Long Term Planning get problem!

Hi Gurus!
          I use LTP for simulation but after I run MS01, I check in MS04, no SimPlannedOrder is generated.
          I'm used to do with LTP many time before but it never happend like this.
          When I explode IndReq in MS04, It has a message "Coverage not provided by master plan"
More infors: All FG ans RM in my client are maintained with Range of Coverage profile(Dynamic Safty Stock). Last projects I've never use Rang of Coverage Profile and LTP has never gotten problem.
Is it because some SAP note or I forgot something?
Please advise me.
Best Regards,
Tony

Dear Guru!
Somebody help me?
Regards,

Similar Messages

Long term planning-Scheduling problem

Hi Experts,
When I am doing Long term planning run MS02, i am facing the following problem:
There are 10 stages of operations to make a finished product. Each stage having different order types and planned orders are created at each stage.
For the last stage material i am doing the Long term planning ( ie. Raw material)
After running MS02, The results are like this:
the scheduling for the first 6 stages are according to the requirement dates.
But the last 4 stages the scheduling is not correct. The system is combining 10 days requirement and giving only one planned order.
I want seperate planned orders date wise.
Please give me a solution.
Thanks & Regards
Bala

Hi Dharma,
There is no planning calendar or period lot size assigned for any materials.
MRP type is PD for all materials except the long lead time material and the lot size is EX.
For the long lead time material ( ie. the bottom stage material) MRP type is M1 and lot size EX.
Thanks & Regards
Bala

Long Term Planning Issue - Transaction MS04

Hi Experts,
I have two problems looking for solution from you.
1. Transaction Code MS04 -> After entered Planning Version, Material and Plant... I can see list of orders in the report. If I click Production Order, Planned Order, Inspection Lot document Element Details (on left hand additional function) and I am able to double click and display these documents. However If I double click Material Reservsation document It is not allowing me as I can't see "Display element (F7) Icon. How do I get the display element icon for Material reservation document also.
2. We have a lot of Quality Inpsection lots documents when we display in MS04 report but the problem here it is peggeging as requirements in Long term planning report. We want to just display the document here not as requirements.
Please let me know the solution for above two.
Regards
Rc Gopi

Dear NNeeti,
1.In CM38-->in the top menu --->under Planning ->Profiles->Overall Profile.
2For this over all profile check the Details in OPA6 T Code and find out the option Profile assigned to this over all profile.
3.Edit the details of this Option profile in OPA3 (change the number of days as 730 instead of 365 in the finish date).
Check with this setting in CM38 and proceed.
Check and revert
Regards
S Mangalraj

Capacity requirement for long term planning and make to order planning

hello,
anybody please guide me.
my client using make to order scenarion and we are doing regulaly MRP run is MD50 with refernce to sales order.
sales orders planning will follow for 2 to 3 months.
at the same time my client wants to do long term planning also. to analize the capacity.
for that he is creatind planning scenario and multi level planning with MS02 also.
But the problem is when they are checking capacity requirement in cm38 it is showing only planning scenario load only. my client wants existing load and longterm planning load also. so they can plan the planning is sutibale in existing plan.
so how can i get both plan in CM 38or is there any other T.code to get that data.
please suggest me
Thanks & Regards
Bhakta

Hi Pierre and Rajesh,
When we create the simulation version, you have the possibility to choose the short-term planning. My point of view is, you can use the LTP fonction to do your scheduling for ex the next 3 months.
I think it's what Pierre did. Am I right ?
between to scheduling scenario to deliver my customer. With the simulation mode I can do my scheduling + use the MRP simulation to check if the raw material are available or not. Then use the MD04 to do the comparaison (or MS04 to compare between 2 scenario).
But I found 2 problems :
First : I don't find the parameters to show in the graphic MFS0, the planed fix order (I can only see the process order)
Second : When my scheduling is finished, I want to update my operational planning with the simulation version. But I don't want to do article by article : when you have 400 references (raw mat, packaging, finish goods) it's impossible (same issue like Pierre)
Have you found a solution for this 2 points ?

Long-Term Planning (PP-MP-LTP)

Do you know BI content for Long-Term Planning (PP-MP-LTP)?

Not that I know.
Often business people actually mean SOP (BC: 0SOP_PLANNING) when talking about long-term planning. I don't see any point in reporting LTP that is more like alternative MRP scenarios. It is operational and different scenarios easily get confusing in reporting.
BR,Tuomas

Long term planning in ECC for materials planned in SAP APO

Hi SAP PP and APO Experts,
I would like to know whether it is possible to plan a material in SAP ECC with Long Term Planning to create Simulative Planned Orders in ECC, when the MRP Type for the material is set to X0 (Planning in SAP APO).
Warm regards,
Prem

Hi Dhaivakumar,
Appreciate your prompt response.
My business is MTS. I have made all settings for LTP planning for the material. (M|RP Type is set to X0-Planning in APO). When I execute the transaction MS02, I get the error message "Material 5200000013 J310 is not planned automatically. Message no. 61008". The details of the error message is:
The material 5200000013 in plant J310 or in MRP area is not included in automatic MRP because
either the MRP data for plant J310 or MRP area has not been created
or an MRP type has been entered for the material in plant J310 or MRP area that does not allow automatic MRP.
Warm regards,
Prem

I can't see planned order in Long Term Planning Stock/requirements list.

