Long monitor cables... what do I need to use to connect across a room?
Hi,
I have an odd situation where I need to connect a PPC G5 to a couple of flat screen Dell monitors about 15 feet away, and then a Dell computer to two other Dell monitors that are also several feet away.
So two computers, each CPU connected to two monitors across the room from each other. The two CPUs don't interact at all... this is just for the monitors.
Are there cables this long? And do they make them for the Mac? And what would be the term for that... AVI? I usually just use the cables that come with the monitors and that's it, so I don't know the names for the connections at all.
Sorry,
The Dell monitors are 1908FP and P170S.
My G5 has one of each kind of connector plus one adaptor.
So, Do I look for a 10'+ cable with DVI to DVI? Or DVI to VGA? That's what I need to know and can't quite figure out.
Similar Messages
-
27 inch iMac to a 29 inch Dell Ultrasharp U2913WM monitor. What do I need to hook these two up?
Welcome to Apple Support Communities
That monitor has got a lot of ports you can use. The easiest and cheapest way to connect the iMac to the Dell monitor is through a Mini DisplayPort cable, because you do not need any adapter.
Another way you have is to connect it through HDMI. In this case, you need a Mini DisplayPort to HDMI adapter and a HDMI cable -
I'm about to buy a 27" i-Mac. I would like to connect my 30" Cinema Display to it as a second monitor. What will I need to do that? Will this slow down the overall performance?
The new iMacs do not come with a MiniDisplayPort, they have Thunderbolt, so unless you are talking about purchasing one of the previous generation iMacs such as this refurbished model in the online Apple store, it won't work. And yes, if you are going to get the full range of video resolutions you will need the Dual-Link version.
For details see the store's web page on the Dual-Link display adapter. -
I have been using a WD Passport with Time Machine on my iMac. Since I upgraded to Mavericks, the backup no longer works. What do I need to do?
I assume that upgrading the WD SmartWare is irrelevant as it is not being used. Should I upgrade just as a precaution?
One complication is that I have renamed my user since the last time I backed up.the problem is with the WD Passport drives. I also have one, and since upgrading to 10.9 I can no longer use mine either. See if this solution works for you: https://discussions.apple.com/message/23943103#23943103
-
what cable do i need to use to connect my grandson's old style external isight webcam to his 2014 Mac mini in order for him to be able to FaceTime me
You need either a FireWire 800 to FW 400 cable or a FR 800 (male)/FW(female) adopter.
However. it the Mini (note that you still have the late 2012 Mini, Apple has not updated the Mini since then) has Mavericks it may not work satisfactorily. I tried it on my 2102 and I get abount 1 frame every 20 seconds. Another uses posted same problem.
However, it it work fine on my late 2009 Mini with Mavericks -
My early 2009 Mac Pro does not connect via bluetooth to my sound bar or bluetooth mini speakers. Both my wireless keyboard and mouse have no problems connecting. What do I need to do to connect to external bluetooth devices?
I would always have a wired keyboard and mouse on hand (need not be expensive ... any cheap wired devices will work). "Emergency recovery" procedures can activate features in random order, so the opportunity to select a recovery partition may pass before the wireless devices are recognized.
That will let you select the "turn on Bluetooth" icon. -
In what case, we need to use PI for vendor replication in MM-SUS?
Dear Experts,
In what scenarios, we need to use or configure the PI settings for vendor replication between MM and SUS? The SAP configuration guide for SRM 7.01 mentions about the PI settings for vendor replication from ECC to SUS.
However, we are able to replicate the vendor from ECC to SUS using the program BBPGETVD in SUS client?
In what circumstances, we need to configure the PI settings for vendor replication when we are able to do so in a much simpler way?
Thanks in advance,
Ranjan
Ranjan SutradharHi Ranjan,
In all circumstances you need to replicate vendors from MM to SUS via PI. BBPGETVD is not the right way to replicate vendors to SUS because the information like vendor class, assignment of this vendor class to an object and the vendor classification cannot be transferred via BBPGETVD.
Hence you will have to use PI. You can try sending a PO from MM to SUS and the PO will fail in SUS with a message like 'Vendor not present in SUS' if you use BBPGETVD.
Regards,
Nikhil -
What do I need to use sun.jdbc.odbc.jdbcOdbcDriver
hi there
what do I need to use sun.jdbc.odbc.jdbcOdbcDriver to access MS Access database?
