Long distance from exchange

Hi. currently live about 9 miles from main exchange have been told to far to get any broadband. A bt inifinity (green Box) is about 3.5miles from me, does any one know how far infinity can go or if the distance will expand.
   Or will this boost bt total broadband in my area. Or is there any equipment that can be used to boost any signals to my house.
Yes I'm despreat to get any kind of broadband on my phone line.
Thanks for any help

I just would not bother any one cause you just are not going to get it
The national target is to provide every one in the UK with 512K and that seems impossible
If any post helps tick the star box on the left
Just cause Im paranoid dont mean they are not out to get me

Similar Messages

  • Switched long distance from At&t to verizon in February still no long distance capabilites, WHY?

    Switched long distance from At&t to verizon in February still no long distance capabilites, WHY? I have made numerous calls in the last few months and still am not able to make a long distance call. Do I need to switch back to AT&T. I have been using Skype but doesn't Verizon want the business?

    Some verizon people do look here but this forum is mostly for user to user help.
    Try "contact us" http://www.verizon.com/contactus

  • Distance from exchange

    Hi all,
    First post on here, and I have been driven to venting my frustrations in the hope that someone higher up the BT chain might take notice. I have been with BT for years now but unfortunately for me I am in the forces and live on airfields in the middle of the countryside. The place where I have been living for the past 3 years is right at the limit from the exchange that provides my service. My question is this, BT know I live a long way from the exchange as I have spoken to them on numerous occasions regarding my speed and trying to find out when the lines will be improved, and they also know that I am getting a much reduced service to that of someone who lives in the village or town centre, so therefore why am I paying the exact same amount!!. I am currently on 1/2 Mbs line and can normally download at a whopping 3.0Kbs!! I could get faster than that when I used to use dial up. I feel like smashing my computer up sometimes when I'm trying to download a file and its going to take 22hrs when my brother is on the same package as me paying the same amount and is on an 8MB line!! I think they need to take a look at their billing criteria and if they know a customer will get reduced service then they should offer a reduced cost! Anyway I feel a bit better now hopefully the right people will read this as I'm %100 sure I'm not the only person experiencing this!!

    Like many here, I sympathise greatly with your situation - many of us have exactly the same problems and think that the situation is iniquitous.  However, until there is a major shake up of the way broadband services are sold in the UK by all ISPs -nothing much is going to happen.
    The bottom line, however unpalatable an unfair it might be, is that BT market an "Upto X Mbps" service.  If you get X Mbps, great.  If you get a fraction of that, tough luck. its still within the terms of the contract.
    Ain't life great!
    "To forbid us anything is to make us have a mind for it."
    -- Michel de Montaigne, Essays, 1559

  • This may sound silly but can anyone tell me if facetime is done through wifii or is it charged as a long distance from canada to us

    this may sound silly but can anywone tell be if facetime is wifi or a long distance charge?

    FaceTime is NEVER charged. It is basically going through the internet, as if you were watching a YouTube video, it just takes data. You probably have a data limit through your wireless provider, for example, I can only use 3Gb of data per month on my iPhone 5 through AT&T.
    If you use Wi-Fi, you will NOT be charged for data (unless your internet provider has a cap on the amount of data you can use).
    If you do facetime over cellular data, you just have to watch your data usage. You can watch your data usage in Settings > General > Usage. AT&T, Verizon, and Sprint all offer free apps you can use to monitor your data usage (among many other things, like pay your wireless bill, etc.).

  • Exchange 2013 - can no longer move mailboxes from Exchange 2010 to Ex 2013.

    Migrating to Exchange 2013 from Exchange 2010. Created Ex 2013, moved some mailboxes OK. Then could no longer move mailboxes. No errors. The Migration email says complete. Synced: none, Total Mailboxes: none.
    Tried several mailboxes. Same result.
    Ex 2010 is SP3 RU6, (at least it says RU6 is installed in Programs/Features. The build is for SP3 w/o RU6???)
    Ex 2013 is SP1 aka CU4.
    How to proceed???
    john11

    After many attempts to fix the issue (move remaining 4 mailboxes from Exchange 2010 to Exchange 2013) I contacted Microsoft and we resolved the issue. Here's how.
    btw - Thanks for the suggestions from Ed. However, they did not seem to move us forward.
    What did work:
    1. On the Exchange 2010 box, create a new database. (Someone else suggested this also). Then move the remaining Exchange 2010 mailboxes to this new db. Then after that, move the 4 mailboxes to Exchange 2013 using the GUI on Ex 2013. This only worked for one
    of the four mailboxes. The other 3 failed.
    2. Apparently, we need to restart the Microsoft Exchange Mailbox Replication service on the Exchange 2013 after several failed move attempts to clear cache related to the moves.
    3. Then on the Exchange 2013 box, use this Exchange shell command:
    New-MoveRequest -identity "[email protected]" -TargetDatabase "Exchange 2013 DB name" -BadItemLimit '500' -verbose
    This moved the remaining 3 mailboxes including the Discovery mailbox. It took some time. But we could check the progress using
    Get-MoveRequest
    The MS Tech was terrific. Really knew his stuff. And all mailboxes are on Exchange 2013. Well, the last one is still moving, but I am optimistic.
    Thanks for the suggestions. I had to get this done and the MS Tech made that happen. 
    john11

