Long term Planning in SAP

Hi Gurus,
I am new to SAP,this my 1st query in SDN.
I have been given sales figures of last 5 years of particular organization and i have been told to create a long term planning report in SAP please tell me the detailed methodology of create a long plan for the next 6 months in SAP.
Regards
Krish

Dear Krish,
LTP is a planning tool,where simulated planned orders's are obtained for an inactive plan.
It will be more helpful from production perspective.
To carry out an annual planning or a rolling quarterly planning run you require information on the future stock and requirements
situation. This means you need to know how sales and operations planning influence resources. That is, whether the results
of sales planning can actually be produced with capacity on hand. If such information is available it is possible to decide at an
early date whether extra work centers will be required to cope with bottlenecks, or whether additional machinery will have to
be purchased to reach the sales target.
Steps for LTP:
1.A plannig scenario has to be created for a plant in T code MS31 & for the same Planning scenario
configuration settings has to be made in OPU5 for the planned orders for LTP.
2.Requirements has to be given in MD61 in an inactive version and also after giving the requirements
kindly remove the tick mark against version- active check box.
3.Assign this plan to the planning scenario in MS32,release it and ensure the planning file entries are
entered or created,the same can be checked using MS21.
4.After taking LTP simulation run in MS02(individual material) or MS01 you can see the simulated
planned orders obtained in MS04 T code.
5.These Simulated planned orders can't be converted into production orders or it cant be used for any
business confirmation purpose.
6. For capacity planning analysis,use T Code CM38,
Before that Ensure for all the work centers in CR03 which are used for operation under capacity header
you have included the check box for Long term planning,otherwise in CM38 you can't see any capacity requirements data.
7.Before executing CM38,ensure under settings---> general you are giving the period settings properly.
8.Use T Code KSPP to transfer the planned activity requirements for production.
Revert back incase of any more clarifications required.
Regards
Mangalraj.S

Similar Messages

I can't see planned order in Long Term Planning Stock/requirements list.

Hi
I am trying to use Long Term Planning in SAP.
I created scenario dates from 01.03.2011 to 03.09.2011. Between those dates i entered planned independent requirements as 300.
When i went to Long Term Planning Stock/requirements list, i can see all planned independent requirements but i run Multilevel single-item planning and then when i went to Long Term Planning Stock/requirements list again, i couldnt see planned order for planned independent requirements.
So what is the problem? Can anyone help me please?
Thank you.

HI
check the planning scenario in MS31 and the PIR assignment in MS31 also check the plant assignement.
Check In MD61 you have enter PIRs in simulation version and the same version is to assigned in planning scenario
Also check T code OPU5 for LTP setting for planned orders
Regards
Anupam Sharma
Edited by: anupam sharma on Sep 3, 2010 2:33 PM

Long term Planning - capacity issue

Does any one have a way of running Long Term Planning in SAP.
When checking CM38 for production volumes, the start dates of
the planned orders always fall into the previous month from the
forecast (the monthly forecast is always placed on the first day
of the period and due to lead time scheduling the planned orders
to satisfy that forecast fall into the previous month). If i check the
capacity it show in same month for different month requirment.( it is clubing the requirment)
Though capacity scene was created from June to August , system shows loading from May month.
Month wise loading and availability are shown clubbed in capacity planning sheet.
Thanks in advanc....

Mukesh,
To change the forecast from occuring at start of period ( month) you can always select the Schedule line Tab in MD61,MD62. then select period indicator as Day format as shown below
Per. Ind          Date              Qty
D     17.05.2010     30
D     15.06.2010     40
D     15.07.2010     50
System will then plan PIR (forcast) based on dates assigned by user instead of being placed on the first day
of the period. This will prevent forcast to fall into the previous month. Also it will resolve the capacity issue you are facing.
If you have more questions please come back.
thanks,
Ram

Long Term Planning : Requirements from "Consumption based planning" missing

Hello,
I'm trying to use long term planning ( MSBT,MS01..) for simulation. In the scenario I've set up I want to have all actual requrements and orders as well as fixed orders.
The problem is that requirements(=forecast) for materials with consumption based planning ( MRP type =VV ) are not transferred from the operative planning. How can this be achieved ?
Best Regards
Bernt

Hi,
Hard to say... have you looked in the details of the VV MRP setting, your LTP scenario, or your copy transaction in case there is some parameter about this?
In case you are looking for information about this process, here is a good document with a detailed description of the Long-Term Planning Process in SAP (with detailed T-codes as well): http://expertplug.com/materials/training/long-term-planning-in-sap
You have a preview and a detailed description to see if it suits your needs.
Cheers
Matthieu

Long term planning in ECC for materials planned in SAP APO

Hi SAP PP and APO Experts,
I would like to know whether it is possible to plan a material in SAP ECC with Long Term Planning to create Simulative Planned Orders in ECC, when the MRP Type for the material is set to X0 (Planning in SAP APO).
Warm regards,
Prem