String sourceURL = "jdbc:odbc:mysource";
String sqlQuery = "select ComsumerAccountNumber from EDS5";
//getting a connection
try {
Class.forName(driverName);
Connection databaseConnection = DriverManager.getConnection(sourceURL);
Statement statement = databaseConnection.createStatement();
ResultSet rs = statement.executeQuery(sqlQuery);
while(rs.next()){
...some code to do with the results
catch (ClassNotFoundException cnfe) {
System.err.println(cnfe.getMessage());
catch (SQLException sqle) {
System.err.println(sqle.getMessage());}
I got error and caught it in catch( classnotfoundexception). no driver. is this the correct way to use a driver. I have created a data source.make sure the driverName is "sun.jdbc.odbc.JdbcOdbcDriver"
I noticed you typed in your message "sun.jdbc.odbc.jdbcOdbcDriver" with a lowercase 'j' -
Does anyone know what converter i need to use to watch a dvd film on my phone
does anyone know what converter i need to use to watch a dvd film on my phone
Moveis/tv shows etc that you buy on DVD are encrypted to stop you from doing this. Breaking this encryption is against the law. We cannot help you break the law here.
Sorry. -
What do I need to use iphone and macbook air in europe
What do I need to use iphone 4 and macbook air in europe?
Hello Bev23,
Thank you for posting in the Apple Support Communities. To charge your devices, you will need adapters for the country you are in. We sell a Apple World Travel Adapter Kit that will work with several different countries and will work with both your MacBook Air and iPhone:
Apple World Travel Adapter Kit
http://store.apple.com/us/product/MB974ZM/B/apple-world-travel-adapter-kit
You can also find information about wireless carrier support for using your iPhone in the article below. You may need to contact your wireless carrier for more information about using your iPhone abroad:
iPhone: Wireless carrier support and features
http://support.apple.com/kb/HT1937
Have a safe trip!
Best,
Sheila M. -
What plug adapter do I use to connect the new Macbook USB-C port to a cinema display?
What plug adapter do I use to connect the new Macbook USB-C port to a cinema display?
If you intend to connect your 2008 display to the new macbook then you will need a USB-C VGA Multiport Adapter ($79) as well as a mini display port to VGA port adapter ($29) and also a VGA-VGA Standard 15-Pin VGA Male to VGA Male Cable ($5).
http://store.apple.com/us/product/MJ1L2AM/A/usb-c-vga-multiport-adapter
http://store.apple.com/us/product/MB572Z/B/mini-displayport-to-vga-adapter
http://www.amazon.com/VGA-VGA-Standard-15-Pin-Male-Cable/dp/B0002AHT0M
The 2008 old cinema analogue Apple Cinema Displays were mostly pre-quipped with a mini display port rather than a VGA or HDMI port. So you will have to connect the mini display port to VGA port adapter to your 2008 ACD and the USB-C VGA Multiport Adapter to your new macbook and connect the two female VGA ports with a VGA-VGA Standard 15-Pin VGA Male to VGA Male Cable.
But I can't guarantee though that the above setup will work for your new macbook and your 2008 Apple Cinema Display. You should double check with Apple support regarding my suggestion. Just let me know....... -
What I.Link wire is used to connect my Sony Handy Cam to my iMac Mountain Lion?
What I.Link wire is used to connect my Sony Handy Cam to my iMac Mountain Lion?
Hi,
If I remember correctly it is some while since Sony used iLink (Firewire) which would mean it is Firewire 400.
This would be the smaller 6 pin at the camera end and a 400 9 pin one at the "computer" end.
However we would now be looking at needing a 400 to 800 adaptor/link cable for newer computers.
http://en.wikipedia.org/wiki/IEEE_1394
9:30 pm Friday; February 14, 2014
iMac 2.5Ghz 5i 2011 (Mavericks 10.9)
G4/1GhzDual MDD (Leopard 10.5.8)
MacBookPro 2Gb (Snow Leopard 10.6.8)
Mac OS X (10.6.8),
Couple of iPhones and an iPad -
When FF starts, the file, edit, etc line is not displayed. What do I need to do to display this line?
Bill
== This happened ==
Every time Firefox opened
== I upgraded to FF 3.6'''''"...the file, edit, etc line is not displayed"''''': That's the Menu Bar; see below.
<u>'''Can't see the Menu Bar'''</u> (File, Edit, View, History, Bookmarks, Tools, Help)?
Turning the Menu Bar on and off is a new feature in version 3.6.
