Long Boot Time - 2011 Mac Mini, 10.7.4

I'm experiencing a pretty substantial delay when booting my Mac mini; it takes about 70 seconds from power button to desktop.  I'm using a newly installed OWC SSD and a fresh install of OS X 10.7.4.  After doing performing some basic troubleshooting (repair permissions, clear caches, reset SMC, re-affirm startup disk, etc.), I decided to boot into verbose mode and see where the process was getting delayed
The system boots normally until I see the message "AppleThunderboltNHI::enablePower - turn power off, status = 0x0, result_value = 0x0".  The boot process hangs there for 45 seconds before the desktop appears.  The kernel.log confirms this:
May 24 21:34:54 localhost kernel[0]: PMAP: PCID enabled
May 24 21:34:54 localhost kernel[0]: Darwin Kernel Version 11.4.0: Mon Apr  9 19:32:15 PDT 2012; root:xnu-1699.26.8~1/RELEASE_X86_64
May 24 21:34:54 localhost kernel[0]: vm_page_bootstrap: 2010023 free pages and 70745 wired pages
May 24 21:34:54 localhost kernel[0]: kext submap [0xffffff7f80732000 - 0xffffff8000000000], kernel text [0xffffff8000200000 - 0xffffff8000732000]
May 24 21:34:54 localhost kernel[0]: zone leak detection enabled
May 24 21:34:54 localhost kernel[0]: standard timeslicing quantum is 10000 us
May 24 21:34:54 localhost kernel[0]: mig_table_max_displ = 73
May 24 21:34:54 localhost kernel[0]: TSC Deadline Timer supported and enabled
May 24 21:34:54 localhost kernel[0]: AppleACPICPU: ProcessorId=1 LocalApicId=0 Enabled
May 24 21:34:54 localhost kernel[0]: AppleACPICPU: ProcessorId=2 LocalApicId=2 Enabled
May 24 21:34:54 localhost kernel[0]: AppleACPICPU: ProcessorId=3 LocalApicId=1 Enabled
May 24 21:34:54 localhost kernel[0]: AppleACPICPU: ProcessorId=4 LocalApicId=3 Enabled
May 24 21:34:54 localhost kernel[0]: AppleACPICPU: ProcessorId=5 LocalApicId=255 Disabled
May 24 21:34:54 localhost kernel[0]: AppleACPICPU: ProcessorId=6 LocalApicId=255 Disabled
May 24 21:34:54 localhost kernel[0]: AppleACPICPU: ProcessorId=7 LocalApicId=255 Disabled
May 24 21:34:54 localhost kernel[0]: AppleACPICPU: ProcessorId=8 LocalApicId=255 Disabled
May 24 21:34:54 localhost kernel[0]: calling mpo_policy_init for TMSafetyNet
May 24 21:34:54 localhost kernel[0]: Security policy loaded: Safety net for Time Machine (TMSafetyNet)
May 24 21:34:54 localhost kernel[0]: calling mpo_policy_init for Sandbox
May 24 21:34:54 localhost kernel[0]: Security policy loaded: Seatbelt sandbox policy (Sandbox)
May 24 21:34:54 localhost kernel[0]: calling mpo_policy_init for Quarantine
May 24 21:34:54 localhost kernel[0]: Security policy loaded: Quarantine policy (Quarantine)
May 24 21:34:54 localhost kernel[0]: Copyright (c) 1982, 1986, 1989, 1991, 1993
May 24 21:34:54 localhost kernel[0]: The Regents of the University of California. All rights reserved.
May 24 21:34:54 localhost kernel[0]: MAC Framework successfully initialized
May 24 21:34:54 localhost kernel[0]: using 16384 buffer headers and 10240 cluster IO buffer headers
May 24 21:34:54 localhost kernel[0]: IOAPIC: Version 0x20 Vectors 64:87
May 24 21:34:54 localhost kernel[0]: ACPI: System State [S0 S3 S4 S5]
May 24 21:34:54 localhost kernel[0]: PFM64 (36 cpu) 0xf10000000, 0xf0000000
May 24 21:34:54 localhost kernel[0]: [ PCI configuration begin ]
May 24 21:34:54 localhost kernel[0]: AppleIntelCPUPowerManagement: Turbo Ratios 0046
May 24 21:34:54 localhost kernel[0]: AppleIntelCPUPowerManagement: (built 19:39:51 Apr  9 2012) initialization complete
May 24 21:34:54 localhost kernel[0]: console relocated to 0xf11000000
May 24 21:34:54 localhost kernel[0]: PCI configuration changed (bridge=16 device=4 cardbus=0)
May 24 21:34:54 localhost kernel[0]: [ PCI configuration end, bridges 13 devices 16 ]
May 24 21:34:54 localhost kernel[0]: mbinit: done [96 MB total pool size, (64/32) split]
May 24 21:34:54 localhost kernel[0]: Pthread support ABORTS when sync kernel primitives misused
May 24 21:34:54 localhost kernel[0]: com.apple.AppleFSCompressionTypeZlib kmod start
May 24 21:34:54 localhost kernel[0]: com.apple.AppleFSCompressionTypeDataless kmod start
May 24 21:34:54 localhost kernel[0]: com.apple.AppleFSCompressionTypeZlib load succeeded
May 24 21:34:54 localhost kernel[0]: com.apple.AppleFSCompressionTypeDataless load succeeded
May 24 21:34:54 localhost kernel[0]: AppleIntelCPUPowerManagementClient: ready
May 24 21:34:54 localhost kernel[0]: FireWire (OHCI) TI ID 823f built-in now active, GUID c82a14fffeeb9442; max speed s800.
May 24 21:34:54 localhost kernel[0]: BTCOEXIST off
May 24 21:34:54 localhost kernel[0]: wl0: Broadcom BCM4331 802.11 Wireless Controller
May 24 21:34:54 localhost kernel[0]: 5.106.198.4
May 24 21:34:54 localhost kernel[0]: [IOBluetoothHCIController::setConfigState] calling registerService
May 24 21:34:54 localhost kernel[0]: rooting via boot-uuid from /chosen: 4608A34C-3371-3AF7-B7BF-ABFC9499F77E
May 24 21:34:54 localhost kernel[0]: Waiting on <dict ID="0"><key>IOProviderClass</key><string ID="1">IOResources</string><key>IOResourceMatch</key><string ID="2">boot-uuid-media</string></dict>
May 24 21:34:54 localhost kernel[0]: Got boot device = IOService:/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/SATA@1F,2/AppleIntelPchS eriesAHCI/PRT0@0/IOAHCIDevice@0/AppleAHCIDiskDriver/IOAHCIBlockStorageDevice/IOB lockStorageDriver/OWC Mercury Electra 6G SSD Media/IOGUIDPartitionScheme/SSD@2
May 24 21:34:54 localhost kernel[0]: BSD root: disk0s2, major 14, minor 1
May 24 21:34:54 localhost kernel[0]: Kernel is LP64
May 24 21:34:54 localhost kernel[0]: USBMSC Identifier (non-unique): FFFACFF0FF110625FBF400F7E9F4DF 0x1bcf 0xc31 0x10f
May 24 21:34:55 localhost kernel[0]: AirPort_Brcm4331: Ethernet address b8:c7:5d:13:46:37
May 24 21:34:55 localhost kernel[0]: IO80211Controller::dataLinkLayerAttachComplete():  adding AppleEFINVRAM notification
May 24 21:34:55 localhost kernel[0]: IO80211Interface::efiNVRAMPublished(): 
May 24 21:34:56 localhost kernel[0]: in func createVirtualInterface ifRole = 1
May 24 21:34:56 localhost kernel[0]: Created virtif 0xffffff8012845600 p2p0
May 24 21:34:56 localhost kernel[0]: AirPort: Link Down on en1. Reason 1 (Unspecified).
May 24 21:34:56 localhost kernel[0]: BCM5701Enet: Ethernet address c8:2a:14:59:43:51
May 24 21:34:56 localhost kernel[0]: Previous Shutdown Cause: 0
May 24 21:34:56 Mini kernel[0]: SMC::smcInitHelper ERROR: MMIO regMap == NULL - fall back to old SMC mode
May 24 21:34:57 Mini kernel[0]: DSMOS has arrived
May 24 21:34:58 Mini kernel[0]: MacAuthEvent en1   Auth result for: 00:24:a5:c9:d9:ce  MAC AUTH succeeded
May 24 21:34:58 Mini kernel[0]: wlEvent: en1 en1 Link UP virtIf = 0
May 24 21:34:58 Mini kernel[0]: AirPort: Link Up on en1
May 24 21:34:58 Mini kernel[0]: en1: BSSID changed to 00:24:a5:c9:d9:ce
May 24 21:34:59 Mini kernel[0]: AirPort: RSN handshake complete on en1
May 24 21:34:59 Mini kernel[0]: macx_swapon SUCCESS
May 24 21:35:00 mini kernel[0]: [ffffff8011712c00][BNBTrackpadDevice::init][70.12] init is complete
May 24 21:35:00 mini kernel[0]: [ffffff8011712c00][BNBTrackpadDevice::handleStart][70.12] returning 1
May 24 21:35:00 mini kernel[0]: [ffffff8013388a00][AppleMultitouchHIDEventDriver::start] entered
May 24 21:35:00 mini kernel[0]: [ffffff801339af00][AppleMultitouchDevice::start] entered
May 24 21:35:04 mini kernel[0]: AppleThunderboltNHI::enablePower - turn power off, status = 0x0, result_value = 0x0
May 24 21:35:49 mini kernel[0]: EDID CEA Extensions not valid for audio [no extended EDID]
Any ideas about what's causing this boot delay?  Although my SSD performs great once the desktop appears, the boot time leaves much to be desired.  My system used to boot faster from my FireWire hard drive!

