Long select command

hey, I have a real long select command and it goes down to the next row of my sql*plus. when i try to perform it it says the from statement is in the wrong spot but its just getting confused. how do i fix this?

Just manually edit the query and add adequate line feeds. That would make the query readable too.

Similar Messages

I just noticed that I can no longer select photos out of my finder that are located in my Aperture/Iphoto Library. I used to be able to attach photos to my gmail out of the aperture library in the finder and for some reason, no longer can.

I just noticed that I can no longer select photos out of my finder that are located in my Aperture/Iphoto Library. I used to be able to attach photos to my gmail out of the aperture library in the finder and for some reason, no longer can.
I can't access these images except to go into the applications.
Also, I'd like to import my iphoto library into aperture, and move aperture library to an external drive. I tried the import first, but there wasn't enough space. Then I tried copying over the aperture library onto the external drive but it failed bc it said file was in use.
As it is, I only have 50gb left on my imac, and the aperture library is 150gb. Also, I have over 10k images in both libraries combined and there are tons of duplicates that need to be sorted, and hopefully not messed up because I've organized most of them.
So in short, I need to know how to do the following:
-select photos in finder in aperture/iphoto libraries
-move aperture library to live on external drive
-import iphoto library into aperture library
-eliminate dups but maintain organization
-moving forward i need a better workflow so that I import images from camera, and can organize right away into albums rather than creating projects by default and then creating albums so essentially the photos are in 2 different places, even tho they are referenced
-live happily ever after
Thanks in advance for any support you can offer!!

If you're using apps like iPhoto or Aperture then they replace the Finder for managing your photos. The point is that you use the (many) options available via these apps for the things you want and need to do with the Photos.
So, simply, you don't select the photos in the Finder. I'll append the supported ways to do this - which are faster and will yield the current version of your Photos - to the end of this post.
-move aperture library to live on external drive
Managed or Referenced Library? Managed -
Make sure the drive is formatted Mac OS Extended (Journaled)
1. Quit Aperture
2. Copy the Library from your Pictures Folder to the External Disk.
3. Hold down the option (or alt) key while launching Aperture. From the resulting menu select 'Choose Library' and navigate to the new location. From that point on this will be the default location of your library.
4. Test the library and when you're sure all is well, trash the one on your internal HD to free up space.
Referenced - relocate your Masters first.
These issues are covered in the Manual and on this forum hundreds of times.
-import iphoto library into aperture library
FIle -> Import -> iPhoto Library? Have you done this already? If so are you trying to move the Masters to Aperture from an iPhoto Library? Or Consolidate them?
-moving forward i need a better workflow so that I import images from camera, and can organize right away into albums rather than creating projects by default and then creating albums so essentially the photos are in 2 different places, even tho they are referenced
You can't. Every photo is in a Project. They’re the basic building blocks of the Library.
You might want to spend a little time with the manual or the video tutorials. I'm not sure you've grasped the app you've purchased.
The following is written for iPhoto, but about 97% works for Aperture too.
There are many, many ways to access your files in iPhoto/ APerture: You can use any Open / Attach / Browse dialogue. On the left there's a Media heading, your pics can be accessed there. Command-Click for selecting multiple pics. This is what you use to attach your shot to your GMail
(Note the above illustration is not a Finder Window. It's the dialogue you get when you go File -> Open)
You can access the Library from the New Message Window in Mail:
There's a similar option in Outlook and many, many other apps. If you use Apple's Mail, Entourage, AOL or Eudora you can email from within iPhoto/ Aperture.
If you use a Cocoa-based Browser such as Safari, you can drag the pics from the iPhoto Window to the Attach window in the browser.
If you want to access the files with iPhoto/ Aperture not running:
For users of 10.6 and later: You can download a free Services component from MacOSXAutomation which will give you access to the Library from your Services Menu.
Using the Services Preference Pane you can even create a keyboard shortcut for it.
or use this free utility Karelia iMedia Browser

I am having mac book air 2012model i had installed mavericks and use it, i long press command and power button at a same time and i saw the command prompt, from that i had formated the total hard disk. how to i want to install the OS again ?

