Long runtime with M_VMVLI using external ids

We are currently experiencing ORA 1555's when shipment_create jobs are run and are sequentially reading M_VMVLI table which is over 3.3 M rows. Due to this long read time, and our database in a high update mode 24 X 7, the read's fail with the 1555. Anyone have experience with this? We are 46C, DI 46C1, patch level 38.

With real problems like this it's better to us the OSS for support questions.

Similar Messages

I can no longer connect with others using FaceTime after the mandatory update

I updated my iPad software and now when I try to connect with someone using FaceTime I can never fully connect.
Can anyone help me or seen this issue?

Unable to make or receive FaceTime calls after April 16, 2014
http://support.apple.com/kb/TS5419
Using FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
http://tinyurl.com/a7odey8
Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/TS4268
iOS: FaceTime is 'Unable to verify email because it is in use'
http://support.apple.com/kb/TS3510
Using FaceTime and iMessage behind a firewall
http://support.apple.com/kb/HT4245
iOS: About Messages
http://support.apple.com/kb/HT3529
Set up iMessage
http://www.apple.com/ca/ios/messages/
iOS and OS X: Link your phone number and Apple ID for use with FaceTime and iMessage
http://support.apple.com/kb/HT5538
How to Set Up & Use iMessage on iPhone, iPad, & iPod touch with iOS
http://osxdaily.com/2011/10/18/set-up-imessage-on-iphone-ipad-ipod-touch-with-io s-5/
Set Up Alert Sounds
http://www.quepublishing.com/articles/article.aspx?p=1873027&seqNum=3
Extra FaceTime IDs
http://tinyurl.com/k683gr4
Troubleshooting Messages
http://support.apple.com/kb/TS2755
Troubleshooting iMessage Issues: Some Useful Tips You Should Try
http://www.igeeksblog.com/troubleshooting-imessage-issues/
Setting Up Multiple iOS Devices for iMessage and Facetime
http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
FaceTime and iMessage not accepting Apple ID password
http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
Fix Can’t Sign Into FaceTime or iMessage iOS 7
http://ipadtutr.com/fix-login-facetime-imessage-ios-7/
FaceTime, Game Center, Messages: Troubleshooting sign in issues
http://support.apple.com/kb/TS3970
Unable to use FaceTime and iMessage with my apple ID
https://discussions.apple.com/thread/4649373?tstart=90
iOS 7 allows you to block phone numbers or e-mail addresses from contacting you via the Phone, FaceTime, or Messages
http://howto.cnet.com/8301-11310_39-57602643-285/you-can-block-people-from-conta cting-you-on-ios-7/
How to Block Someone on FaceTime
http://www.ehow.com/how_10033185_block-someone-facetime.html
My Facetime Doesn't Ring
https://discussions.apple.com/message/19087457#19087457
How to watch FaceTime calls on the big screen with Apple TV
http://www.imore.com/daily-tip-ios-5-airplay-mirroring-facetime
Send an iMessage as a Text Message Instead with a Quick Tap & Hold
http://osxdaily.com/2012/11/18/send-imessage-as-text-message/
To send messages to non-Apple devices, check out the TextFree app https://itunes.apple.com/us/app/text-free-textfree-sms-real/id399355755?mt=8
How to Send SMS from iPad
http://www.iskysoft.com/apple-ipad/send-sms-from-ipad.html
How to Receive SMS Messages on an iPad
http://yourbusiness.azcentral.com/receive-sms-messages-ipad-16776.html
Apps for Texting http://appadvice.com/appguides/show/apps-for-texting
You can check the status of the FaceTime/iMessage servers at this link.
http://www.apple.com/support/systemstatus/
 Cheers, Tom

Need help on displaying the callers name on ip phone with cme using external directory

Hello Guys,
Need help on displaying the callers name on ip phone with cme while using external directory
Thank you,
Khaja

Thanks for your help,
Does it 100% work with CME. We use SIP and 2ring for external directory? Thanks you.