  • Cannot make long distance calls when dialing from BB address book

    Hello, 
    1) If use a number from my address book, example 1-604-824-2021, to call long distance I get a message "all long distance calls must include the area code.  Please check the number and dial again."   If I use the telephone pad to call the exact same number, eg 1-604-82402021, the call goes through.  Is there a setting to adjust?  Please advise.  Thank you.
    2) I synched my BB to Outlook 2007 on my pc in order to print a hardcopy of my contact list.  The sync worked fine but only gave me the contacts with an email address and their name.  Contacts on my BB without email addresses didn't show on the list and all details, addresses, birthdates, and most importantly phone numbers for any contacts didn't show up.  Is there a way to get ALL the contact details on a hardcopy?  Thank you.
    The folks at Telus can't help because they apparently don't know BB products well enough.  I'm not about to pay BB technical to tell me how to use their product but i might take the service providers advise to buy an iPhone.  Can someone offer advise to solve these two seemingly simple issues
    Thanks again.
    Ralph
    Solved!
    Go to Solution.

    Hi and Welcome to the Community!
    ralphhr wrote:
    1) If use a number from my address book, example 1-604-824-2021, to call long distance I get a message "all long distance calls must include the area code.  Please check the number and dial again."   If I use the telephone pad to call the exact same number, eg 1-604-82402021, the call goes through.  Is there a setting to adjust?  Please advise.  Thank you.
    Please check your Smart Dialing settings...it may be that they are active, which could make the "1" in your Contact Item extraneous.
    KB20595 How to turn off the Smart Dialing feature
    ralphhr wrote:
    2) I synched my BB to Outlook 2007 on my pc in order to print a hardcopy of my contact list.  The sync worked fine but only gave me the contacts with an email address and their name.  Contacts on my BB without email addresses didn't show on the list and all details, addresses, birthdates, and most importantly phone numbers for any contacts didn't show up.  Is there a way to get ALL the contact details on a hardcopy?  Thank you.
    Interesting...it should sync everything...hmmm... Well, if your only interest is a hard copy, then an export might be just as simple. The Desktop Software can export to a CSV, which you could then render in Excel, and do with as you please. Unfortunately, the export feature was removed in the most recent versions of the Desktop Software (don't ask...it's a HUGE bru-ha-ha!!), and you must use an older version (6.x or lower, as I recall) to do that:
    http://www.blackberryos.com/downloads.php?do=cat&id=110
    Good luck!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Since upgrade from Exchange 2007 to Exchange 2013 the conversations in Outlook do not group by subject

    Hi Microsoft,
    Since we have upgraded from Exchange 2007 to 2013 users complain their conversations in Outlook are no longer grouped based on the subject of an e-mail. I looks like Outlook uses other message properties for grouping e-mails in a conversation.
    I have investigated all the forum topics and see that with exchange 2010 there is support added for the use of conversation-ID's. However the functionality to automatically group e-mails with the same subject in one conversation in Outlook is gone!
    I would like to know if there is a fix to implement so that some our users get this functionality back. For Example: Let the exchange server not generate conversation-ID's and message-ID's for certain users.
    Your help is greatly appreciated!

    Totally correct!
    If you don't plan to maintain Outlook then you plan to fail :( 
    Additional links etc are in here:
    http://blogs.technet.com/b/rmilne/archive/2013/07/18/patching-exchange-don-t-overlook-outlook.aspx 
    Cheers,
    Rhoderick
    Microsoft Senior Exchange PFE
    Blog:
    http://blogs.technet.com/rmilne 
    Twitter:   LinkedIn:
      Facebook:
      XING:
    Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose.

  • Public Folder Migration from Exchange 2007 to 2013

    Hi Guys,
    I have a general Exchange 07-13 migration question about migrating the PF's and System Folder Information, I read somewhere that the SystemFolder info doesn't come across, can someone shed some light on this for me please?
    Thanks,
    Ray

    Hi Ray,
    Free/Busy information is stored in system public folder. If you want to decommission the Exchange 2007 Server, you need to add the replicas to Exchange 2013 Server.
    What's more, if the users use Outlook 2003, they will rely on the Free/Busy folders. If the users are using Outlook 2007 or newer, then Outlook utilizes something called the Availability Service and no longer relies on the Free/Busy folder.
    Please refer to the following article to migrate public folders from Exchange 2007 to Exchange 2013.
    Migrate Public Folders to Exchange 2013 From Previous Versions
    http://technet.microsoft.com/en-us/library/jj150486.aspx
    Besides, here is a helpful thread for your reference.
    move/migrate Public Folder from Exchange 2007 to Exchange 2010
    http://social.technet.microsoft.com/Forums/exchange/en-US/44b29a93-0149-4734-8e19-6679ad7701ce/movemigrate-public-folder-from-exchange-2007-to-exchange-2010?forum=exchange2010
    Hope it helps.
    If there are any problems, please feel free to let me know.
    Best regards,
    Amy
    Amy Wang
    TechNet Community Support