Sorry for the delay.  I tried an experiment, which I think confirms your suspicion about the HDMI monitor.  It's actually a DVI monitor using the Apple HDMI->DVI adapter that shipped with the Mac mini.  I reinstalled OS X 10.7 (10.7.3) and didn't perform any updates or software installations.  This cut down on the log messages, and eliminated some other variables.
Below are the kernel.log entries for two successive reboots.  The first boot is a normal one, with the monitor attached.  The second boot occurred with the HDMI adapter unplugged; I plugged it back in after several minutes to verify that the "EDID" message is triggered by this action.
===============================================================
May 24 23:36:17 localhost kernel[0]: PMAP: PCID enabled
May 24 23:36:17 localhost kernel[0]: Darwin Kernel Version 11.3.0: Thu Jan 12 18:47:41 PST 2012; root:xnu-1699.24.23~1/RELEASE_X86_64
May 24 23:36:17 localhost kernel[0]: vm_page_bootstrap: 2006985 free pages and 73783 wired pages
May 24 23:36:17 localhost kernel[0]: kext submap [0xffffff7f8072f000 - 0xffffff8000000000], kernel text [0xffffff8000200000 - 0xffffff800072f000]
May 24 23:36:17 localhost kernel[0]: zone leak detection enabled
May 24 23:36:17 localhost kernel[0]: standard timeslicing quantum is 10000 us
May 24 23:36:17 localhost kernel[0]: mig_table_max_displ = 73
May 24 23:36:17 localhost kernel[0]: TSC Deadline Timer supported and enabled
May 24 23:36:17 localhost kernel[0]: AppleACPICPU: ProcessorId=1 LocalApicId=0 Enabled
May 24 23:36:17 localhost kernel[0]: AppleACPICPU: ProcessorId=2 LocalApicId=2 Enabled
May 24 23:36:17 localhost kernel[0]: AppleACPICPU: ProcessorId=3 LocalApicId=1 Enabled
May 24 23:36:17 localhost kernel[0]: AppleACPICPU: ProcessorId=4 LocalApicId=3 Enabled
May 24 23:36:17 localhost kernel[0]: AppleACPICPU: ProcessorId=5 LocalApicId=255 Disabled
May 24 23:36:17 localhost kernel[0]: AppleACPICPU: ProcessorId=6 LocalApicId=255 Disabled
May 24 23:36:17 localhost kernel[0]: AppleACPICPU: ProcessorId=7 LocalApicId=255 Disabled
May 24 23:36:17 localhost kernel[0]: AppleACPICPU: ProcessorId=8 LocalApicId=255 Disabled
May 24 23:36:17 localhost kernel[0]: calling mpo_policy_init for TMSafetyNet
May 24 23:36:17 localhost kernel[0]: Security policy loaded: Safety net for Time Machine (TMSafetyNet)
May 24 23:36:17 localhost kernel[0]: calling mpo_policy_init for Sandbox
May 24 23:36:17 localhost kernel[0]: Security policy loaded: Seatbelt sandbox policy (Sandbox)
May 24 23:36:17 localhost kernel[0]: calling mpo_policy_init for Quarantine
May 24 23:36:17 localhost kernel[0]: Security policy loaded: Quarantine policy (Quarantine)
May 24 23:36:17 localhost kernel[0]: Copyright (c) 1982, 1986, 1989, 1991, 1993
May 24 23:36:17 localhost kernel[0]: The Regents of the University of California. All rights reserved.
May 24 23:36:17 localhost kernel[0]: MAC Framework successfully initialized
May 24 23:36:17 localhost kernel[0]: using 16384 buffer headers and 10240 cluster IO buffer headers
May 24 23:36:17 localhost kernel[0]: IOAPIC: Version 0x20 Vectors 64:87
May 24 23:36:17 localhost kernel[0]: ACPI: System State [S0 S3 S4 S5] (S3)
May 24 23:36:17 localhost kernel[0]: PFM64 (36 cpu) 0xf10000000, 0xf0000000
May 24 23:36:17 localhost kernel[0]: [ PCI configuration begin ]
May 24 23:36:17 localhost kernel[0]: AppleIntelCPUPowerManagement: Turbo Ratios 0046
May 24 23:36:17 localhost kernel[0]: AppleIntelCPUPowerManagement: (built 18:56:37 Jan 12 2012) initialization complete
May 24 23:36:17 localhost kernel[0]: console relocated to 0xf11000000
May 24 23:36:17 localhost kernel[0]: PCI configuration changed (bridge=16 device=4 cardbus=0)
May 24 23:36:17 localhost kernel[0]: [ PCI configuration end, bridges 13 devices 16 ]
May 24 23:36:17 localhost kernel[0]: mbinit: done [96 MB total pool size, (64/32) split]
May 24 23:36:17 localhost kernel[0]: Pthread support ABORTS when sync kernel primitives misused
May 24 23:36:17 localhost kernel[0]: com.apple.AppleFSCompressionTypeZlib kmod start
May 24 23:36:17 localhost kernel[0]: com.apple.AppleFSCompressionTypeDataless kmod start
May 24 23:36:17 localhost kernel[0]: com.apple.AppleFSCompressionTypeZlib load succeeded
May 24 23:36:17 localhost kernel[0]: com.apple.AppleFSCompressionTypeDataless load succeeded
May 24 23:36:17 localhost kernel[0]: AppleIntelCPUPowerManagementClient: ready
May 24 23:36:17 localhost kernel[0]: FireWire (OHCI) TI ID 823f built-in now active, GUID c82a14fffeeb9442; max speed s800.
May 24 23:36:17 localhost kernel[0]: rooting via boot-uuid from /chosen: 07528477-5E38-3CB9-8487-D352BF8814E7
May 24 23:36:17 localhost kernel[0]: Waiting on <dict ID="0"><key>IOProviderClass</key><string ID="1">IOResources</string><key>IOResourceMatch</key><string ID="2">boot-uuid-media</string></dict>
May 24 23:36:17 localhost kernel[0]: Got boot device = IOService:/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/SATA@1F,2/AppleIntelPchS eriesAHCI/PRT0@0/IOAHCIDevice@0/AppleAHCIDiskDriver/IOAHCIBlockStorageDevice/IOB lockStorageDriver/OWC Mercury Electra 6G SSD Media/IOGUIDPartitionScheme/SSD@2
May 24 23:36:17 localhost kernel[0]: BSD root: disk0s2, major 14, minor 2
May 24 23:36:17 localhost kernel[0]: Kernel is LP64
May 24 23:36:17 localhost kernel[0]: [IOBluetoothHCIController::setConfigState] calling registerService
May 24 23:36:21 Erics-Mac-mini kernel[0]: BTCOEXIST off
May 24 23:36:21 Erics-Mac-mini kernel[0]: wl0: Broadcom BCM4331 802.11 Wireless Controller
May 24 23:36:21 Erics-Mac-mini kernel[0]: 5.100.98.75
May 24 23:36:21 Erics-Mac-mini kernel[0]: Previous Shutdown Cause: 5
May 24 23:36:21 Erics-Mac-mini kernel[0]: [ffffff8013db0c00][BNBTrackpadDevice::init][66.6] init is complete
May 24 23:36:22 Erics-Mac-mini kernel[0]: [ffffff8013db0c00][BNBTrackpadDevice::handleStart][66.6] Done
May 24 23:36:22 Erics-Mac-mini kernel[0]: [ffffff8014b3c200][AppleMultitouchHIDEventDriver::start] entered
May 24 23:36:22 Erics-Mac-mini kernel[0]: [ffffff8013d11000][AppleMultitouchDevice::start] entered
May 24 23:36:22 Erics-Mac-mini kernel[0]: macx_swapon SUCCESS
May 24 23:36:22 Erics-Mac-mini kernel[0]: Waiting for DSMOS...
May 24 23:36:23 Erics-Mac-mini kernel[0]: DSMOS has arrived
May 24 23:36:23 Erics-Mac-mini kernel[0]: AirPort_Brcm4331: Ethernet address b8:c7:5d:13:46:37
May 24 23:36:23 Erics-Mac-mini kernel[0]: IO80211Controller::dataLinkLayerAttachComplete():  adding AppleEFINVRAM notification
May 24 23:36:23 Erics-Mac-mini kernel[0]: IO80211Interface::efiNVRAMPublished(): 
May 24 23:36:23 Erics-Mac-mini kernel[0]: AirPort: Link Down on en1. Reason 1 (Unspecified).
May 24 23:36:23 Erics-Mac-mini kernel[0]: Created virtif 0xffffff8015149c00 p2p0
May 24 23:36:24 Erics-Mac-mini kernel[0]: BCM5701Enet: Ethernet address c8:2a:14:59:43:51
May 24 23:37:13 Erics-Mac-mini kernel[0]: EDID does not contain Extended EDID, not valid for audio
================================================================
******Headless Reboot.  Waited a few minutes before connecting monitor again.
================================================================
May 24 23:39:39 localhost kernel[0]: PMAP: PCID enabled
May 24 23:39:39 localhost kernel[0]: Darwin Kernel Version 11.3.0: Thu Jan 12 18:47:41 PST 2012; root:xnu-1699.24.23~1/RELEASE_X86_64
May 24 23:39:39 localhost kernel[0]: vm_page_bootstrap: 2006985 free pages and 73783 wired pages
May 24 23:39:39 localhost kernel[0]: kext submap [0xffffff7f8072f000 - 0xffffff8000000000], kernel text [0xffffff8000200000 - 0xffffff800072f000]
May 24 23:39:39 localhost kernel[0]: zone leak detection enabled
May 24 23:39:39 localhost kernel[0]: standard timeslicing quantum is 10000 us
May 24 23:39:39 localhost kernel[0]: mig_table_max_displ = 73
May 24 23:39:39 localhost kernel[0]: TSC Deadline Timer supported and enabled
May 24 23:39:39 localhost kernel[0]: AppleACPICPU: ProcessorId=1 LocalApicId=0 Enabled
May 24 23:39:39 localhost kernel[0]: AppleACPICPU: ProcessorId=2 LocalApicId=2 Enabled
May 24 23:39:39 localhost kernel[0]: AppleACPICPU: ProcessorId=3 LocalApicId=1 Enabled
May 24 23:39:39 localhost kernel[0]: AppleACPICPU: ProcessorId=4 LocalApicId=3 Enabled
May 24 23:39:39 localhost kernel[0]: AppleACPICPU: ProcessorId=5 LocalApicId=255 Disabled
May 24 23:39:39 localhost kernel[0]: AppleACPICPU: ProcessorId=6 LocalApicId=255 Disabled
May 24 23:39:39 localhost kernel[0]: AppleACPICPU: ProcessorId=7 LocalApicId=255 Disabled
May 24 23:39:39 localhost kernel[0]: AppleACPICPU: ProcessorId=8 LocalApicId=255 Disabled
May 24 23:39:39 localhost kernel[0]: calling mpo_policy_init for TMSafetyNet
May 24 23:39:39 localhost kernel[0]: Security policy loaded: Safety net for Time Machine (TMSafetyNet)
May 24 23:39:39 localhost kernel[0]: calling mpo_policy_init for Sandbox
May 24 23:39:39 localhost kernel[0]: Security policy loaded: Seatbelt sandbox policy (Sandbox)
May 24 23:39:39 localhost kernel[0]: calling mpo_policy_init for Quarantine
May 24 23:39:39 localhost kernel[0]: Security policy loaded: Quarantine policy (Quarantine)
May 24 23:39:39 localhost kernel[0]: Copyright (c) 1982, 1986, 1989, 1991, 1993
May 24 23:39:39 localhost kernel[0]: The Regents of the University of California. All rights reserved.
May 24 23:39:39 localhost kernel[0]: MAC Framework successfully initialized
May 24 23:39:39 localhost kernel[0]: using 16384 buffer headers and 10240 cluster IO buffer headers
May 24 23:39:39 localhost kernel[0]: IOAPIC: Version 0x20 Vectors 64:87
May 24 23:39:39 localhost kernel[0]: ACPI: System State [S0 S3 S4 S5] (S3)
May 24 23:39:39 localhost kernel[0]: PFM64 (36 cpu) 0xf10000000, 0xf0000000
May 24 23:39:39 localhost kernel[0]: [ PCI configuration begin ]
May 24 23:39:39 localhost kernel[0]: AppleIntelCPUPowerManagement: Turbo Ratios 0046
May 24 23:39:39 localhost kernel[0]: AppleIntelCPUPowerManagement: (built 18:56:37 Jan 12 2012) initialization complete
May 24 23:39:39 localhost kernel[0]: console relocated to 0xf11000000
May 24 23:39:39 localhost kernel[0]: PCI configuration changed (bridge=16 device=4 cardbus=0)
May 24 23:39:39 localhost kernel[0]: [ PCI configuration end, bridges 13 devices 16 ]
May 24 23:39:39 localhost kernel[0]: mbinit: done [96 MB total pool size, (64/32) split]
May 24 23:39:39 localhost kernel[0]: Pthread support ABORTS when sync kernel primitives misused
May 24 23:39:39 localhost kernel[0]: com.apple.AppleFSCompressionTypeZlib kmod start
May 24 23:39:39 localhost kernel[0]: com.apple.AppleFSCompressionTypeDataless kmod start
May 24 23:39:39 localhost kernel[0]: com.apple.AppleFSCompressionTypeZlib load succeeded
May 24 23:39:39 localhost kernel[0]: com.apple.AppleFSCompressionTypeDataless load succeeded
May 24 23:39:39 localhost kernel[0]: AppleIntelCPUPowerManagementClient: ready
May 24 23:39:39 localhost kernel[0]: FireWire (OHCI) TI ID 823f built-in now active, GUID c82a14fffeeb9442; max speed s800.
May 24 23:39:39 localhost kernel[0]: rooting via boot-uuid from /chosen: 07528477-5E38-3CB9-8487-D352BF8814E7
May 24 23:39:39 localhost kernel[0]: Waiting on <dict ID="0"><key>IOProviderClass</key><string ID="1">IOResources</string><key>IOResourceMatch</key><string ID="2">boot-uuid-media</string></dict>
May 24 23:39:39 localhost kernel[0]: Got boot device = IOService:/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/SATA@1F,2/AppleIntelPchS eriesAHCI/PRT0@0/IOAHCIDevice@0/AppleAHCIDiskDriver/IOAHCIBlockStorageDevice/IOB lockStorageDriver/OWC Mercury Electra 6G SSD Media/IOGUIDPartitionScheme/SSD@2
May 24 23:39:39 localhost kernel[0]: BSD root: disk0s2, major 14, minor 2
May 24 23:39:39 localhost kernel[0]: Kernel is LP64
May 24 23:39:39 localhost kernel[0]: [IOBluetoothHCIController::setConfigState] calling registerService
May 24 23:39:43 Erics-Mac-mini kernel[0]: BTCOEXIST off
May 24 23:39:43 Erics-Mac-mini kernel[0]: wl0: Broadcom BCM4331 802.11 Wireless Controller
May 24 23:39:43 Erics-Mac-mini kernel[0]: 5.100.98.75
May 24 23:39:43 Erics-Mac-mini kernel[0]: Previous Shutdown Cause: 5
May 24 23:39:43 Erics-Mac-mini kernel[0]: [ffffff80139a3800][BNBTrackpadDevice::init][66.6] init is complete
May 24 23:39:44 Erics-Mac-mini kernel[0]: [ffffff80139a3800][BNBTrackpadDevice::handleStart][66.6] Done
May 24 23:39:44 Erics-Mac-mini kernel[0]: [ffffff801472fc00][AppleMultitouchHIDEventDriver::start] entered
May 24 23:39:44 Erics-Mac-mini kernel[0]: [ffffff8013964600][AppleMultitouchDevice::start] entered
May 24 23:39:44 Erics-Mac-mini kernel[0]: macx_swapon SUCCESS
May 24 23:39:44 Erics-Mac-mini kernel[0]: Waiting for DSMOS...
May 24 23:39:45 Erics-Mac-mini kernel[0]: DSMOS has arrived
May 24 23:39:45 Erics-Mac-mini kernel[0]: AirPort_Brcm4331: Ethernet address b8:c7:5d:13:46:37
May 24 23:39:45 Erics-Mac-mini kernel[0]: IO80211Controller::dataLinkLayerAttachComplete():  adding AppleEFINVRAM notification
May 24 23:39:45 Erics-Mac-mini kernel[0]: IO80211Interface::efiNVRAMPublished(): 
May 24 23:39:45 Erics-Mac-mini kernel[0]: AirPort: Link Down on en1. Reason 1 (Unspecified).
May 24 23:39:45 Erics-Mac-mini kernel[0]: Created virtif 0xffffff8014d1a800 p2p0
May 24 23:39:46 Erics-Mac-mini kernel[0]: BCM5701Enet: Ethernet address c8:2a:14:59:43:51
May 24 23:41:47 Erics-Mac-mini kernel[0]: AppleBCM5701Ethernet:        0        0 restartAdapter - running PXE restart/recovery code
May 24 23:42:28 Erics-Mac-mini kernel[0]: EDID does not contain Extended EDID, not valid for audio

Similar Messages

  • Win 7 Activation in Boot Camp on Mid-2011 Mac Mini?

    I bought my wife a new Mid-2011 Mac Mini (2.3 GHz) to replace her older 1.66 GHz Mac Mini. After running all the Apple updates and getting the new Lion Mini set up the way she likes, I downloaded Windows Support software, ran Windows Easy Transfer on the old Mac Mini Win 7, and then ran Boot Camp on the new Lion Mini in preparation to installing Windows 7.
    Then I installed Win 7, installed all the Windows updates and had a perfectly fine installation of Windows 7 running. Until I tried to activate Win 7 online. I got the message that I had entered an invalid Product Key. So I entered the Product Key again, but I kept getting the message that the Product Key wasn't correct and that I needed to buy another one.
    This stunned me, as I had used the same product key to install Win 7 on my wife's old Mac Mini, which is now out of service. After Googling around for hints, I discovered something that I had missed: In Boot Camp 4.01 in Lion 10.7, a full-install retail version of Win 7 is needed. Aha! I had used the Upgrade version of Win 7 (Family Pack) I bought in late 2009 from Microsoft (I have 3 valid full-install Win XP and Vista licenses). I used the MS-approved double-install method to install Win 7 on the new Mac Mini to avoid the install-then-upgrade waste of time, not even knowing I couldn't install XP or Vista in a Boot Camp 4.01 partition.
    I actually have two Win 7 Family Packs, bought in late-2009, and I have 6 valid full-install XP and Vista licenses/discs. Only 4 of those Win 7 installs were actively being used until yesterday, although all 6 have been activated in the past.
    So here are my questions: Is the Lion Boot Camp 4.01 requirement of a full-install Win 7 disk causing the activation problem, or do I need to call Microsoft for a manual activation? Will Microsoft refuse to activate a copy of Win 7 Upgrade on my brand-new Lion Mac Mini even if I can provide proof of legal Product Keys?
    Thanks for any help, insight, tips. What a complicated mess progress can be!

    Solved the problem by using the Windows automated activation via phone. It took me several tries before I gave the right answer about how many computers had been activated with that particular Windows 7 Upgrade family pack Product Key. The magic answer was/is "one", even though I know for a fact that two computers in my household were actively using that Product Key. Go figure.
    Anyway, the good news is that you *can* use a Windows 7 Upgrade disk to install Win 7 in Boot Camp 4.01 in Lion on a mid-2011 Mac Mini, despite what Apple says. I'm going to guess that Apple is trying to steer its customers away from just the sort of thing I've gone through. Further good news is that Microsoft doesn't care about the Mac side of the equation at all, just that you can satisfy their phonebot with the right answers. :^)
    Thank God Apple not only doesn't use activation for its OS, but also in fact is headed willy nilly in the opposite direction with Lion.

  • 2011 Mac Mini, 10.8.3, SSD - System CPU at constant 10%, frequent 0.5 sec cursor freezes

    Hi.  I have a Mid-2011 Mac Mini with 8GB of RAM. I have an SSD installed in it as the primary drive, along with another internal 2TB drive and an external USB 2TB drive for media. This machine is mostly used as a media server and player.  It's been running Mountain Lion since I bought it (refurb) last year.  I upgraded to 10.8.3 as soon as that came out, and was running for a while without any problems. This evening, though, I started to notice some problems.
    The main issue is that the CPU (well, one core) seems to be constantly under load. Under Activity Monitor I'm watching the system load (but not user load) hover between about 8% and 12%, all of the time.  But looking at the program list, I don't see anything taking up more than about 2% of CPU, and that is taken up by Activity Monitor itself.
    The annoying way that this manifests itself in the UI is that if I'm just randomly moving the cursor around in a circle, I can watch it periodically hang and freeze for about half of a second every 3-4 seconds or so. Meanwhile, everything else on the system also seems to freeze up for about half a second at the same time, which makes watching Netflix extremely irritating. (With Netflix the sound plays as normal, but the video freezes briefly every few seconds - I verified this in both Firefox and Chrome so I doubt it's a browser thing.)
    I've already tried some troubleshooting steps myself. (None of this has worked yet.)
    I saw a lot of messages in console about "mdworker deny mach-lookup com.apple.ls.boxd", which googling around for led me to this page; per the instructions there I booted into safe mode, waited a bit and rebooted, and now I don't see those messages any more. (I didn't mess with the sandbox.sb file, about which, really? Apple implemented this in Scheme or something?)  Just to be on the safe side, though, I disabled Spotlight indexing with sudo mdutil -a -i off.
    I opened Disk Util and ran a verify on all three disks, no errors.  I found one or two permissions that needed repairing on the startup SSD and repaired them.  The problem persisted.  I also cleared out my caches with Maintenance while I was at it.
    As a side note, even when I rebooted in safe mode, I was still seeing the same behavior (periodic half-second mouse freezes, system CPU averaging a constant 10% or so in Activity Monitor).
    I also spent some time reading this other thread which looked like it had some very useful advice (unlike that poster, though, my Spotlight processes aren't crashing).  So I went ahead and followed Linc Davis's first set of instructions in that thread.  Here's what I've got for steps 1 and 2.
    1. Activity monitor
    Highest-CPU process is Activity Monitor at about 1-2% CPU
    CPU: User 1%, system ~10%, idle ~90%
    System memory: Page outs 0, swap used 0 bytes
    Disk activity: Reads in/sec 0, Writes out/sec 0 (these infrequently spike up to about 40 or 50 max)
    2. System log
    I put up a gist for this here.  It's my last 50 messages or so, probably some are coming from the most recent reboot.  I can see the "IOHIDSystem cursor update overdue. Resending" messages which I presume are linked to my cursor freezes, but nothing else looks obviously suspicious to me.  The stuff about "menucracker" is down to MenuMeters; I uninstalled it and rebooted at one point just to check, but it didn't seem to make a difference so I reinstalled it.
    As far as kexts go, the only one I had that wasn't Apple was SoundFlower. I actually need that one, I use it to stream files from Plex, but I went ahead and uninstalled it anyways, and it didn't make a difference.  My launchd lists start up sickbeard, sabnzbd, and plex, but I've manually quit all of those and the problem persists, so I highly douby any of them are to blame.
    Any advice greatly appreciated.  Is there a better way that I can see what exactly is causing the high system CPU load, like can I list processes by number of kernel calls or something?  I did try top and ps but I didn't see anything obviously different from Activity Monitor in their output.

    Nope, I don't have a "/Users/charon/Library/Mobile Documents" directory, let alone anything underneath it. Is that like an iCloud thing or something?  I tend to avoid the Apple-supplied services when I can (I don't use iTunes either unless I can help it).
    As an update, as of about two days later this problem seems to have solved itself. Possibly sleeping and waking did something to it (though that seems unlikely given how many times I rebooted), or else there was just some long-*** kernel process that finally worked itself out.  But my system CPU is back down to normal and the cursor freezes are gone.
    ??? it is a mystery! ???

  • MacBook pro Extremely long booting time After 10.10.1 + strange icons when booting

    Hi all,
    since the Yosemite update and the sequential patch, I've been experiencing lots and lots of issues with this releade
    I posses a
    MacBook Pro (13-inch, Mid 2012)
    2,5 GHz Intel Core i5
    After a week after the Yosemite update my Mac just froze, and for a couple of days I was unable to access it. after 4 attempts of Clean install i was finally able to restore it. but the issue with long booting time and free after sleep/wake action are the same .
    I'm experiencing strange icons during boot as follows:
    Only after a second reboot and clearing ram with Cmd+Alt+P+R i'm able to get rid of this , and the reboot shows this
    That after 5 mins changes into this
    This routine keeps happening, every single time i have to restart my mac.
    Any suggestions?
    tnks

    Well , i guess i a HDD issue, when i was experiencing the initial issues with yosemite , I've installed the system an external Hdd and everything was working fine.
    So i guess my suspicions were correct. I have to change my hdd.