Hi Dhaivakumar,
Appreciate your prompt response.
My business is MTS. I have made all settings for LTP planning for the material. (M|RP Type is set to X0-Planning in APO). When I execute the transaction MS02, I get the error message "Material 5200000013 J310 is not planned automatically. Message no. 61008". The details of the error message is:
The material 5200000013 in plant J310 or in MRP area is not included in automatic MRP because
either the MRP data for plant J310 or MRP area has not been created
or an MRP type has been entered for the material in plant J310 or MRP area that does not allow automatic MRP.
Warm regards,
Prem

Extracting LTP (Long Term Planning) Data from SAP ECC to SAP BW

Hello all
Here is the task in hand. There is a standard report that Production Planners execute post their MRP/LTP runs. This report can be accessed through T-code "MCB)". The program in action is RMCB1200. I tried looking for any standard extractors but to no avail. I would be fine to know either or both of the following:
An extractor
All the primary tables involved ( I have found a few tables through the program but a list by some expert will help me understand that I have not missed anything significant)
Also, if anyone has done this before, how was your experience with the extraction in terms of extraction volume and performance.
Regards
Gajendra

After further digging, here is some information that I found out.
T-code
Program
BADI
MSEX
RMDMRPEXTRACT02
MD_SR_LIST_EXTRACT
This could possibly provide the data required. The program can be scheduled and the output can be managed by SPRO settings for Extraction Mode. I am running tests to confirm if it provides me the correct information and matches with MCB) output.
Here are some tables, just for reference:
LTP Tables: PLSC, PBHI, PLPT, MDTP, PLPR, PLPB
MRP Records:
MDKP
MRP Document Header Data
MDTB
MRP Table Structure (no data)
PLSC
Planning Scenario (Long-term Planning)
MDFD
MRP Firming Dates
MDVM
Planning File Entries
S094
LIS -- Stock/Requirements Analysis

Sap mm md04 and ms04 stock requirement and long term planning issue

Hi guru's,
i have one issue regarding MD04 and MS04. in MD04 3 storage locations were showing. in that the stock in 2 storage locations was excluded due to no long term plan.
now if we see in ms04, these 2 storage locations are not appearing. now my logistics manager wants to maintain the long term planning for these two also.
in md04,,, 3 storage locations available ..same like ms04 should follow
provide the solution as soon as possible
Thanks & Regards
Prasad.

Mukesh,
To change the forecast from occuring at start of period ( month) you can always select the Schedule line Tab in MD61,MD62. then select period indicator as Day format as shown below
Per. Ind          Date              Qty
D     17.05.2010     30
D     15.06.2010     40
D     15.07.2010     50
System will then plan PIR (forcast) based on dates assigned by user instead of being placed on the first day
of the period. This will prevent forcast to fall into the previous month. Also it will resolve the capacity issue you are facing.
If you have more questions please come back.
thanks,
Ram

Long Term Planning-Planning File Entry

Hi Gurus/Friends
In the long term planning after PIR with inactive version and creating Scenario, assinging versions, Plants,....then
during Release+Save it is giving the Result of Planning File Entries
Logically the system has suppose to give the Number of Planning File Entries in Propotionate to the Specific Planning Scenario number and materials inside
But it is giving for all the Materials inside the Plant
Is there any settings to restrict the Planning File Entry creation w.r.t Planning scenario during Release+Save
other than the solutions through Transaction MS20,MS22 and MSAB
(Because during Release+save logically it has to call the MS22 t.code and do planning file entries for the materials in that scenario)
Awaiting for reply
thanks
K.Prabakaran

Hi,
Please Refer Below SAP help .
*Releasing a planning scenario*
You first have to release a planning scenario before you can plan it in the long-term planning run. When you release the planning scenario, the system creates planning file entries for all materials in all the plants allocated to the planning scenario. There is a separate planning file entry for this purpose. This guarantees that your operative planning is kept completely separate from your simulative planning. This long-term planning file contains all the materials that are also contained in the operative planning file. After the release, every change relevant to MRP triggers an entry in the planning file as in operative planning.
Pradeep
Edited by: Pradeep Kumar on May 9, 2008 4:22 PM

How to consider the Purchase Orders in Long Term Planning

Hi All,
I wanted to include the Purchase Orders of Finished Material in Long Term Planning.
I have selected the check box "Long-term planning: include firmed issues and receipts" in the Planning Scenario but after LTP run system is not considering the Purchase Orders of Finished Materials for Planning.
Regards,
Shailendra
Edited by: Shailendra Hadkar on Apr 5, 2010 12:41 PM

Dear,
Could you please explain usage of purchase orders for Finished product?
Regards,
SAP CONS

Implementing Long-Term Planning

Dear Guys,
Is that possible to implement Long-Term Planning (LTP) in SAP when there is no SOP module in the system. Would you please inform me the basic requirements or basic setup to implement LTP in SAP system.
Thank you in advance!

