Long load times for large video tracks

Is there a recommended file size to stay under for video tracks in iTuens U? I know the hard limit is 500Mb per upload, but it seems as though any file that is more than about 10 minutes in length takes upwards of 10 minutes or longer to load. A short video (under 5 minutes) will load immediately. Is iTunes content not really streamed?

No, it is not streamed. But iTunes U isn't setup to be a streaming service. If you sniff packets (I didn't want to, but our security guy made me because of a local issue ... long story), you'll see that content is grabbed by way-of-an HTTP GET. There is a certain sense to that ... iTunes and iTunes U are, effectively, aggregators of content. You can get iTunes U to stream ... sort of ... but it is not a true streaming service (and, in fairness, it wasn't designed to be).
There is a trick you can play with encoding ... I don't have my notes with me (someone will remember) ... wherein you can ask that content be encoded to play as quickly as possible ... "instant on". There are a couple of apps, I believe, that help automate the process. It is not the same as streaming, but is helpful in situations in which you want a streaming effect.

Similar Messages

Long loading times for Safari on iPad Air with iOS8

I've had long loading times in Safari sInce upgrading to iOS8 on my iPad Air 128 GB. Are any of you having the same experience?

Sometimes I question myself, how come that iOS being held in beta for over quarter or even over a half a year, and most certainly long enough in alpha, still comes out so much raw and buggy every release? Sometimes it feels like it's only getting worse concerning the debugging.
I wanted to address the HR manager of the Apple Inc. to query him/her about HIS/HER dedication to the overall work being done. Why, the ****, does Safari get slow, why, the ****, is it unpredictable to define whether a sound stream in Safari's tab will end upon tab closure or not. Morever, why do iPhone iMessages fail to mark a message or a chain as a read one even thought you just really did it. Beyond that miriad of similar questions I have just another three, since when is it official Apple support position to advise you to wipe out your device and install everything back from iTunes, not the cloud? But what is more important, how come that support representative tells you first to back up your buggy iPad, wipe it out and restore from that backup both with iTunes? Finally, we all know how Apple does cherish it's developers, can somebody tell me how, for heavens sake, this website ever possible to exist then — Texts From Xcode?
I don't want neither need to mention that switching between tabs in iOS7 (I have had no chance to test it in iOS8) in Safari never gave you any sure answer whether your tab will be reloaded when you get back or not: whether have you copy any post before leaving, to paste back on return or not.
After all I do still love Apple, I do love people's ideas. I do love the overall outcome, but I want to tell Mr. Cook one phrase I heard when I used to be a head of a department in a medium size company and had to deal with continuous fails of the personnel and most often ended up doing much things myself, it was not the exact situation as with Apple although I hope you can trace a path: If a manager has to do anything besides managing he or she failed to manage one major issue — the personnel one.

Extremely long load times for Cisco's WEBEX.

Thanks

My company attends numerous meetings with our customers/suppliers and WEBEX is giving me headaches. 5-15 minute load times. Conference room PC is running win7 and I've tried both google chrome's webex app and just running webex from IE to no avail. These connections do go through eventually but I'm constantly hounded about why they are taking so long and I don't know why. Have any of you experienced this or have any clue as to a possible root cause?
This topic first appeared in the Spiceworks Community

Qt won't play .mpg - long load time for .wmv

2 questions about qt:
1) why won't qt play .mpg files when VLC plays them with no problems?
2) why does it take sooooo long for qt to load a .wmv file (I assume it's using flip4mac) when VLC loads it almost instantaneously?
thanks.
btw, using latest version of qt (10.0) on the latest version of Mac OSX (10.6.7)

1) why won't qt play .mpg files when VLC plays them with no problems?
While the MPG file extension is normally associated with multiplexed MPEG-1 video content on a Mac, this is not true for other platform users. For instance, the file may alternately contain anything from a simple MP3 audio stream to multiplexed MPEG-2 video or even AVCHD with AC3 audio. So in order to answer your question specifically, you need to tell us what specific form of compressed data is contained within the file. Basically, VLC provides its own built-in codec support which does not rely on your Mac component configuration while basic Mac support is limited to "playback only" compatibility of "muxed" MPEG-1 video with layer layer 1 or layer 2 audio unless you purchase/install specific additional component support like the Apple MPEG-2 Playback video only component and even then you would have to use a secondary application like MPEG Streamclip to to handle/bridge the synchronization of several audio formats.
2) why does it take sooooo long for qt to load a .wmv file (I assume it's using flip4mac) when VLC loads it almost instantaneously?
VLC plays the WMV data directly "on the fly" while the Flip4Mac component must read the entire file and cache the partially decoded data for direct playback by the QT player. You can avoid this delay by simply saving the partially expanded file data to an MOV file container using the "Save/Save As..." option. The resulting MOV file, however, will be much larger than the original WMV file.