Using Time Machine with a Used External Hard drive

I had posted a question before about using an external hard drive that I have for a Time Machine back up that already have some stuff on the hard drive, and if using it for Time Machine would erase the info I currently have on the drive.
I got a response that said if it was formatted as Xsan or Mac OS Extended with or without case-sensitivity or journaling, it would not erase my current info, but otherwise, it would.
When I checked the format on my external hard drive, it is listed as "MS-DOS (FAT32)". Does that mean it is the Xsan/Mac OS extended (that wouldn't erase my current information) or does it mean it WILL erase my info?
Thank you!!

Does that mean it is the Xsan/Mac OS extended (that wouldn't erase my current information)
No
does it mean it WILL erase my info?
Yes. FAT formatted drives are for use with Windows.

How to poll data with DBAdapter using external sequencing table usecase ?

Hi,
When I'm polling for data using the 'update external sequencing table on different db' with a dbadapter, I'm getting this error ORABPEL-09903
My sequencing table is present in another schema. I created the connection pool and data source for the same and provided it as a credential to the adapter when it asked for data source. But my process is not getting deployed. The complete error it's giving is as below :
[deployProcess] Deploying process E:\Softys\jdev\jdev\mywork\Test\PollExternal\output\bpel_PollExternal_1.0.jar
BUILD FAILED
E:\Softys\jdev\jdev\mywork\Test\PollExternal\build.xml:79: A problem occured while connecting to server "ple-jgau.us.oracle.com" using port "7777": bpel_PollExternal_1.0.jar failed to deploy. Exception message is: ORABPEL-09903
Could not initialize activation agent.
An error occured while initializing an activation agent for process "PollExternal", revision "1.0".
Please ensure that the activation agents are configured correctly in the bpel deployment descriptor (bpel.xml).
oracle.tip.adapter.fw.agent.jca.JCAActivationAgent: java.lang.reflect.InvocationTargetException
at com.collaxa.cube.engine.core.BaseCubeProcess.startAllActivationAgents(BaseCubeProcess.java:370)
at com.collaxa.cube.engine.deployment.DeploymentManager.activateDefaultRevision(DeploymentManager.java:1577)
at com.collaxa.cube.engine.deployment.DeploymentManager.setDefaultRevision(DeploymentManager.java:1536)
at com.collaxa.cube.engine.deployment.DeploymentManager.deployProcess(DeploymentManager.java:886)
at com.collaxa.cube.engine.deployment.DeploymentManager.deploySuitcase(DeploymentManager.java:728)
at com.collaxa.cube.ejb.impl.BPELDomainManagerBean.deploySuitcase(BPELDomainManagerBean.java:445)
at sun.reflect.GeneratedMethodAccessor152.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at com.evermind.server.ejb.interceptor.joinpoint.EJBJoinPointImpl.invoke(EJBJoinPointImpl.java:35)
at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
at com.evermind.server.ejb.interceptor.system.DMSInterceptor.invoke(DMSInterceptor.java:52)
at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
at com.evermind.server.ejb.interceptor.system.JAASInterceptor$1.run(JAASInterceptor.java:31)
at com.evermind.server.ThreadState.runAs(ThreadState.java:646)
at com.evermind.server.ejb.interceptor.system.JAASInterceptor.invoke(JAASInterceptor.java:34)
at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
at com.evermind.server.ejb.interceptor.system.TxRequiredInterceptor.invoke(TxRequiredInterceptor.java:50)
at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
at com.evermind.server.ejb.interceptor.system.DMSInterceptor.invoke(DMSInterceptor.java:52)
at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
at com.evermind.server.ejb.InvocationContextPool.invoke(InvocationContextPool.java:55)
at com.evermind.server.ejb.StatelessSessionEJBObject.OC4J_invokeMethod(StatelessSessionEJBObject.java:87)
at DomainManagerBean_RemoteProxy_4bin6i8.deploySuitcase(Unknown Source)
at com.oracle.bpel.client.BPELDomainHandle.deploySuitcase(BPELDomainHandle.java:319)
at com.oracle.bpel.client.BPELDomainHandle.deployProcess(BPELDomainHandle.java:341)
at deployHttpClientProcess.jspService(_deployHttpClientProcess.java:376)
at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:59)
at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:462)
at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:594)
at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:518)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:65)
at oracle.security.jazn.oc4j.JAZNFilter$1.run(JAZNFilter.java:396)
at java.security.AccessController.doPrivileged(Native Method)
at javax.security.auth.Subject.doAsPrivileged(Subject.java:517)
at oracle.security.jazn.oc4j.JAZNFilter.doFilter(JAZNFilter.java:410)
at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:623)
at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:370)
at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:871)
at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:453)
at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:302)
at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:190)
at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
at java.lang.Thread.run(Thread.java:595)
Total time: 20 seconds
Any help regarding this would be highly appreciated.Please provide me with any link to the documentation for DBAdapters,Polling and its different Usecases.
Thanks,
Bhavya

