Long running Process chain for less Number of records

Hello Experts,
I have a problem with a process chain which is taking very long time ( To load around 20 records)
Problem Description:
1) I have one base ODS and First level ODS and the data uo to this point is loaded with out any problem.
2) When the data is moving from First level ODS to the Cube to load 20 records it is taking around 5 hrs of time and the load is successful.
3) If I see the DTP monitor the exraction step from DSO to Cube is taking around 4.50 min
4) The remaining stpes are like Error handling, transformations, updation are taking normal times (Around 5 secs).
Could any one please help me to find out where the exact problem lies to make this extraction step so long time.
Regards,

Please check for start routines, field level routines. From DSO to Cube check for transformation. How each and every field is getting updated and you will be able to track the time taken for the load.
thanks,

Similar Messages

Long running process chains - No Dump / error message.

Hello,
We have defined some steps in process chain that contains default macros. We mainly included that to ensure calculations happens even when users dont open or access the DP Planning book.
Issue is, these steps are running endless. normally it takes some 400 n odd seconds. But its running for the last 60000 secs.
No. of Planning objects or CVC is 2027 only. I had to cancel them and tried to re run this step or the whole chain no luck....
I have checked active jobs in SM37, there is none. So ideally there is no load on the system. Also no change to Macro or CVC's has been done. there was only one Transport that was moved and it was on the product master.
Also I have done the time series, Live cache, PA Consistency checks. only in Live Cache there was some Superflous time series and it was corrected.
I am not getting a clue of why its happening nor where to start the analsysis.
Any help or suggestion is greatly appreciated.
Currently I have made the subsequent events as independent,& the chain is running execpting this step.
Many Thanks
Aswath Ram.

Thanks for the reply,
These are custom macros. It adds two KF and copies to another.
The no. of periods is 24 time periods and roughly no. of CVC is 2100.
Another thing, this process chain has been running for last 5 to 6 months with no issues. Since sunday, its messing up....
I am doubting if its taking time read data from table or live cache. or is it because of some indexing. Not sure how to check that.
have asked Basis to check the system performance, if it might cause this issue.
Many Thanks
Aswath

Should clients of long-running processes wait for a response?

I am a bit confused by the worklist tutorial where the client waits around for
a response from the worklist process that blocks on human input. This may be okay
for the sample application, but is it a realistic scenario? Have you designed
any practical worklist processes this way? I would have thought that the client
of a worklist process would simply trigger the process and go away. Eventually
when the human involved in the process would take some action, the process would
then, for example, send a message to some application. What do you think? I would
be interested in your opinions and perhaps some real examples of how you are using
worklists.
Thanks.
P.S. Is it even possible for a worklist client to trigger the process and go away?
Would the process die because the client has gone out of scope?

I agree with your comments. In being honest as well, we unfortunately do have SRs that get behind or missed. It's very frustrating on our side as well when we have these come up. We have implemented a number of technologies and also human touch to help us catch these and continue to focus on ways to overcome these delays. I know it's frustrating for you as well.
Our customer satisfaction is very high and actually continues to increase each Qtr. Our data shows us our three key satisfaction areas are; speed of response, speed of resolution and followup.
Chat support helps us in response time, but sometimes may hinder us in resolution times. Especially with more complex issues. Our goals were not to totally replace the phones with chats, but to use chat to allow us to respond more quickly, which it has done. We're now focusing our folks to realize it's still ok to call you when the Chat is hindering resolution and it would be quicker to talk live about the issue.
We resolve over half of the SRs on the first day. We continue to focus on speeding up the resolution of those that go beyond the first day. A couple things we've implemented are we call you back at least every 2 days when the SR is in Novell's court and at least every 5 days when it's in your court. We've also implemented timed escalation for SRs and are now looking at also escalating when progress is not being made after a certain number of days (rather that just time open). The goal is to get you in the hands of the right person asap to speed up the resolution time.
We're also having Managers call you on more and more SRs before being closed to double check your satisfaction with the SR.
Our dream is to never have you need to ask us for attention on a SR. We continue to make progress on it.
I look forward to your thoughts and other ideas you may have to help us improve,
-Todd
Todd Abney
Technical Support Director
Novell