Can a BIG form be served up one page at a time to avoid long load time?

Tricks I have read for optimizing the load time of large forms are not helping. Linearization causes the first page to render quickly, but you can't interact with the fields until the whole form finishes loading -- no help there. Is there a way to break the form into pages (without creating entirely separate forms) so the user can fill out a page, hit a Next Page button, fill out that page, etc.? Understood that this is an old school idea, but until Reader can download a 1+ MB form in less time than it takes an average user to get ticked off, old school might do the trick.
Alternatively, is there a way to construct a form so you can start interacting with it without having to wait for it all to load? This question comes from the (uninformed) assumption that maybe there are forward references that can't be satisfied until all the bits have come over the wire. If that's right, can a multipage form be architected so as to avoid this problem?

No that technology does not exist yet. There are form level events that need to have the entire document there before they can fire. Also you would have to keep track of where you are so that would mean some sort of session information for each user.

Long load times and poor application performance

We have packaged and deployed Adobe CC using SCCM within my school division. It pushed out fine, but now when we attempt to open Photoshop (or any other CC app) it has unusually long load times. 2-4 minutes. It seems to be hanging at the "Reading preferences" stage. After the application appears to have started, it takes an unusually long time to actually start working in the application (it appears to just hang).

Hello There,
EXE's always bundle additional files because it is a stand-alone entity. And, if the size 9GB then it will surely take time to load all the files. I'll check with the team again on how we can optimize it. BTW, are the videos inserted as slide video or Event video?
Thanks,
Vish

