly in recent weeks. I hope Creative don't go the same way! -
Kernel task over 100%. High CPU Load. High Temp. Problem Solved.
Hi,
I thought i would make a post as i had been having trouble with my 13 inch mid 2009 MBP for sometime (6 months), with runaway kernel tasks causing high CPU loads. I had searched through forums and discussions for a long time trying to find the problem and isolate it. Initially i discovered some problems with finder preferances that were chewing up CPU which i solved by deleting the prefereance file, allowing the system to recreate a non corrupted version. This helped but still i had problems. I tried maintainance suites like onyx, reseting PRAM, booting into safe mode, hardware checks and diagnostics, and more little tricks than i can remember. Nothing i tried really seemed to make a differance. Through reading on this forum and others i found out the kernel tasks can be a direct result of hi CPU core temps as the system runs a lot of small kernel tasks to try and take some of the CPU load away from processor intensive processes that may be contributing to hi CPU load. The thing which solved my problem in the end was opening up my MBP, being careful not to touch the logic board and literally puting my vacuum cleaner over the fan, sucking dust and dirt and dust out of my latop. This computer has been through the dirt with me, literally its been dragged through rural south east asia for a year and accompianied me to warhouse parties to perform and run lighting and visuals. Its little wonder the fan was obviously clogged. I know people tend to be holier than though with their mac products and treat them with the upmost respect, but my love for the MBP has come from how sturdy and reliable it has been under less than desirable conditions.
Now im not telling people this is what they should do, i had just noticed alot of people with this problem in my attempts to solve mine, and in the end this is what helped. My MBP now runs at a temperature where i can touch the metal near the CPU without being worried about a 3rd degree burn and the CPU load is acceptable with no run away kernel tasks. Like i saw this might not be the cause of your porblem, as my laptop has lived a rough and fun life so far, but i thought i would share this with you all as i have had contstant help from this forum and others searches for solutions to problems with my apple products.Already tried SMC and PRAM-reset with no luck.
On my MacBook late 2008 it's the same effect. -
Z77A-GD65 no longer boots with 4 RAM modules
I had 4 x 8GB Cosair Vengeance LP that used to work fine, but no longer boots into Windows with 4 but only with 2 RAM modules. Any help in solving the issue would be appreciated. ( I need 32 GB as I run many virtual machines )
The 4 modules worked fine for few months until couple weeks ago, when I saw issues with booting into Windows 7. The workaround was to "warm up" by leaving the PC in BIOS for about 5 minutes and it would boot fine. Since couple days ago, it would POST but not boot into Windows or into live Linux on USB, so I started troubleshooting with bare bones first ( MB, CPU, 1 RAM, PS ) and then starting adding more and more components until I found that 1 and 2 RAM modules worked in either black or blue rail but with 4 RAM modules, it will POST, but not boot at all into either USB based live system or into Windows 7.
Memtest with 2 separate sets of modules pass with flying colors. Mixing the sets work fine too, but add 2nd set (i.e. 4 modules) and it fails to boot. I am leaning more toward believing the issue is with the MB than with the RAM since mixing them doesn't throw any memory error.
Any suggestion on how to check if it's the RAM or MB ?Quote from: PirateDog on 25-November-13, 00:23:30
If these were 2 kits mixed, ...
These were 2 mixed kits.
Quote from: XFM on 25-November-13, 07:01:42
What voltage is the RAM running? A slight bump up in voltage might help.
As to voltage, I started with standard 1.5 and then incrementally upped it to 1.65v. At 1.6v and above, it does boot into Windows, but intermittently goes into BSOD... Works perfect with 1.5v with 2 RAM modules.
I'll save the money for next build instead of going for 32GB kit. ... guess I'll live with 16GB for now.
Thank you all for the advice.
Maybe you are looking for
-
Ical Icloud synch problem - new
I have a problem with Ical sync with iCloud on one of my two Imacs, both running latest Lion 10.7.3. On one of the iMacs, the synch works the way it should - meaning that any change I make in the iCloud calendar gets pushed to that iMac, and any cha
-
Using USB-6008 on LIS331 Accelerometer
Hi, I am looking to monitor my project with a LIS331 using the USB-6008 dac. Would this dac unit be acceptable with this accelerometer?
-
Font for photo info does not work on this MAC
We are running a new MAC (OS 10.6.2, 2.66 GHz Quad) with Lightroom 2.6. When I try to add photo data to a contact print, I see a series of boxes with AAAs. I got the same result with the Identy Plate when I changed the font. I changed to another f
-
Cutting a jpeg into several jpegs
>> using Illustrator in Creative Suite 2 I have 100 ai files that have 3 pictures in each of them. I exported them to jpg and I have 100 jpegs. Now I want a jped for each of the pictures in each of the 100 files -- so, totally I need 100 files * 3 pi
-
In SAP Business By Design , in a customer account we can see two balances: 1. Open item Totals in Transaction Currency 2.Valuated Balance in Company Currency Why in some cases the two balances differ ?? Further for credit limit of Customer the balanc