Long Loadtime of Image (internet) Previews

Ok, so I had a WRT150N router on the third floor of my house and the Apple TV on the first floor of the house and everything was going fine. The thing I noticed was the instant loading of the previews of iTunes top movies, top music, trailers, etc. Now, I just bought an Airport Extreme Base Station with firmware 7.2.1 at the same place where my old router was. The thing I'm noticing now is it takes a lot longer to load top music, movies, tv shows, youtube previews, etc on my Apple TV. The signal strength that appears on the Apple TV is either 4 or 5 bars (fluxuates), this was also the case with the Linksys router. I tried power-cycling my cable modem and the Airport Extreme Base Station. Does anyone think that this might have something to do with either the Airport Extreme or Apple TV or the position of the two devices? Is anyone having longer load times of image previews of youtube, top music, top movies, etc?

After disabling the printer sharing service on the Airport Extreme Base Station and plugging my Powerbook directly up to the Airport Extreme Base station, I've noticed the sluggish load time of image previews of iTunes top movies, music, tv shows, etc or significantly faster if not at normal load times. Could the printer sharing feature or the shared HD feature slow down the performance of the network? (This may be more of an Airport BS question than an Apple TV one)

Similar Messages

Canon MP560 no longer recognized by Image Capture/Preview

I have a Canon MP560 wireless printer/scanner and for some reason the scanner can no longer be seen by either Image Capture, Preview, or the Canon mp560 scanner toolbox under the Print menu. This happened either after installing 10.6.5 or after installing the latest Canon Printer Driver updates (I am not sure which caused it, as I did both updates recently...)
It can, however, be seen by MP Navigator 3.0.
Anyone found a fix for this yet?
thanks

Okay, have done some testing and found some interesting things.
With a new install of 10.6.5 (selecting not to add any printers) I was not able to locate any Canon AIO via wireless. The Default Add Printer pane was empty so it looks like the printer and scanner driver needs to be present on the Mac. For the printer this is understood, as the Canon protocol 'canonijnetwork' is not present in the BJPrinters folder located in Library > Printers > Canon (due to the customized installation the Canon folder was not even present). In checking the Image Capture folder (HD > Library) I also found that the Devices folder was missing. Inside of here you would normally find the Canon IJScanner package/s for a standard installation of 10.6. But with the customized install this package was not present and appears to influence the Mac's ability to 'see' the networked scanner component. To confirm this, I installed the Canon v2.4.1 driver update, which in turn created the Devices folder in Image Capture and consequently made the scanner component appear in the Default Add Printer view.
Another observation was that prior to installing the Canon v2.4.1 update, Image Capture would still display the MP on the network, but under the Shared menu - not the Devices menu. So even without the ICA driver installed nor the MP scanner driver installed, I was still able to use Image Capture to scan a document from the wireless MP. The same was true for Preview in as far as the Networked Scanner selection showed all the MP's present on the wireless network.
At this stage I believe that the Canon driver update you mentioned may have contributed to part, if not all, of your current symptom. The install.log does have a record of what this update installs. If you checked it there may be record of the installer not completing correctly. In any case I assume that for your Mac this update did not complete correctly and is causing the problem. So one suggestion would be to run the [Canon Driver v2.4.1 update|http://support.apple.com/kb/DL899] again (or for the first time if you simply used Software Update previously) to see if this repairs the CanonIJScanner packages.

Can't drag images from preview drawer?

Can anyone tell me why I can no longer drag an image from the Preview drawer to copy the file to a new location? It was a great way to quickly sort through images in Panther, but now all I get is the white 'not allowed' cursor.

Yeah, annoying isn't it? What I've been doing to sort things is to empty my Trash. Then I can drag images from the Preview thumbs into the Trash. It allows you to MOVE them from where they were into the Trash this way. After I've gotten all of one category moved out, I open Trash and drag them into a new folder. Then I sort thru the remaining pix using my next category, and so on. It's the only way I've found to use Preview even close to the handy way I used to use it in Panther to quickly sort photos. But I don't much like the dis-improvement. BTW, if I remember, I will sometimes launch the old version of Preview that resides on my Panther drive. It still works. You can see animated gifs with it too (another function missing in action in the new Preview).
Francine
Schwieder

My Mac Book Pro suddenly will no longer connect to the Internet at my house. Help?

My Mac Book Pro suddenly will no longer connect to the Internet at my house. My son's MacBook connects just fine. My MacPro connects at work, at Starbucks, etc. just fine, but not at my house. My son's however has no problem whatsoever. I assume that since his computer connects that the router and modem is not the problem. And since my computer connects everywhere but here . . . . it is not a hardware issue. When directly connecting my MacBook Pro to the modem or router the problem was the same. . . no connection. Help?

