LONG TERM PLANNING-pLANNING SCENARIO

Hello friends,
                   I am using long term planning and creating a long term planning scenario.
Where the version created of PIR is allocated to the planning scenario?how? give me the steps..
regards,
Ajay

In MS32
folow the menu path
Edit --> Pl ind requirement
in the pop up  screen, enter the varsion you have created for LTP, leave blank vsrion to be replaced... and click on confirm..
it will asign the PIR version to LTP.

Similar Messages

  • Long Term manpower Planning

    Hi,
    Is there any new tool or sub module introduced in the next release (ECC 6.0) of HCM on Long Term Manpower Planning (between 3-5 years) for planning the manpower composition? We are on 4.6C & I have checked the Personnel Cost Planning & Quota Planning functionalities in SAP HR. These don't suit our purpose.
    Thanks & regards,
    Sameer

    Hi ,
    1.In the Longterm planning check till what duration your planning scenario is valid.
    2. also if you have maintained the planned independent requirement check if the values are available for the future periods.
    You can check this in primarily .
    reg
    DSK

  • Long Term Manpower Plan

    Dear,
    I would appreciate it if some one can help me in finding the best source or information about the Long Term Manpower Plan in SAP HCM, I don’t know if it is in the new releases of compensation management or personal development / career and succession planning?
    We are in SAP 4.6 c and Portal 6.0 with ESS and MSS, planning to upgrade soon,
    Regards

    Dear,
    I would appreciate it if some one can help me in finding the best source or information about the Long Term Manpower Plan in SAP HCM, I don’t know if it is in the new releases of compensation management or personal development / career and succession planning?
    We are in SAP 4.6 c and Portal 6.0 with ESS and MSS, planning to upgrade soon,
    Regards

  • Long term, interactive planning

    Hi,
    I have having problem in long term planning
    In MS annual planning, i can see that till 2008 planned order has been created.Ater firming and run MD43, i can see only few months not all month for next year.After i save this and go to MD15 i can’t see required planed orders for next year.
    Please let me know where exactly is the problem.I request everyone to give me some solution as it is ver urgent.
    regards
    satyajit kumar

    Hi Geeta,
    I had checked the period that time only. It's ok. I think problem is some where else. Anyway thnx for your response.Plz get back to me if you find anyhting else on this issue.
    Regards
    Satyajit Kumar

  • Reg Long term disability

    My friends in my scenario employee who goes for long term disability
    during his first period(three month) he should be deducted 75% of pay
    during his second period(three month) he should be deducted 50% of pay
    remaining period 10% of pay.
    For me for all the month deduction of 75% only happening. Remaining rules are not working.
    I configured everything related to that. Still it s not working out.
    Please guide me.

    In IMG USA -> Abscences ->
    ->Describe Absence Valuation Rules
                     Here  i gave the text for the rule.
    ->Assign absences to valuation classes
                     In this I assigned the rule no for the PSG and abscenc type 202
    Short/Long-Term Disability (STD/LTD) Plans
        Establish and define short/long-term disability plans
                    In this i Created the plan intervals as I mentioned earlier
    Prepare payroll for processing pay related to STD/LTD plans
    ->Check split payment valuation rules for STD/LTD plans
                   Here for those rule which i created - assigned  the wage type M864.
    ->Check absence breakdown for STD/LTD plans
                   I linked all the rules.

  • Long Term Planning-Planning File Entry

    Hi Gurus/Friends
    In the long term planning after PIR with inactive version and creating Scenario, assinging versions, Plants,....then
    during Release+Save it is giving the Result of Planning File Entries
    Logically the system has suppose to give the Number of Planning File Entries in Propotionate to the Specific Planning Scenario number and materials inside
    But it is giving for all the Materials inside the Plant
    Is there any settings to restrict the Planning File Entry creation w.r.t Planning scenario during Release+Save
    other than the solutions through Transaction MS20,MS22 and MSAB
    (Because during Release+save logically it has to call the MS22 t.code  and do planning file entries for the materials in that scenario)
    Awaiting for reply
    thanks
    K.Prabakaran

    Hi,
    Please Refer Below SAP help .
    *Releasing a planning scenario*
    You first have to release a planning scenario before you can plan it in the long-term planning run. When you release the planning scenario, the system creates planning file entries for all materials in all the plants allocated to the planning scenario. There is a separate planning file entry for this purpose. This guarantees that your operative planning is kept completely separate from your simulative planning. This long-term planning file contains all the materials that are also contained in the operative planning file. After the release, every change relevant to MRP triggers an entry in the planning file as in operative planning.
    Pradeep
    Edited by: Pradeep Kumar on May 9, 2008 4:22 PM

  • Excluding storage location from MRP run in Long Term Planning

    Hi,friends,
         In my scenario , i want to exclude storage location from MRP run in long term planning.When i set storage location MRP indicator "2" in SPRO and SLoc MRP indicator "1" MRP4 in material master, i can exclude the storage location after run MRP with MD01/MD02,and i can see the expected result in MD04.But in Long Term Planning scenario the storage location can not be excluded after run MRP with MS01/MS02,and the requirements list in MS04 include the stock in the storage location i want to exclude. i dont know if i miss something.Plz give me some advice.
    Regards
    Joey