Hi there,
this exception just mentions that the process failed to deploy, but it does not explain why. Could you look at the bpel logs, and find the complete exception stack trace with linked exceptions?
This is a common trouble shooting problem as the process deployer doesn't show the linked exception. Please look at the best practices guide:
http://download.oracle.com/technology/tech/soa/soa_best_practices_1013x_drop3.pdf
Under DBAdapter there is a section on how to troubleshoot the adapter. Search for "Find the Root Exception". It is on Page 130.
Thanks
Steve

Computer crash with iTunes - Using external firewire 800 drive

I am using an external firewire 800 drive (2TB Lacie) to store all my music for iTunes... At random times this crashes the computer, the music "skips" and the computer has a grey notice telling me to shutdown immediately. I am not sure why this is happening, but think this must be some sort of conflict issue... but no clue how to resolve... Any advice would be great!! Thanks!

Oh no, sounds like kernel panics. Time to head directly to The X Lab to read the FAQs and get started with maintenance and troubleshooting. Unfortunately, this problem goes way beyond iTunes, so for additional support, you should post in the appropriate OS X forum.

My final cut is running extremely slow after having for 6 months. I use external hard drives and save nothing on my computer. it takes a long time to render now. do you think something is wrong with computer. took it to mac store but they fail to help

my final cut is running extremely slow after having for 6 months. I use external hard drives and save nothing on my computer. it takes a long time to render now. do you think something is wrong with computer. took it to mac store but they fail to help me. I have a 13 inch mac book pro 10.6.8 8gb 2.3 gfz intel core i5

What did Apple tell you about what they did (or did not) find here?
See if working on the main disk is any faster.
USB2 is glacial, as I/O interconnects go. And USB2 disks have been known to fail, or sometimes to drop back to USB1 speeds, too. FireWire 800 is substantially faster than USB2, but still not as fast as the internal drive connections can provide.
Put another way, start varying your configuration, and see which configuration changes (still) have the problem, and which don't.

HT5988 I downloaded Mavericks and now my WD Smartware that I use for Time Machine is no longer compatible with this OSX version? How do I make that unit compatible? olefromca

I downloaded Mavericks and now my WD Smartware that I use for Time Machine is no longer compatible with this OSX version? How do I make that unit compatible? olefromca

I agree entirely, been messing with this since the upgrade to Mavericks but I didn't find it quite as easy as uninstalling the WD smartware as it still operates when you plug the drive back in - I think it gets loaded onto the drive and runs from within (?). The advice from WD was that time machine was faulty and I should contact Apple...thanks guys!
Anyway, for the OP's benefit, this is what I found:
1. My problem was that time machine couldn't see any further back than before the Mavericks install, but if I opened up and interrogated the WD drive, the old backups were still there.
2. When TM started doing new backups, it overwrote the ones that it could see, not the oldest ones on the drive. This indicated to
me that the WD software had somehow partitioned off the old backups and excluded that part of the drive from being overwritten. Of course, as the drive was practically full, it meant that any new backups wouldn't fit in the available space.....
3. The only way I could find to resolve this was to use the disc utility to erase and repartition the external drive. This will obviously remove all of the old files and backups, but I was more concerned about keeping a current profile as backup rather than a load of stuff from months ago.
4. Anyway, what happens after the eraseure has completed is that you get the WD icon on the desktop, and you're invited to install the software - this means the software has now been deleted. Juts don't reinstall it, just let TM do it's backup and all is well.
Usual disclaimers and warnings about keeping another copy of your system etc. obviously apply, and I know this is a radical move to delete all your old data but it worked for me. I guess I didn't appreciate that you could use the external drive without the software that came with it and just followed the screen guide.
I'm also aware that if you don't want to use TM to do a complete restore and only want to find one old version of a document, this is difficult. However, you can then install the WD software and find the file but you'll then have to do this all again.....