Hi
I am trying to use Long Term Planning in SAP.
I created scenario dates from 01.03.2011 to 03.09.2011. Between those dates i entered planned independent requirements as 300.
When i went to Long Term Planning Stock/requirements list, i can see all planned independent requirements but i run Multilevel single-item planning and then when i went to Long Term Planning Stock/requirements list again, i couldnt see planned order for planned independent requirements.
So what is the problem? Can anyone help me please?
Thank you.

HI
check the planning scenario in MS31 and the PIR assignment in MS31 also check the plant assignement.
Check In MD61 you have enter PIRs in simulation version and the same version is to assigned in planning scenario
Also check T code OPU5 for LTP setting for planned orders
Regards
Anupam Sharma
Edited by: anupam sharma on Sep 3, 2010 2:33 PM

Vendor's long term plans regarding actualizations

Hi,
Possibly we will decide in 2014 to purchase MBP.
It will be than the first Apple's product in our environment.
If it should run that way we expect to use the mbp for approximately
next 10 years.
How does the Apple's current long term plans conform with the above target
regarding actualizations (bug fixes, security patches) for
OS and all other on-board software of mbp version currently in sell?

molom wrote:
dav7 wrote:
Oh, and the medium I want to use needs to scale high. Very high. Into the order of more than a decent amount of TBs... like, say, 40 or 50. Of course that nice, round figure wouldn't pop up out of nowhere the day I have my plans in order, it'd grow - slowly - over time. So not only do I need something scalable, I need something that can scale slowly.
So kinda like a NAS or external HDD type of solution, except one that doesn't use failure-prone media like HDDs. Unless there's a kind of hard disk out there that doesn't fail very "easily" and lasts in an order of years?
-dav7
I believe there is nothing that exists in the world, unless you pay huge money for Solid State Hard Drives. The only solution I see is using a bunch of rewritable double layer Blu-ray discs. I don't think there is any proper solution for what your looking for. Your looking for the perfect that doesn't exist.
I'm not sure how long SSDs will last and I don't think there is any reliable information out there, wether an SSD I plugin now will still work in ten years. Plus you would need one hell of a lot SSDs to store Terabytes of data. BlueRay is probably worse than DVD regarding reliability, until the manufacturers get more experience with them.
Am I the only one to see a pattern with dav7 opening threads looking for things which don't exist?
Last edited by Garns (2008-10-08 13:39:29)

Report on Long term Planning

Hi Gurus,
Is there a std SAP report in PP which gives out the demand of a material based on long term planning and also informs the actual consumption of the material other than MD62 , MD73, by which we can have a variance of planned demand and actual consumption displayed.
Edited by: Raj Muthu on Feb 1, 2008 11:14 PM

Dear,
You can use MD67 to see the demand in excel or on the screen...consumption i donot think you will get so easily...

Use Reorder Point Planning and see VSE Requirements in Long Term Planning

Hello,
I would like to use reorder point planning short term and something similar to MRP planning long term. I am trying to drive actual production off of consumption and plan long term for capacity, inventory and BOM components. Our plan is to delete the near term forecast and leave the long term forecast in to show requirements for LTP.
I'm configured for Reorder Point Planning as follows:
MRP type V1, Reorder Point Planning with External Requirements
Planning Strategy 52
HB Max Stock Level
For the longer term forecast requirements I'm configured with:
Independent Requirement Type VSE, Planning without final assembly. This is creating non convertible planned order independent requirements.
The reorder point planning is executing perfectly, but how do I get the VSE planned order independent requirements to show up in long term capacity and inventory planning? What am I missing? Is it something with MRP type, am I missing an option in the long term planning setup?
This has been a tough issue and I would greatly appreciate any advice on this.
Thank you,
Wes
Edited by: weslaney on Jul 21, 2009 11:40 PM

HI
check the planning scenario in MS31 and the PIR assignment in MS31 also check the plant assignement.
Check In MD61 you have enter PIRs in simulation version and the same version is to assigned in planning scenario
Also check T code OPU5 for LTP setting for planned orders
Regards
Anupam Sharma
Edited by: anupam sharma on Sep 3, 2010 2:33 PM

Long-term planning: how can I reorganize "bulk" independent requirements ?

Hello,
Due to some circumstances I have dependent simulative requirements with no relation to any independent requirements.
I thought that with ms01 (Processing key NEUPL -Regenerative planning and Planning mode 3 - Delete and recreate planning) those independent requirements will
be deleted because the former independet requirements are no more existing.
But they remain existing. (in mfs0)
How can I reorganize "orphaned" independent requirements in long term planning.
Thanks for any help
Thomas

Thanks a lot for answer.
The subject of my original-question was
wrong. It should say "dependent" requirements
instead of "independent" requirements.
I solved the problem by deleting the
respective entries in MDSM-Table
But anyway, the usage of md74/75 was a
good recommandation, thanks very much.