  • Top memory bank is not working on 2011 mac mini. Checked the ram stick which is working fine.

    Hi all
    Been using my 2011 Mac Mini since October 2011 with no issues at all. upgraded the Ram (2 x 8 =16gb crucial ddr3 1333 sodimm 204) which worked flaulessly  since early 2012.
    last week while workign on some ram intensive stuff my mac froze and made some funky sounds (kinda like C3PO beat boxing) and then would not reboot and beeped at me 3 times. I looked that beep up and it indicated a ram issue. I took out the first stick (closest to the twisty lid) and the mac boots indicating an issue with the bank i guess not the ram.
    What i want to know is if this is possible to fix or if i should just limp on with 8gb ram.
    Thanks
    Harry

    Welcome to Apple Support Communities
    If you have checked with both RAM modules that your Mac doesn't start up when a module is inserted in the first slot, this slot is damaged.
    To replace the slot, the logic board has to be replaced, so it's an expensive repair. If you can live with 8 GB of memory, install only one memory module

  • Slow boot up on mac mini

    Slow boot up on mac mini using mavericks

    Hello,
    First try this...
    Bootup holding CMD+r, or the Option/alt key to boot from the Restore partition & use Disk Utility from there to Repair the Disk, then Repair Permissions.
    Then...
    One way to test is to Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, Test for problem in Safe Mode...
    PS. Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive
    Reboot, test again.
    If it only does it in Regular Boot, then it could be some hardware problem like Video card, (Quartz is turned off in Safe Mode), or Airport, or some USB or Firewire device, or 3rd party add-on, Check System Preferences>Accounts (Users & Groups in later OSX versions)>Login Items window to see if it or something relevant is listed. Or an errant process eating up RAM.
    Check the System Preferences>Other Row, for 3rd party Pref Panes.
    Also look in these if they exist, some are invisible...
    /private/var/run/StartupItems
    /Library/StartupItems
    /System/Library/StartupItems
    /System/Library/LaunchDaemons
    /Library/LaunchDaemons

  • Snow leopard on new 2011 Mac mini?

    Please explain why u can not Install snow leopard on new 2011 Mac mini?

    Actually You Can.  Use any late Macintosh that will run Snow Leopard and either boot from a 10.6.3 universal installer that been intalled on a hard drive (quickest) or boot from the UNIVERSAL OS X 10.6.3 DVD.  The new Mac Mini should be connected via FireWire in TARGET MODE to the host Macintosh.
    Use disk Uitility to format the Mac Mini Hard Drive and install 10.6.3 on it. When it boots (still in target mode) it will be the boot drive for the host macintosh.
    Then install 10.6.8 update and iLife 11 and Applejack (this will fix the install in the end).
    Then run software update and carry out all updates that it indicates.
    After that shut down and take the Mini off Target Mode and disconnect the firewire cable.
    Restart the Mini and run software update again.  Note - the cursor may take any number of shapes at this stage but continue on.  Certainly you wil be asked to run software update OS X 10.6.8 supplemental which should fix the cursor problem.
    Restart and hold dowm <Command><S> until a black screen with white writing appears.  Wait for it to scroll down to the end and at the prompt type applejack AUTO restart and then press <Enter>
    Applejack will run 5 routines which may take some time and at the finish it will restart.
    That should be it!
    One codicil.  If you read the stuff that Applejack brings up you will see that half the processors are not working.  This is no big deal and does not seem to affect the operation at all.
    The good news is that SL will run on a new Mac Mini which should satisfy a lot of users who have apps that are not yet Lion Compatible.
    Happy to communicatewith anyone having problems.  [email protected]

  • Can the Mini DisplayPort to VGA Adapter for a 2011 Mac Mini be used with Windows 7?

    This question concerns the Mini DisplayPort to VGA Adapter described at the below link:
    http://store.apple.com/us/product/MB572Z/A
    When running Windows 7 via Boot Camp on a 2011 Mac Mini, can the above adapter be used with a VGA monitor?

    Thank you for the confirmation, Mr. Peck.