From the menu bar, select
 ▹ About This Mac
Below the "OS X" legend in the window that opens, the OS version appears. Click the version line twice to display the serial number. If the number is missing or invalid according to this web form, take the machine to an Apple Store or other authorized service center to have the problem corrected.

Will no longer connect to the internet

All of a sudden Adobe Digital editions will no longer connect to the internet. It was fine before last Tuesday. Check internet settings and firewall and nothing helps. Why is it doing this and how can we fix it. Windows 7 - 64 bit

Did this [[Cannot connect after upgrading Firefox|start after upgrading firefox?]]
Generally if Firefox can't connect, but other applications can, it's a configuration problem with a [[Firewalls|software firewall]], either one you installed yourself, one that was included with other security software, or the built-in Windows Firewall.

My ipad will no longer connect to the internet. Everything else does.

My ipad 1 will no longer connect to the internet. Everything else does. and nothing new was done to the ipad. It's running ios 4 and was fine since the day it came out.

Emma-
In Safari, press on the Bookmarks icon and select History. Then press on Clear History at the top of that menu, and see it there is any improvement.
If not, try unplugging your WiFi router for a few seconds. Then reset the iPad's network. Go to Settings-General-Reset-Reset Network Settings. You will need to reconnect the iPad to WiFi.
Fred

Since updating my ipad it will no longer connect to the internet

since i've updated my software on my ipad it will no longer connect to the internet. my husbands iphone will not connect either. my laptop connects immediately and my internet signal is full strength. is there something we are missing?

Hello dchoffa,
Thank you for using Apple Support Communities!
I would start with this troubleshooting from the article named:
iOS: Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/TS1398
Be sure you're in range of your Wi-Fi router (access point).
Tap Settings > Wi-Fi and turn Wi-Fi off and on. If your W-Fi setting is dimmed, follow these steps.
Confirm that your Wi-Fi router and cable or DSL modem are connected to power, turned on, and connected to the Internet. If not, refer to your network administrator or Internet service provider (ISP) for assistance.
Restart your iOS device.
Tap Settings > Wi-Fi and locate the Wi-Fi network to which you're connected.
Tap and Forget this Network.
Try to connect to your desired Wi-Fi network.
Note: You may need to enter your Wi-Fi password again if your network requires one.
Turn your Wi-Fi router off and on2. If your ISP also provides cable or phone service, check with them before attempting this step to avoid interruption of service.
Update your device to the latest version of software.
Update your Wi-Fi router to the latest firmware2. For AirPort Base Stations, install updates using the AirPort Utility.
If the above troubleshooting does not resolve the issue, I would next try the troubleshooting in one of the other sections down toward the bottom that fits your scenario.
Regards,
Sterling

Safari no longer connects to the internet

I upgraded to OS Yosemite in my iMac (must be approaching 4 years old) and everything has been working fine. Had a couple of applications where they closed unexpectedly, but nothing major and things have continued as they always have. Apps have also automatically updated. As of today, Safari will no longer connect to the internet and I keep getting the classic "the server unexpectedly dropped the connection" blurb and I kept being told that a disk that I hadn't put in the machine is not being recognized.
I'm typing this on my MacBook Air so I know that Safari can work fine (also having no problem with my iPad or iPhone) and there is no issue with my ISP' modem (I'm with Virgin Media), connector or Netgear wireless router. Tonight I have performed a recovery install and now I have this annoying message saying how I need a particular Java plugin, which I can't sort out because Safari can't connect to the internet. I have also performed a router reset, without remedy.
Logically, as I see it, the issue lies with Safari, and due to it being the only internet access on my iMac, I can't even download Firefox or access the App Store so looks like I can't update. A friend is also having the same issues with his iPad, so I know this isn't just my iMac
Looking for some answers here? Anyone?
Thanks

Please read this whole message before doing anything.
This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
Step 1
The purpose of this step is to determine whether the problem is localized to your user account.
Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your documents or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this behavior; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
Step 2
The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Please take this step regardless of the results of Step 1.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of Steps 1 and 2.

Can no longer connect to the internet with the 580...