Long Load Times on Graphic Intensive Games

I'm experiencing some absurdly long load times (1-3 hours) with many games (SPORE, Portal, X:3, etc...) that I believe may be related to how graphically intensive they are. Older games with lower graphics quality (WoW, Civ 4, etc...) load up fine.
When I load any newer game the icon appears in the tray and the computer does nothing else for at least an hour, whereupon the program loads and begins playing immediately--often without any further delays or issues.
I also use Boot Camp to run Windows Vista (Ultimate 32) and experience no delays when running SPORE on Windows.
Below are my specs:
Hardware:
Hardware Overview:
Model Name: iMac
Model Identifier: iMac5,1
Processor Name: Intel Core 2 Duo
Processor Speed: 2.33 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache: 4 MB
Memory: 2 GB
Bus Speed: 667 MHz
Boot ROM Version: IM51.0090.B09
SMC Version: 1.9f4
Serial Number: QP7121Q** <Edited by Moderator>
Network:
Bluetooth:
Type: PPP (PPPSerial)
Hardware: Modem
BSD Device Name: Bluetooth-Modem
Has IP Assigned: No
IPv4:
Configuration Method: PPP
IPv6:
Configuration Method: Automatic
Proxies:
Proxy Configuration Method: Manual
Exclude Simple Hostnames: 0
FTP Passive Mode: Yes
Auto Discovery Enabled: No
Built-in Ethernet:
Type: Ethernet
Hardware: Ethernet
BSD Device Name: en0
Has IP Assigned: No
IPv4:
Configuration Method: DHCP
IPv6:
Configuration Method: Automatic
Proxies:
FTP Proxy Enabled: No
FTP Passive Mode: Yes
Gopher Proxy Enabled: No
HTTP Proxy Enabled: No
HTTPS Proxy Enabled: No
RTSP Proxy Enabled: No
SOCKS Proxy Enabled: No
Ethernet:
MAC Address: 00:17:f2:d4:e8:98
Media Options:
Media Subtype: Auto Select
Built-in FireWire:
Type: FireWire
Hardware: FireWire
BSD Device Name: fw0
Has IP Assigned: No
IPv4:
Configuration Method: DHCP
IPv6:
Configuration Method: Automatic
Proxies:
Proxy Configuration Method: Manual
Exclude Simple Hostnames: 0
FTP Passive Mode: Yes
Auto Discovery Enabled: No
Ethernet:
MAC Address: 00:19:e3:ff:fe:81:ea:7a
Media Options: Full Duplex
Media Subtype: Auto Select
Software:
System Software Overview:
System Version: Mac OS X 10.5.3 (9D34)
Kernel Version: Darwin 9.3.0
Boot Volume: MacintoshHD
Boot Mode: Normal
Computer Name: emeldi
User Name: Mike (mike)
Time since boot: 1 day9:05
ATA:
ATA Bus:
MATSHITADVD-R UJ-85J:
Capacity: 423.4 MB
Model: MATSHITADVD-R UJ-85J
Revision: FCQ5
Serial Number:
Removable Media: Yes
Detachable Drive: No
BSD Name: disk1
Protocol: ATAPI
Unit Number: 0
Socket Type: Internal
Low Power Polling: Yes
Mac OS 9 Drivers: No
Partition Map Type: Unknown
S.M.A.R.T. status: Not Supported
Volumes:
SPORE:
Capacity: 368.7 MB
Media Type: CD-ROM
Writable: No
File System: ISO Rockridge
BSD Name: disk1s0
Mount Point: /Volumes/SPORE
Volumes:
disk1s0:
Capacity: 368.7 MB
Media Type: CD-ROM
Writable: No
File System: ISO Rockridge
Audio (Built In):
Intel High Definition Audio:
Device ID: 0x83847680
Audio ID: 23
Available Devices:
Headphone:
Connection: Combo
Microphone:
Connection: Internal
Speaker:
Connection: Internal
Line In:
Connection: Combo
S/P-DIF Out:
Connection: Combo
S/P-DIF In:
Connection: Combo
Bluetooth:
Apple Bluetooth Software Version: 2.1.0f17
Hardware Settings:
emeldi:
Address: 00-17-f2-be-d3-95
Manufacturer: Cambridge Silicon Radio
Firmware Version: 3.1965 (3.1965)