  • Migration from Exchange 2007 to 2013 gives error "Failed to communicate with the mailbox database'

    I have been trying to migrate several databases from Exchange 2007 to Exchange 2013. The migration started successfully, and many of the mailboxes moved successfully (about 70). The remaining mailboxes, failed. Looking deeper, we found a few issues; The
    two 2013 Mailbox servers were on different versions. The Server had run out of disk space, and the NIC drivers needed to be updated.
    Now when we try to migrate a mailbox that had failed in the earlier batch, we get the following error:
    Data migrated:                        
    Migration rate:                        
    Error:                        
    MigrationTransientException: Failed to communicate with the mailbox database. --> Failed to communicate with the mailbox database. --> MapiExceptionNetworkError: Unable to make connection to the server. ‎(hr=0x80040115, ec=-2147221227)‎ Diagnostic
    context:    ......    Lid: 9624    dwParam: 0x0 Msg: EEInfo: Detection location: 501    Lid: 13720   dwParam: 0x0 Msg: EEInfo: Flags: 0    Lid: 11672   dwParam:
    0x0 Msg: EEInfo: NumberOfParameters: 4    Lid: 8856    dwParam: 0x0 Msg: EEInfo: prm[0]: Unicode  string: ncacn_ip_tcp    Lid: 8856    dwParam: 0x0 Msg: EEInfo: prm[1]: Unicode  string: <Server
    FQDN>    Lid: 12952   dwParam: 0x0 Msg: EEInfo: prm[2]: Long val: 3749909585    Lid: 12952   dwParam: 0x0 Msg: EEInfo: prm[3]: Long val: 382312662    Lid: 45169   StoreEc: 0x824        
    Lid: 50544   ClientVersion: 15.0.847.32    Lid: 52080   StoreEc: 0x824         Lid: 44273      Lid: 49064   dwParam: 0x1    Lid: 37288  
    StoreEc: 0x6AB         Lid: 49064   dwParam: 0x2    Lid: 59431   EMSMDB.EcDoConnectEx called [length=203]    Lid: 51239   EMSMDB.EcDoConnectEx exception [rpc_status=0x6D9][latency=0]   
    Lid: 62184      Lid: 16280   dwParam: 0x0 Msg: EEInfo: ComputerName: n/a    Lid: 8600    dwParam: 0x0 Msg: EEInfo: ProcessID: 3460    Lid: 12696   dwParam: 0x0 Msg: EEInfo:
    Generation Time: 0414-04-07T16:32:03.2100000Z    Lid: 10648   dwParam: 0x0 Msg: EEInfo: Generating component: 2    Lid: 14744   dwParam: 0x0 Msg: EEInfo: Status: 1753    Lid: 9624   
    dwParam: 0x0 Msg: EEInfo: Detection location: 501    Lid: 13720   dwParam: 0x0 Msg: EEInfo: Flags: 0    Lid: 11672   dwParam: 0x0 Msg: EEInfo: NumberOfParameters: 4    Lid: 8856   
    dwParam: 0x0 Msg: EEInfo: prm[0]: Unicode  string: ncacn_ip_tcp    Lid: 8856    dwParam: 0x0 Msg: EEInfo: prm[1]: Unicode  string: <Server FQDN>    Lid: 12952   dwParam: 0x0 Msg: EEInfo:
    prm[2]: Long val: 2767313664    Lid: 12952   dwParam: 0x0 Msg: EEInfo: prm[3]: Long val: 382312662    Lid: 59505   StoreEc: 0x824         Lid: 50544   ClientVersion:
    15.0.847.32    Lid: 52080   StoreEc: 0x824         Lid: 36081      Lid: 51152      Lid: 52465   StoreEc: 0x80040115   
    Lid: 60065      Lid: 33777   StoreEc: 0x80040115    Lid: 59805      Lid: 52487   StoreEc: 0x80040115    Lid: 19778      Lid: 27970  
    StoreEc: 0x80040115    Lid: 17730      Lid: 25922   StoreEc: 0x80040115
    All of the issues listed above have been corrected, and all of the databases are mounted. Users are able to send and receive mail, but I can not migrate mail using the Migration Batch utility.
    The destination server is a Hyper-V Guest running Server 2012, SP1, and Exchange 2013
    The Source Server is Running Exchange 2007.
    I have tried doing a test move to another destination server that is also Server 2012, and Exchange 2013, and the migration also failed.
    I would appreciate any help you can give me!
    Thanks,
    Jon

    Any update if you have resolved the issue.
    Not similar, but this thread can be helpful while you migrate the mailboxes from exchange 2007 to 2013. Please check :http://social.technet.microsoft.com/Forums/exchange/en-US/721f0ae4-623a-4b02-adaf-f561d86c0426/move-mailboxes-and-public-folders-from-exchange-2007-to-exchange-2013?forum=exchangesvrdeploy&prof=required

  • ICal Syncs From Exchange, but not To Exchange -- funky Console error.

