Long term planing.

Hi guys
what is long term planing. can anyone send me some info about that.
what is the diff between longterm planing and mrp.

Hi,
Basically LTP is simulative MRP to simulate and see all the results like production capacity plan/ raw material plan/ profit margin. here we are using the same master data like material master, recipe, BOM etc
In MS31 - you create a LTP version where you can mention the PIR version where you enter the planning data in MD61.
Please refer the link for complete details,
[Long Term Planning|https://forums.sdn.sap.com/click.jspa?searchID=16254554&messageID=6097199]
Please go through this link also,
http://help.sap.com/saphelp_47x200/helpdata/en/92/bf055544bd11d182b40000e829fbfe/frameset.htm
Regards,
R.Brahmankar

Similar Messages

  • MS05 Long Term Planning

    I need  to stock available qty at long term planing (ms05) not calculate some location that qty status nettable.
    Example : Location   yy   stock onhand 100 EA   (Nettable)
                    Location   xx   stock onhand 10  EA    (Nettable)
         MRP                          display stock available 100  ea  but
         Long Term Planning     display  stock available 110  ea  (I need to display       100 ea  same MRP because MRP can set config exclude from MRP)  
    Please advise me?

    Hi,
    Can you make this Location stock XX as blocked or Restricted stock, then you will be able to exclude it from the Net requirement calculation.
    By deselecting the Blocked Stock or Restricted use stock for avaialbile stock in Avaialble stock configuration.

  • Long term, interactive planning

    Hi,
    I have having problem in long term planning
    In MS annual planning, i can see that till 2008 planned order has been created.Ater firming and run MD43, i can see only few months not all month for next year.After i save this and go to MD15 i can’t see required planed orders for next year.
    Please let me know where exactly is the problem.I request everyone to give me some solution as it is ver urgent.
    regards
    satyajit kumar

    Hi Geeta,
    I had checked the period that time only. It's ok. I think problem is some where else. Anyway thnx for your response.Plz get back to me if you find anyhting else on this issue.
    Regards
    Satyajit Kumar

  • Lot Sizing for Short/Long Term

    Hello All,
    I tried the lot sizing with the short term/Longterm pattern..
    But I'm facing the following problem..
    I have maintained periodic lot sizing according to the planning calendar(Weeks from Saturday to Friday) for the first month...( Requirement date = period end)
    And for the other 2 years I have defined periodic lot sizing with Monthly lot size ( Requirement date = period end).
    But running MRP, the system Cumulates all the monthly requirement from the 2 nd period and creating the order proposal with the order end date of the months first planning calendar week. But I'm expecting the system to create the order proposal with the month's last date as the order end date .
    Whether my expectation is incorrect or any other settings to be maintained to achieve this.
    Thanks & regards,
    Mahesh

    Hello Mahesh,
    You can get the results without maintaining the planning calendar..Just change the lot size procedure WB :weekly lot size" and take out the planing calendar and maintain the settings as per below.
    In the period lot sizing procedure WB maintain the number of periods 1 for the period of short term period with weekly lot size. then in "end of the short term period" maintain the initail value " months: and define number of periods 24.
    maintain the same values for long term period i.e period 1 with period lot sizing procedure (monthly lot size).
    By doing the above you will get the weekly lot size for the first 2 years and then monthly lot size for the rest of the requirements.
    If helpful rewards your points.
    Regards
    TAJUDDIN

  • Capacity requirement for long term planning and make to order planning

    hello,
    anybody please guide me.
    my client using make to order scenarion and we are doing regulaly MRP run is MD50 with refernce to sales order.
    sales orders planning will follow for 2 to 3 months.
    at the same time my client wants to do long term planning also. to analize the capacity.
    for that he is creatind planning scenario and multi level planning with MS02 also.
    But the problem is when they are checking capacity requirement in cm38 it is showing only planning scenario load only. my client wants existing load and longterm planning load also. so they can plan the planning is sutibale in existing plan.
    so how can i get both plan in CM 38or is there any other T.code to get that data.
    please suggest me
    Thanks & Regards
    Bhakta