I am having mac book air 2012model i had installed mavericks and use it, i long press command and power button at a same time and i saw the command prompt, from that i had formated the total hard disk. how to i want to install the OS again ?
i tryed with download mavericks but finally its saying a error message like cant conect to istore like that its saying and every thing is clear like internet and other stuf i tryed with 3times no progress same error pls help.. i bought this lap for my bro with his apple id only we use it now he got a new mac book pro so he gave to me so i formated and use it i use my apple id is that problem come because of changing apple id ? pls eplain

Firstly, what is the source of the 10.6.4 disc? Is it the original installation disc for your MacBook, or one 'borrowed' from another computer?
It isn't the retail version, because that's 10.6.3.
Assuming it's the correct disc (i.e. the one that shipped with your Mac), you need to boot from it again.
OK the language page.
From the installer screen, ignore the continue button, go to the menu bar and choose Disk Utility from the Utilities menu.
In DU, select your internal drive in the sidebar (the top item with the makers name and serial no.).
Run Repair Disk. If that comes up as disk OK, click the partition tab. Select the partiton from the drop-down above the graphic; 1 partiton is all you need.
Go to the options button and ensure that the partition scheme is GUID and the file system to Mac OS Extended (Journalled). Name the partiton (usually Macintosh HD), click Apply.
When the Macintosh HD volume appears below the drive name, quit DU and see if you can then install.
If the screen after the language screen doesn't show the menu bar, it may be necessary to use another Mac to do the job with the MB in Firewire Target Disc Mode. If it won't boot in TDM, or the MB doesn't have FireWire then it's getting very difficult.

Midi Trim (Delete all except selected) Command?

Does this exist?
Midi Trim (Delete all except selected) Command?
For instance: I have a simple triad chord progression and I only want the 3rd note of the triad (the middle note) of each chord. So I select the 3rd of the triad of each chord and now I want to "Delete all except selected".
Been doing it the old fashion way for way too long. I'm working in Logic X and 9. Thank you.

The best way I find to do this is to select the note/s, right click, select invert selection then delete.
( Key command for this is: shift + I )

Can no longer select text in email template or read only field with mouse using IE or Firefox?

Hi Guys,
I can no longer select text in email template or read only field using my mouse in IE or Firefox anymore. We are using CRM 2011 rollup 18 applied with IE 11 and the latest version of Firefox. We only applied roll up 18 in Feb when this issue began.
Thanks
Dave
David Kelly

When you have a problem with one particular site, a good "first thing to try" is clearing your Firefox cache and deleting your saved cookies for the site.
(1) Bypass Firefox's Cache
Use Ctrl+Shift+r to reload the page fresh from the server.
(You also can clear Firefox's cache completely using:
orange Firefox button ''or'' Tools menu > Options > Advanced
On the Network mini-tab > Cached Web Content : "Clear Now")
(2) Remove the site's cookies (save any pending work first) using either of these. While viewing a page on the site:
* right-click and choose View Page Info > Security > "View Cookies"
* Alt+t (open the classic Tools menu) > Page Info > Security > "View Cookies"
Then try reloading the page. Does that help?
These features rely on JavaScript, and it sounds as though you have scripting enabled if you get (the wrong) color changes. Some add-ons might alter the way scripts operate, so a standard diagnostic to bypass interference by extensions (and some custom settings) is to try Firefox's Safe Mode.
First, I recommend backing up your Firefox settings in case something goes wrong. See [[Backing up your information]]. (You can copy your entire Firefox profile folder somewhere outside of the Mozilla folder.)
Next, restart Firefox in Firefox's Safe Mode ([[Safe Mode]]) using
Help > Restart with Add-ons Disabled
In the dialog, click "Start in Safe Mode."
If those features work correctly, this points to one of your extensions or custom settings as the problem.
To also disable plugins, you can use this page:
orange Firefox button ''or'' classic Tools menu > Add-ons > Plugins category
Any change?

My Itunes is no longer allowing me to manage my music on my phone i can no longer select on my iphone to make playlists and delete music. Please help fix my problem.

My Itunes is no longer allowing me to manage my music on my phone i can no longer select on my iphone to make playlists and delete music. Please help fix my problem. Iphone4s, 32gigs, IOS 7.1.2
I don't know why it stopped working but it happened a month or two ago but the option on this phone that's usually all the way to the left when you select your device but now its not and I don't know what caused it. ive already tried troubleshooting my problem but have found no help.