BI Loading for Infoobject : Number of records

Hi Experts,
When i am loading the data from DS 0wbs_elemt_attr to Infoobject 0wbs_elemt, in rsa3 there are 102117 number of records. but when i run the infopackge i see the number of records are 102035. I would like to know if there are any checkpoints to check as to where should I check for less number of records that are coming up.
Kindly advise.
thanks & regards,
M.S

Hi experts,
I deleted everything and reloaded. It is now reflecting 1020117 number of records(dont know how).
Thankyou guys for your help. Assigned points.
thanks & regards,
M.S
Edited by: M.S on May 7, 2010 12:14 PM

ORABPEL-05002 for long running process

Hi everybody,
My question is related with a long running process I have designed and which, after running for a couple of days, ends by reporting the ORABPEL-05002 error:
===============================================================
ORABPEL-05002
Message handle error.
An exception occurred while attempting to process the message "com.collaxa.cube.engine.dispatch.message.instance.PerformMessage"; the exception is: Transaction was rolled back: timed out; nested exception is: java.rmi.RemoteException: No Exception - originate from:java.lang.Exception: No Exception - originate from:; nested exception is:
     java.lang.Exception: No Exception - originate from:
     at com.collaxa.cube.engine.dispatch.DispatchHelper.handleMessage(DispatchHelper.java:152)
     at com.collaxa.cube.engine.dispatch.BaseScheduledWorker.process(BaseScheduledWorker.java:70)
     at com.collaxa.cube.engine.ejb.impl.WorkerBean.onMessage(WorkerBean.java:86)
     at com.evermind.server.ejb.MessageDrivenBeanInvocation.run(MessageDrivenBeanInvocation.java:123)
     at com.evermind.server.ejb.MessageDrivenHome.onMessage(MessageDrivenHome.java:755)
     at com.evermind.server.ejb.MessageDrivenHome.run(MessageDrivenHome.java:928)
     at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:186)
     at java.lang.Thread.run(Thread.java:534)
===============================================================
Looking in the Manual Recovery screen, I can see an Activity I can recover. It's about an assign Activity where I'm doing a single boolean assignation.
Of course, together with the ORABPEL-05002 error I got also the 'Transaction was rolled back: time out' message. Note that I have modified the transaction-timeout value to 180000. The error occurs during the night, with no heavy load of the server.
Recovering the assign activity brings back the process in the running state.
My process pattern:
while (1 == 1) {
do activity;
wait_timeout();
So, I have the following questions:
1. Which is cause of this error?
2. How may I automatically recover this lost activity? RecoveryAgent?
Any suggestion is appreciated.
Regards,
amo
P.S: the full stack of error messages reported in domain.log:
===============================================================
<2006-09-18 08:08:34,101> <ERROR> <SRH.collaxa.cube.engine.dispatch> <DispatchHelper::handleMessage> failed to handle message
javax.ejb.EJBException: Transaction was rolled back: timed out; nested exception is: java.rmi.RemoteException: No Exception - originate from:java.lang.Exception: No Exception - originate from:; nested exception is:
     java.lang.Exception: No Exception - originate from:
java.rmi.RemoteException: No Exception - originate from:java.lang.Exception: No Exception - originate from:; nested exception is:
     java.lang.Exception: No Exception - originate from:
     at com.evermind.server.ejb.EJBUtils.makeException(EJBUtils.java:873)
     at ICubeEngineLocalBean_StatelessSessionBeanWrapper0.handleWorkItem(ICubeEngineLocalBean_StatelessSessionBeanWrapper0.java:1479)
     at com.collaxa.cube.engine.dispatch.message.instance.PerformMessageHandler.handle(PerformMessageHandler.java:45)
     at com.collaxa.cube.engine.dispatch.DispatchHelper.handleMessage(DispatchHelper.java:125)
     at com.collaxa.cube.engine.dispatch.BaseScheduledWorker.process(BaseScheduledWorker.java:70)
     at com.collaxa.cube.engine.ejb.impl.WorkerBean.onMessage(WorkerBean.java:86)
     at com.evermind.server.ejb.MessageDrivenBeanInvocation.run(MessageDrivenBeanInvocation.java:123)
     at com.evermind.server.ejb.MessageDrivenHome.onMessage(MessageDrivenHome.java:755)
     at com.evermind.server.ejb.MessageDrivenHome.run(MessageDrivenHome.java:928)
     at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:186)