    I'm the IT guy troubleshooting a user's MacBook Pro 15" (not unibody) with Snow Leopard. The Mac users in my company have been having near-constant trouble with their email and calendars almost since the day they switched, first with Exchange 2003/Entourage and now with Exchange 2007/Snow Leopard (guess how I feel about those "Enterprise Ready" ads!) -- random show-stopping issues like this have plagued them and I delete and resync something almost weekly. (By comparison, the hundreds of Outlook users on my server have never needed to delete and resync. Blackberry users occasionally, iPhone/WinMo users almost never.)
    Calendar items in iCal don't get synced up to my Exchange 2007 server, however creating an item in Outlook Web Access (i.e. directly on the server) get synced down to iCal just fine. I've tried refreshing, etc.
    In Console, there are repeated error messages saying "save failed" ... "Items cannot be deleted from alarms." Unfortunately it seems I'm the first person known to Google to have this error (yay!) hence the post here. Your advice in resolving the issue is appreciated because I'd rather not wipe his iCal and resync from Exchange, given that an unknown number of appointments haven't yet synced up to the server and thus data would be lost.
    Below is the full error message from Console, which repeats once every minute. The only differences between errors are the UserInfo which appears to increment. The appointment in question, "Call Adam Hird" from 9:00 to 9:15 on 11/19/09, looks fine in iCal except that it appears to have been renamed "Call with Adam Hird" with a location (a 10-digit phone number with hyphens) added (which iCal might not like, since the appointment name is just followed by a long dash "--" and nothing. Removing this doesn't appear to solve anything.) and the time changed to 9:00-9:30. It doesn't appear to fix itself when I change its time to 10:00 (again I don't want to delete anything since that might "fix" the problem without actually solving it.)
    11/20/09 10:34:45 AM iCal[45688] save failed: Error Domain=NSCocoaErrorDomain Code=1600 UserInfo=0x105b79590 "Items cannot be deleted from alarms." {
    NSLocalizedDescription = "Items cannot be deleted from alarms.";
    NSValidationErrorKey = alarms;
    NSValidationErrorObject = "<CalManagedEvent: 0x11648ac00> (entity: Event; id: 0x116bb9f60 <x-coredata://A9655919-B156-400F-A34C-EF02353540AF/Event/p4310> ; data: {\n alarms = (\n \"0x1167ea520 <x-coredata://A9655919-B156-400F-A34C-EF02353540AF/Alarm/p615>\"\n );\n attachments = (\n );\n attendeeComments = (\n );\n attendees = (\n );\n calendar = nil;\n calendarServerAccess = nil;\n changeKey = \"DwAAABYAAADEcN5FDQgWT5LycXCBLbcoAAETZn/9\";\n classification = 0;\n creationDate = nil;\n dateStamp = \"2009-11-19 08:06:16 -0700\";\n deleteSyncRecord = 0;\n dontSchedule = 0;\n dropBoxFreeBytes = nil;\n dropBoxLocation = nil;\n endDate = \"2009-11-19 09:15:00 -0700\";\n hasAlarm = 1;\n hasAttachment = 0;\n hasAttendee = 0;\n hasDropBox = 0;\n hasRecurrenceException = 0;\n isAllDay = 0;\n isDetached = 0;\n isInvitationDirty = 1;\n isInvitationSent = 0;\n isMyResponseDirty = 0;\n isPhantom = 0;\n isRSVPNeeded = 0;\n itemID = AQMkADcwMjFkMGM4LTZlYmMtNDM3Mi04OWYwLTM4ZDRjZDQzZD;\n localUID = \"local_74189D19-882A-4BE1-BC99-86D1E796245B\";\n location = nil;\n masterException = nil;\n messages = (\n );\n needsReply = 0;\n needsServerConfirmation = 0;\n notes = nil;\n omitSyncRecord = 0;\n organizerAddress = nil;\n organizerAddressString = nil;\n organizerCommonName = nil;\n permission = 3;\n privateComment = nil;\n recurrenceEndDate = nil;\n recurrenceExceptions = (\n );\n recurrenceRule = nil;\n sequence = 0;\n sharedUID = \"C33E682B-8DB1-436B-98B2-11F69E069E69\";\n startDate = \"2009-11-19 09:00:00 -0700\";\n status = 0;\n timeZone = \"US/Mountain\";\n title = \"Call Adam Hird\";\n transparency = 0;\n url = nil;\n urlString = nil;\n})";
    NSValidationErrorValue = "Relationship objects for {(\n <CalManagedAlarm: 0x1039b3890> (entity: Alarm; id: 0x1167ea520 <x-coredata://A9655919-B156-400F-A34C-EF02353540AF/Alarm/p615> ; data: <fault>)\n)} on (<NSRelationshipDescription: 0x114aaad40>), name alarms, isOptional 1, isTransient 0, entity Event, renamingIdentifier alarms, validation predicates (\n), warnings (\n), versionHashModifier (null), destination entity Alarm, inverseRelationship item, minCount 0, maxCount 0";
    }

    Despite my reservations, the user needed his calendar to sync ASAP, so I deleted the Adam Hird appointment. Then I thought "might be a good idea to back it up so I can help Apple Discussions troubleshoot!" so I pressed Cmd+Z to undo the deletion. Apparently this unstuck the clog-- the test appointments that weren't syncing up to Exchange deleted themselves (oops) and the Adam Hird appointment reverted back to its Exchange state (9:00-9:15, no location). Further tests show that syncing now works fine with no Console errors.
    Any ideas? Consider this a bug report, I guess...