Time Machine no longer working with External Hard drive

Hello
I have an iMac 24 and an Iomega 500Gb drive. TimeMachine was working fine when I first set it up over Firewire. I then bought a MacBook and tried to use a the same drive to run separate Time Machine backups. I aborted it when I ran out of time as I was going away.
The iMac and the MacBook no longer recognise the Iomega drive as valid. I get an error about the drive being read only.
How can I resolve or reset this to get the iMac backups working? I'll probably buy a portable drive for the MacBook backups.
Thanks

mosey,
Unfortunately, your going to have to reformat the drive. There is no fix for the "Read Only" issue at this time.
*_How Should a Time Machine Hard Disk be Prepared?_*
For Time Machine to work properly, the hard disk must be formatted “Mac OS Extended (Journaled)” and its’ Partition Scheme should be either GUID or Apple Partition Map.
Time Machine is incompatible with disks partitioned as Master Boot Record (MBR). Unfortunately, this describes nearly every hard drive you can buy because MBR is a Windows partition scheme. (Naturally, this DOES NOT apply to Apples’ Time Capsule.)
For some, Time Machine begins to perform as expected with a new external hard disk. But then the initial full backup or subsequent incremental backups fail. The user only later discovers the hard disk was still partitioned as Master Boot Record (MBR).
One article on Time Machine made this observation: “Virtually everybody will have to open Disk Utility and repartition the disk as APM or GUID. It doesn't really matter which one because the Time Machine disk will not be bootable anyway. APM allows a disk to boot a PowerPC, GUID allows the disk to boot an Intel processor but both are easily digestible by Time Machine on either kind of processor.” [http://www.girr.org/mac_stuff/backups.html]
It’s been recommended by many here that your reserve at least double the size of your primary hard disk, that way Time Machine backups have room to grow as the size of your data grows. Additionally, the more space you give Time Machine the more history it can preserve. The less space you reserve for Time Machine the sooner older backups & deleted items will disappear.
Procedure
Connect the hard disk you wish to use for Time Machine backups.
Launch Disk Utility.
It will appear twice in the pane on the left. (Make sure you recognize that it is different from the 2 icons that represent your Macs' internal drive.) The upper entry represent the device as a whole, including the controller inside. The lower entry represents the hard disk contained within the device.
Click on the upper icon of the external hard disk.
Select the "Partition" tab.
For "Volume Scheme" choose "1 partition". (Chose 2 partitions if you intend on storing other data on the disk besides your Time Machine backups.)
Name the disk.
Format should be "Mac OS Extended (Journaled)".
Click "Options".
Select either GUID or Apple Partition Map. (See above for significance)
Click "OK".
Click "Apply".
Now chose the level of secure erase you desire. (More passes means more time)
Once the external hard disk is repartitioned, select it again in Time Machine preferences and use it for your backups.
Let us know if this was helpful.
Cheers!

La Cie Porsche Design External Hard Drive no longer working with Time Machine since update to Yosemite.

My La Cie Porsche Design External Hard Drive USB 3.0 is no longer working with Time Machine. Is Yosemite the cause? How do I fix?

Can you see the drive in Disk Utility? If so, try selecting it and using the Mount button in the top menu. You can also run repair disk and repair permissions.

I have a 17" Macbook pro with flickering red and cyan(blue) lines across the screen. The issue disappears temporarily when I tap on the computer, and the problem does not occur when I use external display or try to screen capture the problem.

