Long Term Planning: use of active PIR's only... Is it possible?

Hello everybody,
Is it possible to make the LTP only take care of active PIR's and not the inactive ones?
I explain:
In MD04, I don't see any indep.requirements for a material.
In MS04, I can see some indep.requirements for this same material. (But in fact, they are inactives!)
Obviously, the LTP is taking care of these inactive indep.requirements...
I would like the LTP to not take care about the inactive indep.requirements. Is it possible?
Thanks in advance for your help.
Regards,
Rudy

OK, thank you Mario, but in fact, the PIR's that are relevant for LTP can be active or inactive.
Example:
PIR's:
(1) Material-A   version ZT (active)
--> visible in MS04 and MD04, and relevant for LTP.
(2) Material-B   version ZT (inactive)
--> only visible in MS04, but is relevant for LTP.
My question is: is it possible to make example (2) not relevant for LTP? (no matter if it is visible or not in MS04).
Thanks!
Regards,
Rudy

Similar Messages

  • Long term planning,mid point scheduling,finite scheduling

    Dear Sir,
    Please explain the Long term planning,mid point scheduling and finite scheduling in simple words
    thnx.

    Hi,
    LTP: Long term planning used to simulate your future production plan. Based on your future production plan, you can check by simulation, loading the products requirements in the inactive planning version and defining the inactive planning version in the scenario and you can execute the MRP run. Then the system will create the capacity requirements and you can see the overloads. Based on this simulation run, you can include any new work centres and increase the manpower or increase the shifts.
    Finite Scheduling: This will consider the real details, like the no of work centres and working hours per day and working days in a year and considering the existing loads. This is called finite scheduling. R/3 does infinite scheduling. If the capacity not exist also you can release the production orders.
    Regards,
    V. Suresh

  • Use Reorder Point Planning and see VSE Requirements in Long Term Planning

    Hello,
    I would like to use reorder point planning short term and something similar to MRP planning long term. I am trying to drive actual production off of consumption and plan long term for capacity, inventory and BOM components.  Our plan is to delete the near term forecast and leave the long term forecast in to show requirements for LTP.
    I'm configured for Reorder Point Planning as follows:
    MRP type V1, Reorder Point Planning with External Requirements
    Planning Strategy 52
    HB Max Stock Level
    For the longer term forecast requirements I'm configured with:
    Independent Requirement Type VSE, Planning without final assembly.  This is creating non convertible planned order independent requirements.
    The reorder point planning is executing perfectly, but how do I get the VSE planned order independent requirements to show up in long term capacity and inventory planning? What am I missing?  Is it something with MRP type, am I missing an option in the long term planning setup?
    This has been a tough issue and I would greatly appreciate any advice on this.
    Thank you,
    Wes
    Edited by: weslaney on Jul 21, 2009 11:40 PM

    HI
    check the planning scenario in MS31 and the PIR assignment in MS31 also check the plant assignement.
    Check In MD61 you have enter PIRs in simulation version and the same version is to assigned in planning scenario
    Also check T code OPU5 for LTP setting for planned orders
    Regards
    Anupam Sharma
    Edited by: anupam sharma on Sep 3, 2010 2:33 PM

  • Re: Long term Planning

    Dear All,
    I am trying to do Long term Planning. In my case I am not using SOP. Demand is entered into SAP through PIR (i.e. PIR).
    I want to see how much load is there on all the resources available.
    Please advice me how to proceed in this direction.
    Regards,
    Vivek Sharma

    Dear Vivek,
    Check with these steps,
    1.A plannig scenario has to be created for a plant in T code MS31 & for the same Planning scenario
    configuration settings has to be made in OPU5 for the planned orders for LTP.
    2.Requirements has to be given in MD61 in an inactive version and also after giving the requirements
    kindly remove the tick mark against version- active check box.
    3.Assign this plan to the planning scenario in MS32,release it and ensure the planning file entries are
    entered or created,the same can be checked using MS21.
    4.After taking LTP simulation run in MS02(individual material) or MS01 you can see the simulated
    planned orders obtained in MS04 T code.
    5.These Simulated planned orders can't be converted into production orders or it cant be used for any
    business confirmation purpose.
    6. For capacity planning analysis,use T Code CM38,
    Before that Ensure for all the work centers in CR03 which are used for operation under capacity header
    you have included the check box for Long term planning,otherwise in CM38 you can't see any capacity
    requirements data.
    7.Before executing CM38,ensure under settings---> general you are giving the period settings properly.
    Revert back incase of any more clarifications required.
    Regards
    Mangalraj.S