    Hi Pierre and Rajesh,
    When we create the simulation version, you have the possibility to choose the short-term planning. My point of view is, you can use the LTP fonction to do your scheduling for ex the next 3 months.
    I think it's what Pierre did. Am I right ?
    between to scheduling scenario to deliver my customer. With the simulation mode I can do my scheduling + use the MRP simulation to check if the raw material are available or not. Then use the MD04 to do the comparaison (or MS04 to compare between 2 scenario).
    But I found 2 problems :
    First : I don't find the parameters to show in the graphic MFS0, the planed fix order (I can only see the process order)
    Second : When my scheduling is finished, I want to update my operational planning with the simulation version. But I don't want to do article by article : when you have 400 references (raw mat, packaging, finish goods)  it's impossible (same issue like Pierre)
    Have you found a solution for this 2 points ?

  • I am a long-term user of Lightroom as a standalone product with a perpetual licence. As a retired person on limited income, it is very disappointing to me that Adobe have introduced the 'Creative Cloud' (CC) subscription service in order for me to be able

    I am a long-term user of Lightroom as a standalone product with a perpetual licence. As a retired person on limited income, it is very disappointing to me that Adobe have introduced the 'Creative Cloud' (CC) subscription service in order for me to be able to continue upgrading this excellent product. It will be for me too expensive at the minimum cost of £9 per month. The additional services that CC brings are personally of no relevance or usefulness. Adobe should be prepared to support existing users who are, like myself, non commercial, amateur photographers by giving them the simple opportunity to upgrade to Lightroom 6 as a standalone, perpetual licence product. As a member of a camera club I know my co-members who use Lightroom are equally disappointed by this move to a subscription-only service.

    john beardsworth wrote:
    John Waller wrote:
    However, Adobe will soon introduce Cloud only features into Lightroom CC for which LR6 (perpetual license) owners will have to wait until LR7 (paid upgrade).
    That is possible, John, but it is only speculation on your part. Might, not will.
    kwdaves wrote:
    There is a "Lightroom 6" upgrade available for US $79 if you have a valid license for any of the earlier versions. From what I can tell, the only difference between Lightroom 6 Full, Lightroom 6 Upgrade and LightroomCC is in the license. The download file is the same.
    Other differences - with CC you get LrMobile/LrWeb and they throw in a free copy of Photoshop too.
    Yes, but when I bought my standalone license and clicked on the "Download" button it took me to the LightroomCC page. The downloaded file is named Lightroom 6, but in the CC app the installed program is LightroomCC (2015).

  • HT3053 Can I run my MacBook Pro Late 2008 without battery forever? Is it bad in long term or anything? Does it make the system less stable?

    Can I run my MacBook Pro Late 2008 without battery forever? Is it bad in long term or anything? Does it make the system less stable?
    My battery got swollen (and I unfortunately noticed it very late and might have be running with it for months, which potentially explains all the crashes everyday and the trackpad not working anymore, the Apple test also says I have a bar of ram broken...) and I had to remove it because the back pannel did not close anymore... Can I still use my MBP normally forever that way? I was planning on buying a new mac anyway but maybe waiting for the next iMac upgrade in the year... Should I wait?

    Other than the system shutting down instantly if you have a power outage, whcih could corrupt the OS. Nothing else bad will happen.

  • I'm an American living on a timed (though long-term) assignment in Ireland. I have both American and Irish bank accounts and addresses. I have two Qs. 1. Can I use the US Adobe site when in Ireland? Or will my physical location prevent me from doing so? 2

    I'm an American living on a timed (though long-term) assignment in Ireland. I have both American and Irish bank accounts and addresses. I have two Qs. 1. Can I use the US Adobe site when in Ireland? Or will my physical location prevent me from doing so? 2. I am working for a not-for-profit organization. Is there a special pricing plan for non-profits, similar to the plans for students, small business, etc? Thanks for whatever help you can give me. (P.S. As a potential customer and past user of Adobe products for 15  years, I find it INCREDIBLY FRUSTRATING that I cannot speak with any Adobe representative, but am continually re-routed instead to a public forum to get what I hope will be accurate information. Not good, Adobe. Your products are amazing. Your customer service leaves a lot to be desired. I don't mean that with disrespect, but as honest feedback.)