Bluetooth Power: On
Discoverable: No
Requires Authentication: No
Services:
Bluetooth File Transfer:
Folder other devices can browse: ~/Public
Requires Authentication: Yes
State: Enabled
Bluetooth File Exchange:
Folder for accepted items: ~/Documents
Requires Authentication: No
When other items are accepted: Ask
When PIM items are accepted: Ask
When receiving items: Prompt for each file
State: Enabled
Devices (Paired, Favorites, etc):
JabraBT125:
Name: JabraBT125
Address: 00-1a-45-81-c4-f6
Type: Headset
Services: Headset, Hands-Free unit
Paired: Yes
Favorite: Yes
Connected: No
Manufacturer: Cambridge Silicon Radio ($3, $978)
Incoming Serial Ports:
Serial Port 1:
Name: Bluetooth-PDA-Sync
RFCOMM Channel: 3
Requires Authentication: No
Outgoing Serial Ports:
Serial Port 1:
Address:
Name: Bluetooth-Modem
RFCOMM Channel: 0
Requires Authentication: No
Diagnostics:
Power On Self-Test:
Last Run: 6/22/08 3:50 AM
Result: Passed
Disc Burning:
MATSHITA DVD-R UJ-85J:
Firmware Revision: FCQ5
Interconnect: ATAPI
Burn Support: Yes (Apple Shipping Drive)
Cache: 2048 KB
Reads DVD: Yes
CD-Write: -R, -RW
DVD-Write: -R, -RW, +R, +R DL, +RW
Write Strategies: CD-TAO, CD-SAO, DVD-DAO
Media:
Type: CD-ROM
Blank: No
Erasable: No
Overwritable: No
Appendable: No
FireWire:
FireWire Bus:
Maximum Speed: Up to 400 Mb/sec
Graphics/Displays:
ATI Radeon X1600:
Chipset Model: ATY,RadeonX1600
Type: Display
Bus: PCIe
PCIe Lane Width: x16
VRAM (Total): 256 MB
Vendor: ATI (0x1002)
Device ID: 0x71c5
Revision ID: 0x0000
ROM Revision: 113-xxxxxx-139
EFI Driver Version: 01.00.139
Displays:
iMac:
Display Type: LCD
Resolution: 1680 x 1050
Depth: 32-bit Color
Built-In: Yes
Core Image: Hardware Accelerated
Main Display: Yes
Mirror: Off
Online: Yes
Quartz Extreme: Supported
Display Connector:
Status: No display connected
Memory:
BANK 0/DIMM0:
Size: 1 GB
Type: DDR2 SDRAM
Speed: 667 MHz
Status: OK
Manufacturer: 0x2CFFFFFFFFFFFFFF
Part Number: 0x3136485446313238363448592D3636374433
Serial Number: 0xDB086DDD
BANK 1/DIMM1:
Size: 1 GB
Type: DDR2 SDRAM
Speed: 667 MHz
Status: OK
Manufacturer: 0x2CFFFFFFFFFFFFFF
Part Number: 0x3136485446313238363448592D3636374433
Serial Number: 0xDB086DDC
Power:
System Power Settings:
AC Power:
System Sleep Timer (Minutes): 0
Disk Sleep Timer (Minutes): 0
Display Sleep Timer (Minutes): 15
Sleep On Power Button: Yes
Automatic Restart On Power Loss: Yes
Wake On LAN: Yes
Display Sleep Uses Dim: No
Hardware Configuration:
UPS Installed: No
Printers:
Lexmark All In One:
Status: Idle
Print Server: Local
Driver Version: 1.1.3
Default: Yes
URI: usb://Lexmark/Lexmark%20All%20In%20One?location=1d120000
PPD: Lexmark All In One
PPD File Version: 1.0
PostScript Version: (3011.104) 0
Lexmark All In One-1:
Status: Idle
Print Server: Local
Driver Version: 1.1.3
Default: No
URI: usb://Lexmark/Lexmark%20All%20In%20One?location=3d120000
PPD: Lexmark All In One
PPD File Version: 1.0
PostScript Version: (3011.104) 0
Serial-ATA:
Intel ICH7-M AHCI:
Vendor: Intel
Product: ICH7-M AHCI
Speed: 1.5 Gigabit
Description: AHCI Version 1.10 Supported
WDC WD2500JS-40TGB0:
Capacity: 232.89 GB
Model: WDC WD2500JS-40TGB0
Revision: 20.06C04
Serial Number: WD-WCANY2508218
Native Command Queuing: Yes
Queue Depth: 32
Removable Media: No
Detachable Drive: No
BSD Name: disk0
Mac OS 9 Drivers: No
Partition Map Type: GPT (GUID Partition Table)