  • Moving public folders from exchange 2003 to exchange 2010 error while moving replicas

    Dear All,
    i am in the process of migrating from Microsoft Exchange 2003 to Exchange 2010,
    i am done with moving all the mailboxes 300 mailbox almost with a 1.5 TB DB with no issues 
    when i tried all the processes, procedures, instructions and forums to move the public folder or 
    to use move all replicas from Exchange 2003 to Exchange 2010 i always get errors , now when i try 
    to open PF Management console from the exchange 2010 server i get it but it is disconnected
    then i can choose to coneect to the new server name EXCHANGE2010 with no issues
    when i try to expand the default folder and system folder i get the following error.
    OAB is set on the new server as default.
    when i try to add replica using power shell i get this error:
    WARNING: An unexpected error has occurred and a Watson dump is being generated: Object reference not set to an inst
     of an object.
    Object reference not set to an instance of an object.
        + CategoryInfo          : NotSpecified: (:) [Get-PublicFolder], NullReferenceException
        + FullyQualifiedErrorId : System.NullReferenceException,Microsoft.Exchange.Management.MapiTasks.GetPublicFolder
    following error when trying to expand PF on EXCHANGE 2010
    Microsoft Corporation
    Microsoft® Windows® Operating System
    6.0.6000.16386
    Unexpected error [0x7653450B] while executing command 'get-publicfolder -getchildren -identity '\' -server 'Exchange2010.ptdubai.com''.
    Microsoft.Exchange.Configuration.MonadDataProvider.CommandExecutionException: Unexpected error [0x7653450B] while executing command 'get-publicfolder -getchildren -identity '\' -server 'Exchange2010.ptdubai.com''. ---> System.NullReferenceException: Object
    reference not set to an instance of an object.
       at Microsoft.Exchange.Configuration.Tasks.MapiTaskHelper.GetMapiPublicFolderDatabasesIdentities(ADSystemConfigurationSession configurationSession, ADObjectId serverId, TaskErrorLoggingDelegate errorHandler)
       at Microsoft.Exchange.Configuration.Tasks.MapiTaskHelper.ValidateServerContainsPFDatabase(Server server, ADSystemConfigurationSession scSession, TaskErrorLoggingDelegate errorHandler)
       at Microsoft.Exchange.Configuration.Tasks.MapiTaskHelper.ResolvePublicFolderServerAndUserLegacyDNs(ADSystemConfigurationSession scSession, ServerIdParameter serverIdParameter, String& serverLegacyDN, String& userLegacyDN, Fqdn& serverFQDN,
    TaskErrorLoggingDelegate errorHandler)
       at Microsoft.Exchange.Configuration.Tasks.GetMapiObjectTask`2.CreateSession()
       at Microsoft.Exchange.Configuration.Tasks.DataAccessTask`1.InternalStateReset()
       at Microsoft.Exchange.Configuration.Tasks.GetTaskBase`1.InternalStateReset()
       at Microsoft.Exchange.Management.MapiTasks.GetPublicFolder.InternalStateReset()
       at Microsoft.Exchange.Configuration.Tasks.Task.ProcessRecord()
       at System.Management.Automation.CommandProcessor.ProcessRecord()
       --- End of inner exception stack trace ---
       at Microsoft.Exchange.Configuration.MonadDataProvider.MonadPipelineProxy.ClosePipeline(MonadAsyncResult asyncResult)
       at Microsoft.Exchange.Configuration.MonadDataProvider.MonadPipelineProxy.InternalEndInvoke(IAsyncResult results)
       at Microsoft.PowerShell.HostingTools.PipelineProxyBase.EndInvoke(IAsyncResult results)
       at Microsoft.Exchange.Configuration.MonadDataProvider.MonadCommand.EndExecute(MonadAsyncResult asyncResult)
       at Microsoft.Exchange.Configuration.MonadDataProvider.MonadDataReader.Close()
       at Microsoft.Exchange.Configuration.MonadDataProvider.MonadDataReader.Dispose(Boolean disposing)
       at System.Data.Common.DbDataAdapter.FillInternal(DataSet dataset, DataTable[] datatables, Int32 startRecord, Int32 maxRecords, String srcTable, IDbCommand command, CommandBehavior behavior)
       at System.Data.Common.DbDataAdapter.Fill(DataTable[] dataTables, Int32 startRecord, Int32 maxRecords, IDbCommand command, CommandBehavior behavior)
       at System.Data.Common.DbDataAdapter.Fill(DataTable dataTable)
       at Microsoft.Exchange.Management.SystemManager.DataTableLoader.Fill(RefreshRequestEventArgs e)
       at Microsoft.Exchange.Management.SystemManager.DataTableLoader.OnDoRefreshWork(RefreshRequestEventArgs e)
       at Microsoft.Exchange.Management.SystemManager.RefreshableComponent.worker_DoWork(Object sender, DoWorkEventArgs e)
       at System.ComponentModel.BackgroundWorker.WorkerThreadStart(Object argument)
    mscorlib, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089
    Microsoft.ManagementConsole, Version=3.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
    System, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089
    MMCFxCommon, Version=3.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
    System.Configuration, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a
    System.Xml, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089
    System.Windows.Forms, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089
    System.Drawing, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a
    Microsoft.Exchange.Management.PublicFolders, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
    Microsoft.Exchange.Management.SystemManager, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
    System.Core, Version=3.5.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089
    Microsoft.ManagementGUI, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
    Microsoft.Exchange.Data.Common, Version=14.0.631.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
    Microsoft.Exchange.ManagementGUI, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
    Microsoft.Exchange.Configuration.ObjectModel, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
    System.Data, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089
    Microsoft.Exchange.Diagnostics, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