Hello Salmomma,
Thank you for the details of the issue you are experiencing when trying to connect your iPhone to your Mac. I recommend following the steps in the tutorial below for an issue like this:
iPhone not appearing in iTunes
http://www.apple.com/support/iphone/assistant/itunes/
Additionally, you can delete music directly from the iPhone by swiping the song:
Delete a song from iPhone: In Songs, swipe the song, then tap Delete.
iPhone User Guide
http://manuals.info.apple.com/MANUALS/1000/MA1658/en_US/iphone_ios6_user_guide.p df
Thank you for using Apple Support Communities.
Best,
Sheila M.

Why does double-click no longer select a whole word?

I am on the beta update channel and currently using FF 8.0, latest update as of the moment of this posting.
I am not sure when it happened - I think since I started using 8.0 - but double-click no longer selects a whole word. It's the same effect as a single click - simply positions the insertion point where the mouse cursor is located.
This is very aggravating. I thought it may be a bug in the new version (I already posted it to Bugzilla, but hasn't been confirmed yet), Unfortunately, I don't have the old version to cross-check (can I install both versions on one machine?)
Or is it some configuration issue? Or conflict with something else? I've searched and not (yet) found any other complaints about this issue from other users.
Note that I do not have the problem in any other app nor in other browsers that I have installed (e.g., IE, Chrome, Opera, Safari). In all of those, double-click on a word selects the whole word.
Thanks in advance for any suggestions or guidance.
Best,
Yosh

OK - I found the culprit. It seems that the Answers.com '''1-Click Answers''' utility had changed its behavior. In its Options on the Activation tab is an option to activate it when using double-click in a browser. I don't remember turning it on, but it ''was'' on. When I turned that option off, the problem went away. Apparently it is not compatible with FF8, since double-click was apparently intercepted, but 1-Click Answers was not activated - the double-click simply became a no-op.
Now that I've turned off that option, double-click in FF8 is back to the way it's supposed to work for quickly selecting a whole word or sentence.
If anyone else encounters this problem, I hope this information will help to resolve it.

Can no longer toggle to enlarge Twitter embed box; can no longer select category on Movable Type; works for other browsers.

I can no longer enlarge the Twitter embed box or even select and scroll in order to copy and paste all the code. Also, in Movable Type I can no longer select the category for our entries. So "boxes" aren't working. They do work in Safari, so it looks like a browser issue. I'm on Firefox 16.0.1 and Mac OS X 10.7.5. Problem just started on October 12.

You may have a problem with the "can't delete" or it may have been an isolated out of synch condition.
I have noticed that the "express" watch/delete process only works when you watch from oldest to newest.
also,there is that ridiculous extra step where it alerts you that there are no more episodes left. How about replacing that with an episode counter that tells how many are left when given the choice to watch more.
After the last one, just move on like it works for everything else. Whoever had the idea to add the "no more" message must have done it intending to iritate cusrtomers. That is the only possible reason for it.

I recently updated to the newest version of Flash (17.0.0.134) and I have a MacBook Air, running OSX. Ever since the update I can no longer select drop down menus or get Netflix to run properly. Has anyone else had this issue/know how to resolve it?

I recently updated to the newest version of Flash (17.0.0.134) and I have a MacBook Air, running OS X and I have Safari version 8.0.4. Ever since the update I can no longer select drop down menus or get Netflix to run properly. Has anyone else had this issue/know how to resolve it?

1. System Preferences > Flash Player > Advanced > Delete All
    Press “Delete All” button under “Browsing Data and Settings”.
2. Install Adobe Flash Player.
    System Preferences > Flash Player > Updates
    Press the “Check Now” button.
    http://get.adobe.com/flashplayer/
    Download it and quit Safari from Safari menu in the menu bar.
    Follow the prompts to install Adobe Flash Player.

Can no longer select text in Preview

Hello there,
A very annoying problem: I selected some text in a .pdf file that was opened with Preview and I marked it yellow, however once I saved it I could no longer select any more text, it is like the function has disapeared. I even tried restarting the computer, but I can no longer select text in that file. How odd?
Funny enough, the phenomenon doesn't occur with all my .pfd files. I guess it is a bug, but quite annoying. Any one else having the same problem?

Thanks for posting back though i'm sorry it didnt work.
I believe there are also other dashboard plist files in that folder (i'm not currently at my Mac so can't say which exactly, though i believe one is called "client"). You could try trashing them (or dragging them to the desktop).
Does the problem also happen if you log in to another account? Create a new account if necessary.
/p

HT3529 I am currently deployed and was using my iMessage to be able to talk to family back in the states and my iMessage stopped working. It will no longer select my number to use as the send/receive. How do I fix this so I can continue to talk to family?