Hi, my PC was able to connect to the internet with my 5800 via a USB cable. Now, I can no longer connect to the internet with the 5800 via a USB cable.
I had never tried connecting the computer to the internet with the 5800 via Bluetooth prior to this incident, so I tried that. Strangely, it works.
My question is how come I can no longer use the 5800 via USB as a modem, but how come the 5800 via Bluetooth still works as a working modem?
Sorry, if my sentences are confusing. I have a terrible headache at the moment. While the Bluetooth connection works, I just feel better using the USB connection and knowing that my 5800 has a clean bill of health.
BTW, my PC is on Windows 7 Professional at the moment. I've tried uninstalling the Ovi Suite and reinstalling it, but that didn't work. I've also tried using PC suite instead of the Ovi Suite but that didn't work either. What other options do I have, beside hard resetting the phone? Thanks in advance.
Edit: BTW, the message shown when I tried to connect to the internet with the 5800 USB modem was "failed to establish a network connection".
Solved!
Go to Solution.

Hi,
I am so much tierd by trying to connect my phone to pc.
I have nokia 5800,and I used to connect my phone to PC by USB cable.
But from last 5 days I could not able to connect it.
The problem is that,
when I connect phone to pc,notification comes up that phone connected via ovi suit,but within a minute or 2,
"porable device" icon disappears from the task bar in the right hand corner,so connection could not proceed further.
Please help me in this asap.
I had tried following already:
1.format my PC
2.Installed new ovi suit
now please give me a proper solution on that.
thank you.

Who can shed some light on my ongoing connection problem. After upgrading my iPad Air with IOS 7.06, I could no longer connect to the internet. I have 2 MacBooks Air, 1 ipad mini and one iPhone 4S running on the same network, and they are all connected to

Who can shed some light on my ongoing connection problem.
After upgrading my iPad Air with IOS 7.06, I could no longer connect to the internet.
I have 2 MacBooks Air, 1 ipad mini and one iPhone 4S running on the same network, and they are all connected to the net and function well.
So I cleaned up the ipad completely, installed the latest firmware and reinstalled my apps : no connection.
I tried all things of resets and forgets. No result.
I have been fondling with my Airport Extreme 5 , but that did not help much.
This morning I went to a neighbor , hooked my ipad air on his network, typed the password and the thing all worked fine.
I have tried to connect the ipad air as an ethernet client, but that did not work. „Not enough power“ was the statement
Ideas anyone ?

Yes I tried this manyfold. But did not work. Reading on, I took Tesserac's advice. Shut down router and computer.
Start router after 15 minutes and wait another 10 minutes before starting the computer.
Et voila.... everything is back in working order,
Regards form Curacao, Dutch Caribean.
Pete van Linden

When I connect to my usual VPN connection, I can no longer connect to email, internet, etc.

Upgraded to Yosemite. When I connect to my usual VPN connection, I can no longer connect to email, internet, etc. Only happening on my MacBook Pro. My iMac works fine. Thoughts?

Richard, I think there's a solution. Found this on another support site:
..."There is a long discussion of the problem as it relates of iOS8 and OS10.10 here:
https://discussions.apple.com/thread/6555023?start=0&tstart=0"
..."DNS will no longer work with .local domains which do not advertise a SOA record"
..."Just simply add domain.local in the pane of Search Domains which is in Network / VPN / Advanced / DNS tab"
Did just that and now .local's resolve correctly. (make sure to restart the vpn connection to apply the new search).

How do i wipe my old phone if it can no longer connect to the internet? I enter my passcode and apple id, but 'verification fails' as there is no internet connection???

how do i wipe my old phone if it can no longer connect to the internet? I enter my passcode and apple id, but 'verification fails' as there is no internet connection???

Hi, JTCW33.
Thank you for visiting Apple Support Communities.
If you still have possession of the iPhone you wish to wipe, here are a couple articles that will walk you through the process.
What to do before selling or giving away your iPhone, iPad, or iPod touch
http://support.apple.com/kb/HT5661
iOS: Unable to update or restore
http://support.apple.com/kb/HT1808
If you no longer have access to your device, it will need to be connected to the Internet in order to remote wipe the device.
iCloud: Erase your device
http://support.apple.com/kb/ph2701
Cheers,
Jason H.

How can I deauthorize a computer that can no longer connect to the internet or is no longer working ?

How can I deauthorize Itunes on a computer that can no longer connect to the internet or is no longer working ?

You can't, which shouldn't be a problem unless you have 4 other computers authorized with the iTunes account and you need to authorize another.
Once you have authorized 5 computers, you can de-authorize all computere from a computer that is currently authorized followed re-authorizing the current active computers that need to be authorized.