     at java.lang.Thread.run(Thread.java:534)
Caused by: java.lang.Exception: No Exception - originate from:
     at com.evermind.server.ejb.EJBUtils.makeException(EJBUtils.java:871)
     ... 10 more
javax.ejb.EJBException: Transaction was rolled back: timed out; nested exception is: java.rmi.RemoteException: No Exception - originate from:java.lang.Exception: No Exception - originate from:; nested exception is:
     java.lang.Exception: No Exception - originate from:
     at ICubeEngineLocalBean_StatelessSessionBeanWrapper0.handleWorkItem(ICubeEngineLocalBean_StatelessSessionBeanWrapper0.java:1479)
     at com.collaxa.cube.engine.dispatch.message.instance.PerformMessageHandler.handle(PerformMessageHandler.java:45)
     at com.collaxa.cube.engine.dispatch.DispatchHelper.handleMessage(DispatchHelper.java:125)
     at com.collaxa.cube.engine.dispatch.BaseScheduledWorker.process(BaseScheduledWorker.java:70)
     at com.collaxa.cube.engine.ejb.impl.WorkerBean.onMessage(WorkerBean.java:86)
     at com.evermind.server.ejb.MessageDrivenBeanInvocation.run(MessageDrivenBeanInvocation.java:123)
     at com.evermind.server.ejb.MessageDrivenHome.onMessage(MessageDrivenHome.java:755)
     at com.evermind.server.ejb.MessageDrivenHome.run(MessageDrivenHome.java:928)
     at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:186)
     at java.lang.Thread.run(Thread.java:534)
<2006-09-18 08:08:34,129> <ERROR> <SRH.collaxa.cube.engine.dispatch> <BaseScheduledWorker::process> Failed to handle dispatch message ... exception ORABPEL-05002
Message handle error.
An exception occurred while attempting to process the message "com.collaxa.cube.engine.dispatch.message.instance.PerformMessage"; the exception is: Transaction was rolled back: timed out; nested exception is: java.rmi.RemoteException: No Exception - originate from:java.lang.Exception: No Exception - originate from:; nested exception is:
     java.lang.Exception: No Exception - originate from:
ORABPEL-05002
Message handle error.
An exception occurred while attempting to process the message "com.collaxa.cube.engine.dispatch.message.instance.PerformMessage"; the exception is: Transaction was rolled back: timed out; nested exception is: java.rmi.RemoteException: No Exception - originate from:java.lang.Exception: No Exception - originate from:; nested exception is:
     java.lang.Exception: No Exception - originate from:
     at com.collaxa.cube.engine.dispatch.DispatchHelper.handleMessage(DispatchHelper.java:152)
     at com.collaxa.cube.engine.dispatch.BaseScheduledWorker.process(BaseScheduledWorker.java:70)
     at com.collaxa.cube.engine.ejb.impl.WorkerBean.onMessage(WorkerBean.java:86)
     at com.evermind.server.ejb.MessageDrivenBeanInvocation.run(MessageDrivenBeanInvocation.java:123)
     at com.evermind.server.ejb.MessageDrivenHome.onMessage(MessageDrivenHome.java:755)
     at com.evermind.server.ejb.MessageDrivenHome.run(MessageDrivenHome.java:928)
     at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:186)
     at java.lang.Thread.run(Thread.java:534)
<2006-09-18 08:09:05,236> <ERROR> <SRH.collaxa.cube> <BaseCubeSessionBean::logError> Error while invoking bean "activity manager": Scope not found.
The scope "BpSwt2.30995" has not been defined in the current instance.
ORABPEL-02094
Scope not found.
The scope "BpSwt2.30995" has not been defined in the current instance.
     at com.collaxa.cube.engine.core.ScopeContext.getScope(ScopeContext.java:213)
     at com.collaxa.cube.engine.core.WorkItem.setCubeInstance(WorkItem.java:259)
     at com.collaxa.cube.engine.core.WorkItemFactory.init(WorkItemFactory.java:68)
     at com.collaxa.cube.engine.core.WorkItemFactory.create(WorkItemFactory.java:58)
     at com.collaxa.cube.engine.adaptors.common.BaseWorkItemPersistenceAdaptor.load(BaseWorkItemPersistenceAdaptor.java:147)
     at com.collaxa.cube.engine.data.WorkItemPersistenceMgr.load(WorkItemPersistenceMgr.java:75)
     at com.collaxa.cube.engine.CubeEngine.load(CubeEngine.java:5185)
     at com.collaxa.cube.engine.CubeEngine.load(CubeEngine.java:5173)
     at com.collaxa.cube.engine.CubeEngine.expireActivity(CubeEngine.java:2136)
     at com.collaxa.cube.ejb.impl.ActivityManagerBean.expireActivity(ActivityManagerBean.java:145)
     at com.collaxa.cube.ejb.impl.ActivityManagerBean.expireActivity(ActivityManagerBean.java:116)