    Hi bookchic
    Thanks for your feedback.
    Non-profit pricing is available to eligible institutions via the VIP program which is sold by resellers - see Eligibility guide
    For details of resellers please check here: Adobe Platinum Partners – Value Incentive Plan
    If you wish to purchase an individual plan via Adobe.com the country of your Adobe ID will determine which site you order from.
    Kind regards
    Bev

  • I am a very long term customer how is now very disappointed with Verizon!

    I am writing in to give one final try at gaining a positive response from Verizon.  I called in to talk to Customer Service today with a request and was really disappointed at getting a NO for a response.   I have a family plan with 4 phones of varying contract/upgrade dates.  Mine…6/10/15. Wife’s…5/29/14.  Mom’s…6/20/13.   Son…4/11/16.  Two of the phones are past their date and thus we can upgrade without additional fees.   I will be disconnecting my mom’s phone as she hasn’t used it since 8/6 and won’t be using it as she is moving into a Memory Care facility for Alzhiemers.   Thus my request was whether there was a way to upgrade my phone and my wifes phone to the iPhone 6 without having to pay an added fee for upgrading mine early.   I asked that they take into account that my mom’s is 16 months past her upgrade date, I am 9 months from mine and we are very very long term customers. Verizon has been our cell phone company ever since we bought cell phones a long time ago.  I was told NO.    I then told the service rep that if I have to wait until 6/10/15, I have no real reason to stay with Verizon as saying no to this request just makes no sense when it is being ask by a customer of such long standing.  I was told NO again.  Even though I am clearly not a customer that hops from one cell phone service provider to another...Verizon told me NO.  Even if it costs a bit more to switch to AT & T (which it may or may not...I don't know)…on 6/11/15 my wife and I will be leaving Verizon and my son can have an individual account.

    You sign a contract promising to a 2 yr service commitment in exchange for a substantial discount on a phone. You are 9 months from completing your commitment. There is no reason for Verizon to grant your request. In fact, they may be contractually obligated to NOT do so depending on their terms for selling the iPhone negotiated with Apple.
    In the past, Verizon has been lenient(by a month or 2 but never 9 months) with approving an early upgrade, but NEVER with an iPhone. The reason for this has been hinted at being because of the contract terms Verizon has with Apple. Verizon is not going to jeopardize their ability to have iPhones on their network to satisfy your demand.
    Currently, there is a limited time offer to upgrade early with Verizon if you are eligible to get a discounted upgrade by 11/15/2014. Unfortunately you fall outside of that window.
    Good luck with the new provider, you will be unlikely to ever get an early upgrade at another provider either.

  • Transfer of results From M.I.C to Batch in case of Long Term Inspection

    Hi Gurus,
    We have maintained long term inspection in the control indicators in the inspection plan and also assigned Class Characteristics to M.I.C.
    We are following these procedure for Result recording.
    1) we are doing U.D and then posting to unrestriced stock
    2) We are doing result recording.
    In our case the result from M.I.C are not transferred to Batch
    and the Status is Long Term Inspection,Short inspection completed and transfer posting completed.We are not getting Status Long Term Inspection completedand the results are not transferred to batch.What might the reason for this.
    Regards
    Amit

    You must redo the UD to have the results transfer.  (Providing of course your setup is correct and the transfer happens for regular characteristics at the first UD)
    I would recommend that you create two UD codes.  The first one might be ALTP - Accepted, Long-term Pending.
    After the LT characteristic is recorded, use QA12 to change the UD to ACC - Accept.  When you save, the resutls should be transferred.
    Craig

  • Creation of New Special GL Indicator for customer long term accounts

    Hi Experts,
    We have a GL account (GL111) created for Long term accounts. this is a reconciliation account for customer. However, we have another GL account (GL222) assigned to our customer group this account is being invoiced for some expenses. Because of this we cannot assing GL111 to customer master data.
    We need to post in the same customer expense and loans. How can we create a new special gl indicator that will allow the posting from GL222 to GL111?
    Any inputs are very much appreciated. Thank you very much.