I purchased my Macbook (17") through a certified apple tecnition in August 2012, it was refurbished and the motherboard was completely replaced. I do a lot of photo editing, but I have been unable to do so because of the red vibrating lines that interrupt my screen. The issue disappears temporarily when I tap on the computer, and the problem does not occur when I use external display or try to screen capture the problem. I brought the computer back to the technition I purchased it from and he said that it was a problem with my fan, so I have two new fans but the issue is still occuring. He says he doesnt know whats wrong. Does anyone have any information on this issue?
Here is an image of the issue
http://www.flickr.com/photos/67839707@N08/8884847081/

I recommend having your Mac serviced by someone competent. A force sufficient to "blow apart" the fans was clearly excessive and may have damaged the display cable, as well as any number of other problems.
Dust is properly cleaned with a vacuum, preferably one designed for computer service, and they are not cheap.
Compressed air should never be used. It just blows dust everywhere, often into places where it can no longer be removed.

I used to have an application in my iPhone 4 and 4s that captures business card and creates its content to my contacts. Its no longer working with my i5. Can you recommend me a new apps for this same function

I used to have an application in my iPhone 4 and 4s that captures business card and creates its content to my contacts. Its no longer working with my i5. Can you recommend me a new apps for this same function

Try CardMunch it works well for me

How do I use my late 2011 iMac ( with thunderbolt) as external monitor for laptop/Xbox or other device with hdmi as output.

May be this question has been asked thousand times. how do I use my mid 2011 iMac ( with thunderbolt) as external monitor for laptop/Xbox or other device with hdmi as output. if apple hasn't removed that feature and has just moved that functinoality to thunderbolt then how can I use it. currently there is no laptop available with thunderbolt output. no 3rd party converter available. whats the use of having feature on latest functionality if we cant use it. I wish they would have made one port has mini-dvi and other thunderbolt for backward compatibility untill some vendor comes up with converter.

It Says :
Mac (21.5-inch, Mid 2011) and iMac (27-inch, Mid 2011) and later computers support Target Display Mode via Thunderbolt to Thunderbolt cable (2 m) when the source is another Thunderbolt-equipped computer.
Name one computer model/vendor which has thunderbolt as output for display + audio. this is so stupid to move to new technology without availbility of its compatible devices.

I have a ibook G4 which has become redundant as my phone will no longer work with the version of itunes installed (latest it can use), how can I back up my phone to transfer to a new computer (a PC now)?

My iphone 4s (7.1.1) will no longer work with my ibook G4 which is running 10.5.8. I have a PC which i'm now going to have to use, I've manually transferred my music and photos, but how do I go about transferring my contacts and calenders. What does itunes on PC sync to in terms of contacts and calenders?
Thanks!

Hi there BDempster,
You may find the information in the articles below helpful.
iOS: How to transfer or sync content to your computer
http://support.apple.com/kb/HT1296
iTunes 11 for Windows: Sync contacts, calendars, and other info with iPod, iPhone, or iPad
http://support.apple.com/kb/PH12317
You can use iTunes to sync the contacts, calendars, notes, Safari bookmarks, and email account information on your computer with your iPod, iPhone, or iPad. iTunes also syncs this information from your device to your computer—for example, if you add contacts on your iPad, syncing adds those contacts to Windows address book or Outlook Express on your computer.
-Griff W.

Can i connect a external hard drive to apple tv 3 generation, for see my movies itunes with out use streaming or icloud?

can i connect a external hard drive to apple tv 3 generation, for see my movies itunes with out use streaming or icloud? in apple tv 3 and 2?
That i want to know is i can connect a external hard drive to apple tv, for see my movies that i keep in my external hard drive, i dont want to see then whit the streaming and icloud, or used my laptop o pc for access de movies and stuff.
i put iny spanish to, because i feel my english is not so good, but i hope you understand me.
if i can´t connect a external hard drive, wich others media players divices you know that can see itunes movies?
¿quisiera saber si se puede conectar una memoria externa al apple tv, para ver el contenido de itunes que tengo guardado en esa memoria como peliculas, ect?
lo que no quiero es usar la icloud, o el servicio streamig para ver mi contenido, ni tener que usar la computadora para ver mi contenido el la tv?
y de no poderse conectar que otros dispositivos media pleyer conoces para ver peliculas de itunes en la tv?

Welcome to the Apple Community.
can i connect a external hard drive to apple tv 3 generation
Unfortunately not.

Long runtime with M_VMVLI using external ids

Similar Messages

Maybe you are looking for