     at IActivityManagerLocalBean_StatelessSessionBeanWrapper52.expireActivity(IActivityManagerLocalBean_StatelessSessionBeanWrapper52.java:645)
     at com.collaxa.cube.engine.dispatch.message.instance.ExpirationMessageHandler.handle(ExpirationMessageHandler.java:43)
     at com.collaxa.cube.engine.dispatch.DispatchHelper.handleMessage(DispatchHelper.java:125)
     at com.collaxa.cube.engine.dispatch.BaseScheduledWorker.process(BaseScheduledWorker.java:70)
     at com.collaxa.cube.engine.ejb.impl.WorkerBean.onMessage(WorkerBean.java:86)
     at com.evermind.server.ejb.MessageDrivenBeanInvocation.run(MessageDrivenBeanInvocation.java:123)
     at com.evermind.server.ejb.MessageDrivenHome.onMessage(MessageDrivenHome.java:755)
     at com.evermind.server.ejb.MessageDrivenHome.run(MessageDrivenHome.java:928)
     at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:186)
     at java.lang.Thread.run(Thread.java:534)
<2006-09-18 08:09:05,274> <ERROR> <SRH.collaxa.cube.engine.dispatch> <DispatchHelper::handleMessage> failed to handle message
ORABPEL-02094
Scope not found.
The scope "BpSwt2.30995" has not been defined in the current instance.
     at com.collaxa.cube.engine.core.ScopeContext.getScope(ScopeContext.java:213)
     at com.collaxa.cube.engine.core.WorkItem.setCubeInstance(WorkItem.java:259)
     at com.collaxa.cube.engine.core.WorkItemFactory.init(WorkItemFactory.java:68)
     at com.collaxa.cube.engine.core.WorkItemFactory.create(WorkItemFactory.java:58)
     at com.collaxa.cube.engine.adaptors.common.BaseWorkItemPersistenceAdaptor.load(BaseWorkItemPersistenceAdaptor.java:147)
     at com.collaxa.cube.engine.data.WorkItemPersistenceMgr.load(WorkItemPersistenceMgr.java:75)
     at com.collaxa.cube.engine.CubeEngine.load(CubeEngine.java:5185)
     at com.collaxa.cube.engine.CubeEngine.load(CubeEngine.java:5173)
     at com.collaxa.cube.engine.CubeEngine.expireActivity(CubeEngine.java:2136)
     at com.collaxa.cube.ejb.impl.ActivityManagerBean.expireActivity(ActivityManagerBean.java:145)
     at com.collaxa.cube.ejb.impl.ActivityManagerBean.expireActivity(ActivityManagerBean.java:116)
     at IActivityManagerLocalBean_StatelessSessionBeanWrapper52.expireActivity(IActivityManagerLocalBean_StatelessSessionBeanWrapper52.java:645)
     at com.collaxa.cube.engine.dispatch.message.instance.ExpirationMessageHandler.handle(ExpirationMessageHandler.java:43)
     at com.collaxa.cube.engine.dispatch.DispatchHelper.handleMessage(DispatchHelper.java:125)
     at com.collaxa.cube.engine.dispatch.BaseScheduledWorker.process(BaseScheduledWorker.java:70)
     at com.collaxa.cube.engine.ejb.impl.WorkerBean.onMessage(WorkerBean.java:86)
     at com.evermind.server.ejb.MessageDrivenBeanInvocation.run(MessageDrivenBeanInvocation.java:123)
     at com.evermind.server.ejb.MessageDrivenHome.onMessage(MessageDrivenHome.java:755)
     at com.evermind.server.ejb.MessageDrivenHome.run(MessageDrivenHome.java:928)
     at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:186)
     at java.lang.Thread.run(Thread.java:534)
<2006-09-18 08:09:05,275> <ERROR> <SRH.collaxa.cube.engine.dispatch> <BaseScheduledWorker::process> Failed to handle dispatch message ... exception ORABPEL-05002
Message handle error.
An exception occurred while attempting to process the message "com.collaxa.cube.engine.dispatch.message.instance.ExpirationMessage"; the exception is: Scope not found.
The scope "BpSwt2.30995" has not been defined in the current instance.
ORABPEL-05002
Message handle error.
An exception occurred while attempting to process the message "com.collaxa.cube.engine.dispatch.message.instance.ExpirationMessage"; the exception is: Scope not found.
The scope "BpSwt2.30995" has not been defined in the current instance.
     at com.collaxa.cube.engine.dispatch.DispatchHelper.handleMessage(DispatchHelper.java:152)
     at com.collaxa.cube.engine.dispatch.BaseScheduledWorker.process(BaseScheduledWorker.java:70)
     at com.collaxa.cube.engine.ejb.impl.WorkerBean.onMessage(WorkerBean.java:86)
     at com.evermind.server.ejb.MessageDrivenBeanInvocation.run(MessageDrivenBeanInvocation.java:123)
     at com.evermind.server.ejb.MessageDrivenHome.onMessage(MessageDrivenHome.java:755)
     at com.evermind.server.ejb.MessageDrivenHome.run(MessageDrivenHome.java:928)
     at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:186)
     at java.lang.Thread.run(Thread.java:534)
===============================================================

