Long term planning: What comes after SAPGUI for Windows 7.20?

Is there more than
[https://service.sap.com/sap/support/notes/147519 Note 147519 - Maintenance strategy / deadlines 'SAP GUI'] saying:
You can be certain that as long as SAP supports any application based on Dynpro technology there will be a supported SAP GUI for Windows release.
Kind regards, Rudi

Hello Rudi,
after 7.20 7.30 will come
7.30 is planned for Q2/2012.
Regards,
Martin

Similar Messages

Excluding storage location from MRP run in Long Term Planning

Hi,friends,
In my scenario , i want to exclude storage location from MRP run in long term planning.When i set storage location MRP indicator "2" in SPRO and SLoc MRP indicator "1" MRP4 in material master, i can exclude the storage location after run MRP with MD01/MD02,and i can see the expected result in MD04.But in Long Term Planning scenario the storage location can not be excluded after run MRP with MS01/MS02,and the requirements list in MS04 include the stock in the storage location i want to exclude. i dont know if i miss something.Plz give me some advice.
Regards
Joey

Hi,
Refer the OSS Note 208017 - LTP: Long-term planning and storage locations
==========================================================================
Symptom
In long-term planning (Transactions MSBT / MS01 / MS02 / MS03), the MRP indicator of a storage location for a material is not taken into account (material master, view MRP 2 [up to and including Release 3.1I] or MRP 4 [as of Release 4.0A]).
The storage locations excluded by MRP or planned separately are also planned in the plant segment.
Additional key words
LTP, MM01, MM02, MM03, master data, MRP indicator, LGORT ...
Cause and prerequisites
The MRP indicator for a certain storage location of a material is only taken into account in operative planning (requirements planning, MRP).
The long-term planning occurs exclusively at plant level.
Solution
This is no error. The system works as intended.
The individual storage locations should not be distinguished in the long-term planning, in order to perform a comprehensive long-term planning.
This is important, for example, within the kanban processing where the storage locations with kanban MRP are excluded from the MRP, but in spite of that should be included in the long-term planning.
==========================================================================
Regards,
Siva

Long Term Planning : Requirements from "Consumption based planning" missing

Hello,
I'm trying to use long term planning ( MSBT,MS01..) for simulation. In the scenario I've set up I want to have all actual requrements and orders as well as fixed orders.
The problem is that requirements(=forecast) for materials with consumption based planning ( MRP type =VV ) are not transferred from the operative planning. How can this be achieved ?
Best Regards
Bernt

Hi,
Hard to say... have you looked in the details of the VV MRP setting, your LTP scenario, or your copy transaction in case there is some parameter about this?
In case you are looking for information about this process, here is a good document with a detailed description of the Long-Term Planning Process in SAP (with detailed T-codes as well): http://expertplug.com/materials/training/long-term-planning-in-sap
You have a preview and a detailed description to see if it suits your needs.
Cheers
Matthieu

Datasources for Long term Planning

Hi Guys,
Our client is planning to implement Production Planning - Long term planning for next release. I did enough searching to find out different SAP delivered Data sources and different tables that are involved in LTP but was unsuccesful. Can anybody guide me by providing the list of datasources and tables.
Thank you,
Regards,
Vamsi.

Hi Vamsi,
This blog will give all list of all Infocubes, Infosources and Datasources which are relted to Production Planning.
http://help.sap.com/saphelp_nw70/helpdata/EN/12/c770376ec62c7ee10000009b38f8cf/frameset.htm
Hope it helps you
Nagaraju.V

T399D - Long-term planning allowed for a plant

Hi gurus,
I was checking the table T399D and it has the "Long-term planning allowed for a plant" field (T399D-SIMPL), but, I do not know where I can customise this!
I was checking OMI8 and OPPQ (Parameters for DS section) transactions, but, I cannot find this field.
Could you help me in order to know where I can customise this?
Kind regards,
Sandra

Hi Sandra,
As it is correctly said that there is not much configuration required to Run LTP, but what you basically need to maintain/configure is as follows-
To carry out an annual planning or a rolling quarterly planning run you require information on the
future stock and requirements situation. This means you need to know how sales and operations
planning influence resources(conceptually)-
In long-term planning you can also plan materials that usually require very little planning in
operative planning, such as, materials planned using reorder point planning, bulk material, and
materials planned using KANBAN. In long-term planning, you can plan these materials as you
would MRP materials. This provides you with an overview of how these materials influence the
demand program.
The materials you want to plan in long-term planning must have already been planned in
operative MRP.Apart from above conceptual knowledge what else you require to configure /maintain is-
Planning Scenario(If you are running wity reference to it)-MS31
And run it through MS02(with reference to planning scenario) where you have to put mandatory MRP Control Parameters according to your business process eg.Processing key,create MRP list,planning mode,scheduling,firming planned orders.
Hope it fulfils your purpose at some extent.
Regards
Chandra