    Hi,
    Refer the OSS Note 208017 - LTP: Long-term planning and storage locations
    ==========================================================================
    Symptom
    In long-term planning (Transactions MSBT / MS01 / MS02 / MS03), the MRP indicator of a storage location for a material is not taken into account (material master, view MRP 2 [up to and including Release 3.1I] or MRP 4 [as of Release 4.0A]).
    The storage locations excluded by MRP or planned separately are also planned in the plant segment.
    Additional key words
    LTP, MM01, MM02, MM03, master data, MRP indicator, LGORT ...
    Cause and prerequisites
    The MRP indicator for a certain storage location of a material is only taken into account in operative planning (requirements planning, MRP).
    The long-term planning occurs exclusively at plant level.
    Solution
    This is no error. The system works as intended.
    The individual storage locations should not be distinguished in the long-term planning, in order to perform a comprehensive long-term planning.
    This is important, for example, within the kanban processing where the storage locations with kanban MRP are excluded from the MRP, but in spite of that should be included in the long-term planning.
    ==========================================================================
    Regards,
    Siva

  • Extracting LTP (Long Term Planning) Data from SAP ECC to SAP BW

    Hello all
    Here is the task in hand. There is a standard report that Production Planners execute post their MRP/LTP runs. This report can be accessed through T-code "MCB)". The program in action is RMCB1200. I tried looking for any standard extractors but to no avail. I would be fine to know either or both of the following:
    An extractor
    All the primary tables involved ( I have found a few tables through the program but a list by some expert will help me understand that I have not missed anything significant)
    Also, if anyone has done this before, how was your experience with the extraction in terms of extraction volume and performance.
    Regards
    Gajendra

    After further digging, here is some information that I found out.
    T-code
    Program
    BADI
    MSEX
    RMDMRPEXTRACT02
    MD_SR_LIST_EXTRACT
    This could possibly provide the data required. The program can be scheduled and the output can be managed by SPRO settings for Extraction Mode. I am running tests to confirm if it provides me the correct information and matches with MCB) output.
    Here are some tables, just for reference:
    LTP Tables: PLSC, PBHI, PLPT, MDTP, PLPR, PLPB
    MRP Records:
    MDKP
    MRP Document Header Data
    MDTB
    MRP Table Structure (no data)
    PLSC
    Planning Scenario (Long-term Planning)
    MDFD
    MRP Firming Dates
    MDVM
    Planning File Entries
    S094
    LIS -- Stock/Requirements Analysis

  • How to consider the Purchase Orders in Long Term Planning

    Hi All,
    I wanted to include the Purchase Orders of Finished Material in Long Term Planning.
    I have selected the check box "Long-term planning: include firmed issues and receipts" in the Planning Scenario  but after LTP run system is not considering the Purchase Orders of Finished Materials for Planning.
    Regards,
    Shailendra
    Edited by: Shailendra Hadkar on Apr 5, 2010 12:41 PM

    Dear,
    Could you please explain usage of purchase orders for Finished product?
    Regards,
    SAP CONS

  • Implementing Long-Term Planning

    Dear Guys,
    Is that possible to implement Long-Term Planning (LTP) in SAP when there is no SOP module in the system. Would you please inform me the basic requirements or basic setup to implement LTP in SAP system.
    Thank you in advance!

    Hi Payam,
    This is always recommended to implement LTP if you have long lead times for some procured parts, bottle necks in capacities for work centers and most important to plan about budget required for the production of those parts.
    The above things you cannot check with STP/MTP and perform changes after the STP/MTP runs. But this you can do with LTP with diffrent scenarios and compare it till you satisfy.
    You can do the precosting of the parts and check what would be your future costing and plant budget.
    You can transfer the requireemnst of the critical parts to vendors well in advance after LTP run and before running the actual planning for the entire year, so the vendors will be well prepared to supply you the parts.
    You can also checks the capacities required for the production before the STP run.
    If this is OK then please close this thread.
    Regards
    TAJUDIN

  • Long-Term Planning (PP-MP-LTP)

    Do you know BI content for Long-Term Planning (PP-MP-LTP)?

    Not that I know.
    Often business people actually mean SOP (BC: 0SOP_PLANNING) when talking about long-term planning. I don't see any point in reporting LTP that is more like alternative MRP scenarios. It is operational and different scenarios easily get confusing in reporting.
    BR,Tuomas

  • I can't see planned order in Long Term Planning Stock/requirements list.

    Hi
    I am trying to use Long Term Planning in SAP.
    I created scenario dates from 01.03.2011 to 03.09.2011. Between those dates i entered planned independent requirements as 300.
    When i went to Long Term Planning Stock/requirements list, i can see all planned independent requirements but i run Multilevel single-item planning and then when i went to  Long Term Planning Stock/requirements list again, i couldnt see planned order for planned independent requirements.
    So what is the problem? Can anyone help me please?
    Thank you.