These are the possible cause to the problem and their solutions:
Poor performance of the dehydration database If you are using Oracle Lite as dehydration store, please switch to use Oracle 9i or 10g. If Oracle 9i/10g is already in use, check the database parameter 'process' and 'session' to make sure it can handle the expected throughput.
OC4J has too few available connections to the dehydration database. Increase the maxConnection number of the BPELServerDataSource at the BPEL_HOME/integration/orabpel/system/appserver/oc4j/j2ee/home/config/data-sources.xml (for developer edition) or IAS_HOME/j2ee/OC4J_BPEL/config/data-sources.xml (mid-tier installation).
Size of message is too big Two ways to deal with this problem:
Increase the transaction timeout at PEL_HOME/integration/orabpel/system/appserver/oc4j/j2ee/home/config/server.xml (developer edition) or IAS_HOME/j2ee/OC4J_BPEL/config/server.xml (mid-tier installation)
Decrease the auditLevel from BPELConsole -> Manage BPEL Domain -> Configurations tab. Doing so will reduce the amount of data saved to the dehydration store.
Cheers
Anirudh Pucha

ProgressIndicator and hourglass for long running processes

Hi all,
Iam using Oracle ADF 10g with EJBs.
I have a long running process for which I want to give the user an indication of its progress. The process is run upon clicking a submit button.
I have tested the use of the combination of progressIndicator + poll according to the example of Gerger consulting( http://gergerconsulting.blogspot.com/2007/04/adf-faces-progressindicator-example-for.html) but it did not work. The problem is that my long running process hangs the page and the progress bar does not work until the process has finished.
I have seen a similar post in this foum (Re: How to run long background jobs in ADF applications where a user complains that there is not an Oracle method for running asynchronous processes from Oracle ADF.
I've tested to isolate my asynchronous process with the progressIndicator + poll in a single ADF page. The process is being activated from an invokeAction from the executables of the pagedef file. But again the process hangs the page and the progressIndicator does not display at all.
So I have abandoned the idea of the progress indicator and Iam thinking of using an hourglass.
Is there an example or guidelines of how I can do it?

Thanks John for your reply,
Iam still working on the progressIndicator. I have read the discussion thoroughly quite many times.
One thing I have not yet figured out from your discussion is how you manage to create the long-running-process thread within an action method within the managed bean and make the thread still be active, while the parent action method has finished.
Usually the managed beans attached to a .jspx pages has request scope. So a commandButton's action method (that will spawn the long running thread) will finish much earlier than the thread and it will kill the thread.
Thanks,
Dimitris

CORUPROC (Process chain for confirmation, collective background processing)

Hello Guru,
Can you please explain me the program CORUPROC (Process chain for confirmation, collective background processing) that can be use in SE38. and how it its important for CO16N (Reprocessing Incorrect Production Order)?
CORUPROC is also the same as CO1P transaction code.
Please explain the use of this program.
Thanks
Edited by: Ryan on Feb 3, 2009 7:55 AM