''(~~red:Linux & OSX see~~: [[Menu bar is missing]] )''
<u>''Windows'' Method 1.</u> '''''Hold down''''' the key and press the following letters in this exact order: V T M then release the key
<u>''Windows'' Method 2.</u> Tap once on the F10 key, while the Menu bar is visible, choose "View > Toolbars", click "Menu Bar" so that a check mark is placed next to Menu Bar
<u>''Windows'' Method 3.</u> Tap once and release the key. The Menu Bar will be displayed; then choose ~~red:V~~iew > ~~red:T~~oolbars and click on ~~red:M~~enu Bar so that a check mark is placed next to Menu Bar
The Menu Bar should now be displayed permanently, unless you turn it off again using View > Toolbars. Check mark = displayed, NO check mark = not displayed.
See:
http://support.mozilla.com/en-US/kb/Menu+bar+is+missing
http://kb.mozillazine.org/Toolbar_customization#Restoring_missing_menu_or_other_toolbars
<u>'''Navigation Toolbar, Bookmarks Toolbar and other Toolbars'''</u> under View > Toolbars. Clicking on one of them will place a check mark (display) or remove the check mark (not displayed).
<u>'''To display the Status Bar'''</u>, View, then click Status bar to place a check mark (display) or remove the check mark (not displayed).
<u>'''Full Screen mode'''</u>
http://kb.mozillazine.org/Netbooks#Full_screen
Also see:
''' [[Back and forward or other toolbar buttons are missing]]'''
'''[[Navigation Toolbar items]]'''
'''[http://support.mozilla.com/en-US/kb/How+to+customize+the+toolbar How to customize the toolbar]''' -
What do I need to open a connection from the Linux box to the Oracle server
Hi all,
I want to access oracle database from java application running on Linux.
The database is installed on a Window 2000 machine. What do I need to install before I can open a connection from the Linux box to the Oracle server on Windows 2000 ?
Do I need Oracle Client ?
Thanks,
QuoiHi Quoi,
http://myjdbc.tripod.com/basic/jdbcurl.html
Talks abt how to write a jdbc url and the jar + config required to connect to db. Also has a sample program to connect.
Regards
Elango. -
What do I need to do to connect over rtmpf?
I can do this:
var test:NetConnection = new NetConnection(); trace('trying to connect'); test.connect("rtmp://[server]/chat"); test.addEventListener(NetStatusEvent.NET_STATUS,function(event:NetStatusEvent):void { trace(event.info.code); });
And get NetConnection.Connect.Success
But when I do this:
var test:NetConnection = new NetConnection(); trace('trying to connect'); test.connect("rtmfp://[server]/chat"); test.addEventListener(NetStatusEvent.NET_STATUS,function(event:NetStatusEvent):void { trace(event.info.code); });
It fails after a long time.
I'm connecting to my own Adobe Media Server v.5.0.3. All TCP and UDP ports are open.
RTMFP enable is set to true in [ams root]\conf\_defaultRoot_\Adaptor.xml
http://cc.rtmfp.net/ gives me back:
no
yes
yes
no
no
yes
yes
yesDo you have a Retina display MBP? They're the ones that come without FW and need the use of an adapter. If you bought a standard-screen MBP then you have a FW800 connector built in.
You're profile only shows "MacBook Pro" - that's why I'm asking...
Clinton
Maybe you are looking for
-
My ipod wont let me download an app without putting credit card info first
Please help!!!
-
Problems setting up HH3 to Belkin N1 via TP-Link T...
I am setting up a wireless set up in an out building by running the HH3 via a TP-Link TL-PA211KIT to a Belkin N1. All goes to plan but the Belkin is very intermittent and is not reliable. I have had a look at allot of advice for setting up the Belkin
-
Monitoring in an Enterprise SOA envrionment
Hi, we're implementing enterprise soa like applications in a increasingly higher rate at our company. Using many different SAP products and non-SAP products we're offering end users relatively simple applications based upon a rather complex environme
-
Date and Time since 1900 Jan 1st
I have a cell with the number of days since Jan 1, 1900. How would I display or convert this to a date and time. 3599.4495424 to any date and time format. Thanks
-
3D bar charts export as jagged PDFs - how can I make them smooth?
I want to export my 3D bar charts as PDFs, but they export without anti-aliasing or smooth vector lines. The bars are jaggy, not clean. How can I make them higher quality? I've checked my system settings and those in Acrobat 7 Professional, the 'smoo