    System.Web, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a
    Microsoft.Exchange.Data.Directory, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
    Microsoft.PowerShell.HostingTools, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
    System.Drawing.Design, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a
    Microsoft.Exchange.ManagementGUI.resources, Version=14.0.0.0, Culture=en, PublicKeyToken=31bf3856ad364e35
    Microsoft.Exchange.Data, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
    Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
    Microsoft.Exchange.Isam.Interop, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
    Microsoft.Exchange.Data.Transport, Version=14.0.631.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
    Microsoft.PowerShell.HostingTools, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
    BPA.Common, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
    BPA.UserInterface, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
    Interop.adsiis, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
    Interop.Migbase, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
    Microsoft.DKM.Proxy, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
    Microsoft.Exchange.AirSync, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
    Microsoft.Exchange.Approval.Applications, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
    Microsoft.Exchange.CabUtility, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
    Microsoft.Exchange.Cluster.Replay, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
    Microsoft.Exchange.Common, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
    Microsoft.Exchange.Configuration.RedirectionModule, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
    Microsoft.Exchange.Data.ApplicationLogic, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
    Microsoft.Exchange.Data.Mapi, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
    Microsoft.Exchange.Data.Providers, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
    Microsoft.Exchange.Data.Storage, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
    Microsoft.Exchange.EdgeSync.Common, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
    Microsoft.Exchange.EdgeSync.DatacenterProviders, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
    Microsoft.Exchange.Extensibility.Internal, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
    Microsoft.Exchange.InfoWorker.Common, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
    Microsoft.Exchange.Live.DomainServices, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
    Microsoft.Exchange.MailboxReplicationService.Common, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
    Microsoft.Exchange.MessageSecurity, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
    Microsoft.Exchange.MessagingPolicies.Rules, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
    Microsoft.Exchange.Net, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
    Microsoft.Exchange.Rpc, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
    Microsoft.Exchange.Search.ExSearch, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
    Microsoft.Exchange.Search.Native, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
    Microsoft.Exchange.Security, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
    Microsoft.Exchange.StoreProvider, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
    Microsoft.Exchange.Transport.Agent.AntiSpam.Common, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
    Microsoft.Exchange.Transport.Agent.SenderId.Core, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
    Microsoft.Exchange.Transport, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
    Microsoft.Exchange.Transport.Logging.Search, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
    Microsoft.Exchange.Transport.Sync.Common, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
    Microsoft.Exchange.Transport.Sync.Worker, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
    Microsoft.Exchange.UM.UMCommon, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
    Microsoft.Exchange.UM.UmDiagnostics.Common, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
    Microsoft.Rtc.Collaboration, Version=3.1.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
    Microsoft.Rtc.Media, Version=3.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
    MSExchangeLESearchWorker, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
    System.Management.Automation, Version=1.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
    Microsoft.Exchange.Core.Strings, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
    Microsoft.Exchange.Core.Strings.resources, Version=14.0.0.0, Culture=en, PublicKeyToken=31bf3856ad364e35
    Microsoft.Exchange.HelpProvider, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
    pspluginwkr, Version=1.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
    System.Management, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a
    System.DirectoryServices, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a
    System.Design, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a
    Accessibility, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a
    MMCEx, Version=3.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
    Anonymously Hosted DynamicMethods Assembly, Version=0.0.0.0, Culture=neutral, PublicKeyToken=null
    Microsoft.Exchange.Data.Directory.resources, Version=14.0.0.0, Culture=en, PublicKeyToken=31bf3856ad364e35
    Microsoft.Exchange.Data.resources, Version=14.0.0.0, Culture=en, PublicKeyToken=31bf3856ad364e35
    Microsoft.Exchange.Configuration.ObjectModel.resources, Version=14.0.0.0, Culture=en, PublicKeyToken=31bf3856ad364e35
    i will be thankful for any assistant.
    PF DB is arounf 90 GB with alot of public folders and sub-folders. around 60 mail PF and too many subfolders.