Hi Carina,
It might take some time for the attribute change run.
what you can do is right click on th running process , go to display messages and check if every thing is fine.
also goto batch monitor from there and see if the job is still running.
alternatively, if you are not sure if the job got strucked up, kill the job from batch monitor and run the attribute change run manually.
you got two options two do now.
1)Wait for some time for the process to complete and check the messages.
2)kill the job and run att change run manually.
i suggest you to go for option 1 and if it is taking too long ar there is any error message, analyze and then go for option 2
hope this helps.
cheers,
Srinath.
Edited by: Srinath Singamsetti on Aug 4, 2009 5:44 AM

To find the Person who run Process Chain lastly

Dear All,
How can I find the last person who has run the process chain? is there any table or program?
Best answer receives reward points.
Cheers,

Hello,
Last Modification
You can see that information in RSPC, enter in the chain that you want to see who was the last modification user, and there is a button that shows that information.
All Modifications
Or you can see the log in RSPC and see the modifications done to the a chain.
SUIM
SUIM is a powerful tool that comes in quite handy for the IT when working with roles and authorizations.
It will not deliver the last modification user of a process chain, for sure.
Regards,
Jorge Diogo

Run process chain on last three days of the month

Hello
I need to run process chain on last three days of the month. For example , It should run on 28, 29 and 30th dates of June.
There is no option to put a code in the start process of the process chain.
I can run it every day and put a code in the infopackage/DTP so that empty load (0 records) will be done on other days.
This doesnt sound as a good option.
Do u know any other options?

Hi
See the code and details how to do it, and change the code as per your requirement.
http://wiki.sdn.sap.com/wiki/display/profile/Surendra+Reddy
Triggering the Process Chains at Particular Date using Events
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/business-intelligence/s-u/triggering%20%20the%20process%20chains%20at%20particular%20date%20using%20events.pdf
BI-ABAP (Trigger Process Chains on evry month 3rd and 4th day).
https://wiki.sdn.sap.com/wiki/pages/viewpage.action?pageId=81428842
Thanks
Reddy

Problem in creating process chains for CO

Hi Friends,
                 I have a CO cube "0OPA_C11" getting data from Three datasources,
those are 0CO_OM_OPA_6(supports delta), 0CO_OM_OPA_1(full only), 0CO_OM_OPA_2(full only), i have already created process chain to this cube using these three datasources, the chain is like this,
1. delete indexes
2.0CO_OM_OPA_6(supports delta
3.0CO_OM_OPA_1(full only),
4.0CO_OM_OPA_1(request overlapping)
5.0CO_OM_OPA_2(full only),
6.0CO_OM_OPA_2(request overlapping)
7.create indexes
        Is it right? here the chain is running, after completion of that, in manage of cube, it is showing only the request for 0CO_OM_OPA_2(full only), the request which were there earlier like Init request and new delta request for .0CO_OM_OPA_6, full request for 0CO_OM_OPA_1 are getting deleted, it is showing the request only for 0CO_OM_OPA_2,
the way how i created the process chain is right or wrong? can anybody give me the solution?
Thanx in Advance
BalajiReddy

Hi Nick,
          Thanx for your reply, everthing is ok what you've asked me to check, i think there is certain scenario to create the process chains for the data targets, which are getting data from multiple datasources, which support delta's as well as full.
          I want that scenario, can you tell me? or can anybody tell me?
The right points are assigned to the right answers.
Thanx in advance
balajireddy

How to run process chain in day of 20 and 2 every month?

Dear all,
I have to run process chain in day of 20 and 2 every month,but the settting of PC just allow Scheduled start every month once
time.
Please tell me the way of setting process chain.
Thanks.