  • Long term Planning -PP

    Hi Gurus,
                  Can any one explaine me the config step by step of creating long term planning. I am using APO DP PIR in SAP ECC and trying to generate Long term planning.
    It will be really great if ayone can help me in step-by step.
    Thanks & Regards,
    kumar

    HI
    These are the main steps for LTP:
    1.A plannig scenario has to be created for a plant in T code MS31 & for the same Planning scenario
    configuration settings has to be made in OPU5 for the planned orders for LTP.
    2.Requirements has to be given in MD61 in an inactive version and also after giving the requirements
    kindly remove the tick mark against version- active check box.
    3.Assign this plan to the planning scenario in MS32,release it and ensure the planning file entries are
    entered or created,the same can be checked using MS21.
    4.After taking LTP simulation run in MS02(individual material) or MS01 you can see the simulated
    planned orders obtained in MS04 T code.
    5.These Simulated planned orders can't be converted into production orders or it cant be used for any
    business confirmation purpose.
    6 For capacity planning analysis check T code CM38
    Regards
    Anupam Sharma

  • Long term planning analysis

    Hi,
    what's long term planning analysis and how to use the blw tcodes.. in this tcode its asking for planning scenerio, how to create it?? pls explain the usages of these t codes?? is it really used in user level??
    MCEA
    MCEB
    MCEC

    Dear,
    Basically LTP is simulative MRP to simulate and see all the results like production capacity plan/ raw material plan/ profit margin. here we are using the same master data like material master, recipe, BOM etc.
    In MS31 - you create a LTP version where you can mention the PIR version where you enter the planning data in MD61.
    Release this version and maintain the planning data like qty per period in MD61 with the version mentioned in MS31, make sure that the version is not active so that LTP consider this inactive qty data.
    Run MS01/MS02/MS03 etc to run simulative MRP.
    Results can be seen in MS04/MS05.
    Inn MSF0 you can see the capacity requirement and adjust the qty to se that 100% capacity is utilized.
    We can see the raw material requirement in Pur info system in MCEC/MCEA/MCEB/MCB&/MCB)
    Also refer my reply from this link also,
    Re: LTP - S012 Tables
    Hope clear to you.
    Regards,
    R.Brahmankar

  • I can't see planned order in Long Term Planning Stock/requirements list.

    Hi
    I am trying to use Long Term Planning in SAP.
    I created scenario dates from 01.03.2011 to 03.09.2011. Between those dates i entered planned independent requirements as 300.
    When i went to Long Term Planning Stock/requirements list, i can see all planned independent requirements but i run Multilevel single-item planning and then when i went to  Long Term Planning Stock/requirements list again, i couldnt see planned order for planned independent requirements.
    So what is the problem? Can anyone help me please?
    Thank you.

    HI
    check the planning scenario in MS31 and the PIR assignment in MS31 also check the plant assignement.
    Check In MD61 you have enter PIRs in simulation version and the same version is to assigned in planning scenario
    Also check T code OPU5 for LTP setting for planned orders
    Regards
    Anupam Sharma
    Edited by: anupam sharma on Sep 3, 2010 2:33 PM

  • Capacity planning Long-term planning CM38

    Hi,
    I am using Long-term planning scenario. I have created 12 PIRs for 12 months from January 2010 to December 2010. I executed MRP in MS01 in Lead scheduling Mode.
    There are 12 planned orders created for the 12 PIRs for the months Jan to Dec-2010. When I see the planned orders in MS04 the satrt and finish date for the planned orders are showing in respective months beginning.
    But when I check capacity in transaction CM38, all the 12 planned order for Jan to December months are displayed in the month of  January itself instead of the respective months from Jan to December and the work center is overloaded 199%.
    Please suggest to solve this issue.
    thanks and regards
    Murugesan

    Hi,
    In customization for Capacity Planning you can define you own selection profiles to work with. You may specify further selection criteria in selection profile and enhance query speed from database. Slection profiles are assigned to overall profiles and overall profiles can be called by CM07 transaction. CM38 is also working over an overall profile which you may learn from SAP help. This can also be changed.
    Also check OPC5 to limit max data for selection which might be useful.
    Regards.