    First and the most important thing you need to do is, upgrade exchange 2010 to SP2 and RU5.
    Exchange 2010 RTM support is long gone.
    http://www.microsoft.com/en-us/download/details.aspx?id=36768
    http://www.microsoft.com/en-us/download/details.aspx?id=41480
    Your exchange 2010 is still in stogeage ;)
    Cheers,
    Gulab Prasad
    Technology Consultant
    Blog:
    http://www.exchangeranger.com    Twitter:
      LinkedIn:
       Check out CodeTwo’s tools for Exchange admins
    Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose.

  • Hide from Exchange Address list works in EMC but not from ADUC

    We are using Exchange 2010 Version 14.3 (Build 123.4) in a 2008 AD environment. When hiding users from the GAL we found when performing this task from AD Users and Computers the box is check and we verify that it is checked in EMC but the user remains
    visible. This can be an active user or a disabled user. The results are the same. But when checking the box "Hide from Exchange address list" in the EMC the change is visible instantly. We can verify that both in the GAL and from OWA. It had worked
    prior but now is no longer effective from ADUC even though the box is checked in the EMC. I can check the box in ADUC and verify in Power shell HiddenFromAddressListsEnabled : True yet the user is not hidden. I assume that ADUC is fully integrated with Exchange
    but the changes are only effective from Exchange

    There are 3 2008 DC. I can see the change instantly on the EMC and in Power Shell. When the changes are made via the EMC the changes are instant. When made from ADUC they never update. I think you hit the nail on the head with the versions. I have only been
    here about 10 months and recently (2 months ago) fully decommission our 2003 Exchange which was hanging around for some time. Since I had experience I followed procedure and decommissioned the 2003 environment. Now as far ADUC my copy is Active Directory Users
    and Computers Version: 6.1.7601.17514
    I can assume from what I am reading that even though the check box and tabs for Exchange can be added, they do not function completely from ADUC? I just need to provide our Help Desk with a "best practices" They have been disabling and hiding users
    via ADUC for years and claim it just stopped working.
    So is it a correct statement that Exchange 2010 and above attributes can no longer be changed via ADUC?
    ~Steve

  • Questions about upgrading from Exchange 2010 RTM to Exchange 2010 Service Pack 3

    I am preparing to perform an maintenance upgrade on our current Exchange 2010 Server, to Service Pack 3 (and any post-SP3 roll ups), but I have a couple questions about the process.
    Current Exchange Server details:
    Exchange 2010 Standard
    Version: 14.0 (Build 639.21) - from Exchange Management Console
    Version: 14.0.702.4000 - from Outook client
    Active Directory forest and domain levels: Windows 2008 R2 native
    The questions I have are:
    1.  Can I assume that because it's version 10.0.702.4000 I am on Exchange Server 2010 RTM Update Rollup 4?
    2.  Can Exchange 2010 Standard RTM be patched directly to Service Pack 3, or would I need to perform incremental patches (i.e. SP1, SP2, etc.) before going to SP3?
    3.  Do I need to manually perform the AD domain schema prep before applying Service Pack 3, or will the Service Pack 3 update process automatically handle the modifications of the AD schema?

    Hi,
    Here are my answers you can refer to:
    1. Firstly, I’d like to explain , we can use connection status to check our Exchange server version from Outlook client:
    http://office.microsoft.com/en-in/outlook-help/determine-the-version-of-microsoft-exchange-server-my-account-connects-to-HA010117038.aspx
    And I check my version from both EMC and Outlook client. It’s same.
    2. We can directly update RTM version to SP3 , and the update will take an additional 30 minutes or longer per database.
    3. Since Exchange 2010 SP3 makes updates to the Active Directory schema, we need prepare AD domain schema. However, it will automatically prepare AD and the domain when you install the update.
    For more information, you can refer to the following article:
    http://technet.microsoft.com/en-us/library/jj965774(v=exchg.141).aspx
    If you have any question, please feel free to let me know.
    Thanks,
    Angela
    Angela Shi
    TechNet Community Support

  • What is the email for the covent garden apple store (UK), if not apple uk. I am in canada and need to contact THIS store (for an insurance claim) and the phone system won't work for a long distance call.

    I am currently living in Canada (but I am from the UK).
    I lost my iphone 4S 32GB a couple of weeks ago and I need to try and prove to my insurance company that the iphone was a 32GB.
    I was told by an apple store near where i live that the original store where i purchased my iphone may be able to find records on my phone and print out a receipt for me. I can't get through to the Covent Garden apple store in london (where i brought the phone), because the automated phone system that apple uses doesn't seem to like long distance phone calls.
    Is there an email for the covent garden store, or for apple uk? I tried toi chat to an apple advisor online, but because of my location i got put through to apple USA.

    https://selfserve.apple.com/agreementWarrantyDynamic.do
    I noticed an error for some reason, the last two characters should have been do rather than co.