Capacity requirement for long term planning and make to order planning

hello,
anybody please guide me.
my client using make to order scenarion and we are doing regulaly MRP run is MD50 with refernce to sales order.
sales orders planning will follow for 2 to 3 months.
at the same time my client wants to do long term planning also. to analize the capacity.
for that he is creatind planning scenario and multi level planning with MS02 also.
But the problem is when they are checking capacity requirement in cm38 it is showing only planning scenario load only. my client wants existing load and longterm planning load also. so they can plan the planning is sutibale in existing plan.
so how can i get both plan in CM 38or is there any other T.code to get that data.
please suggest me
Thanks & Regards
Bhakta

Hi Pierre and Rajesh,
When we create the simulation version, you have the possibility to choose the short-term planning. My point of view is, you can use the LTP fonction to do your scheduling for ex the next 3 months.
I think it's what Pierre did. Am I right ?
between to scheduling scenario to deliver my customer. With the simulation mode I can do my scheduling + use the MRP simulation to check if the raw material are available or not. Then use the MD04 to do the comparaison (or MS04 to compare between 2 scenario).
But I found 2 problems :
First : I don't find the parameters to show in the graphic MFS0, the planed fix order (I can only see the process order)
Second : When my scheduling is finished, I want to update my operational planning with the simulation version. But I don't want to do article by article : when you have 400 references (raw mat, packaging, finish goods) it's impossible (same issue like Pierre)
Have you found a solution for this 2 points ?

Long term planning in ECC for materials planned in SAP APO

Hi SAP PP and APO Experts,
I would like to know whether it is possible to plan a material in SAP ECC with Long Term Planning to create Simulative Planned Orders in ECC, when the MRP Type for the material is set to X0 (Planning in SAP APO).
Warm regards,
Prem

Hi Dhaivakumar,
Appreciate your prompt response.
My business is MTS. I have made all settings for LTP planning for the material. (M|RP Type is set to X0-Planning in APO). When I execute the transaction MS02, I get the error message "Material 5200000013 J310 is not planned automatically. Message no. 61008". The details of the error message is:
The material 5200000013 in plant J310 or in MRP area is not included in automatic MRP because
either the MRP data for plant J310 or MRP area has not been created
or an MRP type has been entered for the material in plant J310 or MRP area that does not allow automatic MRP.
Warm regards,
Prem

I neglected to note what comes after the @ sign for e-print.

What comes after @ in eprint address?

Hi,
The address should end with @hpeprint.com
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Long Term Planning for Quotation

Hi
My client wants to plan Long term Planning w.r.t to sales quotation and not with demand planning.Kindly provide me the details steps.
Regards
P.Srinivasan

Dear shankar,
I'm not sure whether LTP can fulfill your requirement completely,but for such requirements generally LTP run for an inatice version
can show the capacity required for meeting such a demand for the mentioned period and also the procurement analysis.
For checking the split of requirements into multiple production line try by creating different production versions and maintain quota
for the same.
Check this link to explore more,
[Quota Arrangement in LTP|Re: Quota Arrangement in LTP]
Regards
S Mangalraj

Implementing Long-Term Planning

Dear Guys,
Is that possible to implement Long-Term Planning (LTP) in SAP when there is no SOP module in the system. Would you please inform me the basic requirements or basic setup to implement LTP in SAP system.
Thank you in advance!

Hi Payam,
This is always recommended to implement LTP if you have long lead times for some procured parts, bottle necks in capacities for work centers and most important to plan about budget required for the production of those parts.
The above things you cannot check with STP/MTP and perform changes after the STP/MTP runs. But this you can do with LTP with diffrent scenarios and compare it till you satisfy.
You can do the precosting of the parts and check what would be your future costing and plant budget.
You can transfer the requireemnst of the critical parts to vendors well in advance after LTP run and before running the actual planning for the entire year, so the vendors will be well prepared to supply you the parts.
You can also checks the capacities required for the production before the STP run.
If this is OK then please close this thread.
Regards
TAJUDIN

Short, medium and long term planning in SNP

Hi,
can somebody explain me what Short, medium and long term planning mean in SNP?
Lets, say I have this scenario:
If I have a product with SNP horizon of 35 days, which means that the product is planned in SNP only after 35 days from today. Only PPDs deals with orders in these 35 days.
I have a 3 planning books
short term with 30 days from today
medium term with 7 months from today and
long term with 2 years from today.
When I say short, medium and long term planning in SNP what exactly happens in these ?? What do users usually do in these books?
SNP horizon is 35 days and the short term book is 30 days long, in which SNP does nothing. What's the use of this book?
Thanks.