  • Query on Long Term Planning (MS31)

    During the creation of long term planning the following steps i followed before i am stuck at one point.
    1)T code MS31
    2)Planning Scenarion and detail
    3)Long term Planning Radio Button selection
    4)Planning period +Use Gross Lot Size (EX)
    5)BOM Selection ID 01
    6)Tab Planned Independent requirement details filled
    Now in Plant TAB when i give my plant id  the message is REQUIREMENT PLANNING IS NOT ACTIVE FOR MY PLANT CODE.
    Message no. 61139
    Please tell me how to make it active.
    Thanks in advance
    Rupesh Jha

    Dear Rupesh,
    Plz Refer to Mr. Mangalraj inputs on LTP
    1.A plannig scenario has to be created for a plant in T code MS31 & for the same Planning scenario
    configuration settings has to be made in OPU5 for the planned orders for LTP.
    2.Requirements has to be given in MD61 in an inactive version and also after giving the requirements
    kindly remove the tick mark against version- active check box.
    3.Assign this plan to the planning scenario in MS32,release it and ensure the planning file entries are
    entered or created,the same can be checked using MS21.
    4.After taking LTP simulation run in MS02(individual material) or MS01 you can see the simulated
    planned orders obtained in MS04 T code.
    5.These Simulated planned orders can't be converted into production orders or it cant be used for any
    business confirmation purpose.
    6. For capacity planning analysis,use T Code CM38,
    Before that Ensure for all the work centers in CR03 which are used for operation under capacity header
    you have included the check box for Long term planning,otherwise in CM38 you can't see any capacity
    requirements data.
    7.Before executing CM38,ensure under settings---> general you are giving the period settings properly.
    Revert back incase of any more clarifications required.
    Regards
    kumar

  • Long term Planning in SAP

    Hi Gurus,
    I am new to SAP,this my 1st query in SDN.
    I have been given sales figures of last 5 years of particular organization and i have been told to create a long term planning report in SAP please tell me the detailed methodology of create a long plan for the next 6 months in SAP.
    Regards
    Krish

    Dear Krish,
    LTP is a planning tool,where simulated planned orders's are obtained for an inactive plan.
    It will be more helpful from production perspective.
    To carry out an annual planning or a rolling quarterly planning run you require information on the future stock and requirements
    situation. This means you need to know how sales and operations planning influence resources. That is, whether the results
    of sales planning can actually be produced with capacity on hand. If such information is available it is possible to decide at an
    early date whether extra work centers will be required to cope with bottlenecks, or whether additional machinery will have to
    be purchased to reach the sales target.
    Steps for LTP:
    1.A plannig scenario has to be created for a plant in T code MS31 & for the same Planning scenario
    configuration settings has to be made in OPU5 for the planned orders for LTP.
    2.Requirements has to be given in MD61 in an inactive version and also after giving the requirements
    kindly remove the tick mark against version- active check box.
    3.Assign this plan to the planning scenario in MS32,release it and ensure the planning file entries are
    entered or created,the same can be checked using MS21.
    4.After taking LTP simulation run in MS02(individual material) or MS01 you can see the simulated
    planned orders obtained in MS04 T code.
    5.These Simulated planned orders can't be converted into production orders or it cant be used for any
    business confirmation purpose.
    6. For capacity planning analysis,use T Code CM38,
    Before that Ensure for all the work centers in CR03 which are used for operation under capacity header
    you have included the check box for Long term planning,otherwise in CM38 you can't see any capacity requirements data.
    7.Before executing CM38,ensure under settings---> general you are giving the period settings properly.
    8.Use T Code KSPP to transfer the planned activity requirements for production.
    Revert back incase of any more clarifications required.
    Regards
    Mangalraj.S

  • Long-term planning: planning details of work center capacity

    Hi,
    we need to know what is the effect on planned production orders (generated by MPS, transaction MD40) of the flag <b>&#8220;long-term planning&#8221;</b> in planning details of work center capacity (table name: RC68K; field name: KAPLPL). We made a test  analyzing planned orders scheduling details in <i>Stock requirements list</i> (MD04) and in the <i>Planning table</i> (CM21) in both cases: with "long-term planning" flag set and without this flag for the same work center.
    The schedule of planned production order on that work center is the same in the two instance.
    Could you suggest us something?
    Thank you.

    Hi Rudy,
    Purpose for carrying out Long Term Planning to simulate impact of Future Demand Program on
    u2022 Material Requirements
    u2022 Capacity Requirements
    u2022 Material Cost budgeting (activity by Accounts dept.)
    T.Codes used -
    u2022 Demand      MD61, MD62, MD63
    u2022 Scenario Creation     MS31, MS32, MS33
    u2022 LTP Variant  Creation & Execution     MSBT, SM37
    u2022 LTP statistics Evaluation     SM37, MS04
    u2022 Data Set Up     MS70, MSB&
    u2022 Evaluation based on Set up data     MCB), MCEA, MCEB, MCEC
    u2022 Capacity Evaluation     CM38
    To Summarize -
    u2022 In long-term planning, production plans for future demand programs are simulated using MRP runs with reference to the planning scenarios.
    u2022 The parameters for the simulation in the simulation planning area are defined in the scenario.
    u2022 The Evaluation of LTP Statistics enables identification of Material for which LTP processing was terminated.
    u2022 The Data set for purchasing & Inventory Control enables reports for demand analysis
    u2022 LTP run with setting for u201CLead time scheduling and capacity planningu201D enables simulation of capacity situation/overload on work centers.
    Hope it is helpful to you.
    Srini

