Long Term Manpower Plan
Dear,
I would appreciate it if some one can help me in finding the best source or information about the Long Term Manpower Plan in SAP HCM, I dont know if it is in the new releases of compensation management or personal development / career and succession planning?
We are in SAP 4.6 c and Portal 6.0 with ESS and MSS, planning to upgrade soon,
Regards
Dear,
I would appreciate it if some one can help me in finding the best source or information about the Long Term Manpower Plan in SAP HCM, I dont know if it is in the new releases of compensation management or personal development / career and succession planning?
We are in SAP 4.6 c and Portal 6.0 with ESS and MSS, planning to upgrade soon,
Regards
Similar Messages
-
Hi,
Is there any new tool or sub module introduced in the next release (ECC 6.0) of HCM on Long Term Manpower Planning (between 3-5 years) for planning the manpower composition? We are on 4.6C & I have checked the Personnel Cost Planning & Quota Planning functionalities in SAP HR. These don't suit our purpose.
Thanks & regards,
SameerHi ,
1.In the Longterm planning check till what duration your planning scenario is valid.
2. also if you have maintained the planned independent requirement check if the values are available for the future periods.
You can check this in primarily .
reg
DSK -
Long term, interactive planning
Hi,
I have having problem in long term planning
In MS annual planning, i can see that till 2008 planned order has been created.Ater firming and run MD43, i can see only few months not all month for next year.After i save this and go to MD15 i cant see required planed orders for next year.
Please let me know where exactly is the problem.I request everyone to give me some solution as it is ver urgent.
regards
satyajit kumarHi Geeta,
I had checked the period that time only. It's ok. I think problem is some where else. Anyway thnx for your response.Plz get back to me if you find anyhting else on this issue.
Regards
Satyajit Kumar -
My friends in my scenario employee who goes for long term disability
during his first period(three month) he should be deducted 75% of pay
during his second period(three month) he should be deducted 50% of pay
remaining period 10% of pay.
For me for all the month deduction of 75% only happening. Remaining rules are not working.
I configured everything related to that. Still it s not working out.
Please guide me.In IMG USA -> Abscences ->
->Describe Absence Valuation Rules
Here i gave the text for the rule.
->Assign absences to valuation classes
In this I assigned the rule no for the PSG and abscenc type 202
Short/Long-Term Disability (STD/LTD) Plans
Establish and define short/long-term disability plans
In this i Created the plan intervals as I mentioned earlier
Prepare payroll for processing pay related to STD/LTD plans
->Check split payment valuation rules for STD/LTD plans
Here for those rule which i created - assigned the wage type M864.
->Check absence breakdown for STD/LTD plans
I linked all the rules. -
Long term planning,mid point scheduling,finite scheduling
Dear Sir,
Please explain the Long term planning,mid point scheduling and finite scheduling in simple words
thnx.Hi,
LTP: Long term planning used to simulate your future production plan. Based on your future production plan, you can check by simulation, loading the products requirements in the inactive planning version and defining the inactive planning version in the scenario and you can execute the MRP run. Then the system will create the capacity requirements and you can see the overloads. Based on this simulation run, you can include any new work centres and increase the manpower or increase the shifts.
Finite Scheduling: This will consider the real details, like the no of work centres and working hours per day and working days in a year and considering the existing loads. This is called finite scheduling. R/3 does infinite scheduling. If the capacity not exist also you can release the production orders.
Regards,
V. Suresh -
Long Term Planning-Planning File Entry
Hi Gurus/Friends
In the long term planning after PIR with inactive version and creating Scenario, assinging versions, Plants,....then
during Release+Save it is giving the Result of Planning File Entries
Logically the system has suppose to give the Number of Planning File Entries in Propotionate to the Specific Planning Scenario number and materials inside
But it is giving for all the Materials inside the Plant
Is there any settings to restrict the Planning File Entry creation w.r.t Planning scenario during Release+Save
other than the solutions through Transaction MS20,MS22 and MSAB
(Because during Release+save logically it has to call the MS22 t.code and do planning file entries for the materials in that scenario)
Awaiting for reply
thanks
K.PrabakaranHi,
Please Refer Below SAP help .
*Releasing a planning scenario*
You first have to release a planning scenario before you can plan it in the long-term planning run. When you release the planning scenario, the system creates planning file entries for all materials in all the plants allocated to the planning scenario. There is a separate planning file entry for this purpose. This guarantees that your operative planning is kept completely separate from your simulative planning. This long-term planning file contains all the materials that are also contained in the operative planning file. After the release, every change relevant to MRP triggers an entry in the planning file as in operative planning.