When I say short, medium and long term planning in SNP what exactly happens in these ??
Nothing much from a technical stand point.
What do users usually do in these books?
Check the Time Bucket Profile for the different books. The short Term Book will be in days, the mid term in weeks and the long term in months/quarters etc. The different books allows users to see the keyfigures in different time-based aggregate level.
But if Heuristic is executed then behaviour will be different. Remember SNP Location Heuristic run uses the bucket of the data view to compute the Net Requirement and then try creating Receipts in each bucket within the time horizon of the data view using suitable master data. So if you run Location Heuristic in the short Term (daily) view then you will have many receipts one per day most likely. If you run in mid-term Weekly view then there are less number of receipts one receipt per week till 7 months. likewise for the long term view.
SNP horizon is 35 days and the short term book is 30 days long, in which SNP does nothing. What's the use of this book?
Maybe just to see the data. Location Heuristic run will not generate any new receipt.
Thanks,
Somnath

Long Term Planning-Planning File Entry

Hi Gurus/Friends
In the long term planning after PIR with inactive version and creating Scenario, assinging versions, Plants,....then
during Release+Save it is giving the Result of Planning File Entries
Logically the system has suppose to give the Number of Planning File Entries in Propotionate to the Specific Planning Scenario number and materials inside
But it is giving for all the Materials inside the Plant
Is there any settings to restrict the Planning File Entry creation w.r.t Planning scenario during Release+Save
other than the solutions through Transaction MS20,MS22 and MSAB
(Because during Release+save logically it has to call the MS22 t.code and do planning file entries for the materials in that scenario)
Awaiting for reply
thanks
K.Prabakaran

Hi,
Please Refer Below SAP help .
*Releasing a planning scenario*
You first have to release a planning scenario before you can plan it in the long-term planning run. When you release the planning scenario, the system creates planning file entries for all materials in all the plants allocated to the planning scenario. There is a separate planning file entry for this purpose. This guarantees that your operative planning is kept completely separate from your simulative planning. This long-term planning file contains all the materials that are also contained in the operative planning file. After the release, every change relevant to MRP triggers an entry in the planning file as in operative planning.
Pradeep
Edited by: Pradeep Kumar on May 9, 2008 4:22 PM

How to consider the Purchase Orders in Long Term Planning

Hi All,
I wanted to include the Purchase Orders of Finished Material in Long Term Planning.
I have selected the check box "Long-term planning: include firmed issues and receipts" in the Planning Scenario but after LTP run system is not considering the Purchase Orders of Finished Materials for Planning.
Regards,
Shailendra
Edited by: Shailendra Hadkar on Apr 5, 2010 12:41 PM

Dear,
Could you please explain usage of purchase orders for Finished product?
Regards,
SAP CONS

I can't see planned order in Long Term Planning Stock/requirements list.

Hi
I am trying to use Long Term Planning in SAP.
I created scenario dates from 01.03.2011 to 03.09.2011. Between those dates i entered planned independent requirements as 300.
When i went to Long Term Planning Stock/requirements list, i can see all planned independent requirements but i run Multilevel single-item planning and then when i went to Long Term Planning Stock/requirements list again, i couldnt see planned order for planned independent requirements.
So what is the problem? Can anyone help me please?
Thank you.

HI
check the planning scenario in MS31 and the PIR assignment in MS31 also check the plant assignement.
Check In MD61 you have enter PIRs in simulation version and the same version is to assigned in planning scenario
Also check T code OPU5 for LTP setting for planned orders
Regards
Anupam Sharma
Edited by: anupam sharma on Sep 3, 2010 2:33 PM

Long Term Planning MCB)

Hi,
Please suggest how to analyze the output of MCB) transaction for long term planning.
Thanks & Regards,
Nataraj

Hi there,
Could you please give more details such as what are your objectives, the type of material (high frequency demand, low frequency, etc) and the span of long term planning (1 year, 5 years, 10?).
Cheers,
Rodrigo

Long term planning: What comes after SAPGUI for Windows 7.20?

Similar Messages

Maybe you are looking for