  • LONG TERM PLANNING-pLANNING SCENARIO

    Hello friends,
                       I am using long term planning and creating a long term planning scenario.
    Where the version created of PIR is allocated to the planning scenario?how? give me the steps..
    regards,
    Ajay

    In MS32
    folow the menu path
    Edit --> Pl ind requirement
    in the pop up  screen, enter the varsion you have created for LTP, leave blank vsrion to be replaced... and click on confirm..
    it will asign the PIR version to LTP.

  • Long Term Planning-Planning File Entry

    Hi Gurus/Friends
    In the long term planning after PIR with inactive version and creating Scenario, assinging versions, Plants,....then
    during Release+Save it is giving the Result of Planning File Entries
    Logically the system has suppose to give the Number of Planning File Entries in Propotionate to the Specific Planning Scenario number and materials inside
    But it is giving for all the Materials inside the Plant
    Is there any settings to restrict the Planning File Entry creation w.r.t Planning scenario during Release+Save
    other than the solutions through Transaction MS20,MS22 and MSAB
    (Because during Release+save logically it has to call the MS22 t.code  and do planning file entries for the materials in that scenario)
    Awaiting for reply
    thanks
    K.Prabakaran

    Hi,
    Please Refer Below SAP help .
    *Releasing a planning scenario*
    You first have to release a planning scenario before you can plan it in the long-term planning run. When you release the planning scenario, the system creates planning file entries for all materials in all the plants allocated to the planning scenario. There is a separate planning file entry for this purpose. This guarantees that your operative planning is kept completely separate from your simulative planning. This long-term planning file contains all the materials that are also contained in the operative planning file. After the release, every change relevant to MRP triggers an entry in the planning file as in operative planning.
    Pradeep
    Edited by: Pradeep Kumar on May 9, 2008 4:22 PM

  • MS05 Long Term Planning

    I need  to stock available qty at long term planing (ms05) not calculate some location that qty status nettable.
    Example : Location   yy   stock onhand 100 EA   (Nettable)
                    Location   xx   stock onhand 10  EA    (Nettable)
         MRP                          display stock available 100  ea  but
         Long Term Planning     display  stock available 110  ea  (I need to display       100 ea  same MRP because MRP can set config exclude from MRP)  
    Please advise me?

    Hi,
    Can you make this Location stock XX as blocked or Restricted stock, then you will be able to exclude it from the Net requirement calculation.
    By deselecting the Blocked Stock or Restricted use stock for avaialbile stock in Avaialble stock configuration.

  • Vendor's long term plans regarding actualizations

    Hi,
    Possibly we will decide in 2014 to purchase MBP.
    It will be than the first Apple's product in our environment.
    If it should run that way we expect to use the mbp for approximately
    next 10 years.
    How does the Apple's current long term plans conform with the above target
    regarding actualizations (bug fixes, security patches) for
    OS and all other on-board software of mbp version currently in sell?

    molom wrote:
    dav7 wrote:
    Oh, and the medium I want to use needs to scale high. Very high. Into the order of more than a decent amount of TBs... like, say, 40 or 50. Of course that nice, round figure wouldn't pop up out of nowhere the day I have my plans in order, it'd grow - slowly - over time. So not only do I need something scalable, I need something that can scale slowly.
    So kinda like a NAS or external HDD type of solution, except one that doesn't use failure-prone media like HDDs. Unless there's a kind of hard disk out there that doesn't fail very "easily" and lasts in an order of years?
    -dav7
    I believe there is nothing that exists in the world, unless you pay huge money for Solid State Hard Drives. The only solution I see is using a bunch of rewritable double layer Blu-ray discs. I don't think there is any proper solution for what your looking for. Your looking for the perfect that doesn't exist.
    I'm not sure how long SSDs will last and I don't think there is any reliable information out there, wether an SSD I plugin now will still work in ten years. Plus you would need one hell of a lot SSDs to store Terabytes of data. BlueRay is probably worse than DVD regarding reliability, until the manufacturers get more experience with them.
    Am I the only one to see a pattern with dav7 opening threads looking for things which don't exist?
    Last edited by Garns (2008-10-08 13:39:29)

Maybe you are looking for