Pradeep
Edited by: Pradeep Kumar on May 9, 2008 4:22 PM -
Excluding storage location from MRP run in Long Term Planning
Hi,friends,
In my scenario , i want to exclude storage location from MRP run in long term planning.When i set storage location MRP indicator "2" in SPRO and SLoc MRP indicator "1" MRP4 in material master, i can exclude the storage location after run MRP with MD01/MD02,and i can see the expected result in MD04.But in Long Term Planning scenario the storage location can not be excluded after run MRP with MS01/MS02,and the requirements list in MS04 include the stock in the storage location i want to exclude. i dont know if i miss something.Plz give me some advice.
Regards
JoeyHi,
Refer the OSS Note 208017 - LTP: Long-term planning and storage locations
==========================================================================
Symptom
In long-term planning (Transactions MSBT / MS01 / MS02 / MS03), the MRP indicator of a storage location for a material is not taken into account (material master, view MRP 2 [up to and including Release 3.1I] or MRP 4 [as of Release 4.0A]).
The storage locations excluded by MRP or planned separately are also planned in the plant segment.
Additional key words
LTP, MM01, MM02, MM03, master data, MRP indicator, LGORT ...
Cause and prerequisites
The MRP indicator for a certain storage location of a material is only taken into account in operative planning (requirements planning, MRP).
The long-term planning occurs exclusively at plant level.
Solution
This is no error. The system works as intended.
The individual storage locations should not be distinguished in the long-term planning, in order to perform a comprehensive long-term planning.
This is important, for example, within the kanban processing where the storage locations with kanban MRP are excluded from the MRP, but in spite of that should be included in the long-term planning.
==========================================================================
Regards,
Siva -
Extracting LTP (Long Term Planning) Data from SAP ECC to SAP BW
Hello all
Here is the task in hand. There is a standard report that Production Planners execute post their MRP/LTP runs. This report can be accessed through T-code "MCB)". The program in action is RMCB1200. I tried looking for any standard extractors but to no avail. I would be fine to know either or both of the following:
An extractor
All the primary tables involved ( I have found a few tables through the program but a list by some expert will help me understand that I have not missed anything significant)
Also, if anyone has done this before, how was your experience with the extraction in terms of extraction volume and performance.
Regards
GajendraAfter further digging, here is some information that I found out.
T-code
Program
BADI
MSEX
RMDMRPEXTRACT02
MD_SR_LIST_EXTRACT
This could possibly provide the data required. The program can be scheduled and the output can be managed by SPRO settings for Extraction Mode. I am running tests to confirm if it provides me the correct information and matches with MCB) output.
Here are some tables, just for reference:
LTP Tables: PLSC, PBHI, PLPT, MDTP, PLPR, PLPB
MRP Records:
MDKP
MRP Document Header Data
MDTB
MRP Table Structure (no data)
PLSC
Planning Scenario (Long-term Planning)
MDFD
MRP Firming Dates
MDVM
Planning File Entries
S094
LIS -- Stock/Requirements Analysis -
How to consider the Purchase Orders in Long Term Planning
Hi All,
I wanted to include the Purchase Orders of Finished Material in Long Term Planning.
I have selected the check box "Long-term planning: include firmed issues and receipts" in the Planning Scenario but after LTP run system is not considering the Purchase Orders of Finished Materials for Planning.
Regards,
Shailendra
Edited by: Shailendra Hadkar on Apr 5, 2010 12:41 PMDear,
Could you please explain usage of purchase orders for Finished product?
Regards,
SAP CONS -
I need to stock available qty at long term planing (ms05) not calculate some location that qty status nettable.
Example : Location yy stock onhand 100 EA (Nettable)
Location xx stock onhand 10 EA (Nettable)
MRP display stock available 100 ea but
Long Term Planning display stock available 110 ea (I need to display 100 ea same MRP because MRP can set config exclude from MRP)
Please advise me?Hi,
Can you make this Location stock XX as blocked or Restricted stock, then you will be able to exclude it from the Net requirement calculation.
By deselecting the Blocked Stock or Restricted use stock for avaialbile stock in Avaialble stock configuration. -
Implementing Long-Term Planning
Dear Guys,
Is that possible to implement Long-Term Planning (LTP) in SAP when there is no SOP module in the system. Would you please inform me the basic requirements or basic setup to implement LTP in SAP system.