  • [Systemd] Very long boot time

    I have a very long boot time with my Arch.
    Startup finished in 828766ms (kernel) + 63430ms (userspace) = 892196ms
    Especially after login into gnome, it takes quite a while until the desktop is visible. In meanwhile, I only see the wallpaper.  Does anyone has a suggestion how to fix that?
    Linux hostname 3.6.6-1-ARCH #1 SMP PREEMPT Mon Nov 5 11:57:22 CET 2012 x86_64 GNU/Linux
    systemd-analzye blame shows
    18722ms colord.service
    16584ms home.mount
    12666ms plymouth-start.service
    11550ms boot.mount
    11350ms var.mount
    7604ms NetworkManager.service
    7261ms chrony.service
    1985ms wpa_supplicant.service
    1606ms systemd-modules-load.service
    1350ms systemd-tmpfiles-setup.service
    1202ms dev-hugepages.mount
    1189ms dev-mqueue.mount
    1080ms sys-kernel-debug.mount
    987ms systemd-udev-trigger.service
    946ms systemd-udevd.service
    879ms systemd-vconsole-setup.service
    495ms bluetooth.service
    376ms polkit.service
    358ms crashplan.service
    348ms systemd-readahead-replay.service
    346ms lm_sensors.service
    337ms upower.service
    331ms systemd-readahead-collect.service
    311ms systemd-logind.service
    289ms lvmetad.service
    286ms systemd-binfmt.service
    242ms cpupower.service
    206ms systemd-remount-fs.service
    174ms gdm.service
    140ms proc-sys-fs-binfmt_misc.mount
    94ms udisks2.service
    93ms rtkit-daemon.service
    87ms rc-local.service
    86ms systemd-user-sessions.service
    53ms systemd-sysctl.service
    24ms accounts-daemon.service
    2ms tmp.mount
    1ms sys-fs-fuse-connections.mount
    Dmesg shows:
    [ 0.000000] Initializing cgroup subsys cpuset
    [ 0.000000] Initializing cgroup subsys cpu
    [ 0.000000] Linux version 3.6.6-1-ARCH (tobias@T-POWA-LX) (gcc version 4.7.2 (GCC) ) #1 SMP PREEMPT Mon Nov 5 11:57:22 CET 2012
    [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-linux root=/dev/mapper/cryptpool-cryptroot ro quiet splash cryptdevice=/dev/sda2:cryptvol init=/usr/lib/systemd/systemd radeon.modeset=1 pcie_aspm=force
    [ 0.000000] e820: BIOS-provided physical RAM map:
    [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009c3ff] usable
    [ 0.000000] BIOS-e820: [mem 0x000000000009c400-0x000000000009ffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000000d2000-0x00000000000d3fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000c727bfff] usable
    [ 0.000000] BIOS-e820: [mem 0x00000000c727c000-0x00000000c7281fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000c7282000-0x00000000c73ebfff] usable
    [ 0.000000] BIOS-e820: [mem 0x00000000c73ec000-0x00000000c740efff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000c740f000-0x00000000c746efff] usable
    [ 0.000000] BIOS-e820: [mem 0x00000000c746f000-0x00000000c746ffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000c7470000-0x00000000c74f0fff] ACPI NVS
    [ 0.000000] BIOS-e820: [mem 0x00000000c74f1000-0x00000000c770efff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000c770f000-0x00000000c7717fff] usable
    [ 0.000000] BIOS-e820: [mem 0x00000000c7718000-0x00000000c771efff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000c771f000-0x00000000c7770fff] usable
    [ 0.000000] BIOS-e820: [mem 0x00000000c7771000-0x00000000c779efff] ACPI NVS
    [ 0.000000] BIOS-e820: [mem 0x00000000c779f000-0x00000000c77e1fff] usable
    [ 0.000000] BIOS-e820: [mem 0x00000000c77e2000-0x00000000c77fefff] ACPI data
    [ 0.000000] BIOS-e820: [mem 0x00000000c77ff000-0x00000000c77fffff] usable
    [ 0.000000] BIOS-e820: [mem 0x00000000c7800000-0x00000000c7ffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000f1004000-0x00000000f1004fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec0ffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed003ff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed8ffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x0000000237ffffff] usable
    [ 0.000000] NX (Execute Disable) protection: active
    [ 0.000000] DMI present.
    [ 0.000000] DMI: Dell Inc. Studio XPS 1645/0Y517R, BIOS A13 04/01/2011
    [ 0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
    [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
    [ 0.000000] No AGP bridge found
    [ 0.000000] e820: last_pfn = 0x238000 max_arch_pfn = 0x400000000
    [ 0.000000] MTRR default type: uncachable
    [ 0.000000] MTRR fixed ranges enabled:
    [ 0.000000] 00000-9FFFF write-back
    [ 0.000000] A0000-BFFFF uncachable
    [ 0.000000] C0000-CFFFF write-protect
    [ 0.000000] D0000-D3FFF write-through
    [ 0.000000] D4000-D7FFF uncachable
    [ 0.000000] D8000-FFFFF write-through
    [ 0.000000] MTRR variable ranges enabled:
    [ 0.000000] 0 base 0FFE00000 mask FFFE00000 write-protect
    [ 0.000000] 1 base 000000000 mask F80000000 write-back
    [ 0.000000] 2 base 080000000 mask FC0000000 write-back
    [ 0.000000] 3 base 0C0000000 mask FF8000000 write-back
    [ 0.000000] 4 base 100000000 mask F00000000 write-back
    [ 0.000000] 5 base 200000000 mask FE0000000 write-back
    [ 0.000000] 6 base 220000000 mask FF0000000 write-back
    [ 0.000000] 7 base 230000000 mask FF8000000 write-back
    [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    [ 0.000000] e820: last_pfn = 0xc7800 max_arch_pfn = 0x400000000
    [ 0.000000] found SMP MP-table at [mem 0x000f7360-0x000f736f] mapped at [ffff8800000f7360]
    [ 0.000000] initial memory mapped: [mem 0x00000000-0x1fffffff]
    [ 0.000000] Base memory trampoline at [ffff880000096000] 96000 size 24576
    [ 0.000000] init_memory_mapping: [mem 0x00000000-0xc77fffff]
    [ 0.000000] [mem 0x00000000-0xc77fffff] page 2M
    [ 0.000000] kernel direct mapping tables up to 0xc77fffff @ [mem 0x1fffb000-0x1fffffff]
    [ 0.000000] init_memory_mapping: [mem 0x100000000-0x237ffffff]
    [ 0.000000] [mem 0x100000000-0x237ffffff] page 2M
    [ 0.000000] kernel direct mapping tables up to 0x237ffffff @ [mem 0xc77dc000-0xc77e1fff]
    [ 0.000000] RAMDISK: [mem 0x376e0000-0x37b67fff]
    [ 0.000000] ACPI: RSDP 00000000000f7280 00024 (v02 PTLTD )
    [ 0.000000] ACPI: XSDT 00000000c77f4285 00064 (v01 DELL QA09 06040000 LTP 00000000)
    [ 0.000000] ACPI: FACP 00000000c77e4000 000F4 (v03 INTEL CRESTLNE 06040000 ALAN 00000001)
    [ 0.000000] ACPI: DSDT 00000000c77e5000 0A839 (v02 Intel CALPELLA 06040000 INTL 20060912)
    [ 0.000000] ACPI: FACS 00000000c779bfc0 00040
    [ 0.000000] ACPI: HPET 00000000c77fecc2 00038 (v01 INTEL CRESTLNE 06040000 LOHR 0000005A)
    [ 0.000000] ACPI: MCFG 00000000c77fecfa 0003C (v01 INTEL CRESTLNE 06040000 LOHR 0000005A)
    [ 0.000000] ACPI: APIC 00000000c77fed36 000BC (v01 PTLTD ? APIC 06040000 LTP 00000000)
    [ 0.000000] ACPI: BOOT 00000000c77fedf2 00028 (v01 PTLTD $SBFTBL$ 06040000 LTP 00000001)
    [ 0.000000] ACPI: SLIC 00000000c77fee1a 00176 (v01 DELL QA09 06040000 LTP 00000000)
    [ 0.000000] ACPI: OSFR 00000000c77fef90 00070 (v01 DELL DELL 06040000 ASL 00000061)
    [ 0.000000] ACPI: SSDT 00000000c77e3000 009F1 (v01 PmRef CpuPm 00003000 INTL 20060912)
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] No NUMA configuration found
    [ 0.000000] Faking a node at [mem 0x0000000000000000-0x0000000237ffffff]
    [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x237ffffff]
    [ 0.000000] NODE_DATA [mem 0x237ffc000-0x237ffffff]
    [ 0.000000] [ffffea0000000000-ffffea0008dfffff] PMD -> [ffff88022f600000-ffff8802375fffff] on node 0
    [ 0.000000] Zone ranges:
    [ 0.000000] DMA [mem 0x00010000-0x00ffffff]
    [ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
    [ 0.000000] Normal [mem 0x100000000-0x237ffffff]
    [ 0.000000] Movable zone start for each node
    [ 0.000000] Early memory node ranges
    [ 0.000000] node 0: [mem 0x00010000-0x0009bfff]
    [ 0.000000] node 0: [mem 0x00100000-0xc727bfff]
    [ 0.000000] node 0: [mem 0xc7282000-0xc73ebfff]
    [ 0.000000] node 0: [mem 0xc740f000-0xc746efff]
    [ 0.000000] node 0: [mem 0xc770f000-0xc7717fff]
    [ 0.000000] node 0: [mem 0xc771f000-0xc7770fff]
    [ 0.000000] node 0: [mem 0xc779f000-0xc77e1fff]
    [ 0.000000] node 0: [mem 0xc77ff000-0xc77fffff]
    [ 0.000000] node 0: [mem 0x100000000-0x237ffffff]
    [ 0.000000] On node 0 totalpages: 2094193
    [ 0.000000] DMA zone: 64 pages used for memmap
    [ 0.000000] DMA zone: 6 pages reserved
    [ 0.000000] DMA zone: 3910 pages, LIFO batch:0
    [ 0.000000] DMA32 zone: 16320 pages used for memmap
    [ 0.000000] DMA32 zone: 795941 pages, LIFO batch:31
    [ 0.000000] Normal zone: 19968 pages used for memmap
    [ 0.000000] Normal zone: 1257984 pages, LIFO batch:31
    [ 0.000000] ACPI: PM-Timer IO Port: 0x408
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x02] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x06] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x01] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x03] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled)
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
    [ 0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
    [ 0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    [ 0.000000] ACPI: IRQ0 used by override.
    [ 0.000000] ACPI: IRQ2 used by override.
    [ 0.000000] ACPI: IRQ9 used by override.
    [ 0.000000] Using ACPI (MADT) for SMP configuration information
    [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
    [ 0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
    [ 0.000000] nr_irqs_gsi: 40
    [ 0.000000] PM: Registered nosave memory: 000000000009c000 - 000000000009d000
    [ 0.000000] PM: Registered nosave memory: 000000000009d000 - 00000000000a0000
    [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000d2000
    [ 0.000000] PM: Registered nosave memory: 00000000000d2000 - 00000000000d4000
    [ 0.000000] PM: Registered nosave memory: 00000000000d4000 - 00000000000e0000
    [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
    [ 0.000000] PM: Registered nosave memory: 00000000c727c000 - 00000000c7282000
    [ 0.000000] PM: Registered nosave memory: 00000000c73ec000 - 00000000c740f000
    [ 0.000000] PM: Registered nosave memory: 00000000c746f000 - 00000000c7470000
    [ 0.000000] PM: Registered nosave memory: 00000000c7470000 - 00000000c74f1000
    [ 0.000000] PM: Registered nosave memory: 00000000c74f1000 - 00000000c770f000
    [ 0.000000] PM: Registered nosave memory: 00000000c7718000 - 00000000c771f000
    [ 0.000000] PM: Registered nosave memory: 00000000c7771000 - 00000000c779f000
    [ 0.000000] PM: Registered nosave memory: 00000000c77e2000 - 00000000c77ff000
    [ 0.000000] PM: Registered nosave memory: 00000000c7800000 - 00000000c8000000
    [ 0.000000] PM: Registered nosave memory: 00000000c8000000 - 00000000e0000000
    [ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
    [ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000f1004000
    [ 0.000000] PM: Registered nosave memory: 00000000f1004000 - 00000000f1005000
    [ 0.000000] PM: Registered nosave memory: 00000000f1005000 - 00000000fec00000
    [ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec10000
    [ 0.000000] PM: Registered nosave memory: 00000000fec10000 - 00000000fed00000
    [ 0.000000] PM: Registered nosave memory: 00000000fed00000 - 00000000fed1c000
    [ 0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed90000
    [ 0.000000] PM: Registered nosave memory: 00000000fed90000 - 00000000fee00000
    [ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
    [ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ff000000
    [ 0.000000] PM: Registered nosave memory: 00000000ff000000 - 0000000100000000
    [ 0.000000] e820: [mem 0xc8000000-0xdfffffff] available for PCI devices
    [ 0.000000] Booting paravirtualized kernel on bare hardware
    [ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:8 nr_node_ids:1
    [ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff880237c00000 s84608 r8192 d21888 u262144
    [ 0.000000] pcpu-alloc: s84608 r8192 d21888 u262144 alloc=1*2097152
    [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
    [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2057835
    [ 0.000000] Policy zone: Normal
    [ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=/dev/mapper/cryptpool-cryptroot ro quiet splash cryptdevice=/dev/sda2:cryptvol init=/usr/lib/systemd/systemd radeon.modeset=1 pcie_aspm=force
    [ 0.000000] PCIe ASPM is forcibly enabled
    [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
    [ 0.000000] __ex_table already sorted, skipping sort
    [ 0.000000] Checking aperture...
    [ 0.000000] No AGP bridge found
    [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
    [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
    [ 0.000000] Memory: 8162844k/9306112k available (4727k kernel code, 929340k absent, 213928k reserved, 4143k data, 768k init)
    [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
    [ 0.000000] Preemptible hierarchical RCU implementation.
    [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
    [ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
    [ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=8.
    [ 0.000000] NR_IRQS:4352 nr_irqs:744 16
    [ 0.000000] Extended CMOS year: 2000
    [ 0.000000] Console: colour dummy device 80x25
    [ 0.000000] console [tty0] enabled
    [ 0.000000] allocated 33554432 bytes of page_cgroup
    [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
    [ 0.000000] hpet clockevent registered
    [ 0.000000] tsc: Fast TSC calibration using PIT
    [ 0.003333] tsc: Detected 1596.068 MHz processor
    [ 0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 3193.14 BogoMIPS (lpj=5320226)
    [ 0.000006] pid_max: default: 32768 minimum: 301
    [ 0.000044] Security Framework initialized
    [ 0.000048] AppArmor: AppArmor disabled by boot time parameter
    [ 0.000771] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
    [ 0.003000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
    [ 0.003923] Mount-cache hash table entries: 256
    [ 0.004173] Initializing cgroup subsys cpuacct
    [ 0.004176] Initializing cgroup subsys memory
    [ 0.004184] Initializing cgroup subsys devices
    [ 0.004186] Initializing cgroup subsys freezer
    [ 0.004188] Initializing cgroup subsys net_cls
    [ 0.004189] Initializing cgroup subsys blkio
    [ 0.004216] CPU: Physical Processor ID: 0
    [ 0.004217] CPU: Processor Core ID: 0
    [ 0.004222] mce: CPU supports 9 MCE banks
    [ 0.004234] CPU0: Thermal monitoring enabled (TM1)
    [ 0.004241] process: using mwait in idle threads
    [ 0.004246] Last level iTLB entries: 4KB 512, 2MB 7, 4MB 7
    Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
    tlb_flushall_shift is 0x6
    [ 0.005569] ACPI: Core revision 20120711
    [ 0.021739] ftrace: allocating 18347 entries in 72 pages
    [ 0.034527] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    [ 0.067503] smpboot: CPU0: Intel(R) Core(TM) i7 CPU Q 720 @ 1.60GHz stepping 05
    [ 0.172651] Performance Events: PEBS fmt1+, 16-deep LBR, Nehalem events, Intel PMU driver.
    [ 0.172658] perf_event_intel: CPU erratum AAJ80 worked around
    [ 0.172659] perf_event_intel: CPUID marked event: 'bus cycles' unavailable
    [ 0.172661] ... version: 3
    [ 0.172662] ... bit width: 48
    [ 0.172663] ... generic registers: 4
    [ 0.172665] ... value mask: 0000ffffffffffff
    [ 0.172666] ... max period: 000000007fffffff
    [ 0.172667] ... fixed-purpose events: 3
    [ 0.172669] ... event mask: 000000070000000f
    [ 0.199435] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
    [ 0.212646] smpboot: Booting Node 0, Processors #1 #2 #3 #4 #5 #6 #7 OK
    [ 0.379170] Brought up 8 CPUs
    [ 0.379175] smpboot: Total of 8 processors activated (25547.13 BogoMIPS)
    [ 0.385494] devtmpfs: initialized
    [ 0.387562] PM: Registering ACPI NVS region [mem 0xc7470000-0xc74f0fff] (528384 bytes)
    [ 0.387574] PM: Registering ACPI NVS region [mem 0xc7771000-0xc779efff] (188416 bytes)
    [ 0.388860] NET: Registered protocol family 16
    [ 0.389041] ACPI: bus type pci registered
    [ 0.389136] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
    [ 0.389139] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
    [ 0.432597] PCI: Using configuration type 1 for base access
    [ 0.433425] bio: create slab <bio-0> at 0
    [ 0.433488] ACPI: Added _OSI(Module Device)
    [ 0.433490] ACPI: Added _OSI(Processor Device)
    [ 0.433491] ACPI: Added _OSI(3.0 _SCP Extensions)
    [ 0.433493] ACPI: Added _OSI(Processor Aggregator Device)
    [ 0.435530] ACPI: EC: Look up EC in DSDT
    [ 0.437476] ACPI: Executed 1 blocks of module-level executable AML code
    [ 0.442713] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
    [ 0.443644] ACPI: SSDT 00000000c771aa98 002E8 (v01 PmRef Cpu0Ist 00003000 INTL 20060912)
    [ 0.444142] ACPI: Dynamic OEM Table Load:
    [ 0.444145] ACPI: SSDT (null) 002E8 (v01 PmRef Cpu0Ist 00003000 INTL 20060912)
    [ 0.444332] ACPI: SSDT 00000000c7719018 008B0 (v01 PmRef Cpu0Cst 00003001 INTL 20060912)
    [ 0.444806] ACPI: Dynamic OEM Table Load:
    [ 0.444809] ACPI: SSDT (null) 008B0 (v01 PmRef Cpu0Cst 00003001 INTL 20060912)
    [ 0.445201] ACPI: SSDT 00000000c771a718 00303 (v01 PmRef ApIst 00003000 INTL 20060912)
    [ 0.445749] ACPI: Dynamic OEM Table Load:
    [ 0.445753] ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20060912)
    [ 0.445922] ACPI: SSDT 00000000c7718d98 00119 (v01 PmRef ApCst 00003000 INTL 20060912)
    [ 0.446432] ACPI: Dynamic OEM Table Load:
    [ 0.446435] ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20060912)
    [ 0.448062] ACPI: Interpreter enabled
    [ 0.448066] ACPI: (supports S0 S3 S4 S5)
    [ 0.448089] ACPI: Using IOAPIC for interrupt routing
    [ 0.448593] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
    [ 0.455392] ACPI: Power Resource [FN00] (off)
    [ 0.455494] ACPI: Power Resource [FN01] (off)
    [ 0.456110] ACPI: EC: GPE = 0x16, I/O: command/status = 0x66, data = 0x62
    [ 0.456339] ACPI: No dock devices found.
    [ 0.456343] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
    [ 0.456813] \_SB_.PCI0:_OSC invalid UUID
    [ 0.456815] _OSC request data:1 8 1f
    [ 0.456820] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
    [ 0.457600] PCI host bridge to bus 0000:00
    [ 0.457604] pci_bus 0000:00: busn_res: [bus 00-fe] is inserted under domain [bus 00-ff]
    [ 0.457607] pci_bus 0000:00: root bus resource [bus 00-fe]
    [ 0.457610] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
    [ 0.457612] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
    [ 0.457615] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
    [ 0.457617] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
    [ 0.457619] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
    [ 0.457622] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
    [ 0.457624] pci_bus 0000:00: root bus resource [mem 0xc8000000-0xdfffffff]
    [ 0.457627] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfebfffff]
    [ 0.457638] pci 0000:00:00.0: [8086:d132] type 00 class 0x060000
    [ 0.457700] pci 0000:00:03.0: [8086:d138] type 01 class 0x060400
    [ 0.457759] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
    [ 0.457783] pci 0000:00:08.0: [8086:d155] type 00 class 0x088000
    [ 0.457850] pci 0000:00:08.1: [8086:d156] type 00 class 0x088000
    [ 0.457917] pci 0000:00:08.2: [8086:d157] type 00 class 0x088000
    [ 0.457983] pci 0000:00:08.3: [8086:d158] type 00 class 0x088000
    [ 0.458043] pci 0000:00:10.0: [8086:d150] type 00 class 0x088000
    [ 0.458094] pci 0000:00:10.1: [8086:d151] type 00 class 0x088000
    [ 0.458170] pci 0000:00:1a.0: [8086:3b3c] type 00 class 0x0c0320
    [ 0.458194] pci 0000:00:1a.0: reg 10: [mem 0xf1005800-0xf1005bff]
    [ 0.458289] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
    [ 0.458318] pci 0000:00:1b.0: [8086:3b56] type 00 class 0x040300
    [ 0.458335] pci 0000:00:1b.0: reg 10: [mem 0xf1000000-0xf1003fff 64bit]
    [ 0.458409] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
    [ 0.458432] pci 0000:00:1c.0: [8086:3b42] type 01 class 0x060400
    [ 0.458508] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
    [ 0.458533] pci 0000:00:1c.1: [8086:3b44] type 01 class 0x060400
    [ 0.458609] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
    [ 0.458635] pci 0000:00:1c.3: [8086:3b48] type 01 class 0x060400
    [ 0.458710] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
    [ 0.458735] pci 0000:00:1c.4: [8086:3b4a] type 01 class 0x060400
    [ 0.458810] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
    [ 0.458835] pci 0000:00:1c.5: [8086:3b4c] type 01 class 0x060400
    [ 0.458911] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
    [ 0.458943] pci 0000:00:1d.0: [8086:3b34] type 00 class 0x0c0320
    [ 0.458965] pci 0000:00:1d.0: reg 10: [mem 0xf1005c00-0xf1005fff]
    [ 0.459066] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
    [ 0.459092] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
    [ 0.459161] pci 0000:00:1f.0: [8086:3b03] type 00 class 0x060100
    [ 0.459292] pci 0000:00:1f.2: [8086:3b2f] type 00 class 0x010601
    [ 0.459313] pci 0000:00:1f.2: reg 10: [io 0x1830-0x1837]
    [ 0.459322] pci 0000:00:1f.2: reg 14: [io 0x1824-0x1827]
    [ 0.459331] pci 0000:00:1f.2: reg 18: [io 0x1828-0x182f]
    [ 0.459340] pci 0000:00:1f.2: reg 1c: [io 0x1820-0x1823]
    [ 0.459350] pci 0000:00:1f.2: reg 20: [io 0x1800-0x181f]
    [ 0.459359] pci 0000:00:1f.2: reg 24: [mem 0xf1005000-0xf10057ff]
    [ 0.459410] pci 0000:00:1f.2: PME# supported from D3hot
    [ 0.459430] pci 0000:00:1f.3: [8086:3b30] type 00 class 0x0c0500
    [ 0.459446] pci 0000:00:1f.3: reg 10: [mem 0xf1006000-0xf10060ff 64bit]
    [ 0.459469] pci 0000:00:1f.3: reg 20: [io 0x1840-0x185f]
    [ 0.459533] pci_bus 0000:02: busn_res: [bus 02] is inserted under [bus 00-fe]
    [ 0.459547] pci 0000:02:00.0: [1002:9488] type 00 class 0x030000
    [ 0.459559] pci 0000:02:00.0: reg 10: [mem 0xd0000000-0xdfffffff pref]
    [ 0.459568] pci 0000:02:00.0: reg 14: [io 0x2000-0x20ff]
    [ 0.459577] pci 0000:02:00.0: reg 18: [mem 0xcfef0000-0xcfefffff]
    [ 0.459605] pci 0000:02:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
    [ 0.459642] pci 0000:02:00.0: supports D1 D2
    [ 0.459664] pci 0000:02:00.1: [1002:aa38] type 00 class 0x040300
    [ 0.459676] pci 0000:02:00.1: reg 10: [mem 0xcfeec000-0xcfeeffff]
    [ 0.459749] pci 0000:02:00.1: supports D1 D2
    [ 0.469037] pci 0000:00:03.0: PCI bridge to [bus 02]
    [ 0.469045] pci 0000:00:03.0: bridge window [io 0x2000-0x2fff]
    [ 0.469052] pci 0000:00:03.0: bridge window [mem 0xcfe00000-0xcfefffff]
    [ 0.469061] pci 0000:00:03.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
    [ 0.469117] pci_bus 0000:03: busn_res: [bus 03-04] is inserted under [bus 00-fe]
    [ 0.469121] pci 0000:00:1c.0: PCI bridge to [bus 03-04]
    [ 0.469126] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
    [ 0.469130] pci 0000:00:1c.0: bridge window [mem 0xf0800000-0xf08fffff]
    [ 0.469137] pci 0000:00:1c.0: bridge window [mem 0xf0000000-0xf01fffff 64bit pref]
    [ 0.469179] pci_bus 0000:05: busn_res: [bus 05-06] is inserted under [bus 00-fe]
    [ 0.469247] pci 0000:05:00.0: [8086:4235] type 00 class 0x028000
    [ 0.469385] pci 0000:05:00.0: reg 10: [mem 0xf0900000-0xf0901fff 64bit]
    [ 0.470080] pci 0000:05:00.0: PME# supported from D0 D3hot D3cold
    [ 0.470313] pci 0000:00:1c.1: PCI bridge to [bus 05-06]
    [ 0.470317] pci 0000:00:1c.1: bridge window [io 0x4000-0x4fff]
    [ 0.470322] pci 0000:00:1c.1: bridge window [mem 0xf0900000-0xf09fffff]
    [ 0.470329] pci 0000:00:1c.1: bridge window [mem 0xf0200000-0xf03fffff 64bit pref]
    [ 0.470371] pci_bus 0000:07: busn_res: [bus 07-08] is inserted under [bus 00-fe]
    [ 0.470375] pci 0000:00:1c.3: PCI bridge to [bus 07-08]
    [ 0.470380] pci 0000:00:1c.3: bridge window [io 0x5000-0x5fff]
    [ 0.470384] pci 0000:00:1c.3: bridge window [mem 0xf0a00000-0xf0afffff]
    [ 0.470391] pci 0000:00:1c.3: bridge window [mem 0xf0400000-0xf05fffff 64bit pref]
    [ 0.470433] pci_bus 0000:09: busn_res: [bus 09-0a] is inserted under [bus 00-fe]
    [ 0.470458] pci 0000:09:00.0: [1180:e822] type 00 class 0x080500
    [ 0.470478] pci 0000:09:00.0: reg 10: [mem 0xf0b00000-0xf0b000ff]
    [ 0.470612] pci 0000:09:00.0: supports D1 D2
    [ 0.470614] pci 0000:09:00.0: PME# supported from D0 D1 D2 D3hot D3cold
    [ 0.470664] pci 0000:09:00.1: [1180:e230] type 00 class 0x088000
    [ 0.470683] pci 0000:09:00.1: reg 10: [mem 0xf0c00800-0xf0c008ff]
    [ 0.470817] pci 0000:09:00.1: supports D1 D2
    [ 0.470819] pci 0000:09:00.1: PME# supported from D0 D1 D2 D3hot D3cold
    [ 0.470862] pci 0000:09:00.2: [1180:e852] type 00 class 0x088000
    [ 0.470882] pci 0000:09:00.2: reg 10: [mem 0xf0c00c00-0xf0c00cff]
    [ 0.471016] pci 0000:09:00.2: supports D1 D2
    [ 0.471018] pci 0000:09:00.2: PME# supported from D0 D1 D2 D3hot D3cold
    [ 0.471061] pci 0000:09:00.3: [1180:e832] type 00 class 0x0c0010
    [ 0.471080] pci 0000:09:00.3: reg 10: [mem 0xf0c00000-0xf0c007ff]
    [ 0.471214] pci 0000:09:00.3: supports D1 D2
    [ 0.471216] pci 0000:09:00.3: PME# supported from D0 D1 D2 D3hot D3cold
    [ 0.479052] pci 0000:00:1c.4: PCI bridge to [bus 09-0a]
    [ 0.479060] pci 0000:00:1c.4: bridge window [io 0x6000-0x6fff]
    [ 0.479067] pci 0000:00:1c.4: bridge window [mem 0xf0b00000-0xf0cfffff]
    [ 0.479077] pci 0000:00:1c.4: bridge window [mem 0xf0600000-0xf07fffff 64bit pref]
    [ 0.479131] pci_bus 0000:0b: busn_res: [bus 0b] is inserted under [bus 00-fe]
    [ 0.479319] pci 0000:0b:00.0: [14e4:1698] type 00 class 0x020000
    [ 0.479351] pci 0000:0b:00.0: reg 10: [mem 0xf0d00000-0xf0d0ffff 64bit]
    [ 0.479523] pci 0000:0b:00.0: PME# supported from D3hot D3cold
    [ 0.479582] pci 0000:00:1c.5: PCI bridge to [bus 0b]
    [ 0.479589] pci 0000:00:1c.5: bridge window [mem 0xf0d00000-0xf0dfffff]
    [ 0.479616] pci_bus 0000:0c: busn_res: [bus 0c] is inserted under [bus 00-fe]
    [ 0.479664] pci 0000:00:1e.0: PCI bridge to [bus 0c] (subtractive decode)
    [ 0.479675] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
    [ 0.479677] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
    [ 0.479680] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
    [ 0.479682] pci 0000:00:1e.0: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
    [ 0.479685] pci 0000:00:1e.0: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
    [ 0.479687] pci 0000:00:1e.0: bridge window [mem 0x000dc000-0x000dffff] (subtractive decode)
    [ 0.479690] pci 0000:00:1e.0: bridge window [mem 0xc8000000-0xdfffffff] (subtractive decode)
    [ 0.479692] pci 0000:00:1e.0: bridge window [mem 0xf0000000-0xfebfffff] (subtractive decode)
    [ 0.479724] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    [ 0.479928] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
    [ 0.479968] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
    [ 0.480099] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
    [ 0.480160] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
    [ 0.480223] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
    [ 0.480283] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP05._PRT]
    [ 0.480343] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP06._PRT]
    [ 0.480435] \_SB_.PCI0:_OSC invalid UUID
    [ 0.480437] _OSC request data:1 1f 1f
    [ 0.480441] pci0000:00: ACPI _OSC support notification failed, disabling PCIe ASPM
    [ 0.480443] pci0000:00: Unable to request _OSC control (_OSC support mask: 0x08)
    [ 0.487467] ACPI: PCI Root Bridge [CPBG] (domain 0000 [bus ff])
    [ 0.487507] PCI host bridge to bus 0000:ff
    [ 0.487511] pci_bus 0000:ff: busn_res: [bus ff] is inserted under domain [bus 00-ff]
    [ 0.487513] pci_bus 0000:ff: root bus resource [bus ff]
    [ 0.487521] pci 0000:ff:00.0: [8086:2c52] type 00 class 0x060000
    [ 0.487545] pci 0000:ff:00.1: [8086:2c81] type 00 class 0x060000
    [ 0.487572] pci 0000:ff:02.0: [8086:2c90] type 00 class 0x060000
    [ 0.487594] pci 0000:ff:02.1: [8086:2c91] type 00 class 0x060000
    [ 0.487622] pci 0000:ff:03.0: [8086:2c98] type 00 class 0x060000
    [ 0.487644] pci 0000:ff:03.1: [8086:2c99] type 00 class 0x060000
    [ 0.487667] pci 0000:ff:03.4: [8086:2c9c] type 00 class 0x060000
    [ 0.487691] pci 0000:ff:04.0: [8086:2ca0] type 00 class 0x060000
    [ 0.487714] pci 0000:ff:04.1: [8086:2ca1] type 00 class 0x060000
    [ 0.487736] pci 0000:ff:04.2: [8086:2ca2] type 00 class 0x060000
    [ 0.487758] pci 0000:ff:04.3: [8086:2ca3] type 00 class 0x060000
    [ 0.487783] pci 0000:ff:05.0: [8086:2ca8] type 00 class 0x060000
    [ 0.487807] pci 0000:ff:05.1: [8086:2ca9] type 00 class 0x060000
    [ 0.487829] pci 0000:ff:05.2: [8086:2caa] type 00 class 0x060000
    [ 0.487852] pci 0000:ff:05.3: [8086:2cab] type 00 class 0x060000
    [ 0.487895] pci0000:ff: ACPI _OSC support notification failed, disabling PCIe ASPM
    [ 0.487897] pci0000:ff: Unable to request _OSC control (_OSC support mask: 0x08)
    [ 0.488488] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 *5 6 7 10 12 14 15)
    [ 0.488544] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
    [ 0.488601] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
    [ 0.488655] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
    [ 0.488711] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
    [ 0.488765] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
    [ 0.488819] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 *7 10 12 14 15)
    [ 0.488871] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 *11 12 14 15)
    [ 0.488974] vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=io+mem,locks=none
    [ 0.488983] vgaarb: loaded
    [ 0.488985] vgaarb: bridge control possible 0000:02:00.0
    [ 0.489035] PCI: Using ACPI for IRQ routing
    [ 0.495825] PCI: pci_cache_line_size set to 64 bytes
    [ 0.496142] e820: reserve RAM buffer [mem 0x0009c400-0x0009ffff]
    [ 0.496144] e820: reserve RAM buffer [mem 0xc727c000-0xc7ffffff]
    [ 0.496149] e820: reserve RAM buffer [mem 0xc73ec000-0xc7ffffff]
    [ 0.496152] e820: reserve RAM buffer [mem 0xc746f000-0xc7ffffff]
    [ 0.496156] e820: reserve RAM buffer [mem 0xc7718000-0xc7ffffff]
    [ 0.496159] e820: reserve RAM buffer [mem 0xc7771000-0xc7ffffff]
    [ 0.496161] e820: reserve RAM buffer [mem 0xc77e2000-0xc7ffffff]
    [ 0.496163] e820: reserve RAM buffer [mem 0xc7800000-0xc7ffffff]
    [ 0.496267] NetLabel: Initializing
    [ 0.496269] NetLabel: domain hash size = 128
    [ 0.496270] NetLabel: protocols = UNLABELED CIPSOv4
    [ 0.496283] NetLabel: unlabeled traffic allowed by default
    [ 0.496337] HPET: 8 timers in total, 5 timers will be used for per-cpu timer
    [ 0.496344] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 40, 41, 42, 43, 44, 0
    [ 0.496351] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
    [ 0.499146] hpet: hpet2 irq 40 for MSI
    [ 0.502434] hpet: hpet3 irq 41 for MSI
    [ 0.505694] hpet: hpet4 irq 42 for MSI
    [ 0.505793] hpet: hpet5 irq 43 for MSI
    [ 0.509214] hpet: hpet6 irq 44 for MSI
    [ 0.522618] Switching to clocksource hpet
    [ 0.529334] pnp: PnP ACPI init
    [ 0.529354] ACPI: bus type pnp registered
    [ 0.529782] pnp 00:00: [bus 00-fe]
    [ 0.529786] pnp 00:00: [io 0x0000-0x0cf7 window]
    [ 0.529789] pnp 00:00: [io 0x0cf8-0x0cff]