I am currently deployed and was using my iMessage to be able to talk to family back in the states and my iMessage stopped working. It will no longer select my number to use as the send/receive. How do I fix this so I can continue to talk to family?

Read here:
http://support.apple.com/kb/TS2755

SELECT command denied

Hi guys,
We have an issue about toplink. We have two enviroments, a developer enviroment glassfish 2.1, windows xp and java 1.6. Our application have toplink essentials, JPA and some entities mapped. In developer enviroment it all works done but in test enviroment we cant execute any query! And we cant understand why, we talk with our DBA and he got all grants to user but we have allways same problem:
[#|2009-12-30T12:31:03.562-0300|WARNING|sun-appserver2.1|oracle.toplink.essentials.session.file:/opt/glassfish/domains/domain1/applications/j2ee-apps/kmonitor-EAR/KMonitor-ejb_jar/-KMonitor|_ThreadID=225;_ThreadName=p: thread-pool-1; w: 196;_RequestID=fda25a98-2c3a-43d0-ae4e-4a1c1cd3167f;|
Local Exception Stack:
Exception [TOPLINK-4002] (Oracle TopLink Essentials - 2.1 (Build b31g-fcs (10/19/2009))): oracle.toplink.essentials.exceptions.DatabaseException
Internal Exception: com.mysql.jdbc.exceptions.jdbc4.MySQLSyntaxErrorException: SELECT command denied to user 'km_dsv'@'cassini' for table 'fontestatus'
Error Code: 1142
Call: SELECT id_fontestatus, criacao, usuario_criacao, nome, alteracao, codigo, usuario_alteracao, descricao FROM kmonitor.fontestatus WHERE (id_fontestatus = ?)
bind => [1]
Query: ReadObjectQuery(com.knowtec.suiteic.kmonitor.informacao.entity.Fontestatus)
Its the first query and its executed from JPA... we use mysql database.
Here persistence.xml:
<?xml version="1.0" encoding="UTF-8"?>
<persistence version="1.0" xmlns="http://java.sun.com/xml/ns/persistence" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://java.sun.com/xml/ns/persistence http://java.sun.com/xml/ns/persistence/persistence_1_0.xsd">
<persistence-unit name="KMonitor" transaction-type="JTA">
<jta-data-source>jdbc/kmonitor</jta-data-source>
<exclude-unlisted-classes>false</exclude-unlisted-classes>
<properties/>
</persistence-unit>
<persistence-unit name="KMonitor-standalone" transaction-type="RESOURCE_LOCAL">
<non-jta-data-source>jdbc/kmonitor</non-jta-data-source>
<exclude-unlisted-classes>false</exclude-unlisted-classes>
<properties>
</properties>
</persistence-unit>
</persistence>
We use KMonitor in glassfish, stand-alone unit is not used and ignore it.
Thanks!

Hi I discovered problem. Top link doesnt have correct message for this problem!
My entity had this annotation:
@Entity
@Table(name = "fontestatus", catalog = "databasename", schema = "")
But catalog doesn´t exist in test enviroment, only development! solution is delete this:
@Entity
@Table(name = "fontestatus")

Using a VARCHAR2 in a SELECT command

I'm trying to query for a given path in a hierarchy of products. However, I want to be able to have it return multiple values. So, I created a string in my function below that returns identifiers like "(34, 43, 54)" to be used in a SELECT IN. The function works fine, but the select command fails. How can I get the SELECT to work?
CREATE TABLE PRODUCT (
PRODID NUMBER,
PARENTID NUMBER,
CATID NUMBER,
ALIAS VARCHAR2(128)
CREATE OR REPLACE FUNCTION FIND_PRODS_BY_PATH
(CAT_ID IN NUMBER, IN_PATH IN VARCHAR2) RETURN VARCHAR2 IS
PROD_IDS VARCHAR2(1024);
BEGIN
PROD_IDS := '(';
FOR PROD IN (SELECT PRODID, SYS_CONNECT_BY_PATH(ALIAS, '/') AS PATH FROM PRODUCT
    WHERE CATID=CAT_ID CONNECT BY PRIOR PRODID=PARENTID)
LOOP
    IF REGEXP_LIKE(PROD.PATH, IN_PATH) THEN
      IF LENGTH(PROD_IDS) > 1 THEN
        PROD_IDS := PROD_IDS || ', ';
      END IF;
      PROD_IDS := PROD_IDS || PROD.PRODID;
    END IF;
END LOOP;
PROD_IDS := PROD_IDS || ')';
RETURN PROD_IDS;
END FIND_PRODS_BY_PATH;
*** Doesn't like the varchar2 returned from the function ***
SELECT * FROM PRODUCT WHERE PRODID IN FIND_PROD_BY_PATH(5, '/my/product/path/*');
Error report:
SQL Error: ORA-01722: invalid number
*** Function works ***
SELECT FIND_PROD_BY_PATH(5, '/my/product/path/*') FROM DUAL;
FIND_PRODS_BY_PATH(5, '/my/product/path/*')
(301152, 301202, 301252, 301302, 301403)