S.M.A.R.T. status: Verified
Volumes:
MacintoshHD:
Capacity: 232.57 GB
Available: 11.26 GB
Writable: Yes
File System: Journaled HFS+
BSD Name: disk0s2
Mount Point: /
Volumes:
disk0s2:
Capacity: 232.57 GB
Available: 11.26 GB
Writable: Yes
File System: Journaled HFS+
USB:
USB High-Speed Bus:
Host Controller Location: Built In USB
Host Controller Driver: AppleUSBEHCI
PCI Device ID: 0x27cc
PCI Revision ID: 0x0002
PCI Vendor ID: 0x8086
Bus Number: 0xfd
Built-in iSight:
Version: 1.84
Bus Power (mA): 500
Speed: Up to 480 Mb/sec
Manufacturer: Micron
Product ID: 0x8501
Vendor ID: 0x05ac (Apple Computer, Inc.)
USB Bus:
Host Controller Location: Built In USB
Host Controller Driver: AppleUSBUHCI
PCI Device ID: 0x27c9
PCI Revision ID: 0x0002
PCI Vendor ID: 0x8086
Bus Number: 0x3d
USB Hub:
Version: 1.00
Bus Power (mA): 500
Speed: Up to 12 Mb/sec
Manufacturer: OEM
Product ID: 0x0061
Vendor ID: 0x043d
Lexmark All-in-One:
Version: 1.00
Bus Power (mA): 500
Speed: Up to 12 Mb/sec
Manufacturer: Lexmark
Product ID: 0x0069
Vendor ID: 0x043d
All-in-One:
Version: 1.00
Bus Power (mA): 500
Speed: Up to 12 Mb/sec
Manufacturer: Lexmark
Product ID: 0x0060
Vendor ID: 0x043d
USB Bus:
Host Controller Location: Built In USB
Host Controller Driver: AppleUSBUHCI
PCI Device ID: 0x27ca
PCI Revision ID: 0x0002
PCI Vendor ID: 0x8086
Bus Number: 0x5d
USB Multimedia Keyboard:
Version: 1.00
Bus Power (mA): 500
Speed: Up to 12 Mb/sec
Manufacturer: ALCOR
Product ID: 0x9462
Serial Number: Au9462
Vendor ID: 0x058f
USB RECEIVER:
Version: 25.10
Bus Power (mA): 100
Speed: Up to 1.5 Mb/sec
Manufacturer: Logitech
Product ID: 0xc50e
Vendor ID: 0x046d
USB Multimedia Keyboard:
Version: 1.22
Bus Power (mA): 250
Speed: Up to 12 Mb/sec
Manufacturer: ALCOR
Product ID: 0x9410
Serial Number: Au9462
Vendor ID: 0x058f
USB Bus:
Host Controller Location: Built In USB
Host Controller Driver: AppleUSBUHCI
PCI Device ID: 0x27c8
PCI Revision ID: 0x0002
PCI Vendor ID: 0x8086
Bus Number: 0x1d
USB Bus:
Host Controller Location: Built In USB
Host Controller Driver: AppleUSBUHCI
PCI Device ID: 0x27cb
PCI Revision ID: 0x0002
PCI Vendor ID: 0x8086
Bus Number: 0x7d
Bluetooth USB Host Controller:
Version: 19.65
Bus Power (mA): 500
Speed: Up to 12 Mb/sec
Manufacturer: Apple, Inc.
Product ID: 0x8206
Vendor ID: 0x05ac (Apple Computer, Inc.)
IR Receiver:
Version: 1.10
Bus Power (mA): 500
Speed: Up to 12 Mb/sec
Manufacturer: Apple Computer, Inc.
Product ID: 0x8240
Vendor ID: 0x05ac (Apple Computer, Inc.)
AirPort Card:
AirPort Card Information:
Wireless Card Type: AirPort Extreme (0x14E4, 0x87)
Wireless Card Locale: USA
Wireless Card Firmware Version: Broadcom BCM43xx 1.0 (4.170.46.7)
Current Wireless Network: ACTIONTEC
Wireless Channel: 9
Firewall:
Firewall Settings:
Mode: Limit incoming connections to specific services and applications
Services:
File Sharing (AFP): Allow all connections
Printer Sharing: Allow all connections
Applications:
com.apple.iChat: Allow all connections
com.apple.ODSAgent: Allow all connections
com.aspyr.empireatwar: Block all connections
com.RealNetworks.RealPlayer: Allow all connections
Locations:
Automatic:
Active Location: Yes
Services:
Bluetooth:
Type: PPP
IPv4:
Configuration Method: PPP
IPv6:
Configuration Method: Automatic
Proxies:
Proxy Configuration Method: 2
Exclude Simple Hostnames: No