    [ 0.529791] pnp 00:00: [io 0x0d00-0xffff window]
    [ 0.529794] pnp 00:00: [mem 0x000a0000-0x000bffff window]
    [ 0.529796] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
    [ 0.529799] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
    [ 0.529801] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
    [ 0.529803] pnp 00:00: [mem 0x000cc000-0x000cffff window]
    [ 0.529806] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
    [ 0.529808] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
    [ 0.529811] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
    [ 0.529813] pnp 00:00: [mem 0x000dc000-0x000dffff window]
    [ 0.529815] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
    [ 0.529820] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
    [ 0.529822] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
    [ 0.529825] pnp 00:00: [mem 0x000ec000-0x000effff window]
    [ 0.529827] pnp 00:00: [mem 0x000f0000-0x000fffff window]
    [ 0.529829] pnp 00:00: [mem 0xc8000000-0xdfffffff window]
    [ 0.529832] pnp 00:00: [mem 0xf0000000-0xfebfffff window]
    [ 0.529834] pnp 00:00: [mem 0xfed40000-0xfed44fff window]
    [ 0.529903] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
    [ 0.529952] pnp 00:01: [io 0x0000-0x001f]
    [ 0.529954] pnp 00:01: [io 0x0081-0x0091]
    [ 0.529957] pnp 00:01: [io 0x0093-0x009f]
    [ 0.529959] pnp 00:01: [io 0x00c0-0x00df]
    [ 0.529961] pnp 00:01: [dma 4]
    [ 0.529991] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
    [ 0.530001] pnp 00:02: [mem 0xff000000-0xffffffff]
    [ 0.530030] pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
    [ 0.530116] pnp 00:03: [irq 0 disabled]
    [ 0.530125] pnp 00:03: [irq 8]
    [ 0.530128] pnp 00:03: [mem 0xfed00000-0xfed003ff]
    [ 0.530162] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
    [ 0.530174] pnp 00:04: [io 0x00f0]
    [ 0.530181] pnp 00:04: [irq 13]
    [ 0.530207] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
    [ 0.530221] pnp 00:05: [io 0x002e-0x002f]
    [ 0.530223] pnp 00:05: [io 0x004e-0x004f]
    [ 0.530225] pnp 00:05: [io 0x0061]
    [ 0.530227] pnp 00:05: [io 0x0063]
    [ 0.530229] pnp 00:05: [io 0x0065]
    [ 0.530231] pnp 00:05: [io 0x0067]
    [ 0.530234] pnp 00:05: [io 0x0068]
    [ 0.530236] pnp 00:05: [io 0x006c]
    [ 0.530238] pnp 00:05: [io 0x0070]
    [ 0.530240] pnp 00:05: [io 0x0080]
    [ 0.530242] pnp 00:05: [io 0x0092]
    [ 0.530244] pnp 00:05: [io 0x00b2-0x00b3]
    [ 0.530246] pnp 00:05: [io 0x0680-0x069f]
    [ 0.530249] pnp 00:05: [io 0x0500-0x050f]
    [ 0.530251] pnp 00:05: [io 0xffff]
    [ 0.530253] pnp 00:05: [io 0xffff]
    [ 0.530255] pnp 00:05: [io 0x0400-0x047f]
    [ 0.530257] pnp 00:05: [io 0x1180-0x11ff]
    [ 0.530259] pnp 00:05: [io 0x164e-0x164f]
    [ 0.530262] pnp 00:05: [io 0xfe00]
    [ 0.530330] system 00:05: [io 0x0680-0x069f] has been reserved
    [ 0.530333] system 00:05: [io 0x0500-0x050f] has been reserved
    [ 0.530336] system 00:05: [io 0xffff] has been reserved
    [ 0.530339] system 00:05: [io 0xffff] has been reserved
    [ 0.530342] system 00:05: [io 0x0400-0x047f] has been reserved
    [ 0.530345] system 00:05: [io 0x1180-0x11ff] has been reserved
    [ 0.530347] system 00:05: [io 0x164e-0x164f] has been reserved
    [ 0.530352] system 00:05: [io 0xfe00] has been reserved
    [ 0.530356] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.530374] pnp 00:06: [io 0x0300-0x0307]
    [ 0.530381] pnp 00:06: [irq 10]
    [ 0.530410] pnp 00:06: Plug and Play ACPI device, IDs ITE8708 (active)
    [ 0.530445] pnp 00:07: [io 0x0070-0x0077]
    [ 0.530476] pnp 00:07: Plug and Play ACPI device, IDs PNP0b00 (active)
    [ 0.530488] pnp 00:08: [io 0x0060]
    [ 0.530492] pnp 00:08: [io 0x0064]
    [ 0.530499] pnp 00:08: [irq 1]
    [ 0.530526] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 (active)
    [ 0.530539] pnp 00:09: [irq 12]
    [ 0.530569] pnp 00:09: Plug and Play ACPI device, IDs PNP0f13 (active)
    [ 0.530934] pnp 00:0a: [mem 0xfed1c000-0xfed1ffff]
    [ 0.530937] pnp 00:0a: [mem 0x00000000-0xffffffffffffffff disabled]
    [ 0.530940] pnp 00:0a: [mem 0xfed1b000-0xfed1bfff]
    [ 0.530942] pnp 00:0a: [mem 0x00000000-0xffffffffffffffff disabled]
    [ 0.530944] pnp 00:0a: [mem 0xe0000000-0xefffffff]
    [ 0.530947] pnp 00:0a: [mem 0xf1004000-0xf1004fff]
    [ 0.530949] pnp 00:0a: [mem 0xc8000000-0xc8000fff]
    [ 0.530951] pnp 00:0a: [mem 0xfed20000-0xfed3ffff]
    [ 0.530954] pnp 00:0a: [mem 0xfed90000-0xfed8ffff disabled]
    [ 0.530956] pnp 00:0a: [mem 0xfed40000-0xfed44fff]
    [ 0.530958] pnp 00:0a: [mem 0xfed45000-0xfed8ffff]
    [ 0.530960] pnp 00:0a: [mem 0xff000000-0xffffffff]
    [ 0.530963] pnp 00:0a: [mem 0xfee00000-0xfeefffff]
    [ 0.531049] system 00:0a: [mem 0xfed1c000-0xfed1ffff] has been reserved
    [ 0.531052] system 00:0a: [mem 0xfed1b000-0xfed1bfff] has been reserved
    [ 0.531055] system 00:0a: [mem 0xe0000000-0xefffffff] has been reserved
    [ 0.531058] system 00:0a: [mem 0xf1004000-0xf1004fff] has been reserved
    [ 0.531061] system 00:0a: [mem 0xc8000000-0xc8000fff] has been reserved
    [ 0.531064] system 00:0a: [mem 0xfed20000-0xfed3ffff] has been reserved
    [ 0.531067] system 00:0a: [mem 0xfed40000-0xfed44fff] has been reserved
    [ 0.531070] system 00:0a: [mem 0xfed45000-0xfed8ffff] has been reserved
    [ 0.531072] system 00:0a: [mem 0xff000000-0xffffffff] has been reserved
    [ 0.531075] system 00:0a: [mem 0xfee00000-0xfeefffff] could not be reserved
    [ 0.531080] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.532133] pnp 00:0b: [bus ff]
    [ 0.532197] pnp 00:0b: Plug and Play ACPI device, IDs PNP0a03 (active)
    [ 0.532211] pnp: PnP ACPI: found 12 devices
    [ 0.532212] ACPI: ACPI bus type pnp unregistered
    [ 0.539150] pci 0000:00:1c.5: bridge window [io 0x1000-0x0fff] to [bus 0b] add_size 1000
    [ 0.539155] pci 0000:00:1c.5: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 0b] add_size 200000
    [ 0.539169] pci 0000:00:1c.5: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
    [ 0.539172] pci 0000:00:1c.5: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
    [ 0.539178] pci 0000:00:1c.5: BAR 15: assigned [mem 0xc8100000-0xc82fffff 64bit pref]
    [ 0.539182] pci 0000:00:1c.5: BAR 13: assigned [io 0x7000-0x7fff]
    [ 0.539186] pci 0000:02:00.0: BAR 6: assigned [mem 0xcfe00000-0xcfe1ffff pref]
    [ 0.539190] pci 0000:00:03.0: PCI bridge to [bus 02]
    [ 0.539193] pci 0000:00:03.0: bridge window [io 0x2000-0x2fff]
    [ 0.539198] pci 0000:00:03.0: bridge window [mem 0xcfe00000-0xcfefffff]
    [ 0.539202] pci 0000:00:03.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
    [ 0.539207] pci 0000:00:1c.0: PCI bridge to [bus 03-04]
    [ 0.539211] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
    [ 0.539217] pci 0000:00:1c.0: bridge window [mem 0xf0800000-0xf08fffff]
    [ 0.539221] pci 0000:00:1c.0: bridge window [mem 0xf0000000-0xf01fffff 64bit pref]
    [ 0.539228] pci 0000:00:1c.1: PCI bridge to [bus 05-06]
    [ 0.539232] pci 0000:00:1c.1: bridge window [io 0x4000-0x4fff]
    [ 0.539237] pci 0000:00:1c.1: bridge window [mem 0xf0900000-0xf09fffff]
    [ 0.539241] pci 0000:00:1c.1: bridge window [mem 0xf0200000-0xf03fffff 64bit pref]
    [ 0.539248] pci 0000:00:1c.3: PCI bridge to [bus 07-08]
    [ 0.539252] pci 0000:00:1c.3: bridge window [io 0x5000-0x5fff]
    [ 0.539257] pci 0000:00:1c.3: bridge window [mem 0xf0a00000-0xf0afffff]
    [ 0.539262] pci 0000:00:1c.3: bridge window [mem 0xf0400000-0xf05fffff 64bit pref]
    [ 0.539269] pci 0000:00:1c.4: PCI bridge to [bus 09-0a]
    [ 0.539273] pci 0000:00:1c.4: bridge window [io 0x6000-0x6fff]
    [ 0.539278] pci 0000:00:1c.4: bridge window [mem 0xf0b00000-0xf0cfffff]
    [ 0.539283] pci 0000:00:1c.4: bridge window [mem 0xf0600000-0xf07fffff 64bit pref]
    [ 0.539290] pci 0000:00:1c.5: PCI bridge to [bus 0b]
    [ 0.539293] pci 0000:00:1c.5: bridge window [io 0x7000-0x7fff]
    [ 0.539299] pci 0000:00:1c.5: bridge window [mem 0xf0d00000-0xf0dfffff]
    [ 0.539304] pci 0000:00:1c.5: bridge window [mem 0xc8100000-0xc82fffff 64bit pref]
    [ 0.539310] pci 0000:00:1e.0: PCI bridge to [bus 0c]
    [ 0.539366] pci 0000:00:1e.0: setting latency timer to 64
    [ 0.539371] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
    [ 0.539373] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
    [ 0.539376] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
    [ 0.539378] pci_bus 0000:00: resource 7 [mem 0x000d4000-0x000d7fff]
    [ 0.539381] pci_bus 0000:00: resource 8 [mem 0x000d8000-0x000dbfff]
    [ 0.539383] pci_bus 0000:00: resource 9 [mem 0x000dc000-0x000dffff]
    [ 0.539385] pci_bus 0000:00: resource 10 [mem 0xc8000000-0xdfffffff]
    [ 0.539398] pci_bus 0000:00: resource 11 [mem 0xf0000000-0xfebfffff]
    [ 0.539401] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
    [ 0.539403] pci_bus 0000:02: resource 1 [mem 0xcfe00000-0xcfefffff]
    [ 0.539406] pci_bus 0000:02: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
    [ 0.539408] pci_bus 0000:03: resource 0 [io 0x3000-0x3fff]
    [ 0.539411] pci_bus 0000:03: resource 1 [mem 0xf0800000-0xf08fffff]
    [ 0.539413] pci_bus 0000:03: resource 2 [mem 0xf0000000-0xf01fffff 64bit pref]
    [ 0.539416] pci_bus 0000:05: resource 0 [io 0x4000-0x4fff]
    [ 0.539418] pci_bus 0000:05: resource 1 [mem 0xf0900000-0xf09fffff]
    [ 0.539420] pci_bus 0000:05: resource 2 [mem 0xf0200000-0xf03fffff 64bit pref]
    [ 0.539423] pci_bus 0000:07: resource 0 [io 0x5000-0x5fff]
    [ 0.539425] pci_bus 0000:07: resource 1 [mem 0xf0a00000-0xf0afffff]
    [ 0.539428] pci_bus 0000:07: resource 2 [mem 0xf0400000-0xf05fffff 64bit pref]
    [ 0.539430] pci_bus 0000:09: resource 0 [io 0x6000-0x6fff]
    [ 0.539433] pci_bus 0000:09: resource 1 [mem 0xf0b00000-0xf0cfffff]
    [ 0.539435] pci_bus 0000:09: resource 2 [mem 0xf0600000-0xf07fffff 64bit pref]
    [ 0.539438] pci_bus 0000:0b: resource 0 [io 0x7000-0x7fff]
    [ 0.539440] pci_bus 0000:0b: resource 1 [mem 0xf0d00000-0xf0dfffff]
    [ 0.539443] pci_bus 0000:0b: resource 2 [mem 0xc8100000-0xc82fffff 64bit pref]
    [ 0.539445] pci_bus 0000:0c: resource 4 [io 0x0000-0x0cf7]
    [ 0.539448] pci_bus 0000:0c: resource 5 [io 0x0d00-0xffff]
    [ 0.539450] pci_bus 0000:0c: resource 6 [mem 0x000a0000-0x000bffff]
    [ 0.539452] pci_bus 0000:0c: resource 7 [mem 0x000d4000-0x000d7fff]
    [ 0.539455] pci_bus 0000:0c: resource 8 [mem 0x000d8000-0x000dbfff]
    [ 0.539457] pci_bus 0000:0c: resource 9 [mem 0x000dc000-0x000dffff]
    [ 0.539460] pci_bus 0000:0c: resource 10 [mem 0xc8000000-0xdfffffff]
    [ 0.539462] pci_bus 0000:0c: resource 11 [mem 0xf0000000-0xfebfffff]
    [ 0.539501] NET: Registered protocol family 2
    [ 0.540223] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
    [ 0.543745] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
    [ 0.544173] TCP: Hash tables configured (established 524288 bind 65536)
    [ 0.544194] TCP: reno registered
    [ 0.544208] UDP hash table entries: 4096 (order: 5, 131072 bytes)
    [ 0.544300] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
    [ 0.544454] NET: Registered protocol family 1
    [ 0.544593] pci 0000:02:00.0: Boot video device
    [ 0.544817] PCI: CLS 64 bytes, default 64
    [ 0.544861] Unpacking initramfs...
    [ 0.665886] Freeing initrd memory: 4640k freed
    [ 0.666611] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
    [ 0.666615] software IO TLB [mem 0xc327c000-0xc727bfff] (64MB) mapped at [ffff8800c327c000-ffff8800c727bfff]
    [ 0.666654] Simple Boot Flag at 0x36 set to 0x80
    [ 0.667182] audit: initializing netlink socket (disabled)
    [ 0.667193] type=2000 audit(1352749565.703:1): initialized
    [ 0.683027] HugeTLB registered 2 MB page size, pre-allocated 0 pages
    [ 0.685360] VFS: Disk quotas dquot_6.5.2
    [ 0.685417] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
    [ 0.685575] msgmni has been set to 15952
    [ 0.685799] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
    [ 0.685830] io scheduler noop registered
    [ 0.685832] io scheduler deadline registered
    [ 0.685897] io scheduler cfq registered (default)
    [ 0.686337] vesafb: mode is 1280x1024x32, linelength=5120, pages=0
    [ 0.686339] vesafb: scrolling: redraw
    [ 0.686342] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
    [ 0.687265] vesafb: framebuffer at 0xd0000000, mapped to 0xffffc90011600000, using 5120k, total 5120k
    [ 0.886729] Console: switching to colour frame buffer device 160x64
    [ 1.086123] fb0: VESA VGA frame buffer device
    [ 1.086134] intel_idle: MWAIT substates: 0x1120
    [ 1.086145] intel_idle: v0.4 model 0x1E
    [ 1.086146] intel_idle: lapic_timer_reliable_states 0x2
    [ 1.086221] GHES: HEST is not enabled!
    [ 1.086283] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    [ 1.086787] Linux agpgart interface v0.103
    [ 1.086895] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
    [ 1.097204] serio: i8042 KBD port at 0x60,0x64 irq 1
    [ 1.097237] serio: i8042 AUX port at 0x60,0x64 irq 12
    [ 1.097348] mousedev: PS/2 mouse device common for all mice
    [ 1.097573] rtc_cmos 00:07: RTC can wake from S4
    [ 1.097893] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
    [ 1.097920] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
    [ 1.098264] cpuidle: using governor ladder
    [ 1.098473] cpuidle: using governor menu
    [ 1.098603] drop_monitor: Initializing network drop monitor service
    [ 1.098697] TCP: cubic registered
    [ 1.098819] NET: Registered protocol family 10
    [ 1.099011] NET: Registered protocol family 17
    [ 1.099028] Key type dns_resolver registered
    [ 1.099438] PM: Hibernation image not present or could not be loaded.
    [ 1.099447] registered taskstats version 1
    [ 1.101811] rtc_cmos 00:07: setting system clock to 2012-11-12 19:46:05 UTC (1352749565)
    [ 1.103851] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
    [ 1.106355] Freeing unused kernel memory: 768k freed
    [ 1.106522] Write protecting the kernel read-only data: 8192k
    [ 1.116385] Freeing unused kernel memory: 1408k freed
    [ 1.117994] Freeing unused kernel memory: 568k freed
    [ 1.134497] systemd-udevd[78]: starting version 195
    [ 1.180869] ACPI: bus type usb registered
    [ 1.180984] usbcore: registered new interface driver usbfs
    [ 1.181051] usbcore: registered new interface driver hub
    [ 1.181311] usbcore: registered new device driver usb
    [ 1.182950] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    [ 1.183127] ehci_hcd 0000:00:1a.0: setting latency timer to 64
    [ 1.183132] ehci_hcd 0000:00:1a.0: EHCI Host Controller
    [ 1.183234] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
    [ 1.187253] ehci_hcd 0000:00:1a.0: debug port 2
    [ 1.187271] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
    [ 1.187303] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xf1005800
    [ 1.187791] SCSI subsystem initialized
    [ 1.189604] ACPI: bus type scsi registered
    [ 1.189681] libata version 3.00 loaded.
    [ 1.195488] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
    [ 1.195917] hub 1-0:1.0: USB hub found
    [ 1.195922] hub 1-0:1.0: 3 ports detected
    [ 1.196087] ehci_hcd 0000:00:1d.0: setting latency timer to 64
    [ 1.196092] ehci_hcd 0000:00:1d.0: EHCI Host Controller
    [ 1.196163] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
    [ 1.200176] ehci_hcd 0000:00:1d.0: debug port 2
    [ 1.200188] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
    [ 1.200205] ehci_hcd 0000:00:1d.0: irq 23, io mem 0xf1005c00
    [ 1.208814] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
    [ 1.209225] hub 2-0:1.0: USB hub found
    [ 1.209230] hub 2-0:1.0: 3 ports detected
    [ 1.209367] ahci 0000:00:1f.2: version 3.0
    [ 1.209430] ahci 0000:00:1f.2: irq 45 for MSI/MSI-X
    [ 1.209548] ahci: SSS flag set, parallel bus scan disabled
    [ 1.209587] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 3 Gbps 0x23 impl SATA mode
    [ 1.209592] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ems sxs apst
    [ 1.209597] ahci 0000:00:1f.2: setting latency timer to 64
    [ 1.223416] scsi0 : ahci
    [ 1.223797] scsi1 : ahci
    [ 1.224147] scsi2 : ahci
    [ 1.224500] scsi3 : ahci
    [ 1.224856] scsi4 : ahci
    [ 1.225221] scsi5 : ahci
    [ 1.225356] ata1: SATA max UDMA/133 abar m2048@0xf1005000 port 0xf1005100 irq 45
    [ 1.225362] ata2: SATA max UDMA/133 abar m2048@0xf1005000 port 0xf1005180 irq 45
    [ 1.225365] ata3: DUMMY
    [ 1.225367] ata4: DUMMY
    [ 1.225369] ata5: DUMMY
    [ 1.225373] ata6: SATA max UDMA/133 abar m2048@0xf1005000 port 0xf1005380 irq 45
    [ 1.501934] usb 1-1: new high-speed USB device number 2 using ehci_hcd
    [ 1.545247] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
    [ 1.547533] ata1.00: ATA-8: WDC WD6400BEVT-75A0RT0, 01.01A01, max UDMA/133
    [ 1.547540] ata1.00: 1250263728 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
    [ 1.549967] ata1.00: configured for UDMA/133
    [ 1.550374] scsi 0:0:0:0: Direct-Access ATA WDC WD6400BEVT-7 01.0 PQ: 0 ANSI: 5
    [ 1.626090] hub 1-1:1.0: USB hub found
    [ 1.626247] hub 1-1:1.0: 6 ports detected
    [ 1.668452] tsc: Refined TSC clocksource calibration: 1595.999 MHz
    [ 1.668460] Switching to clocksource tsc
    [ 1.731725] usb 2-1: new high-speed USB device number 2 using ehci_hcd
    [ 1.856178] hub 2-1:1.0: USB hub found
    [ 1.856346] hub 2-1:1.0: 8 ports detected
    [ 1.868319] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    [ 1.880979] ata2.00: ATAPI: TSSTcorp DVD+/-RW TS-T633C, D800, max UDMA/100
    [ 1.880987] ata2.00: applying bridge limits
    [ 1.894279] ata2.00: configured for UDMA/100
    [ 1.895297] scsi 1:0:0:0: CD-ROM TSSTcorp DVD+-RW TS-T633C D800 PQ: 0 ANSI: 5
    [ 1.924926] usb 1-1.4: new high-speed USB device number 3 using ehci_hcd
    [ 2.188109] usb 2-1.1: new low-speed USB device number 3 using ehci_hcd
    [ 2.214657] ata6: SATA link down (SStatus 0 SControl 300)
    [ 2.220297] sd 0:0:0:0: [sda] 1250263728 512-byte logical blocks: (640 GB/596 GiB)
    [ 2.220394] sd 0:0:0:0: [sda] Write Protect is off
    [ 2.220398] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [ 2.220436] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 2.264902] sda: sda1 sda2
    [ 2.266126] sd 0:0:0:0: [sda] Attached SCSI disk
    [ 2.286592] usbcore: registered new interface driver usbhid
    [ 2.286606] usbhid: USB HID core driver
    [ 2.287736] input: Logitech USB Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.0/input/input1
    [ 2.288087] hid-generic 0003:046D:C00B.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB Mouse] on usb-0000:00:1d.0-1.1/input0
    [ 2.344526] usb 2-1.2: new high-speed USB device number 4 using ehci_hcd
    [ 2.415244] device-mapper: uevent: version 1.0.3
    [ 2.415448] device-mapper: ioctl: 4.23.0-ioctl (2012-07-25) initialised: [email protected]
    [ 2.430414] hub 2-1.2:1.0: USB hub found
    [ 2.430750] hub 2-1.2:1.0: 4 ports detected
    [ 2.497819] usb 2-1.6: new full-speed USB device number 5 using ehci_hcd
    [ 2.583779] hub 2-1.6:1.0: USB hub found
    [ 2.583940] hub 2-1.6:1.0: 3 ports detected
    [ 2.697722] usb 2-1.2.1: new high-speed USB device number 6 using ehci_hcd
    [ 2.850856] usb 2-1.6.1: new full-speed USB device number 7 using ehci_hcd
    [ 2.939323] input: HID 413c:8157 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6.1/2-1.6.1:1.0/input/input2
    [ 2.939498] hid-generic 0003:413C:8157.0002: input,hidraw1: USB HID v1.11 Keyboard [HID 413c:8157] on usb-0000:00:1d.0-1.6.1/input0
    [ 3.004105] usb 2-1.6.2: new full-speed USB device number 8 using ehci_hcd
    [ 3.094077] input: HID 413c:8158 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6.2/2-1.6.2:1.0/input/input3
    [ 3.094424] hid-generic 0003:413C:8158.0003: input,hidraw2: USB HID v1.11 Mouse [HID 413c:8158] on usb-0000:00:1d.0-1.6.2/input0
    [ 824.543880] Btrfs loaded
    [ 824.582726] device fsid 02cda685-4334-4137-a111-ffc149f72b91 devid 1 transid 219619 /dev/dm-4
    [ 824.589373] device fsid f90574c8-73b1-4d21-b0f9-c8383e90f702 devid 1 transid 19638 /dev/dm-1
    [ 825.172465] device fsid f90574c8-73b1-4d21-b0f9-c8383e90f702 devid 1 transid 19638 /dev/mapper/cryptpool-cryptroot
    [ 825.228574] btrfs: mismatching generation and generation_v2 found in root item. This root was probably mounted with an older kernel. Resetting all new fields.
    [ 825.236250] btrfs: mismatching generation and generation_v2 found in root item. This root was probably mounted with an older kernel. Resetting all new fields.
    [ 825.497003] btrfs: mismatching generation and generation_v2 found in root item. This root was probably mounted with an older kernel. Resetting all new fields.
    [ 826.881639] systemd[1]: systemd 195 running in system mode. (+PAM -LIBWRAP -AUDIT -SELINUX -IMA -SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ; arch)
    [ 826.913723] systemd[1]: Set hostname to <clawfinger>.
    [ 829.535709] systemd[1]: Cannot add dependency job for unit lvm.service, ignoring: Unit lvm.service failed to load: No such file or directory. See system logs and 'systemctl status lvm.service' for details.
    [ 829.535737] systemd[1]: Cannot add dependency job for unit cpufreq.service, ignoring: Unit cpufreq.service failed to load: No such file or directory. See system logs and 'systemctl status cpufreq.service' for details.
    [ 829.535752] systemd[1]: Cannot add dependency job for unit zeitgeist-daemon.service, ignoring: Unit zeitgeist-daemon.service failed to load: No such file or directory. See system logs and 'systemctl status zeitgeist-daemon.service' for details.
    [ 829.535786] systemd[1]: Cannot add dependency job for unit laptop-mode-tools.service, ignoring: Unit laptop-mode-tools.service failed to load: No such file or directory. See system logs and 'systemctl status laptop-mode-tools.service' for details.
    [ 829.535834] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory. See system logs and 'systemctl status display-manager.service' for details.
    [ 829.535861] systemd[1]: Cannot add dependency job for unit console-kit-daemon.service, ignoring: Unit console-kit-daemon.service failed to load: No such file or directory. See system logs and 'systemctl status console-kit-daemon.service' for details.
    [ 829.536380] systemd[1]: Starting Replay Read-Ahead Data...
    [ 829.554901] systemd[1]: Starting Collect Read-Ahead Data...
    [ 829.571226] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
    [ 829.571303] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
    [ 829.571319] systemd[1]: Starting Login Prompts.
    [ 829.571328] systemd[1]: Reached target Login Prompts.
    [ 829.571337] systemd[1]: Starting Remote File Systems.
    [ 829.571345] systemd[1]: Reached target Remote File Systems.
    [ 829.571354] systemd[1]: Expecting device sys-subsystem-net-devices-eth0.device...
    [ 829.571362] systemd[1]: Starting Syslog Socket.
    [ 829.571364] systemd[1]: Socket service syslog.service not loaded, refusing.
    [ 829.572842] systemd[1]: Failed to listen on Syslog Socket.
    [ 829.574007] systemd[1]: Starting Arch Daemons.
    [ 829.574014] systemd[1]: Reached target Arch Daemons.
    [ 829.574023] systemd[1]: Starting LVM2 metadata daemon socket.
    [ 829.574048] systemd[1]: Listening on LVM2 metadata daemon socket.
    [ 829.574055] systemd[1]: Starting Device-mapper event daemon FIFOs.
    [ 829.574075] systemd[1]: Listening on Device-mapper event daemon FIFOs.
    [ 829.574081] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
    [ 829.574098] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
    [ 829.574106] systemd[1]: Starting Delayed Shutdown Socket.
    [ 829.574129] systemd[1]: Listening on Delayed Shutdown Socket.
    [ 829.574218] systemd[1]: Starting udev Kernel Socket.
    [ 829.574239] systemd[1]: Listening on udev Kernel Socket.
    [ 829.574284] systemd[1]: Starting udev Control Socket.
    [ 829.574307] systemd[1]: Listening on udev Control Socket.
    [ 829.574332] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
    [ 829.574407] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
    [ 829.574419] systemd[1]: Starting Encrypted Volumes.
    [ 829.574426] systemd[1]: Reached target Encrypted Volumes.
    [ 829.574436] systemd[1]: Expecting device dev-disk-by\x2duuid-bb356f76\x2dd262\x2d43ca\x2da705\x2da2eab4b6d6ba.device...
    [ 829.574445] systemd[1]: Expecting device dev-disk-by\x2duuid-2796b7f1\x2d10c6\x2d481b\x2d91cb\x2d07cb7110031c.device...
    [ 829.574455] systemd[1]: Expecting device dev-disk-by\x2duuid-d169a015\x2d6ef6\x2d47f5\x2da6b2\x2d3db25ecce4a2.device...
    [ 829.574467] systemd[1]: Starting Journal Socket.
    [ 829.574507] systemd[1]: Listening on Journal Socket.
    [ 829.574529] systemd[1]: Mounting Huge Pages File System...
    [ 829.577956] systemd[1]: Mounting POSIX Message Queue File System...
    [ 829.591510] systemd[1]: Starting udev Coldplug all Devices...
    [ 829.594776] systemd[1]: Mounting Debug File System...
    [ 829.611201] systemd[1]: Starting udev Kernel Device Manager...
    [ 829.614769] systemd[1]: Starting Journal Service...
    [ 829.647758] systemd[1]: Started Journal Service.
    [ 829.647819] systemd[1]: Starting Syslog.
    [ 829.647843] systemd[1]: Reached target Syslog.
    [ 829.647879] systemd[1]: Starting home.automount.
    [ 829.901808] systemd[1]: Set up automount home.automount.
    [ 830.553864] systemd-udevd[249]: starting version 195
    [ 831.070954] ACPI: Requesting acpi_cpufreq
    [ 831.456015] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input4
    [ 831.456019] ACPI: Power Button [PWRB]
    [ 831.456058] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input5
    [ 831.456060] ACPI: Sleep Button [SLPB]
    [ 831.456097] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input6
    [ 831.457156] ACPI: Lid Switch [LID0]
    [ 831.457203] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input7
    [ 831.457206] ACPI: Power Button [PWRF]
    [ 831.457547] AMD IOMMUv2 driver by Joerg Roedel <[email protected]>
    [ 831.457548] AMD IOMMUv2 functionality not available on this system
    [ 831.615332] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
    [ 831.615336] Disabling lock debugging due to kernel taint
    [ 831.619625] <6>[fglrx] Maximum main memory to use for locked dma buffers: 7745 MBytes.
    [ 831.619972] <6>[fglrx] vendor: 1002 device: 9488 count: 1
    [ 831.620506] <6>[fglrx] ioport: bar 1, base 0x2000, size: 0x100
    [ 831.620722] <6>[fglrx] Kernel PAT support is enabled
    [ 831.620735] <6>[fglrx] module loaded - fglrx 8.97.2 [Jul 4 2012] with 1 minors
    [ 831.621578] ACPI: Fan [FAN0] (off)
    [ 831.621623] ACPI: Fan [FAN1] (off)
    [ 831.631874] vboxdrv: Found 8 processor cores.
    [ 831.633478] vboxdrv: fAsync=0 offMin=0x19b offMax=0x1b771
    [ 831.633549] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
    [ 831.633550] vboxdrv: Successfully loaded version 4.2.4_OSE (interface 0x001a0004).
    [ 832.286066] ACPI: AC Adapter [ADP1] (on-line)
    [ 832.312526] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
    [ 832.315135] acpi device:03: registered as cooling_device10
    [ 832.315214] ACPI: Video Device [M86] (multi-head: yes rom: no post: no)
    [ 832.315347] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/LNXVIDEO:00/input/input8
    [ 832.409308] thermal LNXTHERM:00: registered as thermal_zone0
    [ 832.409312] ACPI: Thermal Zone [TZ00] (27 C)
    [ 832.421895] ACPI: Battery Slot [BAT0] (battery present)
    [ 832.422793] thermal LNXTHERM:01: registered as thermal_zone1
    [ 832.422797] ACPI: Thermal Zone [TZ01] (69 C)
    [ 832.590092] microcode: CPU0 sig=0x106e5, pf=0x10, revision=0x3
    [ 832.970363] input: PC Speaker as /devices/platform/pcspkr/input/input9
    [ 833.240290] microcode: CPU1 sig=0x106e5, pf=0x10, revision=0x3
    [ 833.240762] microcode: CPU2 sig=0x106e5, pf=0x10, revision=0x3
    [ 833.241329] microcode: CPU3 sig=0x106e5, pf=0x10, revision=0x3
    [ 833.241760] microcode: CPU4 sig=0x106e5, pf=0x10, revision=0x3
    [ 833.242173] microcode: CPU5 sig=0x106e5, pf=0x10, revision=0x3
    [ 833.242608] microcode: CPU6 sig=0x106e5, pf=0x10, revision=0x3
    [ 833.243025] microcode: CPU7 sig=0x106e5, pf=0x10, revision=0x3
    [ 833.243492] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
    [ 833.265118] wmi: Mapper loaded
    [ 833.267255] sdhci: Secure Digital Host Controller Interface driver
    [ 833.267258] sdhci: Copyright(c) Pierre Ossman
    [ 833.268312] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PMIO 1 (20120711/utaddress-251)
    [ 833.268319] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 833.268323] ACPI Warning: 0x0000000000001180-0x00000000000011ff SystemIO conflicts with Region \GPIO 1 (20120711/utaddress-251)
    [ 833.268327] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 833.268329] lpc_ich: Resource conflict(s) found affecting gpio_ich
    [ 833.512963] sdhci-pci 0000:09:00.0: SDHCI controller found [1180:e822] (rev 1)
    [ 833.513049] sdhci-pci 0000:09:00.0: Will use DMA mode even though HW doesn't fully claim to support it.
    [ 833.513095] Registered led device: mmc0::
    [ 833.537204] mmc0: SDHCI controller on PCI [0000:09:00.0] using DMA
    [ 833.570607] input: Dell WMI hotkeys as /devices/virtual/input/input10
    [ 833.847354] EDAC MC: Ver: 3.0.0
    [ 833.930269] firewire_ohci 0000:09:00.3: added OHCI v1.10 device as card 0, 4 IR + 4 IT contexts, quirks 0x11
    [ 834.096451] ite_cir: Auto-detected model: ITE8708 CIR transceiver
    [ 834.096454] ite_cir: Using model: ITE8708 CIR transceiver
    [ 834.096455] ite_cir: TX-capable: 1
    [ 834.096456] ite_cir: Sample period (ns): 8680
    [ 834.096457] ite_cir: TX carrier frequency (Hz): 38000
    [ 834.096458] ite_cir: TX duty cycle (%): 33
    [ 834.096459] ite_cir: RX low carrier frequency (Hz): 0
    [ 834.096460] ite_cir: RX high carrier frequency (Hz): 0
    [ 834.275945] iTCO_vendor_support: vendor-support=0
    [ 834.294684] cfg80211: Calling CRDA to update world regulatory domain
    [ 834.301218] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
    [ 834.430008] firewire_core 0000:09:00.3: created device fw0: GUID 324fc0001978e281, S400
    [ 834.433957] ACPI Warning: 0x0000000000001840-0x000000000000185f SystemIO conflicts with Region \_SB_.PCI0.SBUS.SMBI 1 (20120711/utaddress-251)
    [ 834.433962] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 834.446316] EDAC i7core: Device not found: dev 00.0 PCI ID 8086:2c50
    [ 834.977790] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
    [ 834.977796] cdrom: Uniform CD-ROM driver Revision: 3.20
    [ 834.978266] sr 1:0:0:0: Attached scsi CD-ROM sr0
    [ 835.102238] snd_hda_intel 0000:00:1b.0: irq 46 for MSI/MSI-X
    [ 835.137263] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input11
    [ 835.147237] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
    [ 835.147687] hda-intel: 0000:02:00.1: Handle VGA-switcheroo audio client
    [ 835.147810] snd_hda_intel 0000:02:00.1: irq 47 for MSI/MSI-X
    [ 835.152252] Registered IR keymap rc-rc6-mce
    [ 835.152388] input: ITE8708 CIR transceiver as /devices/virtual/rc/rc0/input13
    [ 835.152451] rc0: ITE8708 CIR transceiver as /devices/virtual/rc/rc0
    [ 835.152504] ite_cir: driver has been successfully l