Long Term Planning : Requirements from "Consumption based planning" missing

Hello,
I'm trying to use long term planning ( MSBT,MS01..) for simulation. In the scenario I've set up I want to have all actual requrements and orders as well as fixed orders.
The problem is that requirements(=forecast) for materials with consumption based planning ( MRP type =VV ) are not transferred from the operative planning. How can this be achieved ?
Best Regards
Bernt

Hi,
Hard to say... have you looked in the details of the VV MRP setting, your LTP scenario, or your copy transaction in case there is some parameter about this?
In case you are looking for information about this process, here is a good document with a detailed description of the Long-Term Planning Process in SAP (with detailed T-codes as well): http://expertplug.com/materials/training/long-term-planning-in-sap
You have a preview and a detailed description to see if it suits your needs.
Cheers
Matthieu

Long Term Planning-Planning File Entry

Hi Gurus/Friends
In the long term planning after PIR with inactive version and creating Scenario, assinging versions, Plants,....then
during Release+Save it is giving the Result of Planning File Entries
Logically the system has suppose to give the Number of Planning File Entries in Propotionate to the Specific Planning Scenario number and materials inside
But it is giving for all the Materials inside the Plant
Is there any settings to restrict the Planning File Entry creation w.r.t Planning scenario during Release+Save
other than the solutions through Transaction MS20,MS22 and MSAB
(Because during Release+save logically it has to call the MS22 t.code and do planning file entries for the materials in that scenario)
Awaiting for reply
thanks
K.Prabakaran

Hi,
Please Refer Below SAP help .
*Releasing a planning scenario*
You first have to release a planning scenario before you can plan it in the long-term planning run. When you release the planning scenario, the system creates planning file entries for all materials in all the plants allocated to the planning scenario. There is a separate planning file entry for this purpose. This guarantees that your operative planning is kept completely separate from your simulative planning. This long-term planning file contains all the materials that are also contained in the operative planning file. After the release, every change relevant to MRP triggers an entry in the planning file as in operative planning.
Pradeep
Edited by: Pradeep Kumar on May 9, 2008 4:22 PM

Excluding storage location from MRP run in Long Term Planning

Hi,friends,
In my scenario , i want to exclude storage location from MRP run in long term planning.When i set storage location MRP indicator "2" in SPRO and SLoc MRP indicator "1" MRP4 in material master, i can exclude the storage location after run MRP with MD01/MD02,and i can see the expected result in MD04.But in Long Term Planning scenario the storage location can not be excluded after run MRP with MS01/MS02,and the requirements list in MS04 include the stock in the storage location i want to exclude. i dont know if i miss something.Plz give me some advice.
Regards
Joey

Hi,
Refer the OSS Note 208017 - LTP: Long-term planning and storage locations
==========================================================================
Symptom
In long-term planning (Transactions MSBT / MS01 / MS02 / MS03), the MRP indicator of a storage location for a material is not taken into account (material master, view MRP 2 [up to and including Release 3.1I] or MRP 4 [as of Release 4.0A]).
The storage locations excluded by MRP or planned separately are also planned in the plant segment.
Additional key words
LTP, MM01, MM02, MM03, master data, MRP indicator, LGORT ...
Cause and prerequisites
The MRP indicator for a certain storage location of a material is only taken into account in operative planning (requirements planning, MRP).
The long-term planning occurs exclusively at plant level.
Solution
This is no error. The system works as intended.
The individual storage locations should not be distinguished in the long-term planning, in order to perform a comprehensive long-term planning.
This is important, for example, within the kanban processing where the storage locations with kanban MRP are excluded from the MRP, but in spite of that should be included in the long-term planning.
==========================================================================
Regards,
Siva

Extracting LTP (Long Term Planning) Data from SAP ECC to SAP BW

Hello all
Here is the task in hand. There is a standard report that Production Planners execute post their MRP/LTP runs. This report can be accessed through T-code "MCB)". The program in action is RMCB1200. I tried looking for any standard extractors but to no avail. I would be fine to know either or both of the following:
An extractor
All the primary tables involved ( I have found a few tables through the program but a list by some expert will help me understand that I have not missed anything significant)
Also, if anyone has done this before, how was your experience with the extraction in terms of extraction volume and performance.
Regards
Gajendra

After further digging, here is some information that I found out.
T-code
Program
BADI
MSEX
RMDMRPEXTRACT02
MD_SR_LIST_EXTRACT
This could possibly provide the data required. The program can be scheduled and the output can be managed by SPRO settings for Extraction Mode. I am running tests to confirm if it provides me the correct information and matches with MCB) output.
Here are some tables, just for reference:
LTP Tables: PLSC, PBHI, PLPT, MDTP, PLPR, PLPB
MRP Records:
MDKP
MRP Document Header Data
MDTB
MRP Table Structure (no data)
PLSC
Planning Scenario (Long-term Planning)
MDFD
MRP Firming Dates
MDVM
Planning File Entries
S094
LIS -- Stock/Requirements Analysis

Long Term Planning get problem!

Similar Messages

Maybe you are looking for