FTP Passive Mode: Yes
Auto Discovery Enabled: No
PPP:
ACSP Enabled: No
Display Terminal Window: No
Redial Count: 1
Redial Enabled: Yes
Redial Interval: 5
Use Terminal Script: No
Dial On Demand: No
Disconnect On Fast User Switch: Yes
Disconnect On Idle: Yes
Disconnect On Idle Time: 600
Disconnect On Logout: Yes
Disconnect On Sleep: Yes
Idle Reminder: No
Idle Reminder Time: 1800
IPCP Compression VJ: Yes
LCP Echo Enabled: No
LCP Echo Failure: 4
LCP Echo Interval: 10
Log File: /var/log/ppp.log
Verbose Logging: No
Built-in Ethernet:
Type: Ethernet
BSD Device Name: en0
Hardware (MAC) Address: 00:17:f2:d4:e8:98
IPv4:
Configuration Method: DHCP
IPv6:
Configuration Method: Automatic
AppleTalk:
Configuration Method: Node
Proxies:
FTP Proxy Enabled: No
FTP Passive Mode: Yes
Gopher Proxy Enabled: No
HTTP Proxy Enabled: No
HTTPS Proxy Enabled: No
RTSP Proxy Enabled: No
SOCKS Proxy Enabled: No
Built-in FireWire:
Type: FireWire
BSD Device Name: fw0
Hardware (MAC) Address: 00:19:e3:ff:fe:81:ea:7a
IPv4:
Configuration Method: DHCP
IPv6:
Configuration Method: Automatic
AppleTalk:
Configuration Method: Node
Proxies:
Proxy Configuration Method: 2
Exclude Simple Hostnames: No
FTP Passive Mode: Yes
Auto Discovery Enabled: No
AirPort:
Type: IEEE80211
BSD Device Name: en1
Hardware (MAC) Address: 00:19:e3:df:5e:9b
IPv4:
Configuration Method: DHCP
IPv6:
Configuration Method: Automatic
AppleTalk:
Configuration Method: Node
Proxies:
Proxy Configuration Method: 2
Exclude Simple Hostnames: No
FTP Passive Mode: Yes
Auto Discovery Enabled: No
IEEE80211:
Allow Net Creation: Yes
Disconnect On Logout: No
InterferenceRobustness: 0
Join Mode: Automatic
JoinModeFallback: Prompt
MAC Address: 00:19:e3:df:5e:9b
PowerEnabled: 1
PreferredNetworks:
SecurityType: Open
SSID_STR: ACTIONTEC
Unique Network ID: F0FA7942-54E7-409B-A1CA-10B05F3B2EDE
SecurityType: WPA2 Personal
SSID_STR: D Pad
Unique Network ID: A391D57D-A4EC-4B2E-B741-0D6569BD77AB
Unique Password ID: 404D3742-17AA-4C24-A229-7E37725522EA
SecurityType: Open
SSID_STR: linksys
Unique Network ID: FD2A5229-348A-4E90-B4E2-48E4DE62C394
SecurityType: Open
SSID_STR: M and M
Unique Network ID: D980D42A-E76C-4A68-920D-AAC9537C26C9
SecurityType: Open
SSID_STR: default
Unique Network ID: 5A2D9117-3263-46B9-952D-A4463BA5F377
SecurityType: Open
SSID_STR: Sweet Lou's **** Shack
Unique Network ID: FA247542-1EF4-41B6-A242-688E75C85B57
RememberRecentNetworks: 1
Ethernet Adaptor (en2):
Type: Ethernet
BSD Device Name: en2
Hardware (MAC) Address: 00:01:23:45:67:89
IPv4:
Configuration Method: DHCP
IPv6:
Configuration Method: Automatic
AppleTalk:
Configuration Method: Node
Proxies:
Exceptions List: *.local, 169.254/16
FTP Passive Mode: Yes
Ethernet Adaptor (en3):
Type: Ethernet
BSD Device Name: en3
Hardware (MAC) Address: 00:10:32:54:76:98
IPv4:
Configuration Method: DHCP
IPv6:
Configuration Method: Automatic
AppleTalk:
Configuration Method: Node
Proxies:
Exceptions List: *.local, 169.254/16
FTP Passive Mode: Yes
Volumes:
net:
Type: autofs
Mount Point: /net
Mounted From: map -hosts
Automounted: Yes
home:
Type: autofs
Mount Point: /home
Mounted From: map auto_home
Automounted: Yes
Universal Access:
Universal Access Information:
Cursor Magnification: Off
Display: Black on White
Flash Screen: Off
Mouse Keys: Off
Slow Keys: Off
Sticky Keys: Off
VoiceOver: Off
Zoom: Off