    My disk seems also fine
    === START OF INFORMATION SECTION ===
    Model Family: Western Digital Scorpio Blue Serial ATA
    Device Model: WDC WD6400BEVT-75A0RT0
    Serial Number: WD-WX91C8077575
    LU WWN Device Id: 5 0014ee 600865d25
    Firmware Version: 01.01A01
    User Capacity: 640,135,028,736 bytes [640 GB]
    Sector Size: 512 bytes logical/physical
    Rotation Rate: 5400 rpm
    Device is: In smartctl database [for details use: -P show]
    ATA Version is: ATA8-ACS (minor revision not indicated)
    SATA Version is: SATA 2.6, 3.0 Gb/s
    Local Time is: Thu Dec 20 21:36:56 2012 CET
    SMART support is: Available - device has SMART capability.
    SMART support is: Enabled
    === START OF READ SMART DATA SECTION ===
    SMART overall-health self-assessment test result: PASSED
    General SMART Values:
    Offline data collection status: (0x00) Offline data collection activity
    was never started.
    Auto Offline Data Collection: Disabled.
    Self-test execution status: ( 248) Self-test routine in progress...
    80% of test remaining.
    Total time to complete Offline
    data collection: (16380) seconds.
    Offline data collection
    capabilities: (0x7b) SMART execute Offline immediate.
    Auto Offline data collection on/off support.
    Suspend Offline collection upon new
    command.
    Offline surface scan supported.
    Self-test supported.
    Conveyance Self-test supported.
    Selective Self-test supported.
    SMART capabilities: (0x0003) Saves SMART data before entering
    power-saving mode.
    Supports SMART auto save timer.
    Error logging capability: (0x01) Error logging supported.
    General Purpose Logging supported.
    Short self-test routine
    recommended polling time: ( 2) minutes.
    Extended self-test routine
    recommended polling time: ( 190) minutes.
    Conveyance self-test routine
    recommended polling time: ( 5) minutes.
    SCT capabilities: (0x7037) SCT Status supported.
    SCT Feature Control supported.
    SCT Data Table supported.
    SMART Attributes Data Structure revision number: 16
    Vendor Specific SMART Attributes with Thresholds:
    ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
    1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 0
    3 Spin_Up_Time 0x0027 184 181 021 Pre-fail Always - 1775
    4 Start_Stop_Count 0x0032 079 079 000 Old_age Always - 21418
    5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0
    7 Seek_Error_Rate 0x002e 200 200 000 Old_age Always - 0
    9 Power_On_Hours 0x0032 095 095 000 Old_age Always - 4329
    10 Spin_Retry_Count 0x0032 100 100 000 Old_age Always - 0
    11 Calibration_Retry_Count 0x0032 100 100 000 Old_age Always - 0
    12 Power_Cycle_Count 0x0032 099 099 000 Old_age Always - 1828
    191 G-Sense_Error_Rate 0x0032 001 001 000 Old_age Always - 2336
    192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 512
    193 Load_Cycle_Count 0x0032 161 161 000 Old_age Always - 119448
    194 Temperature_Celsius 0x0022 106 089 000 Old_age Always - 41
    196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0
    197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 0
    198 Offline_Uncorrectable 0x0030 100 253 000 Old_age Offline - 0
    199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0
    200 Multi_Zone_Error_Rate 0x0008 200 200 000 Old_age Offline - 1
    240 Head_Flying_Hours 0x0032 095 095 000 Old_age Always - 4000
    241 Total_LBAs_Written 0x0032 200 200 000 Old_age Always - 13521667898
    242 Total_LBAs_Read 0x0032 200 200 000 Old_age Always - 14814445183
    254 Free_Fall_Sensor 0x0032 200 200 000 Old_age Always - 0
    SMART Error Log Version: 1
    No Errors Logged
    SMART Self-test log structure revision number 1
    Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
    # 1 Short offline Interrupted (host reset) 90% 4329 -
    # 2 Extended offline Completed without error 00% 4329 -
    # 3 Short offline Completed without error 00% 0 -
    SMART Selective self-test log data structure revision number 1
    SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
    1 0 0 Not_testing
    2 0 0 Not_testing
    3 0 0 Not_testing
    4 0 0 Not_testing
    5 0 0 Not_testing
    Selective self-test flags (0x0):
    After scanning selected spans, do NOT read-scan remainder of disk.
    If Selective self-test is pending on power-up, resume after 0 minute delay.