Thinkpad Twist s230u: Can no Longer Connect to the Internet

Hello,
Several days ago my Lenovo Thinkpad Twist suddenly stopped connecting to the internet. I was at the cafe using my phone hotspot and everything was fine, but then when I got back home, it could not detect any wireless networks in my house. I thought it may have just been my wi-fi but my phone could connect to the wi-fi just fine. I tried plugging in my phone again for personal hotpot and it could detect my phone, but no longer connect to the internet (it'd say that it's connected, but no pages would load). I tried rebooting my computer, but the wireless networks still could not be found and my phone's hotspot could no longer help it connect to the internet. I tried a Malwarebytes Scan but that didn't detect anything, and my McAfee virus scanner is not gonna help me find anymore viruses (long story as to why I don't have a better virus protection).
Can't really install any updates since I can't connect to the internet at all...rebooted several times to no avail...
Any sort of help or ideas would be greatly appreciated! Thank you so much!
Sincerely,
Ingrid

I just started to have similar problem. I cannot connect to interent via ethernet or wifi. Both connections show I am connected, but cannot acces any web pages. It is like it is not connected. I would like to know how to restore back to when I bought it, 12/20/13, and then re-load the Windows 8 pro that is somewhere on the partition HD. Any help out there?????? All my other devices/laptops/computers work fine on the internet.
Stadtusquo
ingschan wrote:
Hello,
Several days ago my Lenovo Thinkpad Twist suddenly stopped connecting to the internet. I was at the cafe using my phone hotspot and everything was fine, but then when I got back home, it could not detect any wireless networks in my house. I thought it may have just been my wi-fi but my phone could connect to the wi-fi just fine. I tried plugging in my phone again for personal hotpot and it could detect my phone, but no longer connect to the internet (it'd say that it's connected, but no pages would load). I tried rebooting my computer, but the wireless networks still could not be found and my phone's hotspot could no longer help it connect to the internet. I tried a Malwarebytes Scan but that didn't detect anything, and my McAfee virus scanner is not gonna help me find anymore viruses (long story as to why I don't have a better virus protection).
Can't really install any updates since I can't connect to the internet at all...rebooted several times to no avail...
Any sort of help or ideas would be greatly appreciated! Thank you so much!
Sincerely,
Ingrid
ingschan wrote:
Hello,
Several days ago my Lenovo Thinkpad Twist suddenly stopped connecting to the internet. I was at the cafe using my phone hotspot and everything was fine, but then when I got back home, it could not detect any wireless networks in my house. I thought it may have just been my wi-fi but my phone could connect to the wi-fi just fine. I tried plugging in my phone again for personal hotpot and it could detect my phone, but no longer connect to the internet (it'd say that it's connected, but no pages would load). I tried rebooting my computer, but the wireless networks still could not be found and my phone's hotspot could no longer help it connect to the internet. I tried a Malwarebytes Scan but that didn't detect anything, and my McAfee virus scanner is not gonna help me find anymore viruses (long story as to why I don't have a better virus protection).
Can't really install any updates since I can't connect to the internet at all...rebooted several times to no avail...
Any sort of help or ideas would be greatly appreciated! Thank you so much!
Sincerely,
Ingrid

WRT54G ver. 6 can no longer connect to the internet after reset

I reset my WRT54G ver. 6 to clear the password, and now I can no longer connect to the internet with it. I can see the router itself from my PC, but that is all. I've followed the directions here for connection problems, but I can't seem to get an IP Address for it in the Web Configuration tool. Anybody have any thoughts?

Since you reset your router, you need to reconfigure it back again. try the online utility that automates the configuration. download Easy Link Connect utility at www.linksys.com/connect then download "Netset" and follow instructions.
if not Easy Link connect didnt work then you need to do the configuration manually.
1. check physical connection modem should be connected wired to internet port of the router then PC to numbered ports of the router.
2. Brighthouse i believe is cable connection, right? try power cycle your devices (turn off modem and router then turn on modem 1st then router next). check if your online.
3. if not. check PC ip. click "start" then "run" type in "cmd" then press "OK". the command prompt should pop-up. type "ipconfig" and check IP and gateway. you should be getting an ip: 192.168.1.x and gateway: 192.168.1.1
4. access router. open IE, then type in http://192.168.1.1 on address bar.
5. you will be prompted with username and PW. "admin" is the default password. on setup, just below are subtabs. select "MAC address clone". in it, set "mac clone" to "enable" then click on "clone" then "save settings".
6. power cycle devices again. try to go online
note: if you dont have latest firmware. try updating if needed
Message Edited by whodas on 11-07-200601:28 PM
it is EVIL enough for GOOD men do NOTHING.

Long Loadtime of Image (internet) Previews

Similar Messages

Maybe you are looking for