Thank you in advance!Hi Payam,
This is always recommended to implement LTP if you have long lead times for some procured parts, bottle necks in capacities for work centers and most important to plan about budget required for the production of those parts.
The above things you cannot check with STP/MTP and perform changes after the STP/MTP runs. But this you can do with LTP with diffrent scenarios and compare it till you satisfy.
You can do the precosting of the parts and check what would be your future costing and plant budget.
You can transfer the requireemnst of the critical parts to vendors well in advance after LTP run and before running the actual planning for the entire year, so the vendors will be well prepared to supply you the parts.
You can also checks the capacities required for the production before the STP run.
If this is OK then please close this thread.
Regards
TAJUDIN -
Long-Term Planning (PP-MP-LTP)
Do you know BI content for Long-Term Planning (PP-MP-LTP)?
Not that I know.
Often business people actually mean SOP (BC: 0SOP_PLANNING) when talking about long-term planning. I don't see any point in reporting LTP that is more like alternative MRP scenarios. It is operational and different scenarios easily get confusing in reporting.
BR,Tuomas -
Long term planning in ECC for materials planned in SAP APO
Hi SAP PP and APO Experts,
I would like to know whether it is possible to plan a material in SAP ECC with Long Term Planning to create Simulative Planned Orders in ECC, when the MRP Type for the material is set to X0 (Planning in SAP APO).
Warm regards,
PremHi Dhaivakumar,
Appreciate your prompt response.
My business is MTS. I have made all settings for LTP planning for the material. (M|RP Type is set to X0-Planning in APO). When I execute the transaction MS02, I get the error message "Material 5200000013 J310 is not planned automatically. Message no. 61008". The details of the error message is:
The material 5200000013 in plant J310 or in MRP area is not included in automatic MRP because
either the MRP data for plant J310 or MRP area has not been created
or an MRP type has been entered for the material in plant J310 or MRP area that does not allow automatic MRP.
Warm regards,
Prem -
I can't see planned order in Long Term Planning Stock/requirements list.
Hi
I am trying to use Long Term Planning in SAP.
I created scenario dates from 01.03.2011 to 03.09.2011. Between those dates i entered planned independent requirements as 300.
When i went to Long Term Planning Stock/requirements list, i can see all planned independent requirements but i run Multilevel single-item planning and then when i went to Long Term Planning Stock/requirements list again, i couldnt see planned order for planned independent requirements.
So what is the problem? Can anyone help me please?
Thank you.HI
check the planning scenario in MS31 and the PIR assignment in MS31 also check the plant assignement.
Check In MD61 you have enter PIRs in simulation version and the same version is to assigned in planning scenario
Also check T code OPU5 for LTP setting for planned orders
Regards
Anupam Sharma
Edited by: anupam sharma on Sep 3, 2010 2:33 PM -
Inconsistent - Work Centre's Long-term Planning (KAKO-KAPLPL)
Hi Experts,
we're upgarding from SAP4.5 to ERP6.
I reviewed OSS note 950834, but it's not related.
We extracted from SAP4.5 Work Centre - Capacity Header - Long-term
Planning.
It's ticked (X) in CR03, but blank () in table KAKO-KAPLPL.
We loaded into ERP6 Work Centre - Capacity Header - Long-term Planning.
It's blank () in CR03, but ticked (X) in table KAKO-KAPLPL.
Please advise the fix for this issue.
Thanks,
ThomasDear Thomas,
I suggest you to check relevant OSS notes. Also creaete a OSS message for this issue.
thanks and regards
muru
Maybe you are looking for
-
????i have an old and a new adobe ID and a new one. need to link them . i have over 100 books from old id that will not open now on my ereader. please help
-
No volume only when logged in in lion
I am having trouble with my volume. The speakers are not the problem because when i boot it up, i get the Mac's startup sound loud and clear. After i log in to any of my accounts the volume gone. It is not on mute. I am running Mac OS X Lion. Please
-
DashCode opening randomly from TweetDeck
Everytime I open a web link from Desktop TweetDeck (Default web browser is Chrome) Dashcode appears in the dock, and the little light under it tells me it's running. THIS IS REALLY ANNOYING. How can I stop it? Thanks!
-
Importing photos - custom icon images
Whenever I import photos from a digital camera into iPhoto, the icons in finder are thumbnails of the actual photo. Is there any way to prevent this from happening, and have all the files have the default icon?
-
Error while opening Integration Builder
Hello guys, when i click integration builder link, instead of opening it it shows a dialog box saying "Do you want to open or save this file? directory.jnlp" Please resolve this issue asap. thanks