Your function is effectively returning a single string, which is not automatically devived into individual tokens for using in the IN clause.
How to circumvent this is best described here:
http://www.oracle.com/technology/oramag/oracle/07-mar/o27asktom.html
(search for "Varying IN Lists")

Problem with MySQL - WLS61:General error: select command denied to user: 'foo@lion.e-pmsi.fr' for table 'finess'

Hi
I've been trying to adapt and deploy an enterprise appliaction developped and deployed
before under JBoss.
My database is MySQL and I use Together Control Center for development and hot deployment.
After having modified a lot of things (the seamless protability seems always sor
far :), now I get some strange error when deploying from withing Together Control
Center 6.0:
WLS61:General error: select command denied to user: '[email protected]' for table
'finess'
Off course the user foo has all possible and imaginable rights.
Does anybody have an idea on how to get around it ?
Thanks
Alireza

Found the answer... email that went to junk mail. Hope this helps others!
Hello Subscription User,
Thanks for choosing ClearDB for your database needs. We appreciate your business and
your interest in our services. Our commitment to all of our customers is that we
provide a high quality of service on all of our database systems. Part of that
commitment includes the enforcement of database size quotas in order to ensure
the highest quality of service for our customers.
As such, we're sending you this automated message regarding one of your databases:
Database: wp____
Tier/Plan: Mercury
Tier size quota: 20 MB
This database has either reached or has exceeded its maximum allowed size for the
'Mercury' plan/tier that it currently belongs to. As such, our systems were forced to
place a read-only lock on it. We kindly encourage you to upgrade your database
to a larger tier/plan so that we can restore write privileges and enable complete
access to it from your account.
If you feel that you have received this notification in error, please feel free
to contact us by replying to this email along with information that you feel may
assist us in assessing the situation with your database.
Thanks again for choosing ClearDB,
The ClearDB Team

Cannot change SELECT command Datalist

Hi ,
I have a datalist with a selectedcommand , but i want to change it at runtime ( i have a dropdownlist and want to search based upon the values of dropdownlist) , I used this in button click event:
if (DropDownList1.Text=="blabla")
this.SqlDataSource1.SelectCommand = "SELECT prodID,[Prodname], [Price], [ProdCode], [Weights], [Size], [Photo] FROM [Products] where Cat='ct1' and Price<10000 ";
this.SqlDataSource1.DataBind();
DataList1.DataBind();
but nothing happens. I also tried http://social.msdn.microsoft.com/Forums/sqlserver/en-US/b1d4a3a5-7ba3-4383-a52a-fd472f1aad11/change-sqldatasource-select-command-at-runtime?forum=Offtopic
but it doesn't work for me . any ideas ?

Hi,
Try the below code.
if (DropDownList1.Text == "blabla")
SqlDataSource SqlDataSource1 = new SqlDataSource();
SqlDataSource1.SelectCommand = "SELECT prodID, [Prodname], [Price], [ProdCode], [Weights], [Size], [Photo] FROM [Products] where Cat='@cat' and Price < @price";
SqlDataSource1.SelectParameters.Clear();
SqlDataSource1.SelectParameters.Add("cat", TypeCode.Int32, "1");
SqlDataSource1.SelectParameters.Add("price", TypeCode.Decimal, "1");
//your connection string from web.config
SqlDataSource1.ConnectionString = ConfigurationManager.ConnectionStrings["ConnectString"].ConnectionString;
DataList1.DataSource = SqlDataSource1;
DataList1.DataBind();
SRIRAM

Long select command

Similar Messages

Maybe you are looking for