  • Unable to Install Windows 8 on 2011 Mac Mini

    I'm having problems installing Windows 8 on my 2011 Mac Mini.
    Obviously I've gone through the BootCamp Assistant, partitioned my drive and then rebooted and started the Windows 8 install process. I can go through the initial bits Region, entering my product key but when I go to choose the partition where I want to install Windows 8 there is a yellow triangle with the 'Windows cannot be installed to this volume' message when the BOOTCAMP partition is highlighted. When I click more info I get the following pop up messages:
    'Windows cannot be installed to this disk - The selected disk has an MBR Partition table. On EFI systems Windows can only be installed to GPT disks.
    Windows cannot be installed to this disk - This computers hardware may not support booting to this disk. Ensure that the disks controller is enabled in the computers BIOS system.
    Any Ideas as to why I cannot proceed with the install or why Windows 8 is not accepting the prepared partition.
    The installed HDD is a Toshiba MK5065GSXF Revision GV108B (Apple original)
    Regards
    John

    Sounds like you have another device connected which is using GPT/GUID partition and that is stopping you.
    For some it means removing or disconnecting a drive or external device.
    This has existed since Vista days.
    Don't connect USB device until afterwards when you need the drivers, or format the drivers disk not just FAT or exFAT but as Windows partition (in DU under Partitions: Options where you can select GUID or Windows).

  • I upgraded RAM to 16gb in my i7 mid 2011 mac mini and it shuts down at night

    I have a mid 2011 mac mini i7.  Below are the specs on memory, hardware, and solid state.  I also have Yosemite installed - everything is current. version 10.10.2
    I've had 8gb installed since I bought it.  And I just purchased 2 sticks of Crucial RAM 8gbx2.
    Everything is fine but when I go to bed and wake in the morning, the system will not wake-up.  I have fresh batteries in the keyboard and mouse.  The system mini is warm on top - not cold or hot.  So it does not seem asleep.  I have pressed the button on the mac mini once and thought it was alseep...nothing happens.  I just can't get it back up after it seems asleep at night.
    The only way I can get the system going again is pulling the power plug.  This has happened each night since installing the RAM.  Oh, I also have held the power button down for 5 seconds trying to do a hard reset.  Nothing
    I was really excited to get the system up and running with 16gb but hate trouble.  I am not a tech expert....
    I have not changed any settings.  And if it was asleep, why isn't it waking?
    Does anyone have any ideas here?
    Hardware Overview:
      Model Name: Mac mini
      Model Identifier: Macmini5,2
      Processor Name: Intel Core i7
      Processor Speed: 2.7 GHz
      Number of Processors: 1
      Total Number of Cores: 2
      L2 Cache (per Core): 256 KB
      L3 Cache: 4 MB
      Memory: 16 GB
      Boot ROM Version: MM51.0077.B10
      SMC Version (system): 1.75f0
      Serial Number (system): C0*******JD3
      Hardware UUID: *******
    Memory Slots:
      ECC: Disabled
      Upgradeable Memory: Yes
    BANK 0/DIMM0:
      Size: 8 GB
      Type: DDR3
      Speed: 1600 MHz
      Status: OK
      Manufacturer: 0x859B
      Part Number: 0x43543130323436344246313630422E433136
      Serial Number: 0x*****EF6
    BANK 1/DIMM0:
      Size: 8 GB
      Type: DDR3
      Speed: 1600 MHz
      Status: OK
      Manufacturer: 0x859B
      Part Number: 0x43543130323436344246313630422E433136
      Serial Number: 0x*****F0B
    ntel 6 Series Chipset:
      Vendor: Intel
      Product: 6 Series Chipset
      Link Speed: 6 Gigabit
      Negotiated Link Speed: 3 Gigabit
      Physical Interconnect: SATA
      Description: AHCI Version 1.30 Supported
    APPLE SSD TS256C:
      Capacity: 251 GB (251,000,193,024 bytes)
      Model: APPLE SSD TS256C                     
      Revision: CJAA0202
      Serial Number:         41CA40VIK6LK
      Native Command Queuing: No
      Removable Media: No
      Detachable Drive: No
      BSD Name: disk0
      Medium Type: Solid State
      TRIM Support: Yes
      Bay Name: Lower
      Partition Map Type: GPT (GUID Partition Table)
      S.M.A.R.T. status: Verified
      Volumes:
    EFI:
      Capacity: 209.7 MB (209,715,200 bytes)
      BSD Name: disk0s1
      Content: EFI
      Volume UUID: BDC1974F-6B8C-3DAE-9DB2-3AA3C17BF506
    Macintosh HD:
      Capacity: 250.14 GB (250,140,434,432 bytes)
      Available: 86.32 GB (86,323,249,152 bytes)
      Writable: Yes
      File System: Journaled HFS+
      BSD Name: disk0s2
      Mount Point: /
      Content: Apple_HFS
      Volume UUID: A165C2B8-7E7F-3F83-835B-53C6D2695F1B
    Recovery HD:
      Capacity: 650 MB (650,002,432 bytes)
      BSD Name: disk0s3
      Content: Apple_Boot
      Volume UUID: 80D578DD-6F7D-318B-8FCD-B6E653BB72F5
    <Edited By Host>