That's old info for the HDD space--I've purchased an external, so my main drive stays plenty free, now.

Long loading time if no internet connection available (VS 2005 Redist)

Hallo forum members!
I've been searching for a solution for my problem for a while - without success. It isn't really a critical issue, but quite annoying anyways.
Here's the problem i'm dealing with: I've developed an .NET application using Visual Studio 2005 and the included Crystal Report classes. When deploying my module everything works as expected, offering a decent performance when loading the Crystal Report assemblies provided by the redistributable package - if an internet connection is available. If the system doesn't offer such a connection (e.g. not properly configured proxy settings) the module takes a huge amount of time to be loaded. An examination (using ProcMon) leaded to the conclusion that the Crystal Report assemblies try to retrieve the system connection settings from the registry in order to establish a connection to the internet. This is done only once when loading for the first time.
Has anyone experienced the same problem? What is this connection used for? Is there a way to suppress this behaviour on systems without a valid internet connection in order to avoid this annoying long loading time?
Thanks on advance for your help.
Greetings,
L.F.

Nothing like a good vacation. And I got your christmas present early :). While you were away we (actually one other customer) figured it out. I have written a note re. the resolution that was supposed to be published yesterday, but it's still not out there, so here it is as I submitted it:
Symptom
When a report is loaded is takes between 150 - 180 seconds to display
This is only reproducible on computers with no internet connection
There are no error messages and the report comes up eventually
Reproducing the Issue
Create a Windows application with the following function calls:
new Report()
report.SetDataSource(dataSet)
The function SetDataSource takes 2 plus minutes to execute
Cause
On SetDataSource() an attempt is made to connect to crl.verisign.com
SetDataSource() uses the framework and as per the Microsoft Knowledge Base specified under "Resolution", it is actually the framework that is attempting the connection
Resolution
Solution is described in this Microsoft Knowlege Base:
http://support.microsoft.com/kb/936707
The following Microsoft article also discusses the issue:
http://msdn.microsoft.com/en-us/library/bb629393.aspx
An alternative workaround to the above is as follows:
Open IE and go to the Tools menu and select Internet Options...
Go to the Advanced tab
Find the Security heading
Under the Security heading find "Check for publisher's certificate revocation"
Uncheck this option
Keywords
long time load crl.verisign.com certificate revoked internet
The note will be published here:
https://www.sdn.sap.com/irj/sdn/businessobjects-notes
and the number will be 1270414
Ludek

I recently upgraded to 10.6.7 and Safari 5.05. Safari now has a long load time when you initially boot it up and when selecting a new tab. Other than that it works fine. What can I do ?

I recently upgraded to 10.6.7 and Safari 5.05. Safari now has a long load time when you initially boot it up and when selecting a new tab. Other than that it works fine. What can I do ?

Check Safari / Preferences - Extensions. If you have any installed, turn that off, relaunch Safari.
If it's not Extensions, check for third party Safari add ons.
http://support.apple.com/kb/TS3230?viewlocale=en_US

Monitors for each video track?

Is there a way to have seperate Monitor windows for each video track, so as I scrub through a Sequence I can have a preview of what is on each track all at the same time (without using the Multi Camera editor)

What I do is find a sync point in the first clip and add a numbered clip marker to that point (for example, a camera flash or a music hit), and then edit it into the sequence. I do the same for the next clip(s), using the same numbered marker, and add those into the sequence. When I've added all the clips, select them all, and go to Clip > Synchronize > Numbered Marker, selecting the numbered marker that is common to all of the files. Once you hit OK, all of the clips will be synced around that point.
Definitely easier than looking at a four-up display and trying to figure out which one is which, IMO.

Increase in Loading time for LV search in 2011

Initially when I loaded LV2011 my quick drop and the search took nearly 5 seconds but now it takes nearly 20 seconds to load so is there any reason for this kind of performance. Also I don't have anyother big software loaded or running in my PC. I have added few toolkits from VI package manager may be that is the reason?.
The best solution is the one you find it by yourself

RavensFan wrote:
In my message in the other thread, I commented that I thought 20 seconds wasn't all that long. But I thought you were commenting on the loading time for LabVIEW itself. That does seem like a long time for any of the internal LabVIEW dialogs to come up.
(Actually, I find several internal dialogs seem to take longer to load the first time then they should including the properties dialog. But not 20 seconds long.)
Hopefully, with this message thread in the LabVIEW forum, others can comment and offer suggestions on how to determine what the issue your having is.
Yes now I have plenty of toolkits ( Thanks for spotting me in the other thread )
Jeff you hit the bullseye. The loading was set as Load palette when needed.
Thanks
The best solution is the one you find it by yourself