    HI
    check the planning scenario in MS31 and the PIR assignment in MS31 also check the plant assignement.
    Check In MD61 you have enter PIRs in simulation version and the same version is to assigned in planning scenario
    Also check T code OPU5 for LTP setting for planned orders
    Regards
    Anupam Sharma
    Edited by: anupam sharma on Sep 3, 2010 2:33 PM

  • Re: Long term Planning

    Dear All,
    I am trying to do Long term Planning. In my case I am not using SOP. Demand is entered into SAP through PIR (i.e. PIR).
    I want to see how much load is there on all the resources available.
    Please advice me how to proceed in this direction.
    Regards,
    Vivek Sharma

    Dear Vivek,
    Check with these steps,
    1.A plannig scenario has to be created for a plant in T code MS31 & for the same Planning scenario
    configuration settings has to be made in OPU5 for the planned orders for LTP.
    2.Requirements has to be given in MD61 in an inactive version and also after giving the requirements
    kindly remove the tick mark against version- active check box.
    3.Assign this plan to the planning scenario in MS32,release it and ensure the planning file entries are
    entered or created,the same can be checked using MS21.
    4.After taking LTP simulation run in MS02(individual material) or MS01 you can see the simulated
    planned orders obtained in MS04 T code.
    5.These Simulated planned orders can't be converted into production orders or it cant be used for any
    business confirmation purpose.
    6. For capacity planning analysis,use T Code CM38,
    Before that Ensure for all the work centers in CR03 which are used for operation under capacity header
    you have included the check box for Long term planning,otherwise in CM38 you can't see any capacity
    requirements data.
    7.Before executing CM38,ensure under settings---> general you are giving the period settings properly.
    Revert back incase of any more clarifications required.
    Regards
    Mangalraj.S

  • Short, medium and long term planning in SNP

    Hi,
          can somebody explain me what Short, medium and long term planning mean in SNP?
    Lets, say I have this scenario:
    If I have a product with SNP horizon of 35 days, which means that the product is planned in SNP only after 35 days from today.  Only PPDs deals with orders in these 35 days.
    I have a 3 planning books
    short term with 30 days from today
    medium term with 7 months from today and
    long term with 2 years from today.
    When I say short, medium and long term planning in SNP what exactly happens in these ?? What do users usually do in these books?
    SNP horizon is 35 days and the short term book is 30 days long, in which SNP does nothing. What's the use of this book?
    Thanks.

    When I say short, medium and long term planning in SNP what exactly happens in these ??
    Nothing much from a technical stand point.
    What do users usually do in these books?
    Check the Time Bucket Profile for the different books. The short Term Book will be in days, the mid term in weeks and the long term in months/quarters etc. The different books allows users to see the keyfigures in different time-based aggregate level.
    But if Heuristic is executed then behaviour will be different. Remember SNP Location Heuristic run uses the bucket of the data view to compute the Net Requirement and then try creating Receipts in each bucket within the time horizon of the data view using suitable master data. So if you run Location Heuristic in the short Term (daily) view then you will have many receipts one per day most likely. If you run in mid-term Weekly view then there are less number of receipts one receipt per week till 7 months. likewise for the long term view.
    SNP horizon is 35 days and the short term book is 30 days long, in which SNP does nothing. What's the use of this book?
    Maybe just to see the data. Location Heuristic run will not generate any new receipt.
    Thanks,
    Somnath

  • Short term planning & long term Planning

    Hi PP Guru's
    !  . I have scenario like this I am having many trading Plant and the requirements are collected and Sales person preparing VA31
    Scheduling agreement for 1 week ( Short term ) also for 10 weeks ( long term ). In trading plant ( planning  / delivery plant ) there
    is no master data other than material master is Maintained in SAP system 
    2  . I am having Production Plant  and  need  to address this requirement May be through SPk 40 .
       My question is How the requirement should I transfer whether i need to manually create manually PIR and copy into Production
       Plant or is there any other way to transfer the requirements from SA ( VA31 )
    3. I want to adopt planniing strategy 52 - Planning without Final assembly because my Planning of certain SFG Procured externally
       should not trigger as per my FG requirements but as per my rolling Plan for 10 weeks for which I am PR having from MRP for
       Long term procurement material which is having lead time say 2 Months I am converting PR into PO using ME59N transaction with
      weekly Lot size .
    4.  For Short term Procurement material I have lot size as TB which is having less lead time say 2 - 5 days max.
    Could you please tell me using this strategy 52 how my PIR will consume and  Reduce and in which stage . If i am doing PGI using
    641 Movement type from Production Plant and PGR using 101 movement type .
    5. For my Procurement for Long term with A class material how can I reduce my inventory may be space constraint and Cost
       Constraint how can I receive this material for my Production.
    Marks will be awarded with Max for right answer
    Regards,
    jaya

    Hi,
    Hope you know the rules of the forum too many questions in single thread is not permitted.
    kindly break them to get proper reply.

Maybe you are looking for