    Thank you for your help.
    I did both resets you offer in the link above and then I went to bed last night.
    In the morning, when I hit the keyboard, it paused and came to light....and said there was a problem and it automatically reset and re-booted from a blank screen (not main screen).  This was the screen after the reboot.  The full error info is listed below the image.
    Anonymous UUID:       A8BF7A0B-8CBE-1965-232C-ECB1E6FB72EF
    Mon Feb 16 09:40:46 2015
    *** Panic Report ***
    panic(cpu 2 caller 0xffffff8025c1a46e): Kernel trap at 0xffffff8026138ebb, type 14=page fault, registers:
    CR0: 0x000000008001003b, CR2: 0x0000000000000890, CR3: 0x0000000008f59010, CR4: 0x00000000000626e0
    RAX: 0x0000000000000004, RBX: 0x0000000000000000, RCX: 0x0000000000000000, RDX: 0xffffff80441dc000
    RSP: 0xffffff82105a3df0, RBP: 0xffffff82105a3e20, RSI: 0xffffff804581aa50, RDI: 0xffffff82105a3f30
    R8:  0x0000000000000032, R9:  0x0000000000000001, R10: 0x0000000000000000, R11: 0x000003571b6dfe80
    R12: 0x0000000000000001, R13: 0x0000000000000000, R14: 0x0000000000000001, R15: 0xffffff804581aa50
    RFL: 0x0000000000010286, RIP: 0xffffff8026138ebb, CS:  0x0000000000000008, SS:  0x0000000000000000
    Fault CR2: 0x0000000000000890, Error code: 0x0000000000000000, Fault CPU: 0x2
    Backtrace (CPU 2), Frame : Return Address
    0xffffff82105a3aa0 : 0xffffff8025b2fe41
    0xffffff82105a3b20 : 0xffffff8025c1a46e
    0xffffff82105a3ce0 : 0xffffff8025c36683
    0xffffff82105a3d00 : 0xffffff8026138ebb
    0xffffff82105a3e20 : 0xffffff8025d6595f
    0xffffff82105a3e60 : 0xffffff8025fedcb9
    0xffffff82105a3f70 : 0xffffff8025fdba9e
    0xffffff82105a3fb0 : 0xffffff8025c14dd7
    BSD process name corresponding to current thread: syslogd
    Mac OS version:
    14C109
    Kernel version:
    Darwin Kernel Version 14.1.0: Mon Dec 22 23:10:38 PST 2014; root:xnu-2782.10.72~2/RELEASE_X86_64
    Kernel UUID: DCF5C2D5-16AE-37F5-B2BE-ED127048DFF5
    Kernel slide:     0x0000000025800000
    Kernel text base: 0xffffff8025a00000
    __HIB  text base: 0xffffff8025900000
    System model name: Macmini5,2 (Mac-4BC72D62AD45599E)
    System uptime in nanoseconds: 3672658333040
    last loaded kext at 246104407160: com.apple.filesystems.msdosfs 1.10 (addr 0xffffff7fa8dea000, size 69632)
    last unloaded kext at 306370508014: com.apple.filesystems.msdosfs 1.10 (addr 0xffffff7fa8dea000, size 61440)
    loaded kexts:
    com.apple.driver.AppleBluetoothMultitouch 85.3
    com.apple.driver.AudioAUUC 1.70
    com.apple.filesystems.autofs 3.0
    com.apple.driver.AppleHWSensor 1.9.5d0
    com.apple.driver.AGPM 100.15.5
    com.apple.driver.ApplePlatformEnabler 2.1.7d1
    com.apple.iokit.IOBluetoothSerialManager 4.3.2f6
    com.apple.driver.AppleOSXWatchdog 1
    com.apple.driver.AppleMikeyHIDDriver 124
    com.apple.driver.AppleHDA 269.25
    com.apple.driver.AppleMikeyDriver 269.25
    com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport 4.3.2f6
    com.apple.driver.ACPI_SMC_PlatformPlugin 1.0.0
    com.apple.driver.AppleLPC 1.7.3
    com.apple.iokit.IOUserEthernet 1.0.1
    com.apple.Dont_Steal_Mac_OS_X 7.0.0
    com.apple.driver.AppleHWAccess 1
    com.apple.driver.AppleHV 1
    com.apple.driver.AppleThunderboltIP 2.0.2
    com.apple.driver.AppleUpstreamUserClient 3.6.1
    com.apple.driver.AppleMCCSControl 1.2.11
    com.apple.kext.AMDFramebuffer 1.3.0
    com.apple.AMDRadeonX3000 1.3.0
    com.apple.kext.AMD6000Controller 1.3.0
    com.apple.driver.AppleIntelHD3000Graphics 10.0.0
    com.apple.driver.AppleIntelSNBGraphicsFB 10.0.0
    com.apple.driver.AppleSMCPDRC 1.0.0
    com.apple.driver.AppleIRController 327.5
    com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
    com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
    com.apple.BootCache 35
    com.apple.driver.XsanFilter 404
    com.apple.driver.AppleFWOHCI 5.5.2
    com.apple.iokit.IOAHCIBlockStorage 2.7.0
    com.apple.driver.AppleSDXC 1.6.5
    com.apple.driver.AppleUSBHub 705.4.2
    com.apple.iokit.AppleBCM5701Ethernet 10.1.3
    com.apple.driver.AirPort.Brcm4331 800.20.24
    com.apple.driver.AppleUSBEHCI 705.4.14
    com.apple.driver.AppleAHCIPort 3.1.0
    com.apple.driver.AppleRTC 2.0
    com.apple.driver.AppleACPIButtons 3.1
    com.apple.driver.AppleHPET 1.8
    com.apple.driver.AppleSMBIOS 2.1
    com.apple.driver.AppleACPIEC 3.1
    com.apple.driver.AppleAPIC 1.7
    com.apple.driver.AppleIntelCPUPowerManagementClient 218.0.0
    com.apple.nke.applicationfirewall 161
    com.apple.security.quarantine 3
    com.apple.security.TMSafetyNet 8
    com.apple.driver.AppleIntelCPUPowerManagement 218.0.0
    com.apple.driver.AppleMultitouchDriver 262.33.1
    com.apple.driver.AppleBluetoothHIDKeyboard 176.2
    com.apple.driver.IOBluetoothHIDDriver 4.3.2f6
    com.apple.driver.AppleHIDKeyboard 176.2
    com.apple.kext.triggers 1.0
    com.apple.iokit.IOSerialFamily 11
    com.apple.driver.DspFuncLib 269.25
    com.apple.kext.OSvKernDSPLib 1.15
    com.apple.iokit.IOBluetoothHostControllerUSBTransport 4.3.2f6
    com.apple.driver.IOPlatformPluginLegacy 1.0.0
    com.apple.driver.AppleSMBusPCI 1.0.12d1
    com.apple.driver.AppleHDAController 269.25
    com.apple.iokit.IOHDAFamily 269.25
    com.apple.iokit.IOAudioFamily 203.3
    com.apple.vecLib.kext 1.2.0
    com.apple.iokit.IOSurface 97
    com.apple.iokit.IOBluetoothFamily 4.3.2f6
    com.apple.driver.AppleSMBusController 1.0.13d1
    com.apple.iokit.IOAcceleratorFamily2 156.6
    com.apple.kext.AMDSupport 1.3.0
    com.apple.AppleGraphicsDeviceControl 3.8.6
    com.apple.iokit.IONDRVSupport 2.4.1
    com.apple.iokit.IOGraphicsFamily 2.4.1
    com.apple.driver.IOPlatformPluginFamily 5.8.1d38
    com.apple.iokit.IOUSBUserClient 705.4.0
    com.apple.iokit.IOFireWireIP 2.2.6
    com.apple.driver.AppleSMC 3.1.9
    com.apple.iokit.IOSCSIArchitectureModelFamily 3.7.3
    com.apple.driver.AppleUSBMergeNub 705.4.0
    com.apple.iokit.IOUSBHIDDriver 705.4.0
    com.apple.driver.AppleUSBComposite 705.4.9
    com.apple.driver.AppleThunderboltDPInAdapter 4.0.6
    com.apple.driver.AppleThunderboltDPOutAdapter 4.0.6
    com.apple.driver.AppleThunderboltDPAdapterFamily 4.0.6
    com.apple.driver.AppleThunderboltPCIDownAdapter 2.0.2
    com.apple.driver.AppleThunderboltNHI 3.1.7
    com.apple.iokit.IOThunderboltFamily 4.2.1
    com.apple.iokit.IOFireWireFamily 4.5.6
    com.apple.iokit.IOEthernetAVBController 1.0.3b3
    com.apple.iokit.IO80211Family 710.55
    com.apple.driver.mDNSOffloadUserClient 1.0.1b8
    com.apple.iokit.IONetworkingFamily 3.2
    com.apple.iokit.IOUSBFamily 710.4.14
    com.apple.iokit.IOAHCIFamily 2.7.5
    com.apple.driver.AppleEFINVRAM 2.0
    com.apple.driver.AppleEFIRuntime 2.0
    com.apple.iokit.IOHIDFamily 2.0.0
    com.apple.iokit.IOSMBusFamily 1.1
    com.apple.security.sandbox 300.0
    com.apple.kext.AppleMatch 1.0.0d1
    com.apple.driver.AppleKeyStore 2
    com.apple.driver.AppleMobileFileIntegrity 1.0.5
    com.apple.driver.AppleCredentialManager 1.0
    com.apple.driver.DiskImages 396
    com.apple.iokit.IOStorageFamily 2.0
    com.apple.iokit.IOReportFamily 31
    com.apple.driver.AppleFDEKeyStore 28.30
    com.apple.driver.AppleACPIPlatform 3.1
    com.apple.iokit.IOPCIFamily 2.9
    com.apple.iokit.IOACPIFamily 1.4
    com.apple.kec.corecrypto 1.0
    com.apple.kec.Libm 1
    com.apple.kec.pthread 1
    Model: Macmini5,2, BootROM MM51.0077.B10, 2 processors, Intel Core i7, 2.7 GHz, 16 GB, SMC 1.75f0
    Graphics: AMD Radeon HD 6630M, AMD Radeon HD 6630M, PCIe, 256 MB
    Memory Module: BANK 0/DIMM0, 8 GB, DDR3, 1600 MHz, 0x859B, 0x43543130323436344246313630422E433136
    Memory Module: BANK 1/DIMM0, 8 GB, DDR3, 1600 MHz, 0x859B, 0x43543130323436344246313630422E433136
    AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0xE4), Broadcom BCM43xx 1.0 (5.106.98.100.24)
    Bluetooth: Version 4.3.2f6 15235, 3 services, 27 devices, 1 incoming serial ports
    Network Service: Wi-Fi, AirPort, en1
    Serial ATA Device: APPLE SSD TS256C, 251 GB
    USB Device: Hub
    USB Device: BRCM20702 Hub
    USB Device: Bluetooth USB Host Controller
    USB Device: Hub
    USB Device: IR Receiver
    Thunderbolt Bus: Mac mini, Apple Inc., 22.2

  • My 2011 mac mini screen is black and has an "out of range" message

    My 2011 mac mini is hooked up to a monitor and it has a black screen with an "out of range" message. I'm not sure how to fix it. everything is plugged in. please help!

    Reset the PRAM > Resetting your Mac's PRAM and NVRAM
    1. Shut down the computer.
    2. Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
    3. Turn on the computer.
    4. Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
    5. Hold the keys down until the computer restarts and you hear the startup sound for the second time.
    6. Release the keys.

  • Delay time putting Mac Mini to sleep manually

    I am using an early 2011 Mac Mini running OS 10.6.7, which I have had for a little over a year. A new problem cropped up in the past week. When I put it to sleep manually it takes 2 minutes or more before it actually goes to sleep. I have "wake for network access turned off." The computer goes to sleep automatically at the time set in energy saver without a problem. The manual sleep delay happens whether or not I have applications running or not. What goes?

    Sounds like your iMac might have an unfinished task running in the background.
    Not sure if > Mac OS X: Why your Mac might not sleep or stay in sleep mode helps or not, but it is worth a once over to see if anything pops.
    Another place to check is "Applications / Utilities / Console / All Messages"

  • Will reinstalling Yosemite on Late 2011 Mac Mini iCore5 4GB DDR3 help improve performance?

    I have a late 2011 Mac Mini with icore5 and DDR3 4GB RAM.
    To me performance was extremely good with Lion and Mountain Lion. I did love Lion though.
    Mavericks improved the performance I did miss on Mountain Lion. But with Yosemite I feel I made a blunder.
    My machine doesn't have the capacity to do App Nap effectively, or may be absent.
    What happens most of the time is that Safari works extremely fast however all of my system apps behave bizzardly slow.
    I thought it could be after initial install and waited for nearly 3 months for the OS to speedup on its own but it lags terribly.
    I dont have problems playing iTunes, Safari, facetime and other live meeting apps.
    I suspected my harddrive and tested it but that was working fine.
    I now only think of reinstalling the OS believing it would speed up. Or should I do a clean install please let me know.

    Activity Monitor - Mavericks  also Yosemite
    Activity Monitor in Mavericks has significant changes
    Performance Guide
    Why is my computer slow
    Why your Mac runs slower than it should
    Slow Mac After Mavericks
    Things you can do to resolve slowdowns  see post by Kappy
    Try running this program and then copy and paste the output in a reply. The program was created by Etresoft, a frequent contributor.  Please use copy and paste as screen shots can be hard to read.
    Etrecheck – System Information

  • Problems on 2011 Mac Mini....Help Needed Please!

    Hi,
    I have an entry level 2011 Mac Mini (base model but with 8gb ram installed), I bought it in early August.
    It has just started being very unresponsive, crashing, locking up, multi-coloured timer, finder crashing.
    I have a magic trackpad/wireless keyboard and the following peripherals connected.
    A 2tb Samsung USB HDD Drive
    A Sony BD Writer (USB)
    An Arcam rDac (Digital to Analogue converter) USB also
    I also have 2 x 2 TB WD NAS drives connected via a HP Procurve Gigabit Switch.
    I use the Mac for iTunes (via Pure Music) with the Arcam rDac (connected in turn to my hi-fi)
    I also have Plex installed and Make MKV and am ripping BD's to the Mac Mini's internal HDD and copying them over the Samsung/NAS. Every now and again I get error -50, error -8076, and error -36
    That's it, I use nothing else on the Mac, not even Safari or email.
    It is connected to a 60 inch Pioneer plasma via HDMI, I also have an iPad 1 which I use for the Remote app for itunes and also have Remoter VNC installed.
    I have the Mac (and PS3 a Sky HD box) connected to an HDMI switch then on to the Plasma, the Mac has started being twitchy with regard to handshake, sometimes it is flawless, other times I get a snowy screen and it can take up to a minute or to connect. The other devices connected always work perfectly, and trying another cable or input into the switch makes no difference.
    Everything valuable is backed up, shall I Shift+R and reinstall Lion, or is there something else I need to do?
    Sorry for the all of the questions
    Thanks
    David

    Sorry I should have said when moving files around I meant larger files.
    USB sticks seem absolutely fine.
    anything over say 5GB COULD be a problem.
    Sometimes Finder (and the Mac) just locks up (can't move mouse pointer or anything) whilst in the process of moving of file. Sometimes I get an error code (8076, 30 & 50 spring to mid).
    I've had this moving both the USB drive (2tb) and the NAS.

Maybe you are looking for

  • Does anyone know why music from my itunes syncs with my ipad mini but not my iphone 4?

    I've repeatedly tried to sync a few playlists from my itunes to my iphone 4 but it wont work. I've successfully synced the same playlists to my ipad mini so why won't it do it for my iphone? Are there settings i've missed out? Thank you

  • Processor and Core Count on AMD Opteron Servers

    hi I have a couple of HP DL385 G7 servers, which are dual processor 8 core servers, running Windows 2008 R2. These servers are reporting 16 CPUs each with 8 cores. The processors are AMD Opteron(tm) Processor 6136. Anyone know how to get this to repo

  • Mavericks Server Calendar and Contacts  services won't start.

    Recently the calendar and contacts services stopped working.  Client computers started getting errors like this: "The server responded with an error https://[some UID and a lot of other info]... is not a location that supports this request." It was s

  • How to make qry fast

    I have a small query select * from x order by b asc its very slow how can i make it fast as i have to order .

  • Photo and imaging

    I had a photo program from HP on my computer which I lost when I upgraded from XP to Windows 7.  IS it possible to download it again from HP?