    Hi,
         Creating Own Special G/L Transactions: Specify  (OBYR-T.CODE)
    -  The account type for which the special G/L indicator is to apply
    -  Posting keys (for outgoing and incoming debit and credit postings)
    -  How it is posted
    - Properties for each special G/L indicator (noted item, relevance for the credit limit check, Warning message for liabilities and target special G/L indicator)
    -  transaction type (bill of exchange, down payment etc.).
    EXP:Go to T.code: OBYR path: Financial Accounting (New)>Accounts Receivable and Accounts Payable>Business Transactions>Down Payment Made>Define Alternative Reconciliation Account for Down Payments click on Define Alternative Reconciliation Account for Down Payments and click on double click on K F Pmt req Down Payment Requests and click on Properties (F8) and tick the Noted items ,Target sp.G/L ind. AIMB1 and save .
    Regards
    Sridhar
    Edited by: sridhar.shetty on Feb 28, 2012 1:21 PM

  • Long Term Planning-Planning File Entry

    Hi Gurus/Friends
    In the long term planning after PIR with inactive version and creating Scenario, assinging versions, Plants,....then
    during Release+Save it is giving the Result of Planning File Entries
    Logically the system has suppose to give the Number of Planning File Entries in Propotionate to the Specific Planning Scenario number and materials inside
    But it is giving for all the Materials inside the Plant
    Is there any settings to restrict the Planning File Entry creation w.r.t Planning scenario during Release+Save
    other than the solutions through Transaction MS20,MS22 and MSAB
    (Because during Release+save logically it has to call the MS22 t.code  and do planning file entries for the materials in that scenario)
    Awaiting for reply
    thanks
    K.Prabakaran

    Hi,
    Please Refer Below SAP help .
    *Releasing a planning scenario*
    You first have to release a planning scenario before you can plan it in the long-term planning run. When you release the planning scenario, the system creates planning file entries for all materials in all the plants allocated to the planning scenario. There is a separate planning file entry for this purpose. This guarantees that your operative planning is kept completely separate from your simulative planning. This long-term planning file contains all the materials that are also contained in the operative planning file. After the release, every change relevant to MRP triggers an entry in the planning file as in operative planning.
    Pradeep
    Edited by: Pradeep Kumar on May 9, 2008 4:22 PM

  • Long-term  retention backup strategy for Oracle 10g

    Hello,
    I need design a Archivelog, Level 0 and Level 1 long-term retention backup strategy for Oracle 10g, It must be based in Rman with tapes.
    ¿Somebody could tell me what it's the best option to configure long-term retention backups in Oracle?, "CONFIGURE RETENTION POLICY TO RECOVERY WINDOW OF 1825 DAYS;" It's posibble ?
    Regards and thanks in advance

    Hello;
    RECOVERY WINDOW is an integer so yes its possible. Does it make sense?
    Later My bad, this is Oracle 11 only ( the gavinsoorma link ) . Getting harder and harder to think about 10. Don't think I would use RECOVERY WINDOW.
    I would let the tape backup system handle the retention of your rman backups.
    Using crosscheck and delete expired commands you can keep the catalog current with the available backups on tape.
    Oracle 10
    Keeping a Long-Term Backup: Example
    http://docs.oracle.com/cd/B19306_01/backup.102/b14191/rcmbackp.htm#i1006840
    http://web.njit.edu/info/oracle/DOC/backup.102/b14191/advmaint005.htm
    Oracle 11
    If you want to keep 5 years worth of backups I might just use KEEP specific date using the UNTIL TIME clause :
    keep until time 'sysdate+1825'More info :
    RMAN KEEP FOREVER, KEEP UNTIL TIME and FORCE commands
    http://gavinsoorma.com/2010/04/rman-keep-forever-keep-until-time-and-force-commands/
    Best Regards
    mseberg
    Edited by: mseberg on Dec 4, 2012 7:20 AM

  • Hi I want to buy an unlocked iPhone 5in the Middle East. I want to know if I will be able to use my iPhone and all its applications when we go back to live in the US for long term.