  • Monitor vibration over long distance ( 300m)

    Hi everyone,
    Currently, I have a project to monitor vibration (16 IEPE channels) from a station that is more than 300m away from monitoring station. Looking at NI's products, I have a few options:
    1. Using ENET-9234:
    - Only 4 channel/module. I need to use 4 modules in total, and need to connect to a router.
    - Ethernet distance is limited at 100m. To reach 300m, I need to use at least 2 repeaters, which are not suitable for my project (off-shore environment)
    2. Using MXI-4 with Fiber Optic: PXI-8336
    - Maximum allowed distance is 200m.NI recommend to add another segment (i.e. add another PXI chassis in between) to extend range to 400m. Or use optical converter to convert between multi-mode fiber to single-mode fiber to extend range
    http://digital.ni.com/public.nsf/allkb/C86BF63CC73C6721862575F2005A246D
    These recommendations are not suitable either due to harsh contion in the sea and difficult maintenance.
    3. Last option is acquire and process data at the site. Then transfer only processed data back to monitoring station over GPIB or RS-485.
    I would like to seek your advices on these options. Is there any way to avoid the repeaters in between?
    If you have any other ideas, please kindly let me know.
    Thank you very much!
    Have a great week ahead!
    PQH

    I also like the cRIO approach.  There are copper to fiber media converters on the market that offer single mode fiber which is what you would need for the longer distance. 
    Check out the following tools to help you get up and running quickly with cRIO:
    This listing is an attempt to list and briefly describe core tools that speed the development of waveform acquisition and analysis applications on the CompactRIO and RT platforms. 
      NI CompactRIO Developers Guide: This is a core developer's guide for a wide range of waveform acquisition and analysis applications.  It provides useful background on CompactRIO and control applications in particular.  It has chapters on waveform acquisition as well as deployment and management of applications on CompactRIO. 
    http://www.ni.com/compactriodevguide/
      Reference Applications for cRIO Waveform Acquisition:  This is the core template for acquiring waveforms for analysis, including vibration, electrical power, and structural monitoring.  It makes a great starting point for waveform applications on cRIO. 
    http://zone.ni.com/devzone/cda/epd/p/id/6206
      cRIO Reference Designs for Structural Health Monitoring:  This reference builds on the waveform acquisition reference and adds scan engine for slowly changing signals as well as TDMS data logging on event.
    http://zone.ni.com/devzone/cda/tut/p/id/9851
      Simple Messaging Reference Library (STM): This tool provides a TCP/IP communications protocol which is used in the benchmarks shown on the waveform acquisition reference page.  It is an excellent tool for efficient communications between cRIO and a host, easily supporting time waveform live streaming.
    http://zone.ni.com/devzone/cda/epd/p/id/2739
      Reference Library for Converting Between LabVIEW and XML Data (GXML):  This reference provides a remote XML configuration tool, to be used for remote configuration of the cRIO LabVIEW application.
    http://zone.ni.com/devzone/cda/epd/p/id/6330
      LabVIEW Syslog Protocol Reference Library: This reference offers a UDP cRIO status monitor to indicate to the host the operational status of the remote cRIO
    http://forums.ni.com/ni/board/message?board.id=Components&thread.id=51
      Reference Applications for cRIO Order Analysis Using a High Speed Tach:   This reference offers tachometer or encoder interpretation in FPGA when the I/O device is in a separate and higher speed loop. 
    http://zone.ni.com/devzone/cda/epd/p/id/6301
      DSA Module Synchronization Reference Design for Multiple cRIO Chassis:  This reference is useful when the timing of I/O needs to be tightly synchronized between two cRIO chassis.  It works with a signal line, as well as with GPS. 
    http://zone.ni.com/devzone/cda/epd/p/id/6146
       Additional NI Systems Engineering Components are listed here:  Additional tools can be found on the Systems Engineering Components discussion forum. 
    http://forums.ni.com/ni/board?board.id=Components
    Hope this helps you get started with cRIO, which is a great choice for industrial oil platform applications for temperature, and Class 1 Div 2 certifications. 
    Preston Johnson
    Principal Sales Engineer
    Condition Monitoring Systems
    Vibration Analyst III - www.vibinst.org, www.mobiusinstitute.com
    National Instruments
    [email protected]
    www.ni.com/mcm
    www.ni.com/soundandvibration
    www.ni.com/biganalogdata
    512-683-5444

Maybe you are looking for

  • Paypal email message content not found in Mail search

    I've looked on the net and can't find any one else reporting this problem so it has to be something at my end. My Mail search cannot find any word found in the message body of an email from Paypal. I just upgraded to Yosemite so thought it was a prob

  • Poor image quality in Webhelp

    Hi I am using FM11-RH10 as part of TCS4. I have images referenced in FrameMaker book. These images are clear and are of good quality (no blurry text or pixelated graphics). Now, when I import the FM book into RH, the image clarity is slightly affecte

  • HTML on a Mac projector?

    Hi all! I wanted to do a cross-platform cd where at some point the cd would go to a specific address on the web (ours) where some content (html) would be available. If the user doesn't have internet a local html file would be used. I dont need a full

  • AWM closes on connection to DB - Urgent!

    Hi there, I have installed Analytic Workspace Manager 10.2.0.1...and have set the database to my current database (10.2)... However, when I try to connect to the database, it closes the window and gives the following error report : Local Time = Fri J

  • I can not open any attachment

    I can not open any attachment in my MACBook Air laptop. sometime I only can access the attachments as HTML. Note that i am using Outlook Web Access to access my company email..