Hi,
(1) Create an event in the BW system
Define a system event (for example SAP_BW_TRIGGER) with Transaction SM62. Lets says it is "EVENTX". Use this even in the Process chain and execute the process chain as repeative job.
(2) Use the below lines of code in the program for calling a Fucntion which trigeres the event created above . Here in this program you will call the the Below FM if and only id the sy-datum is 20 th or 2nd of the month ( as mentioned by our friend suggested).
call function 'BP_EVENT_RAISE'
exporting
eventid = EVENTX
exceptions
bad_eventid = 1
eventid_does_not_exist = 2
eventid_missing = 3
raise_failed = 4
others = 5.
endfunction.
Regards,
Anil Kumar Sharma .P

In forms how to cancel long running process or query in 10g

We have application which is hosted on 10g AS. Some forms has lot of processing to be done and sometimes user wants to cancel the processing in between maybe because he wants to change some value and refire processing.
Based on the search on net 'Esc' key was used in earlier version of forms to function as User requested Cancel operation. How can same be done in 10g. Do we have to do anything in fmrweb.res for this. Is there some setting to be done in forms or in AS for this functionality.
Does this matter on whether JInitiator is used or JPI is used for running the application?
Edited by: suresh_mathew on May 21, 2013 1:36 AM

Hi,
Exit can be used to cancel query mode i.e. in case you go into query mode by Exit you can cancel query mode. Suppose you went into query mode and you have fired query which will take some time to fetch how can I abort it.
In earlier version of form there was 'Cancel' facility wherein if triggered it used to fire an error message 'Ora--01013 user requested cancel of current operation"
With this facility you can abort any query which is executing or any long running process which forms is currently performing.
fmrweb.res would have entry like
27 : 0 : "Esc" : 1001 : "Cancel"
The above entry I picked from OPN
Java Function Numbers And Key Mappings For Forms Deployed Over Web [ID 66534.1]
Unfortunately this is not working for us even if I put this in frmweb.res of 10g AS
Basically I want ability to Abort/Cancel a long running process be it query execution or standard process triggered in the form.
Any advise or help is highly appreciated.
Suresh

Error in Process chain for CO-PC

Dear ALL
I am facing one problem.I have a process chain for CO-PC cost object controlling.In that after start process i have another process chain Manufacturing order.After this other processes are there.Upto 4th march i have the delta running fine.After that the manufacturing order PC is failing when i open the process chain i find its failing in DTP section.
Now what i did is i run the DTP for manufacturing order actually it consist of ATTRIBUTES AND TEXTS.After finishing i find in manage that the records are transferred but 0 records added and when i find the log its saying
@5C@ 0PRODORDER : Data record 1 ('000001000000 ') : Duplicate data record RSDMD 191
Thanks in Advance

Hi,
Check below these links for more business knowledge about CO-PC.
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/COPCIS/COPCIS.pdf
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/fb07ab90-0201-0010-c489-d527d39cc0c6.
Regards,
Praveena.

Error in Process Chain for Delta pack

Hi All,
Here I am facing error in process chain for delta pack.
Error:
Last delta upload not yet completed. Cancel I
Please send me the solution asap.
Thanks

Hi,
This message means there may be a load triggered by the same infopackage that may be still running or may be still having yellow status. Go to the monitor screen from this IP itself and it will show the paricular request (it will be the latest one). See if that load is active and running. If its active try to find out if load is happening, if its happening you may let it progress. If its not active you need to force the status to red and delete from the target. Once this is done you can retrigger the load. If its a datamart load you may need to reset the data mart status before the triggering the load.
Refer
Last delta update is not yet completed
Last delta update not yet completed-PC Chain Error
Last Delta Not Yet Completed
This is the same issue as yours.
Thanks,
JituK

How to create process chain for 0EMPLOYEE

I want to create process chain for 0EMPLOYEE attribution and text, how to create it and make a schedule for daily loading? Could anyone write steps in my case? Thanks!

Hi,
Follow the following steps:
1. Go to RSPC->create->give name and disc of your chain.
Start Variant Creation
2. Now you will be prompted to give a start variant,create a new variant(click on page icon )
3.Change Selections->date/ time.
4.give date and time for start of the chain.
5.click the check box for periodic job->period values->daily->save->save
Addition of process types
6.Select the process type "Execute Infopackage"
7.select the name of the infopackage which loads attr data to 0EMPLOYEE.
8.Attribute Change run will come automatically( if not then drag it as well and create variant )
9.select the name of the infopackage which loads text data to 0EMPLOYEE.
10.Attribute change run wil again follow.
(connect the process types which are not connected,by right clicking the process types )
                             start
                       IP A     IP T
                      attr          attr
A = attribute
T = Text
Please Reward points if useful
Manish

Long running Process chain for less Number of records

Similar Messages

Maybe you are looking for