Long loading times and jerky playback

Hello,
I work often with Adobe Premiere CS6 but got an annoying problem.
When I have a project with many clips in the sequence, than I got really long loading times and often the playback is jerky
Is there a function, which reduces the loading times and/or the jerky playback?
I already used "Remove Unused" and "Delete Render Files".
Is it helpful to split the clips to serveral sequences and put all clips together at the end?
My computer specifications:
CPU: AMD Phenom II X6 1055T (2,8 GHz Hexa-Core)
RAM: 8 GB Corsair XMS3 DDR3 1333 MHz (2 GB reserved for other applications)
HDD with Adobe Premiere CS6: Crucial RealSSD C300 CTFDDAC064MAG
HDD with videoclips: first Samsung Spinpoint F3 1TB (HD103SJ)
HDD with projects: second Samsung Spinpoint F3 1TB (HD103SJ)
Graphic: NVIDIA GeForce GTX 460
OS: Microsoft Windows 7 Home Premium (64-Bit)
Is there a bottleneck at my hardware?
Thanks a lot!
Tim

Is there a bottleneck at my hardware?
Yes. The CPU, memory and motherboard. See the Warning here: http://ppbm7.com/index.php/tweakers-page/85-raid-or-not-to-raid
Also read the other articles http://ppbm7.com/index.php/tweakers-page

HT1577 Why am I experiencing long download times for an HD movie rental from itunes?

I have been experiencing long download times for movie rentals from itunes (this time 11 hours). I have even tried to use ethernet, turn off simultaneous downloads, and shut down my browser, to speed up the time but that didn't help. My internet download speed is about 7mbps. Any suggestions?

iTunes: Purchasing and viewing HD videos
When you purchase an HD video on a supported device or computer, only HD video will be downloaded. To download the SD version, you need to download the video again from your Purchased page. Conversely, if you purchase an HD video on an unsupported device, the SD version will be downloaded. Then, you will need to download the HD version from your Purchased page. Learn more about downloading previous purchases."

I had backed up my IPhone 4s on iCloud on Jan 19. I am now trying to do another back up but it says the time required is 7 hours. It appears to long a time for 1GB of data stored on the iCloud. Can someone help me please?

I had backed up my IPhone 4s on iCloud on Jan 19. I am now trying to do another back up but it says the time required is 7 hours. It appears to long a time for 1GB of data stored on the iCloud. Can someone help me please?

To be honest, that sounds about right.
For example on my 8Mbps (megbits) down service I get around 0.4Mbps upload. That is the equivalent of (very approximately) 3Mb (megabytes) per minute or 180Mb per hour. Over 7 hours that would be just over 1Gb.
Obviously, it all depends on your connection speed, but that is certainly what I would expect, and that is why I use my computer for backing up, not iCloud. So much quicker.

Anyone else having extra long delivery time for the late 2013 macbook pro 15" 2.6ghz 1tb model?

Anyone else having extra long delivery time for the late 2013 macbook pro 15" 2.6ghz 1tb model?
As of today feb 15 i have been waiting for 78 days. Finland doesn't have an official apple store (only authorized resellers) It was my mistake because i should have bought from apple.com. But i think 2.5 months is too long and i have no information about when i can get it..

The low-end 15” rMBP with a 8 GB or RAM and a 256 GB SSD costs $2,000.
The low-end 15” rMBP with a 8 GB or RAM and a 512 GB SSD costs $2,300.
With 16 GB of RAM and a 512 GB SSD it costs $2,500.
The high-end 15” rMBP with a 16 GB of RAM and a 512 GB SSD costs $2,600.
All cost $500 dollars more with a 1 TB SSD.
So the SSD size is not a differentiating factor unless you prefer 256 GB.
If you think you need 16 GB of RAM and a 512 GB SSD then you might as well spend the extra $100 for the high-end model.
The high-end model will make a difference on gaming and graphics-oriented applications.
They tend to run other applications at about the same speed.
Both models are rated with 8 hours of battery life.
Benchmarks on PhotoShop comparing memory sizes: https://discussions.apple.com/thread/5659174?tstart=30
The speed was about 10% different between 8 GB and 16 GB models.
On other applications your mileage may vary.
Application benchmarks:
http://www.macworld.com/article/2059215/15-inch-retina-macbook-pro-review-a-tale -of-two-laptops.html
The low-end and high-end performed the about the same on non-graphics oriented applications.
Graphics oriented benchmarks:
On the Cinebench OpenGL benchmark the high-end was about twice as fast.
On the Unigine Heaven Benchmark benchmark they ran at about the same speed.
On the Unigine Valley Benchmark benchmark the high-end was about 1.5x as fast.
Message was edited by: hands4

Long load times for large video tracks

Similar Messages

Maybe you are looking for