    Hi I want to buy an unlocked iPhone 5 in the Middle East. I want to know if I will be able to use my iPhone and all its applications when we go back to live in the US for long term.
    Thank you

    Apple Online Store sells unlocked iPhone in the following countries: Australia, Austria, Belgium (French, Dutch), Brazil, Canada (English, French), China, Czech Republic, Denmark, Finland, France, Germany, Hong Kong (English, Chinese), Hungary, Ireland, Italy, Luxembourg, Malaysia, Mexico, New Zealand, Netherlands, Norway, Poland, Portugal, Singapore, Spain, Sweden, Switzerland (French, German), Taiwan, Thailand, United Arab Emirates, United Kingdom, and United States.
    You can probably be absolutely sure any other source will be carrier locked
    It also appears that only Zain offer unlocking (of all the ME carriers )  in Jordan and Bahrain
    A ME iPhone 5  ( A1429 GSM )will not  work on US LTE when you return 

  • Long term: Mountain Lion or Snow Leopard

    Hi,
    Had to have new hard drive installed a few days ago. System was "upgraded" to Mountain Lion. I had a backup from TimeMachine but for whatever reason, when configuring hard drive it would not see my external hard drive so I had to restore applications manually (read one by one) after "blank canvas" configuration. Now I find out all my powerpc-based applications wont work because Apple has not renewed licensing for Rosetta (info gathered from Communities). My powerpc applications are Adobe Photoshop and Illustrator, Microsoft Office 2011, turboCad, etc.
    I found out I have two options:
    1) Erase hard drive and Restore from TimeMachine to previous hard drive contents from 10 days ago, which run on Snow Leopard (which I had downloaded, so no disks). Will this work?
    2) Install Parallels 7 or VM firmware, and somehow install Snow Leopard there and run my powerpc applications from there. How to do this I have no idea...
    Long term:
    If Apple will never restore Rosetta or powerpc capabilities, should I go with option 2 and get on with the "new world"? I'm not too technically savvy and not sure how I can do this on my own... so would need to go see the Geniuses for this, I guess...  But I'm not sure what the advantages of Mountain Lion are! So far, I dont see much, and I am not sure I would know how to maintain a "Parallel PC universe" without doubling everything.
    Since I'm not sure of any advantages to Mountain Lion, I should maybe go back to my Snow Leopard version, then? but I am not sure how, exactly, without loosing everything once more.
    Of course, if someone knows there are powerpc capabilities for Mountain Lion in the future, then I am all set, right? Does anyone know how Apple or Microsoft plan to "help" us poor souls who choose Mountain Lion without being aware of these issues?
    (note: I have moved three times in the past two years and cannot get my hands on my iWorks CDs or my Microsoft Office 2011 CDs)
    Any recommendations?

    Dropping Rosetta was a technical decision. As stated, Apple has traditionally only supported it's current and last OS versions.
    There are tons of advantages to updating to Mountain Lion, assuming your hardware supports it. Look HERE for details and HERE for hardware compatibility and instructions on how to upgrade properly.
    Alansky is correct that this is not new news as well. He also is correct in saying that Rosetta will never again be supported. If I remember correctly, the last PowerPC version of Photoshop is CS2 released in 2005. That's 7 years and 4 major releases ago. Sorry to say, but it is time to bit the bullet, move to Mountain Lion and update your legacy software.
    I am using Microsoft Office for Mac 2011 and it runs fine on Mountain Lion 10.8.
    You can certainly install and run Snow Leopard in a Parallels partition but I don't recommend it. Take a look HERE for details.
    Not having your Office install disks sounds suspicious but we'll assume that you have a legal copy. In that case, you should be abe to contact Microsoft HERE for assistance in retrieving your product key and getting a download link.

Maybe you are looking for