Hi Payam,
This is always recommended to implement LTP if you have long lead times for some procured parts, bottle necks in capacities for work centers and most important to plan about budget required for the production of those parts.
The above things you cannot check with STP/MTP and perform changes after the STP/MTP runs. But this you can do with LTP with diffrent scenarios and compare it till you satisfy.
You can do the precosting of the parts and check what would be your future costing and plant budget.
You can transfer the requireemnst of the critical parts to vendors well in advance after LTP run and before running the actual planning for the entire year, so the vendors will be well prepared to supply you the parts.
You can also checks the capacities required for the production before the STP run.
If this is OK then please close this thread.
Regards
TAJUDIN

Re: Long term Planning

Dear All,
I am trying to do Long term Planning. In my case I am not using SOP. Demand is entered into SAP through PIR (i.e. PIR).
I want to see how much load is there on all the resources available.
Please advice me how to proceed in this direction.
Regards,
Vivek Sharma

Dear Vivek,
Check with these steps,
1.A plannig scenario has to be created for a plant in T code MS31 & for the same Planning scenario
configuration settings has to be made in OPU5 for the planned orders for LTP.
2.Requirements has to be given in MD61 in an inactive version and also after giving the requirements
kindly remove the tick mark against version- active check box.
3.Assign this plan to the planning scenario in MS32,release it and ensure the planning file entries are
entered or created,the same can be checked using MS21.
4.After taking LTP simulation run in MS02(individual material) or MS01 you can see the simulated
planned orders obtained in MS04 T code.
5.These Simulated planned orders can't be converted into production orders or it cant be used for any
business confirmation purpose.
6. For capacity planning analysis,use T Code CM38,
Before that Ensure for all the work centers in CR03 which are used for operation under capacity header
you have included the check box for Long term planning,otherwise in CM38 you can't see any capacity
requirements data.
7.Before executing CM38,ensure under settings---> general you are giving the period settings properly.
Revert back incase of any more clarifications required.
Regards
Mangalraj.S

Datasources for Long term Planning

Hi Guys,
Our client is planning to implement Production Planning - Long term planning for next release. I did enough searching to find out different SAP delivered Data sources and different tables that are involved in LTP but was unsuccesful. Can anybody guide me by providing the list of datasources and tables.
Thank you,
Regards,
Vamsi.

Hi Vamsi,
This blog will give all list of all Infocubes, Infosources and Datasources which are relted to Production Planning.
http://help.sap.com/saphelp_nw70/helpdata/EN/12/c770376ec62c7ee10000009b38f8cf/frameset.htm
Hope it helps you
Nagaraju.V

Capacity planning Long-term planning CM38

Hi,
I am using Long-term planning scenario. I have created 12 PIRs for 12 months from January 2010 to December 2010. I executed MRP in MS01 in Lead scheduling Mode.
There are 12 planned orders created for the 12 PIRs for the months Jan to Dec-2010. When I see the planned orders in MS04 the satrt and finish date for the planned orders are showing in respective months beginning.
But when I check capacity in transaction CM38, all the 12 planned order for Jan to December months are displayed in the month of January itself instead of the respective months from Jan to December and the work center is overloaded 199%.
Please suggest to solve this issue.
thanks and regards
Murugesan

Hi,
In customization for Capacity Planning you can define you own selection profiles to work with. You may specify further selection criteria in selection profile and enhance query speed from database. Slection profiles are assigned to overall profiles and overall profiles can be called by CM07 transaction. CM38 is also working over an overall profile which you may learn from SAP help. This can also be changed.
Also check OPC5 to limit max data for selection which might be useful.
Regards.

Report on Long term Planning

Hi Gurus,
Is there a std SAP report in PP which gives out the demand of a material based on long term planning and also informs the actual consumption of the material other than MD62 , MD73, by which we can have a variance of planned demand and actual consumption displayed.
Edited by: Raj Muthu on Feb 1, 2008 11:14 PM

Dear,
You can use MD67 to see the demand in excel or on the screen...consumption i donot think you will get so easily...

Long term Planning -PP

Hi Gurus,
Can any one explaine me the config step by step of creating long term planning. I am using APO DP PIR in SAP ECC and trying to generate Long term planning.
It will be really great if ayone can help me in step-by step.
Thanks & Regards,
kumar

HI
These are the main steps for LTP:
1.A plannig scenario has to be created for a plant in T code MS31 & for the same Planning scenario
configuration settings has to be made in OPU5 for the planned orders for LTP.
2.Requirements has to be given in MD61 in an inactive version and also after giving the requirements
kindly remove the tick mark against version- active check box.
3.Assign this plan to the planning scenario in MS32,release it and ensure the planning file entries are
entered or created,the same can be checked using MS21.
4.After taking LTP simulation run in MS02(individual material) or MS01 you can see the simulated
planned orders obtained in MS04 T code.
5.These Simulated planned orders can't be converted into production orders or it cant be used for any
business confirmation purpose.
6 For capacity planning analysis check T code CM38
Regards
Anupam Sharma

Long term Planning in SAP

Similar Messages

Maybe you are looking for